?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace...
[drm/drm-misc.git] / drivers / hwmon / w83781d.c
blob076200ed2ec914ab34ac1760042f39b7977385de
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
4 * monitoring
5 * Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
6 * Philip Edelbrock <phil@netroedge.com>,
7 * and Mark Studebaker <mdsxyz123@yahoo.com>
8 * Copyright (c) 2007 - 2008 Jean Delvare <jdelvare@suse.de>
9 */
10
11 /*
12 * Supports following chips:
13 *
14 * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
15 * as99127f 7 3 0 3 0x31 0x12c3 yes no
16 * as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
17 * w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
18 * w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
19 * w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
20 *
21 */
22
23 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
24
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/slab.h>
28 #include <linux/jiffies.h>
29 #include <linux/i2c.h>
30 #include <linux/hwmon.h>
31 #include <linux/hwmon-vid.h>
32 #include <linux/hwmon-sysfs.h>
33 #include <linux/sysfs.h>
34 #include <linux/err.h>
35 #include <linux/mutex.h>
36
37 #ifdef CONFIG_ISA
38 #include <linux/platform_device.h>
39 #include <linux/ioport.h>
40 #include <linux/io.h>
41 #endif
42
43 #include "lm75.h"
44
45 /* Addresses to scan */
46 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
47 0x2e, 0x2f, I2C_CLIENT_END };
48
49 enum chips { w83781d, w83782d, w83783s, as99127f };
50
51 /* Insmod parameters */
52 static unsigned short force_subclients[4];
53 module_param_array(force_subclients, short, NULL, 0);
54 MODULE_PARM_DESC(force_subclients,
55 "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}");
56
57 static bool reset;
58 module_param(reset, bool, 0);
59 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
60
61 static bool init = 1;
62 module_param(init, bool, 0);
63 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
64
65 /* Constants specified below */
66
67 /* Length of ISA address segment */
68 #define W83781D_EXTENT 8
69
70 /* Where are the ISA address/data registers relative to the base address */
71 #define W83781D_ADDR_REG_OFFSET 5
72 #define W83781D_DATA_REG_OFFSET 6
73
74 /* The device registers */
75 /* in nr from 0 to 8 */
76 #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
77 (0x554 + (((nr) - 7) * 2)))
78 #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
79 (0x555 + (((nr) - 7) * 2)))
80 #define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
81 (0x550 + (nr) - 7))
82
83 /* fan nr from 0 to 2 */
84 #define W83781D_REG_FAN_MIN(nr) (0x3b + (nr))
85 #define W83781D_REG_FAN(nr) (0x28 + (nr))
86
87 #define W83781D_REG_BANK 0x4E
88 #define W83781D_REG_TEMP2_CONFIG 0x152
89 #define W83781D_REG_TEMP3_CONFIG 0x252
90 /* temp nr from 1 to 3 */
91 #define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
92 ((nr == 2) ? (0x0150) : \
93 (0x27)))
94 #define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
95 ((nr == 2) ? (0x153) : \
96 (0x3A)))
97 #define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
98 ((nr == 2) ? (0x155) : \
99 (0x39)))
100
101 #define W83781D_REG_CONFIG 0x40
102
103 /* Interrupt status (W83781D, AS99127F) */
104 #define W83781D_REG_ALARM1 0x41
105 #define W83781D_REG_ALARM2 0x42
106
107 /* Real-time status (W83782D, W83783S) */
108 #define W83782D_REG_ALARM1 0x459
109 #define W83782D_REG_ALARM2 0x45A
110 #define W83782D_REG_ALARM3 0x45B
111
112 #define W83781D_REG_BEEP_CONFIG 0x4D
113 #define W83781D_REG_BEEP_INTS1 0x56
114 #define W83781D_REG_BEEP_INTS2 0x57
115 #define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */
116
117 #define W83781D_REG_VID_FANDIV 0x47
118
119 #define W83781D_REG_CHIPID 0x49
120 #define W83781D_REG_WCHIPID 0x58
121 #define W83781D_REG_CHIPMAN 0x4F
122 #define W83781D_REG_PIN 0x4B
123
124 /* 782D/783S only */
125 #define W83781D_REG_VBAT 0x5D
126
127 /* PWM 782D (1-4) and 783S (1-2) only */
128 static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F };
129 #define W83781D_REG_PWMCLK12 0x5C
130 #define W83781D_REG_PWMCLK34 0x45C
131
132 #define W83781D_REG_I2C_ADDR 0x48
133 #define W83781D_REG_I2C_SUBADDR 0x4A
134
135 /*
136 * The following are undocumented in the data sheets however we
137 * received the information in an email from Winbond tech support
138 */
139 /* Sensor selection - not on 781d */
140 #define W83781D_REG_SCFG1 0x5D
141 static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
142
143 #define W83781D_REG_SCFG2 0x59
144 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
145
146 #define W83781D_DEFAULT_BETA 3435
147
148 /* Conversions */
149 #define IN_TO_REG(val) clamp_val(((val) + 8) / 16, 0, 255)
150 #define IN_FROM_REG(val) ((val) * 16)
151
152 static inline u8
153 FAN_TO_REG(long rpm, int div)
154 {
155 if (rpm == 0)
156 return 255;
157 rpm = clamp_val(rpm, 1, 1000000);
158 return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
159 }
160
161 static inline long
162 FAN_FROM_REG(u8 val, int div)
163 {
164 if (val == 0)
165 return -1;
166 if (val == 255)
167 return 0;
168 return 1350000 / (val * div);
169 }
170
171 #define TEMP_TO_REG(val) clamp_val((val) / 1000, -127, 128)
172 #define TEMP_FROM_REG(val) ((val) * 1000)
173
174 #define BEEP_MASK_FROM_REG(val, type) ((type) == as99127f ? \
175 (~(val)) & 0x7fff : (val) & 0xff7fff)
176 #define BEEP_MASK_TO_REG(val, type) ((type) == as99127f ? \
177 (~(val)) & 0x7fff : (val) & 0xff7fff)
178
179 #define DIV_FROM_REG(val) (1 << (val))
180
181 static inline u8
182 DIV_TO_REG(long val, enum chips type)
183 {
184 int i;
185 val = clamp_val(val, 1,
186 ((type == w83781d || type == as99127f) ? 8 : 128)) >> 1;
187 for (i = 0; i < 7; i++) {
188 if (val == 0)
189 break;
190 val >>= 1;
191 }
192 return i;
193 }
194
195 struct w83781d_data {
196 struct i2c_client *client;
197 struct device *hwmon_dev;
198 struct mutex lock;
199 enum chips type;
200
201 /* For ISA device only */
202 const char *name;
203 int isa_addr;
204
205 struct mutex update_lock;
206 bool valid; /* true if following fields are valid */
207 unsigned long last_updated; /* In jiffies */
208
209 struct i2c_client *lm75[2]; /* for secondary I2C addresses */
210 /* array of 2 pointers to subclients */
211
212 u8 in[9]; /* Register value - 8 & 9 for 782D only */
213 u8 in_max[9]; /* Register value - 8 & 9 for 782D only */
214 u8 in_min[9]; /* Register value - 8 & 9 for 782D only */
215 u8 fan[3]; /* Register value */
216 u8 fan_min[3]; /* Register value */
217 s8 temp; /* Register value */
218 s8 temp_max; /* Register value */
219 s8 temp_max_hyst; /* Register value */
220 u16 temp_add[2]; /* Register value */
221 u16 temp_max_add[2]; /* Register value */
222 u16 temp_max_hyst_add[2]; /* Register value */
223 u8 fan_div[3]; /* Register encoding, shifted right */
224 u8 vid; /* Register encoding, combined */
225 u32 alarms; /* Register encoding, combined */
226 u32 beep_mask; /* Register encoding, combined */
227 u8 pwm[4]; /* Register value */
228 u8 pwm2_enable; /* Boolean */
229 u16 sens[3]; /*
230 * 782D/783S only.
