drivers/tty/serial/uartlite.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * uartlite.c: Serial driver for Xilinx uartlite serial controller
   4  *
   5  * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
   6  * Copyright (C) 2007 Secret Lab Technologies Ltd.
   7  */
   8
   9 #include <linux/platform_device.h>
  10 #include <linux/module.h>
  11 #include <linux/bitfield.h>
  12 #include <linux/console.h>
  13 #include <linux/serial.h>
  14 #include <linux/serial_core.h>
  15 #include <linux/tty.h>
  16 #include <linux/tty_flip.h>
  17 #include <linux/delay.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/init.h>
  20 #include <linux/io.h>
  21 #include <linux/iopoll.h>
  22 #include <linux/of.h>
  23 #include <linux/clk.h>
  24 #include <linux/pm_runtime.h>
  25
  26 #define ULITE_NAME              "ttyUL"
  27 #if CONFIG_SERIAL_UARTLITE_NR_UARTS > 4
  28 #define ULITE_MAJOR             0       /* use dynamic node allocation */
  29 #define ULITE_MINOR             0
  30 #else
  31 #define ULITE_MAJOR             204
  32 #define ULITE_MINOR             187
  33 #endif
  34 #define ULITE_NR_UARTS          CONFIG_SERIAL_UARTLITE_NR_UARTS
  35
  36 /* ---------------------------------------------------------------------
  37  * Register definitions
  38  *
  39  * For register details see datasheet:
  40  * https://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
  41  */
  42
  43 #define ULITE_RX                0x00
  44 #define ULITE_TX                0x04
  45 #define ULITE_STATUS            0x08
  46 #define ULITE_CONTROL           0x0c
  47
  48 #define ULITE_REGION            16
  49
  50 #define ULITE_STATUS_RXVALID    0x01
  51 #define ULITE_STATUS_RXFULL     0x02
  52 #define ULITE_STATUS_TXEMPTY    0x04
  53 #define ULITE_STATUS_TXFULL     0x08
  54 #define ULITE_STATUS_IE         0x10
  55 #define ULITE_STATUS_OVERRUN    0x20
  56 #define ULITE_STATUS_FRAME      0x40
  57 #define ULITE_STATUS_PARITY     0x80
  58
  59 #define ULITE_CONTROL_RST_TX    0x01
  60 #define ULITE_CONTROL_RST_RX    0x02
  61 #define ULITE_CONTROL_IE        0x10
  62 #define UART_AUTOSUSPEND_TIMEOUT        3000    /* ms */
  63
  64 /* Static pointer to console port */
  65 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
  66 static struct uart_port *console_port;
  67 #endif
  68
  69 /**
  70  * struct uartlite_data - Driver private data
  71  * @reg_ops: Functions to read/write registers
  72  * @clk: Our parent clock, if present
  73  * @baud: The baud rate configured when this device was synthesized
  74  * @cflags: The cflags for parity and data bits
  75  */
  76 struct uartlite_data {
  77         const struct uartlite_reg_ops *reg_ops;
  78         struct clk *clk;
  79         unsigned int baud;
  80         tcflag_t cflags;
  81 };
  82
  83 struct uartlite_reg_ops {
  84         u32 (*in)(void __iomem *addr);
  85         void (*out)(u32 val, void __iomem *addr);
  86 };
  87
  88 static u32 uartlite_inbe32(void __iomem *addr)
  89 {
  90         return ioread32be(addr);
  91 }
  92
  93 static void uartlite_outbe32(u32 val, void __iomem *addr)
  94 {
  95         iowrite32be(val, addr);
  96 }
  97
  98 static const struct uartlite_reg_ops uartlite_be = {
  99         .in = uartlite_inbe32,
 100         .out = uartlite_outbe32,
 101 };
 102
 103 static u32 uartlite_inle32(void __iomem *addr)
 104 {
 105         return ioread32(addr);
 106 }
 107
 108 static void uartlite_outle32(u32 val, void __iomem *addr)
 109 {
 110         iowrite32(val, addr);
 111 }
 112
 113 static const struct uartlite_reg_ops uartlite_le = {
 114         .in = uartlite_inle32,
 115         .out = uartlite_outle32,
 116 };
 117
 118 static inline u32 uart_in32(u32 offset, struct uart_port *port)
 119 {
 120         struct uartlite_data *pdata = port->private_data;
 121
 122         return pdata->reg_ops->in(port->membase + offset);
 123 }
 124
 125 static inline void uart_out32(u32 val, u32 offset, struct uart_port *port)
 126 {
 127         struct uartlite_data *pdata = port->private_data;
