2 * drivers/ata/pata_mpc52xx.c
4 * libata driver for the Freescale MPC52xx on-chip IDE interface
6 * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com>
7 * Copyright (C) 2003 Mipsys - Benjamin Herrenschmidt
9 * UDMA support based on patches by Freescale (Bernard Kuhn, John Rigby),
10 * Domen Puncer and Tim Yamin.
12 * This file is licensed under the terms of the GNU General Public License
13 * version 2. This program is licensed "as is" without any warranty of any
14 * kind, whether express or implied.
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/gfp.h>
20 #include <linux/delay.h>
21 #include <linux/libata.h>
23 #include <linux/of_address.h>
24 #include <linux/of_irq.h>
25 #include <linux/platform_device.h>
26 #include <linux/types.h>
28 #include <asm/cacheflush.h>
29 #include <asm/mpc52xx.h>
31 #include <linux/fsl/bestcomm/bestcomm.h>
32 #include <linux/fsl/bestcomm/bestcomm_priv.h>
33 #include <linux/fsl/bestcomm/ata.h>
35 #define DRV_NAME "mpc52xx_ata"
37 /* Private structures used by the driver */
38 struct mpc52xx_ata_timings
{
51 struct mpc52xx_ata_priv
{
52 unsigned int ipb_period
;
53 struct mpc52xx_ata __iomem
*ata_regs
;
54 phys_addr_t ata_regs_pa
;
56 struct mpc52xx_ata_timings timings
[2];
60 struct bcom_task
*dmatsk
;
61 const struct udmaspec
*udmaspec
;
62 const struct mdmaspec
*mdmaspec
;
63 int mpc52xx_ata_dma_last_write
;
68 /* ATAPI-4 PIO specs (in ns) */
69 static const u16 ataspec_t0
[5] = {600, 383, 240, 180, 120};
70 static const u16 ataspec_t1
[5] = { 70, 50, 30, 30, 25};
71 static const u16 ataspec_t2_8
[5] = {290, 290, 290, 80, 70};
72 static const u16 ataspec_t2_16
[5] = {165, 125, 100, 80, 70};
73 static const u16 ataspec_t2i
[5] = { 0, 0, 0, 70, 25};
74 static const u16 ataspec_t4
[5] = { 30, 20, 15, 10, 10};
75 static const u16 ataspec_ta
[5] = { 35, 35, 35, 35, 35};
77 #define CALC_CLKCYC(c,v) ((((v)+(c)-1)/(c)))
79 /* ======================================================================== */
81 /* ATAPI-4 MDMA specs (in clocks) */
92 static const struct mdmaspec mdmaspec66
[3] = {
93 { .t0M
= 32, .td
= 15, .th
= 2, .tj
= 2, .tkw
= 15, .tm
= 4, .tn
= 1 },
94 { .t0M
= 10, .td
= 6, .th
= 1, .tj
= 1, .tkw
= 4, .tm
= 2, .tn
= 1 },
95 { .t0M
= 8, .td
= 5, .th
= 1, .tj
= 1, .tkw
= 2, .tm
= 2, .tn
= 1 },
98 static const struct mdmaspec mdmaspec132
[3] = {
99 { .t0M
= 64, .td
= 29, .th
= 3, .tj
= 3, .tkw
= 29, .tm
= 7, .tn
= 2 },
100 { .t0M
= 20, .td
= 11, .th
= 2, .tj
= 1, .tkw
= 7, .tm
= 4, .tn
= 1 },
101 { .t0M
= 16, .td
= 10, .th
= 2, .tj
= 1, .tkw
= 4, .tm
= 4, .tn
= 1 },
104 /* ATAPI-4 UDMA specs (in clocks) */
125 static const struct udmaspec udmaspec66
[6] = {
126 { .tcyc
= 8, .t2cyc
= 16, .tds
= 1, .tdh
= 1, .tdvs
= 5, .tdvh
= 1,
127 .tfs
= 16, .tli
= 10, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
128 .tsr
= 3, .trfs
= 5, .trp
= 11, .tack
= 2, .tss
= 4,
130 { .tcyc
= 5, .t2cyc
= 11, .tds
= 1, .tdh
= 1, .tdvs
= 4, .tdvh
= 1,
131 .tfs
= 14, .tli