231 * 1 = pentium diode; 2 = 3904 diode;
232 * 4 = thermistor
233 */
234 u8 vrm;
235 };
236
237 static struct w83781d_data *w83781d_data_if_isa(void);
238 static int w83781d_alias_detect(struct i2c_client *client, u8 chipid);
239
240 static int w83781d_read_value(struct w83781d_data *data, u16 reg);
241 static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value);
242 static struct w83781d_data *w83781d_update_device(struct device *dev);
243 static void w83781d_init_device(struct device *dev);
244
245 /* following are the sysfs callback functions */
246 #define show_in_reg(reg) \
247 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
248 char *buf) \
249 { \
250 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
251 struct w83781d_data *data = w83781d_update_device(dev); \
252 return sprintf(buf, "%ld\n", \
253 (long)IN_FROM_REG(data->reg[attr->index])); \
254 }
255 show_in_reg(in);
256 show_in_reg(in_min);
257 show_in_reg(in_max);
258
259 #define store_in_reg(REG, reg) \
260 static ssize_t store_in_##reg(struct device *dev, struct device_attribute \
261 *da, const char *buf, size_t count) \
262 { \
263 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
264 struct w83781d_data *data = dev_get_drvdata(dev); \
265 int nr = attr->index; \
266 unsigned long val; \
267 int err = kstrtoul(buf, 10, &val); \
268 if (err) \
269 return err; \
270 mutex_lock(&data->update_lock); \
271 data->in_##reg[nr] = IN_TO_REG(val); \
272 w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \
273 data->in_##reg[nr]); \
274 \
275 mutex_unlock(&data->update_lock); \
276 return count; \
277 }
278 store_in_reg(MIN, min);
279 store_in_reg(MAX, max);
280
281 #define sysfs_in_offsets(offset) \
282 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
283 show_in, NULL, offset); \
284 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
285 show_in_min, store_in_min, offset); \
286 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
287 show_in_max, store_in_max, offset)
288
289 sysfs_in_offsets(0);
290 sysfs_in_offsets(1);
291 sysfs_in_offsets(2);
292 sysfs_in_offsets(3);
293 sysfs_in_offsets(4);
294 sysfs_in_offsets(5);
295 sysfs_in_offsets(6);
296 sysfs_in_offsets(7);
297 sysfs_in_offsets(8);
298
299 #define show_fan_reg(reg) \
300 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
301 char *buf) \
302 { \
303 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
304 struct w83781d_data *data = w83781d_update_device(dev); \
305 return sprintf(buf, "%ld\n", \
306 FAN_FROM_REG(data->reg[attr->index], \
307 DIV_FROM_REG(data->fan_div[attr->index]))); \
308 }
309 show_fan_reg(fan);
310 show_fan_reg(fan_min);
311
312 static ssize_t
313 store_fan_min(struct device *dev, struct device_attribute *da,
314 const char *buf, size_t count)
315 {
316 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
317 struct w83781d_data *data = dev_get_drvdata(dev);
318 int nr = attr->index;
319 unsigned long val;
320 int err;
321
322 err = kstrtoul(buf, 10, &val);
323 if (err)
324 return err;
325
326 mutex_lock(&data->update_lock);
327 data->fan_min[nr] =
328 FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
329 w83781d_write_value(data, W83781D_REG_FAN_MIN(nr),
330 data->fan_min[nr]);
331
332 mutex_unlock(&data->update_lock);
333 return count;
334 }
335
336 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
337 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
338 show_fan_min, store_fan_min, 0);
339 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
340 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
341 show_fan_min, store_fan_min, 1);
342 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
343 static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
344 show_fan_min, store_fan_min, 2);
345
346 #define show_temp_reg(reg) \
347 static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \
348 char *buf) \
349 { \
350 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
351 struct w83781d_data *data = w83781d_update_device(dev); \
352 int nr = attr->index; \
353 if (nr >= 2) { /* TEMP2 and TEMP3 */ \
354 return sprintf(buf, "%d\n", \
355 LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
356 } else { /* TEMP1 */ \
357 return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \
358 } \
359 }
360 show_temp_reg(temp);
361 show_temp_reg(temp_max);
362 show_temp_reg(temp_max_hyst);
363
364 #define store_temp_reg(REG, reg) \
365 static ssize_t store_temp_##reg(struct device *dev, \
366 struct device_attribute *da, const char *buf, size_t count) \
367 { \
368 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
369 struct w83781d_data *data = dev_get_drvdata(dev); \
370 int nr = attr->index; \
371 long val; \
372 int err = kstrtol(buf, 10, &val); \
373 if (err) \
374 return err; \
375 mutex_lock(&data->update_lock); \
376 \
377 if (nr >= 2) { /* TEMP2 and TEMP3 */ \
378 data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
379 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
380 data->temp_##reg##_add[nr-2]); \
381 } else { /* TEMP1 */ \
382 data->temp_##reg = TEMP_TO_REG(val); \
383 w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \
384 data->temp_##reg); \
385 } \
386 \
387 mutex_unlock(&data->update_lock); \
388 return count; \
389 }
390 store_temp_reg(OVER, max);
391 store_temp_reg(HYST, max_hyst);
392
393 #define sysfs_temp_offsets(offset) \
394 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
395 show_temp, NULL, offset); \
396 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
397 show_temp_max, store_temp_max, offset); \
398 static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \
399 show_temp_max_hyst, store_temp_max_hyst, offset);
400
401 sysfs_temp_offsets(1);
402 sysfs_temp_offsets(2);
403 sysfs_temp_offsets(3);
404
405 static ssize_t
406 cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
407 {
408 struct w83781d_data *data = w83781d_update_device(dev);
409 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
410 }
411
412 static DEVICE_ATTR_RO(cpu0_vid);
413
414 static ssize_t
415 vrm_show(struct device *dev, struct device_attribute *attr, char *buf)
416 {
417 struct w83781d_data *data = dev_get_drvdata(dev);
418 return sprintf(buf, "%ld\n", (long) data->vrm);
419 }
420
421 static ssize_t
422 vrm_store(struct device *dev, struct device_attribute *attr, const char *buf,
423 size_t count)
424 {
425 struct w83781d_data *data = dev_get_drvdata(dev);
426 unsigned long val;
427 int err;
428
429 err = kstrtoul(buf, 10, &val);
430 if (err)
431 return err;
432 data->vrm = clamp_val(val, 0, 255);
433
434 return count;
435 }
436
437 static DEVICE_ATTR_RW(vrm);
438
439 static ssize_t
440 alarms_show(struct device *dev, struct device_attribute *attr, char *buf)
441 {
442 struct w83781d_data *data = w83781d_update_device(dev);
443 return sprintf(buf, "%u\n", data->alarms);
444 }
445
446 static DEVICE_ATTR_RO(alarms);
447
448 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
449 char *buf)
450 {
451 struct w83781d_data *data = w83781d_update_device(dev);
452 int bitnr = to_sensor_dev_attr(attr)->index;
453 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
454 }
455
456 /* The W83781D has a single alarm bit for temp2 and temp3 */
457 static ssize_t show_temp3_alarm(struct device *dev,
458 struct device_attribute *attr, char *buf)
459 {
460 struct w83781d_data *data = w83781d_update_device(dev);
461 int bitnr = (data->type == w83781d) ? 5 : 13;
462 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
463 }
464
465 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
466 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
467 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
468 static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
469 static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
470 static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
471 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10);
472 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16);
473 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17);
474 static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
475 static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
476 static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11);
477 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
478 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5);
479 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0);
480
481 static ssize_t beep_mask_show(struct device *dev,
482 struct device_attribute *attr, char *buf)
483 {
484 struct w83781d_data *data = w83781d_update_device(dev);
485 return sprintf(buf, "%ld\n",
486 (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
487 }
488
489 static ssize_t
490 beep_mask_store(struct device *dev, struct device_attribute *attr,
491 const char *buf, size_t count)
492 {
493 struct w83781d_data *data = dev_get_drvdata(dev);
494 unsigned long val;
495 int err;
496
497 err = kstrtoul(buf, 10, &val);
498 if (err)
499 return err;
500
501 mutex_lock(&data->update_lock);
502 data->beep_mask &= 0x8000; /* preserve beep enable */
503 data->beep_mask |= BEEP_MASK_TO_REG(val, data->type);
504 w83781d_write_value(data, W83781D_REG_BEEP_INTS1,
505 data->beep_mask & 0xff);
506 w83781d_write_value(data, W83781D_REG_BEEP_INTS2,
507 (data->beep_mask >> 8) & 0xff);
508 if (data->type != w83781d && data->type != as99127f) {
509 w83781d_write_value(data, W83781D_REG_BEEP_INTS3,
510 ((data->beep_mask) >> 16) & 0xff);
511 }
512 mutex_unlock(&data->update_lock);
513
514 return count;
515 }
516
517 static DEVICE_ATTR_RW(beep_mask);
518
519 static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
520 char *buf)
521 {
522 struct w83781d_data *data = w83781d_update_device(dev);
523 int bitnr = to_sensor_dev_attr(attr)->index;
524 return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
525 }
526
527 static ssize_t
528 store_beep(struct device *dev, struct device_attribute *attr,
529 const char *buf, size_t count)
530 {
531 struct w83781d_data *data = dev_get_drvdata(dev);
