1 // SPDX-License-Identifier: GPL-2.0-only
5 * Maintainer: Jason Wessel <jason.wessel@windriver.com>
7 * Copyright (C) 2000-2001 VERITAS Software Corporation.
8 * Copyright (C) 2002-2004 Timesys Corporation
9 * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
10 * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
11 * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
12 * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
13 * Copyright (C) 2005-2009 Wind River Systems, Inc.
14 * Copyright (C) 2007 MontaVista Software, Inc.
15 * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
17 * Contributors at various stages not listed above:
18 * Jason Wessel ( jason.wessel@windriver.com )
19 * George Anzinger <george@mvista.com>
20 * Anurekh Saxena (anurekh.saxena@timesys.com)
21 * Lake Stevens Instrument Division (Glenn Engel)
22 * Jim Kingdon, Cygnus Support.
24 * Original KGDB stub: David Grothe <dave@gcom.com>,
25 * Tigran Aivazian <tigran@sco.com>
28 #include <linux/kernel.h>
29 #include <linux/sched/signal.h>
30 #include <linux/kgdb.h>
31 #include <linux/kdb.h>
32 #include <linux/serial_core.h>
33 #include <linux/reboot.h>
34 #include <linux/uaccess.h>
35 #include <asm/cacheflush.h>
36 #include <linux/unaligned.h>
37 #include "debug_core.h"
39 #define KGDB_MAX_THREAD_QUERY 17
41 /* Our I/O buffers. */
42 static char remcom_in_buffer
[BUFMAX
];
43 static char remcom_out_buffer
[BUFMAX
];
44 static int gdbstub_use_prev_in_buf
;
45 static int gdbstub_prev_in_buf_pos
;
47 /* Storage for the registers, in GDB format. */
48 static unsigned long gdb_regs
[(NUMREGBYTES
+
49 sizeof(unsigned long) - 1) /
50 sizeof(unsigned long)];
53 * GDB remote protocol parser:
56 #ifdef CONFIG_KGDB_KDB
57 static int gdbstub_read_wait(void)
62 if (unlikely(gdbstub_use_prev_in_buf
)) {
63 if (gdbstub_prev_in_buf_pos
< gdbstub_use_prev_in_buf
)
64 return remcom_in_buffer
[gdbstub_prev_in_buf_pos
++];
66 gdbstub_use_prev_in_buf
= 0;
69 /* poll any additional I/O interfaces that are defined */
71 for (i
= 0; kdb_poll_funcs
[i
] != NULL
; i
++) {
72 ret
= kdb_poll_funcs
[i
]();
79 static int gdbstub_read_wait(void)
81 int ret
= dbg_io_ops
->read_char();
82 while (ret
== NO_POLL_CHAR
)
83 ret
= dbg_io_ops
->read_char();
87 /* scan for the sequence $<data>#<checksum> */
88 static void get_packet(char *buffer
)
90 unsigned char checksum
;
91 unsigned char xmitcsum
;
97 * Spin and wait around for the start character, ignore all
100 while ((ch
= (gdbstub_read_wait())) != '$')
110 * now, read until a # or end of buffer is found:
112 while (count
< (BUFMAX
- 1)) {
113 ch
= gdbstub_read_wait();
116 checksum
= checksum
+ ch
;
122 xmitcsum
= hex_to_bin(gdbstub_read_wait()) << 4;
123 xmitcsum
+= hex_to_bin(gdbstub_read_wait());
125 if (checksum
!= xmitcsum
)
126 /* failed checksum */
127 dbg_io_ops
->write_char('-');
129 /* successful transfer */
130 dbg_io_ops
->write_char('+');
131 if (dbg_io_ops
->flush
)
135 } while (checksum
!= xmitcsum
);
139 * Send the packet in buffer.
140 * Check for gdb connection if asked for.
142 static void put_packet(char *buffer
)
144 unsigned char checksum
;
149 * $<packet info>#<checksum>.
