?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
accel/qaic: Add AIC200 support
[drm/drm-misc.git] / arch / mips / alchemy / devboards / db1300.c
blobd377e043b49f86539b88fd6f79c5395f1a42278d
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * DBAu1300 init and platform device setup.
4 *
5 * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
6 */
7
8 #include <linux/clk.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/gpio.h>
11 #include <linux/gpio_keys.h>
12 #include <linux/init.h>
13 #include <linux/input.h> /* KEY_* codes */
14 #include <linux/i2c.h>
15 #include <linux/io.h>
16 #include <linux/leds.h>
17 #include <linux/interrupt.h>
18 #include <linux/ata_platform.h>
19 #include <linux/mmc/host.h>
20 #include <linux/mtd/mtd.h>
21 #include <linux/mtd/platnand.h>
22 #include <linux/platform_device.h>
23 #include <linux/smsc911x.h>
24 #include <linux/wm97xx.h>
25
26 #include <asm/mach-au1x00/au1000.h>
27 #include <asm/mach-au1x00/gpio-au1300.h>
28 #include <asm/mach-au1x00/au1100_mmc.h>
29 #include <asm/mach-au1x00/au1200fb.h>
30 #include <asm/mach-au1x00/au1xxx_dbdma.h>
31 #include <asm/mach-au1x00/au1xxx_psc.h>
32 #include <asm/mach-db1x00/bcsr.h>
33 #include <asm/mach-au1x00/prom.h>
34
35 #include "platform.h"
36
37 /* FPGA (external mux) interrupt sources */
38 #define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1)
39 #define DB1300_IDE_INT (DB1300_FIRST_INT + 0)
40 #define DB1300_ETH_INT (DB1300_FIRST_INT + 1)
41 #define DB1300_CF_INT (DB1300_FIRST_INT + 2)
42 #define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4)
43 #define DB1300_HDMI_INT (DB1300_FIRST_INT + 5)
44 #define DB1300_DC_INT (DB1300_FIRST_INT + 6)
45 #define DB1300_FLASH_INT (DB1300_FIRST_INT + 7)
46 #define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8)
47 #define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9)
48 #define DB1300_AC97_INT (DB1300_FIRST_INT + 10)
49 #define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11)
50 #define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12)
51 #define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13)
52 #define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14)
53 #define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
54 #define DB1300_LAST_INT (DB1300_FIRST_INT + 15)
55
56 /* SMSC9210 CS */
57 #define DB1300_ETH_PHYS_ADDR 0x19000000
58 #define DB1300_ETH_PHYS_END 0x197fffff
59
60 /* ATA CS */
61 #define DB1300_IDE_PHYS_ADDR 0x18800000
62 #define DB1300_IDE_REG_SHIFT 5
63 #define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT)
64
65 /* NAND CS */
66 #define DB1300_NAND_PHYS_ADDR 0x20000000
67 #define DB1300_NAND_PHYS_END 0x20000fff
68
69
70 static struct i2c_board_info db1300_i2c_devs[] __initdata = {
71 { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */
72 { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
73 };
74
75 /* multifunction pins to assign to GPIO controller */
76 static int db1300_gpio_pins[] __initdata = {
77 AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
78 AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
79 AU1300_PIN_EXTCLK1,
80 -1, /* terminator */
81 };
82
83 /* multifunction pins to assign to device functions */
84 static int db1300_dev_pins[] __initdata = {
85 /* wake-from-str pins 0-3 */
86 AU1300_PIN_WAKE0,
87 /* external clock sources for PSC0 */
88 AU1300_PIN_EXTCLK0,
89 /* 8bit MMC interface on SD0: 6-9 */
90 AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
91 AU1300_PIN_SD0DAT7,
92 /* UART1 pins: 11-18 */
93 AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
94 AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
95 AU1300_PIN_U1RX, AU1300_PIN_U1TX,
96 /* UART0 pins: 19-24 */