532 int bitnr = to_sensor_dev_attr(attr)->index;
533 u8 reg;
534 unsigned long bit;
535 int err;
536
537 err = kstrtoul(buf, 10, &bit);
538 if (err)
539 return err;
540
541 if (bit & ~1)
542 return -EINVAL;
543
544 mutex_lock(&data->update_lock);
545 if (bit)
546 data->beep_mask |= (1 << bitnr);
547 else
548 data->beep_mask &= ~(1 << bitnr);
549
550 if (bitnr < 8) {
551 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
552 if (bit)
553 reg |= (1 << bitnr);
554 else
555 reg &= ~(1 << bitnr);
556 w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg);
557 } else if (bitnr < 16) {
558 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
559 if (bit)
560 reg |= (1 << (bitnr - 8));
561 else
562 reg &= ~(1 << (bitnr - 8));
563 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg);
564 } else {
565 reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3);
566 if (bit)
567 reg |= (1 << (bitnr - 16));
568 else
569 reg &= ~(1 << (bitnr - 16));
570 w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg);
571 }
572 mutex_unlock(&data->update_lock);
573
574 return count;
575 }
576
577 /* The W83781D has a single beep bit for temp2 and temp3 */
578 static ssize_t show_temp3_beep(struct device *dev,
579 struct device_attribute *attr, char *buf)
580 {
581 struct w83781d_data *data = w83781d_update_device(dev);
582 int bitnr = (data->type == w83781d) ? 5 : 13;
583 return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
584 }
585
586 static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR,
587 show_beep, store_beep, 0);
588 static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR,
589 show_beep, store_beep, 1);
590 static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR,
591 show_beep, store_beep, 2);
592 static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR,
593 show_beep, store_beep, 3);
594 static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR,
595 show_beep, store_beep, 8);
596 static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR,
597 show_beep, store_beep, 9);
598 static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR,
599 show_beep, store_beep, 10);
600 static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR,
601 show_beep, store_beep, 16);
602 static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR,
603 show_beep, store_beep, 17);
604 static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR,
605 show_beep, store_beep, 6);
606 static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR,
607 show_beep, store_beep, 7);
608 static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR,
609 show_beep, store_beep, 11);
610 static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
611 show_beep, store_beep, 4);
612 static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR,
613 show_beep, store_beep, 5);
614 static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO,
615 show_temp3_beep, store_beep, 13);
616 static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR,
617 show_beep, store_beep, 15);
618
619 static ssize_t
620 show_fan_div(struct device *dev, struct device_attribute *da, char *buf)
621 {
622 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
623 struct w83781d_data *data = w83781d_update_device(dev);
624 return sprintf(buf, "%ld\n",
625 (long) DIV_FROM_REG(data->fan_div[attr->index]));
626 }
627
628 /*
629 * Note: we save and restore the fan minimum here, because its value is
630 * determined in part by the fan divisor. This follows the principle of
631 * least surprise; the user doesn't expect the fan minimum to change just
632 * because the divisor changed.
633 */
634 static ssize_t
635 store_fan_div(struct device *dev, struct device_attribute *da,
636 const char *buf, size_t count)
637 {
638 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
639 struct w83781d_data *data = dev_get_drvdata(dev);
640 unsigned long min;
641 int nr = attr->index;
642 u8 reg;
643 unsigned long val;
644 int err;
645
646 err = kstrtoul(buf, 10, &val);
647 if (err)
648 return err;
649
650 mutex_lock(&data->update_lock);
651
652 /* Save fan_min */
653 min = FAN_FROM_REG(data->fan_min[nr],
654 DIV_FROM_REG(data->fan_div[nr]));
655
656 data->fan_div[nr] = DIV_TO_REG(val, data->type);
657
658 reg = (w83781d_read_value(data, nr == 2 ?
659 W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
660 & (nr == 0 ? 0xcf : 0x3f))
661 | ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6));
662 w83781d_write_value(data, nr == 2 ?
663 W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
664
665 /* w83781d and as99127f don't have extended divisor bits */
666 if (data->type != w83781d && data->type != as99127f) {
667 reg = (w83781d_read_value(data, W83781D_REG_VBAT)
668 & ~(1 << (5 + nr)))
669 | ((data->fan_div[nr] & 0x04) << (3 + nr));
670 w83781d_write_value(data, W83781D_REG_VBAT, reg);
671 }
672
673 /* Restore fan_min */
674 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
675 w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]);
676
677 mutex_unlock(&data->update_lock);
678 return count;
679 }
680
681 static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
682 show_fan_div, store_fan_div, 0);
683 static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
684 show_fan_div, store_fan_div, 1);
685 static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR,
686 show_fan_div, store_fan_div, 2);
687
688 static ssize_t
689 show_pwm(struct device *dev, struct device_attribute *da, char *buf)
690 {
691 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
692 struct w83781d_data *data = w83781d_update_device(dev);
693 return sprintf(buf, "%d\n", (int)data->pwm[attr->index]);
694 }
695
696 static ssize_t
697 pwm2_enable_show(struct device *dev, struct device_attribute *da, char *buf)
698 {
699 struct w83781d_data *data = w83781d_update_device(dev);
700 return sprintf(buf, "%d\n", (int)data->pwm2_enable);
701 }
702
703 static ssize_t
704 store_pwm(struct device *dev, struct device_attribute *da, const char *buf,
705 size_t count)
706 {
707 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
708 struct w83781d_data *data = dev_get_drvdata(dev);
709 int nr = attr->index;
710 unsigned long val;
711 int err;
712
713 err = kstrtoul(buf, 10, &val);
714 if (err)
715 return err;
716
717 mutex_lock(&data->update_lock);
718 data->pwm[nr] = clamp_val(val, 0, 255);
719 w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]);
720 mutex_unlock(&data->update_lock);
721 return count;
722 }
723
724 static ssize_t
725 pwm2_enable_store(struct device *dev, struct device_attribute *da,
726 const char *buf, size_t count)
727 {
728 struct w83781d_data *data = dev_get_drvdata(dev);
729 unsigned long val;
730 u32 reg;
731 int err;
732
733 err = kstrtoul(buf, 10, &val);
734 if (err)
735 return err;
736
737 mutex_lock(&data->update_lock);
738
739 switch (val) {
740 case 0:
741 case 1:
742 reg = w83781d_read_value(data, W83781D_REG_PWMCLK12);
743 w83781d_write_value(data, W83781D_REG_PWMCLK12,
744 (reg & 0xf7) | (val << 3));
745
746 reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
747 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG,
748 (reg & 0xef) | (!val << 4));
749
750 data->pwm2_enable = val;
751 break;
752
753 default:
754 mutex_unlock(&data->update_lock);
755 return -EINVAL;
756 }
757
758 mutex_unlock(&data->update_lock);
759 return count;
760 }
761
762 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0);
763 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1);
764 static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2);
765 static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3);
766 /* only PWM2 can be enabled/disabled */
767 static DEVICE_ATTR_RW(pwm2_enable);
768
769 static ssize_t
770 show_sensor(struct device *dev, struct device_attribute *da, char *buf)
771 {
772 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
773 struct w83781d_data *data = w83781d_update_device(dev);
774 return sprintf(buf, "%d\n", (int)data->sens[attr->index]);
775 }
776
777 static ssize_t
778 store_sensor(struct device *dev, struct device_attribute *da,
779 const char *buf, size_t count)
780 {
781 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
782 struct w83781d_data *data = dev_get_drvdata(dev);
783 int nr = attr->index;
784 unsigned long val;
785 u32 tmp;
786 int err;
787
788 err = kstrtoul(buf, 10, &val);
789 if (err)
790 return err;
791
792 mutex_lock(&data->update_lock);
793
794 switch (val) {
795 case 1: /* PII/Celeron diode */
796 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
797 w83781d_write_value(data, W83781D_REG_SCFG1,
798 tmp | BIT_SCFG1[nr]);
799 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
800 w83781d_write_value(data, W83781D_REG_SCFG2,
801 tmp | BIT_SCFG2[nr]);
802 data->sens[nr] = val;
803 break;
804 case 2: /* 3904 */
805 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
806 w83781d_write_value(data, W83781D_REG_SCFG1,
807 tmp | BIT_SCFG1[nr]);
808 tmp = w83781d_read_value(data, W83781D_REG_SCFG2);
809 w83781d_write_value(data, W83781D_REG_SCFG2,
810 tmp & ~BIT_SCFG2[nr]);
811 data->sens[nr] = val;
812 break;
813 case W83781D_DEFAULT_BETA:
814 dev_warn(dev,
815 "Sensor type %d is deprecated, please use 4 instead\n",
816 W83781D_DEFAULT_BETA);
817 fallthrough;
818 case 4: /* thermistor */
819 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
820 w83781d_write_value(data, W83781D_REG_SCFG1,
821 tmp & ~BIT_SCFG1[nr]);
822 data->sens[nr] = val;
823 break;
824 default:
825 dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n",
826 (long) val);
827 break;
828 }
829
830 mutex_unlock(&data->update_lock);
831 return count;
832 }
833
834 static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
835 show_sensor, store_sensor, 0);
836 static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
837 show_sensor, store_sensor, 1);
838 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
839 show_sensor, store_sensor, 2);
840
841 /*
842 * Assumes that adapter is of I2C, not ISA variety.
