Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace...

[drm/drm-misc.git] / drivers / media / i2c / max9286.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Maxim MAX9286 GMSL Deserializer Driver
 *
 * Copyright (C) 2017-2019 Jacopo Mondi
 * Copyright (C) 2017-2019 Kieran Bingham
 * Copyright (C) 2017-2019 Laurent Pinchart
 * Copyright (C) 2017-2019 Niklas Söderlund
 * Copyright (C) 2016 Renesas Electronics Corporation
 * Copyright (C) 2015 Cogent Embedded, Inc.
 */

#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fwnode.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>

#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>

/* Register 0x00 */
#define MAX9286_MSTLINKSEL_AUTO         (7 << 5)
#define MAX9286_MSTLINKSEL(n)           ((n) << 5)
#define MAX9286_EN_VS_GEN               BIT(4)
#define MAX9286_LINKEN(n)               (1 << (n))
/* Register 0x01 */
#define MAX9286_FSYNCMODE_ECU           (3 << 6)
#define MAX9286_FSYNCMODE_EXT           (2 << 6)
#define MAX9286_FSYNCMODE_INT_OUT       (1 << 6)
#define MAX9286_FSYNCMODE_INT_HIZ       (0 << 6)
#define MAX9286_GPIEN                   BIT(5)
#define MAX9286_ENLMO_RSTFSYNC          BIT(2)
#define MAX9286_FSYNCMETH_AUTO          (2 << 0)
#define MAX9286_FSYNCMETH_SEMI_AUTO     (1 << 0)
#define MAX9286_FSYNCMETH_MANUAL        (0 << 0)
#define MAX9286_REG_FSYNC_PERIOD_L      0x06
#define MAX9286_REG_FSYNC_PERIOD_M      0x07
#define MAX9286_REG_FSYNC_PERIOD_H      0x08
/* Register 0x0a */
#define MAX9286_FWDCCEN(n)              (1 << ((n) + 4))
#define MAX9286_REVCCEN(n)              (1 << (n))
/* Register 0x0c */
#define MAX9286_HVEN                    BIT(7)
#define MAX9286_EDC_6BIT_HAMMING        (2 << 5)
#define MAX9286_EDC_6BIT_CRC            (1 << 5)
#define MAX9286_EDC_1BIT_PARITY         (0 << 5)
#define MAX9286_DESEL                   BIT(4)
#define MAX9286_INVVS                   BIT(3)
#define MAX9286_INVHS                   BIT(2)
#define MAX9286_HVSRC_D0                (2 << 0)
#define MAX9286_HVSRC_D14               (1 << 0)
#define MAX9286_HVSRC_D18               (0 << 0)
/* Register 0x0f */
#define MAX9286_0X0F_RESERVED           BIT(3)
/* Register 0x12 */
#define MAX9286_CSILANECNT(n)           (((n) - 1) << 6)
#define MAX9286_CSIDBL                  BIT(5)
#define MAX9286_DBL                     BIT(4)
#define MAX9286_DATATYPE_USER_8BIT      (11 << 0)
#define MAX9286_DATATYPE_USER_YUV_12BIT (10 << 0)
#define MAX9286_DATATYPE_USER_24BIT     (9 << 0)
#define MAX9286_DATATYPE_RAW14          (8 << 0)
#define MAX9286_DATATYPE_RAW12          (7 << 0)
#define MAX9286_DATATYPE_RAW10          (6 << 0)
#define MAX9286_DATATYPE_RAW8           (5 << 0)
#define MAX9286_DATATYPE_YUV422_10BIT   (4 << 0)
#define MAX9286_DATATYPE_YUV422_8BIT    (3 << 0)
#define MAX9286_DATATYPE_RGB555         (2 << 0)
#define MAX9286_DATATYPE_RGB565         (1 << 0)
#define MAX9286_DATATYPE_RGB888         (0 << 0)
/* Register 0x15 */
#define MAX9286_CSI_IMAGE_TYP           BIT(7)
#define MAX9286_VC(n)                   ((n) << 5)
#define MAX9286_VCTYPE                  BIT(4)
#define MAX9286_CSIOUTEN                BIT(3)
#define MAX9286_SWP_ENDIAN              BIT(2)
#define MAX9286_EN_CCBSYB_CLK_STR       BIT(1)
#define MAX9286_EN_GPI_CCBSYB           BIT(0)
/* Register 0x1b */
#define MAX9286_SWITCHIN(n)             (1 << ((n) + 4))
#define MAX9286_ENEQ(n)                 (1 << (n))
/* Register 0x1c */
#define MAX9286_HIGHIMM(n)              BIT((n) + 4)
#define MAX9286_I2CSEL                  BIT(2)
#define MAX9286_HIBW                    BIT(1)
#define MAX9286_BWS                     BIT(0)
/* Register 0x27 */
#define MAX9286_LOCKED                  BIT(7)
/* Register 0x31 */
#define MAX9286_FSYNC_LOCKED            BIT(6)
/* Register 0x34 */
#define MAX9286_I2CLOCACK               BIT(7)
#define MAX9286_I2CSLVSH_1046NS_469NS   (3 << 5)
#define MAX9286_I2CSLVSH_938NS_352NS    (2 << 5)
#define MAX9286_I2CSLVSH_469NS_234NS    (1 << 5)
#define MAX9286_I2CSLVSH_352NS_117NS    (0 << 5)
#define MAX9286_I2CMSTBT_837KBPS        (7 << 2)
#define MAX9286_I2CMSTBT_533KBPS        (6 << 2)
#define MAX9286_I2CMSTBT_339KBPS        (5 << 2)
#define MAX9286_I2CMSTBT_173KBPS        (4 << 2)
#define MAX9286_I2CMSTBT_105KBPS        (3 << 2)
#define MAX9286_I2CMSTBT_84KBPS         (2 << 2)
#define MAX9286_I2CMSTBT_28KBPS         (1 << 2)
#define MAX9286_I2CMSTBT_8KBPS          (0 << 2)
#define MAX9286_I2CSLVTO_NONE           (3 << 0)
#define MAX9286_I2CSLVTO_1024US         (2 << 0)
#define MAX9286_I2CSLVTO_256US          (1 << 0)
#define MAX9286_I2CSLVTO_64US           (0 << 0)
/* Register 0x3b */
#define MAX9286_REV_TRF(n)              ((n) << 4)
#define MAX9286_REV_AMP(n)              ((((n) - 30) / 10) << 1) /* in mV */
#define MAX9286_REV_AMP_X               BIT(0)
#define MAX9286_REV_AMP_HIGH            170
/* Register 0x3f */
#define MAX9286_EN_REV_CFG              BIT(6)
#define MAX9286_REV_FLEN(n)             ((n) - 20)
/* Register 0x49 */
#define MAX9286_VIDEO_DETECT_MASK       0x0f
/* Register 0x69 */
#define MAX9286_LFLTBMONMASKED          BIT(7)
#define MAX9286_LOCKMONMASKED           BIT(6)
#define MAX9286_AUTOCOMBACKEN           BIT(5)
#define MAX9286_AUTOMASKEN              BIT(4)
#define MAX9286_MASKLINK(n)             ((n) << 0)