= 10, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
132 .tsr
= 2, .trfs
= 5, .trp
= 9, .tack
= 2, .tss
= 4,
134 { .tcyc
= 4, .t2cyc
= 8, .tds
= 1, .tdh
= 1, .tdvs
= 3, .tdvh
= 1,
135 .tfs
= 12, .tli
= 10, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
136 .tsr
= 2, .trfs
= 4, .trp
= 7, .tack
= 2, .tss
= 4,
138 { .tcyc
= 3, .t2cyc
= 6, .tds
= 1, .tdh
= 1, .tdvs
= 2, .tdvh
= 1,
139 .tfs
= 9, .tli
= 7, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
140 .tsr
= 2, .trfs
= 4, .trp
= 7, .tack
= 2, .tss
= 4,
142 { .tcyc
= 2, .t2cyc
= 4, .tds
= 1, .tdh
= 1, .tdvs
= 1, .tdvh
= 1,
143 .tfs
= 8, .tli
= 8, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
144 .tsr
= 2, .trfs
= 4, .trp
= 7, .tack
= 2, .tss
= 4,
146 { .tcyc
= 2, .t2cyc
= 2, .tds
= 1, .tdh
= 1, .tdvs
= 1, .tdvh
= 1,
147 .tfs
= 6, .tli
= 5, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
148 .tsr
= 2, .trfs
= 4, .trp
= 6, .tack
= 2, .tss
= 4,
152 static const struct udmaspec udmaspec132
[6] = {
153 { .tcyc
= 15, .t2cyc
= 31, .tds
= 2, .tdh
= 1, .tdvs
= 10, .tdvh
= 1,
154 .tfs
= 30, .tli
= 20, .tmli
= 3, .taz
= 2, .tzah
= 3, .tenv
= 3,
155 .tsr
= 7, .trfs
= 10, .trp
= 22, .tack
= 3, .tss
= 7,
157 { .tcyc
= 10, .t2cyc
= 21, .tds
= 2, .tdh
= 1, .tdvs
= 7, .tdvh
= 1,
158 .tfs
= 27, .tli
= 20, .tmli
= 3, .taz
= 2, .tzah
= 3, .tenv
= 3,
159 .tsr
= 4, .trfs
= 10, .trp
= 17, .tack
= 3, .tss
= 7,
161 { .tcyc
= 6, .t2cyc
= 12, .tds
= 1, .tdh
= 1, .tdvs
= 5, .tdvh
= 1,
162 .tfs
= 23, .tli
= 20, .tmli
= 3, .taz
= 2, .tzah
= 3, .tenv
= 3,
163 .tsr
= 3, .trfs
= 8, .trp
= 14, .tack
= 3, .tss
= 7,
165 { .tcyc
= 7, .t2cyc
= 12, .tds
= 1, .tdh
= 1, .tdvs
= 3, .tdvh
= 1,
166 .tfs
= 15, .tli
= 13, .tmli
= 3, .taz
= 2, .tzah
= 3, .tenv
= 3,
167 .tsr
= 3, .trfs
= 8, .trp
= 14, .tack
= 3, .tss
= 7,
169 { .tcyc
= 2, .t2cyc
= 5, .tds
= 0, .tdh
= 0, .tdvs
= 1, .tdvh
= 1,
170 .tfs
= 16, .tli
= 14, .tmli
= 2, .taz
= 1, .tzah
= 2, .tenv
= 2,
171 .tsr
= 2, .trfs
= 7, .trp
= 13, .tack
= 2, .tss
= 6,
173 { .tcyc
= 3, .t2cyc
= 6, .tds
= 1, .tdh
= 1, .tdvs
= 1, .tdvh
= 1,
174 .tfs
= 12, .tli
= 10, .tmli
= 3, .taz
= 2, .tzah
= 3, .tenv
= 3,
175 .tsr
= 3, .trfs
= 7, .trp
= 12, .tack
= 3, .tss
= 7,
179 /* ======================================================================== */
181 /* Bit definitions inside the registers */
182 #define MPC52xx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine reset */
183 #define MPC52xx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */
184 #define MPC52xx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt in PIO */
185 #define MPC52xx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports IORDY protocol */
187 #define MPC52xx_ATA_HOSTSTAT_TIP 0x80000000UL /* Transaction in progress */
188 #define MPC52xx_ATA_HOSTSTAT_UREP 0x40000000UL /* UDMA Read Extended Pause */
189 #define MPC52xx_ATA_HOSTSTAT_RERR 0x02000000UL /* Read Error */
190 #define MPC52xx_ATA_HOSTSTAT_WERR 0x01000000UL /* Write Error */
192 #define MPC52xx_ATA_FIFOSTAT_EMPTY 0x01 /* FIFO Empty */