97 AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
98 AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
99 /* UART2: 25-26 */
100 AU1300_PIN_U2RX, AU1300_PIN_U2TX,
101 /* UART3: 27-28 */
102 AU1300_PIN_U3RX, AU1300_PIN_U3TX,
103 /* LCD controller PWMs, ext pixclock: 30-31 */
104 AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
105 /* SD1 interface: 32-37 */
106 AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
107 AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
108 /* SD2 interface: 38-43 */
109 AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
110 AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
111 /* PSC0/1 clocks: 44-45 */
112 AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
113 /* PSCs: 46-49/50-53/54-57/58-61 */
114 AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
115 AU1300_PIN_PSC0D1,
116 AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
117 AU1300_PIN_PSC1D1,
118 AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0,
119 AU1300_PIN_PSC2D1,
120 AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
121 AU1300_PIN_PSC3D1,
122 /* PCMCIA interface: 62-70 */
123 AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
124 AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
125 AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
126 /* camera interface H/V sync inputs: 71-72 */
127 AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
128 /* PSC2/3 clocks: 73-74 */
129 AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
130 -1, /* terminator */
131 };
132
133 static void __init db1300_gpio_config(void)
134 {
135 int *i;
136
137 i = &db1300_dev_pins[0];
138 while (*i != -1)
139 au1300_pinfunc_to_dev(*i++);
140
141 i = &db1300_gpio_pins[0];
142 while (*i != -1)
143 au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
144
145 au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
146 }
147
148 /**********************************************************************/
149
150 static u64 au1300_all_dmamask = DMA_BIT_MASK(32);
151
152 static void au1300_nand_cmd_ctrl(struct nand_chip *this, int cmd,
153 unsigned int ctrl)
154 {
155 unsigned long ioaddr = (unsigned long)this->legacy.IO_ADDR_W;
156
157 ioaddr &= 0xffffff00;
158
159 if (ctrl & NAND_CLE) {
160 ioaddr += MEM_STNAND_CMD;
161 } else if (ctrl & NAND_ALE) {
162 ioaddr += MEM_STNAND_ADDR;
163 } else {
164 /* assume we want to r/w real data by default */
165 ioaddr += MEM_STNAND_DATA;
166 }
167 this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W = (void __iomem *)ioaddr;
168 if (cmd != NAND_CMD_NONE) {
169 __raw_writeb(cmd, this->legacy.IO_ADDR_W);
170 wmb();
171 }
172 }
173
174 static int au1300_nand_device_ready(struct nand_chip *this)
175 {
176 return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
177 }
178
179 static struct mtd_partition db1300_nand_parts[] = {
180 {
181 .name = "NAND FS 0",
182 .offset = 0,
183 .size = 8 * 1024 * 1024,
184 },
185 {
186 .name = "NAND FS 1",
187 .offset = MTDPART_OFS_APPEND,
188 .size = MTDPART_SIZ_FULL
189 },
190 };
191
192 struct platform_nand_data db1300_nand_platdata = {
193 .chip = {
194 .nr_chips = 1,
195 .chip_offset = 0,
196 .nr_partitions = ARRAY_SIZE(db1300_nand_parts),
197 .partitions = db1300_nand_parts,
198 .chip_delay = 20,
199 },
200 .ctrl = {
201 .dev_ready = au1300_nand_device_ready,
202 .cmd_ctrl = au1300_nand_cmd_ctrl,
203 },
204 };
205
206 static struct resource db1300_nand_res[] = {
207 [0] = {
208 .start = DB1300_NAND_PHYS_ADDR,
209 .end = DB1300_NAND_PHYS_ADDR + 0xff,
210 .flags = IORESOURCE_MEM,
211 },
212 };
213
214 static struct platform_device db1300_nand_dev = {
215 .name = "gen_nand",
216 .num_resources = ARRAY_SIZE(db1300_nand_res),
217 .resource = db1300_nand_res,
