?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace...
[drm/drm-misc.git] / drivers / regulator / bd718x7-regulator.c
blob1bb048de3ecd5a8df1087a48afc728a64623a024
1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2018 ROHM Semiconductors
3 // bd71837-regulator.c ROHM BD71837MWV/BD71847MWV regulator driver
4
5 #include <linux/cleanup.h>
6 #include <linux/delay.h>
7 #include <linux/err.h>
8 #include <linux/interrupt.h>
9 #include <linux/kernel.h>
10 #include <linux/mfd/rohm-bd718x7.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/platform_device.h>
14 #include <linux/regulator/driver.h>
15 #include <linux/regulator/machine.h>
16 #include <linux/regulator/of_regulator.h>
17 #include <linux/slab.h>
18
19 /* Typical regulator startup times as per data sheet in uS */
20 #define BD71847_BUCK1_STARTUP_TIME 144
21 #define BD71847_BUCK2_STARTUP_TIME 162
22 #define BD71847_BUCK3_STARTUP_TIME 162
23 #define BD71847_BUCK4_STARTUP_TIME 240
24 #define BD71847_BUCK5_STARTUP_TIME 270
25 #define BD71847_BUCK6_STARTUP_TIME 200
26 #define BD71847_LDO1_STARTUP_TIME 440
27 #define BD71847_LDO2_STARTUP_TIME 370
28 #define BD71847_LDO3_STARTUP_TIME 310
29 #define BD71847_LDO4_STARTUP_TIME 400
30 #define BD71847_LDO5_STARTUP_TIME 530
31 #define BD71847_LDO6_STARTUP_TIME 400
32
33 #define BD71837_BUCK1_STARTUP_TIME 160
34 #define BD71837_BUCK2_STARTUP_TIME 180
35 #define BD71837_BUCK3_STARTUP_TIME 180
36 #define BD71837_BUCK4_STARTUP_TIME 180
37 #define BD71837_BUCK5_STARTUP_TIME 160
38 #define BD71837_BUCK6_STARTUP_TIME 240
39 #define BD71837_BUCK7_STARTUP_TIME 220
40 #define BD71837_BUCK8_STARTUP_TIME 200
41 #define BD71837_LDO1_STARTUP_TIME 440
42 #define BD71837_LDO2_STARTUP_TIME 370
43 #define BD71837_LDO3_STARTUP_TIME 310
44 #define BD71837_LDO4_STARTUP_TIME 400
45 #define BD71837_LDO5_STARTUP_TIME 310
46 #define BD71837_LDO6_STARTUP_TIME 400
47 #define BD71837_LDO7_STARTUP_TIME 530
48
49 /*
50 * BD718(37/47/50) have two "enable control modes". ON/OFF can either be
51 * controlled by software - or by PMIC internal HW state machine. Whether
52 * regulator should be under SW or HW control can be defined from device-tree.
53 * Let's provide separate ops for regulators to use depending on the "enable
54 * control mode".
55 */
56 #define BD718XX_HWOPNAME(swopname) swopname##_hwcontrol
57
58 #define BD718XX_OPS(name, _list_voltage, _map_voltage, _set_voltage_sel, \
59 _get_voltage_sel, _set_voltage_time_sel, _set_ramp_delay, \
60 _set_uvp, _set_ovp) \
61 static const struct regulator_ops name = { \
62 .enable = regulator_enable_regmap, \
63 .disable = regulator_disable_regmap, \
64 .is_enabled = regulator_is_enabled_regmap, \
65 .list_voltage = (_list_voltage), \
66 .map_voltage = (_map_voltage), \
67 .set_voltage_sel = (_set_voltage_sel), \
68 .get_voltage_sel = (_get_voltage_sel), \
69 .set_voltage_time_sel = (_set_voltage_time_sel), \
70 .set_ramp_delay = (_set_ramp_delay), \
71 .set_under_voltage_protection = (_set_uvp), \
72 .set_over_voltage_protection = (_set_ovp), \
73 }; \
74 \
75 static const struct regulator_ops BD718XX_HWOPNAME(name) = { \
76 .is_enabled = always_enabled_by_hwstate, \
77 .list_voltage = (_list_voltage), \
78 .map_voltage = (_map_voltage), \
79 .set_voltage_sel = (_set_voltage_sel), \
80 .get_voltage_sel = (_get_voltage_sel), \
81 .set_voltage_time_sel = (_set_voltage_time_sel), \
82 .set_ramp_delay = (_set_ramp_delay), \
83 .set_under_voltage_protection = (_set_uvp), \
84 .set_over_voltage_protection = (_set_ovp), \
85 } \
86
87 /*
88 * BUCK1/2/3/4
89 * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
90 * 00: 10.00mV/usec 10mV 1uS
91 * 01: 5.00mV/usec 10mV 2uS
92 * 10: 2.50mV/usec 10mV 4uS
93 * 11: 1.25mV/usec 10mV 8uS
94 */
95 static const unsigned int bd718xx_ramp_delay[] = { 10000, 5000, 2500, 1250 };
96
97 /* These functions are used when regulators are under HW state machine control.
98 * We assume PMIC is in RUN state because SW running and able to query the
99 * status. Most of the regulators have fixed ON or OFF state at RUN/IDLE so for
100 * them we just return a constant. BD71837 BUCK3 and BUCK4 are exceptions as
101 * they support configuring the ON/OFF state for RUN.
102 *
103 * Note for next hacker - these PMICs have a register where the HW state can be
104 * read. If assuming RUN appears to be false in your use-case - you can
105 * implement state reading (although that is not going to be atomic) before
106 * returning the enable state.
107 */
108 static int always_enabled_by_hwstate(struct regulator_dev *rdev)
109 {
110 return 1;
111 }
112
113 static int never_enabled_by_hwstate(struct regulator_dev *rdev)
114 {
115 return 0;
116 }
117
118 static int bd71837_get_buck34_enable_hwctrl(struct regulator_dev *rdev)
119 {
120 int ret;
121 unsigned int val;
122
123 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
124 if (ret)
125 return ret;
126
127 return !!(BD718XX_BUCK_RUN_ON & val);
128 }
129
130 static void voltage_change_done(struct regulator_dev *rdev, unsigned int sel,
131 unsigned int *mask)
132 {
133 int ret;
134
135 if (*mask) {
136 /*
137 * Let's allow scheduling as we use I2C anyways. We just need to
138 * guarantee minimum of 1ms sleep - it shouldn't matter if we
139 * exceed it due to the scheduling.
140 */
141 msleep(1);
142
143 ret = regmap_clear_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
144 *mask);
145 if (ret)
146 dev_err(&rdev->dev,
147 "Failed to re-enable voltage monitoring (%d)\n",
148 ret);
149 }
150 }
151
152 static int voltage_change_prepare(struct regulator_dev *rdev, unsigned int sel,
153 unsigned int *mask)
154 {
155 int ret;
156
157 *mask = 0;
158 if (rdev->desc->ops->is_enabled(rdev)) {
159 int now, new;
160
161 now = rdev->desc->ops->get_voltage_sel(rdev);
162 if (now < 0)
163 return now;
164
165 now = rdev->desc->ops->list_voltage(rdev, now);
166 if (now < 0)
167 return now;
168
169 new = rdev->desc->ops->list_voltage(rdev, sel);
170 if (new < 0)
171 return new;
172
173 /*
174 * If we increase LDO voltage when LDO is enabled we need to
175 * disable the power-good detection until voltage has reached
176 * the new level. According to HW colleagues the maximum time
177 * it takes is 1000us. I assume that on systems with light load
178 * this might be less - and we could probably use DT to give
179 * system specific delay value if performance matters.
180 *
181 * Well, knowing we use I2C here and can add scheduling delays
182 * I don't think it is worth the hassle and I just add fixed
183 * 1ms sleep here (and allow scheduling). If this turns out to
184 * be a problem we can change it to delay and make the delay
185 * time configurable.