193 #define MPC52xx_ATA_FIFOSTAT_ERROR 0x40 /* FIFO Error */
195 #define MPC52xx_ATA_DMAMODE_WRITE 0x01 /* Write DMA */
196 #define MPC52xx_ATA_DMAMODE_READ 0x02 /* Read DMA */
197 #define MPC52xx_ATA_DMAMODE_UDMA 0x04 /* UDMA enabled */
198 #define MPC52xx_ATA_DMAMODE_IE 0x08 /* Enable drive interrupt to CPU in DMA mode */
199 #define MPC52xx_ATA_DMAMODE_FE 0x10 /* FIFO Flush enable in Rx mode */
200 #define MPC52xx_ATA_DMAMODE_FR 0x20 /* FIFO Reset */
201 #define MPC52xx_ATA_DMAMODE_HUT 0x40 /* Host UDMA burst terminate */
203 #define MAX_DMA_BUFFERS 128
204 #define MAX_DMA_BUFFER_SIZE 0x20000u
206 /* Structure of the hardware registers */
209 /* Host interface registers */
210 u32 config
; /* ATA + 0x00 Host configuration */
211 u32 host_status
; /* ATA + 0x04 Host controller status */
212 u32 pio1
; /* ATA + 0x08 PIO Timing 1 */
213 u32 pio2
; /* ATA + 0x0c PIO Timing 2 */
214 u32 mdma1
; /* ATA + 0x10 MDMA Timing 1 */
215 u32 mdma2
; /* ATA + 0x14 MDMA Timing 2 */
216 u32 udma1
; /* ATA + 0x18 UDMA Timing 1 */
217 u32 udma2
; /* ATA + 0x1c UDMA Timing 2 */
218 u32 udma3
; /* ATA + 0x20 UDMA Timing 3 */
219 u32 udma4
; /* ATA + 0x24 UDMA Timing 4 */
220 u32 udma5
; /* ATA + 0x28 UDMA Timing 5 */
221 u32 share_cnt
; /* ATA + 0x2c ATA share counter */
225 u32 fifo_data
; /* ATA + 0x3c */
226 u8 fifo_status_frame
; /* ATA + 0x40 */
227 u8 fifo_status
; /* ATA + 0x41 */
229 u8 fifo_control
; /* ATA + 0x44 */
231 u16 fifo_alarm
; /* ATA + 0x4a */
233 u16 fifo_rdp
; /* ATA + 0x4e */
235 u16 fifo_wrp
; /* ATA + 0x52 */
237 u16 fifo_lfrdp
; /* ATA + 0x56 */
239 u16 fifo_lfwrp
; /* ATA + 0x5a */
241 /* Drive TaskFile registers */
242 u8 tf_control
; /* ATA + 0x5c TASKFILE Control/Alt Status */
244 u16 tf_data
; /* ATA + 0x60 TASKFILE Data */
246 u8 tf_features
; /* ATA + 0x64 TASKFILE Features/Error */
248 u8 tf_sec_count
; /* ATA + 0x68 TASKFILE Sector Count */
250 u8 tf_sec_num
; /* ATA + 0x6c TASKFILE Sector Number */
252 u8 tf_cyl_low
; /* ATA + 0x70 TASKFILE Cylinder Low */
254 u8 tf_cyl_high
; /* ATA + 0x74 TASKFILE Cylinder High */
256 u8 tf_dev_head
; /* ATA + 0x78 TASKFILE Device/Head */
258 u8 tf_command
; /* ATA + 0x7c TASKFILE Command/Status */
259 u8 dma_mode
; /* ATA + 0x7d ATA Host DMA Mode configuration */
264 /* ======================================================================== */
266 /* ======================================================================== */
269 /* MPC52xx low level hw control */
271 mpc52xx_ata_compute_pio_timings(struct mpc52xx_ata_priv
*priv
, int dev
, int pio
)
273 struct mpc52xx_ata_timings
*timing
= &priv
->timings
[dev
];
274 unsigned int ipb_period
= priv
->ipb_period
;
275 u32 t0
, t1
, t2_8
, t2_16
, t2i
, t4
, ta
;
277 if ((pio
< 0) || (pio
> 4))
280 t0
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_t0
[pio
]);
281 t1
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_t1
[pio
]);
282 t2_8
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_t2_8