218 .id = -1,
219 .dev = {
220 .platform_data = &db1300_nand_platdata,
221 }
222 };
223
224 /**********************************************************************/
225
226 static struct resource db1300_eth_res[] = {
227 [0] = {
228 .start = DB1300_ETH_PHYS_ADDR,
229 .end = DB1300_ETH_PHYS_END,
230 .flags = IORESOURCE_MEM,
231 },
232 [1] = {
233 .start = DB1300_ETH_INT,
234 .end = DB1300_ETH_INT,
235 .flags = IORESOURCE_IRQ,
236 },
237 };
238
239 static struct smsc911x_platform_config db1300_eth_config = {
240 .phy_interface = PHY_INTERFACE_MODE_MII,
241 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
242 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
243 .flags = SMSC911X_USE_32BIT,
244 };
245
246 static struct platform_device db1300_eth_dev = {
247 .name = "smsc911x",
248 .id = -1,
249 .num_resources = ARRAY_SIZE(db1300_eth_res),
250 .resource = db1300_eth_res,
251 .dev = {
252 .platform_data = &db1300_eth_config,
253 },
254 };
255
256 /**********************************************************************/
257
258 static struct resource au1300_psc1_res[] = {
259 [0] = {
260 .start = AU1300_PSC1_PHYS_ADDR,
261 .end = AU1300_PSC1_PHYS_ADDR + 0x0fff,
262 .flags = IORESOURCE_MEM,
263 },
264 [1] = {
265 .start = AU1300_PSC1_INT,
266 .end = AU1300_PSC1_INT,
267 .flags = IORESOURCE_IRQ,
268 },
269 [2] = {
270 .start = AU1300_DSCR_CMD0_PSC1_TX,
271 .end = AU1300_DSCR_CMD0_PSC1_TX,
272 .flags = IORESOURCE_DMA,
273 },
274 [3] = {
275 .start = AU1300_DSCR_CMD0_PSC1_RX,
276 .end = AU1300_DSCR_CMD0_PSC1_RX,
277 .flags = IORESOURCE_DMA,
278 },
279 };
280
281 static struct platform_device db1300_ac97_dev = {
282 .name = "au1xpsc_ac97",
283 .id = 1, /* PSC ID. match with AC97 codec ID! */
284 .num_resources = ARRAY_SIZE(au1300_psc1_res),
285 .resource = au1300_psc1_res,
286 };
287
288 /**********************************************************************/
289
290 static struct resource au1300_psc2_res[] = {
291 [0] = {
292 .start = AU1300_PSC2_PHYS_ADDR,
293 .end = AU1300_PSC2_PHYS_ADDR + 0x0fff,
294 .flags = IORESOURCE_MEM,
295 },
296 [1] = {
297 .start = AU1300_PSC2_INT,
298 .end = AU1300_PSC2_INT,
299 .flags = IORESOURCE_IRQ,
300 },
301 [2] = {
302 .start = AU1300_DSCR_CMD0_PSC2_TX,
303 .end = AU1300_DSCR_CMD0_PSC2_TX,
304 .flags = IORESOURCE_DMA,
305 },
306 [3] = {
307 .start = AU1300_DSCR_CMD0_PSC2_RX,
308 .end = AU1300_DSCR_CMD0_PSC2_RX,
309 .flags = IORESOURCE_DMA,
310 },
311 };
312
313 static struct platform_device db1300_i2s_dev = {
314 .name = "au1xpsc_i2s",
315 .id = 2, /* PSC ID */
316 .num_resources = ARRAY_SIZE(au1300_psc2_res),
317 .resource = au1300_psc2_res,
318 };
319
320 /**********************************************************************/
321
322 static struct resource au1300_psc3_res[] = {
323 [0] = {
324 .start = AU1300_PSC3_PHYS_ADDR,
325 .end = AU1300_PSC3_PHYS_ADDR + 0x0fff,
326 .flags = IORESOURCE_MEM,
327 },
328 [1] = {
329 .start = AU1300_PSC3_INT,
330 .end = AU1300_PSC3_INT,
331 .flags = IORESOURCE_IRQ,
332 },
333 [2] = {
334 .start = AU1300_DSCR_CMD0_PSC3_TX,
335 .end = AU1300_DSCR_CMD0_PSC3_TX,
336 .flags = IORESOURCE_DMA,
337 },
338 [3] = {
339 .start = AU1300_DSCR_CMD0_PSC3_RX,
340 .end = AU1300_DSCR_CMD0_PSC3_RX,
341 .flags = IORESOURCE_DMA,
342 },
343 };
344
345 static struct platform_device db1300_i2c_dev = {
346 .name = "au1xpsc_smbus",
347 .id = 0, /* bus number */
348 .num_resources = ARRAY_SIZE(au1300_psc3_res),
349 .resource = au1300_psc3_res,
350 };
351
352 /**********************************************************************/
353
354 /* proper key assignments when facing the LCD panel. For key assignments
355 * according to the schematics swap up with down and left with right.