186 */
187 if (new > now) {
188 int tmp;
189 int prot_bit;
190 int ldo_offset = rdev->desc->id - BD718XX_LDO1;
191
192 prot_bit = BD718XX_LDO1_VRMON80 << ldo_offset;
193 ret = regmap_read(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
194 &tmp);
195 if (ret) {
196 dev_err(&rdev->dev,
197 "Failed to read voltage monitoring state\n");
198 return ret;
199 }
200
201 if (!(tmp & prot_bit)) {
202 /* We disable protection if it was enabled... */
203 ret = regmap_set_bits(rdev->regmap,
204 BD718XX_REG_MVRFLTMASK2,
205 prot_bit);
206 /* ...and we also want to re-enable it */
207 *mask = prot_bit;
208 }
209 if (ret) {
210 dev_err(&rdev->dev,
211 "Failed to stop voltage monitoring\n");
212 return ret;
213 }
214 }
215 }
216
217 return 0;
218 }
219
220 static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
221 unsigned int sel)
222 {
223 int ret;
224 int mask;
225
226 ret = voltage_change_prepare(rdev, sel, &mask);
227 if (ret)
228 return ret;
229
230 ret = regulator_set_voltage_sel_regmap(rdev, sel);
231 voltage_change_done(rdev, sel, &mask);
232
233 return ret;
234 }
235
236 static int bd718xx_set_voltage_sel_pickable_restricted(
237 struct regulator_dev *rdev, unsigned int sel)
238 {
239 int ret;
240 int mask;
241
242 ret = voltage_change_prepare(rdev, sel, &mask);
243 if (ret)
244 return ret;
245
246 ret = regulator_set_voltage_sel_pickable_regmap(rdev, sel);
247 voltage_change_done(rdev, sel, &mask);
248
249 return ret;
250 }
251
252 static int bd71837_set_voltage_sel_pickable_restricted(
253 struct regulator_dev *rdev, unsigned int sel)
254 {
255 if (rdev->desc->ops->is_enabled(rdev))
256 return -EBUSY;
257
258 return regulator_set_voltage_sel_pickable_regmap(rdev, sel);
259 }
260
261 /*
262 * BD71837 BUCK1/2/3/4
263 * BD71847 BUCK1/2
264 * 0.70 to 1.30V (10mV step)
265 */
266 static const struct linear_range bd718xx_dvs_buck_volts[] = {
267 REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
268 REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
269 };
270
271 /*
272 * BD71837 BUCK5
273 * 0.7V to 1.35V (range 0)
274 * and
275 * 0.675 to 1.325 (range 1)
276 */
277 static const struct linear_range bd71837_buck5_volts[] = {
278 /* Ranges when VOLT_SEL bit is 0 */
279 REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
280 REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
281 REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
282 /* Ranges when VOLT_SEL bit is 1 */
283 REGULATOR_LINEAR_RANGE(675000, 0x0, 0x3, 100000),
284 REGULATOR_LINEAR_RANGE(1025000, 0x4, 0x5, 50000),
285 REGULATOR_LINEAR_RANGE(1175000, 0x6, 0x7, 150000),
286 };
287
288 /*
289 * Range selector for first 3 linear ranges is 0x0
290 * and 0x1 for last 3 ranges.
291 */
292 static const unsigned int bd71837_buck5_volt_range_sel[] = {
293 0x0, 0x0, 0x0, 0x1, 0x1, 0x1
294 };
295
296 /*
297 * BD71847 BUCK3
298 */
299 static const struct linear_range bd71847_buck3_volts[] = {
300 /* Ranges when VOLT_SEL bits are 00 */
301 REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
302 REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
303 REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
304 /* Ranges when VOLT_SEL bits are 01 */
305 REGULATOR_LINEAR_RANGE(550000, 0x0, 0x7, 50000),
306 /* Ranges when VOLT_SEL bits are 11 */
307 REGULATOR_LINEAR_RANGE(675000, 0x0, 0x3, 100000),
308 REGULATOR_LINEAR_RANGE(1025000, 0x4, 0x5, 50000),
309 REGULATOR_LINEAR_RANGE(1175000, 0x6, 0x7, 150000),
310 };
311
312 static const unsigned int bd71847_buck3_volt_range_sel[] = {
313 0x0, 0x0, 0x0, 0x1, 0x2, 0x2, 0x2
314 };
315
316 static const struct linear_range bd71847_buck4_volts[] = {
317 REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
318 REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000),
319 };
320
321 static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x1 };
322
323 /*
324 * BUCK6
325 * 3.0V to 3.3V (step 100mV)
326 */
327 static const struct linear_range bd71837_buck6_volts[] = {
328 REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
329 };
330
331 /*
332 * BD71837 BUCK7
333 * BD71847 BUCK5
334 * 000 = 1.605V
335 * 001 = 1.695V
336 * 010 = 1.755V
337 * 011 = 1.8V (Initial)
338 * 100 = 1.845V
339 * 101 = 1.905V
340 * 110 = 1.95V
341 * 111 = 1.995V
342 */
343 static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = {
344 1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000
345 };
346
347 /*
348 * BUCK8
349 * 0.8V to 1.40V (step 10mV)
350 */
351 static const struct linear_range bd718xx_4th_nodvs_buck_volts[] = {
352 REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
353 };
354
355 /*
356 * LDO1
357 * 3.0 to 3.3V (100mV step)
358 */
359 static const struct linear_range bd718xx_ldo1_volts[] = {
360 REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
361 REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000),
362 };
363
364 static const unsigned int bd718xx_ldo1_volt_range_sel[] = { 0x0, 0x1 };
365
366 /*
367 * LDO2
368 * 0.8 or 0.9V
369 */
370 static const unsigned int ldo_2_volts[] = {
371 900000, 800000
372 };
373
374 /*
375 * LDO3
376 * 1.8 to 3.3V (100mV step)
377 */
378 static const struct linear_range bd718xx_ldo3_volts[] = {
379 REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
380 };
381
382 /*
383 * LDO4
384 * 0.9 to 1.8V (100mV step)
385 */
386 static const struct linear_range bd718xx_ldo4_volts[] = {
387 REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
388 };
389
390 /*
391 * LDO5 for BD71837
392 * 1.8 to 3.3V (100mV step)
393 */
394 static const struct linear_range bd71837_ldo5_volts[] = {
395 REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
396 };
397
398 /*
399 * LDO5 for BD71837
400 * 1.8 to 3.3V (100mV step)
401 */
402 static const struct linear_range bd71847_ldo5_volts[] = {
403 REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
404 REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000),
405 };
406
407 static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x1 };
408
409 /*
410 * LDO6
411 * 0.9 to 1.8V (100mV step)
412 */
413 static const struct linear_range bd718xx_ldo6_volts[] = {
414 REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
415 };
416
417 /*
418 * LDO7
419 * 1.8 to 3.3V (100mV step)
420 */
421 static const struct linear_range bd71837_ldo7_volts[] = {
422 REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
423 };
424
425 struct reg_init {
426 unsigned int reg;
427 unsigned int mask;
428 unsigned int val;
429 };
430 struct bd718xx_regulator_data {
431 struct regulator_desc desc;
432 const struct rohm_dvs_config dvs;
433 const struct reg_init init;
434 const struct reg_init *additional_inits;
435 int additional_init_amnt;
436 };
437
438 static int bd718x7_xvp_sanity_check(struct regulator_dev *rdev, int lim_uV,
439 int severity)
440 {
441 /*
442 * BD71837/47/50 ... (ICs supported by this driver) do not provide
443 * warnings, only protection
444 */
445 if (severity != REGULATOR_SEVERITY_PROT) {
446 dev_err(&rdev->dev,
447 "Unsupported Under Voltage protection level\n");
448 return -EINVAL;
449 }
450
451 /*
452 * And protection limit is not changeable. It can only be enabled
453 * or disabled
454 */
455 if (lim_uV)
456 return -EINVAL;
457
458 return 0;
459 }
460
461 static int bd718x7_set_ldo_uvp(struct regulator_dev *rdev, int lim_uV,
462 int severity, bool enable)
463 {
464 int ldo_offset = rdev->desc->id - BD718XX_LDO1;
465 int prot_bit, ret;
466
467 ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity);
468 if (ret)
469 return ret;
470
471 prot_bit = BD718XX_LDO1_VRMON80 << ldo_offset;
472
473 if (enable)