[pio
]);
283 t2_16
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_t2_16
[pio
]);
284 t2i
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_t2i
[pio
]);
285 t4
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_t4
[pio
]);
286 ta
= CALC_CLKCYC(ipb_period
, 1000 * ataspec_ta
[pio
]);
288 timing
->pio1
= (t0
<< 24) | (t2_8
<< 16) | (t2_16
<< 8) | (t2i
);
289 timing
->pio2
= (t4
<< 24) | (t1
<< 16) | (ta
<< 8);
295 mpc52xx_ata_compute_mdma_timings(struct mpc52xx_ata_priv
*priv
, int dev
,
298 struct mpc52xx_ata_timings
*t
= &priv
->timings
[dev
];
299 const struct mdmaspec
*s
= &priv
->mdmaspec
[speed
];
301 if (speed
< 0 || speed
> 2)
304 t
->mdma1
= ((u32
)s
->t0M
<< 24) | ((u32
)s
->td
<< 16) | ((u32
)s
->tkw
<< 8) | s
->tm
;
305 t
->mdma2
= ((u32
)s
->th
<< 24) | ((u32
)s
->tj
<< 16) | ((u32
)s
->tn
<< 8);
312 mpc52xx_ata_compute_udma_timings(struct mpc52xx_ata_priv
*priv
, int dev
,
315 struct mpc52xx_ata_timings
*t
= &priv
->timings
[dev
];
316 const struct udmaspec
*s
= &priv
->udmaspec
[speed
];
318 if (speed
< 0 || speed
> 2)
321 t
->udma1
= ((u32
)s
->t2cyc
<< 24) | ((u32
)s
->tcyc
<< 16) | ((u32
)s
->tds
<< 8) | s
->tdh
;
322 t
->udma2
= ((u32
)s
->tdvs
<< 24) | ((u32
)s
->tdvh
<< 16) | ((u32
)s
->tfs
<< 8) | s
->tli
;
323 t
->udma3
= ((u32
)s
->tmli
<< 24) | ((u32
)s
->taz
<< 16) | ((u32
)s
->tenv
<< 8) | s
->tsr
;
324 t
->udma4
= ((u32
)s
->tss
<< 24) | ((u32
)s
->trfs
<< 16) | ((u32
)s
->trp
<< 8) | s
->tack
;
325 t
->udma5
= (u32
)s
->tzah
<< 24;
332 mpc52xx_ata_apply_timings(struct mpc52xx_ata_priv
*priv
, int device
)
334 struct mpc52xx_ata __iomem
*regs
= priv
->ata_regs
;
335 struct mpc52xx_ata_timings
*timing
= &priv
->timings
[device
];
337 out_be32(®s
->pio1
, timing
->pio1
);
338 out_be32(®s
->pio2
, timing
->pio2
);
339 out_be32(®s
->mdma1
, timing
->mdma1
);
340 out_be32(®s
->mdma2
, timing
->mdma2
);
341 out_be32(®s
->udma1
, timing
->udma1
);
342 out_be32(®s
->udma2
, timing
->udma2
);
343 out_be32(®s
->udma3
, timing
->udma3
);
344 out_be32(®s
->udma4
, timing
->udma4
);
345 out_be32(®s
->udma5
, timing
->udma5
);
350 mpc52xx_ata_hw_init(struct mpc52xx_ata_priv
*priv
)
352 struct mpc52xx_ata __iomem
*regs
= priv
->ata_regs
;
355 /* Clear share_cnt (all sample code do this ...) */
356 out_be32(®s
->share_cnt
, 0);
358 /* Configure and reset host */
359 out_be32(®s
->config
,
360 MPC52xx_ATA_HOSTCONF_IE
|
361 MPC52xx_ATA_HOSTCONF_IORDY
|
362 MPC52xx_ATA_HOSTCONF_SMR
|
363 MPC52xx_ATA_HOSTCONF_FR
);
367 out_be32(®s
->config
,
368 MPC52xx_ATA_HOSTCONF_IE
|
369 MPC52xx_ATA_HOSTCONF_IORDY
);
371 /* Set the time slot to 1us */
372 tslot
= CALC_CLKCYC(priv
->ipb_period
, 1000000);
373 out_be32(®s
->share_cnt
, tslot
<< 16);
375 /* Init timings to PIO0 */
376 memset(priv
->timings
, 0x00, 2*sizeof(struct mpc52xx_ata_timings
));
378 mpc52xx_ata_compute_pio_timings(priv
, 0, 0);
379 mpc52xx_ata_compute_pio_timings(priv
, 1, 0);
381 mpc52xx_ata_apply_timings(priv
, 0);
