1 // SPDX-License-Identifier: GPL-2.0-only
3 * This file contains the handling of command.
4 * It prepares command and sends it to firmware when it is ready.
7 #include <linux/hardirq.h>
8 #include <linux/kfifo.h>
9 #include <linux/sched.h>
10 #include <linux/slab.h>
11 #include <linux/if_arp.h>
12 #include <linux/export.h>
18 #define CAL_NF(nf) ((s32)(-(s32)(nf)))
19 #define CAL_RSSI(snr, nf) ((s32)((s32)(snr) + CAL_NF(nf)))
22 * lbs_cmd_copyback - Simple callback that copies response back into command
24 * @priv: A pointer to &struct lbs_private structure
25 * @extra: A pointer to the original command structure for which
26 * 'resp' is a response
27 * @resp: A pointer to the command response
29 * returns: 0 on success, error on failure
31 int lbs_cmd_copyback(struct lbs_private
*priv
, unsigned long extra
,
32 struct cmd_header
*resp
)
34 struct cmd_header
*buf
= (void *)extra
;
37 copy_len
= min(le16_to_cpu(buf
->size
), le16_to_cpu(resp
->size
));
38 memcpy(buf
, resp
, copy_len
);
41 EXPORT_SYMBOL_GPL(lbs_cmd_copyback
);
44 * lbs_cmd_async_callback - Simple callback that ignores the result.
45 * Use this if you just want to send a command to the hardware, but don't
46 * care for the result.
52 * returns: 0 for success
54 static int lbs_cmd_async_callback(struct lbs_private
*priv
, unsigned long extra
,
55 struct cmd_header
*resp
)
62 * is_command_allowed_in_ps - tests if a command is allowed in Power Save mode
64 * @cmd: the command ID
66 * returns: 1 if allowed, 0 if not allowed
68 static u8
is_command_allowed_in_ps(u16 cmd
)
73 case CMD_802_11_HOST_SLEEP_CFG
:
82 * lbs_update_hw_spec - Updates the hardware details like MAC address
83 * and regulatory region
85 * @priv: A pointer to &struct lbs_private structure
87 * returns: 0 on success, error on failure
89 int lbs_update_hw_spec(struct lbs_private
*priv
)
91 struct cmd_ds_get_hw_spec cmd
;
95 memset(&cmd
, 0, sizeof(cmd
));
96 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
97 memcpy(cmd
.permanentaddr
, priv
->current_addr
, ETH_ALEN
);
98 ret
= lbs_cmd_with_response(priv
, CMD_GET_HW_SPEC
, &cmd
);
102 priv
->fwcapinfo
= le32_to_cpu(cmd
.fwcapinfo
);
104 /* The firmware release is in an interesting format: the patch
105 * level is in the most significant nibble ... so fix that: */
106 priv
->fwrelease
= le32_to_cpu(cmd
.fwrelease
);
107 priv
->fwrelease
= (priv
->fwrelease
<< 8) |
108 (priv
->fwrelease
>> 24 & 0xff);
110 /* Some firmware capabilities:
111 * CF card firmware 5.0.16p0: cap 0x00000303
112 * USB dongle firmware 5.110.17p2: cap 0x00000303
114 netdev_info(priv
->dev
, "%pM, fw %u.%u.%up%u, cap 0x%08x\n",
116 priv
->fwrelease
>> 24 & 0xff,
117 priv
->fwrelease
>> 16 & 0xff,
118 priv
->fwrelease
>> 8 & 0xff,
119 priv
->fwrelease
& 0xff,
121 lbs_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n",
122 cmd
.hwifversion
, cmd
.version
);
124 /* Clamp region code to 8-bit since FW spec indicates that it should
125 * only ever be 8-bit, even though the field size is 16-bit. Some firmware
126 * returns non-zero high 8 bits here.
128 * Firmware version 4.0.102 used in CF8381 has region code shifted. We
129 * need to check for this problem and handle it properly.
131 if (MRVL_FW_MAJOR_REV(priv
->fwrelease
) == MRVL_FW_V4
)
132 priv
->regioncode
= (le16_to_cpu(cmd
.regioncode
) >> 8) & 0xFF;
134 priv
->regioncode
= le16_to_cpu(cmd
.regioncode
) & 0xFF;
136 for (i
= 0; i
< MRVDRV_MAX_REGION_CODE
; i
++) {
137 /* use the region code to search for the index */
138 if (priv
->regioncode
== lbs_region_code_to_index
[i
])
142 /* if it's unidentified region code, use the default (USA) */
143 if (i
>= MRVDRV_MAX_REGION_CODE
) {
144 priv
->regioncode
= 0x10;
145 netdev_info(priv
->dev
,
146 "unidentified region code; using the default (USA)\n");
149 if (priv
->current_addr
[0] == 0xff)
150 memmove(priv
->current_addr
, cmd
.permanentaddr
, ETH_ALEN
);
152 if (!priv
->copied_hwaddr
) {
153 eth_hw_addr_set(priv
->dev
, priv
->current_addr
);
155 eth_hw_addr_set(priv
->mesh_dev
, priv
->current_addr
);
156 priv
->copied_hwaddr
= 1;
163 static int lbs_ret_host_sleep_cfg(struct lbs_private
*priv
, unsigned long dummy
,
164 struct cmd_header
*resp
)
166 if (priv
->is_host_sleep_activated
) {
167 priv
->is_host_sleep_configured
= 0;
168 if (priv
->psstate
== PS_STATE_FULL_POWER
) {
169 priv
->is_host_sleep_activated
= 0;
170 wake_up_interruptible(&priv
->host_sleep_q
);
173 priv
->is_host_sleep_configured
= 1;
179 int lbs_host_sleep_cfg(struct lbs_private
*priv
, uint32_t criteria
,
180 struct wol_config
*p_wol_config
)
182 struct cmd_ds_host_sleep cmd_config
;
186 * Certain firmware versions do not support EHS_REMOVE_WAKEUP command
187 * and the card will return a failure. Since we need to be
188 * able to reset the mask, in those cases we set a 0 mask instead.