 128
 129         pdata->reg_ops->out(val, port->membase + offset);
 130 }
 131
 132 static struct uart_port ulite_ports[ULITE_NR_UARTS];
 133
 134 static struct uart_driver ulite_uart_driver;
 135
 136 /* ---------------------------------------------------------------------
 137  * Core UART driver operations
 138  */
 139
 140 static int ulite_receive(struct uart_port *port, int stat)
 141 {
 142         struct tty_port *tport = &port->state->port;
 143         unsigned char ch = 0;
 144         char flag = TTY_NORMAL;
 145
 146         if ((stat & (ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
 147                      | ULITE_STATUS_FRAME)) == 0)
 148                 return 0;
 149
 150         /* stats */
 151         if (stat & ULITE_STATUS_RXVALID) {
 152                 port->icount.rx++;
 153                 ch = uart_in32(ULITE_RX, port);
 154
 155                 if (stat & ULITE_STATUS_PARITY)
 156                         port->icount.parity++;
 157         }
 158
 159         if (stat & ULITE_STATUS_OVERRUN)
 160                 port->icount.overrun++;
 161
 162         if (stat & ULITE_STATUS_FRAME)
 163                 port->icount.frame++;
 164
 165
 166         /* drop byte with parity error if IGNPAR specificed */
 167         if (stat & port->ignore_status_mask & ULITE_STATUS_PARITY)
 168                 stat &= ~ULITE_STATUS_RXVALID;
 169
 170         stat &= port->read_status_mask;
 171
 172         if (stat & ULITE_STATUS_PARITY)
 173                 flag = TTY_PARITY;
 174
 175
 176         stat &= ~port->ignore_status_mask;
 177
 178         if (stat & ULITE_STATUS_RXVALID)
 179                 tty_insert_flip_char(tport, ch, flag);
 180
 181         if (stat & ULITE_STATUS_FRAME)
 182                 tty_insert_flip_char(tport, 0, TTY_FRAME);
 183
 184         if (stat & ULITE_STATUS_OVERRUN)
 185                 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 186
 187         return 1;
 188 }
 189
 190 static int ulite_transmit(struct uart_port *port, int stat)
 191 {
 192         struct tty_port *tport = &port->state->port;
 193         unsigned char ch;
 194
 195         if (stat & ULITE_STATUS_TXFULL)
 196                 return 0;
 197
 198         if (port->x_char) {
 199                 uart_out32(port->x_char, ULITE_TX, port);
 200                 port->x_char = 0;
 201                 port->icount.tx++;
 202                 return 1;
 203         }
 204
 205         if (uart_tx_stopped(port))
 206                 return 0;
 207
 208         if (!uart_fifo_get(port, &ch))
 209                 return 0;
 210
 211         uart_out32(ch, ULITE_TX, port);
 212
 213         /* wake up */
 214         if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
 215                 uart_write_wakeup(port);
 216
 217         return 1;
 218 }
 219
 220 static irqreturn_t ulite_isr(int irq, void *dev_id)
 221 {
 222         struct uart_port *port = dev_id;
 223         int stat, busy, n = 0;
 224         unsigned long flags;
 225
 226         do {
 227                 uart_port_lock_irqsave(port, &flags);
 228                 stat = uart_in32(ULITE_STATUS, port);
 229                 busy  = ulite_receive(port, stat);
 230                 busy |= ulite_transmit(port, stat);
 231                 uart_port_unlock_irqrestore(port, flags);
 232                 n++;
 233         } while (busy);
 234
 235         /* work done? */
 236         if (n > 1) {
 237                 tty_flip_buffer_push(&port->state->port);
 238                 return IRQ_HANDLED;
 239         } else {
 240                 return IRQ_NONE;
 241         }
 242 }
 243
 244 static unsigned int ulite_tx_empty(struct uart_port *port)
 245 {
 246         unsigned long flags;
 247         unsigned int ret;
 248
 249         uart_port_lock_irqsave(port, &flags);
 250         ret = uart_in32(ULITE_STATUS, port);
 251         uart_port_unlock_irqrestore(port, flags);
 252
 253         return ret & ULITE_STATUS_TXEMPTY ? TIOCSER_TEMT : 0;
 254 }
 255
