Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace...
[drm/drm-misc.git] / drivers / mmc / host / sdhci-xenon.h
blob0460d97aad267b6fd3042f10e95a0f0d182634c5
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Copyright (C) 2016 Marvell, All Rights Reserved.
5 * Author: Hu Ziji <huziji@marvell.com>
6 * Date: 2016-8-24
7 */
8 #ifndef SDHCI_XENON_H_
9 #define SDHCI_XENON_H_
11 /* Register Offset of Xenon SDHC self-defined register */
12 #define XENON_SYS_CFG_INFO 0x0104
13 #define XENON_SLOT_TYPE_SDIO_SHIFT 24
14 #define XENON_NR_SUPPORTED_SLOT_MASK 0x7
16 #define XENON_SYS_OP_CTRL 0x0108
17 #define XENON_AUTO_CLKGATE_DISABLE_MASK BIT(20)
18 #define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT 8
19 #define XENON_SLOT_ENABLE_SHIFT 0
21 #define XENON_SYS_EXT_OP_CTRL 0x010C
22 #define XENON_MASK_CMD_CONFLICT_ERR BIT(8)
24 #define XENON_SLOT_OP_STATUS_CTRL 0x0128
25 #define XENON_TUN_CONSECUTIVE_TIMES_SHIFT 16
26 #define XENON_TUN_CONSECUTIVE_TIMES_MASK 0x7
27 #define XENON_TUN_CONSECUTIVE_TIMES 0x4
28 #define XENON_TUNING_STEP_SHIFT 12
29 #define XENON_TUNING_STEP_MASK 0xF
30 #define XENON_TUNING_STEP_DIVIDER BIT(6)
32 #define XENON_SLOT_EMMC_CTRL 0x0130
33 #define XENON_ENABLE_RESP_STROBE BIT(25)
34 #define XENON_ENABLE_DATA_STROBE BIT(24)
36 #define XENON_SLOT_RETUNING_REQ_CTRL 0x0144
37 /* retuning compatible */
38 #define XENON_RETUNING_COMPATIBLE 0x1
40 #define XENON_SLOT_EXT_PRESENT_STATE 0x014C
41 #define XENON_DLL_LOCK_STATE 0x1
43 #define XENON_SLOT_DLL_CUR_DLY_VAL 0x0150
45 /* Tuning Parameter */
46 #define XENON_TMR_RETUN_NO_PRESENT 0xF
47 #define XENON_DEF_TUNING_COUNT 0x9
49 #define XENON_DEFAULT_SDCLK_FREQ 400000
50 #define XENON_LOWEST_SDCLK_FREQ 100000
52 /* Xenon specific Mode Select value */
53 #define XENON_CTRL_HS200 0x5
54 #define XENON_CTRL_HS400 0x6
56 enum xenon_variant {
57 XENON_A3700,
58 XENON_AP806,
59 XENON_AP807,
60 XENON_CP110,
61 XENON_AC5
64 struct xenon_priv {
65 unsigned char tuning_count;
66 /* idx of SDHC */
67 u8 sdhc_id;
70 * eMMC/SD/SDIO require different register settings.
71 * Xenon driver has to recognize card type
72 * before mmc_host->card is not available.
73 * This field records the card type during init.
74 * It is updated in xenon_init_card().
76 * It is only valid during initialization after it is updated.
77 * Do not access this variable in normal transfers after
78 * initialization completes.
80 unsigned int init_card_type;
83 * The bus_width, timing, and clock fields in below
84 * record the current ios setting of Xenon SDHC.
85 * Driver will adjust PHY setting if any change to
86 * ios affects PHY timing.
88 unsigned char bus_width;
89 unsigned char timing;
90 unsigned int clock;
91 struct clk *axi_clk;
93 int phy_type;
95 * Contains board-specific PHY parameters
96 * passed from device tree.
98 void *phy_params;
99 struct xenon_emmc_phy_regs *emmc_phy_regs;
100 bool restore_needed;
101 enum xenon_variant hw_version;
104 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
105 int xenon_phy_parse_params(struct device *dev,
106 struct sdhci_host *host);
107 void xenon_soc_pad_ctrl(struct sdhci_host *host,
108 unsigned char signal_voltage);
109 #endif