1 // SPDX-License-Identifier: GPL-2.0-only
3 * Battery and Power Management code for the Sharp SL-C7xx and SL-Cxx00
6 * Copyright (c) 2004-2005 Richard Purdie
8 * Based on code written by Sharp for 2.4 kernels
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/interrupt.h>
16 #include <linux/platform_device.h>
17 #include <linux/apm-emulation.h>
18 #include <linux/timer.h>
19 #include <linux/delay.h>
20 #include <linux/leds.h>
21 #include <linux/suspend.h>
22 #include <linux/gpio.h>
25 #include <asm/mach-types.h>
27 #include "pxa2xx-regs.h"
29 #include "sharpsl_pm.h"
34 #define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */
35 #define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */
36 #define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */
37 #define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */
39 #define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */
40 #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */
41 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP 10 /* 10 msec */
42 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT 10 /* 10 msec */
43 #define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN 10 /* 10 msec */
44 #define SHARPSL_CHARGE_WAIT_TIME 15 /* 15 msec */
45 #define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */
46 #define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */
52 static int sharpsl_off_charge_battery(void);
53 static int sharpsl_check_battery_voltage(void);
55 static int sharpsl_check_battery_temp(void);
56 static int sharpsl_ac_check(void);
57 static int sharpsl_average_value(int ad
);
58 static void sharpsl_average_clear(void);
59 static void sharpsl_charge_toggle(struct work_struct
*private_
);
60 static void sharpsl_battery_thread(struct work_struct
*private_
);
66 struct sharpsl_pm_status sharpsl_pm
;
67 static DECLARE_DELAYED_WORK(toggle_charger
, sharpsl_charge_toggle
);
68 static DECLARE_DELAYED_WORK(sharpsl_bat
, sharpsl_battery_thread
);
69 DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger
);
73 struct battery_thresh sharpsl_battery_levels_acin
[] = {
116 struct battery_thresh sharpsl_battery_levels_noac
[] = {
159 /* MAX1111 Commands */
160 #define MAXCTRL_PD0 (1u << 0)
161 #define MAXCTRL_PD1 (1u << 1)
162 #define MAXCTRL_SGL (1u << 2)
163 #define MAXCTRL_UNI (1u << 3)
164 #define MAXCTRL_SEL_SH 4
165 #define MAXCTRL_STR (1u << 7)
167 extern int max1111_read_channel(int);
171 int sharpsl_pm_pxa_read_max1111(int channel
)
173 /* max1111 accepts channels from 0-3, however,
174 * it is encoded from 0-7 here in the code.
176 return max1111_read_channel(channel
>> 1);
179 static int get_percentage(int voltage
)
181 int i
= sharpsl_pm
.machinfo
->bat_levels
- 1;
182 int bl_status
= sharpsl_pm
.machinfo
->backlight_get_status
? sharpsl_pm
.machinfo
->backlight_get_status() : 0;
183 struct battery_thresh
*thresh
;
185 if (sharpsl_pm
.charge_mode
== CHRG_ON
)
186 thresh
= bl_status
? sharpsl_pm
.machinfo
->bat_levels_acin_bl
: sharpsl_pm
.machinfo
->bat_levels_acin
;
188 thresh