 256 static unsigned int ulite_get_mctrl(struct uart_port *port)
 257 {
 258         return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
 259 }
 260
 261 static void ulite_set_mctrl(struct uart_port *port, unsigned int mctrl)
 262 {
 263         /* N/A */
 264 }
 265
 266 static void ulite_stop_tx(struct uart_port *port)
 267 {
 268         /* N/A */
 269 }
 270
 271 static void ulite_start_tx(struct uart_port *port)
 272 {
 273         ulite_transmit(port, uart_in32(ULITE_STATUS, port));
 274 }
 275
 276 static void ulite_stop_rx(struct uart_port *port)
 277 {
 278         /* don't forward any more data (like !CREAD) */
 279         port->ignore_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
 280                 | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 281 }
 282
 283 static void ulite_break_ctl(struct uart_port *port, int ctl)
 284 {
 285         /* N/A */
 286 }
 287
 288 static int ulite_startup(struct uart_port *port)
 289 {
 290         struct uartlite_data *pdata = port->private_data;
 291         int ret;
 292
 293         ret = clk_enable(pdata->clk);
 294         if (ret) {
 295                 dev_err(port->dev, "Failed to enable clock\n");
 296                 return ret;
 297         }
 298
 299         ret = request_irq(port->irq, ulite_isr, IRQF_SHARED | IRQF_TRIGGER_RISING,
 300                           "uartlite", port);
 301         if (ret)
 302                 return ret;
 303
 304         uart_out32(ULITE_CONTROL_RST_RX | ULITE_CONTROL_RST_TX,
 305                 ULITE_CONTROL, port);
 306         uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
 307
 308         return 0;
 309 }
 310
 311 static void ulite_shutdown(struct uart_port *port)
 312 {
 313         struct uartlite_data *pdata = port->private_data;
 314
 315         uart_out32(0, ULITE_CONTROL, port);
 316         uart_in32(ULITE_CONTROL, port); /* dummy */
 317         free_irq(port->irq, port);
 318         clk_disable(pdata->clk);
 319 }
 320
 321 static void ulite_set_termios(struct uart_port *port,
 322                               struct ktermios *termios,
 323                               const struct ktermios *old)
 324 {
 325         unsigned long flags;
 326         struct uartlite_data *pdata = port->private_data;
 327
 328         /* Set termios to what the hardware supports */
 329         termios->c_iflag &= ~BRKINT;
 330         termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CSIZE);
 331         termios->c_cflag |= pdata->cflags & (PARENB | PARODD | CSIZE);
 332         tty_termios_encode_baud_rate(termios, pdata->baud, pdata->baud);
 333
 334         uart_port_lock_irqsave(port, &flags);
 335
 336         port->read_status_mask = ULITE_STATUS_RXVALID | ULITE_STATUS_OVERRUN
 337                 | ULITE_STATUS_TXFULL;
 338
 339         if (termios->c_iflag & INPCK)
 340                 port->read_status_mask |=
 341                         ULITE_STATUS_PARITY | ULITE_STATUS_FRAME;
 342
 343         port->ignore_status_mask = 0;
 344         if (termios->c_iflag & IGNPAR)
 345                 port->ignore_status_mask |= ULITE_STATUS_PARITY
 346                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 347
 348         /* ignore all characters if CREAD is not set */
 349         if ((termios->c_cflag & CREAD) == 0)
 350                 port->ignore_status_mask |=
 351                         ULITE_STATUS_RXVALID | ULITE_STATUS_PARITY
 352                         | ULITE_STATUS_FRAME | ULITE_STATUS_OVERRUN;
 353
 354         /* update timeout */
 355         uart_update_timeout(port, termios->c_cflag, pdata->baud);
 356
 357         uart_port_unlock_irqrestore(port, flags);
 358 }
 359
 360 static const char *ulite_type(struct uart_port *port)
 361 {
 362         return port->type == PORT_UARTLITE ? "uartlite" : NULL;
 363 }
 364
 365 static void ulite_release_port(struct uart_port *port)
 366 {
 367         release_mem_region(port->mapbase, ULITE_REGION);
 368         iounmap(port->membase);
 369         port->membase = NULL;