152 dbg_io_ops
->write_char('$');
156 while ((ch
= buffer
[count
])) {
157 dbg_io_ops
->write_char(ch
);
162 dbg_io_ops
->write_char('#');
163 dbg_io_ops
->write_char(hex_asc_hi(checksum
));
164 dbg_io_ops
->write_char(hex_asc_lo(checksum
));
165 if (dbg_io_ops
->flush
)
168 /* Now see what we get in reply. */
169 ch
= gdbstub_read_wait();
172 ch
= gdbstub_read_wait();
174 /* If we get an ACK, we are done. */
179 * If we get the start of another packet, this means
180 * that GDB is attempting to reconnect. We will NAK
181 * the packet being sent, and stop trying to send this
185 dbg_io_ops
->write_char('-');
186 if (dbg_io_ops
->flush
)
193 static char gdbmsgbuf
[BUFMAX
+ 1];
195 void gdbstub_msg_write(const char *s
, int len
)
207 /* Fill and send buffers... */
209 bufptr
= gdbmsgbuf
+ 1;
211 /* Calculate how many this time */
212 if ((len
<< 1) > (BUFMAX
- 2))
213 wcount
= (BUFMAX
- 2) >> 1;
217 /* Pack in hex chars */
218 for (i
= 0; i
< wcount
; i
++)
219 bufptr
= hex_byte_pack(bufptr
, s
[i
]);
227 put_packet(gdbmsgbuf
);
232 * Convert the memory pointed to by mem into hex, placing result in
233 * buf. Return a pointer to the last char put in buf (null). May
236 char *kgdb_mem2hex(char *mem
, char *buf
, int count
)
242 * We use the upper half of buf as an intermediate buffer for the
243 * raw memory copy. Hex conversion will work against this one.
247 err
= copy_from_kernel_nofault(tmp
, mem
, count
);
251 buf
= hex_byte_pack(buf
, *tmp
);
261 * Convert the hex array pointed to by buf into binary to be placed in
262 * mem. Return a pointer to the character AFTER the last byte
263 * written. May return an error.
265 int kgdb_hex2mem(char *buf
, char *mem
, int count
)
271 * We use the upper half of buf as an intermediate buffer for the
272 * raw memory that is converted from hex.
274 tmp_raw
= buf
+ count
* 2;
276 tmp_hex
= tmp_raw
- 1;
277 while (tmp_hex
>= buf
) {
279 *tmp_raw
= hex_to_bin(*tmp_hex
--);
280 *tmp_raw
|= hex_to_bin(*tmp_hex
--) << 4;
283 return copy_to_kernel_nofault(mem
, tmp_raw
, count
);
287 * While we find nice hex chars, build a long_val.
288 * Return number of chars processed.
290 int kgdb_hex2long(char **ptr
, unsigned long *long_val
)
303 hex_val
= hex_to_bin(**ptr
);
307 *long_val
= (*long_val
<< 4) | hex_val
;
313 *long_val
= -*long_val
;
319 * Copy the binary array pointed to by buf into mem. Fix $, #, and
320 * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
321 * The input buf is overwritten with the result to write to mem.
