arch/arc/kernel/intc-arcv2.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
   4  */
   5
   6 #include <linux/interrupt.h>
   7 #include <linux/module.h>
   8 #include <linux/of.h>
   9 #include <linux/irqdomain.h>
  10 #include <linux/irqchip.h>
  11 #include <asm/irq.h>
  12
  13 #define NR_EXCEPTIONS   16
  14
  15 struct bcr_irq_arcv2 {
  16 #ifdef CONFIG_CPU_BIG_ENDIAN
  17         unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
  18 #else
  19         unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
  20 #endif
  21 };
  22
  23 /*
  24  * Early Hardware specific Interrupt setup
  25  * -Called very early (start_kernel -> setup_arch -> setup_processor)
  26  * -Platform Independent (must for any ARC Core)
  27  * -Needed for each CPU (hence not foldable into init_IRQ)
  28  */
  29 void arc_init_IRQ(void)
  30 {
  31         unsigned int tmp, irq_prio, i;
  32         struct bcr_irq_arcv2 irq_bcr;
  33
  34         struct aux_irq_ctrl {
  35 #ifdef CONFIG_CPU_BIG_ENDIAN
  36                 unsigned int res3:18, save_idx_regs:1, res2:1,
  37                              save_u_to_u:1, save_lp_regs:1, save_blink:1,
  38                              res:4, save_nr_gpr_pairs:5;
  39 #else
  40                 unsigned int save_nr_gpr_pairs:5, res:4,
  41                              save_blink:1, save_lp_regs:1, save_u_to_u:1,
  42                              res2:1, save_idx_regs:1, res3:18;
  43 #endif
  44         } ictrl;
  45
  46         *(unsigned int *)&ictrl = 0;
  47
  48 #ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
  49         ictrl.save_nr_gpr_pairs = 6;    /* r0 to r11 (r12 saved manually) */
  50         ictrl.save_blink = 1;
  51         ictrl.save_lp_regs = 1;         /* LP_COUNT, LP_START, LP_END */
  52         ictrl.save_u_to_u = 0;          /* user ctxt saved on kernel stack */
  53         ictrl.save_idx_regs = 1;        /* JLI, LDI, EI */
  54 #endif
  55
  56         WRITE_AUX(AUX_IRQ_CTRL, ictrl);
  57
  58         /*
  59          * ARCv2 core intc provides multiple interrupt priorities (up to 16).
  60          * Typical builds though have only two levels (0-high, 1-low)
  61          * Linux by default uses lower prio 1 for most irqs, reserving 0 for
  62          * NMI style interrupts in future (say perf)
  63          */
  64
  65         READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
  66
  67         irq_prio = irq_bcr.prio;        /* Encoded as N-1 for N levels */
  68         pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
  69                 irq_prio + 1, ARCV2_IRQ_DEF_PRIO,
  70                 irq_bcr.firq ? " FIRQ (not used)":"");
  71
  72         /*
  73          * Set a default priority for all available interrupts to prevent
  74          * switching of register banks if Fast IRQ and multiple register banks
  75          * are supported by CPU.
  76          * Also disable private-per-core IRQ lines so faulty external HW won't
  77          * trigger interrupt that kernel is not ready to handle.
  78          */
  79         for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) {
  80                 write_aux_reg(AUX_IRQ_SELECT, i);
  81                 write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
  82
  83                 /*
  84                  * Only mask cpu private IRQs here.
  85                  * "common" interrupts are masked at IDU, otherwise it would
  86                  * need to be unmasked at each cpu, with IPIs
  87                  */
  88                 if (i < FIRST_EXT_IRQ)
  89                         write_aux_reg(AUX_IRQ_ENABLE, 0);
  90         }
  91
  92         /* setup status32, don't enable intr yet as kernel doesn't want */
  93         tmp = read_aux_reg(ARC_REG_STATUS32);
  94         tmp |= ARCV2_IRQ_DEF_PRIO << 1;
  95         tmp &= ~STATUS_IE_MASK;
  96         asm volatile("kflag %0  \n"::"r"(tmp));
  97 }
  98
  99 static void arcv2_irq_mask(struct irq_data *data)
 100 {
 101         write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 102         write_aux_reg(AUX_IRQ_ENABLE, 0);
 103 }
 104
 105 static void arcv2_irq_unmask(struct irq_data *data)
 106 {
 107         write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 108         write_aux_reg(AUX_IRQ_ENABLE, 1);
 109 }
 110
 111 static void arcv2_irq_enable(struct irq_data *data)
 112 {
 113         /* set default priority */
 114         write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 115         write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
 116
 117         /*
 118          * hw auto enables (linux unmask) all by default
 119          * So no need to do IRQ_ENABLE here
 120          * XXX: However OSCI LAN need it
 121          */
 122         write_aux_reg(AUX_IRQ_ENABLE, 1);
 123 }
 124
 125 static struct irq_chip arcv2_irq_chip = {
 126         .name           = "ARCv2 core Intc",
 127         .irq_mask       = arcv2_irq_mask,
 128         .irq_unmask     = arcv2_irq_unmask,
 129         .irq_enable     = arcv2_irq_enable
 130 };
 131
 132 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
 133                          irq_hw_number_t hw)
 134 {
 135         /*
 136          * core intc IRQs [16, 23]:
 137          * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
 138          */
 139         if (hw < FIRST_EXT_IRQ) {
 140                 /*
 141                  * A subsequent request_percpu_irq() fails if percpu_devid is
 142                  * not set. That in turns sets NOAUTOEN, meaning each core needs
 143                  * to call enable_percpu_irq()
 144                  */
 145                 irq_set_percpu_devid(irq);
 146                 irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
 147         } else {
 148                 irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
 149         }
 150
 151         return 0;
 152 }
 153
 154 static const struct irq_domain_ops arcv2_irq_ops = {
 155         .xlate = irq_domain_xlate_onecell,
 156         .map = arcv2_irq_map,
 157 };
 158
 159
 160 static int __init
 161 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 162 {
 163         struct irq_domain *root_domain;
 164         struct bcr_irq_arcv2 irq_bcr;
 165         unsigned int nr_cpu_irqs;
 166
 167         READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
 168         nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS;
 169
 170         if (parent)
 171                 panic("DeviceTree incore intc not a root irq controller\n");
 172
 173         root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
 174         if (!root_domain)
 175                 panic("root irq domain not avail\n");
 176
 177         /*
 178          * Needed for primary domain lookup to succeed
 179          * This is a primary irqchip, and can never have a parent
 180          */
 181         irq_set_default_host(root_domain);
 182
 183 #ifdef CONFIG_SMP
 184         irq_create_mapping(root_domain, IPI_IRQ);
 185 #endif
 186         irq_create_mapping(root_domain, SOFTIRQ_IRQ);
 187
 188         return 0;
 189 }
 190
 191 IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);