/*
 * The sink and source pads are created to match the OF graph port numbers so
 * that their indexes can be used interchangeably.
 */
#define MAX9286_NUM_GMSL                4
#define MAX9286_N_SINKS                 4
#define MAX9286_N_PADS                  5
#define MAX9286_SRC_PAD                 4

struct max9286_format_info {
        u32 code;
        u8 datatype;
};

struct max9286_i2c_speed {
        u32 rate;
        u8 mstbt;
};

struct max9286_source {
        struct v4l2_subdev *sd;
        struct fwnode_handle *fwnode;
        struct regulator *regulator;
};

struct max9286_asd {
        struct v4l2_async_connection base;
        struct max9286_source *source;
};

static inline struct max9286_asd *
to_max9286_asd(struct v4l2_async_connection *asd)
{
        return container_of(asd, struct max9286_asd, base);
}

struct max9286_priv {
        struct i2c_client *client;
        struct gpio_desc *gpiod_pwdn;
        struct v4l2_subdev sd;
        struct media_pad pads[MAX9286_N_PADS];
        struct regulator *regulator;

        struct gpio_chip gpio;
        u8 gpio_state;

        struct i2c_mux_core *mux;
        unsigned int mux_channel;
        bool mux_open;

        /* The initial reverse control channel amplitude. */
        u32 init_rev_chan_mv;
        u32 rev_chan_mv;
        u8 i2c_mstbt;
        u32 bus_width;

        bool use_gpio_poc;
        u32 gpio_poc[2];

        struct v4l2_ctrl_handler ctrls;
        struct v4l2_ctrl *pixelrate_ctrl;
        unsigned int pixelrate;

        unsigned int nsources;
        unsigned int source_mask;
        unsigned int route_mask;
        unsigned int bound_sources;
        unsigned int csi2_data_lanes;
        struct max9286_source sources[MAX9286_NUM_GMSL];
        struct v4l2_async_notifier notifier;
};

static struct max9286_source *next_source(struct max9286_priv *priv,
                                          struct max9286_source *source)
{
        if (!source)
                source = &priv->sources[0];
        else
                source++;

        for (; source < &priv->sources[MAX9286_NUM_GMSL]; source++) {
                if (source->fwnode)
                        return source;
        }

        return NULL;
}

#define for_each_source(priv, source) \
        for ((source) = NULL; ((source) = next_source((priv), (source))); )

#define to_index(priv, source) ((source) - &(priv)->sources[0])

static inline struct max9286_priv *sd_to_max9286(struct v4l2_subdev *sd)
{
        return container_of(sd, struct max9286_priv, sd);
}

static const struct max9286_format_info max9286_formats[] = {
        {
                .code = MEDIA_BUS_FMT_UYVY8_1X16,
                .datatype = MAX9286_DATATYPE_YUV422_8BIT,
        }, {
                .code = MEDIA_BUS_FMT_VYUY8_1X16,
                .datatype = MAX9286_DATATYPE_YUV422_8BIT,
        }, {
                .code = MEDIA_BUS_FMT_YUYV8_1X16,
                .datatype = MAX9286_DATATYPE_YUV422_8BIT,
        }, {
                .code = MEDIA_BUS_FMT_YVYU8_1X16,
                .datatype = MAX9286_DATATYPE_YUV422_8BIT,
        }, {
                .code = MEDIA_BUS_FMT_SBGGR12_1X12,
                .datatype = MAX9286_DATATYPE_RAW12,
        }, {
                .code = MEDIA_BUS_FMT_SGBRG12_1X12,
                .datatype = MAX9286_DATATYPE_RAW12,
        }, {
                .code = MEDIA_BUS_FMT_SGRBG12_1X12,
                .datatype = MAX9286_DATATYPE_RAW12,
        }, {
                .code = MEDIA_BUS_FMT_SRGGB12_1X12,
                .datatype = MAX9286_DATATYPE_RAW12,
        },
};

static const struct max9286_i2c_speed max9286_i2c_speeds[] = {
        { .rate =   8470, .mstbt = MAX9286_I2CMSTBT_8KBPS },
        { .rate =  28300, .mstbt = MAX9286_I2CMSTBT_28KBPS },
        { .rate =  84700, .mstbt = MAX9286_I2CMSTBT_84KBPS },
        { .rate = 105000, .mstbt = MAX9286_I2CMSTBT_105KBPS },
        { .rate = 173000, .mstbt = MAX9286_I2CMSTBT_173KBPS },
        { .rate = 339000, .mstbt = MAX9286_I2CMSTBT_339KBPS },
        { .rate = 533000, .mstbt = MAX9286_I2CMSTBT_533KBPS },
        { .rate = 837000, .mstbt = MAX9286_I2CMSTBT_837KBPS },
};

/* -----------------------------------------------------------------------------
 * I2C IO
 */

static int max9286_read(struct max9286_priv *priv, u8 reg)
{
        int ret;

        ret = i2c_smbus_read_byte_data(priv->client, reg);
        if (ret < 0)
                dev_err(&priv->client->dev,
                        "%s: register 0x%02x read failed (%d)\n",
                        __func__, reg, ret);

        return ret;
}

static int max9286_write(struct max9286_priv *priv, u8 reg, u8 val)
{
        int ret;

        ret = i2c_smbus_write_byte_data(priv->client, reg, val);
        if (ret < 0)
                dev_err(&priv->client->dev,
                        "%s: register 0x%02x write failed (%d)\n",
                        __func__, reg, ret);

        return ret;
}

/* -----------------------------------------------------------------------------
 * I2C Multiplexer
 */

static void max9286_i2c_mux_configure(struct max9286_priv *priv, u8 conf)
{
        max9286_write(priv, 0x0a, conf);

        /*
         * We must sleep after any change to the forward or reverse channel
         * configuration.
         */
        usleep_range(3000, 5000);
}

static void max9286_i2c_mux_open(struct max9286_priv *priv)
{
        /* Open all channels on the MAX9286 */
        max9286_i2c_mux_configure(priv, 0xff);

        priv->mux_open = true;
}

static void max9286_i2c_mux_close(struct max9286_priv *priv)
{
        /*
         * Ensure that both the forward and reverse channel are disabled on the
         * mux, and that the channel ID is invalidated to ensure we reconfigure
         * on the next max9286_i2c_mux_select() call.
         */
        max9286_i2c_mux_configure(priv, 0x00);

        priv->mux_open = false;
        priv->mux_channel = -1;
}

static int max9286_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
{
        struct max9286_priv *priv = i2c_mux_priv(muxc);

