1 // SPDX-License-Identifier: GPL-2.0+
3 * Allwinner sun50i(H6) USB 3.0 phy driver
5 * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
7 * Based on phy-sun9i-usb.c, which is:
9 * Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
11 * Based on code from Allwinner BSP, which is:
13 * Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
16 #include <linux/clk.h>
17 #include <linux/err.h>
19 #include <linux/mod_devicetable.h>
20 #include <linux/module.h>
21 #include <linux/phy/phy.h>
22 #include <linux/platform_device.h>
23 #include <linux/reset.h>
25 /* Interface Status and Control Registers */
26 #define SUNXI_ISCR 0x00
27 #define SUNXI_PIPE_CLOCK_CONTROL 0x14
28 #define SUNXI_PHY_TUNE_LOW 0x18
29 #define SUNXI_PHY_TUNE_HIGH 0x1c
30 #define SUNXI_PHY_EXTERNAL_CONTROL 0x20
32 /* USB2.0 Interface Status and Control Register */
33 #define SUNXI_ISCR_FORCE_VBUS (3 << 12)
35 /* PIPE Clock Control Register */
36 #define SUNXI_PCC_PIPE_CLK_OPEN (1 << 6)
38 /* PHY External Control Register */
39 #define SUNXI_PEC_EXTERN_VBUS (3 << 1)
40 #define SUNXI_PEC_SSC_EN (1 << 24)
41 #define SUNXI_PEC_REF_SSP_EN (1 << 26)
43 /* PHY Tune High Register */
44 #define SUNXI_TX_DEEMPH_3P5DB(n) ((n) << 19)
45 #define SUNXI_TX_DEEMPH_3P5DB_MASK GENMASK(24, 19)
46 #define SUNXI_TX_DEEMPH_6DB(n) ((n) << 13)
47 #define SUNXI_TX_DEEMPH_6GB_MASK GENMASK(18, 13)
48 #define SUNXI_TX_SWING_FULL(n) ((n) << 6)
49 #define SUNXI_TX_SWING_FULL_MASK GENMASK(12, 6)
50 #define SUNXI_LOS_BIAS(n) ((n) << 3)
51 #define SUNXI_LOS_BIAS_MASK GENMASK(5, 3)
52 #define SUNXI_TXVBOOSTLVL(n) ((n) << 0)
53 #define SUNXI_TXVBOOSTLVL_MASK GENMASK(2, 0)
55 struct sun50i_usb3_phy
{
58 struct reset_control
*reset
;
62 static void sun50i_usb3_phy_open(struct sun50i_usb3_phy
*phy
)
66 val
= readl(phy
->regs
+ SUNXI_PHY_EXTERNAL_CONTROL
);
67 val
|= SUNXI_PEC_EXTERN_VBUS
;
68 val
|= SUNXI_PEC_SSC_EN
| SUNXI_PEC_REF_SSP_EN
;
69 writel(val
, phy
->regs
+ SUNXI_PHY_EXTERNAL_CONTROL
);
71 val
= readl(phy
->regs
+ SUNXI_PIPE_CLOCK_CONTROL
);
72 val
|= SUNXI_PCC_PIPE_CLK_OPEN
;
73 writel(val
, phy
->regs
+ SUNXI_PIPE_CLOCK_CONTROL
);
75 val
= readl(phy
->regs
+ SUNXI_ISCR
);
76 val
|= SUNXI_ISCR_FORCE_VBUS
;
77 writel(val
, phy
->regs
+ SUNXI_ISCR
);
80 * All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
81 * registers are directly taken from the BSP USB3 driver from
84 writel(0x0047fc87, phy
->regs
+ SUNXI_PHY_TUNE_LOW
);
86 val
= readl(phy
->regs
+ SUNXI_PHY_TUNE_HIGH
);
87 val
&= ~(SUNXI_TXVBOOSTLVL_MASK
| SUNXI_LOS_BIAS_MASK
|
88 SUNXI_TX_SWING_FULL_MASK