323 static int kgdb_ebin2mem(char *buf
, char *mem
, int count
)
328 while (count
-- > 0) {
331 c
[size
] = *buf
++ ^ 0x20;
335 return copy_to_kernel_nofault(mem
, c
, size
);
338 #if DBG_MAX_REG_NUM > 0
339 void pt_regs_to_gdb_regs(unsigned long *gdb_regs
, struct pt_regs
*regs
)
343 char *ptr
= (char *)gdb_regs
;
345 for (i
= 0; i
< DBG_MAX_REG_NUM
; i
++) {
346 dbg_get_reg(i
, ptr
+ idx
, regs
);
347 idx
+= dbg_reg_def
[i
].size
;
351 void gdb_regs_to_pt_regs(unsigned long *gdb_regs
, struct pt_regs
*regs
)
355 char *ptr
= (char *)gdb_regs
;
357 for (i
= 0; i
< DBG_MAX_REG_NUM
; i
++) {
358 dbg_set_reg(i
, ptr
+ idx
, regs
);
359 idx
+= dbg_reg_def
[i
].size
;
362 #endif /* DBG_MAX_REG_NUM > 0 */
364 /* Write memory due to an 'M' or 'X' packet. */
365 static int write_mem_msg(int binary
)
367 char *ptr
= &remcom_in_buffer
[1];
369 unsigned long length
;
372 if (kgdb_hex2long(&ptr
, &addr
) > 0 && *(ptr
++) == ',' &&
373 kgdb_hex2long(&ptr
, &length
) > 0 && *(ptr
++) == ':') {
375 err
= kgdb_ebin2mem(ptr
, (char *)addr
, length
);
377 err
= kgdb_hex2mem(ptr
, (char *)addr
, length
);
380 if (CACHE_FLUSH_IS_SAFE
)
381 flush_icache_range(addr
, addr
+ length
);
388 static void error_packet(char *pkt
, int error
)
392 pkt
[1] = hex_asc
[(error
/ 10)];
393 pkt
[2] = hex_asc
[(error
% 10)];
398 * Thread ID accessors. We represent a flat TID space to GDB, where
399 * the per CPU idle threads (which under Linux all have PID 0) are
400 * remapped to negative TIDs.
403 #define BUF_THREAD_ID_SIZE 8
405 static char *pack_threadid(char *pkt
, unsigned char *id
)
407 unsigned char *limit
;
410 limit
= id
+ (BUF_THREAD_ID_SIZE
/ 2);
412 if (!lzero
|| *id
!= 0) {
413 pkt
= hex_byte_pack(pkt
, *id
);
420 pkt
= hex_byte_pack(pkt
, 0);
425 static void int_to_threadref(unsigned char *id
, int value
)
427 put_unaligned_be32(value
, id
);
430 static struct task_struct
*getthread(struct pt_regs
*regs
, int tid
)
433 * Non-positive TIDs are remapped to the cpu shadow information
435 if (tid
== 0 || tid
== -1)
436 tid
= -atomic_read(&kgdb_active
) - 2;
437 if (tid
< -1 && tid
> -NR_CPUS
- 2) {
438 if (kgdb_info
[-tid
- 2].task
)
439 return kgdb_info
[-tid
- 2].task
;
441 return idle_task(-tid
- 2);
444 printk(KERN_ERR
"KGDB: Internal thread select error\n");
450 * find_task_by_pid_ns() does not take the tasklist lock anymore
451 * but is nicely RCU locked - hence is a pretty resilient
454 return find_task_by_pid_ns(tid
, &init_pid_ns
);
459 * Remap normal tasks to their real PID,
460 * CPU shadow threads are mapped to -CPU - 2
462 static inline int shadow_pid(int realpid
)
467 return -raw_smp_processor_id() - 2;
471 * All the functions that start with gdb_cmd are the various
472 * operations to implement the handlers for the gdbserial protocol
473 * where KGDB is communicating with an external debugger
476 /* Handle the '?' status packets */
477 static void gdb_cmd_status(struct kgdb_state
*ks
)
480 * We know that this packet is only sent
481 * during initial connect. So to be safe,
482 * we clear out our breakpoints now in case
483 * GDB is reconnecting.
485 dbg_remove_all_break();
487 remcom_out_buffer
[0] = 'S';
488 hex_byte_pack(&remcom_out_buffer
[1], ks
->signo
);
491 static void gdb_get_regs_helper(struct kgdb_state
*ks
)
493 struct task_struct
*thread
;
494 void *local_debuggerinfo
;
497 thread
= kgdb_usethread
;
499 thread
= kgdb_info
[ks
->cpu
].task
;
500 local_debuggerinfo
= kgdb_info
[ks
->cpu
].debuggerinfo
;
502 local_debuggerinfo
= NULL
;
503 for_each_online_cpu(i
) {
505 * Try to find the task on some other
506 * or possibly this node if we do not
507 * find the matching task then we try
508 * to approximate the results.