190 if (criteria
== EHS_REMOVE_WAKEUP
&& !priv
->ehs_remove_supported
)
193 cmd_config
.hdr
.size
= cpu_to_le16(sizeof(cmd_config
));
194 cmd_config
.criteria
= cpu_to_le32(criteria
);
195 cmd_config
.gpio
= priv
->wol_gpio
;
196 cmd_config
.gap
= priv
->wol_gap
;
198 if (p_wol_config
!= NULL
)
199 memcpy((uint8_t *)&cmd_config
.wol_conf
, (uint8_t *)p_wol_config
,
200 sizeof(struct wol_config
));
202 cmd_config
.wol_conf
.action
= CMD_ACT_ACTION_NONE
;
204 ret
= __lbs_cmd(priv
, CMD_802_11_HOST_SLEEP_CFG
, &cmd_config
.hdr
,
205 le16_to_cpu(cmd_config
.hdr
.size
),
206 lbs_ret_host_sleep_cfg
, 0);
209 memcpy((uint8_t *) p_wol_config
,
210 (uint8_t *)&cmd_config
.wol_conf
,
211 sizeof(struct wol_config
));
213 netdev_info(priv
->dev
, "HOST_SLEEP_CFG failed %d\n", ret
);
218 EXPORT_SYMBOL_GPL(lbs_host_sleep_cfg
);
221 * lbs_set_ps_mode - Sets the Power Save mode
223 * @priv: A pointer to &struct lbs_private structure
224 * @cmd_action: The Power Save operation (PS_MODE_ACTION_ENTER_PS or
225 * PS_MODE_ACTION_EXIT_PS)
226 * @block: Whether to block on a response or not
228 * returns: 0 on success, error on failure
230 int lbs_set_ps_mode(struct lbs_private
*priv
, u16 cmd_action
, bool block
)
232 struct cmd_ds_802_11_ps_mode cmd
;
235 memset(&cmd
, 0, sizeof(cmd
));
236 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
237 cmd
.action
= cpu_to_le16(cmd_action
);
239 if (cmd_action
== PS_MODE_ACTION_ENTER_PS
) {
240 lbs_deb_cmd("PS_MODE: action ENTER_PS\n");
241 cmd
.multipledtim
= cpu_to_le16(1); /* Default DTIM multiple */
242 } else if (cmd_action
== PS_MODE_ACTION_EXIT_PS
) {
243 lbs_deb_cmd("PS_MODE: action EXIT_PS\n");
245 /* We don't handle CONFIRM_SLEEP here because it needs to
246 * be fastpathed to the firmware.
248 lbs_deb_cmd("PS_MODE: unknown action 0x%X\n", cmd_action
);
254 ret
= lbs_cmd_with_response(priv
, CMD_802_11_PS_MODE
, &cmd
);
256 lbs_cmd_async(priv
, CMD_802_11_PS_MODE
, &cmd
.hdr
, sizeof (cmd
));
262 int lbs_cmd_802_11_sleep_params(struct lbs_private
*priv
, uint16_t cmd_action
,
263 struct sleep_params
*sp
)
265 struct cmd_ds_802_11_sleep_params cmd
;
268 if (cmd_action
== CMD_ACT_GET
) {
269 memset(&cmd
, 0, sizeof(cmd
));
271 cmd
.error
= cpu_to_le16(sp
->sp_error
);
272 cmd
.offset
= cpu_to_le16(sp
->sp_offset
);
273 cmd
.stabletime
= cpu_to_le16(sp
->sp_stabletime
);
274 cmd
.calcontrol
= sp
->sp_calcontrol
;
275 cmd
.externalsleepclk
= sp
->sp_extsleepclk
;
276 cmd
.reserved
= cpu_to_le16(sp
->sp_reserved
);
278 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
279 cmd
.action
= cpu_to_le16(cmd_action
);
281 ret
= lbs_cmd_with_response(priv
, CMD_802_11_SLEEP_PARAMS
, &cmd
);
284 lbs_deb_cmd("error 0x%x, offset 0x%x, stabletime 0x%x, "
285 "calcontrol 0x%x extsleepclk 0x%x\n",
286 le16_to_cpu(cmd
.error
), le16_to_cpu(cmd
.offset
),
287 le16_to_cpu(cmd
.stabletime
), cmd
.calcontrol
,
288 cmd
.externalsleepclk
);
290 sp
->sp_error
= le16_to_cpu(cmd
.error
);
291 sp
->sp_offset
= le16_to_cpu(cmd
.offset
);
292 sp
->sp_stabletime
= le16_to_cpu(cmd
.stabletime
);
293 sp
->sp_calcontrol
= cmd
.calcontrol
;
294 sp
->sp_extsleepclk
= cmd
.externalsleepclk
;
295 sp
->sp_reserved
= le16_to_cpu(cmd
.reserved
);
301 static int lbs_wait_for_ds_awake(struct lbs_private
*priv
)
305 if (priv
->is_deep_sleep
) {
306 if (!wait_event_interruptible_timeout(priv
->ds_awake_q
,
307 !priv
->is_deep_sleep
, (10 * HZ
))) {
308 netdev_err(priv
->dev
, "ds_awake_q: timer expired\n");
316 int lbs_set_deep_sleep(struct lbs_private
*priv
, int deep_sleep
)
321 if (priv
->is_deep_sleep
!= 1) {
322 lbs_deb_cmd("deep sleep: sleep\n");
323 BUG_ON(!priv
->enter_deep_sleep
);
324 ret
= priv
->enter_deep_sleep(priv
);
326 netif_stop_queue(priv
->dev
);
327 netif_carrier_off(priv
->dev
);
330 netdev_err(priv
->dev
, "deep sleep: already enabled\n");
333 if (priv
->is_deep_sleep
) {
334 lbs_deb_cmd("deep sleep: wakeup\n");
335 BUG_ON(!priv
->exit_deep_sleep
);
336 ret
= priv
->exit_deep_sleep(priv
);
338 ret
= lbs_wait_for_ds_awake(priv
);
340 netdev_err(priv
->dev
,
341 "deep sleep: wakeup failed\n");
349 static int lbs_ret_host_sleep_activate(struct lbs_private
*priv
,
351 struct cmd_header
*cmd
)
353 priv
->is_host_sleep_activated
= 1;
354 wake_up_interruptible(&priv
->host_sleep_q
);
359 int lbs_set_host_sleep(struct lbs_private
*priv
, int host_sleep
)
361 struct cmd_header cmd
;
363 uint32_t criteria
= EHS_REMOVE_WAKEUP
;
366 if (priv
->is_host_sleep_activated
!= 1) {
367 memset(&cmd
, 0, sizeof(cmd
));
368 ret
= lbs_host_sleep_cfg(priv
, priv
->wol_criteria
,
369 (struct wol_config
*)NULL
);
371 netdev_info(priv
->dev
,
372 "Host sleep configuration failed: %d\n",
376 if (priv
->psstate
== PS_STATE_FULL_POWER
) {
377 ret
= __lbs_cmd(priv
,
378 CMD_802_11_HOST_SLEEP_ACTIVATE
,
