1 /* SPDX-License-Identifier: GPL-2.0-or-later */
5 * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
6 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
12 #include <linux/usb/input.h>
13 #include <linux/firmware.h>
14 #include <media/rc-core.h>
15 #include <media/media-device.h>
17 #include <media/dvb_frontend.h>
18 #include <media/dvb_demux.h>
19 #include <media/dvb_net.h>
20 #include <media/dmxdev.h>
21 #include <media/dvb-usb-ids.h>
24 * device file: /dev/dvb/adapter[0-1]/frontend[0-2]
37 * Commonly used variable names:
38 * d = pointer to device (struct dvb_usb_device *)
39 * adap = pointer to adapter (struct dvb_usb_adapter *)
40 * fe = pointer to frontend (struct dvb_frontend *)
42 * Use macros defined in that file to resolve needed pointers.
45 /* helper macros for every DVB USB driver use */
46 #define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \
48 #define adap_to_priv(adap) (adap_to_d(adap)->priv)
49 #define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv))
50 #define fe_to_d(fe) (adap_to_d(fe_to_adap(fe)))
51 #define fe_to_priv(fe) (fe_to_d(fe)->priv)
52 #define d_to_priv(d) (d->priv)
54 #define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \
56 if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
60 dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
61 "%s %*ph\n", __func__, t, r, v & 0xff, v >> 8, \
62 i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \
65 #define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \
68 .endpoint = endpoint_, \
71 .buffersize = size_, \
76 #define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \
79 .endpoint = endpoint_, \
82 .framesperurb = frames_, \
84 .interval = interval_, \
89 #define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \
90 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
92 .idProduct = (prod), \
93 .driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \
99 struct dvb_usb_device
;
100 struct dvb_usb_adapter
;
103 * struct dvb_usb_driver_info - structure for carrying all needed data from the
104 * device driver to the general
107 * @rc_map: name of rc codes table
108 * @props: structure containing all device properties
110 struct dvb_usb_driver_info
{
113 const struct dvb_usb_device_properties
*props
;
117 * struct dvb_usb_rc - structure for remote controller configuration
118 * @map_name: name of rc codes table
119 * @allowed_protos: protocol(s) supported by the driver
120 * @change_protocol: callback to change protocol
121 * @query: called to query an event from the device
122 * @interval: time in ms between two queries
123 * @driver_type: used to point if a device supports raw mode
124 * @bulk_mode: device supports bulk mode for rc (disable polling mode)
125 * @timeout: set to length of last space before raw IR goes idle
128 const char *map_name
;
130 int (*change_protocol
)(struct rc_dev
*dev
, u64
*rc_proto
);
131 int (*query
) (struct dvb_usb_device
*d
);
132 unsigned int interval
;
133 enum rc_driver_type driver_type
;
139 * struct usb_data_stream_properties - usb streaming configuration for adapter
141 * @count: count of used urbs
142 * @endpoint: stream usb endpoint number
143 * @u: union for @bulk and @isoc
145 struct usb_data_stream_properties
{
154 unsigned int buffersize
; /* per URB */
165 * struct dvb_usb_adapter_properties - properties of dvb usb device adapter
166 * @caps: adapter capabilities
167 * @pid_filter_count: pid count of adapter pid-filter
168 * @pid_filter_ctrl: called to enable/disable pid-filter
169 * @pid_filter: called to set/unset pid for filtering
170 * @stream: adapter usb stream configuration
172 struct dvb_usb_adapter_properties
{
173 #define MAX_NO_OF_FE_PER_ADAP 3
174 #define DVB_USB_ADAP_HAS_PID_FILTER 0x01
175 #define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
176 #define DVB_USB_ADAP_NEED_PID_FILTERING 0x04
180 int (*pid_filter_ctrl
) (struct dvb_usb_adapter
*, int);
181 int (*pid_filter
) (struct dvb_usb_adapter
*, int, u16
, int);
183 struct usb_data_stream_properties stream
;
187 * struct dvb_usb_device_properties - properties of a dvb-usb-device
188 * @driver_name: name of the owning driver module
189 * @owner: owner of the dvb_adapter
190 * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro
191 * @bInterfaceNumber: usb interface number driver binds
192 * @size_of_priv: bytes allocated for the driver private data
193 * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent
194 * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for
196 * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message
197 * @probe: like probe on driver model
198 * @disconnect: like disconnect on driver model
199 * @identify_state: called to determine the firmware state (cold or warm) and
200 * return possible firmware file name to be loaded
201 * @firmware: name of the firmware file to be loaded
202 * @download_firmware: called to download the firmware
203 * @i2c_algo: i2c_algorithm if the device has i2c-adapter
204 * @num_adapters: dvb usb device adapter count
205 * @get_adapter_count: called to resolve adapter count
206 * @adapter: array of all adapter properties of device
207 * @power_ctrl: called to enable/disable power of the device
208 * @read_config: called to resolve device configuration
209 * @read_mac_address: called to resolve adapter mac-address
210 * @frontend_attach: called to attach the possible frontends
211 * @frontend_detach: called to detach the possible frontends
212 * @tuner_attach: called to attach the possible tuners
213 * @tuner_detach: called to detach the possible tuners
214 * @frontend_ctrl: called to power on/off active frontend
215 * @streaming_ctrl: called to start/stop the usb streaming of adapter
216 * @init: called after adapters are created in order to finalize device
218 * @exit: called when driver is unloaded
219 * @get_rc_config: called to resolve used remote controller configuration
220 * @get_stream_config: called to resolve input and output stream configuration
221 * of the adapter just before streaming is started. input stream is transport
222 * stream from the demodulator and output stream is usb stream to host.