843 * OTHERWISE DON'T CALL THIS
844 */
845 static int
846 w83781d_detect_subclients(struct i2c_client *new_client)
847 {
848 int i, val1 = 0, id;
849 int err;
850 int address = new_client->addr;
851 unsigned short sc_addr[2];
852 struct i2c_adapter *adapter = new_client->adapter;
853 struct w83781d_data *data = i2c_get_clientdata(new_client);
854 enum chips kind = data->type;
855 int num_sc = 1;
856
857 id = i2c_adapter_id(adapter);
858
859 if (force_subclients[0] == id && force_subclients[1] == address) {
860 for (i = 2; i <= 3; i++) {
861 if (force_subclients[i] < 0x48 ||
862 force_subclients[i] > 0x4f) {
863 dev_err(&new_client->dev,
864 "Invalid subclient address %d; must be 0x48-0x4f\n",
865 force_subclients[i]);
866 err = -EINVAL;
867 goto ERROR_SC_1;
868 }
869 }
870 w83781d_write_value(data, W83781D_REG_I2C_SUBADDR,
871 (force_subclients[2] & 0x07) |
872 ((force_subclients[3] & 0x07) << 4));
873 sc_addr[0] = force_subclients[2];
874 } else {
875 val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR);
876 sc_addr[0] = 0x48 + (val1 & 0x07);
877 }
878
879 if (kind != w83783s) {
880 num_sc = 2;
881 if (force_subclients[0] == id &&
882 force_subclients[1] == address) {
883 sc_addr[1] = force_subclients[3];
884 } else {
885 sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07);
886 }
887 if (sc_addr[0] == sc_addr[1]) {
888 dev_err(&new_client->dev,
889 "Duplicate addresses 0x%x for subclients.\n",
890 sc_addr[0]);
891 err = -EBUSY;
892 goto ERROR_SC_2;
893 }
894 }
895
896 for (i = 0; i < num_sc; i++) {
897 data->lm75[i] = i2c_new_dummy_device(adapter, sc_addr[i]);
898 if (IS_ERR(data->lm75[i])) {
899 dev_err(&new_client->dev,
900 "Subclient %d registration at address 0x%x failed.\n",
901 i, sc_addr[i]);
902 err = PTR_ERR(data->lm75[i]);
903 if (i == 1)
904 goto ERROR_SC_3;
905 goto ERROR_SC_2;
906 }
907 }
908
909 return 0;
910
911 /* Undo inits in case of errors */
912 ERROR_SC_3:
913 i2c_unregister_device(data->lm75[0]);
914 ERROR_SC_2:
915 ERROR_SC_1:
916 return err;
917 }
918
919 #define IN_UNIT_ATTRS(X) \
920 &sensor_dev_attr_in##X##_input.dev_attr.attr, \
921 &sensor_dev_attr_in##X##_min.dev_attr.attr, \
922 &sensor_dev_attr_in##X##_max.dev_attr.attr, \
923 &sensor_dev_attr_in##X##_alarm.dev_attr.attr, \
924 &sensor_dev_attr_in##X##_beep.dev_attr.attr
925
926 #define FAN_UNIT_ATTRS(X) \
927 &sensor_dev_attr_fan##X##_input.dev_attr.attr, \
928 &sensor_dev_attr_fan##X##_min.dev_attr.attr, \
929 &sensor_dev_attr_fan##X##_div.dev_attr.attr, \
930 &sensor_dev_attr_fan##X##_alarm.dev_attr.attr, \
931 &sensor_dev_attr_fan##X##_beep.dev_attr.attr
932
933 #define TEMP_UNIT_ATTRS(X) \
934 &sensor_dev_attr_temp##X##_input.dev_attr.attr, \
935 &sensor_dev_attr_temp##X##_max.dev_attr.attr, \
936 &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr, \
937 &sensor_dev_attr_temp##X##_alarm.dev_attr.attr, \
938 &sensor_dev_attr_temp##X##_beep.dev_attr.attr
939
940 static struct attribute *w83781d_attributes[] = {
941 IN_UNIT_ATTRS(0),
942 IN_UNIT_ATTRS(2),
943 IN_UNIT_ATTRS(3),
944 IN_UNIT_ATTRS(4),
945 IN_UNIT_ATTRS(5),
946 IN_UNIT_ATTRS(6),
947 FAN_UNIT_ATTRS(1),
948 FAN_UNIT_ATTRS(2),
949 FAN_UNIT_ATTRS(3),
950 TEMP_UNIT_ATTRS(1),
951 TEMP_UNIT_ATTRS(2),
952 &dev_attr_cpu0_vid.attr,
953 &dev_attr_vrm.attr,
954 &dev_attr_alarms.attr,
955 &dev_attr_beep_mask.attr,
956 &sensor_dev_attr_beep_enable.dev_attr.attr,
957 NULL
958 };
959 static const struct attribute_group w83781d_group = {
960 .attrs = w83781d_attributes,
961 };
962
963 static struct attribute *w83781d_attributes_in1[] = {
964 IN_UNIT_ATTRS(1),
965 NULL
966 };
967 static const struct attribute_group w83781d_group_in1 = {
968 .attrs = w83781d_attributes_in1,
969 };
970
971 static struct attribute *w83781d_attributes_in78[] = {
972 IN_UNIT_ATTRS(7),
973 IN_UNIT_ATTRS(8),
974 NULL
975 };
976 static const struct attribute_group w83781d_group_in78 = {
977 .attrs = w83781d_attributes_in78,
978 };
979
980 static struct attribute *w83781d_attributes_temp3[] = {
981 TEMP_UNIT_ATTRS(3),
982 NULL
983 };
984 static const struct attribute_group w83781d_group_temp3 = {
985 .attrs = w83781d_attributes_temp3,
986 };
987
988 static struct attribute *w83781d_attributes_pwm12[] = {
989 &sensor_dev_attr_pwm1.dev_attr.attr,
990 &sensor_dev_attr_pwm2.dev_attr.attr,
991 &dev_attr_pwm2_enable.attr,
992 NULL
993 };
994 static const struct attribute_group w83781d_group_pwm12 = {
995 .attrs = w83781d_attributes_pwm12,
996 };
997
998 static struct attribute *w83781d_attributes_pwm34[] = {
999 &sensor_dev_attr_pwm3.dev_attr.attr,
1000 &sensor_dev_attr_pwm4.dev_attr.attr,
1001 NULL
1002 };
1003 static const struct attribute_group w83781d_group_pwm34 = {
1004 .attrs = w83781d_attributes_pwm34,
1005 };
1006
1007 static struct attribute *w83781d_attributes_other[] = {
1008 &sensor_dev_attr_temp1_type.dev_attr.attr,
1009 &sensor_dev_attr_temp2_type.dev_attr.attr,
1010 &sensor_dev_attr_temp3_type.dev_attr.attr,
1011 NULL
1012 };
1013 static const struct attribute_group w83781d_group_other = {
1014 .attrs = w83781d_attributes_other,
1015 };
1016
1017 /* No clean up is done on error, it's up to the caller */
1018 static int
1019 w83781d_create_files(struct device *dev, int kind, int is_isa)
1020 {
1021 int err;
1022
1023 err = sysfs_create_group(&dev->kobj, &w83781d_group);
1024 if (err)
1025 return err;
1026
1027 if (kind != w83783s) {
1028 err = sysfs_create_group(&dev->kobj, &w83781d_group_in1);
1029 if (err)
1030 return err;
1031 }
1032 if (kind != as99127f && kind != w83781d && kind != w83783s) {
1033 err = sysfs_create_group(&dev->kobj, &w83781d_group_in78);
1034 if (err)
1035 return err;
1036 }
1037 if (kind != w83783s) {
1038 err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3);
1039 if (err)
1040 return err;
1041
1042 if (kind != w83781d) {
1043 err = sysfs_chmod_file(&dev->kobj,
1044 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
1045 S_IRUGO | S_IWUSR);
1046 if (err)
1047 return err;
1048 }
1049 }
1050
1051 if (kind != w83781d && kind != as99127f) {
1052 err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12);
1053 if (err)
1054 return err;
1055 }
1056 if (kind == w83782d && !is_isa) {
1057 err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34);
1058 if (err)
1059 return err;
1060 }
1061
1062 if (kind != as99127f && kind != w83781d) {
1063 err = device_create_file(dev,
1064 &sensor_dev_attr_temp1_type.dev_attr);
1065 if (err)
1066 return err;
1067 err = device_create_file(dev,
1068 &sensor_dev_attr_temp2_type.dev_attr);
1069 if (err)
1070 return err;
1071 if (kind != w83783s) {
1072 err = device_create_file(dev,
1073 &sensor_dev_attr_temp3_type.dev_attr);
1074 if (err)
1075 return err;
1076 }
1077 }
1078
1079 return 0;
1080 }
1081
1082 /* Return 0 if detection is successful, -ENODEV otherwise */
1083 static int
1084 w83781d_detect(struct i2c_client *client, struct i2c_board_info *info)
1085 {
1086 int val1, val2;
1087 struct w83781d_data *isa = w83781d_data_if_isa();
1088 struct i2c_adapter *adapter = client->adapter;
1089 int address = client->addr;
1090 const char *client_name;
1091 enum vendor { winbond, asus } vendid;
1092
1093 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1094 return -ENODEV;
1095
1096 /*
1097 * We block updates of the ISA device to minimize the risk of
1098 * concurrent access to the same W83781D chip through different
1099 * interfaces.