381 lbs_ret_host_sleep_activate
, 0);
383 netdev_info(priv
->dev
,
384 "HOST_SLEEP_ACTIVATE failed: %d\n",
388 if (!wait_event_interruptible_timeout(
390 priv
->is_host_sleep_activated
,
392 netdev_err(priv
->dev
,
393 "host_sleep_q: timer expired\n");
397 netdev_err(priv
->dev
, "host sleep: already enabled\n");
400 if (priv
->is_host_sleep_activated
)
401 ret
= lbs_host_sleep_cfg(priv
, criteria
,
402 (struct wol_config
*)NULL
);
409 * lbs_set_snmp_mib - Set an SNMP MIB value
411 * @priv: A pointer to &struct lbs_private structure
412 * @oid: The OID to set in the firmware
413 * @val: Value to set the OID to
415 * returns: 0 on success, error on failure
417 int lbs_set_snmp_mib(struct lbs_private
*priv
, u32 oid
, u16 val
)
419 struct cmd_ds_802_11_snmp_mib cmd
;
422 memset(&cmd
, 0, sizeof (cmd
));
423 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
424 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
425 cmd
.oid
= cpu_to_le16((u16
) oid
);
428 case SNMP_MIB_OID_BSS_TYPE
:
429 cmd
.bufsize
= cpu_to_le16(sizeof(u8
));
432 case SNMP_MIB_OID_11D_ENABLE
:
433 case SNMP_MIB_OID_FRAG_THRESHOLD
:
434 case SNMP_MIB_OID_RTS_THRESHOLD
:
435 case SNMP_MIB_OID_SHORT_RETRY_LIMIT
:
436 case SNMP_MIB_OID_LONG_RETRY_LIMIT
:
437 cmd
.bufsize
= cpu_to_le16(sizeof(u16
));
438 *((__le16
*)(&cmd
.value
)) = cpu_to_le16(val
);
441 lbs_deb_cmd("SNMP_CMD: (set) unhandled OID 0x%x\n", oid
);
446 lbs_deb_cmd("SNMP_CMD: (set) oid 0x%x, oid size 0x%x, value 0x%x\n",
447 le16_to_cpu(cmd
.oid
), le16_to_cpu(cmd
.bufsize
), val
);
449 ret
= lbs_cmd_with_response(priv
, CMD_802_11_SNMP_MIB
, &cmd
);
456 * lbs_get_snmp_mib - Get an SNMP MIB value
458 * @priv: A pointer to &struct lbs_private structure
459 * @oid: The OID to retrieve from the firmware
460 * @out_val: Location for the returned value
462 * returns: 0 on success, error on failure
464 int lbs_get_snmp_mib(struct lbs_private
*priv
, u32 oid
, u16
*out_val
)
466 struct cmd_ds_802_11_snmp_mib cmd
;
469 memset(&cmd
, 0, sizeof (cmd
));
470 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
471 cmd
.action
= cpu_to_le16(CMD_ACT_GET
);
472 cmd
.oid
= cpu_to_le16(oid
);
474 ret
= lbs_cmd_with_response(priv
, CMD_802_11_SNMP_MIB
, &cmd
);
478 switch (le16_to_cpu(cmd
.bufsize
)) {
480 *out_val
= cmd
.value
[0];
483 *out_val
= le16_to_cpu(*((__le16
*)(&cmd
.value
)));
486 lbs_deb_cmd("SNMP_CMD: (get) unhandled OID 0x%x size %d\n",
487 oid
, le16_to_cpu(cmd
.bufsize
));
496 * lbs_get_tx_power - Get the min, max, and current TX power
498 * @priv: A pointer to &struct lbs_private structure
499 * @curlevel: Current power level in dBm
500 * @minlevel: Minimum supported power level in dBm (optional)
501 * @maxlevel: Maximum supported power level in dBm (optional)
503 * returns: 0 on success, error on failure
505 int lbs_get_tx_power(struct lbs_private
*priv
, s16
*curlevel
, s16
*minlevel
,
508 struct cmd_ds_802_11_rf_tx_power cmd
;
511 memset(&cmd
, 0, sizeof(cmd
));
512 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
513 cmd
.action
= cpu_to_le16(CMD_ACT_GET
);
515 ret
= lbs_cmd_with_response(priv
, CMD_802_11_RF_TX_POWER
, &cmd
);
517 *curlevel
= le16_to_cpu(cmd
.curlevel
);
519 *minlevel
= cmd
.minlevel
;
521 *maxlevel
= cmd
.maxlevel
;
528 * lbs_set_tx_power - Set the TX power
530 * @priv: A pointer to &struct lbs_private structure
531 * @dbm: The desired power level in dBm
533 * returns: 0 on success, error on failure
535 int lbs_set_tx_power(struct lbs_private
*priv
, s16 dbm
)
537 struct cmd_ds_802_11_rf_tx_power cmd
;
540 memset(&cmd
, 0, sizeof(cmd
));
541 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
542 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
543 cmd
.curlevel
= cpu_to_le16(dbm
);
545 lbs_deb_cmd("SET_RF_TX_POWER: %d dBm\n", dbm
);
547 ret
= lbs_cmd_with_response(priv
, CMD_802_11_RF_TX_POWER
, &cmd
);
553 * lbs_set_monitor_mode - Enable or disable monitor mode
554 * (only implemented on OLPC usb8388 FW)
556 * @priv: A pointer to &struct lbs_private structure
557 * @enable: 1 to enable monitor mode, 0 to disable
559 * returns: 0 on success, error on failure
561 int lbs_set_monitor_mode(struct lbs_private
*priv
, int enable
)
563 struct cmd_ds_802_11_monitor_mode cmd
;
566 memset(&cmd
, 0, sizeof(cmd
));
567 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
568 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
570 cmd
.mode
= cpu_to_le16(0x1);
572 lbs_deb_cmd("SET_MONITOR_MODE: %d\n", enable
);
574 ret
= lbs_cmd_with_response(priv
, CMD_802_11_MONITOR_MODE
, &cmd
);
576 priv
->dev
->type
= enable
? ARPHRD_IEEE80211_RADIOTAP
:
584 * lbs_get_channel - Get the radio channel
586 * @priv: A pointer to &struct lbs_private structure
588 * returns: The channel on success, error on failure
590 static int lbs_get_channel(struct lbs_private