474 return regmap_clear_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
475 prot_bit);
476
477 return regmap_set_bits(rdev->regmap, BD718XX_REG_MVRFLTMASK2,
478 prot_bit);
479 }
480
481 static int bd718x7_get_buck_prot_reg(int id, int *reg)
482 {
483
484 if (id > BD718XX_BUCK8) {
485 WARN_ON(id > BD718XX_BUCK8);
486 return -EINVAL;
487 }
488
489 if (id > BD718XX_BUCK4)
490 *reg = BD718XX_REG_MVRFLTMASK0;
491 else
492 *reg = BD718XX_REG_MVRFLTMASK1;
493
494 return 0;
495 }
496
497 static int bd718x7_get_buck_ovp_info(int id, int *reg, int *bit)
498 {
499 int ret;
500
501 ret = bd718x7_get_buck_prot_reg(id, reg);
502 if (ret)
503 return ret;
504
505 *bit = BIT((id % 4) * 2 + 1);
506
507 return 0;
508 }
509
510 static int bd718x7_get_buck_uvp_info(int id, int *reg, int *bit)
511 {
512 int ret;
513
514 ret = bd718x7_get_buck_prot_reg(id, reg);
515 if (ret)
516 return ret;
517
518 *bit = BIT((id % 4) * 2);
519
520 return 0;
521 }
522
523 static int bd718x7_set_buck_uvp(struct regulator_dev *rdev, int lim_uV,
524 int severity, bool enable)
525 {
526 int bit, reg, ret;
527
528 ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity);
529 if (ret)
530 return ret;
531
532 ret = bd718x7_get_buck_uvp_info(rdev->desc->id, &reg, &bit);
533 if (ret)
534 return ret;
535
536 if (enable)
537 return regmap_clear_bits(rdev->regmap, reg, bit);
538
539 return regmap_set_bits(rdev->regmap, reg, bit);
540
541 }
542
543 static int bd718x7_set_buck_ovp(struct regulator_dev *rdev, int lim_uV,
544 int severity,
545 bool enable)
546 {
547 int bit, reg, ret;
548
549 ret = bd718x7_xvp_sanity_check(rdev, lim_uV, severity);
550 if (ret)
551 return ret;
552
553 ret = bd718x7_get_buck_ovp_info(rdev->desc->id, &reg, &bit);
554 if (ret)
555 return ret;
556
557 if (enable)
558 return regmap_clear_bits(rdev->regmap, reg, bit);
559
560 return regmap_set_bits(rdev->regmap, reg, bit);
561 }
562
563 /*
564 * OPS common for BD71847 and BD71850
565 */
566 BD718XX_OPS(bd718xx_pickable_range_ldo_ops,
567 regulator_list_voltage_pickable_linear_range, NULL,
568 bd718xx_set_voltage_sel_pickable_restricted,
569 regulator_get_voltage_sel_pickable_regmap, NULL, NULL,
570 bd718x7_set_ldo_uvp, NULL);
571
572 /* BD71847 and BD71850 LDO 5 is by default OFF at RUN state */
573 static const struct regulator_ops bd718xx_ldo5_ops_hwstate = {
574 .is_enabled = never_enabled_by_hwstate,
575 .list_voltage = regulator_list_voltage_pickable_linear_range,
576 .set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
577 .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
578 .set_under_voltage_protection = bd718x7_set_ldo_uvp,
579 };
580
581 BD718XX_OPS(bd718xx_pickable_range_buck_ops,
582 regulator_list_voltage_pickable_linear_range, NULL,
583 regulator_set_voltage_sel_pickable_regmap,
584 regulator_get_voltage_sel_pickable_regmap,
585 regulator_set_voltage_time_sel, NULL, bd718x7_set_buck_uvp,
586 bd718x7_set_buck_ovp);
587
588 BD718XX_OPS(bd718xx_ldo_regulator_ops, regulator_list_voltage_linear_range,
589 NULL, bd718xx_set_voltage_sel_restricted,
590 regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
591 NULL);
592
593 BD718XX_OPS(bd718xx_ldo_regulator_nolinear_ops, regulator_list_voltage_table,
594 NULL, bd718xx_set_voltage_sel_restricted,
595 regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
596 NULL);
597
598 BD718XX_OPS(bd718xx_buck_regulator_ops, regulator_list_voltage_linear_range,
599 NULL, regulator_set_voltage_sel_regmap,
600 regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
601 NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
602
603 BD718XX_OPS(bd718xx_buck_regulator_nolinear_ops, regulator_list_voltage_table,
604 regulator_map_voltage_ascend, regulator_set_voltage_sel_regmap,
605 regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
606 NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
607
608 /*
609 * OPS for BD71837
610 */
611 BD718XX_OPS(bd71837_pickable_range_ldo_ops,
612 regulator_list_voltage_pickable_linear_range, NULL,
613 bd71837_set_voltage_sel_pickable_restricted,
614 regulator_get_voltage_sel_pickable_regmap, NULL, NULL,
615 bd718x7_set_ldo_uvp, NULL);
616
617 BD718XX_OPS(bd71837_pickable_range_buck_ops,
618 regulator_list_voltage_pickable_linear_range, NULL,
619 bd71837_set_voltage_sel_pickable_restricted,
620 regulator_get_voltage_sel_pickable_regmap,
621 regulator_set_voltage_time_sel, NULL, bd718x7_set_buck_uvp,
622 bd718x7_set_buck_ovp);
623
624 BD718XX_OPS(bd71837_ldo_regulator_ops, regulator_list_voltage_linear_range,
625 NULL, rohm_regulator_set_voltage_sel_restricted,
626 regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
627 NULL);
628
629 BD718XX_OPS(bd71837_ldo_regulator_nolinear_ops, regulator_list_voltage_table,
630 NULL, rohm_regulator_set_voltage_sel_restricted,
631 regulator_get_voltage_sel_regmap, NULL, NULL, bd718x7_set_ldo_uvp,
632 NULL);
633
634 BD718XX_OPS(bd71837_buck_regulator_ops, regulator_list_voltage_linear_range,
635 NULL, rohm_regulator_set_voltage_sel_restricted,
636 regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
637 NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
638
639 BD718XX_OPS(bd71837_buck_regulator_nolinear_ops, regulator_list_voltage_table,
640 regulator_map_voltage_ascend, rohm_regulator_set_voltage_sel_restricted,
641 regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
642 NULL, bd718x7_set_buck_uvp, bd718x7_set_buck_ovp);
643 /*
644 * BD71837 bucks 3 and 4 support defining their enable/disable state also
645 * when buck enable state is under HW state machine control. In that case the
646 * bit [2] in CTRL register is used to indicate if regulator should be ON.
647 */
648 static const struct regulator_ops bd71837_buck34_ops_hwctrl = {
649 .is_enabled = bd71837_get_buck34_enable_hwctrl,
650 .list_voltage = regulator_list_voltage_linear_range,
651 .set_voltage_sel = regulator_set_voltage_sel_regmap,
652 .get_voltage_sel = regulator_get_voltage_sel_regmap,
653 .set_voltage_time_sel = regulator_set_voltage_time_sel,
654 .set_ramp_delay = regulator_set_ramp_delay_regmap,
655 .set_under_voltage_protection = bd718x7_set_buck_uvp,
656 .set_over_voltage_protection = bd718x7_set_buck_ovp,
657 };
658
659 /*
660 * OPS for all of the ICs - BD718(37/47/50)
661 */
662 BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range,
663 NULL, regulator_set_voltage_sel_regmap,
664 regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
665 regulator_set_ramp_delay_regmap, bd718x7_set_buck_uvp,
666 bd718x7_set_buck_ovp);
667
668
669
670 /*
671 * There is a HW quirk in BD71837. The shutdown sequence timings for
672 * bucks/LDOs which are controlled via register interface are changed.
673 * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
674 * beginning of shut-down sequence. As bucks 6 and 7 are parent
675 * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage
676 * monitoring to errorneously detect under voltage and force PMIC to
677 * emergency state instead of poweroff. In order to avoid this we
678 * disable voltage monitoring for LDO5 and LDO6
679 */
680 static const struct reg_init bd71837_ldo5_inits[] = {
681 {
682 .reg = BD718XX_REG_MVRFLTMASK2,
683 .mask = BD718XX_LDO5_VRMON80,
684 .val = BD718XX_LDO5_VRMON80,
685 },
686 };
687
688 static const struct reg_init bd71837_ldo6_inits[] = {
689 {
690 .reg = BD718XX_REG_MVRFLTMASK2,
691 .mask = BD718XX_LDO6_VRMON80,
692 .val = BD718XX_LDO6_VRMON80,
693 },
694 };
695
696 static int buck_set_hw_dvs_levels(struct device_node *np,
697 const struct regulator_desc *desc,
698 struct regulator_config *cfg)
699 {
700 struct bd718xx_regulator_data *data;