1100 */
1101 if (isa)
1102 mutex_lock(&isa->update_lock);
1103
1104 if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
1105 dev_dbg(&adapter->dev,
1106 "Detection of w83781d chip failed at step 3\n");
1107 goto err_nodev;
1108 }
1109
1110 val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
1111 val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1112 /* Check for Winbond or Asus ID if in bank 0 */
1113 if (!(val1 & 0x07) &&
1114 ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
1115 ((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
1116 dev_dbg(&adapter->dev,
1117 "Detection of w83781d chip failed at step 4\n");
1118 goto err_nodev;
1119 }
1120 /*
1121 * If Winbond SMBus, check address at 0x48.
1122 * Asus doesn't support, except for as99127f rev.2
1123 */
1124 if ((!(val1 & 0x80) && val2 == 0xa3) ||
1125 ((val1 & 0x80) && val2 == 0x5c)) {
1126 if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
1127 != address) {
1128 dev_dbg(&adapter->dev,
1129 "Detection of w83781d chip failed at step 5\n");
1130 goto err_nodev;
1131 }
1132 }
1133
1134 /* Put it now into bank 0 and Vendor ID High Byte */
1135 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1136 (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
1137 & 0x78) | 0x80);
1138
1139 /* Get the vendor ID */
1140 val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
1141 if (val2 == 0x5c)
1142 vendid = winbond;
1143 else if (val2 == 0x12)
1144 vendid = asus;
1145 else {
1146 dev_dbg(&adapter->dev,
1147 "w83781d chip vendor is neither Winbond nor Asus\n");
1148 goto err_nodev;
1149 }
1150
1151 /* Determine the chip type. */
1152 val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
1153 if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
1154 client_name = "w83781d";
1155 else if (val1 == 0x30 && vendid == winbond)
1156 client_name = "w83782d";
1157 else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
1158 client_name = "w83783s";
1159 else if (val1 == 0x31)
1160 client_name = "as99127f";
1161 else
1162 goto err_nodev;
1163
1164 if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
1165 dev_dbg(&adapter->dev,
1166 "Device at 0x%02x appears to be the same as ISA device\n",
1167 address);
1168 goto err_nodev;
1169 }
1170
1171 if (isa)
1172 mutex_unlock(&isa->update_lock);
1173
1174 strscpy(info->type, client_name, I2C_NAME_SIZE);
1175
1176 return 0;
1177
1178 err_nodev:
1179 if (isa)
1180 mutex_unlock(&isa->update_lock);
1181 return -ENODEV;
1182 }
1183
1184 static void w83781d_remove_files(struct device *dev)
1185 {
1186 sysfs_remove_group(&dev->kobj, &w83781d_group);
1187 sysfs_remove_group(&dev->kobj, &w83781d_group_in1);
1188 sysfs_remove_group(&dev->kobj, &w83781d_group_in78);
1189 sysfs_remove_group(&dev->kobj, &w83781d_group_temp3);
1190 sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12);
1191 sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34);
1192 sysfs_remove_group(&dev->kobj, &w83781d_group_other);
1193 }
1194
1195 static int w83781d_probe(struct i2c_client *client)
1196 {
1197 struct device *dev = &client->dev;
1198 struct w83781d_data *data;
1199 int err;
1200
1201 data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL);
1202 if (!data)
1203 return -ENOMEM;
1204
1205 i2c_set_clientdata(client, data);
1206 mutex_init(&data->lock);
1207 mutex_init(&data->update_lock);
1208
1209 data->type = (uintptr_t)i2c_get_match_data(client);
1210 data->client = client;
1211
1212 /* attach secondary i2c lm75-like clients */
1213 err = w83781d_detect_subclients(client);
1214 if (err)
1215 return err;
1216
1217 /* Initialize the chip */
1218 w83781d_init_device(dev);
1219
1220 /* Register sysfs hooks */
1221 err = w83781d_create_files(dev, data->type, 0);
1222 if (err)
1223 goto exit_remove_files;
1224
1225 data->hwmon_dev = hwmon_device_register(dev);
1226 if (IS_ERR(data->hwmon_dev)) {
1227 err = PTR_ERR(data->hwmon_dev);
1228 goto exit_remove_files;
1229 }
1230
1231 return 0;
1232
1233 exit_remove_files:
1234 w83781d_remove_files(dev);
1235 i2c_unregister_device(data->lm75[0]);
1236 i2c_unregister_device(data->lm75[1]);
1237 return err;
1238 }
1239
1240 static void
1241 w83781d_remove(struct i2c_client *client)
1242 {
1243 struct w83781d_data *data = i2c_get_clientdata(client);
1244 struct device *dev = &client->dev;
1245
1246 hwmon_device_unregister(data->hwmon_dev);
1247 w83781d_remove_files(dev);
1248
1249 i2c_unregister_device(data->lm75[0]);
1250 i2c_unregister_device(data->lm75[1]);
1251 }
1252
1253 static int
1254 w83781d_read_value_i2c(struct w83781d_data *data, u16 reg)
1255 {
1256 struct i2c_client *client = data->client;
1257 int res, bank;
1258 struct i2c_client *cl;
1259
1260 bank = (reg >> 8) & 0x0f;
1261 if (bank > 2)
1262 /* switch banks */
1263 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1264 bank);
1265 if (bank == 0 || bank > 2) {
1266 res = i2c_smbus_read_byte_data(client, reg & 0xff);
1267 } else {
1268 /* switch to subclient */
1269 cl = data->lm75[bank - 1];
1270 /* convert from ISA to LM75 I2C addresses */
1271 switch (reg & 0xff) {
1272 case 0x50: /* TEMP */
1273 res = i2c_smbus_read_word_swapped(cl, 0);
1274 break;
1275 case 0x52: /* CONFIG */
1276 res = i2c_smbus_read_byte_data(cl, 1);
1277 break;
1278 case 0x53: /* HYST */
1279 res = i2c_smbus_read_word_swapped(cl, 2);
1280 break;
1281 case 0x55: /* OVER */
1282 default:
1283 res = i2c_smbus_read_word_swapped(cl, 3);
1284 break;
1285 }
1286 }
1287 if (bank > 2)
1288 i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1289
1290 return res;
1291 }
1292
1293 static int
1294 w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value)
1295 {
1296 struct i2c_client *client = data->client;
1297 int bank;
1298 struct i2c_client *cl;
1299
1300 bank = (reg >> 8) & 0x0f;
1301 if (bank > 2)
1302 /* switch banks */
1303 i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
1304 bank);
1305 if (bank == 0 || bank > 2) {
1306 i2c_smbus_write_byte_data(client, reg & 0xff,
1307 value & 0xff);
1308 } else {
1309 /* switch to subclient */
1310 cl = data->lm75[bank - 1];
1311 /* convert from ISA to LM75 I2C addresses */
1312 switch (reg & 0xff) {
1313 case 0x52: /* CONFIG */
1314 i2c_smbus_write_byte_data(cl, 1, value & 0xff);
1315 break;
1316 case 0x53: /* HYST */
1317 i2c_smbus_write_word_swapped(cl, 2, value);
1318 break;
1319 case 0x55: /* OVER */
1320 i2c_smbus_write_word_swapped(cl, 3, value);
1321 break;
1322 }
1323 }
1324 if (bank > 2)
1325 i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
1326
1327 return 0;
1328 }
1329
1330 static void
1331 w83781d_init_device(struct device *dev)
1332 {
1333 struct w83781d_data *data = dev_get_drvdata(dev);
1334 int i, p;
1335 int type = data->type;
1336 u8 tmp;
1337
1338 if (reset && type != as99127f) { /*
1339 * this resets registers we don't have
1340 * documentation for on the as99127f
1341 */
1342 /*
1343 * Resetting the chip has been the default for a long time,
1344 * but it causes the BIOS initializations (fan clock dividers,
1345 * thermal sensor types...) to be lost, so it is now optional.