*priv
)
592 struct cmd_ds_802_11_rf_channel cmd
;
595 memset(&cmd
, 0, sizeof(cmd
));
596 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
597 cmd
.action
= cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_GET
);
599 ret
= lbs_cmd_with_response(priv
, CMD_802_11_RF_CHANNEL
, &cmd
);
603 ret
= le16_to_cpu(cmd
.channel
);
604 lbs_deb_cmd("current radio channel is %d\n", ret
);
610 int lbs_update_channel(struct lbs_private
*priv
)
614 /* the channel in f/w could be out of sync; get the current channel */
615 ret
= lbs_get_channel(priv
);
625 * lbs_set_channel - Set the radio channel
627 * @priv: A pointer to &struct lbs_private structure
628 * @channel: The desired channel, or 0 to clear a locked channel
630 * returns: 0 on success, error on failure
632 int lbs_set_channel(struct lbs_private
*priv
, u8 channel
)
634 struct cmd_ds_802_11_rf_channel cmd
;
636 u8 old_channel
= priv
->channel
;
640 memset(&cmd
, 0, sizeof(cmd
));
641 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
642 cmd
.action
= cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET
);
643 cmd
.channel
= cpu_to_le16(channel
);
645 ret
= lbs_cmd_with_response(priv
, CMD_802_11_RF_CHANNEL
, &cmd
);
649 priv
->channel
= (uint8_t) le16_to_cpu(cmd
.channel
);
650 lbs_deb_cmd("channel switch from %d to %d\n", old_channel
,
658 * lbs_get_rssi - Get current RSSI and noise floor
660 * @priv: A pointer to &struct lbs_private structure
661 * @rssi: On successful return, signal level in mBm
662 * @nf: On successful return, Noise floor
664 * returns: The channel on success, error on failure
666 int lbs_get_rssi(struct lbs_private
*priv
, s8
*rssi
, s8
*nf
)
668 struct cmd_ds_802_11_rssi cmd
;
671 BUG_ON(rssi
== NULL
);
674 memset(&cmd
, 0, sizeof(cmd
));
675 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
676 /* Average SNR over last 8 beacons */
677 cmd
.n_or_snr
= cpu_to_le16(8);
679 ret
= lbs_cmd_with_response(priv
, CMD_802_11_RSSI
, &cmd
);
681 *nf
= CAL_NF(le16_to_cpu(cmd
.nf
));
682 *rssi
= CAL_RSSI(le16_to_cpu(cmd
.n_or_snr
), le16_to_cpu(cmd
.nf
));
689 * lbs_set_11d_domain_info - Send regulatory and 802.11d domain information
692 * @priv: pointer to &struct lbs_private
694 * returns: 0 on success, error code on failure
696 int lbs_set_11d_domain_info(struct lbs_private
*priv
)
698 struct wiphy
*wiphy
= priv
->wdev
->wiphy
;
699 struct ieee80211_supported_band
**bands
= wiphy
->bands
;
700 struct cmd_ds_802_11d_domain_info cmd
;
701 struct mrvl_ie_domain_param_set
*domain
= &cmd
.domain
;
702 struct ieee80211_country_ie_triplet
*t
;
703 enum nl80211_band band
;
704 struct ieee80211_channel
*ch
;
706 u8 num_parsed_chan
= 0;
707 u8 first_channel
= 0, next_chan
= 0, max_pwr
= 0;
712 if (!priv
->country_code
[0])
715 memset(&cmd
, 0, sizeof(cmd
));
716 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
718 lbs_deb_11d("Setting country code '%c%c'\n",
719 priv
->country_code
[0], priv
->country_code
[1]);
721 domain
->header
.type
= cpu_to_le16(TLV_TYPE_DOMAIN
);
723 /* Set country code */
724 domain
->country_code
[0] = priv
->country_code
[0];
725 domain
->country_code
[1] = priv
->country_code
[1];
726 domain
->country_code
[2] = ' ';
728 /* Now set up the channel triplets; firmware is somewhat picky here
729 * and doesn't validate channel numbers and spans; hence it would
730 * interpret a triplet of (36, 4, 20) as channels 36, 37, 38, 39. Since
731 * the last 3 aren't valid channels, the driver is responsible for
732 * splitting that up into 4 triplet pairs of (36, 1, 20) + (40, 1, 20)
736 (band
< NUM_NL80211_BANDS
) && (num_triplet
< MAX_11D_TRIPLETS
);
743 (i
< bands
[band
]->n_channels
) && (num_triplet
< MAX_11D_TRIPLETS
);
745 ch
= &bands
[band
]->channels
[i
];
746 if (ch
->flags
& IEEE80211_CHAN_DISABLED
)
751 next_chan
= first_channel
= (u32
) ch
->hw_value
;
752 max_pwr
= ch
->max_power
;
757 if ((ch
->hw_value
== next_chan
+ 1) &&
758 (ch
->max_power
== max_pwr
)) {
759 /* Consolidate adjacent channels */
763 /* Add this triplet */
764 lbs_deb_11d("11D triplet (%d, %d, %d)\n",
765 first_channel
, num_parsed_chan
,
767 t
= &domain
->triplet
[num_triplet
];
768 t
->chans
.first_channel
= first_channel
;
769 t
->chans
.num_channels
= num_parsed_chan
;
770 t
->chans
.max_power
= max_pwr
;
777 /* Add last triplet */
778 lbs_deb_11d("11D triplet (%d, %d, %d)\n", first_channel
,
779 num_parsed_chan
, max_pwr
);
780 t
= &domain
->triplet
[num_triplet
];
781 t
->chans
.first_channel
= first_channel
;
782 t
->chans
.num_channels
= num_parsed_chan
;
783 t
->chans
.max_power
= max_pwr
;
788 lbs_deb_11d("# triplets %d\n", num_triplet
);
790 /* Set command header sizes */
791 triplet_size
= num_triplet
* sizeof(struct ieee80211_country_ie_triplet
);
792 domain
->header
.len
= cpu_to_le16(sizeof(domain