 370 }
 371
 372 static int ulite_request_port(struct uart_port *port)
 373 {
 374         struct uartlite_data *pdata = port->private_data;
 375         int ret;
 376
 377         pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
 378                  port, (unsigned long long) port->mapbase);
 379
 380         if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
 381                 dev_err(port->dev, "Memory region busy\n");
 382                 return -EBUSY;
 383         }
 384
 385         port->membase = ioremap(port->mapbase, ULITE_REGION);
 386         if (!port->membase) {
 387                 dev_err(port->dev, "Unable to map registers\n");
 388                 release_mem_region(port->mapbase, ULITE_REGION);
 389                 return -EBUSY;
 390         }
 391
 392         pdata->reg_ops = &uartlite_be;
 393         ret = uart_in32(ULITE_CONTROL, port);
 394         uart_out32(ULITE_CONTROL_RST_TX, ULITE_CONTROL, port);
 395         ret = uart_in32(ULITE_STATUS, port);
 396         /* Endianess detection */
 397         if ((ret & ULITE_STATUS_TXEMPTY) != ULITE_STATUS_TXEMPTY)
 398                 pdata->reg_ops = &uartlite_le;
 399
 400         return 0;
 401 }
 402
 403 static void ulite_config_port(struct uart_port *port, int flags)
 404 {
 405         if (!ulite_request_port(port))
 406                 port->type = PORT_UARTLITE;
 407 }
 408
 409 static int ulite_verify_port(struct uart_port *port, struct serial_struct *ser)
 410 {
 411         /* we don't want the core code to modify any port params */
 412         return -EINVAL;
 413 }
 414
 415 static void ulite_pm(struct uart_port *port, unsigned int state,
 416                      unsigned int oldstate)
 417 {
 418         int ret;
 419
 420         if (!state) {
 421                 ret = pm_runtime_get_sync(port->dev);
 422                 if (ret < 0)
 423                         dev_err(port->dev, "Failed to enable clocks\n");
 424         } else {
 425                 pm_runtime_mark_last_busy(port->dev);
 426                 pm_runtime_put_autosuspend(port->dev);
 427         }
 428 }
 429
 430 #ifdef CONFIG_CONSOLE_POLL
 431 static int ulite_get_poll_char(struct uart_port *port)
 432 {
 433         if (!(uart_in32(ULITE_STATUS, port) & ULITE_STATUS_RXVALID))
 434                 return NO_POLL_CHAR;
 435
 436         return uart_in32(ULITE_RX, port);
 437 }
 438
 439 static void ulite_put_poll_char(struct uart_port *port, unsigned char ch)
 440 {
 441         while (uart_in32(ULITE_STATUS, port) & ULITE_STATUS_TXFULL)
 442                 cpu_relax();
 443
 444         /* write char to device */
 445         uart_out32(ch, ULITE_TX, port);
 446 }
 447 #endif
 448
 449 static const struct uart_ops ulite_ops = {
 450         .tx_empty       = ulite_tx_empty,
 451         .set_mctrl      = ulite_set_mctrl,
 452         .get_mctrl      = ulite_get_mctrl,
 453         .stop_tx        = ulite_stop_tx,
 454         .start_tx       = ulite_start_tx,
 455         .stop_rx        = ulite_stop_rx,
 456         .break_ctl      = ulite_break_ctl,
 457         .startup        = ulite_startup,
 458         .shutdown       = ulite_shutdown,
 459         .set_termios    = ulite_set_termios,
 460         .type           = ulite_type,
 461         .release_port   = ulite_release_port,
 462         .request_port   = ulite_request_port,
 463         .config_port    = ulite_config_port,
 464         .verify_port    = ulite_verify_port,
 465         .pm             = ulite_pm,
 466 #ifdef CONFIG_CONSOLE_POLL
 467         .poll_get_char  = ulite_get_poll_char,
 468         .poll_put_char  = ulite_put_poll_char,
 469 #endif
 470 };
 471
 472 /* ---------------------------------------------------------------------
 473  * Console driver operations
 474  */
 475
 476 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 477 static void ulite_console_wait_tx(struct uart_port *port)
 478 {
 479         u8 val;
 480
 481         /*
 482          * Spin waiting for TX fifo to have space available.