224 struct dvb_usb_device_properties
{
225 #define MAX_NO_OF_ADAPTER_PER_DEVICE 2
226 const char *driver_name
;
227 struct module
*owner
;
231 unsigned int size_of_priv
;
232 u8 generic_bulk_ctrl_endpoint
;
233 u8 generic_bulk_ctrl_endpoint_response
;
234 unsigned int generic_bulk_ctrl_delay
;
236 int (*probe
)(struct dvb_usb_device
*);
237 void (*disconnect
)(struct dvb_usb_device
*);
240 int (*identify_state
) (struct dvb_usb_device
*, const char **);
241 const char *firmware
;
242 #define RECONNECTS_USB 1
243 int (*download_firmware
) (struct dvb_usb_device
*,
244 const struct firmware
*);
246 struct i2c_algorithm
*i2c_algo
;
248 unsigned int num_adapters
;
249 int (*get_adapter_count
) (struct dvb_usb_device
*);
250 struct dvb_usb_adapter_properties adapter
[MAX_NO_OF_ADAPTER_PER_DEVICE
];
251 int (*power_ctrl
) (struct dvb_usb_device
*, int);
252 int (*read_config
) (struct dvb_usb_device
*d
);
253 int (*read_mac_address
) (struct dvb_usb_adapter
*, u8
[]);
254 int (*frontend_attach
) (struct dvb_usb_adapter
*);
255 int (*frontend_detach
)(struct dvb_usb_adapter
*);
256 int (*tuner_attach
) (struct dvb_usb_adapter
*);
257 int (*tuner_detach
)(struct dvb_usb_adapter
*);
258 int (*frontend_ctrl
) (struct dvb_frontend
*, int);
259 int (*streaming_ctrl
) (struct dvb_frontend
*, int);
260 int (*init
) (struct dvb_usb_device
*);
261 void (*exit
) (struct dvb_usb_device
*);
262 int (*get_rc_config
) (struct dvb_usb_device
*, struct dvb_usb_rc
*);
263 #define DVB_USB_FE_TS_TYPE_188 0
264 #define DVB_USB_FE_TS_TYPE_204 1
265 #define DVB_USB_FE_TS_TYPE_RAW 2
266 int (*get_stream_config
) (struct dvb_frontend
*, u8
*,
267 struct usb_data_stream_properties
*);
271 * struct usb_data_stream - generic object of an usb stream
274 * @state: state of the data stream
275 * @complete: complete callback
276 * @urb_list: list of URBs
277 * @buf_num: number of buffer allocated
278 * @buf_size: size of each buffer in buf_list
279 * @buf_list: array containing all allocate buffers for streaming
280 * @dma_addr: list of dma_addr_t for each buffer in buf_list
282 * @urbs_initialized: number of URBs initialized
283 * @urbs_submitted: number of URBs submitted
284 * @user_priv: private pointer
286 struct usb_data_stream
{
287 #define MAX_NO_URBS_FOR_DATA_STREAM 10
288 struct usb_device
*udev
;
289 struct usb_data_stream_properties props
;
291 #define USB_STATE_INIT 0x00
292 #define USB_STATE_URB_BUF 0x01
295 void (*complete
) (struct usb_data_stream
*, u8
*, size_t);
297 struct urb
*urb_list
[MAX_NO_URBS_FOR_DATA_STREAM
];
299 unsigned long buf_size
;
300 u8
*buf_list
[MAX_NO_URBS_FOR_DATA_STREAM
];
301 dma_addr_t dma_addr
[MAX_NO_URBS_FOR_DATA_STREAM
];
303 int urbs_initialized
;
310 * struct dvb_usb_adapter - dvb adapter object on dvb usb device
311 * @props: pointer to adapter properties
312 * @stream: adapter the usb data stream
313 * @id: index of this adapter (starting with 0)
314 * @ts_type: transport stream, input stream, type
315 * @suspend_resume_active: set when there is ongoing suspend / resume