510 if (thread
== kgdb_info
[i
].task
)
511 local_debuggerinfo
= kgdb_info
[i
].debuggerinfo
;
516 * All threads that don't have debuggerinfo should be
517 * in schedule() sleeping, since all other CPUs
518 * are in kgdb_wait, and thus have debuggerinfo.
520 if (local_debuggerinfo
) {
521 pt_regs_to_gdb_regs(gdb_regs
, local_debuggerinfo
);
524 * Pull stuff saved during switch_to; nothing
525 * else is accessible (or even particularly
528 * This should be enough for a stack trace.
530 sleeping_thread_to_gdb_regs(gdb_regs
, thread
);
534 /* Handle the 'g' get registers request */
535 static void gdb_cmd_getregs(struct kgdb_state
*ks
)
537 gdb_get_regs_helper(ks
);
538 kgdb_mem2hex((char *)gdb_regs
, remcom_out_buffer
, NUMREGBYTES
);
541 /* Handle the 'G' set registers request */
542 static void gdb_cmd_setregs(struct kgdb_state
*ks
)
544 kgdb_hex2mem(&remcom_in_buffer
[1], (char *)gdb_regs
, NUMREGBYTES
);
546 if (kgdb_usethread
&& kgdb_usethread
!= current
) {
547 error_packet(remcom_out_buffer
, -EINVAL
);
549 gdb_regs_to_pt_regs(gdb_regs
, ks
->linux_regs
);
550 strcpy(remcom_out_buffer
, "OK");
554 /* Handle the 'm' memory read bytes */
555 static void gdb_cmd_memread(struct kgdb_state
*ks
)
557 char *ptr
= &remcom_in_buffer
[1];
558 unsigned long length
;
562 if (kgdb_hex2long(&ptr
, &addr
) > 0 && *ptr
++ == ',' &&
563 kgdb_hex2long(&ptr
, &length
) > 0) {
564 err
= kgdb_mem2hex((char *)addr
, remcom_out_buffer
, length
);
566 error_packet(remcom_out_buffer
, -EINVAL
);
568 error_packet(remcom_out_buffer
, -EINVAL
);
572 /* Handle the 'M' memory write bytes */
573 static void gdb_cmd_memwrite(struct kgdb_state
*ks
)
575 int err
= write_mem_msg(0);
578 error_packet(remcom_out_buffer
, err
);
580 strcpy(remcom_out_buffer
, "OK");
583 #if DBG_MAX_REG_NUM > 0
584 static char *gdb_hex_reg_helper(int regnum
, char *out
)
589 for (i
= 0; i
< regnum
; i
++)
590 offset
+= dbg_reg_def
[i
].size
;
591 return kgdb_mem2hex((char *)gdb_regs
+ offset
, out
,
592 dbg_reg_def
[i
].size
);
595 /* Handle the 'p' individual register get */
596 static void gdb_cmd_reg_get(struct kgdb_state
*ks
)
598 unsigned long regnum
;
599 char *ptr
= &remcom_in_buffer
[1];
601 kgdb_hex2long(&ptr
, ®num
);
602 if (regnum
>= DBG_MAX_REG_NUM
) {
603 error_packet(remcom_out_buffer
, -EINVAL
);
606 gdb_get_regs_helper(ks
);
607 gdb_hex_reg_helper(regnum
, remcom_out_buffer
);
610 /* Handle the 'P' individual register set */
611 static void gdb_cmd_reg_set(struct kgdb_state
*ks
)
613 unsigned long regnum
;
614 char *ptr
= &remcom_in_buffer
[1];
617 kgdb_hex2long(&ptr
, ®num