->country_code
) +
795 lbs_deb_hex(LBS_DEB_11D
, "802.11D domain param set",
796 (u8
*) &cmd
.domain
.country_code
,
797 le16_to_cpu(domain
->header
.len
));
799 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
.hdr
) +
801 sizeof(cmd
.domain
.header
) +
802 sizeof(cmd
.domain
.country_code
) +
805 ret
= lbs_cmd_with_response(priv
, CMD_802_11D_DOMAIN_INFO
, &cmd
);
812 * lbs_get_reg - Read a MAC, Baseband, or RF register
814 * @priv: pointer to &struct lbs_private
815 * @reg: register command, one of CMD_MAC_REG_ACCESS,
816 * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
817 * @offset: byte offset of the register to get
818 * @value: on success, the value of the register at 'offset'
820 * returns: 0 on success, error code on failure
822 int lbs_get_reg(struct lbs_private
*priv
, u16 reg
, u16 offset
, u32
*value
)
824 struct cmd_ds_reg_access cmd
;
827 BUG_ON(value
== NULL
);
829 memset(&cmd
, 0, sizeof(cmd
));
830 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
831 cmd
.action
= cpu_to_le16(CMD_ACT_GET
);
832 cmd
.offset
= cpu_to_le16(offset
);
834 if (reg
!= CMD_MAC_REG_ACCESS
&&
835 reg
!= CMD_BBP_REG_ACCESS
&&
836 reg
!= CMD_RF_REG_ACCESS
) {
841 ret
= lbs_cmd_with_response(priv
, reg
, &cmd
);
843 if (reg
== CMD_BBP_REG_ACCESS
|| reg
== CMD_RF_REG_ACCESS
)
844 *value
= cmd
.value
.bbp_rf
;
845 else if (reg
== CMD_MAC_REG_ACCESS
)
846 *value
= le32_to_cpu(cmd
.value
.mac
);
854 * lbs_set_reg - Write a MAC, Baseband, or RF register
856 * @priv: pointer to &struct lbs_private
857 * @reg: register command, one of CMD_MAC_REG_ACCESS,
858 * CMD_BBP_REG_ACCESS, or CMD_RF_REG_ACCESS
859 * @offset: byte offset of the register to set
860 * @value: the value to write to the register at 'offset'
862 * returns: 0 on success, error code on failure
864 int lbs_set_reg(struct lbs_private
*priv
, u16 reg
, u16 offset
, u32 value
)
866 struct cmd_ds_reg_access cmd
;
869 memset(&cmd
, 0, sizeof(cmd
));
870 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
871 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
872 cmd
.offset
= cpu_to_le16(offset
);
874 if (reg
== CMD_BBP_REG_ACCESS
|| reg
== CMD_RF_REG_ACCESS
)
875 cmd
.value
.bbp_rf
= (u8
) (value
& 0xFF);
876 else if (reg
== CMD_MAC_REG_ACCESS
)
877 cmd
.value
.mac
= cpu_to_le32(value
);
883 ret
= lbs_cmd_with_response(priv
, reg
, &cmd
);
889 static void lbs_queue_cmd(struct lbs_private
*priv
,
890 struct cmd_ctrl_node
*cmdnode
)
896 lbs_deb_host("QUEUE_CMD: cmdnode is NULL\n");
899 if (!cmdnode
->cmdbuf
->size
) {
900 lbs_deb_host("DNLD_CMD: cmd size is zero\n");
905 /* Exit_PS command needs to be queued in the header always. */
906 if (le16_to_cpu(cmdnode
->cmdbuf
->command
) == CMD_802_11_PS_MODE
) {
907 struct cmd_ds_802_11_ps_mode
*psm
= (void *)cmdnode
->cmdbuf
;
909 if (psm
->action
== cpu_to_le16(PS_MODE_ACTION_EXIT_PS
)) {
910 if (priv
->psstate
!= PS_STATE_FULL_POWER
)
915 if (le16_to_cpu(cmdnode
->cmdbuf
->command
) == CMD_802_11_WAKEUP_CONFIRM
)
918 spin_lock_irqsave(&priv
->driver_lock
, flags
);
921 list_add_tail(&cmdnode
->list
, &priv
->cmdpendingq
);
923 list_add(&cmdnode
->list
, &priv
->cmdpendingq
);
925 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
927 lbs_deb_host("QUEUE_CMD: inserted command 0x%04x into cmdpendingq\n",
928 le16_to_cpu(cmdnode
->cmdbuf
->command
));
931 static void lbs_submit_command(struct lbs_private
*priv
,
932 struct cmd_ctrl_node
*cmdnode
)
935 struct cmd_header
*cmd
;
941 cmd
= cmdnode
->cmdbuf
;
943 spin_lock_irqsave(&priv
->driver_lock
, flags
);
945 cmd
->seqnum
= cpu_to_le16(priv
->seqnum
);
946 priv
->cur_cmd
= cmdnode
;
947 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
949 cmdsize
= le16_to_cpu(cmd
->size
);
950 command
= le16_to_cpu(cmd
->command
);
952 /* These commands take longer */
953 if (command
== CMD_802_11_SCAN
|| command
== CMD_802_11_ASSOCIATE
)
956 lbs_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n",
957 command
, le16_to_cpu(cmd
->seqnum
), cmdsize
);
958 lbs_deb_hex(LBS_DEB_CMD
, "DNLD_CMD", (void *) cmdnode
->cmdbuf
, cmdsize
);
960 ret
= priv
->hw_host_to_card(priv
, MVMS_CMD
, (u8
*) cmd
, cmdsize
);
963 netdev_info(priv
->dev
, "DNLD_CMD: hw_host_to_card failed: %d\n",
965 /* Reset dnld state machine, report failure */
966 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
967 lbs_complete_command(priv
, cmdnode
, ret
);
970 if (command
== CMD_802_11_DEEP_SLEEP
) {
971 if (priv
->is_auto_deep_sleep_enabled
) {
972 priv
->wakeup_dev_required
= 1;
975 priv
->is_deep_sleep
= 1;
976 lbs_complete_command(priv
, cmdnode
, 0);
978 /* Setup the timer after transmit command */
979 mod_timer(&priv
->command_timer
, jiffies
+ timeo
);
984 * This function inserts command node to cmdfreeq
985 * after cleans it. Requires priv->driver_lock held.