| SUNXI_TX_DEEMPH_6GB_MASK
|
89 SUNXI_TX_DEEMPH_3P5DB_MASK
);
90 val
|= SUNXI_TXVBOOSTLVL(0x7);
91 val
|= SUNXI_LOS_BIAS(0x7);
92 val
|= SUNXI_TX_SWING_FULL(0x55);
93 val
|= SUNXI_TX_DEEMPH_6DB(0x20);
94 val
|= SUNXI_TX_DEEMPH_3P5DB(0x15);
95 writel(val
, phy
->regs
+ SUNXI_PHY_TUNE_HIGH
);
98 static int sun50i_usb3_phy_init(struct phy
*_phy
)
100 struct sun50i_usb3_phy
*phy
= phy_get_drvdata(_phy
);
103 ret
= clk_prepare_enable(phy
->clk
);
107 ret
= reset_control_deassert(phy
->reset
);
109 clk_disable_unprepare(phy
->clk
);
113 sun50i_usb3_phy_open(phy
);
117 static int sun50i_usb3_phy_exit(struct phy
*_phy
)
119 struct sun50i_usb3_phy
*phy
= phy_get_drvdata(_phy
);
121 reset_control_assert(phy
->reset
);
122 clk_disable_unprepare(phy
->clk
);
127 static const struct phy_ops sun50i_usb3_phy_ops
= {
128 .init
= sun50i_usb3_phy_init
,
129 .exit
= sun50i_usb3_phy_exit
,
130 .owner
= THIS_MODULE
,
133 static int sun50i_usb3_phy_probe(struct platform_device
*pdev
)
135 struct sun50i_usb3_phy
*phy
;
136 struct device
*dev
= &pdev
->dev
;
137 struct phy_provider
*phy_provider
;
139 phy
= devm_kzalloc(dev
, sizeof(*phy
), GFP_KERNEL
);
143 phy
->clk
= devm_clk_get(dev
, NULL
);
144 if (IS_ERR(phy
->clk
)) {
145 if (PTR_ERR(phy
->clk
) != -EPROBE_DEFER
)
146 dev_err(dev
, "failed to get phy clock\n");
147 return PTR_ERR(phy
->clk
);
150 phy
->reset
= devm_reset_control_get(dev
, NULL
);
151 if (IS_ERR(phy
->reset
)) {
152 dev_err(dev
, "failed to get reset control\n");
153 return PTR_ERR(phy
->reset
);
156 phy
->regs
= devm_platform_ioremap_resource(pdev
, 0);
157 if (IS_ERR(phy
->regs
))
158 return PTR_ERR(phy
->regs
);
160 phy
->phy
= devm_phy_create(dev
, NULL
, &sun50i_usb3_phy_ops
);
161 if (IS_ERR(phy
->phy
)) {
162 dev_err(dev
, "failed to create PHY\n");
163 return PTR_ERR(phy
->phy
);
166 phy_set_drvdata(phy
->phy
, phy
);
167 phy_provider
= devm_of_phy_provider_register(dev
, of_phy_simple_xlate
);
169 return PTR_ERR_OR_ZERO(phy_provider
);
172 static const struct of_device_id sun50i_usb3_phy_of_match
[] = {
173 { .compatible
= "allwinner,sun50i-h6-usb3-phy" },
176 MODULE_DEVICE_TABLE(of
, sun50i_usb3_phy_of_match
);
178 static struct platform_driver sun50i_usb3_phy_driver
= {
179 .probe
= sun50i_usb3_phy_probe
,
181 .of_match_table
= sun50i_usb3_phy_of_match
,
182 .name
= "sun50i-usb3-phy",
185 module_platform_driver(sun50i_usb3_phy_driver
);
187 MODULE_DESCRIPTION("Allwinner H6 USB 3.0 phy driver");
188 MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
189 MODULE_LICENSE("GPL");