 483          * When using the Microblaze Debug Module this can take up to 1s
 484          */
 485         if (read_poll_timeout_atomic(uart_in32, val, !(val & ULITE_STATUS_TXFULL),
 486                                      0, 1000000, false, ULITE_STATUS, port))
 487                 dev_warn(port->dev,
 488                          "timeout waiting for TX buffer empty\n");
 489 }
 490
 491 static void ulite_console_putchar(struct uart_port *port, unsigned char ch)
 492 {
 493         ulite_console_wait_tx(port);
 494         uart_out32(ch, ULITE_TX, port);
 495 }
 496
 497 static void ulite_console_write(struct console *co, const char *s,
 498                                 unsigned int count)
 499 {
 500         struct uart_port *port = console_port;
 501         unsigned long flags;
 502         unsigned int ier;
 503         int locked = 1;
 504
 505         if (oops_in_progress) {
 506                 locked = uart_port_trylock_irqsave(port, &flags);
 507         } else
 508                 uart_port_lock_irqsave(port, &flags);
 509
 510         /* save and disable interrupt */
 511         ier = uart_in32(ULITE_STATUS, port) & ULITE_STATUS_IE;
 512         uart_out32(0, ULITE_CONTROL, port);
 513
 514         uart_console_write(port, s, count, ulite_console_putchar);
 515
 516         ulite_console_wait_tx(port);
 517
 518         /* restore interrupt state */
 519         if (ier)
 520                 uart_out32(ULITE_CONTROL_IE, ULITE_CONTROL, port);
 521
 522         if (locked)
 523                 uart_port_unlock_irqrestore(port, flags);
 524 }
 525
 526 static int ulite_console_setup(struct console *co, char *options)
 527 {
 528         struct uart_port *port = NULL;
 529         int baud = 9600;
 530         int bits = 8;
 531         int parity = 'n';
 532         int flow = 'n';
 533
 534         if (co->index >= 0 && co->index < ULITE_NR_UARTS)
 535                 port = ulite_ports + co->index;
 536
 537         /* Has the device been initialized yet? */
 538         if (!port || !port->mapbase) {
 539                 pr_debug("console on ttyUL%i not present\n", co->index);
 540                 return -ENODEV;
 541         }
 542
 543         console_port = port;
 544
 545         /* not initialized yet? */
 546         if (!port->membase) {
 547                 if (ulite_request_port(port))
 548                         return -ENODEV;
 549         }
 550
 551         if (options)
 552                 uart_parse_options(options, &baud, &parity, &bits, &flow);
 553
 554         return uart_set_options(port, co, baud, parity, bits, flow);
 555 }
 556
 557 static struct console ulite_console = {
 558         .name   = ULITE_NAME,
 559         .write  = ulite_console_write,
 560         .device = uart_console_device,
 561         .setup  = ulite_console_setup,
 562         .flags  = CON_PRINTBUFFER,
 563         .index  = -1, /* Specified on the cmdline (e.g. console=ttyUL0 ) */
 564         .data   = &ulite_uart_driver,
 565 };
 566
 567 static void early_uartlite_putc(struct uart_port *port, unsigned char c)
 568 {
 569         /*
 570          * Limit how many times we'll spin waiting for TX FIFO status.
 571          * This will prevent lockups if the base address is incorrectly
 572          * set, or any other issue on the UARTLITE.
 573          * This limit is pretty arbitrary, unless we are at about 10 baud
 574          * we'll never timeout on a working UART.