316 * @pid_filtering: is hardware pid_filtering used or not
317 * @feed_count: current feed count
318 * @max_feed_count: maimum feed count device can handle
319 * @active_fe: active frontend
320 * @state_bits: status bits
321 * @dvb_adap: adapter dvb_adapter
322 * @dmxdev: adapter dmxdev
323 * @demux: adapter software demuxer
324 * @dvb_net: adapter dvb_net interfaces
325 * @fe: adapter frontends
326 * @fe_init: rerouted frontend-init function
327 * @fe_sleep: rerouted frontend-sleep function
329 struct dvb_usb_adapter
{
330 const struct dvb_usb_adapter_properties
*props
;
331 struct usb_data_stream stream
;
334 bool suspend_resume_active
;
341 #define ADAP_STREAMING 2
342 unsigned long state_bits
;
345 struct dvb_adapter dvb_adap
;
346 struct dmxdev dmxdev
;
347 struct dvb_demux demux
;
348 struct dvb_net dvb_net
;
350 struct dvb_frontend
*fe
[MAX_NO_OF_FE_PER_ADAP
];
351 int (*fe_init
[MAX_NO_OF_FE_PER_ADAP
]) (struct dvb_frontend
*);
352 int (*fe_sleep
[MAX_NO_OF_FE_PER_ADAP
]) (struct dvb_frontend
*);
356 * struct dvb_usb_device - dvb usb device object
357 * @props: device properties
359 * @rc_map: name of rc codes table
360 * @rc_polling_active: set when RC polling is active
361 * @intf: pointer to the device's struct usb_interface
362 * @udev: pointer to the device's struct usb_device
363 * @rc: remote controller configuration
364 * @powered: indicated whether the device is power or not
365 * @usb_mutex: mutex for usb control messages
366 * @i2c_mutex: mutex for i2c-transfers
367 * @i2c_adap: device's i2c-adapter
369 * @rc_dev: rc device for the remote control
371 * @rc_query_work: work for polling remote
372 * @priv: private data of the actual driver (allocate by dvb usb, size defined
373 * in size_of_priv of dvb_usb_properties).
375 struct dvb_usb_device
{
376 const struct dvb_usb_device_properties
*props
;
379 bool rc_polling_active
;
380 struct usb_interface
*intf
;
381 struct usb_device
*udev
;
382 struct dvb_usb_rc rc
;
386 struct mutex usb_mutex
;
389 struct mutex i2c_mutex
;
390 struct i2c_adapter i2c_adap
;
392 struct dvb_usb_adapter adapter
[MAX_NO_OF_ADAPTER_PER_DEVICE
];
395 struct rc_dev
*rc_dev
;
397 struct delayed_work rc_query_work
;
402 extern int dvb_usbv2_probe(struct usb_interface
*,
403 const struct usb_device_id
*);
404 extern void dvb_usbv2_disconnect(struct usb_interface
*);
405 extern int dvb_usbv2_suspend(struct usb_interface
*, pm_message_t
);
406 extern int dvb_usbv2_resume(struct usb_interface
*);
407 extern int dvb_usbv2_reset_resume(struct usb_interface
*);
409 /* the generic read/write method for device control */
410 extern int dvb_usbv2_generic_rw(struct dvb_usb_device
*, u8
*, u16
, u8
*, u16
);
411 extern int dvb_usbv2_generic_write(struct dvb_usb_device
*, u8
*, u16
);
412 /* caller must hold lock when locked versions are called */
413 extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device
*,
414 u8
*, u16
, u8
*, u16
);
415 extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device
*, u8
*, u16
);