        /* Channel select is disabled when configured in the opened state. */
        if (priv->mux_open)
                return 0;

        if (priv->mux_channel == chan)
                return 0;

        priv->mux_channel = chan;

        max9286_i2c_mux_configure(priv, MAX9286_FWDCCEN(chan) |
                                        MAX9286_REVCCEN(chan));

        return 0;
}

static int max9286_i2c_mux_init(struct max9286_priv *priv)
{
        struct max9286_source *source;
        int ret;

        if (!i2c_check_functionality(priv->client->adapter,
                                     I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
                return -ENODEV;

        priv->mux = i2c_mux_alloc(priv->client->adapter, &priv->client->dev,
                                  priv->nsources, 0, I2C_MUX_LOCKED,
                                  max9286_i2c_mux_select, NULL);
        if (!priv->mux)
                return -ENOMEM;

        priv->mux->priv = priv;

        for_each_source(priv, source) {
                unsigned int index = to_index(priv, source);

                ret = i2c_mux_add_adapter(priv->mux, 0, index);
                if (ret < 0)
                        goto error;
        }

        return 0;

error:
        i2c_mux_del_adapters(priv->mux);
        return ret;
}

static void max9286_configure_i2c(struct max9286_priv *priv, bool localack)
{
        u8 config = MAX9286_I2CSLVSH_469NS_234NS | MAX9286_I2CSLVTO_1024US |
                    priv->i2c_mstbt;

        if (localack)
                config |= MAX9286_I2CLOCACK;

        max9286_write(priv, 0x34, config);
        usleep_range(3000, 5000);
}

static void max9286_reverse_channel_setup(struct max9286_priv *priv,
                                          unsigned int chan_amplitude)
{
        u8 chan_config;

        if (priv->rev_chan_mv == chan_amplitude)
                return;

        priv->rev_chan_mv = chan_amplitude;

        /* Reverse channel transmission time: default to 1. */
        chan_config = MAX9286_REV_TRF(1);

        /*
         * Reverse channel setup.
         *
         * - Enable custom reverse channel configuration (through register 0x3f)
         *   and set the first pulse length to 35 clock cycles.
         * - Adjust reverse channel amplitude: values > 130 are programmed
         *   using the additional +100mV REV_AMP_X boost flag
         */
        max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35));

        if (chan_amplitude > 100) {
                /* It is not possible to express values (100 < x < 130) */
                chan_amplitude = max(30U, chan_amplitude - 100);
                chan_config |= MAX9286_REV_AMP_X;
        }
        max9286_write(priv, 0x3b, chan_config | MAX9286_REV_AMP(chan_amplitude));
        usleep_range(2000, 2500);
}

/*
 * max9286_check_video_links() - Make sure video links are detected and locked
 *
 * Performs safety checks on video link status. Make sure they are detected
 * and all enabled links are locked.
 *
 * Returns 0 for success, -EIO for errors.
 */
static int max9286_check_video_links(struct max9286_priv *priv)
{
        unsigned int i;
        int ret;

        /*
         * Make sure valid video links are detected.
         * The delay is not characterized in de-serializer manual, wait up
         * to 5 ms.
         */
        for (i = 0; i < 10; i++) {
                ret = max9286_read(priv, 0x49);
                if (ret < 0)
                        return -EIO;

                if ((ret & MAX9286_VIDEO_DETECT_MASK) == priv->source_mask)
                        break;

                usleep_range(350, 500);
        }

        if (i == 10) {
                dev_err(&priv->client->dev,
                        "Unable to detect video links: 0x%02x\n", ret);
                return -EIO;
        }

        /* Make sure all enabled links are locked (4ms max). */
        for (i = 0; i < 10; i++) {
                ret = max9286_read(priv, 0x27);
                if (ret < 0)
                        return -EIO;

                if (ret & MAX9286_LOCKED)
                        break;

                usleep_range(350, 450);
        }

        if (i == 10) {
                dev_err(&priv->client->dev, "Not all enabled links locked\n");
                return -EIO;
        }

        return 0;
}

/*
 * max9286_check_config_link() - Detect and wait for configuration links
 *
 * Determine if the configuration channel is up and settled for a link.
 *
 * Returns 0 for success, -EIO for errors.
 */
static int max9286_check_config_link(struct max9286_priv *priv,
                                     unsigned int source_mask)
{
        unsigned int conflink_mask = (source_mask & 0x0f) << 4;
        unsigned int i;
        int ret;

        /*
         * Make sure requested configuration links are detected.
         * The delay is not characterized in the chip manual: wait up
         * to 5 milliseconds.
         */
        for (i = 0; i < 10; i++) {
                ret = max9286_read(priv, 0x49);
                if (ret < 0)
                        return -EIO;

                ret &= 0xf0;
                if (ret == conflink_mask)
                        break;

                usleep_range(350, 500);
        }

        if (ret != conflink_mask) {
                dev_err(&priv->client->dev,
                        "Unable to detect configuration links: 0x%02x expected 0x%02x\n",
                        ret, conflink_mask);
                return -EIO;
        }

        dev_info(&priv->client->dev,
                 "Successfully detected configuration links after %u loops: 0x%02x\n",
                 i, conflink_mask);

        return 0;
}

static void max9286_set_video_format(struct max9286_priv *priv,
                                     const struct v4l2_mbus_framefmt *format)
{
        const struct max9286_format_info *info = NULL;
        unsigned int i;

        for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) {
                if (max9286_formats[i].code == format->code) {
                        info = &max9286_formats[i];
                        break;
                }
        }

        if (WARN_ON(!info))
                return;

        /*
         * Video format setup: disable CSI output, set VC according to Link
         * number, enable I2C clock stretching when CCBSY is low, enable CCBSY
         * in external GPI-to-GPO mode.
         */
        max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_EN_CCBSYB_CLK_STR |
                      MAX9286_EN_GPI_CCBSYB);

        /* Enable CSI-2 Lane D0-D3 only, DBL mode. */
        max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL |
                      MAX9286_CSILANECNT(priv->csi2_data_lanes) |
                      info->datatype);

        /*
         * Enable HS/VS encoding, use HS as line valid source, use D14/15 for
         * HS/VS, invert VS.
         */
        max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_DESEL |
                      MAX9286_INVVS | MAX9286_HVSRC_D14);
}

static void max9286_set_fsync_period(struct max9286_priv *priv,
                                     struct v4l2_subdev_state *state)
{
        const struct v4l2_fract *interval;
        u32 fsync;

        interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
        if (!interval->numerator || !interval->denominator) {
                /*
                 * Special case, a null interval enables automatic FRAMESYNC
                 * mode. FRAMESYNC is taken from the slowest link.
                 */
                max9286_write(priv, 0x01, MAX9286_FSYNCMODE_INT_HIZ |
                              MAX9286_FSYNCMETH_AUTO);
                return;
        }