 575          */
 576         unsigned retries = 1000000;
 577
 578         while (--retries &&
 579                (readl(port->membase + ULITE_STATUS) & ULITE_STATUS_TXFULL))
 580                 ;
 581
 582         /* Only attempt the iowrite if we didn't timeout */
 583         if (retries)
 584                 writel(c & 0xff, port->membase + ULITE_TX);
 585 }
 586
 587 static void early_uartlite_write(struct console *console,
 588                                  const char *s, unsigned n)
 589 {
 590         struct earlycon_device *device = console->data;
 591         uart_console_write(&device->port, s, n, early_uartlite_putc);
 592 }
 593
 594 static int __init early_uartlite_setup(struct earlycon_device *device,
 595                                        const char *options)
 596 {
 597         if (!device->port.membase)
 598                 return -ENODEV;
 599
 600         device->con->write = early_uartlite_write;
 601         return 0;
 602 }
 603 EARLYCON_DECLARE(uartlite, early_uartlite_setup);
 604 OF_EARLYCON_DECLARE(uartlite_b, "xlnx,opb-uartlite-1.00.b", early_uartlite_setup);
 605 OF_EARLYCON_DECLARE(uartlite_a, "xlnx,xps-uartlite-1.00.a", early_uartlite_setup);
 606
 607 #endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
 608
 609 static struct uart_driver ulite_uart_driver = {
 610         .owner          = THIS_MODULE,
 611         .driver_name    = "uartlite",
 612         .dev_name       = ULITE_NAME,
 613         .major          = ULITE_MAJOR,
 614         .minor          = ULITE_MINOR,
 615         .nr             = ULITE_NR_UARTS,
 616 #ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
 617         .cons           = &ulite_console,
 618 #endif
 619 };
 620
 621 /* ---------------------------------------------------------------------
 622  * Port assignment functions (mapping devices to uart_port structures)
 623  */
 624
 625 /** ulite_assign: register a uartlite device with the driver
 626  *
 627  * @dev: pointer to device structure
 628  * @id: requested id number.  Pass -1 for automatic port assignment
 629  * @base: base address of uartlite registers
 630  * @irq: irq number for uartlite
 631  * @pdata: private data for uartlite
 632  *
 633  * Returns: 0 on success, <0 otherwise
 634  */
 635 static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
 636                         struct uartlite_data *pdata)
 637 {
 638         struct uart_port *port;
 639         int rc;
 640
 641         /* if id = -1; then scan for a free id and use that */
 642         if (id < 0) {
 643                 for (id = 0; id < ULITE_NR_UARTS; id++)
 644                         if (ulite_ports[id].mapbase == 0)
 645                                 break;
 646         }
 647         if (id < 0 || id >= ULITE_NR_UARTS) {
 648                 dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
 649                 return -EINVAL;
 650         }
 651
 652         if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
 653                 dev_err(dev, "cannot assign to %s%i; it is already in use\n",
 654                         ULITE_NAME, id);
 655                 return -EBUSY;
 656         }
 657
 658         port = &ulite_ports[id];
 659
 660         spin_lock_init(&port->lock);
 661         port->fifosize = 16;
 662         port->regshift = 2;
 663         port->iotype = UPIO_MEM;
 664         port->iobase = 1; /* mark port in use */
 665         port->mapbase = base;
 666         port->membase = NULL;
 667         port->ops = &ulite_ops;
 668         port->irq = irq;
 669         port->flags = UPF_BOOT_AUTOCONF;
 670         port->dev = dev;
 671         port->type = PORT_UNKNOWN;
 672         port->line = id;
 673         port->private_data = pdata;
 674
 675         dev_set_drvdata(dev, port);
 676
 677         /* Register the port */
 678         rc = uart_add_one_port(&ulite_uart_driver, port);
 679         if (rc) {
 680                 dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
 681                 port->mapbase = 0;
 682                 dev_set_drvdata(dev, NULL);
 683                 return rc;
 684         }
 685
 686         return 0;
 687 }
 688
 689 /** ulite_release: register a uartlite device with the driver
 690  *
 691  * @dev: pointer to device structure
 692  */
 693 static void ulite_release(struct device *dev)
 694 {
 695         struct uart_port *port = dev_get_drvdata(dev);
 696
 697         if (port) {
 698                 uart_remove_one_port(&ulite_uart_driver, port);
 699                 dev_set_drvdata(dev, NULL);
 700                 port->mapbase = 0;
 701         }
 702 }
 703
 704 /**
 705  * ulite_suspend - Stop the device.
 706  *
 707  * @dev: handle to the device structure.