701
702 data = container_of(desc, struct bd718xx_regulator_data, desc);
703
704 return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap);
705 }
706
707 static const struct regulator_ops *bd71847_swcontrol_ops[] = {
708 &bd718xx_dvs_buck_regulator_ops, &bd718xx_dvs_buck_regulator_ops,
709 &bd718xx_pickable_range_buck_ops, &bd718xx_pickable_range_buck_ops,
710 &bd718xx_buck_regulator_nolinear_ops, &bd718xx_buck_regulator_ops,
711 &bd718xx_pickable_range_ldo_ops, &bd718xx_ldo_regulator_nolinear_ops,
712 &bd718xx_ldo_regulator_ops, &bd718xx_ldo_regulator_ops,
713 &bd718xx_pickable_range_ldo_ops, &bd718xx_ldo_regulator_ops,
714 };
715
716 static const struct regulator_ops *bd71847_hwcontrol_ops[] = {
717 &BD718XX_HWOPNAME(bd718xx_dvs_buck_regulator_ops),
718 &BD718XX_HWOPNAME(bd718xx_dvs_buck_regulator_ops),
719 &BD718XX_HWOPNAME(bd718xx_pickable_range_buck_ops),
720 &BD718XX_HWOPNAME(bd718xx_pickable_range_buck_ops),
721 &BD718XX_HWOPNAME(bd718xx_buck_regulator_nolinear_ops),
722 &BD718XX_HWOPNAME(bd718xx_buck_regulator_ops),
723 &BD718XX_HWOPNAME(bd718xx_pickable_range_ldo_ops),
724 &BD718XX_HWOPNAME(bd718xx_ldo_regulator_nolinear_ops),
725 &BD718XX_HWOPNAME(bd718xx_ldo_regulator_ops),
726 &BD718XX_HWOPNAME(bd718xx_ldo_regulator_ops),
727 &bd718xx_ldo5_ops_hwstate,
728 &BD718XX_HWOPNAME(bd718xx_ldo_regulator_ops),
729 };
730
731 static struct bd718xx_regulator_data bd71847_regulators[] = {
732 {
733 .desc = {
734 .name = "buck1",
735 .of_match = of_match_ptr("BUCK1"),
736 .regulators_node = of_match_ptr("regulators"),
737 .id = BD718XX_BUCK1,
738 .type = REGULATOR_VOLTAGE,
739 .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
740 .linear_ranges = bd718xx_dvs_buck_volts,
741 .n_linear_ranges =
742 ARRAY_SIZE(bd718xx_dvs_buck_volts),
743 .vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN,
744 .vsel_mask = DVS_BUCK_RUN_MASK,
745 .enable_reg = BD718XX_REG_BUCK1_CTRL,
746 .enable_mask = BD718XX_BUCK_EN,
747 .enable_time = BD71847_BUCK1_STARTUP_TIME,
748 .owner = THIS_MODULE,
749 .ramp_delay_table = bd718xx_ramp_delay,
750 .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
751 .ramp_reg = BD718XX_REG_BUCK1_CTRL,
752 .ramp_mask = BUCK_RAMPRATE_MASK,
753 .of_parse_cb = buck_set_hw_dvs_levels,
754 },
755 .dvs = {
756 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
757 ROHM_DVS_LEVEL_SUSPEND,
758 .run_reg = BD718XX_REG_BUCK1_VOLT_RUN,
759 .run_mask = DVS_BUCK_RUN_MASK,
760 .idle_reg = BD718XX_REG_BUCK1_VOLT_IDLE,
761 .idle_mask = DVS_BUCK_RUN_MASK,
762 .suspend_reg = BD718XX_REG_BUCK1_VOLT_SUSP,
763 .suspend_mask = DVS_BUCK_RUN_MASK,
764 },
765 .init = {
766 .reg = BD718XX_REG_BUCK1_CTRL,
767 .mask = BD718XX_BUCK_SEL,
768 .val = BD718XX_BUCK_SEL,
769 },
770 },
771 {
772 .desc = {
773 .name = "buck2",
774 .of_match = of_match_ptr("BUCK2"),
775 .regulators_node = of_match_ptr("regulators"),
776 .id = BD718XX_BUCK2,
777 .type = REGULATOR_VOLTAGE,
778 .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
779 .linear_ranges = bd718xx_dvs_buck_volts,
780 .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
781 .vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN,
782 .vsel_mask = DVS_BUCK_RUN_MASK,
783 .enable_reg = BD718XX_REG_BUCK2_CTRL,
784 .enable_mask = BD718XX_BUCK_EN,
785 .enable_time = BD71847_BUCK2_STARTUP_TIME,
786 .ramp_delay_table = bd718xx_ramp_delay,
787 .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
788 .ramp_reg = BD718XX_REG_BUCK2_CTRL,
789 .ramp_mask = BUCK_RAMPRATE_MASK,
790 .owner = THIS_MODULE,
791 .of_parse_cb = buck_set_hw_dvs_levels,
792 },
793 .dvs = {
794 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE,
795 .run_reg = BD718XX_REG_BUCK2_VOLT_RUN,
796 .run_mask = DVS_BUCK_RUN_MASK,
797 .idle_reg = BD718XX_REG_BUCK2_VOLT_IDLE,
798 .idle_mask = DVS_BUCK_RUN_MASK,
799 },
800 .init = {
801 .reg = BD718XX_REG_BUCK2_CTRL,
802 .mask = BD718XX_BUCK_SEL,
803 .val = BD718XX_BUCK_SEL,
804 },
805 },
806 {
807 .desc = {
808 .name = "buck3",
809 .of_match = of_match_ptr("BUCK3"),
810 .regulators_node = of_match_ptr("regulators"),
811 .id = BD718XX_BUCK3,
812 .type = REGULATOR_VOLTAGE,
813 .n_voltages = BD71847_BUCK3_VOLTAGE_NUM,
814 .linear_ranges = bd71847_buck3_volts,
815 .n_linear_ranges =
816 ARRAY_SIZE(bd71847_buck3_volts),
817 .vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
818 .vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK,
819 .vsel_range_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
820 .vsel_range_mask = BD71847_BUCK3_RANGE_MASK,
821 .linear_range_selectors_bitfield = bd71847_buck3_volt_range_sel,
822 .enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
823 .enable_mask = BD718XX_BUCK_EN,
824 .enable_time = BD71847_BUCK3_STARTUP_TIME,
825 .owner = THIS_MODULE,
826 },
827 .init = {
828 .reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
829 .mask = BD718XX_BUCK_SEL,
830 .val = BD718XX_BUCK_SEL,
831 },
832 },
833 {
834 .desc = {
835 .name = "buck4",
836 .of_match = of_match_ptr("BUCK4"),
837 .regulators_node = of_match_ptr("regulators"),
838 .id = BD718XX_BUCK4,
839 .type = REGULATOR_VOLTAGE,
840 .n_voltages = BD71847_BUCK4_VOLTAGE_NUM,
841 .linear_ranges = bd71847_buck4_volts,
842 .n_linear_ranges =
843 ARRAY_SIZE(bd71847_buck4_volts),
844 .enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
845 .vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
846 .vsel_mask = BD71847_BUCK4_MASK,
847 .vsel_range_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
848 .vsel_range_mask = BD71847_BUCK4_RANGE_MASK,
849 .linear_range_selectors_bitfield = bd71847_buck4_volt_range_sel,
850 .enable_mask = BD718XX_BUCK_EN,
851 .enable_time = BD71847_BUCK4_STARTUP_TIME,
852 .owner = THIS_MODULE,
853 },
854 .init = {
855 .reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
856 .mask = BD718XX_BUCK_SEL,
857 .val = BD718XX_BUCK_SEL,
858 },
859 },
860 {
861 .desc = {
862 .name = "buck5",
863 .of_match = of_match_ptr("BUCK5"),
864 .regulators_node = of_match_ptr("regulators"),
865 .id = BD718XX_BUCK5,
866 .type = REGULATOR_VOLTAGE,
867 .volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
868 .n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
869 .vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT,
870 .vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
871 .enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
872 .enable_mask = BD718XX_BUCK_EN,
873 .enable_time = BD71847_BUCK5_STARTUP_TIME,
874 .owner = THIS_MODULE,
875 },
876 .init = {
877 .reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
878 .mask = BD718XX_BUCK_SEL,
879 .val = BD718XX_BUCK_SEL,
880 },
881 },
882 {
883 .desc = {
884 .name = "buck6",
885 .of_match = of_match_ptr("BUCK6"),
886 .regulators_node = of_match_ptr("regulators"),
887 .id = BD718XX_BUCK6,
888 .type = REGULATOR_VOLTAGE,
889 .n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM,
890 .linear_ranges = bd718xx_4th_nodvs_buck_volts,
891 .n_linear_ranges =
892 ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts),
893 .vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT,
894 .vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
895 .enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
896 .enable_mask = BD718XX_BUCK_EN,
897 .enable_time = BD71847_BUCK6_STARTUP_TIME,
898 .owner = THIS_MODULE,
899 },
900 .init = {
901 .reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
902 .mask = BD718XX_BUCK_SEL,
903 .val = BD718XX_BUCK_SEL,
904 },
905 },
906 {
907 .desc = {
908 .name = "ldo1",
909 .of_match = of_match_ptr("LDO1"),
910 .regulators_node = of_match_ptr("regulators"),