        /*
         * Manual FRAMESYNC
         *
         * The FRAMESYNC generator is configured with a period expressed as a
         * number of PCLK periods.
         */
        fsync = div_u64((u64)priv->pixelrate * interval->numerator,
                        interval->denominator);

        dev_dbg(&priv->client->dev, "fsync period %u (pclk %u)\n", fsync,
                priv->pixelrate);

        max9286_write(priv, 0x01, MAX9286_FSYNCMODE_INT_OUT |
                      MAX9286_FSYNCMETH_MANUAL);

        max9286_write(priv, 0x06, (fsync >> 0) & 0xff);
        max9286_write(priv, 0x07, (fsync >> 8) & 0xff);
        max9286_write(priv, 0x08, (fsync >> 16) & 0xff);
}

/* -----------------------------------------------------------------------------
 * V4L2 Subdev
 */

static int max9286_set_pixelrate(struct max9286_priv *priv)
{
        struct max9286_source *source = NULL;
        u64 pixelrate = 0;

        for_each_source(priv, source) {
                struct v4l2_ctrl *ctrl;
                u64 source_rate = 0;

                /* Pixel rate is mandatory to be reported by sources. */
                ctrl = v4l2_ctrl_find(source->sd->ctrl_handler,
                                      V4L2_CID_PIXEL_RATE);
                if (!ctrl) {
                        pixelrate = 0;
                        break;
                }

                /* All source must report the same pixel rate. */
                source_rate = v4l2_ctrl_g_ctrl_int64(ctrl);
                if (!pixelrate) {
                        pixelrate = source_rate;
                } else if (pixelrate != source_rate) {
                        dev_err(&priv->client->dev,
                                "Unable to calculate pixel rate\n");
                        return -EINVAL;
                }
        }

        if (!pixelrate) {
                dev_err(&priv->client->dev,
                        "No pixel rate control available in sources\n");
                return -EINVAL;
        }

        priv->pixelrate = pixelrate;

        /*
         * The CSI-2 transmitter pixel rate is the single source rate multiplied
         * by the number of available sources.
         */
        return v4l2_ctrl_s_ctrl_int64(priv->pixelrate_ctrl,
                                      pixelrate * priv->nsources);
}

static int max9286_notify_bound(struct v4l2_async_notifier *notifier,
                                struct v4l2_subdev *subdev,
                                struct v4l2_async_connection *asd)
{
        struct max9286_priv *priv = sd_to_max9286(notifier->sd);
        struct max9286_source *source = to_max9286_asd(asd)->source;
        unsigned int index = to_index(priv, source);
        unsigned int src_pad;
        int ret;

        ret = media_entity_get_fwnode_pad(&subdev->entity,
                                          source->fwnode,
                                          MEDIA_PAD_FL_SOURCE);
        if (ret < 0) {
                dev_err(&priv->client->dev,
                        "Failed to find pad for %s\n", subdev->name);
                return ret;
        }

        priv->bound_sources |= BIT(index);
        source->sd = subdev;
        src_pad = ret;

        ret = media_create_pad_link(&source->sd->entity, src_pad,
                                    &priv->sd.entity, index,
                                    MEDIA_LNK_FL_ENABLED |
                                    MEDIA_LNK_FL_IMMUTABLE);
        if (ret) {
                dev_err(&priv->client->dev,
                        "Unable to link %s:%u -> %s:%u\n",
                        source->sd->name, src_pad, priv->sd.name, index);
                return ret;
        }

        dev_dbg(&priv->client->dev, "Bound %s pad: %u on index %u\n",
                subdev->name, src_pad, index);

        /*
         * As we register a subdev notifiers we won't get a .complete() callback
         * here, so we have to use bound_sources to identify when all remote
         * serializers have probed.
         */
        if (priv->bound_sources != priv->source_mask)
                return 0;

        /*
         * All enabled sources have probed and enabled their reverse control
         * channels:
         *
         * - Increase the reverse channel amplitude to compensate for the
         *   remote ends high threshold
         * - Verify all configuration links are properly detected
         * - Disable auto-ack as communication on the control channel are now
         *   stable.
         */
        max9286_reverse_channel_setup(priv, MAX9286_REV_AMP_HIGH);
        max9286_check_config_link(priv, priv->source_mask);
        max9286_configure_i2c(priv, false);

        return max9286_set_pixelrate(priv);
}

static void max9286_notify_unbind(struct v4l2_async_notifier *notifier,
                                  struct v4l2_subdev *subdev,
                                  struct v4l2_async_connection *asd)
{
        struct max9286_priv *priv = sd_to_max9286(notifier->sd);
        struct max9286_source *source = to_max9286_asd(asd)->source;
        unsigned int index = to_index(priv, source);

        source->sd = NULL;
        priv->bound_sources &= ~BIT(index);
}

static const struct v4l2_async_notifier_operations max9286_notify_ops = {
        .bound = max9286_notify_bound,
        .unbind = max9286_notify_unbind,
};

static int max9286_v4l2_notifier_register(struct max9286_priv *priv)
{
        struct device *dev = &priv->client->dev;
        struct max9286_source *source = NULL;
        int ret;

        if (!priv->nsources)
                return 0;

        v4l2_async_subdev_nf_init(&priv->notifier, &priv->sd);

        for_each_source(priv, source) {
                unsigned int i = to_index(priv, source);
                struct max9286_asd *mas;

                mas = v4l2_async_nf_add_fwnode(&priv->notifier, source->fwnode,
                                               struct max9286_asd);
                if (IS_ERR(mas)) {
                        dev_err(dev, "Failed to add subdev for source %u: %ld",
                                i, PTR_ERR(mas));
                        v4l2_async_nf_cleanup(&priv->notifier);
                        return PTR_ERR(mas);
                }

                mas->source = source;
        }

        priv->notifier.ops = &max9286_notify_ops;

        ret = v4l2_async_nf_register(&priv->notifier);
        if (ret) {
                dev_err(dev, "Failed to register subdev_notifier");
                v4l2_async_nf_cleanup(&priv->notifier);
                return ret;
        }

        return 0;
}

static void max9286_v4l2_notifier_unregister(struct max9286_priv *priv)
{
        if (!priv->nsources)
                return;

        v4l2_async_nf_unregister(&priv->notifier);
        v4l2_async_nf_cleanup(&priv->notifier);
}

static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
{
        struct max9286_priv *priv = sd_to_max9286(sd);
        struct v4l2_subdev_state *state;
        struct max9286_source *source;
        unsigned int i;
        bool sync = false;
        int ret = 0;

        state = v4l2_subdev_lock_and_get_active_state(sd);

        if (enable) {
                const struct v4l2_mbus_framefmt *format;

                /*
                 * Get the format from the source pad, as all formats must be
                 * identical.
                 */
                format = v4l2_subdev_state_get_format(state, MAX9286_SRC_PAD);

                max9286_set_video_format(priv, format);
                max9286_set_fsync_period(priv, state);

