1 // SPDX-License-Identifier: GPL-2.0-only
3 * UFS Host driver for Synopsys Designware Core
5 * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
7 * Authors: Joao Pinto <jpinto@synopsys.com>
10 #include <linux/module.h>
12 #include <ufs/ufshcd.h>
13 #include <ufs/unipro.h>
15 #include "ufshcd-dwc.h"
16 #include "ufshci-dwc.h"
18 int ufshcd_dwc_dme_set_attrs(struct ufs_hba
*hba
,
19 const struct ufshcd_dme_attr_val
*v
, int n
)
24 for (attr_node
= 0; attr_node
< n
; attr_node
++) {
25 ret
= ufshcd_dme_set_attr(hba
, v
[attr_node
].attr_sel
,
26 ATTR_SET_NOR
, v
[attr_node
].mib_val
, v
[attr_node
].peer
);
34 EXPORT_SYMBOL(ufshcd_dwc_dme_set_attrs
);
37 * ufshcd_dwc_program_clk_div() - program clock divider.
38 * @hba: Private Structure pointer
39 * @divider_val: clock divider value to be programmed
42 static void ufshcd_dwc_program_clk_div(struct ufs_hba
*hba
, u32 divider_val
)
44 ufshcd_writel(hba
, divider_val
, DWC_UFS_REG_HCLKDIV
);
48 * ufshcd_dwc_link_is_up() - check if link is up.
49 * @hba: private structure pointer
51 * Return: 0 on success, non-zero value on failure.
53 static int ufshcd_dwc_link_is_up(struct ufs_hba
*hba
)
57 ufshcd_dme_get(hba
, UIC_ARG_MIB(VS_POWERSTATE
), &dme_result
);
59 if (dme_result
== UFSHCD_LINK_IS_UP
) {
60 ufshcd_set_link_active(hba
);
68 * ufshcd_dwc_connection_setup() - configure unipro attributes.
69 * @hba: pointer to drivers private data
71 * This function configures both the local side (host) and the peer side
72 * (device) unipro attributes to establish the connection to application/
74 * This function is not required if the hardware is properly configured to
75 * have this connection setup on reset. But invoking this function does no
76 * harm and should be fine even working with any ufs device.
78 * Return: 0 on success non-zero value on failure.
80 static int ufshcd_dwc_connection_setup(struct ufs_hba
*hba
)
82 static const struct ufshcd_dme_attr_val setup_attrs
[] = {
83 { UIC_ARG_MIB(T_CONNECTIONSTATE
), 0, DME_LOCAL
},
84 { UIC_ARG_MIB(N_DEVICEID
), 0, DME_LOCAL
},
85 { UIC_ARG_MIB(N_DEVICEID_VALID
), 0, DME_LOCAL
},
86 { UIC_ARG_MIB(T_PEERDEVICEID
), 1, DME_LOCAL
},
87 { UIC_ARG_MIB(T_PEERCPORTID
), 0, DME_LOCAL
},
88 { UIC_ARG_MIB(T_TRAFFICCLASS
), 0, DME_LOCAL
},
89 { UIC_ARG_MIB(T_CPORTFLAGS
), 0x6, DME_LOCAL
},
90 { UIC_ARG_MIB(T_CPORTMODE
), 1, DME_LOCAL
},
91 { UIC_ARG_MIB(T_CONNECTIONSTATE
), 1, DME_LOCAL
},
92 { UIC_ARG_MIB(T_CONNECTIONSTATE
), 0, DME_PEER
},
93 { UIC_ARG_MIB(N_DEVICEID
), 1, DME_PEER
},
94 { UIC_ARG_MIB(N_DEVICEID_VALID
), 1, DME_PEER
},
95 { UIC_ARG_MIB(T_PEERDEVICEID
), 1, DME_PEER
},
96 { UIC_ARG_MIB(T_PEERCPORTID
), 0, DME_PEER
},
97 { UIC_ARG_MIB(T_TRAFFICCLASS
), 0, DME_PEER
},
98 { UIC_ARG_MIB(T_CPORTFLAGS
), 0x6, DME_PEER
},
99 { UIC_ARG_MIB(T_CPORTMODE
), 1, DME_PEER
},
100 { UIC_ARG_MIB(T_CONNECTIONSTATE
), 1, DME_PEER
}
103 return ufshcd_dwc_dme_set_attrs(hba
, setup_attrs
, ARRAY_SIZE(setup_attrs
));
107 * ufshcd_dwc_link_startup_notify() - program clock divider.
108 * @hba: private structure pointer
109 * @status: Callback notify status
111 * Return: 0 on success, non-zero value on failure.
113 int ufshcd_dwc_link_startup_notify(struct ufs_hba
*hba
,
114 enum ufs_notify_change_status status
)
118 if (status
== PRE_CHANGE
) {
119 ufshcd_dwc_program_clk_div(hba
, DWC_UFS_REG_HCLKDIV_DIV_125
);
121 err
= ufshcd_vops_phy_initialization(hba
);
123 dev_err(hba
->dev
, "Phy setup failed (%d)\n", err
);
126 } else { /* POST_CHANGE */
127 err
= ufshcd_dwc_link_is_up(hba
);
129 dev_err(hba
->dev
, "Link is not up\n");
133 err
= ufshcd_dwc_connection_setup(hba
);
135 dev_err(hba
->dev
, "Connection setup failed (%d)\n",
142 EXPORT_SYMBOL(ufshcd_dwc_link_startup_notify
);
144 MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
145 MODULE_DESCRIPTION("UFS Host driver for Synopsys Designware Core");
146 MODULE_LICENSE("Dual BSD/GPL");