);
619 !(!kgdb_usethread
|| kgdb_usethread
== current
) ||
620 !dbg_get_reg(regnum
, gdb_regs
, ks
->linux_regs
)) {
621 error_packet(remcom_out_buffer
, -EINVAL
);
624 memset(gdb_regs
, 0, sizeof(gdb_regs
));
625 while (i
< sizeof(gdb_regs
) * 2)
626 if (hex_to_bin(ptr
[i
]) >= 0)
631 kgdb_hex2mem(ptr
, (char *)gdb_regs
, i
);
632 dbg_set_reg(regnum
, gdb_regs
, ks
->linux_regs
);
633 strcpy(remcom_out_buffer
, "OK");
635 #endif /* DBG_MAX_REG_NUM > 0 */
637 /* Handle the 'X' memory binary write bytes */
638 static void gdb_cmd_binwrite(struct kgdb_state
*ks
)
640 int err
= write_mem_msg(1);
643 error_packet(remcom_out_buffer
, err
);
645 strcpy(remcom_out_buffer
, "OK");
648 /* Handle the 'D' or 'k', detach or kill packets */
649 static void gdb_cmd_detachkill(struct kgdb_state
*ks
)
653 /* The detach case */
654 if (remcom_in_buffer
[0] == 'D') {
655 error
= dbg_remove_all_break();
657 error_packet(remcom_out_buffer
, error
);
659 strcpy(remcom_out_buffer
, "OK");
662 put_packet(remcom_out_buffer
);
665 * Assume the kill case, with no exit code checking,
666 * trying to force detach the debugger:
668 dbg_remove_all_break();
673 /* Handle the 'R' reboot packets */
674 static int gdb_cmd_reboot(struct kgdb_state
*ks
)
676 /* For now, only honor R0 */
677 if (strcmp(remcom_in_buffer
, "R0") == 0) {
678 printk(KERN_CRIT
"Executing emergency reboot\n");
679 strcpy(remcom_out_buffer
, "OK");
680 put_packet(remcom_out_buffer
);
683 * Execution should not return from
684 * machine_emergency_restart()
686 machine_emergency_restart();
694 /* Handle the 'q' query packets */
695 static void gdb_cmd_query(struct kgdb_state
*ks
)
697 struct task_struct
*g
;
698 struct task_struct
*p
;
699 unsigned char thref
[BUF_THREAD_ID_SIZE
];
705 switch (remcom_in_buffer
[1]) {
708 if (memcmp(remcom_in_buffer
+ 2, "ThreadInfo", 10))
712 remcom_out_buffer
[0] = 'm';
713 ptr
= remcom_out_buffer
+ 1;
714 if (remcom_in_buffer
[1] == 'f') {
715 /* Each cpu is a shadow thread */
716 for_each_online_cpu(cpu
) {
718 int_to_threadref(thref
, -cpu
- 2);
719 ptr
= pack_threadid(ptr
, thref
);
725 for_each_process_thread(g
, p
) {
726 if (i
>= ks
->thr_query
&& !finished
) {
727 int_to_threadref(thref
, p
->pid
);
728 ptr
= pack_threadid(ptr
, thref
);
731 if (ks
->thr_query
% KGDB_MAX_THREAD_QUERY
== 0)
741 /* Current thread id */
742 strcpy(remcom_out_buffer
, "QC");
743 ks
->threadid
= shadow_pid(current
->pid
);
744 int_to_threadref(thref
, ks
->threadid
);
745 pack_threadid(remcom_out_buffer
+ 2, thref
);
748 if (memcmp(remcom_in_buffer
+ 1, "ThreadExtraInfo,", 16))
752 ptr