= bl_status
? sharpsl_pm
.machinfo
->bat_levels_noac_bl
: sharpsl_pm
.machinfo
->bat_levels_noac
;
190 while (i
> 0 && (voltage
> thresh
[i
].voltage
))
193 return thresh
[i
].percentage
;
196 static int get_apm_status(int voltage
)
198 int low_thresh
, high_thresh
;
200 if (sharpsl_pm
.charge_mode
== CHRG_ON
) {
201 high_thresh
= sharpsl_pm
.machinfo
->status_high_acin
;
202 low_thresh
= sharpsl_pm
.machinfo
->status_low_acin
;
204 high_thresh
= sharpsl_pm
.machinfo
->status_high_noac
;
205 low_thresh
= sharpsl_pm
.machinfo
->status_low_noac
;
208 if (voltage
>= high_thresh
)
209 return APM_BATTERY_STATUS_HIGH
;
210 if (voltage
>= low_thresh
)
211 return APM_BATTERY_STATUS_LOW
;
212 return APM_BATTERY_STATUS_CRITICAL
;
215 void sharpsl_battery_kick(void)
217 schedule_delayed_work(&sharpsl_bat
, msecs_to_jiffies(125));
220 static void sharpsl_battery_thread(struct work_struct
*private_
)
222 int voltage
, percent
, apm_status
, i
;
224 if (!sharpsl_pm
.machinfo
)
227 sharpsl_pm
.battstat
.ac_status
= (sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_ACIN
) ? APM_AC_ONLINE
: APM_AC_OFFLINE
);
229 /* Corgi cannot confirm when battery fully charged so periodically kick! */
230 if (!sharpsl_pm
.machinfo
->batfull_irq
&& (sharpsl_pm
.charge_mode
== CHRG_ON
)
231 && time_after(jiffies
, sharpsl_pm
.charge_start_time
+ SHARPSL_CHARGE_ON_TIME_INTERVAL
))
232 schedule_delayed_work(&toggle_charger
, 0);
234 for (i
= 0; i
< 5; i
++) {
235 voltage
= sharpsl_pm
.machinfo
->read_devdata(SHARPSL_BATT_VOLT
);
240 voltage
= sharpsl_pm
.machinfo
->bat_levels_noac
[0].voltage
;
241 dev_warn(sharpsl_pm
.dev
, "Warning: Cannot read main battery!\n");
244 voltage
= sharpsl_average_value(voltage
);
245 apm_status
= get_apm_status(voltage
);
246 percent
= get_percentage(voltage
);
248 /* At low battery voltages, the voltage has a tendency to start
249 creeping back up so we try to avoid this here */
250 if ((sharpsl_pm
.battstat
.ac_status
== APM_AC_ONLINE
)
251 || (apm_status
== APM_BATTERY_STATUS_HIGH
)
252 || percent
<= sharpsl_pm
.battstat
.mainbat_percent
) {
253 sharpsl_pm
.battstat
.mainbat_voltage
= voltage
;
254 sharpsl_pm
.battstat
.mainbat_status
= apm_status
;
255 sharpsl_pm
.battstat
.mainbat_percent
= percent
;
258 dev_dbg(sharpsl_pm
.dev
, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage
,
259 sharpsl_pm
.battstat
.mainbat_status
, sharpsl_pm
.battstat
.mainbat_percent
, jiffies
);
261 /* Suspend if critical battery level */
262 if ((sharpsl_pm
.battstat
.ac_status
!= APM_AC_ONLINE
)
263 && (sharpsl_pm
.battstat
.mainbat_status
== APM_BATTERY_STATUS_CRITICAL
)
264 && !(sharpsl_pm
.flags
& SHARPSL_APM_QUEUED
)) {
265 sharpsl_pm
.flags
|= SHARPSL_APM_QUEUED
;
266 dev_err(sharpsl_pm
.dev
, "Fatal Off\n");
267 apm_queue_event(APM_CRITICAL_SUSPEND
);
270 schedule_delayed_work(&sharpsl_bat
, SHARPSL_BATCHK_TIME
);
273 void sharpsl_pm_led(int val
)
275 if (val
== SHARPSL_LED_ERROR
) {
276 dev_err(sharpsl_pm
.dev
, "Charging Error!\n");
277 } else if (val
== SHARPSL_LED_ON
) {
278 dev_dbg(sharpsl_pm