1346 * It might even go away if nobody reports it as being useful,
1347 * as I see very little reason why this would be needed at
1348 * all.
1349 */
1350 dev_info(dev,
1351 "If reset=1 solved a problem you were having, please report!\n");
1352
1353 /* save these registers */
1354 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1355 p = w83781d_read_value(data, W83781D_REG_PWMCLK12);
1356 /*
1357 * Reset all except Watchdog values and last conversion values
1358 * This sets fan-divs to 2, among others
1359 */
1360 w83781d_write_value(data, W83781D_REG_CONFIG, 0x80);
1361 /*
1362 * Restore the registers and disable power-on abnormal beep.
1363 * This saves FAN 1/2/3 input/output values set by BIOS.
1364 */
1365 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1366 w83781d_write_value(data, W83781D_REG_PWMCLK12, p);
1367 /*
1368 * Disable master beep-enable (reset turns it on).
1369 * Individual beep_mask should be reset to off but for some
1370 * reason disabling this bit helps some people not get beeped
1371 */
1372 w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0);
1373 }
1374
1375 /*
1376 * Disable power-on abnormal beep, as advised by the datasheet.
1377 * Already done if reset=1.
1378 */
1379 if (init && !reset && type != as99127f) {
1380 i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG);
1381 w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80);
1382 }
1383
1384 data->vrm = vid_which_vrm();
1385
1386 if ((type != w83781d) && (type != as99127f)) {
1387 tmp = w83781d_read_value(data, W83781D_REG_SCFG1);
1388 for (i = 1; i <= 3; i++) {
1389 if (!(tmp & BIT_SCFG1[i - 1])) {
1390 data->sens[i - 1] = 4;
1391 } else {
1392 if (w83781d_read_value
1393 (data,
1394 W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
1395 data->sens[i - 1] = 1;
1396 else
1397 data->sens[i - 1] = 2;
1398 }
1399 if (type == w83783s && i == 2)
1400 break;
1401 }
1402 }
1403
1404 if (init && type != as99127f) {
1405 /* Enable temp2 */
1406 tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG);
1407 if (tmp & 0x01) {
1408 dev_warn(dev,
1409 "Enabling temp2, readings might not make sense\n");
1410 w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG,
1411 tmp & 0xfe);
1412 }
1413
1414 /* Enable temp3 */
1415 if (type != w83783s) {
1416 tmp = w83781d_read_value(data,
1417 W83781D_REG_TEMP3_CONFIG);
1418 if (tmp & 0x01) {
1419 dev_warn(dev,
1420 "Enabling temp3, readings might not make sense\n");
1421 w83781d_write_value(data,
1422 W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
1423 }
1424 }
1425 }
1426
1427 /* Start monitoring */
1428 w83781d_write_value(data, W83781D_REG_CONFIG,
1429 (w83781d_read_value(data,
1430 W83781D_REG_CONFIG) & 0xf7)
1431 | 0x01);
1432
1433 /* A few vars need to be filled upon startup */
1434 for (i = 0; i < 3; i++) {
1435 data->fan_min[i] = w83781d_read_value(data,
1436 W83781D_REG_FAN_MIN(i));
1437 }
1438
1439 mutex_init(&data->update_lock);
1440 }
1441
1442 static struct w83781d_data *w83781d_update_device(struct device *dev)
1443 {
1444 struct w83781d_data *data = dev_get_drvdata(dev);
1445 struct i2c_client *client = data->client;
1446 int i;
1447
1448 mutex_lock(&data->update_lock);
1449
1450 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
1451 || !data->valid) {
1452 dev_dbg(dev, "Starting device update\n");
1453
1454 for (i = 0; i <= 8; i++) {
1455 if (data->type == w83783s && i == 1)
1456 continue; /* 783S has no in1 */
1457 data->in[i] =
1458 w83781d_read_value(data, W83781D_REG_IN(i));
1459 data->in_min[i] =
1460 w83781d_read_value(data, W83781D_REG_IN_MIN(i));
1461 data->in_max[i] =
1462 w83781d_read_value(data, W83781D_REG_IN_MAX(i));
1463 if ((data->type != w83782d) && (i == 6))
1464 break;
1465 }
1466 for (i = 0; i < 3; i++) {
1467 data->fan[i] =
1468 w83781d_read_value(data, W83781D_REG_FAN(i));
1469 data->fan_min[i] =
1470 w83781d_read_value(data, W83781D_REG_FAN_MIN(i));
1471 }
1472 if (data->type != w83781d && data->type != as99127f) {
1473 for (i = 0; i < 4; i++) {
1474 data->pwm[i] =
1475 w83781d_read_value(data,
1476 W83781D_REG_PWM[i]);
1477 /* Only W83782D on SMBus has PWM3 and PWM4 */
1478 if ((data->type != w83782d || !client)
1479 && i == 1)
1480 break;
1481 }
1482 /* Only PWM2 can be disabled */
1483 data->pwm2_enable = (w83781d_read_value(data,
1484 W83781D_REG_PWMCLK12) & 0x08) >> 3;
1485 }
1486
1487 data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1));
1488 data->temp_max =
1489 w83781d_read_value(data, W83781D_REG_TEMP_OVER(1));
1490 data->temp_max_hyst =
1491 w83781d_read_value(data, W83781D_REG_TEMP_HYST(1));
1492 data->temp_add[0] =
1493 w83781d_read_value(data, W83781D_REG_TEMP(2));
1494 data->temp_max_add[0] =
1495 w83781d_read_value(data, W83781D_REG_TEMP_OVER(2));
1496 data->temp_max_hyst_add[0] =
1497 w83781d_read_value(data, W83781D_REG_TEMP_HYST(2));
1498 if (data->type != w83783s) {
1499 data->temp_add[1] =
1500 w83781d_read_value(data, W83781D_REG_TEMP(3));
1501 data->temp_max_add[1] =
1502 w83781d_read_value(data,
1503 W83781D_REG_TEMP_OVER(3));
1504 data->temp_max_hyst_add[1] =
1505 w83781d_read_value(data,
1506 W83781D_REG_TEMP_HYST(3));
1507 }
1508 i = w83781d_read_value(data, W83781D_REG_VID_FANDIV);
1509 data->vid = i & 0x0f;
1510 data->vid |= (w83781d_read_value(data,
1511 W83781D_REG_CHIPID) & 0x01) << 4;
1512 data->fan_div[0] = (i >> 4) & 0x03;
1513 data->fan_div[1] = (i >> 6) & 0x03;
1514 data->fan_div[2] = (w83781d_read_value(data,
1515 W83781D_REG_PIN) >> 6) & 0x03;
1516 if ((data->type != w83781d) && (data->type != as99127f)) {
1517 i = w83781d_read_value(data, W83781D_REG_VBAT);
1518 data->fan_div[0] |= (i >> 3) & 0x04;
1519 data->fan_div[1] |= (i >> 4) & 0x04;
1520 data->fan_div[2] |= (i >> 5) & 0x04;
1521 }
1522 if (data->type == w83782d) {
1523 data->alarms = w83781d_read_value(data,
1524 W83782D_REG_ALARM1)
1525 | (w83781d_read_value(data,
1526 W83782D_REG_ALARM2) << 8)
1527 | (w83781d_read_value(data,
1528 W83782D_REG_ALARM3) << 16);
1529 } else if (data->type == w83783s) {
1530 data->alarms = w83781d_read_value(data,
1531 W83782D_REG_ALARM1)
1532 | (w83781d_read_value(data,
1533 W83782D_REG_ALARM2) << 8);
1534 } else {
1535 /*
1536 * No real-time status registers, fall back to
1537 * interrupt status registers
1538 */
1539 data->alarms = w83781d_read_value(data,
1540 W83781D_REG_ALARM1)
1541 | (w83781d_read_value(data,
1542 W83781D_REG_ALARM2) << 8);
1543 }
1544 i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2);
1545 data->beep_mask = (i << 8) +
1546 w83781d_read_value(data, W83781D_REG_BEEP_INTS1);
1547 if ((data->type != w83781d) && (data->type != as99127f)) {
1548 data->beep_mask |=
1549 w83781d_read_value(data,
1550 W83781D_REG_BEEP_INTS3) << 16;
1551 }
1552 data->last_updated = jiffies;
1553 data->valid = true;
1554 }
1555
1556 mutex_unlock(&data->update_lock);
1557
1558 return data;
1559 }
1560
1561 static const struct i2c_device_id w83781d_ids[] = {
1562 { "w83781d", w83781d, },
1563 { "w83782d", w83782d, },
1564 { "w83783s", w83783s, },
1565 { "as99127f", as99127f },
1566 { /* LIST END */ }
1567 };
1568 MODULE_DEVICE_TABLE(i2c, w83781d_ids);
1569
1570 static const struct of_device_id w83781d_of_match[] = {
1571 { .compatible = "winbond,w83781d" },
1572 { .compatible = "winbond,w83781g" },
1573 { .compatible = "winbond,w83782d" },
1574 { .compatible = "winbond,w83783s" },
1575 { .compatible = "asus,as99127f" },
1576 { },
1577 };
1578 MODULE_DEVICE_TABLE(of, w83781d_of_match);
1579
1580 static struct i2c_driver w83781d_driver = {
1581 .class = I2C_CLASS_HWMON,
1582 .driver = {
1583 .name = "w83781d",
1584 .of_match_table = w83781d_of_match,
1585 },
1586 .probe = w83781d_probe,
1587 .remove = w83781d_remove,
1588 .id_table = w83781d_ids,
1589 .detect = w83781d_detect,
1590 .address_list = normal_i2c,
1591 };
1592
1593 /*
1594 * ISA related code
1595 */
1596 #ifdef CONFIG_ISA
1597
1598 /* ISA device, if found */
1599 static struct platform_device *pdev;
1600
1601 static unsigned short isa_address = 0x290;
1602
1603 /*
1604 * I2C devices get this name attribute automatically, but for ISA devices
1605 * we must create it by ourselves.