356 * I chose to use it to emulate the arrow keys of a keyboard.
357 */
358 static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
359 {
360 .code = KEY_DOWN,
361 .gpio = AU1300_PIN_LCDPWM0,
362 .type = EV_KEY,
363 .debounce_interval = 1,
364 .active_low = 1,
365 .desc = "5waysw-down",
366 },
367 {
368 .code = KEY_UP,
369 .gpio = AU1300_PIN_PSC2SYNC1,
370 .type = EV_KEY,
371 .debounce_interval = 1,
372 .active_low = 1,
373 .desc = "5waysw-up",
374 },
375 {
376 .code = KEY_RIGHT,
377 .gpio = AU1300_PIN_WAKE3,
378 .type = EV_KEY,
379 .debounce_interval = 1,
380 .active_low = 1,
381 .desc = "5waysw-right",
382 },
383 {
384 .code = KEY_LEFT,
385 .gpio = AU1300_PIN_WAKE2,
386 .type = EV_KEY,
387 .debounce_interval = 1,
388 .active_low = 1,
389 .desc = "5waysw-left",
390 },
391 {
392 .code = KEY_ENTER,
393 .gpio = AU1300_PIN_WAKE1,
394 .type = EV_KEY,
395 .debounce_interval = 1,
396 .active_low = 1,
397 .desc = "5waysw-push",
398 },
399 };
400
401 static struct gpio_keys_platform_data db1300_5waysw_data = {
402 .buttons = db1300_5waysw_arrowkeys,
403 .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys),
404 .rep = 1,
405 .name = "db1300-5wayswitch",
406 };
407
408 static struct platform_device db1300_5waysw_dev = {
409 .name = "gpio-keys",
410 .dev = {
411 .platform_data = &db1300_5waysw_data,
412 },
413 };
414
415 /**********************************************************************/
416
417 static struct pata_platform_info db1300_ide_info = {
418 .ioport_shift = DB1300_IDE_REG_SHIFT,
419 };
420
421 #define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT)
422 static struct resource db1300_ide_res[] = {
423 [0] = {
424 .start = DB1300_IDE_PHYS_ADDR,
425 .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
426 .flags = IORESOURCE_MEM,
427 },
428 [1] = {
429 .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
430 .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
431 .flags = IORESOURCE_MEM,
432 },
433 [2] = {
434 .start = DB1300_IDE_INT,
435 .end = DB1300_IDE_INT,
436 .flags = IORESOURCE_IRQ,
437 },
438 };
439
440 static struct platform_device db1300_ide_dev = {
441 .dev = {
442 .dma_mask = &au1300_all_dmamask,
443 .coherent_dma_mask = DMA_BIT_MASK(32),
444 .platform_data = &db1300_ide_info,
445 },
446 .name = "pata_platform",
447 .resource = db1300_ide_res,
448 .num_resources = ARRAY_SIZE(db1300_ide_res),
449 };
450
451 /**********************************************************************/
452
453 #ifdef CONFIG_MMC_AU1X
454 static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
455 {
456 disable_irq_nosync(irq);
457 return IRQ_WAKE_THREAD;
458 }
459
460 static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
461 {
462 mmc_detect_change(ptr, msecs_to_jiffies(200));
463
464 msleep(100); /* debounce */
465 if (irq == DB1300_SD1_INSERT_INT)
466 enable_irq(DB1300_SD1_EJECT_INT);
467 else
468 enable_irq(DB1300_SD1_INSERT_INT);
469
470 return IRQ_HANDLED;
471 }
472
473 static int db1300_mmc_card_readonly(void *mmc_host)
474 {
475 /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
476 return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
477 }
478
479 static int db1300_mmc_card_inserted(void *mmc_host)
480 {
481 return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
482 }
483
484 static int db1300_mmc_cd_setup(void *mmc_host, int en)
485 {
486 int ret;
487
488 if (en) {
489 ret = request_threaded_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd,
490 db1300_mmc_cdfn, 0, "sd_insert", mmc_host);
491 if (ret)
492 goto out;
493
494 ret = request_threaded_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd,