987 static void __lbs_cleanup_and_insert_cmd(struct lbs_private
*priv
,
988 struct cmd_ctrl_node
*cmdnode
)
993 cmdnode
->callback
= NULL
;
994 cmdnode
->callback_arg
= 0;
996 memset(cmdnode
->cmdbuf
, 0, LBS_CMD_BUFFER_SIZE
);
998 list_add_tail(&cmdnode
->list
, &priv
->cmdfreeq
);
1001 static void lbs_cleanup_and_insert_cmd(struct lbs_private
*priv
,
1002 struct cmd_ctrl_node
*ptempcmd
)
1004 unsigned long flags
;
1006 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1007 __lbs_cleanup_and_insert_cmd(priv
, ptempcmd
);
1008 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1011 void __lbs_complete_command(struct lbs_private
*priv
, struct cmd_ctrl_node
*cmd
,
1015 * Normally, commands are removed from cmdpendingq before being
1016 * submitted. However, we can arrive here on alternative codepaths
1017 * where the command is still pending. Make sure the command really
1018 * isn't part of a list at this point.
1020 list_del_init(&cmd
->list
);
1022 cmd
->result
= result
;
1023 cmd
->cmdwaitqwoken
= 1;
1024 wake_up(&cmd
->cmdwait_q
);
1026 if (!cmd
->callback
|| cmd
->callback
== lbs_cmd_async_callback
)
1027 __lbs_cleanup_and_insert_cmd(priv
, cmd
);
1028 priv
->cur_cmd
= NULL
;
1029 wake_up(&priv
->waitq
);
1032 void lbs_complete_command(struct lbs_private
*priv
, struct cmd_ctrl_node
*cmd
,
1035 unsigned long flags
;
1036 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1037 __lbs_complete_command(priv
, cmd
, result
);
1038 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1041 int lbs_set_radio(struct lbs_private
*priv
, u8 preamble
, u8 radio_on
)
1043 struct cmd_ds_802_11_radio_control cmd
;
1046 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
1047 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
1050 /* Only v8 and below support setting the preamble */
1051 if (priv
->fwrelease
< 0x09000000) {
1053 case RADIO_PREAMBLE_SHORT
:
1054 case RADIO_PREAMBLE_AUTO
:
1055 case RADIO_PREAMBLE_LONG
:
1056 cmd
.control
= cpu_to_le16(preamble
);
1064 cmd
.control
|= cpu_to_le16(0x1);
1066 cmd
.control
&= cpu_to_le16(~0x1);
1067 priv
->txpower_cur
= 0;
1070 lbs_deb_cmd("RADIO_CONTROL: radio %s, preamble %d\n",
1071 radio_on
? "ON" : "OFF", preamble
);
1073 priv
->radio_on
= radio_on
;
1075 ret
= lbs_cmd_with_response(priv
, CMD_802_11_RADIO_CONTROL
, &cmd
);
1081 void lbs_set_mac_control(struct lbs_private
*priv
)
1083 struct cmd_ds_mac_control cmd
;
1085 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
1086 cmd
.action
= cpu_to_le16(priv
->mac_control
);
1089 lbs_cmd_async(priv
, CMD_MAC_CONTROL
, &cmd
.hdr
, sizeof(cmd
));
1092 int lbs_set_mac_control_sync(struct lbs_private
*priv
)
1094 struct cmd_ds_mac_control cmd
;
1097 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
1098 cmd
.action
= cpu_to_le16(priv
->mac_control
);
1100 ret
= lbs_cmd_with_response(priv
, CMD_MAC_CONTROL
, &cmd
);
1106 * lbs_allocate_cmd_buffer - allocates the command buffer and links
1107 * it to command free queue
1109 * @priv: A pointer to &struct lbs_private structure
1111 * returns: 0 for success or -1 on error
1113 int lbs_allocate_cmd_buffer(struct lbs_private
*priv
)
1118 struct cmd_ctrl_node
*cmdarray
;
1120 /* Allocate and initialize the command array */
1121 bufsize
= sizeof(struct cmd_ctrl_node
) * LBS_NUM_CMD_BUFFERS
;
1122 if (!(cmdarray
= kzalloc(bufsize
, GFP_KERNEL
))) {
1123 lbs_deb_host("ALLOC_CMD_BUF: tempcmd_array is NULL\n");
1127 priv
->cmd_array
= cmdarray
;
1129 /* Allocate and initialize each command buffer in the command array */
1130 for (i
= 0; i
< LBS_NUM_CMD_BUFFERS
; i
++) {
1131 cmdarray
[i
].cmdbuf
= kzalloc(LBS_CMD_BUFFER_SIZE
, GFP_KERNEL
);
1132 if (!cmdarray
[i
].cmdbuf
) {
1133 lbs_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n");
1135 goto free_cmd_array
;
1139 for (i
= 0; i
< LBS_NUM_CMD_BUFFERS
; i
++) {
1140 init_waitqueue_head(&cmdarray
[i
].cmdwait_q
);
1141 lbs_cleanup_and_insert_cmd(priv
, &cmdarray
[i
]);
1146 for (i
= 0; i
< LBS_NUM_CMD_BUFFERS
; i
++) {
1147 if (cmdarray
[i
].cmdbuf
) {
1148 kfree(cmdarray
[i
].cmdbuf
);
1149 cmdarray
[i
].cmdbuf
= NULL
;
1152 kfree(priv
->cmd_array
);
1153 priv
->cmd_array
= NULL
;
1159 * lbs_free_cmd_buffer - free the command buffer
1161 * @priv: A pointer to &struct lbs_private structure
1163 * returns: 0 for success
1165 int lbs_free_cmd_buffer(struct lbs_private
*priv
)
1167 struct cmd_ctrl_node
*cmdarray
;
1170 /* need to check if cmd array is allocated or not */
1171 if (priv
->cmd_array
== NULL
) {
1172 lbs_deb_host("FREE_CMD_BUF: cmd_array is NULL\n");
1176 cmdarray
= priv
->cmd_array
;
1178 /* Release shared memory buffers */
1179 for (i
= 0; i
< LBS_NUM_CMD_BUFFERS
; i
++) {
1180 if (cmdarray
[i
].cmdbuf
) {
1181 kfree(cmdarray
[i
].cmdbuf
);
1182 cmdarray
[i
].cmdbuf
= NULL
;
1186 /* Release cmd_ctrl_node */
1187 if (priv
->cmd_array
) {
1188 kfree(priv
->cmd_array
);
1189 priv
->cmd_array
= NULL
;
1197 * lbs_get_free_cmd_node - gets a free command node if available in
1198 * command free queue
1200 * @priv: A pointer to &struct lbs_private structure
1202 * returns: A pointer to &cmd_ctrl_node structure on success
1205 static struct cmd_ctrl_node
*lbs_get_free_cmd_node(struct lbs_private
*priv
)
1207 struct cmd_ctrl_node
*tempnode
;
1208 unsigned long flags
;
1213 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1215 if (!list_empty(&priv
->cmdfreeq
)) {
1216 tempnode
= list_first_entry(&priv
->cmdfreeq
,
1217 struct cmd_ctrl_node
, list
);
1218 list_del_init(&tempnode
->list
);
1220 lbs_deb_host("GET_CMD_NODE: cmd_ctrl_node is not available\n");
1224 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1230 * lbs_execute_next_command - execute next command in command
1231 * pending queue. Will put firmware back to PS mode if applicable.