1606 */
1607 static ssize_t
1608 name_show(struct device *dev, struct device_attribute *devattr, char *buf)
1609 {
1610 struct w83781d_data *data = dev_get_drvdata(dev);
1611 return sprintf(buf, "%s\n", data->name);
1612 }
1613 static DEVICE_ATTR_RO(name);
1614
1615 static struct w83781d_data *w83781d_data_if_isa(void)
1616 {
1617 return pdev ? platform_get_drvdata(pdev) : NULL;
1618 }
1619
1620 /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */
1621 static int w83781d_alias_detect(struct i2c_client *client, u8 chipid)
1622 {
1623 struct w83781d_data *isa;
1624 int i;
1625
1626 if (!pdev) /* No ISA chip */
1627 return 0;
1628
1629 isa = platform_get_drvdata(pdev);
1630
1631 if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr)
1632 return 0; /* Address doesn't match */
1633 if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid)
1634 return 0; /* Chip type doesn't match */
1635
1636 /*
1637 * We compare all the limit registers, the config register and the
1638 * interrupt mask registers
1639 */
1640 for (i = 0x2b; i <= 0x3d; i++) {
1641 if (w83781d_read_value(isa, i) !=
1642 i2c_smbus_read_byte_data(client, i))
1643 return 0;
1644 }
1645 if (w83781d_read_value(isa, W83781D_REG_CONFIG) !=
1646 i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG))
1647 return 0;
1648 for (i = 0x43; i <= 0x46; i++) {
1649 if (w83781d_read_value(isa, i) !=
1650 i2c_smbus_read_byte_data(client, i))
1651 return 0;
1652 }
1653
1654 return 1;
1655 }
1656
1657 static int
1658 w83781d_read_value_isa(struct w83781d_data *data, u16 reg)
1659 {
1660 int word_sized, res;
1661
1662 word_sized = (((reg & 0xff00) == 0x100)
1663 || ((reg & 0xff00) == 0x200))
1664 && (((reg & 0x00ff) == 0x50)
1665 || ((reg & 0x00ff) == 0x53)
1666 || ((reg & 0x00ff) == 0x55));
1667 if (reg & 0xff00) {
1668 outb_p(W83781D_REG_BANK,
1669 data->isa_addr + W83781D_ADDR_REG_OFFSET);
1670 outb_p(reg >> 8,
1671 data->isa_addr + W83781D_DATA_REG_OFFSET);
1672 }
1673 outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1674 res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET);
1675 if (word_sized) {
1676 outb_p((reg & 0xff) + 1,
1677 data->isa_addr + W83781D_ADDR_REG_OFFSET);
1678 res =
1679 (res << 8) + inb_p(data->isa_addr +
1680 W83781D_DATA_REG_OFFSET);
1681 }
1682 if (reg & 0xff00) {
1683 outb_p(W83781D_REG_BANK,
1684 data->isa_addr + W83781D_ADDR_REG_OFFSET);
1685 outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1686 }
1687 return res;
1688 }
1689
1690 static void
1691 w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value)
1692 {
1693 int word_sized;
1694
1695 word_sized = (((reg & 0xff00) == 0x100)
1696 || ((reg & 0xff00) == 0x200))
1697 && (((reg & 0x00ff) == 0x53)
1698 || ((reg & 0x00ff) == 0x55));
1699 if (reg & 0xff00) {
1700 outb_p(W83781D_REG_BANK,
1701 data->isa_addr + W83781D_ADDR_REG_OFFSET);
1702 outb_p(reg >> 8,
1703 data->isa_addr + W83781D_DATA_REG_OFFSET);
1704 }
1705 outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET);
1706 if (word_sized) {
1707 outb_p(value >> 8,
1708 data->isa_addr + W83781D_DATA_REG_OFFSET);
1709 outb_p((reg & 0xff) + 1,
1710 data->isa_addr + W83781D_ADDR_REG_OFFSET);
1711 }
1712 outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET);
1713 if (reg & 0xff00) {
1714 outb_p(W83781D_REG_BANK,
1715 data->isa_addr + W83781D_ADDR_REG_OFFSET);
1716 outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET);
1717 }
1718 }
1719
1720 /*
1721 * The SMBus locks itself, usually, but nothing may access the Winbond between
1722 * bank switches. ISA access must always be locked explicitly!
1723 * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
1724 * would slow down the W83781D access and should not be necessary.
1725 * There are some ugly typecasts here, but the good news is - they should
1726 * nowhere else be necessary!
1727 */
1728 static int
1729 w83781d_read_value(struct w83781d_data *data, u16 reg)
1730 {
1731 struct i2c_client *client = data->client;
1732 int res;
1733
1734 mutex_lock(&data->lock);
1735 if (client)
1736 res = w83781d_read_value_i2c(data, reg);
1737 else
1738 res = w83781d_read_value_isa(data, reg);
1739 mutex_unlock(&data->lock);
1740 return res;
1741 }
1742
1743 static int
1744 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
1745 {
1746 struct i2c_client *client = data->client;
1747
1748 mutex_lock(&data->lock);
1749 if (client)
1750 w83781d_write_value_i2c(data, reg, value);
1751 else
1752 w83781d_write_value_isa(data, reg, value);
1753 mutex_unlock(&data->lock);
1754 return 0;
1755 }
1756
1757 static int
1758 w83781d_isa_probe(struct platform_device *pdev)
1759 {
1760 int err, reg;
1761 struct w83781d_data *data;
1762 struct resource *res;
1763
1764 /* Reserve the ISA region */
1765 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1766 if (!devm_request_region(&pdev->dev,
1767 res->start + W83781D_ADDR_REG_OFFSET, 2,
1768 "w83781d"))
1769 return -EBUSY;
1770
1771 data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data),
1772 GFP_KERNEL);
1773 if (!data)
1774 return -ENOMEM;
1775
1776 mutex_init(&data->lock);
1777 data->isa_addr = res->start;
1778 platform_set_drvdata(pdev, data);
1779
1780 reg = w83781d_read_value(data, W83781D_REG_WCHIPID);
1781 switch (reg) {
1782 case 0x30:
1783 data->type = w83782d;
1784 data->name = "w83782d";
1785 break;
1786 default:
1787 data->type = w83781d;
1788 data->name = "w83781d";
1789 }
1790
1791 /* Initialize the W83781D chip */
1792 w83781d_init_device(&pdev->dev);
1793
1794 /* Register sysfs hooks */
1795 err = w83781d_create_files(&pdev->dev, data->type, 1);
1796 if (err)
1797 goto exit_remove_files;
1798
1799 err = device_create_file(&pdev->dev, &dev_attr_name);
1800 if (err)
1801 goto exit_remove_files;
1802
1803 data->hwmon_dev = hwmon_device_register(&pdev->dev);
1804 if (IS_ERR(data->hwmon_dev)) {
1805 err = PTR_ERR(data->hwmon_dev);
1806 goto exit_remove_files;
1807 }
1808
1809 return 0;
1810
1811 exit_remove_files:
1812 w83781d_remove_files(&pdev->dev);
1813 device_remove_file(&pdev->dev, &dev_attr_name);
1814 return err;
1815 }
1816
1817 static void w83781d_isa_remove(struct platform_device *pdev)
1818 {
1819 struct w83781d_data *data = platform_get_drvdata(pdev);
1820
1821 hwmon_device_unregister(data->hwmon_dev);
1822 w83781d_remove_files(&pdev->dev);
1823 device_remove_file(&pdev->dev, &dev_attr_name);
1824 }
1825
1826 static struct platform_driver w83781d_isa_driver = {
1827 .driver = {
1828 .name = "w83781d",
1829 },
1830 .probe = w83781d_isa_probe,
1831 .remove = w83781d_isa_remove,
1832 };
1833
1834 /* return 1 if a supported chip is found, 0 otherwise */
1835 static int __init
1836 w83781d_isa_found(unsigned short address)
1837 {
1838 int val, save, found = 0;
1839 int port;
1840
1841 /*
1842 * Some boards declare base+0 to base+7 as a PNP device, some base+4
1843 * to base+7 and some base+5 to base+6. So we better request each port
1844 * individually for the probing phase.