                /*
                 * The frame sync between cameras is transmitted across the
                 * reverse channel as GPIO. We must open all channels while
                 * streaming to allow this synchronisation signal to be shared.
                 */
                max9286_i2c_mux_open(priv);

                /* Start all cameras. */
                for_each_source(priv, source) {
                        ret = v4l2_subdev_call(source->sd, video, s_stream, 1);
                        if (ret)
                                goto unlock;
                }

                ret = max9286_check_video_links(priv);
                if (ret)
                        goto unlock;

                /*
                 * Wait until frame synchronization is locked.
                 *
                 * Manual says frame sync locking should take ~6 VTS.
                 * From practical experience at least 8 are required. Give
                 * 12 complete frames time (~400ms at 30 fps) to achieve frame
                 * locking before returning error.
                 */
                for (i = 0; i < 40; i++) {
                        if (max9286_read(priv, 0x31) & MAX9286_FSYNC_LOCKED) {
                                sync = true;
                                break;
                        }
                        usleep_range(9000, 11000);
                }

                if (!sync) {
                        dev_err(&priv->client->dev,
                                "Failed to get frame synchronization\n");
                        ret = -EXDEV; /* Invalid cross-device link */
                        goto unlock;
                }

                /*
                 * Configure the CSI-2 output to line interleaved mode (W x (N
                 * x H), as opposed to the (N x W) x H mode that outputs the
                 * images stitched side-by-side) and enable it.
                 */
                max9286_write(priv, 0x15, MAX9286_CSI_IMAGE_TYP | MAX9286_VCTYPE |
                              MAX9286_CSIOUTEN | MAX9286_EN_CCBSYB_CLK_STR |
                              MAX9286_EN_GPI_CCBSYB);
        } else {
                max9286_write(priv, 0x15, MAX9286_VCTYPE |
                              MAX9286_EN_CCBSYB_CLK_STR |
                              MAX9286_EN_GPI_CCBSYB);

                /* Stop all cameras. */
                for_each_source(priv, source)
                        v4l2_subdev_call(source->sd, video, s_stream, 0);

                max9286_i2c_mux_close(priv);
        }

unlock:
        v4l2_subdev_unlock_state(state);

        return ret;
}

static int max9286_get_frame_interval(struct v4l2_subdev *sd,
                                      struct v4l2_subdev_state *sd_state,
                                      struct v4l2_subdev_frame_interval *interval)
{
        if (interval->pad != MAX9286_SRC_PAD)
                return -EINVAL;

        interval->interval = *v4l2_subdev_state_get_interval(sd_state,
                                                             interval->pad);

        return 0;
}

static int max9286_set_frame_interval(struct v4l2_subdev *sd,
                                      struct v4l2_subdev_state *sd_state,
                                      struct v4l2_subdev_frame_interval *interval)
{
        if (interval->pad != MAX9286_SRC_PAD)
                return -EINVAL;

        *v4l2_subdev_state_get_interval(sd_state,
                                        interval->pad) = interval->interval;

        return 0;
}

static int max9286_enum_mbus_code(struct v4l2_subdev *sd,
                                  struct v4l2_subdev_state *sd_state,
                                  struct v4l2_subdev_mbus_code_enum *code)
{
        if (code->pad || code->index >= ARRAY_SIZE(max9286_formats))
                return -EINVAL;

        code->code = max9286_formats[code->index].code;

        return 0;
}

static int max9286_set_fmt(struct v4l2_subdev *sd,
                           struct v4l2_subdev_state *state,
                           struct v4l2_subdev_format *format)
{
        struct max9286_priv *priv = sd_to_max9286(sd);
        struct max9286_source *source;
        unsigned int i;

        /*
         * Disable setting format on the source pad: format is propagated
         * from the sinks.
         */
        if (format->pad == MAX9286_SRC_PAD)
                return v4l2_subdev_get_fmt(sd, state, format);

        /* Validate the format. */
        for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) {
                if (max9286_formats[i].code == format->format.code)
                        break;
        }

        if (i == ARRAY_SIZE(max9286_formats))
                format->format.code = max9286_formats[0].code;

        /*
         * Apply the same format on all the other pad as all links must have the
         * same format.
         */
        for_each_source(priv, source) {
                unsigned int index = to_index(priv, source);

                *v4l2_subdev_state_get_format(state, index) = format->format;
        }

        *v4l2_subdev_state_get_format(state, MAX9286_SRC_PAD) = format->format;

        return 0;
}

static const struct v4l2_subdev_video_ops max9286_video_ops = {
        .s_stream       = max9286_s_stream,
};

static const struct v4l2_subdev_pad_ops max9286_pad_ops = {
        .enum_mbus_code = max9286_enum_mbus_code,
        .get_fmt        = v4l2_subdev_get_fmt,
        .set_fmt        = max9286_set_fmt,
        .get_frame_interval = max9286_get_frame_interval,
        .set_frame_interval = max9286_set_frame_interval,
};

static const struct v4l2_subdev_ops max9286_subdev_ops = {
        .video          = &max9286_video_ops,
        .pad            = &max9286_pad_ops,
};

static const struct v4l2_mbus_framefmt max9286_default_format = {
        .width          = 1280,
        .height         = 800,
        .code           = MEDIA_BUS_FMT_UYVY8_1X16,
        .colorspace     = V4L2_COLORSPACE_SRGB,
        .field          = V4L2_FIELD_NONE,
        .ycbcr_enc      = V4L2_YCBCR_ENC_DEFAULT,
        .quantization   = V4L2_QUANTIZATION_DEFAULT,
        .xfer_func      = V4L2_XFER_FUNC_DEFAULT,
};

static int max9286_init_state(struct v4l2_subdev *sd,
                              struct v4l2_subdev_state *state)
{
        struct v4l2_fract *interval;

        for (unsigned int i = 0; i < MAX9286_N_PADS; i++)
                *v4l2_subdev_state_get_format(state, i) = max9286_default_format;

        /*
         * Special case: a null interval enables automatic FRAMESYNC mode.
         *
         * FRAMESYNC is taken from the slowest link. See register 0x01
         * configuration.
         */
        interval = v4l2_subdev_state_get_interval(state, MAX9286_SRC_PAD);
        interval->numerator = 0;
        interval->denominator = 0;

        return 0;
}

static const struct v4l2_subdev_internal_ops max9286_subdev_internal_ops = {
        .init_state = max9286_init_state,
};

static const struct media_entity_operations max9286_media_ops = {
        .link_validate = v4l2_subdev_link_validate
};

static int max9286_s_ctrl(struct v4l2_ctrl *ctrl)
{
        switch (ctrl->id) {
        case V4L2_CID_PIXEL_RATE:
                return 0;
        default:
                return -EINVAL;
        }
}

static const struct v4l2_ctrl_ops max9286_ctrl_ops = {
        .s_ctrl = max9286_s_ctrl,
};

static int max9286_v4l2_register(struct max9286_priv *priv)
{
        struct device *dev = &priv->client->dev;
        int ret;
        int i;