495 db1300_mmc_cdfn, 0, "sd_eject", mmc_host);
496 if (ret) {
497 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
498 goto out;
499 }
500
501 if (db1300_mmc_card_inserted(mmc_host))
502 enable_irq(DB1300_SD1_EJECT_INT);
503 else
504 enable_irq(DB1300_SD1_INSERT_INT);
505
506 } else {
507 free_irq(DB1300_SD1_INSERT_INT, mmc_host);
508 free_irq(DB1300_SD1_EJECT_INT, mmc_host);
509 }
510 ret = 0;
511 out:
512 return ret;
513 }
514
515 static void db1300_mmcled_set(struct led_classdev *led,
516 enum led_brightness brightness)
517 {
518 if (brightness != LED_OFF)
519 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
520 else
521 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
522 }
523
524 static struct led_classdev db1300_mmc_led = {
525 .brightness_set = db1300_mmcled_set,
526 };
527
528 struct au1xmmc_platform_data db1300_sd1_platdata = {
529 .cd_setup = db1300_mmc_cd_setup,
530 .card_inserted = db1300_mmc_card_inserted,
531 .card_readonly = db1300_mmc_card_readonly,
532 .led = &db1300_mmc_led,
533 };
534
535 static struct resource au1300_sd1_res[] = {
536 [0] = {
537 .start = AU1300_SD1_PHYS_ADDR,
538 .end = AU1300_SD1_PHYS_ADDR,
539 .flags = IORESOURCE_MEM,
540 },
541 [1] = {
542 .start = AU1300_SD1_INT,
543 .end = AU1300_SD1_INT,
544 .flags = IORESOURCE_IRQ,
545 },
546 [2] = {
547 .start = AU1300_DSCR_CMD0_SDMS_TX1,
548 .end = AU1300_DSCR_CMD0_SDMS_TX1,
549 .flags = IORESOURCE_DMA,
550 },
551 [3] = {
552 .start = AU1300_DSCR_CMD0_SDMS_RX1,
553 .end = AU1300_DSCR_CMD0_SDMS_RX1,
554 .flags = IORESOURCE_DMA,
555 },
556 };
557
558 static struct platform_device db1300_sd1_dev = {
559 .dev = {
560 .dma_mask = &au1300_all_dmamask,
561 .coherent_dma_mask = DMA_BIT_MASK(32),
562 .platform_data = &db1300_sd1_platdata,
563 },
564 .name = "au1xxx-mmc",
565 .id = 1,
566 .resource = au1300_sd1_res,
567 .num_resources = ARRAY_SIZE(au1300_sd1_res),
568 };
569
570 /**********************************************************************/
571
572 static int db1300_movinand_inserted(void *mmc_host)
573 {
574 return 0; /* disable for now, it doesn't work yet */
575 }
576
577 static int db1300_movinand_readonly(void *mmc_host)
578 {
579 return 0;
580 }
581
582 static void db1300_movinand_led_set(struct led_classdev *led,
583 enum led_brightness brightness)
584 {
585 if (brightness != LED_OFF)
586 bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
587 else
588 bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
589 }
590
591 static struct led_classdev db1300_movinand_led = {
592 .brightness_set = db1300_movinand_led_set,
593 };
594
595 struct au1xmmc_platform_data db1300_sd0_platdata = {
596 .card_inserted = db1300_movinand_inserted,
597 .card_readonly = db1300_movinand_readonly,
598 .led = &db1300_movinand_led,
599 .mask_host_caps = MMC_CAP_NEEDS_POLL,
600 };
601
602 static struct resource au1300_sd0_res[] = {
603 [0] = {
604 .start = AU1100_SD0_PHYS_ADDR,
605 .end = AU1100_SD0_PHYS_ADDR,
606 .flags = IORESOURCE_MEM,
607 },
608 [1] = {
609 .start = AU1300_SD0_INT,
610 .end = AU1300_SD0_INT,
611 .flags = IORESOURCE_IRQ,
612 },
613 [2] = {
614 .start = AU1300_DSCR_CMD0_SDMS_TX0,
615 .end = AU1300_DSCR_CMD0_SDMS_TX0,
616 .flags = IORESOURCE_DMA,
617 },
618 [3] = {
619 .start = AU1300_DSCR_CMD0_SDMS_RX0,
620 .end = AU1300_DSCR_CMD0_SDMS_RX0,
621 .flags = IORESOURCE_DMA,
622 },
623 };
624
625 static struct platform_device db1300_sd0_dev = {
626 .dev = {
627 .dma_mask = &au1300_all_dmamask,
628 .coherent_dma_mask = DMA_BIT_MASK(32),
629 .platform_data = &db1300_sd0_platdata,
630 },
631 .name = "au1xxx-mmc",
632 .id = 0,
633 .resource = au1300_sd0_res,
