Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace...
[drm/drm-misc.git] / drivers / net / phy / open_alliance_helpers.h
blob8b7d97bc6f18615337f6a7b1c0db3a925ba16bcf
1 /* SPDX-License-Identifier: GPL-2.0 */
3 #ifndef OPEN_ALLIANCE_HELPERS_H
4 #define OPEN_ALLIANCE_HELPERS_H
6 /*
7 * These defines reflect the TDR (Time Delay Reflection) diagnostic feature
8 * for 1000BASE-T1 automotive Ethernet PHYs as specified by the OPEN Alliance.
10 * The register values are part of the HDD.TDR register, which provides
11 * information about the cable status and faults. The exact register offset
12 * is device-specific and should be provided by the driver.
14 #define OA_1000BT1_HDD_TDR_ACTIVATION_MASK GENMASK(1, 0)
15 #define OA_1000BT1_HDD_TDR_ACTIVATION_OFF 1
16 #define OA_1000BT1_HDD_TDR_ACTIVATION_ON 2
18 #define OA_1000BT1_HDD_TDR_STATUS_MASK GENMASK(7, 4)
19 #define OA_1000BT1_HDD_TDR_STATUS_SHORT 3
20 #define OA_1000BT1_HDD_TDR_STATUS_OPEN 6
21 #define OA_1000BT1_HDD_TDR_STATUS_NOISE 5
22 #define OA_1000BT1_HDD_TDR_STATUS_CABLE_OK 7
23 #define OA_1000BT1_HDD_TDR_STATUS_TEST_IN_PROGRESS 8
24 #define OA_1000BT1_HDD_TDR_STATUS_TEST_NOT_POSSIBLE 13
27 * OA_1000BT1_HDD_TDR_DISTANCE_MASK:
28 * This mask is used to extract the distance to the first/main fault
29 * detected by the TDR feature. Each bit represents an approximate distance
30 * of 1 meter, ranging from 0 to 31 meters. The exact interpretation of the
31 * bits may vary, but generally:
32 * 000000 = no error
33 * 000001 = error about 0-1m away
34 * 000010 = error between 1-2m away
35 * ...
36 * 011111 = error about 30-31m away
37 * 111111 = resolution not possible / out of distance
39 #define OA_1000BT1_HDD_TDR_DISTANCE_MASK GENMASK(13, 8)
40 #define OA_1000BT1_HDD_TDR_DISTANCE_NO_ERROR 0
41 #define OA_1000BT1_HDD_TDR_DISTANCE_RESOLUTION_NOT_POSSIBLE 0x3f
43 int oa_1000bt1_get_ethtool_cable_result_code(u16 reg_value);
44 int oa_1000bt1_get_tdr_distance(u16 reg_value);
46 #endif /* OPEN_ALLIANCE_HELPERS_H */