911 .id = BD718XX_LDO1,
912 .type = REGULATOR_VOLTAGE,
913 .n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
914 .linear_ranges = bd718xx_ldo1_volts,
915 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts),
916 .vsel_reg = BD718XX_REG_LDO1_VOLT,
917 .vsel_mask = BD718XX_LDO1_MASK,
918 .vsel_range_reg = BD718XX_REG_LDO1_VOLT,
919 .vsel_range_mask = BD718XX_LDO1_RANGE_MASK,
920 .linear_range_selectors_bitfield = bd718xx_ldo1_volt_range_sel,
921 .enable_reg = BD718XX_REG_LDO1_VOLT,
922 .enable_mask = BD718XX_LDO_EN,
923 .enable_time = BD71847_LDO1_STARTUP_TIME,
924 .owner = THIS_MODULE,
925 },
926 .init = {
927 .reg = BD718XX_REG_LDO1_VOLT,
928 .mask = BD718XX_LDO_SEL,
929 .val = BD718XX_LDO_SEL,
930 },
931 },
932 {
933 .desc = {
934 .name = "ldo2",
935 .of_match = of_match_ptr("LDO2"),
936 .regulators_node = of_match_ptr("regulators"),
937 .id = BD718XX_LDO2,
938 .type = REGULATOR_VOLTAGE,
939 .volt_table = &ldo_2_volts[0],
940 .vsel_reg = BD718XX_REG_LDO2_VOLT,
941 .vsel_mask = BD718XX_LDO2_MASK,
942 .n_voltages = ARRAY_SIZE(ldo_2_volts),
943 .enable_reg = BD718XX_REG_LDO2_VOLT,
944 .enable_mask = BD718XX_LDO_EN,
945 .enable_time = BD71847_LDO2_STARTUP_TIME,
946 .owner = THIS_MODULE,
947 },
948 .init = {
949 .reg = BD718XX_REG_LDO2_VOLT,
950 .mask = BD718XX_LDO_SEL,
951 .val = BD718XX_LDO_SEL,
952 },
953 },
954 {
955 .desc = {
956 .name = "ldo3",
957 .of_match = of_match_ptr("LDO3"),
958 .regulators_node = of_match_ptr("regulators"),
959 .id = BD718XX_LDO3,
960 .type = REGULATOR_VOLTAGE,
961 .n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
962 .linear_ranges = bd718xx_ldo3_volts,
963 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts),
964 .vsel_reg = BD718XX_REG_LDO3_VOLT,
965 .vsel_mask = BD718XX_LDO3_MASK,
966 .enable_reg = BD718XX_REG_LDO3_VOLT,
967 .enable_mask = BD718XX_LDO_EN,
968 .enable_time = BD71847_LDO3_STARTUP_TIME,
969 .owner = THIS_MODULE,
970 },
971 .init = {
972 .reg = BD718XX_REG_LDO3_VOLT,
973 .mask = BD718XX_LDO_SEL,
974 .val = BD718XX_LDO_SEL,
975 },
976 },
977 {
978 .desc = {
979 .name = "ldo4",
980 .of_match = of_match_ptr("LDO4"),
981 .regulators_node = of_match_ptr("regulators"),
982 .id = BD718XX_LDO4,
983 .type = REGULATOR_VOLTAGE,
984 .n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
985 .linear_ranges = bd718xx_ldo4_volts,
986 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts),
987 .vsel_reg = BD718XX_REG_LDO4_VOLT,
988 .vsel_mask = BD718XX_LDO4_MASK,
989 .enable_reg = BD718XX_REG_LDO4_VOLT,
990 .enable_mask = BD718XX_LDO_EN,
991 .enable_time = BD71847_LDO4_STARTUP_TIME,
992 .owner = THIS_MODULE,
993 },
994 .init = {
995 .reg = BD718XX_REG_LDO4_VOLT,
996 .mask = BD718XX_LDO_SEL,
997 .val = BD718XX_LDO_SEL,
998 },
999 },
1000 {
1001 .desc = {
1002 .name = "ldo5",
1003 .of_match = of_match_ptr("LDO5"),
1004 .regulators_node = of_match_ptr("regulators"),
1005 .id = BD718XX_LDO5,
1006 .type = REGULATOR_VOLTAGE,
1007 .n_voltages = BD71847_LDO5_VOLTAGE_NUM,
1008 .linear_ranges = bd71847_ldo5_volts,
1009 .n_linear_ranges = ARRAY_SIZE(bd71847_ldo5_volts),
1010 .vsel_reg = BD718XX_REG_LDO5_VOLT,
1011 .vsel_mask = BD71847_LDO5_MASK,
1012 .vsel_range_reg = BD718XX_REG_LDO5_VOLT,
1013 .vsel_range_mask = BD71847_LDO5_RANGE_MASK,
1014 .linear_range_selectors_bitfield = bd71847_ldo5_volt_range_sel,
1015 .enable_reg = BD718XX_REG_LDO5_VOLT,
1016 .enable_mask = BD718XX_LDO_EN,
1017 .enable_time = BD71847_LDO5_STARTUP_TIME,
1018 .owner = THIS_MODULE,
1019 },
1020 .init = {
1021 .reg = BD718XX_REG_LDO5_VOLT,
1022 .mask = BD718XX_LDO_SEL,
1023 .val = BD718XX_LDO_SEL,
1024 },
1025 },
1026 {
1027 .desc = {
1028 .name = "ldo6",
1029 .of_match = of_match_ptr("LDO6"),
1030 .regulators_node = of_match_ptr("regulators"),
1031 .id = BD718XX_LDO6,
1032 .type = REGULATOR_VOLTAGE,
1033 .n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
1034 .linear_ranges = bd718xx_ldo6_volts,
1035 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts),
1036 /* LDO6 is supplied by buck5 */
1037 .supply_name = "buck5",
1038 .vsel_reg = BD718XX_REG_LDO6_VOLT,
1039 .vsel_mask = BD718XX_LDO6_MASK,
1040 .enable_reg = BD718XX_REG_LDO6_VOLT,
1041 .enable_mask = BD718XX_LDO_EN,
1042 .enable_time = BD71847_LDO6_STARTUP_TIME,
1043 .owner = THIS_MODULE,
1044 },
1045 .init = {
1046 .reg = BD718XX_REG_LDO6_VOLT,
1047 .mask = BD718XX_LDO_SEL,
1048 .val = BD718XX_LDO_SEL,
1049 },
1050 },
1051 };
1052
1053 static const struct regulator_ops *bd71837_swcontrol_ops[] = {
1054 &bd718xx_dvs_buck_regulator_ops, &bd718xx_dvs_buck_regulator_ops,
1055 &bd718xx_dvs_buck_regulator_ops, &bd718xx_dvs_buck_regulator_ops,
1056 &bd71837_pickable_range_buck_ops, &bd71837_buck_regulator_ops,
1057 &bd71837_buck_regulator_nolinear_ops, &bd71837_buck_regulator_ops,
1058 &bd71837_pickable_range_ldo_ops, &bd71837_ldo_regulator_nolinear_ops,
1059 &bd71837_ldo_regulator_ops, &bd71837_ldo_regulator_ops,
1060 &bd71837_ldo_regulator_ops, &bd71837_ldo_regulator_ops,
1061 &bd71837_ldo_regulator_ops,
1062 };
1063
1064 static const struct regulator_ops *bd71837_hwcontrol_ops[] = {
1065 &BD718XX_HWOPNAME(bd718xx_dvs_buck_regulator_ops),
1066 &BD718XX_HWOPNAME(bd718xx_dvs_buck_regulator_ops),
1067 &bd71837_buck34_ops_hwctrl, &bd71837_buck34_ops_hwctrl,
1068 &BD718XX_HWOPNAME(bd71837_pickable_range_buck_ops),
1069 &BD718XX_HWOPNAME(bd71837_buck_regulator_ops),
1070 &BD718XX_HWOPNAME(bd71837_buck_regulator_nolinear_ops),
1071 &BD718XX_HWOPNAME(bd71837_buck_regulator_ops),
1072 &BD718XX_HWOPNAME(bd71837_pickable_range_ldo_ops),
1073 &BD718XX_HWOPNAME(bd71837_ldo_regulator_nolinear_ops),
1074 &BD718XX_HWOPNAME(bd71837_ldo_regulator_ops),
1075 &BD718XX_HWOPNAME(bd71837_ldo_regulator_ops),
1076 &BD718XX_HWOPNAME(bd71837_ldo_regulator_ops),
1077 &BD718XX_HWOPNAME(bd71837_ldo_regulator_ops),
1078 &BD718XX_HWOPNAME(bd71837_ldo_regulator_ops),
1079 };
1080
1081 static struct bd718xx_regulator_data bd71837_regulators[] = {
1082 {
1083 .desc = {
1084 .name = "buck1",
1085 .of_match = of_match_ptr("BUCK1"),
1086 .regulators_node = of_match_ptr("regulators"),
1087 .id = BD718XX_BUCK1,
1088 .type = REGULATOR_VOLTAGE,
1089 .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
1090 .linear_ranges = bd718xx_dvs_buck_volts,
1091 .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
1092 .vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN,
1093 .vsel_mask = DVS_BUCK_RUN_MASK,
1094 .enable_reg = BD718XX_REG_BUCK1_CTRL,
1095 .enable_mask = BD718XX_BUCK_EN,
1096 .enable_time = BD71837_BUCK1_STARTUP_TIME,
1097 .ramp_delay_table = bd718xx_ramp_delay,
1098 .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
1099 .ramp_reg = BD718XX_REG_BUCK1_CTRL,
1100 .ramp_mask = BUCK_RAMPRATE_MASK,
1101 .owner = THIS_MODULE,
1102 .of_parse_cb = buck_set_hw_dvs_levels,
1103 },
1104 .dvs = {
1105 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
1106 ROHM_DVS_LEVEL_SUSPEND,
1107 .run_reg = BD718XX_REG_BUCK1_VOLT_RUN,
1108 .run_mask = DVS_BUCK_RUN_MASK,
1109 .idle_reg = BD718XX_REG_BUCK1_VOLT_IDLE,
1110 .idle_mask = DVS_BUCK_RUN_MASK,
1111 .suspend_reg = BD718XX_REG_BUCK1_VOLT_SUSP,
1112 .suspend_mask = DVS_BUCK_RUN_MASK,
1113 },
1114 .init = {
1115 .reg = BD718XX_REG_BUCK1_CTRL,
1116 .mask = BD718XX_BUCK_SEL,
1117 .val = BD718XX_BUCK_SEL,
1118 },
1119 },
1120 {
1121 .desc = {
1122 .name = "buck2",
1123 .of_match = of_match_ptr("BUCK2"),
1124 .regulators_node = of_match_ptr("regulators"),
1125 .id = BD718XX_BUCK2,
1126 .type = REGULATOR_VOLTAGE,
1127 .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
1128 .linear_ranges = bd718xx_dvs_buck_volts,
1129 .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