        /* Register v4l2 async notifiers for connected Camera subdevices */
        ret = max9286_v4l2_notifier_register(priv);
        if (ret) {
                dev_err(dev, "Unable to register V4L2 async notifiers\n");
                return ret;
        }

        /* Configure V4L2 for the MAX9286 itself */
        v4l2_i2c_subdev_init(&priv->sd, priv->client, &max9286_subdev_ops);
        priv->sd.internal_ops = &max9286_subdev_internal_ops;
        priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;

        v4l2_ctrl_handler_init(&priv->ctrls, 1);
        priv->pixelrate_ctrl = v4l2_ctrl_new_std(&priv->ctrls,
                                                 &max9286_ctrl_ops,
                                                 V4L2_CID_PIXEL_RATE,
                                                 1, INT_MAX, 1, 50000000);

        priv->sd.ctrl_handler = &priv->ctrls;
        ret = priv->ctrls.error;
        if (ret)
                goto err_async;

        priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
        priv->sd.entity.ops = &max9286_media_ops;

        priv->pads[MAX9286_SRC_PAD].flags = MEDIA_PAD_FL_SOURCE;
        for (i = 0; i < MAX9286_SRC_PAD; i++)
                priv->pads[i].flags = MEDIA_PAD_FL_SINK;
        ret = media_entity_pads_init(&priv->sd.entity, MAX9286_N_PADS,
                                     priv->pads);
        if (ret)
                goto err_async;

        priv->sd.state_lock = priv->ctrls.lock;
        ret = v4l2_subdev_init_finalize(&priv->sd);
        if (ret)
                goto err_async;

        ret = v4l2_async_register_subdev(&priv->sd);
        if (ret < 0) {
                dev_err(dev, "Unable to register subdevice\n");
                goto err_subdev;
        }

        return 0;

err_subdev:
        v4l2_subdev_cleanup(&priv->sd);
err_async:
        v4l2_ctrl_handler_free(&priv->ctrls);
        max9286_v4l2_notifier_unregister(priv);

        return ret;
}

static void max9286_v4l2_unregister(struct max9286_priv *priv)
{
        v4l2_subdev_cleanup(&priv->sd);
        v4l2_ctrl_handler_free(&priv->ctrls);
        v4l2_async_unregister_subdev(&priv->sd);
        max9286_v4l2_notifier_unregister(priv);
}

/* -----------------------------------------------------------------------------
 * Probe/Remove
 */

static int max9286_setup(struct max9286_priv *priv)
{
        /*
         * Link ordering values for all enabled links combinations. Orders must
         * be assigned sequentially from 0 to the number of enabled links
         * without leaving any hole for disabled links. We thus assign orders to
         * enabled links first, and use the remaining order values for disabled
         * links are all links must have a different order value;
         */
        static const u8 link_order[] = {
                (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xxxx */
                (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xxx0 */
                (3 << 6) | (2 << 4) | (0 << 2) | (1 << 0), /* xx0x */
                (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xx10 */
                (3 << 6) | (0 << 4) | (2 << 2) | (1 << 0), /* x0xx */
                (3 << 6) | (1 << 4) | (2 << 2) | (0 << 0), /* x1x0 */
                (3 << 6) | (1 << 4) | (0 << 2) | (2 << 0), /* x10x */
                (3 << 6) | (1 << 4) | (1 << 2) | (0 << 0), /* x210 */
                (0 << 6) | (3 << 4) | (2 << 2) | (1 << 0), /* 0xxx */
                (1 << 6) | (3 << 4) | (2 << 2) | (0 << 0), /* 1xx0 */
                (1 << 6) | (3 << 4) | (0 << 2) | (2 << 0), /* 1x0x */
                (2 << 6) | (3 << 4) | (1 << 2) | (0 << 0), /* 2x10 */
                (1 << 6) | (0 << 4) | (3 << 2) | (2 << 0), /* 10xx */
                (2 << 6) | (1 << 4) | (3 << 2) | (0 << 0), /* 21x0 */
                (2 << 6) | (1 << 4) | (0 << 2) | (3 << 0), /* 210x */
                (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* 3210 */
        };
        int cfg;

        /*
         * Set the I2C bus speed.
         *
         * Enable I2C Local Acknowledge during the probe sequences of the camera
         * only. This should be disabled after the mux is initialised.
         */
        max9286_configure_i2c(priv, true);
        max9286_reverse_channel_setup(priv, priv->init_rev_chan_mv);

        /*
         * Enable GMSL links, mask unused ones and autodetect link
         * used as CSI clock source.
         */
        max9286_write(priv, 0x00, MAX9286_MSTLINKSEL_AUTO | priv->route_mask);
        max9286_write(priv, 0x0b, link_order[priv->route_mask]);
        max9286_write(priv, 0x69, (0xf & ~priv->route_mask));

        max9286_set_video_format(priv, &max9286_default_format);

        cfg = max9286_read(priv, 0x1c);
        if (cfg < 0)
                return cfg;

        dev_dbg(&priv->client->dev, "power-up config: %s immunity, %u-bit bus\n",
                cfg & MAX9286_HIGHIMM(0) ? "high" : "legacy",
                cfg & MAX9286_BWS ? 32 : cfg & MAX9286_HIBW ? 27 : 24);

        if (priv->bus_width) {
                cfg &= ~(MAX9286_HIBW | MAX9286_BWS);

                if (priv->bus_width == 27)
                        cfg |= MAX9286_HIBW;
                else if (priv->bus_width == 32)
                        cfg |= MAX9286_BWS;

                max9286_write(priv, 0x1c, cfg);
        }

        /*
         * The overlap window seems to provide additional validation by tracking
         * the delay between vsync and frame sync, generating an error if the
         * delay is bigger than the programmed window, though it's not yet clear
         * what value should be set.
         *
         * As it's an optional value and can be disabled, we do so by setting
         * a 0 overlap value.
         */
        max9286_write(priv, 0x63, 0);
        max9286_write(priv, 0x64, 0);

        /*
         * Wait for 2ms to allow the link to resynchronize after the
         * configuration change.
         */
        usleep_range(2000, 5000);

        return 0;
}

static int max9286_gpio_set(struct max9286_priv *priv, unsigned int offset,
                            int value)
{
        if (value)
                priv->gpio_state |= BIT(offset);
        else
                priv->gpio_state &= ~BIT(offset);

        return max9286_write(priv, 0x0f,
                             MAX9286_0X0F_RESERVED | priv->gpio_state);
}

static void max9286_gpiochip_set(struct gpio_chip *chip,
                                 unsigned int offset, int value)
{
        struct max9286_priv *priv = gpiochip_get_data(chip);

        max9286_gpio_set(priv, offset, value);
}

static int max9286_gpiochip_get(struct gpio_chip *chip, unsigned int offset)
{
        struct max9286_priv *priv = gpiochip_get_data(chip);

        return priv->gpio_state & BIT(offset);
}

static int max9286_register_gpio(struct max9286_priv *priv)
{
        struct device *dev = &priv->client->dev;
        struct gpio_chip *gpio = &priv->gpio;
        int ret;