= remcom_in_buffer
+ 17;
753 kgdb_hex2long(&ptr
, &ks
->threadid
);
754 if (!getthread(ks
->linux_regs
, ks
->threadid
)) {
755 error_packet(remcom_out_buffer
, -EINVAL
);
758 if ((int)ks
->threadid
> 0) {
759 kgdb_mem2hex(getthread(ks
->linux_regs
,
761 remcom_out_buffer
, 16);
763 static char tmpstr
[23 + BUF_THREAD_ID_SIZE
];
765 sprintf(tmpstr
, "shadowCPU%d",
766 (int)(-ks
->threadid
- 2));
767 kgdb_mem2hex(tmpstr
, remcom_out_buffer
, strlen(tmpstr
));
770 #ifdef CONFIG_KGDB_KDB
772 if (strncmp(remcom_in_buffer
, "qRcmd,", 6) == 0) {
773 int len
= strlen(remcom_in_buffer
+ 6);
775 if ((len
% 2) != 0) {
776 strcpy(remcom_out_buffer
, "E01");
779 kgdb_hex2mem(remcom_in_buffer
+ 6,
780 remcom_out_buffer
, len
);
782 remcom_out_buffer
[len
++] = 0;
784 kdb_common_init_state(ks
);
785 kdb_parse(remcom_out_buffer
);
786 kdb_common_deinit_state();
788 strcpy(remcom_out_buffer
, "OK");
792 #ifdef CONFIG_HAVE_ARCH_KGDB_QXFER_PKT
794 if (!strncmp(remcom_in_buffer
, "qSupported:", 11))
795 strcpy(remcom_out_buffer
, kgdb_arch_gdb_stub_feature
);
798 if (!strncmp(remcom_in_buffer
, "qXfer:", 6))
799 kgdb_arch_handle_qxfer_pkt(remcom_in_buffer
,
808 /* Handle the 'H' task query packets */
809 static void gdb_cmd_task(struct kgdb_state
*ks
)
811 struct task_struct
*thread
;
814 switch (remcom_in_buffer
[1]) {
816 ptr
= &remcom_in_buffer
[2];
817 kgdb_hex2long(&ptr
, &ks
->threadid
);
818 thread
= getthread(ks
->linux_regs
, ks
->threadid
);
819 if (!thread
&& ks
->threadid
> 0) {
820 error_packet(remcom_out_buffer
, -EINVAL
);
823 kgdb_usethread
= thread
;
824 ks
->kgdb_usethreadid
= ks
->threadid
;
825 strcpy(remcom_out_buffer
, "OK");
828 ptr
= &remcom_in_buffer
[2];
829 kgdb_hex2long(&ptr
, &ks
->threadid
);
831 kgdb_contthread
= NULL
;
833 thread
= getthread(ks
->linux_regs
, ks
->threadid
);
834 if (!thread
&& ks
->threadid
> 0) {
835 error_packet(remcom_out_buffer
, -EINVAL
);
838 kgdb_contthread
= thread
;
840 strcpy(remcom_out_buffer
, "OK");
845 /* Handle the 'T' thread query packets */
846 static void gdb_cmd_thread(struct kgdb_state
*ks
)
848 char *ptr
= &remcom_in_buffer
[1];
849 struct task_struct
*thread
;
851 kgdb_hex2long(&ptr
, &ks
->threadid
);
852 thread
= getthread(ks
->linux_regs
, ks
->threadid
);
854 strcpy(remcom_out_buffer
, "OK");
856 error_packet(remcom_out_buffer
, -EINVAL
);
859 /* Handle the 'z' or 'Z' breakpoint remove or set packets */
860 static void gdb_cmd_break(struct kgdb_state
*ks
)
863 * Since GDB-5.3, it's been drafted that '0' is a software
864 * breakpoint, '1' is a hardware breakpoint, so let's do that.