1130 .vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN,
1131 .vsel_mask = DVS_BUCK_RUN_MASK,
1132 .enable_reg = BD718XX_REG_BUCK2_CTRL,
1133 .enable_mask = BD718XX_BUCK_EN,
1134 .enable_time = BD71837_BUCK2_STARTUP_TIME,
1135 .ramp_delay_table = bd718xx_ramp_delay,
1136 .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
1137 .ramp_reg = BD718XX_REG_BUCK2_CTRL,
1138 .ramp_mask = BUCK_RAMPRATE_MASK,
1139 .owner = THIS_MODULE,
1140 .of_parse_cb = buck_set_hw_dvs_levels,
1141 },
1142 .dvs = {
1143 .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE,
1144 .run_reg = BD718XX_REG_BUCK2_VOLT_RUN,
1145 .run_mask = DVS_BUCK_RUN_MASK,
1146 .idle_reg = BD718XX_REG_BUCK2_VOLT_IDLE,
1147 .idle_mask = DVS_BUCK_RUN_MASK,
1148 },
1149 .init = {
1150 .reg = BD718XX_REG_BUCK2_CTRL,
1151 .mask = BD718XX_BUCK_SEL,
1152 .val = BD718XX_BUCK_SEL,
1153 },
1154 },
1155 {
1156 .desc = {
1157 .name = "buck3",
1158 .of_match = of_match_ptr("BUCK3"),
1159 .regulators_node = of_match_ptr("regulators"),
1160 .id = BD718XX_BUCK3,
1161 .type = REGULATOR_VOLTAGE,
1162 .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
1163 .linear_ranges = bd718xx_dvs_buck_volts,
1164 .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
1165 .vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
1166 .vsel_mask = DVS_BUCK_RUN_MASK,
1167 .enable_reg = BD71837_REG_BUCK3_CTRL,
1168 .enable_mask = BD718XX_BUCK_EN,
1169 .enable_time = BD71837_BUCK3_STARTUP_TIME,
1170 .ramp_delay_table = bd718xx_ramp_delay,
1171 .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
1172 .ramp_reg = BD71837_REG_BUCK3_CTRL,
1173 .ramp_mask = BUCK_RAMPRATE_MASK,
1174 .owner = THIS_MODULE,
1175 .of_parse_cb = buck_set_hw_dvs_levels,
1176 },
1177 .dvs = {
1178 .level_map = ROHM_DVS_LEVEL_RUN,
1179 .run_reg = BD71837_REG_BUCK3_VOLT_RUN,
1180 .run_mask = DVS_BUCK_RUN_MASK,
1181 },
1182 .init = {
1183 .reg = BD71837_REG_BUCK3_CTRL,
1184 .mask = BD718XX_BUCK_SEL,
1185 .val = BD718XX_BUCK_SEL,
1186 },
1187 },
1188 {
1189 .desc = {
1190 .name = "buck4",
1191 .of_match = of_match_ptr("BUCK4"),
1192 .regulators_node = of_match_ptr("regulators"),
1193 .id = BD718XX_BUCK4,
1194 .type = REGULATOR_VOLTAGE,
1195 .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
1196 .linear_ranges = bd718xx_dvs_buck_volts,
1197 .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
1198 .vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
1199 .vsel_mask = DVS_BUCK_RUN_MASK,
1200 .enable_reg = BD71837_REG_BUCK4_CTRL,
1201 .enable_mask = BD718XX_BUCK_EN,
1202 .enable_time = BD71837_BUCK4_STARTUP_TIME,
1203 .ramp_delay_table = bd718xx_ramp_delay,
1204 .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
1205 .ramp_reg = BD71837_REG_BUCK4_CTRL,
1206 .ramp_mask = BUCK_RAMPRATE_MASK,
1207 .owner = THIS_MODULE,
1208 .of_parse_cb = buck_set_hw_dvs_levels,
1209 },
1210 .dvs = {
1211 .level_map = ROHM_DVS_LEVEL_RUN,
1212 .run_reg = BD71837_REG_BUCK4_VOLT_RUN,
1213 .run_mask = DVS_BUCK_RUN_MASK,
1214 },
1215 .init = {
1216 .reg = BD71837_REG_BUCK4_CTRL,
1217 .mask = BD718XX_BUCK_SEL,
1218 .val = BD718XX_BUCK_SEL,
1219 },
1220 },
1221 {
1222 .desc = {
1223 .name = "buck5",
1224 .of_match = of_match_ptr("BUCK5"),
1225 .regulators_node = of_match_ptr("regulators"),
1226 .id = BD718XX_BUCK5,
1227 .type = REGULATOR_VOLTAGE,
1228 .n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
1229 .linear_ranges = bd71837_buck5_volts,
1230 .n_linear_ranges =
1231 ARRAY_SIZE(bd71837_buck5_volts),
1232 .vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
1233 .vsel_mask = BD71837_BUCK5_MASK,
1234 .vsel_range_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
1235 .vsel_range_mask = BD71837_BUCK5_RANGE_MASK,
1236 .linear_range_selectors_bitfield = bd71837_buck5_volt_range_sel,
1237 .enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
1238 .enable_mask = BD718XX_BUCK_EN,
1239 .enable_time = BD71837_BUCK5_STARTUP_TIME,
1240 .owner = THIS_MODULE,
1241 },
1242 .init = {
1243 .reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
1244 .mask = BD718XX_BUCK_SEL,
1245 .val = BD718XX_BUCK_SEL,
1246 },
1247 },
1248 {
1249 .desc = {
1250 .name = "buck6",
1251 .of_match = of_match_ptr("BUCK6"),
1252 .regulators_node = of_match_ptr("regulators"),
1253 .id = BD718XX_BUCK6,
1254 .type = REGULATOR_VOLTAGE,
1255 .n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
1256 .linear_ranges = bd71837_buck6_volts,
1257 .n_linear_ranges =
1258 ARRAY_SIZE(bd71837_buck6_volts),
1259 .vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
1260 .vsel_mask = BD71837_BUCK6_MASK,
1261 .enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
1262 .enable_mask = BD718XX_BUCK_EN,
1263 .enable_time = BD71837_BUCK6_STARTUP_TIME,
1264 .owner = THIS_MODULE,
1265 },
1266 .init = {
1267 .reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
1268 .mask = BD718XX_BUCK_SEL,
1269 .val = BD718XX_BUCK_SEL,
1270 },
1271 },
1272 {
1273 .desc = {
1274 .name = "buck7",
1275 .of_match = of_match_ptr("BUCK7"),
1276 .regulators_node = of_match_ptr("regulators"),
1277 .id = BD718XX_BUCK7,
1278 .type = REGULATOR_VOLTAGE,
1279 .volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
1280 .n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
1281 .vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT,
1282 .vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
1283 .enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
1284 .enable_mask = BD718XX_BUCK_EN,
1285 .enable_time = BD71837_BUCK7_STARTUP_TIME,
1286 .owner = THIS_MODULE,
1287 },
1288 .init = {
1289 .reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
1290 .mask = BD718XX_BUCK_SEL,
1291 .val = BD718XX_BUCK_SEL,
1292 },
1293 },
1294 {
1295 .desc = {
1296 .name = "buck8",
1297 .of_match = of_match_ptr("BUCK8"),
1298 .regulators_node = of_match_ptr("regulators"),
1299 .id = BD718XX_BUCK8,
1300 .type = REGULATOR_VOLTAGE,
1301 .n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM,
1302 .linear_ranges = bd718xx_4th_nodvs_buck_volts,
1303 .n_linear_ranges =
1304 ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts),
1305 .vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT,
1306 .vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
1307 .enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
1308 .enable_mask = BD718XX_BUCK_EN,
1309 .enable_time = BD71837_BUCK8_STARTUP_TIME,
1310 .owner = THIS_MODULE,
1311 },
1312 .init = {
1313 .reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
1314 .mask = BD718XX_BUCK_SEL,
1315 .val = BD718XX_BUCK_SEL,
1316 },
1317 },
1318 {
1319 .desc = {
1320 .name = "ldo1",
1321 .of_match = of_match_ptr("LDO1"),
1322 .regulators_node = of_match_ptr("regulators"),
1323 .id = BD718XX_LDO1,
1324 .type = REGULATOR_VOLTAGE,
1325 .n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
1326 .linear_ranges = bd718xx_ldo1_volts,
1327 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts),
1328 .vsel_reg = BD718XX_REG_LDO1_VOLT,
1329 .vsel_mask = BD718XX_LDO1_MASK,
1330 .vsel_range_reg = BD718XX_REG_LDO1_VOLT,
1331 .vsel_range_mask = BD718XX_LDO1_RANGE_MASK,
1332 .linear_range_selectors_bitfield = bd718xx_ldo1_volt_range_sel,
1333 .enable_reg = BD718XX_REG_LDO1_VOLT,
1334 .enable_mask = BD718XX_LDO_EN,
1335 .enable_time = BD71837_LDO1_STARTUP_TIME,
1336 .owner = THIS_MODULE,
1337 },
1338 .init = {
1339 .reg = BD718XX_REG_LDO1_VOLT,
1340 .mask = BD718XX_LDO_SEL,
1341 .val = BD718XX_LDO_SEL,
1342 },
1343 },
1344 {
1345 .desc = {
1346 .name = "ldo2",
1347 .of_match = of_match_ptr("LDO2"),
1348 .regulators_node = of_match_ptr("regulators"),
1349 .id = BD718XX_LDO2,