 708  * Return: 0 always.
 709  */
 710 static int __maybe_unused ulite_suspend(struct device *dev)
 711 {
 712         struct uart_port *port = dev_get_drvdata(dev);
 713
 714         if (port)
 715                 uart_suspend_port(&ulite_uart_driver, port);
 716
 717         return 0;
 718 }
 719
 720 /**
 721  * ulite_resume - Resume the device.
 722  *
 723  * @dev: handle to the device structure.
 724  * Return: 0 on success, errno otherwise.
 725  */
 726 static int __maybe_unused ulite_resume(struct device *dev)
 727 {
 728         struct uart_port *port = dev_get_drvdata(dev);
 729
 730         if (port)
 731                 uart_resume_port(&ulite_uart_driver, port);
 732
 733         return 0;
 734 }
 735
 736 static int __maybe_unused ulite_runtime_suspend(struct device *dev)
 737 {
 738         struct uart_port *port = dev_get_drvdata(dev);
 739         struct uartlite_data *pdata = port->private_data;
 740
 741         clk_disable(pdata->clk);
 742         return 0;
 743 };
 744
 745 static int __maybe_unused ulite_runtime_resume(struct device *dev)
 746 {
 747         struct uart_port *port = dev_get_drvdata(dev);
 748         struct uartlite_data *pdata = port->private_data;
 749         int ret;
 750
 751         ret = clk_enable(pdata->clk);
 752         if (ret) {
 753                 dev_err(dev, "Cannot enable clock.\n");
 754                 return ret;
 755         }
 756         return 0;
 757 }
 758
 759 /* ---------------------------------------------------------------------
 760  * Platform bus binding
 761  */
 762
 763 static const struct dev_pm_ops ulite_pm_ops = {
 764         SET_SYSTEM_SLEEP_PM_OPS(ulite_suspend, ulite_resume)
 765         SET_RUNTIME_PM_OPS(ulite_runtime_suspend,
 766                            ulite_runtime_resume, NULL)
 767 };
 768
 769 #if defined(CONFIG_OF)
 770 /* Match table for of_platform binding */
 771 static const struct of_device_id ulite_of_match[] = {
 772         { .compatible = "xlnx,opb-uartlite-1.00.b", },
 773         { .compatible = "xlnx,xps-uartlite-1.00.a", },
 774         {}
 775 };
 776 MODULE_DEVICE_TABLE(of, ulite_of_match);
 777 #endif /* CONFIG_OF */
 778
 779 static int ulite_probe(struct platform_device *pdev)
 780 {
 781         struct resource *res;
 782         struct uartlite_data *pdata;
 783         int irq, ret;
 784         int id = pdev->id;
 785
 786         pdata = devm_kzalloc(&pdev->dev, sizeof(struct uartlite_data),
 787                              GFP_KERNEL);
 788         if (!pdata)
 789                 return -ENOMEM;
 790
 791         if (IS_ENABLED(CONFIG_OF)) {
 792                 const char *prop;
 793                 struct device_node *np = pdev->dev.of_node;
 794                 u32 val = 0;
 795
 796                 prop = "port-number";
 797                 ret = of_property_read_u32(np, prop, &id);
 798                 if (ret && ret != -EINVAL)
 799 of_err:
 800                         return dev_err_probe(&pdev->dev, ret,
 801                                              "could not read %s\n", prop);
 802
 803                 prop = "current-speed";
 804                 ret = of_property_read_u32(np, prop, &pdata->baud);
 805                 if (ret)
 806                         goto of_err;
 807
 808                 prop = "xlnx,use-parity";
 809                 ret = of_property_read_u32(np, prop, &val);
 810                 if (ret && ret != -EINVAL)
 811                         goto of_err;
 812
 813                 if (val) {
 814                         prop = "xlnx,odd-parity";
 815                         ret = of_property_read_u32(np, prop, &val);
 816                         if (ret)
 817                                 goto of_err;
 818
 819                         if (val)
 820                                 pdata->cflags |= PARODD;
 821                         pdata->cflags |= PARENB;
 822                 }
 823
 824                 val = 8;
 825                 prop = "xlnx,data-bits";
 826                 ret = of_property_read_u32(np, prop, &val);
 827                 if (ret && ret != -EINVAL)
 828                         goto of_err;
 829
 830                 switch (val) {
 831                 case 5:
 832                         pdata->cflags |= CS5;
 833                         break;
 834                 case 6:
 835                         pdata->cflags |= CS6;
 836                         break;
 837                 case 7:
 838                         pdata->cflags |= CS7;
 839                         break;
 840                 case 8:
 841                         pdata->cflags |= CS8;
 842                         break;
 843                 default:
 844                         return dev_err_probe(&pdev->dev, -EINVAL,
 845                                              "bad data bits %d\n", val);
 846                 }
 847         } else {
 848                 pdata->baud = 9600;
 849                 pdata->cflags = CS8;
 850         }
 851
 852         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 853         if (!res)
 854                 return -ENODEV;
 855
 856         irq = platform_get_irq(pdev, 0);
 857         if (irq < 0)
 858                 return irq;
 859
 860         pdata->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
 861         if (IS_ERR(pdata->clk)) {
 862                 if (PTR_ERR(pdata->clk) != -ENOENT)
 863                         return PTR_ERR(pdata->clk);
 864
 865                 /*
 866                  * Clock framework support is optional, continue on
 867                  * anyways if we don't find a matching clock.