1233 * @priv: A pointer to &struct lbs_private structure
1235 * returns: 0 on success or -1 on error
1237 int lbs_execute_next_command(struct lbs_private
*priv
)
1239 struct cmd_ctrl_node
*cmdnode
= NULL
;
1240 struct cmd_header
*cmd
;
1241 unsigned long flags
;
1244 /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the
1245 * only caller to us is lbs_thread() and we get even when a
1246 * data packet is received */
1247 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1249 if (priv
->cur_cmd
) {
1250 netdev_alert(priv
->dev
,
1251 "EXEC_NEXT_CMD: already processing command!\n");
1252 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1257 if (!list_empty(&priv
->cmdpendingq
)) {
1258 cmdnode
= list_first_entry(&priv
->cmdpendingq
,
1259 struct cmd_ctrl_node
, list
);
1262 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1265 cmd
= cmdnode
->cmdbuf
;
1267 if (is_command_allowed_in_ps(le16_to_cpu(cmd
->command
))) {
1268 if ((priv
->psstate
== PS_STATE_SLEEP
) ||
1269 (priv
->psstate
== PS_STATE_PRE_SLEEP
)) {
1271 "EXEC_NEXT_CMD: cannot send cmd 0x%04x in psstate %d\n",
1272 le16_to_cpu(cmd
->command
),
1277 lbs_deb_host("EXEC_NEXT_CMD: OK to send command "
1278 "0x%04x in psstate %d\n",
1279 le16_to_cpu(cmd
->command
), priv
->psstate
);
1280 } else if (priv
->psstate
!= PS_STATE_FULL_POWER
) {
1282 * 1. Non-PS command:
1283 * Queue it. set needtowakeup to TRUE if current state
1284 * is SLEEP, otherwise call send EXIT_PS.
1285 * 2. PS command but not EXIT_PS:
1287 * 3. PS command EXIT_PS:
1288 * Set needtowakeup to TRUE if current state is SLEEP,
1289 * otherwise send this command down to firmware
1292 if (cmd
->command
!= cpu_to_le16(CMD_802_11_PS_MODE
)) {
1293 /* Prepare to send Exit PS,
1294 * this non PS command will be sent later */
1295 if ((priv
->psstate
== PS_STATE_SLEEP
)
1296 || (priv
->psstate
== PS_STATE_PRE_SLEEP
)
1298 /* w/ new scheme, it will not reach here.
1299 since it is blocked in main_thread. */
1300 priv
->needtowakeup
= 1;
1302 lbs_set_ps_mode(priv
,
1303 PS_MODE_ACTION_EXIT_PS
,
1311 * PS command. Ignore it if it is not Exit_PS.
1312 * otherwise send it down immediately.
1314 struct cmd_ds_802_11_ps_mode
*psm
= (void *)cmd
;
1317 "EXEC_NEXT_CMD: PS cmd, action 0x%02x\n",
1320 cpu_to_le16(PS_MODE_ACTION_EXIT_PS
)) {
1322 "EXEC_NEXT_CMD: ignore ENTER_PS cmd\n");
1323 lbs_complete_command(priv
, cmdnode
, 0);
1329 if ((priv
->psstate
== PS_STATE_SLEEP
) ||
1330 (priv
->psstate
== PS_STATE_PRE_SLEEP
)) {
1332 "EXEC_NEXT_CMD: ignore EXIT_PS cmd in sleep\n");
1333 lbs_complete_command(priv
, cmdnode
, 0);
1334 priv
->needtowakeup
= 1;
1341 "EXEC_NEXT_CMD: sending EXIT_PS\n");
1344 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1345 list_del_init(&cmdnode
->list
);
1346 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1347 lbs_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n",
1348 le16_to_cpu(cmd
->command
));
1349 lbs_submit_command(priv
, cmdnode
);
1352 * check if in power save mode, if yes, put the device back
1355 if ((priv
->psmode
!= LBS802_11POWERMODECAM
) &&
1356 (priv
->psstate
== PS_STATE_FULL_POWER
) &&
1357 (priv
->connect_status
== LBS_CONNECTED
)) {
1359 "EXEC_NEXT_CMD: cmdpendingq empty, go back to PS_SLEEP");
1360 lbs_set_ps_mode(priv
, PS_MODE_ACTION_ENTER_PS
,
1370 static void lbs_send_confirmsleep(struct lbs_private
*priv
)
1372 unsigned long flags
;
1375 lbs_deb_hex(LBS_DEB_HOST
, "sleep confirm", (u8
*) &confirm_sleep
,
1376 sizeof(confirm_sleep
));
1378 ret
= priv
->hw_host_to_card(priv
, MVMS_CMD
, (u8
*) &confirm_sleep
,
1379 sizeof(confirm_sleep
));
1381 netdev_alert(priv
->dev
, "confirm_sleep failed\n");
1385 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1387 /* We don't get a response on the sleep-confirmation */
1388 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
1390 if (priv
->is_host_sleep_configured
) {
1391 priv
->is_host_sleep_activated
= 1;
1392 wake_up_interruptible(&priv
->host_sleep_q
);
1395 /* If nothing to do, go back to sleep (?) */
1396 if (!kfifo_len(&priv
->event_fifo
) && !priv
->resp_len
[priv
->resp_idx
])
1397 priv
->psstate
= PS_STATE_SLEEP
;
1399 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1403 * lbs_ps_confirm_sleep - checks condition and prepares to
1404 * send sleep confirm command to firmware if ok
1406 * @priv: A pointer to &struct lbs_private structure
1410 void lbs_ps_confirm_sleep(struct lbs_private
*priv
)
1412 unsigned long flags
=0;
1415 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1416 if (priv
->dnld_sent
) {
1418 lbs_deb_host("dnld_sent was set\n");
1421 /* In-progress command? */
1422 if (priv
->cur_cmd
) {
1424 lbs_deb_host("cur_cmd was set\n");
1427 /* Pending events or command responses? */
1428 if (kfifo_len(&priv
->event_fifo
) || priv
->resp_len
[priv
->resp_idx
]) {
1430 lbs_deb_host("pending events or command responses\n");
1432 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1435 lbs_deb_host("sending lbs_ps_confirm_sleep\n");
1436 lbs_send_confirmsleep(priv
);
1438 lbs_deb_host("sleep confirm has been delayed\n");
1444 * lbs_set_tpc_cfg - Configures the transmission power control functionality
1446 * @priv: A pointer to &struct lbs_private structure
1447 * @enable: Transmission power control enable
1448 * @p0: Power level when link quality is good (dBm).