1350 .type = REGULATOR_VOLTAGE,
1351 .volt_table = &ldo_2_volts[0],
1352 .vsel_reg = BD718XX_REG_LDO2_VOLT,
1353 .vsel_mask = BD718XX_LDO2_MASK,
1354 .n_voltages = ARRAY_SIZE(ldo_2_volts),
1355 .enable_reg = BD718XX_REG_LDO2_VOLT,
1356 .enable_mask = BD718XX_LDO_EN,
1357 .enable_time = BD71837_LDO2_STARTUP_TIME,
1358 .owner = THIS_MODULE,
1359 },
1360 .init = {
1361 .reg = BD718XX_REG_LDO2_VOLT,
1362 .mask = BD718XX_LDO_SEL,
1363 .val = BD718XX_LDO_SEL,
1364 },
1365 },
1366 {
1367 .desc = {
1368 .name = "ldo3",
1369 .of_match = of_match_ptr("LDO3"),
1370 .regulators_node = of_match_ptr("regulators"),
1371 .id = BD718XX_LDO3,
1372 .type = REGULATOR_VOLTAGE,
1373 .n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
1374 .linear_ranges = bd718xx_ldo3_volts,
1375 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts),
1376 .vsel_reg = BD718XX_REG_LDO3_VOLT,
1377 .vsel_mask = BD718XX_LDO3_MASK,
1378 .enable_reg = BD718XX_REG_LDO3_VOLT,
1379 .enable_mask = BD718XX_LDO_EN,
1380 .enable_time = BD71837_LDO3_STARTUP_TIME,
1381 .owner = THIS_MODULE,
1382 },
1383 .init = {
1384 .reg = BD718XX_REG_LDO3_VOLT,
1385 .mask = BD718XX_LDO_SEL,
1386 .val = BD718XX_LDO_SEL,
1387 },
1388 },
1389 {
1390 .desc = {
1391 .name = "ldo4",
1392 .of_match = of_match_ptr("LDO4"),
1393 .regulators_node = of_match_ptr("regulators"),
1394 .id = BD718XX_LDO4,
1395 .type = REGULATOR_VOLTAGE,
1396 .n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
1397 .linear_ranges = bd718xx_ldo4_volts,
1398 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts),
1399 .vsel_reg = BD718XX_REG_LDO4_VOLT,
1400 .vsel_mask = BD718XX_LDO4_MASK,
1401 .enable_reg = BD718XX_REG_LDO4_VOLT,
1402 .enable_mask = BD718XX_LDO_EN,
1403 .enable_time = BD71837_LDO4_STARTUP_TIME,
1404 .owner = THIS_MODULE,
1405 },
1406 .init = {
1407 .reg = BD718XX_REG_LDO4_VOLT,
1408 .mask = BD718XX_LDO_SEL,
1409 .val = BD718XX_LDO_SEL,
1410 },
1411 },
1412 {
1413 .desc = {
1414 .name = "ldo5",
1415 .of_match = of_match_ptr("LDO5"),
1416 .regulators_node = of_match_ptr("regulators"),
1417 .id = BD718XX_LDO5,
1418 .type = REGULATOR_VOLTAGE,
1419 .n_voltages = BD71837_LDO5_VOLTAGE_NUM,
1420 .linear_ranges = bd71837_ldo5_volts,
1421 .n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_volts),
1422 /* LDO5 is supplied by buck6 */
1423 .supply_name = "buck6",
1424 .vsel_reg = BD718XX_REG_LDO5_VOLT,
1425 .vsel_mask = BD71837_LDO5_MASK,
1426 .enable_reg = BD718XX_REG_LDO5_VOLT,
1427 .enable_mask = BD718XX_LDO_EN,
1428 .enable_time = BD71837_LDO5_STARTUP_TIME,
1429 .owner = THIS_MODULE,
1430 },
1431 .init = {
1432 .reg = BD718XX_REG_LDO5_VOLT,
1433 .mask = BD718XX_LDO_SEL,
1434 .val = BD718XX_LDO_SEL,
1435 },
1436 .additional_inits = bd71837_ldo5_inits,
1437 .additional_init_amnt = ARRAY_SIZE(bd71837_ldo5_inits),
1438 },
1439 {
1440 .desc = {
1441 .name = "ldo6",
1442 .of_match = of_match_ptr("LDO6"),
1443 .regulators_node = of_match_ptr("regulators"),
1444 .id = BD718XX_LDO6,
1445 .type = REGULATOR_VOLTAGE,
1446 .n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
1447 .linear_ranges = bd718xx_ldo6_volts,
1448 .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts),
1449 /* LDO6 is supplied by buck7 */
1450 .supply_name = "buck7",
1451 .vsel_reg = BD718XX_REG_LDO6_VOLT,
1452 .vsel_mask = BD718XX_LDO6_MASK,
1453 .enable_reg = BD718XX_REG_LDO6_VOLT,
1454 .enable_mask = BD718XX_LDO_EN,
1455 .enable_time = BD71837_LDO6_STARTUP_TIME,
1456 .owner = THIS_MODULE,
1457 },
1458 .init = {
1459 .reg = BD718XX_REG_LDO6_VOLT,
1460 .mask = BD718XX_LDO_SEL,
1461 .val = BD718XX_LDO_SEL,
1462 },
1463 .additional_inits = bd71837_ldo6_inits,
1464 .additional_init_amnt = ARRAY_SIZE(bd71837_ldo6_inits),
1465 },
1466 {
1467 .desc = {
1468 .name = "ldo7",
1469 .of_match = of_match_ptr("LDO7"),
1470 .regulators_node = of_match_ptr("regulators"),
1471 .id = BD718XX_LDO7,
1472 .type = REGULATOR_VOLTAGE,
1473 .n_voltages = BD71837_LDO7_VOLTAGE_NUM,
1474 .linear_ranges = bd71837_ldo7_volts,
1475 .n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_volts),
1476 .vsel_reg = BD71837_REG_LDO7_VOLT,
1477 .vsel_mask = BD71837_LDO7_MASK,
1478 .enable_reg = BD71837_REG_LDO7_VOLT,
1479 .enable_mask = BD718XX_LDO_EN,
1480 .enable_time = BD71837_LDO7_STARTUP_TIME,
1481 .owner = THIS_MODULE,
1482 },
1483 .init = {
1484 .reg = BD71837_REG_LDO7_VOLT,
1485 .mask = BD718XX_LDO_SEL,
1486 .val = BD718XX_LDO_SEL,
1487 },
1488 },
1489 };
1490
1491 static void mark_hw_controlled(struct device *dev, struct device_node *np,
1492 struct bd718xx_regulator_data *reg_data,
1493 unsigned int num_reg_data, int *info)
1494 {
1495 int i;
1496
1497 for (i = 1; i <= num_reg_data; i++) {
1498 if (!of_node_name_eq(np, reg_data[i-1].desc.of_match))
1499 continue;
1500
1501 *info |= 1 << (i - 1);
1502 dev_dbg(dev, "regulator %d runlevel controlled\n", i);
1503 return;
1504 }
1505 dev_warn(dev, "Bad regulator node\n");
1506 }
1507
1508 /*
1509 * Setups where regulator (especially the buck8) output voltage is scaled
1510 * by adding external connection where some other regulator output is connected
1511 * to feedback-pin (over suitable resistors) is getting popular amongst users
1512 * of BD71837. (This allows for example scaling down the buck8 voltages to suit
1513 * lover GPU voltages for projects where buck8 is (ab)used to supply power
1514 * for GPU. Additionally some setups do allow DVS for buck8 but as this do
1515 * produce voltage spikes the HW must be evaluated to be able to survive this
1516 * - hence I keep the DVS disabled for non DVS bucks by default. I don't want
1517 * to help you burn your proto board)
1518 *
1519 * So we allow describing this external connection from DT and scale the
1520 * voltages accordingly. This is what the connection should look like:
1521 *
1522 * |------------|
1523 * | buck 8 |-------+----->Vout
1524 * | | |
1525 * |------------| |
1526 * | FB pin |
1527 * | |
1528 * +-------+--R2---+
1529 * |
1530 * R1
1531 * |
1532 * V FB-pull-up
1533 *
1534 * Here the buck output is sifted according to formula:
1535 *
1536 * Vout_o = Vo - (Vpu - Vo)*R2/R1
1537 * Linear_step = step_orig*(R1+R2)/R1
1538 *
1539 * where:
1540 * Vout_o is adjusted voltage output at vsel reg value 0
1541 * Vo is original voltage output at vsel reg value 0
1542 * Vpu is the pull-up voltage V FB-pull-up in the picture
1543 * R1 and R2 are resistor values.
1544 *
1545 * As a real world example for buck8 and a specific GPU:
1546 * VLDO = 1.6V (used as FB-pull-up)
1547 * R1 = 1000ohms
1548 * R2 = 150ohms
1549 * VSEL 0x0 => 0.8V – (VLDO – 0.8) * R2 / R1 = 0.68V
1550 * Linear Step = 10mV * (R1 + R2) / R1 = 11.5mV
1551 */
1552 static int setup_feedback_loop(struct device *dev, struct device_node *np,
1553 struct bd718xx_regulator_data *reg_data,
1554 unsigned int num_reg_data, int fb_uv)
1555 {
1556 int i, r1, r2, ret;
1557
1558 /*
1559 * We do adjust the values in the global desc based on DT settings.
1560 * This may not be best approach as it can cause problems if more than
1561 * one PMIC is controlled from same processor. I don't see such use-case
1562 * for BD718x7 now - so we spare some bits.
1563 *
1564 * If this will point out to be a problem - then we can allocate new
1565 * bd718xx_regulator_data array at probe and just use the global
1566 * array as a template where we copy initial values. Then we can
1567 * use allocated descs for regultor registration and do IC specific
1568 * modifications to this copy while leaving other PMICs untouched. But
1569 * that means allocating new array for each PMIC - and currently I see
1570 * no need for that.