.dev
, "Charge LED On\n");
279 led_trigger_event(sharpsl_charge_led_trigger
, LED_FULL
);
281 dev_dbg(sharpsl_pm
.dev
, "Charge LED Off\n");
282 led_trigger_event(sharpsl_charge_led_trigger
, LED_OFF
);
286 static void sharpsl_charge_on(void)
288 dev_dbg(sharpsl_pm
.dev
, "Turning Charger On\n");
290 sharpsl_pm
.full_count
= 0;
291 sharpsl_pm
.charge_mode
= CHRG_ON
;
292 schedule_delayed_work(&toggle_charger
, msecs_to_jiffies(250));
293 schedule_delayed_work(&sharpsl_bat
, msecs_to_jiffies(500));
296 static void sharpsl_charge_off(void)
298 dev_dbg(sharpsl_pm
.dev
, "Turning Charger Off\n");
300 sharpsl_pm
.machinfo
->charge(0);
301 sharpsl_pm_led(SHARPSL_LED_OFF
);
302 sharpsl_pm
.charge_mode
= CHRG_OFF
;
304 schedule_delayed_work(&sharpsl_bat
, 0);
307 static void sharpsl_charge_error(void)
309 sharpsl_pm_led(SHARPSL_LED_ERROR
);
310 sharpsl_pm
.machinfo
->charge(0);
311 sharpsl_pm
.charge_mode
= CHRG_ERROR
;
314 static void sharpsl_charge_toggle(struct work_struct
*private_
)
316 dev_dbg(sharpsl_pm
.dev
, "Toggling Charger at time: %lx\n", jiffies
);
318 if (!sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_ACIN
)) {
319 sharpsl_charge_off();
321 } else if ((sharpsl_check_battery_temp() < 0) || (sharpsl_ac_check() < 0)) {
322 sharpsl_charge_error();
326 sharpsl_pm_led(SHARPSL_LED_ON
);
327 sharpsl_pm
.machinfo
->charge(0);
328 mdelay(SHARPSL_CHARGE_WAIT_TIME
);
329 sharpsl_pm
.machinfo
->charge(1);
331 sharpsl_pm
.charge_start_time
= jiffies
;
334 static void sharpsl_ac_timer(struct timer_list
*unused
)
336 int acin
= sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_ACIN
);
338 dev_dbg(sharpsl_pm
.dev
, "AC Status: %d\n", acin
);
340 sharpsl_average_clear();
341 if (acin
&& (sharpsl_pm
.charge_mode
!= CHRG_ON
))
343 else if (sharpsl_pm
.charge_mode
== CHRG_ON
)
344 sharpsl_charge_off();
346 schedule_delayed_work(&sharpsl_bat
, 0);
350 static irqreturn_t
sharpsl_ac_isr(int irq
, void *dev_id
)
352 /* Delay the event slightly to debounce */
353 /* Must be a smaller delay than the chrg_full_isr below */
354 mod_timer(&sharpsl_pm
.ac_timer
, jiffies
+ msecs_to_jiffies(250));
359 static void sharpsl_chrg_full_timer(struct timer_list
*unused
)
361 dev_dbg(sharpsl_pm
.dev
, "Charge Full at time: %lx\n", jiffies
);
363 sharpsl_pm
.full_count
++;
365 if (!sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_ACIN
)) {
366 dev_dbg(sharpsl_pm
.dev
, "Charge Full: AC removed - stop charging!\n");
367 if (sharpsl_pm
.charge_mode
== CHRG_ON
)
368 sharpsl_charge_off();
369 } else if (sharpsl_pm
.full_count
< 2) {
370 dev_dbg(sharpsl_pm
.dev
, "Charge Full: Count too low\n");
371 schedule_delayed_work(&toggle_charger
, 0);
372 } else if (time_after(jiffies
, sharpsl_pm
.charge_start_time
+ SHARPSL_CHARGE_FINISH_TIME
)) {
373 dev_dbg(sharpsl_pm
.dev
, "Charge Full: Interrupt generated too slowly - retry.\n");
374 schedule_delayed_work(&toggle_charger
, 0);
376 sharpsl_charge_off();
377 sharpsl_pm
.charge_mode
= CHRG_DONE
;
378 dev_dbg(sharpsl_pm
.dev
, "Charge Full: Charging Finished\n");
