arch/arm/mach-footbridge/include/mach/hardware.h

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  *  arch/arm/mach-footbridge/include/mach/hardware.h
   4  *
   5  *  Copyright (C) 1998-1999 Russell King.
   6  *
   7  *  This file contains the hardware definitions of the EBSA-285.
   8  */
   9 #ifndef __ASM_ARCH_HARDWARE_H
  10 #define __ASM_ARCH_HARDWARE_H
  11
  12 /*   Virtual      Physical      Size
  13  * 0xff800000   0x40000000      1MB     X-Bus
  14  * 0xff000000   0x7c000000      1MB     PCI I/O space
  15  * 0xfe000000   0x42000000      1MB     CSR
  16  * 0xfd000000   0x78000000      1MB     Outbound write flush (not supported)
  17  * 0xfc000000   0x79000000      1MB     PCI IACK/special space
  18  * 0xfb000000   0x7a000000      16MB    PCI Config type 1
  19  * 0xfa000000   0x7b000000      16MB    PCI Config type 0
  20  * 0xf9000000   0x50000000      1MB     Cache flush
  21  * 0xf0000000   0x80000000      16MB    ISA memory
  22  */
  23
  24 #define XBUS_SIZE               0x00100000
  25 #define XBUS_BASE               0xff800000
  26
  27 #define ARMCSR_SIZE             0x00100000
  28 #define ARMCSR_BASE             0xfe000000
  29
  30 #define WFLUSH_SIZE             0x00100000
  31 #define WFLUSH_BASE             0xfd000000
  32
  33 #define PCIIACK_SIZE            0x00100000
  34 #define PCIIACK_BASE            0xfc000000
  35
  36 #define PCICFG1_SIZE            0x01000000
  37 #define PCICFG1_BASE            0xfb000000
  38
  39 #define PCICFG0_SIZE            0x01000000
  40 #define PCICFG0_BASE            0xfa000000
  41
  42 #define PCIMEM_SIZE             0x01000000
  43 #define PCIMEM_BASE             0xf0000000
  44
  45 #define XBUS_CS2                0x40012000
  46
  47 #define XBUS_SWITCH             ((volatile unsigned char *)(XBUS_BASE + 0x12000))
  48 #define XBUS_SWITCH_SWITCH      ((*XBUS_SWITCH) & 15)
  49 #define XBUS_SWITCH_J17_13      ((*XBUS_SWITCH) & (1 << 4))
  50 #define XBUS_SWITCH_J17_11      ((*XBUS_SWITCH) & (1 << 5))
  51 #define XBUS_SWITCH_J17_9       ((*XBUS_SWITCH) & (1 << 6))
  52
  53 #define UNCACHEABLE_ADDR        (ARMCSR_BASE + 0x108)   /* CSR_ROMBASEMASK */
  54
  55
  56 /* PIC irq control */
  57 #define PIC_LO                  0x20
  58 #define PIC_MASK_LO             0x21
  59 #define PIC_HI                  0xA0
  60 #define PIC_MASK_HI             0xA1
  61
  62 /* GPIO pins */
  63 #define GPIO_CCLK               0x800
  64 #define GPIO_DSCLK              0x400
  65 #define GPIO_E2CLK              0x200
  66 #define GPIO_IOLOAD             0x100
  67 #define GPIO_RED_LED            0x080
  68 #define GPIO_WDTIMER            0x040
  69 #define GPIO_DATA               0x020
  70 #define GPIO_IOCLK              0x010
  71 #define GPIO_DONE               0x008
  72 #define GPIO_FAN                0x004
  73 #define GPIO_GREEN_LED          0x002
  74 #define GPIO_RESET              0x001
  75
  76 /* CPLD pins */
  77 #define CPLD_DS_ENABLE          8
  78 #define CPLD_7111_DISABLE       4
  79 #define CPLD_UNMUTE             2
  80 #define CPLD_FLASH_WR_ENABLE    1
  81
  82 #ifndef __ASSEMBLY__
  83 extern raw_spinlock_t nw_gpio_lock;
  84 extern void nw_gpio_modify_op(unsigned int mask, unsigned int set);
  85 extern void nw_gpio_modify_io(unsigned int mask, unsigned int in);
  86 extern unsigned int nw_gpio_read(void);
  87 extern void nw_cpld_modify(unsigned int mask, unsigned int set);
  88 #endif
  89
  90 #endif