 868                  */
 869                 pdata->clk = NULL;
 870         }
 871
 872         ret = clk_prepare_enable(pdata->clk);
 873         if (ret) {
 874                 dev_err(&pdev->dev, "Failed to prepare clock\n");
 875                 return ret;
 876         }
 877
 878         pm_runtime_use_autosuspend(&pdev->dev);
 879         pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
 880         pm_runtime_set_active(&pdev->dev);
 881         pm_runtime_enable(&pdev->dev);
 882
 883         if (!ulite_uart_driver.state) {
 884                 dev_dbg(&pdev->dev, "uartlite: calling uart_register_driver()\n");
 885                 ret = uart_register_driver(&ulite_uart_driver);
 886                 if (ret < 0) {
 887                         dev_err(&pdev->dev, "Failed to register driver\n");
 888                         clk_disable_unprepare(pdata->clk);
 889                         return ret;
 890                 }
 891         }
 892
 893         ret = ulite_assign(&pdev->dev, id, res->start, irq, pdata);
 894
 895         pm_runtime_mark_last_busy(&pdev->dev);
 896         pm_runtime_put_autosuspend(&pdev->dev);
 897
 898         return ret;
 899 }
 900
 901 static void ulite_remove(struct platform_device *pdev)
 902 {
 903         struct uart_port *port = dev_get_drvdata(&pdev->dev);
 904         struct uartlite_data *pdata = port->private_data;
 905
 906         clk_disable_unprepare(pdata->clk);
 907         ulite_release(&pdev->dev);
 908         pm_runtime_disable(&pdev->dev);
 909         pm_runtime_set_suspended(&pdev->dev);
 910         pm_runtime_dont_use_autosuspend(&pdev->dev);
 911 }
 912
 913 /* work with hotplug and coldplug */
 914 MODULE_ALIAS("platform:uartlite");
 915
 916 static struct platform_driver ulite_platform_driver = {
 917         .probe = ulite_probe,
 918         .remove = ulite_remove,
 919         .driver = {
 920                 .name  = "uartlite",
 921                 .of_match_table = of_match_ptr(ulite_of_match),
 922                 .pm = &ulite_pm_ops,
 923         },
 924 };
 925
 926 /* ---------------------------------------------------------------------
 927  * Module setup/teardown
 928  */
 929
 930 static int __init ulite_init(void)
 931 {
 932
 933         pr_debug("uartlite: calling platform_driver_register()\n");
 934         return platform_driver_register(&ulite_platform_driver);
 935 }
 936
 937 static void __exit ulite_exit(void)
 938 {
 939         platform_driver_unregister(&ulite_platform_driver);
 940         if (ulite_uart_driver.state)
 941                 uart_unregister_driver(&ulite_uart_driver);
 942 }
 943
 944 module_init(ulite_init);
 945 module_exit(ulite_exit);
 946
 947 MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
 948 MODULE_DESCRIPTION("Xilinx uartlite serial driver");
 949 MODULE_LICENSE("GPL");