382 /* Charging Finished Interrupt (Not present on Corgi) */
383 /* Can trigger at the same time as an AC status change so
384 delay until after that has been processed */
385 static irqreturn_t
sharpsl_chrg_full_isr(int irq
, void *dev_id
)
387 if (sharpsl_pm
.flags
& SHARPSL_SUSPENDED
)
390 /* delay until after any ac interrupt */
391 mod_timer(&sharpsl_pm
.chrg_full_timer
, jiffies
+ msecs_to_jiffies(500));
396 static irqreturn_t
sharpsl_fatal_isr(int irq
, void *dev_id
)
400 if (!sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_LOCK
)) {
401 dev_err(sharpsl_pm
.dev
, "Battery now Unlocked! Suspending.\n");
405 if (!sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_FATAL
)) {
406 dev_err(sharpsl_pm
.dev
, "Fatal Batt Error! Suspending.\n");
410 if (!(sharpsl_pm
.flags
& SHARPSL_APM_QUEUED
) && is_fatal
) {
411 sharpsl_pm
.flags
|= SHARPSL_APM_QUEUED
;
412 apm_queue_event(APM_CRITICAL_SUSPEND
);
419 * Maintain an average of the last 10 readings
421 #define SHARPSL_CNV_VALUE_NUM 10
422 static int sharpsl_ad_index
;
424 static void sharpsl_average_clear(void)
426 sharpsl_ad_index
= 0;
429 static int sharpsl_average_value(int ad
)
432 static int sharpsl_ad
[SHARPSL_CNV_VALUE_NUM
+1];
434 if (sharpsl_pm
.battstat
.mainbat_status
!= APM_BATTERY_STATUS_HIGH
) {
435 sharpsl_ad_index
= 0;
439 sharpsl_ad
[sharpsl_ad_index
] = ad
;
441 if (sharpsl_ad_index
>= SHARPSL_CNV_VALUE_NUM
) {
442 for (i
= 0; i
< (SHARPSL_CNV_VALUE_NUM
-1); i
++)
443 sharpsl_ad
[i
] = sharpsl_ad
[i
+1];
444 sharpsl_ad_index
= SHARPSL_CNV_VALUE_NUM
- 1;
446 for (i
= 0; i
< sharpsl_ad_index
; i
++)
447 ad_val
+= sharpsl_ad
[i
];
449 return ad_val
/ sharpsl_ad_index
;
453 * Take an array of 5 integers, remove the maximum and minimum values
454 * and return the average.
456 static int get_select_val(int *val
)
458 int i
, j
, k
, temp
, sum
= 0;
463 for (i
= 1; i
< 5; i
++) {
473 for (i
= 3; i
>= 0; i
--) {
480 for (i
= 0; i
< 5; i
++)
481 if (i
!= j
&& i
!= k
)
484 dev_dbg(sharpsl_pm
.dev
, "Average: %d from values: %d, %d, %d, %d, %d\n", sum
/3, val
[0], val
[1], val
[2], val
[3], val
[4]);
489 static int sharpsl_check_battery_temp(void)
493 /* Check battery temperature */
494 for (i
= 0; i
< 5; i
++) {
495 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP
);
496 sharpsl_pm
.machinfo
->measure_temp(1);
497 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP
);
498 buff
[i
] = sharpsl_pm
.machinfo
->read_devdata(SHARPSL_BATT_TEMP
);
499 sharpsl_pm
.machinfo
->measure_temp(0);
502 val
= get_select_val(buff
);
504 dev_dbg(sharpsl_pm
.dev
, "Temperature: %d\n", val
);
505 if (val
> sharpsl_pm
.machinfo
->charge_on_temp
) {
506 printk(KERN_WARNING
"Not charging: temperature out of limits.\n");
514 static int sharpsl_check_battery_voltage(void)
518 /* disable charge, enable discharge */
519 sharpsl_pm
.machinfo
->charge(0);
520 sharpsl_pm
.machinfo
->discharge(1);
521 mdelay(SHARPSL_WAIT_DISCHARGE_ON
);
523 if (sharpsl_pm
.machinfo
->discharge1
)
524 sharpsl_pm
.machinfo
->discharge1(1);
526 /* Check battery voltage */