387 /* ======================================================================== */
389 /* ======================================================================== */
392 mpc52xx_ata_set_piomode(struct ata_port
*ap
, struct ata_device
*adev
)
394 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
397 pio
= adev
->pio_mode
- XFER_PIO_0
;
399 rv
= mpc52xx_ata_compute_pio_timings(priv
, adev
->devno
, pio
);
402 dev_err(ap
->dev
, "error: invalid PIO mode: %d\n", pio
);
406 mpc52xx_ata_apply_timings(priv
, adev
->devno
);
410 mpc52xx_ata_set_dmamode(struct ata_port
*ap
, struct ata_device
*adev
)
412 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
415 if (adev
->dma_mode
>= XFER_UDMA_0
) {
416 int dma
= adev
->dma_mode
- XFER_UDMA_0
;
417 rv
= mpc52xx_ata_compute_udma_timings(priv
, adev
->devno
, dma
);
419 int dma
= adev
->dma_mode
- XFER_MW_DMA_0
;
420 rv
= mpc52xx_ata_compute_mdma_timings(priv
, adev
->devno
, dma
);
425 "Trying to select invalid DMA mode %d\n",
430 mpc52xx_ata_apply_timings(priv
, adev
->devno
);
434 mpc52xx_ata_dev_select(struct ata_port
*ap
, unsigned int device
)
436 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
438 if (device
!= priv
->csel
)
439 mpc52xx_ata_apply_timings(priv
, device
);
441 ata_sff_dev_select(ap
, device
);
445 mpc52xx_ata_build_dmatable(struct ata_queued_cmd
*qc
)
447 struct ata_port
*ap
= qc
->ap
;
448 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
449 struct bcom_ata_bd
*bd
;
450 unsigned int read
= !(qc
->tf
.flags
& ATA_TFLAG_WRITE
), si
;
451 struct scatterlist
*sg
;
455 bcom_ata_rx_prepare(priv
->dmatsk
);
457 bcom_ata_tx_prepare(priv
->dmatsk
);
459 for_each_sg(qc
->sg
, sg
, qc
->n_elem
, si
) {
460 dma_addr_t cur_addr
= sg_dma_address(sg
);
461 u32 cur_len
= sg_dma_len(sg
);
464 unsigned int tc
= min(cur_len
, MAX_DMA_BUFFER_SIZE
);
465 bd
= (struct bcom_ata_bd
*)
466 bcom_prepare_next_buffer(priv
->dmatsk
);
470 bd
->src_pa
= (__force u32
) priv
->ata_regs_pa
+
471 offsetof(struct mpc52xx_ata
, fifo_data
);
472 bd
->dst_pa
= (__force u32
) cur_addr
;
475 bd
->src_pa
= (__force u32
) cur_addr
;
476 bd
->dst_pa
= (__force u32
) priv
->ata_regs_pa
+
477 offsetof(struct mpc52xx_ata
, fifo_data
);
480 bcom_submit_next_buffer(priv
->dmatsk
, NULL
);
486 if (count
> MAX_DMA_BUFFERS
) {
487 dev_alert(ap
->dev
, "dma table"
489 goto use_pio_instead
;
496 bcom_ata_reset_bd(priv
->dmatsk
);
501 mpc52xx_bmdma_setup(struct ata_queued_cmd
*qc
)
503 struct ata_port
*ap
= qc
->ap
;
504 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
505 struct mpc52xx_ata __iomem
*regs
= priv
->ata_regs
;
507 unsigned int read
= !(qc
->tf
.flags
& ATA_TFLAG_WRITE
);
510 if (!mpc52xx_ata_build_dmatable(qc
))
511 dev_alert(ap
->dev
, "%s: %i, return 1?\n",
514 /* Check FIFO is OK... */
515 if (in_8(&priv
->ata_regs
->fifo_status
) & MPC52xx_ATA_FIFOSTAT_ERROR
)
516 dev_alert(ap
->dev
, "%s: FIFO error detected: 0x%02x!\n",
517 __func__
, in_8(&priv
->ata_regs
->fifo_status
));
520 dma_mode