866 char *bpt_type
= &remcom_in_buffer
[1];
867 char *ptr
= &remcom_in_buffer
[2];
869 unsigned long length
;
872 if (arch_kgdb_ops
.set_hw_breakpoint
&& *bpt_type
>= '1') {
877 if (*bpt_type
!= '0' && *bpt_type
!= '1')
883 * Test if this is a hardware breakpoint, and
886 if (*bpt_type
== '1' && !(arch_kgdb_ops
.flags
& KGDB_HW_BREAKPOINT
))
890 if (*(ptr
++) != ',') {
891 error_packet(remcom_out_buffer
, -EINVAL
);
894 if (!kgdb_hex2long(&ptr
, &addr
)) {
895 error_packet(remcom_out_buffer
, -EINVAL
);
898 if (*(ptr
++) != ',' ||
899 !kgdb_hex2long(&ptr
, &length
)) {
900 error_packet(remcom_out_buffer
, -EINVAL
);
904 if (remcom_in_buffer
[0] == 'Z' && *bpt_type
== '0')
905 error
= dbg_set_sw_break(addr
);
906 else if (remcom_in_buffer
[0] == 'z' && *bpt_type
== '0')
907 error
= dbg_remove_sw_break(addr
);
908 else if (remcom_in_buffer
[0] == 'Z')
909 error
= arch_kgdb_ops
.set_hw_breakpoint(addr
,
910 (int)length
, *bpt_type
- '0');
911 else if (remcom_in_buffer
[0] == 'z')
912 error
= arch_kgdb_ops
.remove_hw_breakpoint(addr
,
913 (int) length
, *bpt_type
- '0');
916 strcpy(remcom_out_buffer
, "OK");
918 error_packet(remcom_out_buffer
, error
);
921 /* Handle the 'C' signal / exception passing packets */
922 static int gdb_cmd_exception_pass(struct kgdb_state
*ks
)
924 /* C09 == pass exception
925 * C15 == detach kgdb, pass exception
927 if (remcom_in_buffer
[1] == '0' && remcom_in_buffer
[2] == '9') {
929 ks
->pass_exception
= 1;
930 remcom_in_buffer
[0] = 'c';
932 } else if (remcom_in_buffer
[1] == '1' && remcom_in_buffer
[2] == '5') {
934 ks
->pass_exception
= 1;
935 remcom_in_buffer
[0] = 'D';
936 dbg_remove_all_break();
941 gdbstub_msg_write("KGDB only knows signal 9 (pass)"
942 " and 15 (pass and disconnect)\n"
943 "Executing a continue without signal passing\n", 0);
944 remcom_in_buffer
[0] = 'c';
947 /* Indicate fall through */
952 * This function performs all gdbserial command processing
954 int gdb_serial_stub(struct kgdb_state
*ks
)
959 /* Initialize comm buffer and globals. */
960 memset(remcom_out_buffer
, 0, sizeof(remcom_out_buffer
));
961 kgdb_usethread
= kgdb_info
[ks
->cpu
].task
;
962 ks
->kgdb_usethreadid
= shadow_pid(kgdb_info
[ks
->cpu
].task
->pid
);
963 ks
->pass_exception
= 0;
965 if (kgdb_connected
) {
966 unsigned char thref
[BUF_THREAD_ID_SIZE
];
969 /* Reply to host that an exception has occurred */
970 ptr
= remcom_out_buffer
;
972 ptr
= hex_byte_pack(ptr
, ks
->signo
);
973 ptr
+= strlen(strcpy(ptr
, "thread:"));
974 int_to_threadref(thref
, shadow_pid(current
->pid
));
975 ptr
= pack_threadid(ptr
, thref
);
977 put_packet(remcom_out_buffer
);
983 /* Clear the out buffer. */
984 memset(remcom_out_buffer
, 0, sizeof(remcom_out_buffer
));
986 get_packet(remcom_in_buffer
);
988 switch (remcom_in_buffer
[0]) {
989 case '?': /* gdbserial status */
992 case 'g': /* return the value of the CPU registers */
995 case 'G': /* set the value of the CPU registers - return OK */