527 for (i
= 0; i
< 5; i
++) {
528 buff
[i
] = sharpsl_pm
.machinfo
->read_devdata(SHARPSL_BATT_VOLT
);
529 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT
);
532 if (sharpsl_pm
.machinfo
->discharge1
)
533 sharpsl_pm
.machinfo
->discharge1(0);
535 sharpsl_pm
.machinfo
->discharge(0);
537 val
= get_select_val(buff
);
538 dev_dbg(sharpsl_pm
.dev
, "Battery Voltage: %d\n", val
);
540 if (val
< sharpsl_pm
.machinfo
->charge_on_volt
)
547 static int sharpsl_ac_check(void)
549 int temp
, i
, buff
[5];
551 for (i
= 0; i
< 5; i
++) {
552 buff
[i
] = sharpsl_pm
.machinfo
->read_devdata(SHARPSL_ACIN_VOLT
);
553 mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN
);
556 temp
= get_select_val(buff
);
557 dev_dbg(sharpsl_pm
.dev
, "AC Voltage: %d\n", temp
);
559 if ((temp
> sharpsl_pm
.machinfo
->charge_acin_high
) || (temp
< sharpsl_pm
.machinfo
->charge_acin_low
)) {
560 dev_err(sharpsl_pm
.dev
, "Error: AC check failed: voltage %d.\n", temp
);
568 static int sharpsl_pm_suspend(struct platform_device
*pdev
, pm_message_t state
)
570 sharpsl_pm
.flags
|= SHARPSL_SUSPENDED
;
571 flush_delayed_work(&toggle_charger
);
572 flush_delayed_work(&sharpsl_bat
);
574 if (sharpsl_pm
.charge_mode
== CHRG_ON
)
575 sharpsl_pm
.flags
|= SHARPSL_DO_OFFLINE_CHRG
;
577 sharpsl_pm
.flags
&= ~SHARPSL_DO_OFFLINE_CHRG
;
582 static int sharpsl_pm_resume(struct platform_device
*pdev
)
584 /* Clear the reset source indicators as they break the bootloader upon reboot */
586 sharpsl_average_clear();
587 sharpsl_pm
.flags
&= ~SHARPSL_APM_QUEUED
;
588 sharpsl_pm
.flags
&= ~SHARPSL_SUSPENDED
;
593 static void corgi_goto_sleep(unsigned long alarm_time
, unsigned int alarm_enable
, suspend_state_t state
)
595 dev_dbg(sharpsl_pm
.dev
, "Time is: %08x\n", RCNR
);
597 dev_dbg(sharpsl_pm
.dev
, "Offline Charge Activate = %d\n", sharpsl_pm
.flags
& SHARPSL_DO_OFFLINE_CHRG
);
598 /* not charging and AC-IN! */
600 if ((sharpsl_pm
.flags
& SHARPSL_DO_OFFLINE_CHRG
) && (sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_ACIN
))) {
601 dev_dbg(sharpsl_pm
.dev
, "Activating Offline Charger...\n");
602 sharpsl_pm
.charge_mode
= CHRG_OFF
;
603 sharpsl_pm
.flags
&= ~SHARPSL_DO_OFFLINE_CHRG
;
604 sharpsl_off_charge_battery();
607 sharpsl_pm
.machinfo
->presuspend();
609 PEDR
= 0xffffffff; /* clear it */
611 sharpsl_pm
.flags
&= ~SHARPSL_ALARM_ACTIVE
;
612 if ((sharpsl_pm
.charge_mode
== CHRG_ON
) && ((alarm_enable
&& ((alarm_time
- RCNR
) > (SHARPSL_BATCHK_TIME_SUSPEND
+ 30))) || !alarm_enable
)) {
614 RTAR
= RCNR
+ SHARPSL_BATCHK_TIME_SUSPEND
;
615 dev_dbg(sharpsl_pm
.dev
, "Charging alarm at: %08x\n", RTAR
);
616 sharpsl_pm
.flags
|= SHARPSL_ALARM_ACTIVE
;
617 } else if (alarm_enable
) {
620 dev_dbg(sharpsl_pm
.dev
, "User alarm at: %08x\n", RTAR
);
622 dev_dbg(sharpsl_pm
.dev
, "No alarms set.\n");
627 sharpsl_pm
.machinfo
->postsuspend();
629 dev_dbg(sharpsl_pm
.dev
, "Corgi woken up from suspend: %08x\n", PEDR
);
632 static int corgi_enter_suspend(unsigned long alarm_time
, unsigned int alarm_enable
, suspend_state_t state