1571 */
1572
1573 for (i = 0; i < num_reg_data; i++) {
1574 struct regulator_desc *desc = &reg_data[i].desc;
1575 int j;
1576
1577 if (!of_node_name_eq(np, desc->of_match))
1578 continue;
1579
1580 /* The feedback loop connection does not make sense for LDOs */
1581 if (desc->id >= BD718XX_LDO1)
1582 return -EINVAL;
1583
1584 ret = of_property_read_u32(np, "rohm,feedback-pull-up-r1-ohms",
1585 &r1);
1586 if (ret)
1587 return ret;
1588
1589 if (!r1)
1590 return -EINVAL;
1591
1592 ret = of_property_read_u32(np, "rohm,feedback-pull-up-r2-ohms",
1593 &r2);
1594 if (ret)
1595 return ret;
1596
1597 if (desc->n_linear_ranges && desc->linear_ranges) {
1598 struct linear_range *new;
1599
1600 new = devm_kzalloc(dev, desc->n_linear_ranges *
1601 sizeof(struct linear_range),
1602 GFP_KERNEL);
1603 if (!new)
1604 return -ENOMEM;
1605
1606 for (j = 0; j < desc->n_linear_ranges; j++) {
1607 int min = desc->linear_ranges[j].min;
1608 int step = desc->linear_ranges[j].step;
1609
1610 min -= (fb_uv - min)*r2/r1;
1611 step = step * (r1 + r2);
1612 step /= r1;
1613
1614 new[j].min = min;
1615 new[j].step = step;
1616
1617 dev_dbg(dev, "%s: old range min %d, step %d\n",
1618 desc->name, desc->linear_ranges[j].min,
1619 desc->linear_ranges[j].step);
1620 dev_dbg(dev, "new range min %d, step %d\n", min,
1621 step);
1622 }
1623 desc->linear_ranges = new;
1624 }
1625 dev_dbg(dev, "regulator '%s' has FB pull-up configured\n",
1626 desc->name);
1627
1628 return 0;
1629 }
1630
1631 return -ENODEV;
1632 }
1633
1634 static int get_special_regulators(struct device *dev,
1635 struct bd718xx_regulator_data *reg_data,
1636 unsigned int num_reg_data, int *info)
1637 {
1638 int ret;
1639 int uv;
1640
1641 *info = 0;
1642
1643 struct device_node *nproot __free(device_node) = of_get_child_by_name(dev->of_node,
1644 "regulators");
1645 if (!nproot) {
1646 dev_err(dev, "failed to find regulators node\n");
1647 return -ENODEV;
1648 }
1649 for_each_child_of_node_scoped(nproot, np) {
1650 if (of_property_read_bool(np, "rohm,no-regulator-enable-control"))
1651 mark_hw_controlled(dev, np, reg_data, num_reg_data,
1652 info);
1653 ret = of_property_read_u32(np, "rohm,fb-pull-up-microvolt",
1654 &uv);
1655 if (ret) {
1656 if (ret == -EINVAL)
1657 continue;
1658 else
1659 return ret;
1660 }
1661
1662 ret = setup_feedback_loop(dev, np, reg_data, num_reg_data, uv);
1663 if (ret)
1664 return ret;
1665 }
1666
1667 return 0;
1668 }
1669
1670 static int bd718xx_probe(struct platform_device *pdev)
1671 {
1672 struct regmap *regmap;
1673 struct regulator_config config = { 0 };
1674 int i, j, err, omit_enable;
1675 bool use_snvs;
1676 struct bd718xx_regulator_data *reg_data;
1677 unsigned int num_reg_data;
1678 enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
1679 const struct regulator_ops **swops, **hwops;
1680
1681 regmap = dev_get_regmap(pdev->dev.parent, NULL);
1682 if (!regmap) {
1683 dev_err(&pdev->dev, "No MFD driver data\n");
1684 return -EINVAL;
1685 }
1686
1687 switch (chip) {
1688 case ROHM_CHIP_TYPE_BD71837:
1689 reg_data = bd71837_regulators;
1690 num_reg_data = ARRAY_SIZE(bd71837_regulators);
1691 swops = &bd71837_swcontrol_ops[0];
1692 hwops = &bd71837_hwcontrol_ops[0];
1693 break;
1694 case ROHM_CHIP_TYPE_BD71847:
1695 reg_data = bd71847_regulators;
1696 num_reg_data = ARRAY_SIZE(bd71847_regulators);
1697 swops = &bd71847_swcontrol_ops[0];
1698 hwops = &bd71847_hwcontrol_ops[0];
1699 break;
1700 default:
1701 dev_err(&pdev->dev, "Unsupported chip type\n");
1702 return -EINVAL;
1703 }
1704
1705 /* Register LOCK release */
1706 err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK,
1707 (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
1708 if (err)
1709 return dev_err_probe(&pdev->dev, err, "Failed to unlock PMIC\n");
1710
1711 dev_dbg(&pdev->dev, "Unlocked lock register 0x%x\n",
1712 BD718XX_REG_REGLOCK);
1713
1714 use_snvs = of_property_read_bool(pdev->dev.parent->of_node,
1715 "rohm,reset-snvs-powered");
1716
1717 /*
1718 * Change the next stage from poweroff to be READY instead of SNVS
1719 * for all reset types because OTP loading at READY will clear SEL
1720 * bit allowing HW defaults for power rails to be used
1721 */
1722 if (!use_snvs) {
1723 err = regmap_update_bits(regmap, BD718XX_REG_TRANS_COND1,
1724 BD718XX_ON_REQ_POWEROFF_MASK |
1725 BD718XX_SWRESET_POWEROFF_MASK |
1726 BD718XX_WDOG_POWEROFF_MASK |
1727 BD718XX_KEY_L_POWEROFF_MASK,
1728 BD718XX_POWOFF_TO_RDY);
1729 if (err)
1730 return dev_err_probe(&pdev->dev, err,
1731 "Failed to change reset target\n");
1732
1733 dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n");
1734 }
1735
1736 config.dev = pdev->dev.parent;
1737 config.regmap = regmap;
1738 /*
1739 * There are cases when we want to leave the enable-control for
1740 * the HW state machine and use this driver only for voltage control.
1741 * One special case is when we use PMIC_STBY_REQ line from SoC to PMIC
1742 * in order to set the system to SUSPEND state.
1743 *
1744 * If regulator is taken under SW control the regulator state will not
1745 * be affected by PMIC state machine - Eg. regulator is likely to stay
1746 * on even in SUSPEND
1747 */
1748 err = get_special_regulators(pdev->dev.parent, reg_data, num_reg_data,
1749 &omit_enable);
1750 if (err)
1751 return err;
1752
1753 for (i = 0; i < num_reg_data; i++) {
1754
1755 struct regulator_desc *desc;
1756 struct regulator_dev *rdev;
1757 struct bd718xx_regulator_data *r;
1758 int no_enable_control = omit_enable & (1 << i);
1759
1760 r = &reg_data[i];
1761 desc = &r->desc;
1762
1763 if (no_enable_control)
1764 desc->ops = hwops[i];
1765 else
1766 desc->ops = swops[i];
1767
1768 rdev = devm_regulator_register(&pdev->dev, desc, &config);
1769 if (IS_ERR(rdev))
1770 return dev_err_probe(&pdev->dev, PTR_ERR(rdev),
1771 "failed to register %s regulator\n",
1772 desc->name);
1773
1774 /*
1775 * Regulator register gets the regulator constraints and
1776 * applies them (set_machine_constraints). This should have
1777 * turned the control register(s) to correct values and we
1778 * can now switch the control from PMIC state machine to the
1779 * register interface
1780 *
1781 * At poweroff transition PMIC HW disables EN bit for
1782 * regulators but leaves SEL bit untouched. So if state
1783 * transition from POWEROFF is done to SNVS - then all power
1784 * rails controlled by SW (having SEL bit set) stay disabled
1785 * as EN is cleared. This will result boot failure if any
1786 * crucial systems are powered by these rails. We don't
1787 * enable SW control for crucial regulators if snvs state is
1788 * used
1789 */
1790 if (!no_enable_control && (!use_snvs ||
1791 !rdev->constraints->always_on ||
1792 !rdev->constraints->boot_on)) {
1793 err = regmap_update_bits(regmap, r->init.reg,
1794 r->init.mask, r->init.val);
1795 if (err)
1796 return dev_err_probe(&pdev->dev, err,
1797 "Failed to take control for (%s)\n",
1798 desc->name);
1799 }
1800 for (j = 0; j < r->additional_init_amnt; j++) {
1801 err = regmap_update_bits(regmap,
1802 r->additional_inits[j].reg,
1803 r->additional_inits[j].mask,
1804 r->additional_inits[j].val);
1805 if (err)
1806 return dev_err_probe(&pdev->dev, err,
1807 "Buck (%s) initialization failed\n",
1808 desc->name);
1809 }
1810 }
1811
1812 return err;
1813 }
1814
1815 static const struct platform_device_id bd718x7_pmic_id[] = {
1816 { "bd71837-pmic", ROHM_CHIP_TYPE_BD71837 },
1817 { "bd71847-pmic", ROHM_CHIP_TYPE_BD71847 },
1818 { },
1819 };
1820 MODULE_DEVICE_TABLE(platform, bd718x7_pmic_id);
1821
1822 static struct platform_driver bd718xx_regulator = {
1823 .driver = {
1824 .name = "bd718xx-pmic",
1825 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1826 },
1827 .probe = bd718xx_probe,
1828 .id_table = bd718x7_pmic_id,
1829 };
1830
1831 module_platform_driver(bd718xx_regulator);
1832
1833 MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
1834 MODULE_DESCRIPTION("BD71837/BD71847 voltage regulator driver");
1835 MODULE_LICENSE("GPL");
1836 MODULE_ALIAS("platform:bd718xx-pmic");
Kernel DRM miscellaneous fixes and cross-tree changes