1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * tsi108/109 device setup code
5 * Maintained by Roy Zang < tie-fei.zang@freescale.com >
8 #include <linux/stddef.h>
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/errno.h>
12 #include <linux/major.h>
13 #include <linux/delay.h>
14 #include <linux/irq.h>
15 #include <linux/export.h>
16 #include <linux/device.h>
17 #include <linux/etherdevice.h>
18 #include <linux/platform_device.h>
19 #include <linux/of_address.h>
20 #include <linux/of_irq.h>
21 #include <linux/of_net.h>
22 #include <asm/tsi108.h>
24 #include <linux/atomic.h>
27 #include <mm/mmu_decl.h>
32 #define DBG(fmt...) do { printk(fmt); } while(0)
34 #define DBG(fmt...) do { } while(0)
37 static phys_addr_t tsi108_csr_base
= -1;
39 phys_addr_t
get_csrbase(void)
41 struct device_node
*tsi
;
43 if (tsi108_csr_base
!= -1)
44 return tsi108_csr_base
;
46 tsi
= of_find_node_by_type(NULL
, "tsi-bridge");
49 of_address_to_resource(tsi
, 0, &res
);
50 tsi108_csr_base
= res
.start
;
53 return tsi108_csr_base
;
55 EXPORT_SYMBOL(get_csrbase
);
57 u32
get_vir_csrbase(void)
59 return (u32
) (ioremap(get_csrbase(), 0x10000));
61 EXPORT_SYMBOL(get_vir_csrbase
);
63 static int __init
tsi108_eth_of_init(void)
65 struct device_node
*np
;
67 struct platform_device
*tsi_eth_dev
;
71 for_each_compatible_node(np
, "network", "tsi108-ethernet") {
73 struct device_node
*phy
, *mdio
;
75 const unsigned int *phy_id
;
78 memset(r
, 0, sizeof(r
));
79 memset(&tsi_eth_data
, 0, sizeof(tsi_eth_data
));
81 ret
= of_address_to_resource(np
, 0, &r
[0]);
82 DBG("%s: name:start->end = %s:%pR\n",
83 __func__
, r
[0].name
, &r
[0]);
88 r
[1].start
= irq_of_parse_and_map(np
, 0);
89 r
[1].end
= irq_of_parse_and_map(np
, 0);
90 r
[1].flags
= IORESOURCE_IRQ
;
91 DBG("%s: name:start->end = %s:%pR\n",
92 __func__
, r
[1].name
, &r
[1]);
95 platform_device_register_simple("tsi-ethernet", i
++, &r
[0],
98 if (IS_ERR(tsi_eth_dev
)) {
99 ret
= PTR_ERR(tsi_eth_dev
);
103 of_get_mac_address(np
, tsi_eth_data
.mac_addr
);
105 ph
= of_get_property(np
, "mdio-handle", NULL
);
106 mdio
= of_find_node_by_phandle(*ph
);
107 ret
= of_address_to_resource(mdio
, 0, &res
);
112 ph
= of_get_property(np
, "phy-handle", NULL
);
113 phy
= of_find_node_by_phandle(*ph
);
120 phy_id
= of_get_property(phy
, "reg", NULL
);
122 tsi_eth_data
.regs
= r
[0].start
;
123 tsi_eth_data
.phyregs
= res
.start
;
124 tsi_eth_data
.phy
= *phy_id
;
125 tsi_eth_data
.irq_num
= irq_of_parse_and_map(np
, 0);
127 /* Some boards with the TSI108 bridge (e.g. Holly)
128 * have a miswiring of the ethernet PHYs which
129 * requires a workaround. The special
130 * "txc-rxc-delay-disable" property enables this
131 * workaround. FIXME: Need to port the tsi108_eth
132 * driver itself to phylib and use a non-misleading
133 * name for the workaround flag - it's not actually to
134 * do with the model of PHY in use */
135 if (of_property_read_bool(phy
, "txc-rxc-delay-disable"))
136 tsi_eth_data
.phy_type
= TSI108_PHY_BCM54XX
;
140 platform_device_add_data(tsi_eth_dev
, &tsi_eth_data
,
147 platform_device_unregister(tsi_eth_dev
);
153 arch_initcall(tsi108_eth_of_init
);