)
634 if (!sharpsl_pm
.machinfo
->should_wakeup(!(sharpsl_pm
.flags
& SHARPSL_ALARM_ACTIVE
) && alarm_enable
)) {
635 if (!(sharpsl_pm
.flags
& SHARPSL_ALARM_ACTIVE
)) {
636 dev_dbg(sharpsl_pm
.dev
, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
637 corgi_goto_sleep(alarm_time
, alarm_enable
, state
);
640 if (sharpsl_off_charge_battery()) {
641 dev_dbg(sharpsl_pm
.dev
, "Charging. Suspend...\n");
642 corgi_goto_sleep(alarm_time
, alarm_enable
, state
);
645 dev_dbg(sharpsl_pm
.dev
, "User triggered wakeup in offline charger.\n");
648 if ((!sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_LOCK
)) ||
649 (!sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_FATAL
))) {
650 dev_err(sharpsl_pm
.dev
, "Fatal condition. Suspend.\n");
651 corgi_goto_sleep(alarm_time
, alarm_enable
, state
);
658 static int corgi_pxa_pm_enter(suspend_state_t state
)
660 unsigned long alarm_time
= RTAR
;
661 unsigned int alarm_status
= ((RTSR
& RTSR_ALE
) != 0);
663 dev_dbg(sharpsl_pm
.dev
, "SharpSL suspending for first time.\n");
665 corgi_goto_sleep(alarm_time
, alarm_status
, state
);
667 while (corgi_enter_suspend(alarm_time
, alarm_status
, state
))
670 if (sharpsl_pm
.machinfo
->earlyresume
)
671 sharpsl_pm
.machinfo
->earlyresume();
673 dev_dbg(sharpsl_pm
.dev
, "SharpSL resuming...\n");
678 static int sharpsl_off_charge_error(void)
680 dev_err(sharpsl_pm
.dev
, "Offline Charger: Error occurred.\n");
681 sharpsl_pm
.machinfo
->charge(0);
682 sharpsl_pm_led(SHARPSL_LED_ERROR
);
683 sharpsl_pm
.charge_mode
= CHRG_ERROR
;
688 * Charging Control while suspended
689 * Return 1 - go straight to sleep
690 * Return 0 - sleep or wakeup depending on other factors
692 static int sharpsl_off_charge_battery(void)
696 dev_dbg(sharpsl_pm
.dev
, "Charge Mode: %d\n", sharpsl_pm
.charge_mode
);
698 if (sharpsl_pm
.charge_mode
== CHRG_OFF
) {
699 dev_dbg(sharpsl_pm
.dev
, "Offline Charger: Step 1\n");
702 if ((sharpsl_ac_check() < 0) || (sharpsl_check_battery_temp() < 0))
703 return sharpsl_off_charge_error();
706 sharpsl_pm_led(SHARPSL_LED_ON
);
707 sharpsl_pm
.machinfo
->charge(0);
708 mdelay(SHARPSL_CHARGE_WAIT_TIME
);
709 sharpsl_pm
.machinfo
->charge(1);
711 sharpsl_pm
.charge_mode
= CHRG_ON
;
712 sharpsl_pm
.full_count
= 0;
715 } else if (sharpsl_pm
.charge_mode
!= CHRG_ON
) {
719 if (sharpsl_pm
.full_count
== 0) {
722 dev_dbg(sharpsl_pm
.dev
, "Offline Charger: Step 2\n");
724 if ((sharpsl_check_battery_temp() < 0) || (sharpsl_check_battery_voltage() < 0))
725 return sharpsl_off_charge_error();
727 sharpsl_pm
.machinfo
->charge(0);
728 mdelay(SHARPSL_CHARGE_WAIT_TIME
);
729 sharpsl_pm
.machinfo
->charge(1);
730 sharpsl_pm
.charge_mode
= CHRG_ON
;
732 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME
);
736 /* Check if any wakeup event had occurred */
737 if (sharpsl_pm
.machinfo
->charger_wakeup())
739 /* Check for timeout */
740 if ((RCNR
- time
) > SHARPSL_WAIT_CO_TIME
)
742 if (sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_CHRGFULL
)) {
743 dev_dbg(sharpsl_pm
.dev