= MPC52xx_ATA_DMAMODE_IE
| MPC52xx_ATA_DMAMODE_READ
|
521 MPC52xx_ATA_DMAMODE_FE
;
523 /* Setup FIFO if direction changed */
524 if (priv
->mpc52xx_ata_dma_last_write
!= 0) {
525 priv
->mpc52xx_ata_dma_last_write
= 0;
527 /* Configure FIFO with granularity to 7 */
528 out_8(®s
->fifo_control
, 7);
529 out_be16(®s
->fifo_alarm
, 128);
531 /* Set FIFO Reset bit (FR) */
532 out_8(®s
->dma_mode
, MPC52xx_ATA_DMAMODE_FR
);
535 dma_mode
= MPC52xx_ATA_DMAMODE_IE
| MPC52xx_ATA_DMAMODE_WRITE
;
537 /* Setup FIFO if direction changed */
538 if (priv
->mpc52xx_ata_dma_last_write
!= 1) {
539 priv
->mpc52xx_ata_dma_last_write
= 1;
541 /* Configure FIFO with granularity to 4 */
542 out_8(®s
->fifo_control
, 4);
543 out_be16(®s
->fifo_alarm
, 128);
547 if (priv
->timings
[qc
->dev
->devno
].using_udma
)
548 dma_mode
|= MPC52xx_ATA_DMAMODE_UDMA
;
550 out_8(®s
->dma_mode
, dma_mode
);
551 priv
->waiting_for_dma
= ATA_DMA_ACTIVE
;
554 ap
->ops
->sff_exec_command(ap
, &qc
->tf
);
558 mpc52xx_bmdma_start(struct ata_queued_cmd
*qc
)
560 struct ata_port
*ap
= qc
->ap
;
561 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
563 bcom_set_task_auto_start(priv
->dmatsk
->tasknum
, priv
->dmatsk
->tasknum
);
564 bcom_enable(priv
->dmatsk
);
568 mpc52xx_bmdma_stop(struct ata_queued_cmd
*qc
)
570 struct ata_port
*ap
= qc
->ap
;
571 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
573 bcom_disable(priv
->dmatsk
);
574 bcom_ata_reset_bd(priv
->dmatsk
);
575 priv
->waiting_for_dma
= 0;
577 /* Check FIFO is OK... */
578 if (in_8(&priv
->ata_regs
->fifo_status
) & MPC52xx_ATA_FIFOSTAT_ERROR
)
579 dev_alert(ap
->dev
, "%s: FIFO error detected: 0x%02x!\n",
580 __func__
, in_8(&priv
->ata_regs
->fifo_status
));
584 mpc52xx_bmdma_status(struct ata_port
*ap
)
586 struct mpc52xx_ata_priv
*priv
= ap
->host
->private_data
;
588 /* Check FIFO is OK... */
589 if (in_8(&priv
->ata_regs
->fifo_status
) & MPC52xx_ATA_FIFOSTAT_ERROR
) {
590 dev_alert(ap
->dev
, "%s: FIFO error detected: 0x%02x!\n",
591 __func__
, in_8(&priv
->ata_regs
->fifo_status
));
592 return priv
->waiting_for_dma
| ATA_DMA_ERR
;
595 return priv
->waiting_for_dma
;
599 mpc52xx_ata_task_irq(int irq
, void *vpriv
)
601 struct mpc52xx_ata_priv
*priv
= vpriv
;
602 while (bcom_buffer_done(priv
->dmatsk
))
603 bcom_retrieve_buffer(priv
->dmatsk
, NULL
, NULL
);
605 priv
->waiting_for_dma
|= ATA_DMA_INTR
;
610 static const struct scsi_host_template mpc52xx_ata_sht
= {
611 ATA_PIO_SHT(DRV_NAME
),
614 static struct ata_port_operations mpc52xx_ata_port_ops
= {
615 .inherits
= &ata_bmdma_port_ops
,
616 .sff_dev_select
= mpc52xx_ata_dev_select
,
617 .set_piomode
= mpc52xx_ata_set_piomode
,
618 .set_dmamode
= mpc52xx_ata_set_dmamode
,
619 .bmdma_setup
= mpc52xx_bmdma_setup
,
620 .bmdma_start
= mpc52xx_bmdma_start
,
621 .bmdma_stop
= mpc52xx_bmdma_stop
,
622 .bmdma_status
= mpc52xx_bmdma_status
,
625 static int mpc52xx_ata_init_one(struct device
*dev
,
626 struct mpc52xx_ata_priv
*priv
,
627 unsigned long raw_ata_regs
