arch/arm/mach-imx/platsmp.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2011 Freescale Semiconductor, Inc.
   4  * Copyright 2011 Linaro Ltd.
   5  */
   6
   7 #include <linux/init.h>
   8 #include <linux/of_address.h>
   9 #include <linux/of.h>
  10 #include <linux/smp.h>
  11
  12 #include <asm/cacheflush.h>
  13 #include <asm/page.h>
  14 #include <asm/smp_scu.h>
  15 #include <asm/mach/map.h>
  16
  17 #include "common.h"
  18 #include "hardware.h"
  19
  20 u32 g_diag_reg;
  21 static void __iomem *scu_base;
  22
  23 static struct map_desc scu_io_desc __initdata = {
  24         /* .virtual and .pfn are run-time assigned */
  25         .length         = SZ_4K,
  26         .type           = MT_DEVICE,
  27 };
  28
  29 void __init imx_scu_map_io(void)
  30 {
  31         unsigned long base;
  32
  33         /* Get SCU base */
  34         asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
  35
  36         scu_io_desc.virtual = IMX_IO_P2V(base);
  37         scu_io_desc.pfn = __phys_to_pfn(base);
  38         iotable_init(&scu_io_desc, 1);
  39
  40         scu_base = IMX_IO_ADDRESS(base);
  41 }
  42
  43 static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
  44 {
  45         imx_set_cpu_jump(cpu, v7_secondary_startup);
  46         imx_enable_cpu(cpu, true);
  47         return 0;
  48 }
  49
  50 /*
  51  * Initialise the CPU possible map early - this describes the CPUs
  52  * which may be present or become present in the system.
  53  */
  54 static void __init imx_smp_init_cpus(void)
  55 {
  56         int i, ncores;
  57
  58         ncores = scu_get_core_count(scu_base);
  59
  60         for (i = ncores; i < NR_CPUS; i++)
  61                 set_cpu_possible(i, false);
  62 }
  63
  64 void imx_smp_prepare(void)
  65 {
  66         scu_enable(scu_base);
  67 }
  68
  69 static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
  70 {
  71         imx_smp_prepare();
  72
  73         /*
  74          * The diagnostic register holds the errata bits.  Mostly bootloader
  75          * does not bring up secondary cores, so that when errata bits are set
  76          * in bootloader, they are set only for boot cpu.  But on a SMP
  77          * configuration, it should be equally done on every single core.
  78          * Read the register from boot cpu here, and will replicate it into
  79          * secondary cores when booting them.
  80          */
  81         asm("mrc p15, 0, %0, c15, c0, 1" : "=r" (g_diag_reg) : : "cc");
  82         sync_cache_w(&g_diag_reg);
  83 }
  84
  85 const struct smp_operations imx_smp_ops __initconst = {
  86         .smp_init_cpus          = imx_smp_init_cpus,
  87         .smp_prepare_cpus       = imx_smp_prepare_cpus,
  88         .smp_boot_secondary     = imx_boot_secondary,
  89 #ifdef CONFIG_HOTPLUG_CPU
  90         .cpu_die                = imx_cpu_die,
  91         .cpu_kill               = imx_cpu_kill,
  92 #endif
  93 };
  94
  95 /*
  96  * Initialise the CPU possible map early - this describes the CPUs
  97  * which may be present or become present in the system.
  98  */
  99 static void __init imx7_smp_init_cpus(void)
 100 {
 101         struct device_node *np;
 102         int i, ncores = 0;
 103
 104         /* The iMX7D SCU does not report core count, get it from DT */
 105         for_each_of_cpu_node(np)
 106                 ncores++;
 107
 108         for (i = ncores; i < NR_CPUS; i++)
 109                 set_cpu_possible(i, false);
 110 }
 111
 112 const struct smp_operations imx7_smp_ops __initconst = {
 113         .smp_init_cpus          = imx7_smp_init_cpus,
 114         .smp_boot_secondary     = imx_boot_secondary,
 115 #ifdef CONFIG_HOTPLUG_CPU
 116         .cpu_die                = imx_cpu_die,
 117         .cpu_kill               = imx_cpu_kill,
 118 #endif
 119 };
 120
 121 #define DCFG_CCSR_SCRATCHRW1    0x200
 122
 123 static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)
 124 {
 125         arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 126
 127         return 0;
 128 }
 129
 130 static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 131 {
 132         struct device_node *np;
 133         void __iomem *dcfg_base;
 134         unsigned long paddr;
 135
 136         np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
 137         dcfg_base = of_iomap(np, 0);
 138         of_node_put(np);
 139         BUG_ON(!dcfg_base);
 140
 141         paddr = __pa_symbol(secondary_startup);
 142         writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1);
 143
 144         iounmap(dcfg_base);
 145 }
 146
 147 const struct smp_operations ls1021a_smp_ops __initconst = {
 148         .smp_prepare_cpus       = ls1021a_smp_prepare_cpus,
 149         .smp_boot_secondary     = ls1021a_boot_secondary,
 150 };