, "Offline Charger: Charge full occurred. Retrying to check\n");
744 sharpsl_pm
.full_count
++;
745 sharpsl_pm
.machinfo
->charge(0);
746 mdelay(SHARPSL_CHARGE_WAIT_TIME
);
747 sharpsl_pm
.machinfo
->charge(1);
753 dev_dbg(sharpsl_pm
.dev
, "Offline Charger: Step 3\n");
755 mdelay(SHARPSL_CHARGE_CO_CHECK_TIME
);
759 /* Check if any wakeup event had occurred */
760 if (sharpsl_pm
.machinfo
->charger_wakeup())
762 /* Check for timeout */
763 if ((RCNR
-time
) > SHARPSL_WAIT_CO_TIME
) {
764 if (sharpsl_pm
.full_count
> SHARPSL_CHARGE_RETRY_CNT
) {
765 dev_dbg(sharpsl_pm
.dev
, "Offline Charger: Not charged sufficiently. Retrying.\n");
766 sharpsl_pm
.full_count
= 0;
768 sharpsl_pm
.full_count
++;
771 if (sharpsl_pm
.machinfo
->read_devdata(SHARPSL_STATUS_CHRGFULL
)) {
772 dev_dbg(sharpsl_pm
.dev
, "Offline Charger: Charging complete.\n");
773 sharpsl_pm_led(SHARPSL_LED_OFF
);
774 sharpsl_pm
.machinfo
->charge(0);
775 sharpsl_pm
.charge_mode
= CHRG_DONE
;
781 #define sharpsl_pm_suspend NULL
782 #define sharpsl_pm_resume NULL
785 static ssize_t
battery_percentage_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
787 return sprintf(buf
, "%d\n", sharpsl_pm
.battstat
.mainbat_percent
);
790 static ssize_t
battery_voltage_show(struct device
*dev
, struct device_attribute
*attr
, char *buf
)
792 return sprintf(buf
, "%d\n", sharpsl_pm
.battstat
.mainbat_voltage
);
795 static DEVICE_ATTR_RO(battery_percentage
);
796 static DEVICE_ATTR_RO(battery_voltage
);
798 extern void (*apm_get_power_status
)(struct apm_power_info
*);
800 static void sharpsl_apm_get_power_status(struct apm_power_info
*info
)
802 info
->ac_line_status
= sharpsl_pm
.battstat
.ac_status
;
804 if (sharpsl_pm
.charge_mode
== CHRG_ON
)
805 info
->battery_status
= APM_BATTERY_STATUS_CHARGING
;
807 info
->battery_status
= sharpsl_pm
.battstat
.mainbat_status
;
809 info
->battery_flag
= (1 << info
->battery_status
);
810 info
->battery_life
= sharpsl_pm
.battstat
.mainbat_percent
;
814 static const struct platform_suspend_ops sharpsl_pm_ops
= {
815 .prepare
= pxa_pm_prepare
,
816 .finish
= pxa_pm_finish
,
817 .enter
= corgi_pxa_pm_enter
,
818 .valid
= suspend_valid_only_mem
,
822 static int sharpsl_pm_probe(struct platform_device
*pdev
)
826 if (!pdev
->dev
.platform_data
)
829 sharpsl_pm
.dev
= &pdev
->dev
;
830 sharpsl_pm
.machinfo
= pdev
->dev
.platform_data
;
831 sharpsl_pm
.charge_mode
= CHRG_OFF
;
832 sharpsl_pm
.flags
= 0;
834 timer_setup(&sharpsl_pm
.ac_timer
, sharpsl_ac_timer
, 0);
836 timer_setup(&sharpsl_pm
.chrg_full_timer
, sharpsl_chrg_full_timer
, 0);
838 led_trigger_register_simple("sharpsl-charge", &sharpsl_charge_led_trigger
);
840 sharpsl_pm
.machinfo
->init();
842 gpio_request(sharpsl_pm
.machinfo
->gpio_acin
, "AC IN");
843 gpio_direction_input(sharpsl_pm
.machinfo
->gpio_acin
);
844 gpio_request(sharpsl_pm
.machinfo
->gpio_batfull
, "Battery Full");
845 gpio_direction_input(sharpsl_pm
.machinfo
->gpio_batfull
);
846 gpio_request(sharpsl_pm
.machinfo
->gpio_batlock
, "Battery Lock");
847 gpio_direction_input(sharpsl_pm
.machinfo