        /* Configure the GPIO */
        gpio->label = dev_name(dev);
        gpio->parent = dev;
        gpio->owner = THIS_MODULE;
        gpio->ngpio = 2;
        gpio->base = -1;
        gpio->set = max9286_gpiochip_set;
        gpio->get = max9286_gpiochip_get;
        gpio->can_sleep = true;

        ret = devm_gpiochip_add_data(dev, gpio, priv);
        if (ret)
                dev_err(dev, "Unable to create gpio_chip\n");

        return ret;
}

static int max9286_parse_gpios(struct max9286_priv *priv)
{
        struct device *dev = &priv->client->dev;
        int ret;

        /*
         * Parse the "gpio-poc" vendor property. If the property is not
         * specified the camera power is controlled by a regulator.
         */
        ret = of_property_read_u32_array(dev->of_node, "maxim,gpio-poc",
                                         priv->gpio_poc, 2);
        if (ret == -EINVAL) {
                /*
                 * If gpio lines are not used for the camera power, register
                 * a gpio controller for consumers.
                 */
                return max9286_register_gpio(priv);
        }

        /* If the property is specified make sure it is well formed. */
        if (ret || priv->gpio_poc[0] > 1 ||
            (priv->gpio_poc[1] != GPIO_ACTIVE_HIGH &&
             priv->gpio_poc[1] != GPIO_ACTIVE_LOW)) {
                dev_err(dev, "Invalid 'gpio-poc' property\n");
                return -EINVAL;
        }

        priv->use_gpio_poc = true;
        return 0;
}

static int max9286_poc_power_on(struct max9286_priv *priv)
{
        struct max9286_source *source;
        unsigned int enabled = 0;
        int ret;

        /* Enable the global regulator if available. */
        if (priv->regulator)
                return regulator_enable(priv->regulator);

        if (priv->use_gpio_poc)
                return max9286_gpio_set(priv, priv->gpio_poc[0],
                                        !priv->gpio_poc[1]);

        /* Otherwise use the per-port regulators. */
        for_each_source(priv, source) {
                ret = regulator_enable(source->regulator);
                if (ret < 0)
                        goto error;

                enabled |= BIT(to_index(priv, source));
        }

        return 0;

error:
        for_each_source(priv, source) {
                if (enabled & BIT(to_index(priv, source)))
                        regulator_disable(source->regulator);
        }

        return ret;
}

static int max9286_poc_power_off(struct max9286_priv *priv)
{
        struct max9286_source *source;
        int ret = 0;

        if (priv->regulator)
                return regulator_disable(priv->regulator);

        if (priv->use_gpio_poc)
                return max9286_gpio_set(priv, priv->gpio_poc[0],
                                        priv->gpio_poc[1]);

        for_each_source(priv, source) {
                int err;

                err = regulator_disable(source->regulator);
                if (!ret)
                        ret = err;
        }

        return ret;
}

static int max9286_poc_enable(struct max9286_priv *priv, bool enable)
{
        int ret;

        if (enable)
                ret = max9286_poc_power_on(priv);
        else
                ret = max9286_poc_power_off(priv);

        if (ret < 0)
                dev_err(&priv->client->dev, "Unable to turn power %s\n",
                        enable ? "on" : "off");

        return ret;
}

static int max9286_init(struct max9286_priv *priv)
{
        struct i2c_client *client = priv->client;
        int ret;

        ret = max9286_poc_enable(priv, true);
        if (ret)
                return ret;

        ret = max9286_setup(priv);
        if (ret) {
                dev_err(&client->dev, "Unable to setup max9286\n");
                goto err_poc_disable;
        }

        /*
         * Register all V4L2 interactions for the MAX9286 and notifiers for
         * any subdevices connected.
         */
        ret = max9286_v4l2_register(priv);
        if (ret) {
                dev_err(&client->dev, "Failed to register with V4L2\n");
                goto err_poc_disable;
        }

        ret = max9286_i2c_mux_init(priv);
        if (ret) {
                dev_err(&client->dev, "Unable to initialize I2C multiplexer\n");
                goto err_v4l2_register;
        }

        /* Leave the mux channels disabled until they are selected. */
        max9286_i2c_mux_close(priv);

        return 0;

err_v4l2_register:
        max9286_v4l2_unregister(priv);
err_poc_disable:
        max9286_poc_enable(priv, false);

        return ret;
}

static void max9286_cleanup_dt(struct max9286_priv *priv)
{
        struct max9286_source *source;

        for_each_source(priv, source) {
                fwnode_handle_put(source->fwnode);
                source->fwnode = NULL;
        }
}

static int max9286_parse_dt(struct max9286_priv *priv)
{
        struct device *dev = &priv->client->dev;
        struct device_node *i2c_mux;
        struct device_node *node = NULL;
        unsigned int i2c_mux_mask = 0;
        u32 reverse_channel_microvolt;
        u32 i2c_clk_freq = 105000;
        unsigned int i;

        /* Balance the of_node_put() performed by of_find_node_by_name(). */
        of_node_get(dev->of_node);
        i2c_mux = of_find_node_by_name(dev->of_node, "i2c-mux");
        if (!i2c_mux) {
                dev_err(dev, "Failed to find i2c-mux node\n");
                return -EINVAL;
        }

        /* Identify which i2c-mux channels are enabled */
        for_each_child_of_node(i2c_mux, node) {
                u32 id = 0;

                of_property_read_u32(node, "reg", &id);
                if (id >= MAX9286_NUM_GMSL)
                        continue;

                if (!of_device_is_available(node)) {
                        dev_dbg(dev, "Skipping disabled I2C bus port %u\n", id);
                        continue;
                }

                i2c_mux_mask |= BIT(id);
        }
        of_node_put(i2c_mux);

        /* Parse the endpoints */
        for_each_endpoint_of_node(dev->of_node, node) {
                struct max9286_source *source;
                struct of_endpoint ep;

                of_graph_parse_endpoint(node, &ep);
                dev_dbg(dev, "Endpoint %pOF on port %d",
                        ep.local_node, ep.port);

                if (ep.port > MAX9286_NUM_GMSL) {
                        dev_err(dev, "Invalid endpoint %s on port %d",
                                of_node_full_name(ep.local_node), ep.port);
                        continue;
                }

                /* For the source endpoint just parse the bus configuration. */
                if (ep.port == MAX9286_SRC_PAD) {
                        struct v4l2_fwnode_endpoint vep = {
                                .bus_type = V4L2_MBUS_CSI2_DPHY
                        };
                        int ret;

                        ret = v4l2_fwnode_endpoint_parse(
                                        of_fwnode_handle(node), &vep);
                        if (ret) {
                                of_node_put(node);
                                return ret;
                        }