1449 * @p1: Power level when link quality is fair (dBm).
1450 * @p2: Power level when link quality is poor (dBm).
1451 * @usesnr: Use Signal to Noise Ratio in TPC
1453 * returns: 0 on success
1455 int lbs_set_tpc_cfg(struct lbs_private
*priv
, int enable
, int8_t p0
, int8_t p1
,
1456 int8_t p2
, int usesnr
)
1458 struct cmd_ds_802_11_tpc_cfg cmd
;
1461 memset(&cmd
, 0, sizeof(cmd
));
1462 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
1463 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
1464 cmd
.enable
= !!enable
;
1465 cmd
.usesnr
= !!usesnr
;
1470 ret
= lbs_cmd_with_response(priv
, CMD_802_11_TPC_CFG
, &cmd
);
1476 * lbs_set_power_adapt_cfg - Configures the power adaptation settings
1478 * @priv: A pointer to &struct lbs_private structure
1479 * @enable: Power adaptation enable
1480 * @p0: Power level for 1, 2, 5.5 and 11 Mbps (dBm).
1481 * @p1: Power level for 6, 9, 12, 18, 22, 24 and 36 Mbps (dBm).
1482 * @p2: Power level for 48 and 54 Mbps (dBm).
1484 * returns: 0 on Success
1487 int lbs_set_power_adapt_cfg(struct lbs_private
*priv
, int enable
, int8_t p0
,
1488 int8_t p1
, int8_t p2
)
1490 struct cmd_ds_802_11_pa_cfg cmd
;
1493 memset(&cmd
, 0, sizeof(cmd
));
1494 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
1495 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
1496 cmd
.enable
= !!enable
;
1501 ret
= lbs_cmd_with_response(priv
, CMD_802_11_PA_CFG
, &cmd
);
1507 struct cmd_ctrl_node
*__lbs_cmd_async(struct lbs_private
*priv
,
1508 uint16_t command
, struct cmd_header
*in_cmd
, int in_cmd_size
,
1509 int (*callback
)(struct lbs_private
*, unsigned long, struct cmd_header
*),
1510 unsigned long callback_arg
)
1512 struct cmd_ctrl_node
*cmdnode
;
1514 if (priv
->surpriseremoved
) {
1515 lbs_deb_host("PREP_CMD: card removed\n");
1516 cmdnode
= ERR_PTR(-ENOENT
);
1520 /* No commands are allowed in Deep Sleep until we toggle the GPIO
1521 * to wake up the card and it has signaled that it's ready.
1523 if (!priv
->is_auto_deep_sleep_enabled
) {
1524 if (priv
->is_deep_sleep
) {
1525 lbs_deb_cmd("command not allowed in deep sleep\n");
1526 cmdnode
= ERR_PTR(-EBUSY
);
1531 cmdnode
= lbs_get_free_cmd_node(priv
);
1532 if (cmdnode
== NULL
) {
1533 lbs_deb_host("PREP_CMD: cmdnode is NULL\n");
1535 /* Wake up main thread to execute next command */
1536 wake_up(&priv
->waitq
);
1537 cmdnode
= ERR_PTR(-ENOBUFS
);
1541 cmdnode
->callback
= callback
;
1542 cmdnode
->callback_arg
= callback_arg
;
1544 /* Copy the incoming command to the buffer */
1545 memcpy(cmdnode
->cmdbuf
, in_cmd
, in_cmd_size
);
1547 /* Set command, clean result, move to buffer */
1548 cmdnode
->cmdbuf
->command
= cpu_to_le16(command
);
1549 cmdnode
->cmdbuf
->size
= cpu_to_le16(in_cmd_size
);
1550 cmdnode
->cmdbuf
->result
= 0;
1552 lbs_deb_host("PREP_CMD: command 0x%04x\n", command
);
1554 cmdnode
->cmdwaitqwoken
= 0;
1555 lbs_queue_cmd(priv
, cmdnode
);
1556 wake_up(&priv
->waitq
);
1562 void lbs_cmd_async(struct lbs_private
*priv
, uint16_t command
,
1563 struct cmd_header
*in_cmd
, int in_cmd_size
)
1565 __lbs_cmd_async(priv
, command
, in_cmd
, in_cmd_size
,
1566 lbs_cmd_async_callback
, 0);
1569 int __lbs_cmd(struct lbs_private
*priv
, uint16_t command
,
1570 struct cmd_header
*in_cmd
, int in_cmd_size
,
1571 int (*callback
)(struct lbs_private
*, unsigned long, struct cmd_header
*),
1572 unsigned long callback_arg
)
1574 struct cmd_ctrl_node
*cmdnode
;
1575 unsigned long flags
;
1578 cmdnode
= __lbs_cmd_async(priv
, command
, in_cmd
, in_cmd_size
,
1579 callback
, callback_arg
);
1580 if (IS_ERR(cmdnode
)) {
1581 ret
= PTR_ERR(cmdnode
);
1588 * Be careful with signals here. A signal may be received as the system
1589 * goes into suspend or resume. We do not want this to interrupt the
1590 * command, so we perform an uninterruptible sleep.
1592 wait_event(cmdnode
->cmdwait_q
, cmdnode
->cmdwaitqwoken
);
1594 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1595 ret
= cmdnode
->result
;
1597 netdev_info(priv
->dev
, "PREP_CMD: command 0x%04x failed: %d\n",
1600 __lbs_cleanup_and_insert_cmd(priv
, cmdnode
);
1601 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1606 EXPORT_SYMBOL_GPL(__lbs_cmd
);