634 .num_resources = ARRAY_SIZE(au1300_sd0_res),
635 };
636 #endif /* CONFIG_MMC_AU1X */
637
638 /**********************************************************************/
639
640 static struct platform_device db1300_wm9715_dev = {
641 .name = "wm9712-codec",
642 .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */
643 };
644
645 static struct platform_device db1300_ac97dma_dev = {
646 .name = "au1xpsc-pcm",
647 .id = 1, /* PSC ID */
648 };
649
650 static struct platform_device db1300_i2sdma_dev = {
651 .name = "au1xpsc-pcm",
652 .id = 2, /* PSC ID */
653 };
654
655 static struct platform_device db1300_sndac97_dev = {
656 .name = "db1300-ac97",
657 .dev = {
658 .dma_mask = &au1300_all_dmamask,
659 .coherent_dma_mask = DMA_BIT_MASK(32),
660 },
661 };
662
663 static struct platform_device db1300_sndi2s_dev = {
664 .name = "db1300-i2s",
665 .dev = {
666 .dma_mask = &au1300_all_dmamask,
667 .coherent_dma_mask = DMA_BIT_MASK(32),
668 },
669 };
670
671 /**********************************************************************/
672
673 static int db1300fb_panel_index(void)
674 {
675 return 9; /* DB1300_800x480 */
676 }
677
678 static int db1300fb_panel_init(void)
679 {
680 /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
681 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
682 BCSR_BOARD_LCDBL);
683 return 0;
684 }
685
686 static int db1300fb_panel_shutdown(void)
687 {
688 /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
689 bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
690 BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
691 return 0;
692 }
693
694 static struct au1200fb_platdata db1300fb_pd = {
695 .panel_index = db1300fb_panel_index,
696 .panel_init = db1300fb_panel_init,
697 .panel_shutdown = db1300fb_panel_shutdown,
698 };
699
700 static struct resource au1300_lcd_res[] = {
701 [0] = {
702 .start = AU1200_LCD_PHYS_ADDR,
703 .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
704 .flags = IORESOURCE_MEM,
705 },
706 [1] = {
707 .start = AU1300_LCD_INT,
708 .end = AU1300_LCD_INT,
709 .flags = IORESOURCE_IRQ,
710 }
711 };
712
713
714 static struct platform_device db1300_lcd_dev = {
715 .name = "au1200-lcd",
716 .id = 0,
717 .dev = {
718 .dma_mask = &au1300_all_dmamask,
719 .coherent_dma_mask = DMA_BIT_MASK(32),
720 .platform_data = &db1300fb_pd,
721 },
722 .num_resources = ARRAY_SIZE(au1300_lcd_res),
723 .resource = au1300_lcd_res,
724 };
725
726 /**********************************************************************/
727
728 #if IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX)
729 static struct wm97xx_mach_ops db1300_wm97xx_ops = {
730 .irq_gpio = WM97XX_GPIO_3,
731 };
732
733 static int db1300_wm97xx_probe(struct platform_device *pdev)
734 {
735 struct wm97xx *wm = platform_get_drvdata(pdev);
736
737 /* external pendown indicator */
738 wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
739 WM97XX_GPIO_POL_LOW, WM97XX_GPIO_STICKY,
740 WM97XX_GPIO_WAKE);
741
742 /* internal "virtual" pendown gpio */
743 wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT,
744 WM97XX_GPIO_POL_LOW, WM97XX_GPIO_NOTSTICKY,
745 WM97XX_GPIO_NOWAKE);
746
747 wm->pen_irq = DB1300_AC97_PEN_INT;
748
749 return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops);
750 }
751 #else
752 static int db1300_wm97xx_probe(struct platform_device *pdev)
753 {
754 return -ENODEV;
755 }
756 #endif
757
758 static struct platform_driver db1300_wm97xx_driver = {
759 .driver.name = "wm97xx-touch",
760 .driver.owner = THIS_MODULE,
761 .probe = db1300_wm97xx_probe,
762 };
763
764 /**********************************************************************/
765