->gpio_batlock
);
849 /* Register interrupt handlers */
850 irq
= gpio_to_irq(sharpsl_pm
.machinfo
->gpio_acin
);
851 if (request_irq(irq
, sharpsl_ac_isr
, IRQF_TRIGGER_RISING
| IRQF_TRIGGER_FALLING
, "AC Input Detect", sharpsl_ac_isr
)) {
852 dev_err(sharpsl_pm
.dev
, "Could not get irq %d.\n", irq
);
855 irq
= gpio_to_irq(sharpsl_pm
.machinfo
->gpio_batlock
);
856 if (request_irq(irq
, sharpsl_fatal_isr
, IRQF_TRIGGER_FALLING
, "Battery Cover", sharpsl_fatal_isr
)) {
857 dev_err(sharpsl_pm
.dev
, "Could not get irq %d.\n", irq
);
860 if (sharpsl_pm
.machinfo
->gpio_fatal
) {
861 irq
= gpio_to_irq(sharpsl_pm
.machinfo
->gpio_fatal
);
862 if (request_irq(irq
, sharpsl_fatal_isr
, IRQF_TRIGGER_FALLING
, "Fatal Battery", sharpsl_fatal_isr
)) {
863 dev_err(sharpsl_pm
.dev
, "Could not get irq %d.\n", irq
);
867 if (sharpsl_pm
.machinfo
->batfull_irq
) {
868 /* Register interrupt handler. */
869 irq
= gpio_to_irq(sharpsl_pm
.machinfo
->gpio_batfull
);
870 if (request_irq(irq
, sharpsl_chrg_full_isr
, IRQF_TRIGGER_RISING
, "CO", sharpsl_chrg_full_isr
)) {
871 dev_err(sharpsl_pm
.dev
, "Could not get irq %d.\n", irq
);
875 ret
= device_create_file(&pdev
->dev
, &dev_attr_battery_percentage
);
876 ret
|= device_create_file(&pdev
->dev
, &dev_attr_battery_voltage
);
878 dev_warn(&pdev
->dev
, "Failed to register attributes (%d)\n", ret
);
880 apm_get_power_status
= sharpsl_apm_get_power_status
;
883 suspend_set_ops(&sharpsl_pm_ops
);
886 mod_timer(&sharpsl_pm
.ac_timer
, jiffies
+ msecs_to_jiffies(250));
891 static void sharpsl_pm_remove(struct platform_device
*pdev
)
893 suspend_set_ops(NULL
);
895 device_remove_file(&pdev
->dev
, &dev_attr_battery_percentage
);
896 device_remove_file(&pdev
->dev
, &dev_attr_battery_voltage
);
898 led_trigger_unregister_simple(sharpsl_charge_led_trigger
);
900 free_irq(gpio_to_irq(sharpsl_pm
.machinfo
->gpio_acin
), sharpsl_ac_isr
);
901 free_irq(gpio_to_irq(sharpsl_pm
.machinfo
->gpio_batlock
), sharpsl_fatal_isr
);
903 if (sharpsl_pm
.machinfo
->gpio_fatal
)
904 free_irq(gpio_to_irq(sharpsl_pm
.machinfo
->gpio_fatal
), sharpsl_fatal_isr
);
906 if (sharpsl_pm
.machinfo
->batfull_irq
)
907 free_irq(gpio_to_irq(sharpsl_pm
.machinfo
->gpio_batfull
), sharpsl_chrg_full_isr
);
909 gpio_free(sharpsl_pm
.machinfo
->gpio_batlock
);
910 gpio_free(sharpsl_pm
.machinfo
->gpio_batfull
);
911 gpio_free(sharpsl_pm
.machinfo
->gpio_acin
);
913 if (sharpsl_pm
.machinfo
->exit
)
914 sharpsl_pm
.machinfo
->exit();
916 del_timer_sync(&sharpsl_pm
.chrg_full_timer
);
917 del_timer_sync(&sharpsl_pm
.ac_timer
);
920 static struct platform_driver sharpsl_pm_driver
= {
921 .probe
= sharpsl_pm_probe
,
922 .remove_new
= sharpsl_pm_remove
,
923 .suspend
= sharpsl_pm_suspend
,
924 .resume
= sharpsl_pm_resume
,
926 .name
= "sharpsl-pm",
930 static int sharpsl_pm_init(void)
932 return platform_driver_register(&sharpsl_pm_driver
);
935 static void sharpsl_pm_exit(void)
937 platform_driver_unregister(&sharpsl_pm_driver
);
940 late_initcall(sharpsl_pm_init
);
941 module_exit(sharpsl_pm_exit
);