1845 */
1846 for (port = address; port < address + W83781D_EXTENT; port++) {
1847 if (!request_region(port, 1, "w83781d")) {
1848 pr_debug("Failed to request port 0x%x\n", port);
1849 goto release;
1850 }
1851 }
1852
1853 #define REALLY_SLOW_IO
1854 /*
1855 * We need the timeouts for at least some W83781D-like
1856 * chips. But only if we read 'undefined' registers.
1857 */
1858 val = inb_p(address + 1);
1859 if (inb_p(address + 2) != val
1860 || inb_p(address + 3) != val
1861 || inb_p(address + 7) != val) {
1862 pr_debug("Detection failed at step %d\n", 1);
1863 goto release;
1864 }
1865 #undef REALLY_SLOW_IO
1866
1867 /*
1868 * We should be able to change the 7 LSB of the address port. The
1869 * MSB (busy flag) should be clear initially, set after the write.
1870 */
1871 save = inb_p(address + W83781D_ADDR_REG_OFFSET);
1872 if (save & 0x80) {
1873 pr_debug("Detection failed at step %d\n", 2);
1874 goto release;
1875 }
1876 val = ~save & 0x7f;
1877 outb_p(val, address + W83781D_ADDR_REG_OFFSET);
1878 if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
1879 outb_p(save, address + W83781D_ADDR_REG_OFFSET);
1880 pr_debug("Detection failed at step %d\n", 3);
1881 goto release;
1882 }
1883
1884 /* We found a device, now see if it could be a W83781D */
1885 outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
1886 val = inb_p(address + W83781D_DATA_REG_OFFSET);
1887 if (val & 0x80) {
1888 pr_debug("Detection failed at step %d\n", 4);
1889 goto release;
1890 }
1891 outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1892 save = inb_p(address + W83781D_DATA_REG_OFFSET);
1893 outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET);
1894 val = inb_p(address + W83781D_DATA_REG_OFFSET);
1895 if ((!(save & 0x80) && (val != 0xa3))
1896 || ((save & 0x80) && (val != 0x5c))) {
1897 pr_debug("Detection failed at step %d\n", 5);
1898 goto release;
1899 }
1900 outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
1901 val = inb_p(address + W83781D_DATA_REG_OFFSET);
1902 if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */
1903 pr_debug("Detection failed at step %d\n", 6);
1904 goto release;
1905 }
1906
1907 /* The busy flag should be clear again */
1908 if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
1909 pr_debug("Detection failed at step %d\n", 7);
1910 goto release;
1911 }
1912
1913 /* Determine the chip type */
1914 outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
1915 save = inb_p(address + W83781D_DATA_REG_OFFSET);
1916 outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET);
1917 outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET);
1918 val = inb_p(address + W83781D_DATA_REG_OFFSET);
1919 if ((val & 0xfe) == 0x10 /* W83781D */
1920 || val == 0x30) /* W83782D */
1921 found = 1;
1922
1923 if (found)
1924 pr_info("Found a %s chip at %#x\n",
1925 val == 0x30 ? "W83782D" : "W83781D", (int)address);
1926
1927 release:
1928 for (port--; port >= address; port--)
1929 release_region(port, 1);
1930 return found;
1931 }
1932
1933 static int __init
1934 w83781d_isa_device_add(unsigned short address)
1935 {
1936 struct resource res = {
1937 .start = address,
1938 .end = address + W83781D_EXTENT - 1,
1939 .name = "w83781d",
1940 .flags = IORESOURCE_IO,
1941 };
1942 int err;
1943
1944 pdev = platform_device_alloc("w83781d", address);
1945 if (!pdev) {
1946 err = -ENOMEM;
1947 pr_err("Device allocation failed\n");
1948 goto exit;
1949 }
1950
1951 err = platform_device_add_resources(pdev, &res, 1);
1952 if (err) {
1953 pr_err("Device resource addition failed (%d)\n", err);
1954 goto exit_device_put;
1955 }
1956
1957 err = platform_device_add(pdev);
1958 if (err) {
1959 pr_err("Device addition failed (%d)\n", err);
1960 goto exit_device_put;
1961 }
1962
1963 return 0;
1964
1965 exit_device_put:
1966 platform_device_put(pdev);
1967 exit:
1968 pdev = NULL;
1969 return err;
1970 }
1971
1972 static int __init
1973 w83781d_isa_register(void)
1974 {
1975 int res;
1976
1977 if (w83781d_isa_found(isa_address)) {
1978 res = platform_driver_register(&w83781d_isa_driver);
1979 if (res)
1980 goto exit;
1981
1982 /* Sets global pdev as a side effect */
1983 res = w83781d_isa_device_add(isa_address);
1984 if (res)
1985 goto exit_unreg_isa_driver;
1986 }
1987
1988 return 0;
1989
1990 exit_unreg_isa_driver:
1991 platform_driver_unregister(&w83781d_isa_driver);
1992 exit:
1993 return res;
1994 }
1995
1996 static void
1997 w83781d_isa_unregister(void)
1998 {
1999 if (pdev) {
2000 platform_device_unregister(pdev);
2001 platform_driver_unregister(&w83781d_isa_driver);
2002 }
2003 }
2004 #else /* !CONFIG_ISA */
2005
2006 static struct w83781d_data *w83781d_data_if_isa(void)
2007 {
2008 return NULL;
2009 }
2010
2011 static int
2012 w83781d_alias_detect(struct i2c_client *client, u8 chipid)
2013 {
2014 return 0;
2015 }
2016
2017 static int
2018 w83781d_read_value(struct w83781d_data *data, u16 reg)
2019 {
2020 int res;
2021
2022 mutex_lock(&data->lock);
2023 res = w83781d_read_value_i2c(data, reg);
2024 mutex_unlock(&data->lock);
2025
2026 return res;
2027 }
2028
2029 static int
2030 w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value)
2031 {
2032 mutex_lock(&data->lock);
2033 w83781d_write_value_i2c(data, reg, value);
2034 mutex_unlock(&data->lock);
2035
2036 return 0;
2037 }
2038
2039 static int __init
2040 w83781d_isa_register(void)
2041 {
2042 return 0;
2043 }
2044
2045 static void
2046 w83781d_isa_unregister(void)
2047 {
2048 }
2049 #endif /* CONFIG_ISA */
2050
2051 static int __init
2052 sensors_w83781d_init(void)
2053 {
2054 int res;
2055
2056 /*
2057 * We register the ISA device first, so that we can skip the
2058 * registration of an I2C interface to the same device.
2059 */
2060 res = w83781d_isa_register();
2061 if (res)
2062 goto exit;
2063
2064 res = i2c_add_driver(&w83781d_driver);
2065 if (res)
2066 goto exit_unreg_isa;
2067
2068 return 0;
2069
2070 exit_unreg_isa:
2071 w83781d_isa_unregister();
2072 exit:
2073 return res;
2074 }
2075
2076 static void __exit
2077 sensors_w83781d_exit(void)
2078 {
2079 w83781d_isa_unregister();
2080 i2c_del_driver(&w83781d_driver);
2081 }
2082
2083 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
2084 "Philip Edelbrock <phil@netroedge.com>, "
2085 "and Mark Studebaker <mdsxyz123@yahoo.com>");
2086 MODULE_DESCRIPTION("W83781D driver");
2087 MODULE_LICENSE("GPL");
2088
2089 module_init(sensors_w83781d_init);
2090 module_exit(sensors_w83781d_exit);
Kernel DRM miscellaneous fixes and cross-tree changes