766 static struct platform_device *db1300_dev[] __initdata = {
767 &db1300_eth_dev,
768 &db1300_i2c_dev,
769 &db1300_5waysw_dev,
770 &db1300_nand_dev,
771 &db1300_ide_dev,
772 #ifdef CONFIG_MMC_AU1X
773 &db1300_sd0_dev,
774 &db1300_sd1_dev,
775 #endif
776 &db1300_lcd_dev,
777 &db1300_ac97_dev,
778 &db1300_i2s_dev,
779 &db1300_wm9715_dev,
780 &db1300_ac97dma_dev,
781 &db1300_i2sdma_dev,
782 &db1300_sndac97_dev,
783 &db1300_sndi2s_dev,
784 };
785
786 int __init db1300_dev_setup(void)
787 {
788 int swapped, cpldirq;
789 struct clk *c;
790
791 /* setup CPLD IRQ muxer */
792 cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
793 irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
794 bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
795
796 /* insert/eject IRQs: one always triggers so don't enable them
797 * when doing request_irq() on them. DB1200 has this bug too.
798 */
799 irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
800 irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
801 irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
802 irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
803
804 /*
805 * setup board
806 */
807 prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
808
809 i2c_register_board_info(0, db1300_i2c_devs,
810 ARRAY_SIZE(db1300_i2c_devs));
811
812 if (platform_driver_register(&db1300_wm97xx_driver))
813 pr_warn("DB1300: failed to init touch pen irq support!\n");
814
815 /* Audio PSC clock is supplied by codecs (PSC1, 2) */
816 __raw_writel(PSC_SEL_CLK_SERCLK,
817 (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
818 wmb();
819 __raw_writel(PSC_SEL_CLK_SERCLK,
820 (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
821 wmb();
822 /* I2C driver wants 50MHz, get as close as possible */
823 c = clk_get(NULL, "psc3_intclk");
824 if (!IS_ERR(c)) {
825 clk_set_rate(c, 50000000);
826 clk_prepare_enable(c);
827 clk_put(c);
828 }
829 __raw_writel(PSC_SEL_CLK_INTCLK,
830 (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
831 wmb();
832
833 /* enable power to USB ports */
834 bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
835
836 /* although it is socket #0, it uses the CPLD bits which previous boards
837 * have used for socket #1.
838 */
839 db1x_register_pcmcia_socket(
840 AU1000_PCMCIA_ATTR_PHYS_ADDR,
841 AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
842 AU1000_PCMCIA_MEM_PHYS_ADDR,
843 AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1,
844 AU1000_PCMCIA_IO_PHYS_ADDR,
845 AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1,
846 DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
847
848 swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
849 db1x_register_norflash(64 << 20, 2, swapped);
850
851 return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
852 }
853
854
855 int __init db1300_board_setup(void)
856 {
857 unsigned short whoami;
858
859 bcsr_init(DB1300_BCSR_PHYS_ADDR,
860 DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
861
862 whoami = bcsr_read(BCSR_WHOAMI);
863 if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300)
864 return -ENODEV;
865
866 db1300_gpio_config();
867
868 printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
869 "BoardID %d CPLD Rev %d DaughtercardID %d\n",
870 BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
871 BCSR_WHOAMI_DCID(whoami));
872
873 /* enable UARTs, YAMON only enables #2 */
874 alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
875 alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
876 alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
877
878 return 0;
879 }
Kernel DRM miscellaneous fixes and cross-tree changes