998 case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
1001 case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1002 gdb_cmd_memwrite(ks
);
1004 #if DBG_MAX_REG_NUM > 0
1005 case 'p': /* pXX Return gdb register XX (in hex) */
1006 gdb_cmd_reg_get(ks
);
1008 case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
1009 gdb_cmd_reg_set(ks
);
1011 #endif /* DBG_MAX_REG_NUM > 0 */
1012 case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1013 gdb_cmd_binwrite(ks
);
1015 /* kill or detach. KGDB should treat this like a
1018 case 'D': /* Debugger detach */
1019 case 'k': /* Debugger detach via kill */
1020 gdb_cmd_detachkill(ks
);
1021 goto default_handle
;
1022 case 'R': /* Reboot */
1023 if (gdb_cmd_reboot(ks
))
1024 goto default_handle
;
1026 case 'q': /* query command */
1029 case 'H': /* task related */
1032 case 'T': /* Query thread status */
1035 case 'z': /* Break point remove */
1036 case 'Z': /* Break point set */
1039 #ifdef CONFIG_KGDB_KDB
1040 case '3': /* Escape into back into kdb */
1041 if (remcom_in_buffer
[1] == '\0') {
1042 gdb_cmd_detachkill(ks
);
1043 return DBG_PASS_EVENT
;
1047 case 'C': /* Exception passing */
1048 tmp
= gdb_cmd_exception_pass(ks
);
1050 goto default_handle
;
1053 fallthrough
; /* on tmp < 0 */
1054 case 'c': /* Continue packet */
1055 case 's': /* Single step packet */
1056 if (kgdb_contthread
&& kgdb_contthread
!= current
) {
1057 /* Can't switch threads in kgdb */
1058 error_packet(remcom_out_buffer
, -EINVAL
);
1061 fallthrough
; /* to default processing */
1064 error
= kgdb_arch_handle_exception(ks
->ex_vector
,
1071 * Leave cmd processing on error, detach,
1072 * kill, continue, or single step.
1074 if (error
>= 0 || remcom_in_buffer
[0] == 'D' ||
1075 remcom_in_buffer
[0] == 'k') {
1082 /* reply to the request */
1083 put_packet(remcom_out_buffer
);
1087 if (ks
->pass_exception
)
1092 int gdbstub_state(struct kgdb_state
*ks
, char *cmd
)
1098 error
= kgdb_arch_handle_exception(ks
->ex_vector
,
1107 strscpy(remcom_in_buffer
, cmd
, sizeof(remcom_in_buffer
));
1110 strscpy(remcom_in_buffer
, cmd
, sizeof(remcom_in_buffer
));
1111 gdbstub_use_prev_in_buf
= strlen(remcom_in_buffer
);
1112 gdbstub_prev_in_buf_pos
= 0;
1115 dbg_io_ops
->write_char('+');
1116 put_packet(remcom_out_buffer
);
1121 * gdbstub_exit - Send an exit message to GDB
1122 * @status: The exit code to report.
1124 void gdbstub_exit(int status
)
1126 unsigned char checksum
, ch
, buffer
[3];
1129 if (!kgdb_connected
)
1133 if (!dbg_io_ops
|| dbg_kdb_mode
)
1137 buffer
[1] = hex_asc_hi(status
);
1138 buffer
[2] = hex_asc_lo(status
);
1140 dbg_io_ops
->write_char('$');
1143 for (loop
= 0; loop
< 3; loop
++) {
1146 dbg_io_ops
->write_char(ch
);
1149 dbg_io_ops
->write_char('#');
1150 dbg_io_ops
->write_char(hex_asc_hi(checksum
));
1151 dbg_io_ops
->write_char(hex_asc_lo(checksum
));
1153 /* make sure the output is flushed, lest the bootloader clobber it */
1154 if (dbg_io_ops
->flush
)
1155 dbg_io_ops
->flush();