                        priv->csi2_data_lanes =
                                vep.bus.mipi_csi2.num_data_lanes;

                        continue;
                }

                /* Skip if the corresponding GMSL link is unavailable. */
                if (!(i2c_mux_mask & BIT(ep.port)))
                        continue;

                if (priv->sources[ep.port].fwnode) {
                        dev_err(dev,
                                "Multiple port endpoints are not supported: %d",
                                ep.port);

                        continue;
                }

                source = &priv->sources[ep.port];
                source->fwnode = fwnode_graph_get_remote_endpoint(
                                                of_fwnode_handle(node));
                if (!source->fwnode) {
                        dev_err(dev,
                                "Endpoint %pOF has no remote endpoint connection\n",
                                ep.local_node);

                        continue;
                }

                priv->source_mask |= BIT(ep.port);
                priv->nsources++;
        }

        of_property_read_u32(dev->of_node, "maxim,bus-width", &priv->bus_width);
        switch (priv->bus_width) {
        case 0:
                /*
                 * The property isn't specified in the device tree, the driver
                 * will keep the default value selected by the BWS pin.
                 */
        case 24:
        case 27:
        case 32:
                break;
        default:
                dev_err(dev, "Invalid %s value %u\n", "maxim,bus-width",
                        priv->bus_width);
                return -EINVAL;
        }

        of_property_read_u32(dev->of_node, "maxim,i2c-remote-bus-hz",
                             &i2c_clk_freq);
        for (i = 0; i < ARRAY_SIZE(max9286_i2c_speeds); ++i) {
                const struct max9286_i2c_speed *speed = &max9286_i2c_speeds[i];

                if (speed->rate == i2c_clk_freq) {
                        priv->i2c_mstbt = speed->mstbt;
                        break;
                }
        }

        if (i == ARRAY_SIZE(max9286_i2c_speeds)) {
                dev_err(dev, "Invalid %s value %u\n", "maxim,i2c-remote-bus-hz",
                        i2c_clk_freq);
                return -EINVAL;
        }

        /*
         * Parse the initial value of the reverse channel amplitude from
         * the firmware interface and convert it to millivolts.
         *
         * Default it to 170mV for backward compatibility with DTBs that do not
         * provide the property.
         */
        if (of_property_read_u32(dev->of_node,
                                 "maxim,reverse-channel-microvolt",
                                 &reverse_channel_microvolt))
                priv->init_rev_chan_mv = 170;
        else
                priv->init_rev_chan_mv = reverse_channel_microvolt / 1000U;

        priv->route_mask = priv->source_mask;

        return 0;
}

static int max9286_get_poc_supplies(struct max9286_priv *priv)
{
        struct device *dev = &priv->client->dev;
        struct max9286_source *source;
        int ret;

        /* Start by getting the global regulator. */
        priv->regulator = devm_regulator_get_optional(dev, "poc");
        if (!IS_ERR(priv->regulator))
                return 0;

        if (PTR_ERR(priv->regulator) != -ENODEV)
                return dev_err_probe(dev, PTR_ERR(priv->regulator),
                                     "Unable to get PoC regulator\n");

        /* If there's no global regulator, get per-port regulators. */
        dev_dbg(dev,
                "No global PoC regulator, looking for per-port regulators\n");
        priv->regulator = NULL;

        for_each_source(priv, source) {
                unsigned int index = to_index(priv, source);
                char name[10];

                snprintf(name, sizeof(name), "port%u-poc", index);
                source->regulator = devm_regulator_get(dev, name);
                if (IS_ERR(source->regulator)) {
                        ret = PTR_ERR(source->regulator);
                        dev_err_probe(dev, ret,
                                      "Unable to get port %u PoC regulator\n",
                                      index);
                        return ret;
                }
        }

        return 0;
}

static int max9286_probe(struct i2c_client *client)
{
        struct max9286_priv *priv;
        int ret;

        priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
        if (!priv)
                return -ENOMEM;

        priv->client = client;

        /* GPIO values default to high */
        priv->gpio_state = BIT(0) | BIT(1);

        ret = max9286_parse_dt(priv);
        if (ret)
                goto err_cleanup_dt;

        priv->gpiod_pwdn = devm_gpiod_get_optional(&client->dev, "enable",
                                                   GPIOD_OUT_HIGH);
        if (IS_ERR(priv->gpiod_pwdn)) {
                ret = PTR_ERR(priv->gpiod_pwdn);
                goto err_cleanup_dt;
        }

        gpiod_set_consumer_name(priv->gpiod_pwdn, "max9286-pwdn");
        gpiod_set_value_cansleep(priv->gpiod_pwdn, 1);

        /* Wait at least 4ms before the I2C lines latch to the address */
        if (priv->gpiod_pwdn)
                usleep_range(4000, 5000);

        /*
         * The MAX9286 starts by default with all ports enabled, we disable all
         * ports early to ensure that all channels are disabled if we error out
         * and keep the bus consistent.
         */
        max9286_i2c_mux_close(priv);

        /*
         * The MAX9286 initialises with auto-acknowledge enabled by default.
         * This can be invasive to other transactions on the same bus, so
         * disable it early. It will be enabled only as and when needed.
         */
        max9286_configure_i2c(priv, false);

        ret = max9286_parse_gpios(priv);
        if (ret)
                goto err_powerdown;

        if (!priv->use_gpio_poc) {
                ret = max9286_get_poc_supplies(priv);
                if (ret)
                        goto err_cleanup_dt;
        }

        ret = max9286_init(priv);
        if (ret < 0)
                goto err_cleanup_dt;

        return 0;

err_powerdown:
        gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);
err_cleanup_dt:
        max9286_cleanup_dt(priv);

        return ret;
}

static void max9286_remove(struct i2c_client *client)
{
        struct max9286_priv *priv = sd_to_max9286(i2c_get_clientdata(client));

        i2c_mux_del_adapters(priv->mux);

        max9286_v4l2_unregister(priv);

        max9286_poc_enable(priv, false);

        gpiod_set_value_cansleep(priv->gpiod_pwdn, 0);

        max9286_cleanup_dt(priv);
}

static const struct of_device_id max9286_dt_ids[] = {
        { .compatible = "maxim,max9286" },
        {},
};
MODULE_DEVICE_TABLE(of, max9286_dt_ids);

static struct i2c_driver max9286_i2c_driver = {
        .driver = {
                .name           = "max9286",
                .of_match_table = max9286_dt_ids,
        },
        .probe          = max9286_probe,
        .remove         = max9286_remove,
};

module_i2c_driver(max9286_i2c_driver);

MODULE_DESCRIPTION("Maxim MAX9286 GMSL Deserializer Driver");
MODULE_AUTHOR("Jacopo Mondi, Kieran Bingham, Laurent Pinchart, Niklas Söderlund, Vladimir Barinov");
MODULE_LICENSE("GPL");