,
628 int mwdma_mask
, int udma_mask
)
630 struct ata_host
*host
;
632 struct ata_ioports
*aio
;
634 host
= ata_host_alloc(dev
, 1);
639 ap
->flags
|= ATA_FLAG_SLAVE_POSS
;
640 ap
->pio_mask
= ATA_PIO4
;
641 ap
->mwdma_mask
= mwdma_mask
;
642 ap
->udma_mask
= udma_mask
;
643 ap
->ops
= &mpc52xx_ata_port_ops
;
644 host
->private_data
= priv
;
647 aio
->cmd_addr
= NULL
; /* Don't have a classic reg block */
648 aio
->altstatus_addr
= &priv
->ata_regs
->tf_control
;
649 aio
->ctl_addr
= &priv
->ata_regs
->tf_control
;
650 aio
->data_addr
= &priv
->ata_regs
->tf_data
;
651 aio
->error_addr
= &priv
->ata_regs
->tf_features
;
652 aio
->feature_addr
= &priv
->ata_regs
->tf_features
;
653 aio
->nsect_addr
= &priv
->ata_regs
->tf_sec_count
;
654 aio
->lbal_addr
= &priv
->ata_regs
->tf_sec_num
;
655 aio
->lbam_addr
= &priv
->ata_regs
->tf_cyl_low
;
656 aio
->lbah_addr
= &priv
->ata_regs
->tf_cyl_high
;
657 aio
->device_addr
= &priv
->ata_regs
->tf_dev_head
;
658 aio
->status_addr
= &priv
->ata_regs
->tf_command
;
659 aio
->command_addr
= &priv
->ata_regs
->tf_command
;
661 ata_port_desc(ap
, "ata_regs 0x%lx", raw_ata_regs
);
664 return ata_host_activate(host
, priv
->ata_irq
, ata_bmdma_interrupt
, 0,
668 /* ======================================================================== */
669 /* OF Platform driver */
670 /* ======================================================================== */
672 static int mpc52xx_ata_probe(struct platform_device
*op
)
674 unsigned int ipb_freq
;
675 struct resource res_mem
;
677 struct mpc52xx_ata __iomem
*ata_regs
;
678 struct mpc52xx_ata_priv
*priv
= NULL
;
680 int mwdma_mask
= 0, udma_mask
= 0;
683 struct bcom_task
*dmatsk
;
685 /* Get ipb frequency */
686 ipb_freq
= mpc5xxx_get_bus_frequency(&op
->dev
);
688 dev_err(&op
->dev
, "could not determine IPB bus frequency\n");
692 /* Get device base address from device tree, request the region
694 rv
= of_address_to_resource(op
->dev
.of_node
, 0, &res_mem
);
696 dev_err(&op
->dev
, "could not determine device base address\n");
700 if (!devm_request_mem_region(&op
->dev
, res_mem
.start
,
701 sizeof(*ata_regs
), DRV_NAME
)) {
702 dev_err(&op
->dev
, "error requesting register region\n");
706 ata_regs
= devm_ioremap(&op
->dev
, res_mem
.start
, sizeof(*ata_regs
));
708 dev_err(&op
->dev
, "error mapping device registers\n");
713 * By default, all DMA modes are disabled for the MPC5200. Some
714 * boards don't have the required signals routed to make DMA work.
715 * Also, the MPC5200B has a silicon bug that causes data corruption
716 * with UDMA if it is used at the same time as the LocalPlus bus.
718 * Instead of trying to guess what modes are usable, check the
719 * ATA device tree node to find out what DMA modes work on the board.
720 * UDMA/MWDMA modes can also be forced by adding "libata.force=<mode>"
721 * to the kernel boot parameters.
723 * The MPC5200 ATA controller supports MWDMA modes 0, 1 and 2 and
724 * UDMA modes 0, 1 and 2.
726 prop
= of_get_property(op
->dev
.of_node
, "mwdma-mode", &proplen
);
727 if ((prop
) && (proplen
>= 4))
728 mwdma_mask
= ATA_MWDMA2
& ((1 << (*prop
+ 1)) - 1);
729 prop
= of_get_property(op
->dev
.of_node
, "udma-mode", &proplen
);
730 if ((prop
) && (proplen
>= 4))
731 udma_mask
= ATA_UDMA2
& ((1 << (*prop
+ 1)) - 1);
733 ata_irq
= irq_of_parse_and_map(op
->dev
.of_node
, 0);
735 dev_err(&op
->dev
, "error mapping irq\n");
739 /* Prepare our private structure */
740 priv
= devm_kzalloc(&op
->dev
, sizeof(*priv
), GFP_KERNEL
);
746 priv
->ipb_period
= 1000000000 / (ipb_freq
/ 1000);
747 priv
->ata_regs
= ata_regs
;
748 priv
->ata_regs_pa
= res_mem
.start
;
749 priv
->ata_irq
= ata_irq
;
751 priv
->mpc52xx_ata_dma_last_write
= -1;
753 if (ipb_freq
/1000000 == 66) {
754 priv
->mdmaspec
= mdmaspec66
;
755 priv
->udmaspec
= udmaspec66
;
757 priv
->mdmaspec
= mdmaspec132
;
758 priv
->udmaspec
= udmaspec132
;
761 /* Allocate a BestComm task for DMA */
762 dmatsk
= bcom_ata_init(MAX_DMA_BUFFERS
, MAX_DMA_BUFFER_SIZE
);
764 dev_err(&op
->dev
, "bestcomm initialization failed\n");
769 task_irq
= bcom_get_task_irq(dmatsk
);
770 rv
= devm_request_irq(&op
->dev
, task_irq
, &mpc52xx_ata_task_irq
, 0,
773 dev_err(&op
->dev
, "error requesting DMA IRQ\n");
776 priv
->dmatsk
= dmatsk
;
779 rv
= mpc52xx_ata_hw_init(priv
);
781 dev_err(&op
->dev
, "error initializing hardware\n");
785 /* Register ourselves to libata */
786 rv
= mpc52xx_ata_init_one(&op
->dev
, priv
, res_mem
.start
,
787 mwdma_mask
, udma_mask
);
789 dev_err(&op
->dev
, "error registering with ATA layer\n");
796 irq_dispose_mapping(task_irq
);
797 bcom_ata_release(dmatsk
);
799 irq_dispose_mapping(ata_irq
);
803 static void mpc52xx_ata_remove(struct platform_device
*op
)
805 struct ata_host
*host
= platform_get_drvdata(op
);
806 struct mpc52xx_ata_priv
*priv
= host
->private_data
;
809 /* Deregister the ATA interface */
810 ata_platform_remove_one(op
);
813 task_irq
= bcom_get_task_irq(priv
->dmatsk
);
814 irq_dispose_mapping(task_irq
);
815 bcom_ata_release(priv
->dmatsk
);
816 irq_dispose_mapping(priv
->ata_irq
);
819 #ifdef CONFIG_PM_SLEEP
821 mpc52xx_ata_suspend(struct platform_device
*op
, pm_message_t state
)
823 struct ata_host
*host
= platform_get_drvdata(op
);
825 ata_host_suspend(host
, state
);
830 mpc52xx_ata_resume(struct platform_device
*op
)
832 struct ata_host
*host
= platform_get_drvdata(op
);
833 struct mpc52xx_ata_priv
*priv
= host
->private_data
;
836 rv
= mpc52xx_ata_hw_init(priv
);
838 dev_err(host
->dev
, "error initializing hardware\n");
842 ata_host_resume(host
);
848 static const struct of_device_id mpc52xx_ata_of_match
[] = {
849 { .compatible
= "fsl,mpc5200-ata", },
850 { .compatible
= "mpc5200-ata", },
855 static struct platform_driver mpc52xx_ata_of_platform_driver
= {
856 .probe
= mpc52xx_ata_probe
,
857 .remove
= mpc52xx_ata_remove
,
858 #ifdef CONFIG_PM_SLEEP
859 .suspend
= mpc52xx_ata_suspend
,
860 .resume
= mpc52xx_ata_resume
,
864 .of_match_table
= mpc52xx_ata_of_match
,
868 module_platform_driver(mpc52xx_ata_of_platform_driver
);
870 MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
871 MODULE_DESCRIPTION("Freescale MPC52xx IDE/ATA libata driver");
872 MODULE_LICENSE("GPL");
873 MODULE_DEVICE_TABLE(of
, mpc52xx_ata_of_match
);