?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
drm/modes: Fix drm_mode_vrefres() docs
[drm/drm-misc.git] / drivers / i2c / busses / i2c-i801.c
blob75dab01d43a750ccdd98b5dafccc5e2475a01fe0
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
4 Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
5 <mdsxyz123@yahoo.com>
6 Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de>
7 Copyright (C) 2010 Intel Corporation,
8 David Woodhouse <dwmw2@infradead.org>
9
10 */
11
12 /*
13 * Supports the following Intel I/O Controller Hubs (ICH):
14 *
15 * I/O Block I2C
16 * region SMBus Block proc. block
17 * Chip name PCI ID size PEC buffer call read
18 * ---------------------------------------------------------------------------
19 * 82801AA (ICH) 0x2413 16 no no no no
20 * 82801AB (ICH0) 0x2423 16 no no no no
21 * 82801BA (ICH2) 0x2443 16 no no no no
22 * 82801CA (ICH3) 0x2483 32 soft no no no
23 * 82801DB (ICH4) 0x24c3 32 hard yes no no
24 * 82801E (ICH5) 0x24d3 32 hard yes yes yes
25 * 6300ESB 0x25a4 32 hard yes yes yes
26 * 82801F (ICH6) 0x266a 32 hard yes yes yes
27 * 6310ESB/6320ESB 0x269b 32 hard yes yes yes
28 * 82801G (ICH7) 0x27da 32 hard yes yes yes
29 * 82801H (ICH8) 0x283e 32 hard yes yes yes
30 * 82801I (ICH9) 0x2930 32 hard yes yes yes
31 * EP80579 (Tolapai) 0x5032 32 hard yes yes yes
32 * ICH10 0x3a30 32 hard yes yes yes
33 * ICH10 0x3a60 32 hard yes yes yes
34 * 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
35 * 6 Series (PCH) 0x1c22 32 hard yes yes yes
36 * Patsburg (PCH) 0x1d22 32 hard yes yes yes
37 * Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
38 * Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
39 * Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
40 * DH89xxCC (PCH) 0x2330 32 hard yes yes yes
41 * Panther Point (PCH) 0x1e22 32 hard yes yes yes
42 * Lynx Point (PCH) 0x8c22 32 hard yes yes yes
43 * Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
44 * Avoton (SOC) 0x1f3c 32 hard yes yes yes
45 * Wellsburg (PCH) 0x8d22 32 hard yes yes yes
46 * Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
47 * Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
48 * Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
49 * Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
50 * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
51 * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
52 * BayTrail (SOC) 0x0f12 32 hard yes yes yes
53 * Braswell (SOC) 0x2292 32 hard yes yes yes
54 * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
55 * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
56 * DNV (SOC) 0x19df 32 hard yes yes yes
57 * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes
58 * Broxton (SOC) 0x5ad4 32 hard yes yes yes
59 * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
60 * Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
61 * Kaby Lake PCH-H (PCH) 0xa2a3 32 hard yes yes yes
62 * Gemini Lake (SOC) 0x31d4 32 hard yes yes yes
63 * Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes
64 * Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
65 * Cedar Fork (PCH) 0x18df 32 hard yes yes yes
66 * Ice Lake-LP (PCH) 0x34a3 32 hard yes yes yes
67 * Ice Lake-N (PCH) 0x38a3 32 hard yes yes yes
68 * Comet Lake (PCH) 0x02a3 32 hard yes yes yes
69 * Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes
70 * Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes
71 * Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes
72 * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes
73 * Jasper Lake (SOC) 0x4da3 32 hard yes yes yes
74 * Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
75 * Alder Lake-S (PCH) 0x7aa3 32 hard yes yes yes
76 * Alder Lake-P (PCH) 0x51a3 32 hard yes yes yes
77 * Alder Lake-M (PCH) 0x54a3 32 hard yes yes yes
78 * Raptor Lake-S (PCH) 0x7a23 32 hard yes yes yes
79 * Meteor Lake-P (SOC) 0x7e22 32 hard yes yes yes
80 * Meteor Lake SoC-S (SOC) 0xae22 32 hard yes yes yes
81 * Meteor Lake PCH-S (PCH) 0x7f23 32 hard yes yes yes
82 * Birch Stream (SOC) 0x5796 32 hard yes yes yes
83 * Arrow Lake-H (SOC) 0x7722 32 hard yes yes yes
84 * Panther Lake-H (SOC) 0xe322 32 hard yes yes yes
85 * Panther Lake-P (SOC) 0xe422 32 hard yes yes yes
86 *
87 * Features supported by this driver:
88 * Software PEC no
89 * Hardware PEC yes
90 * Block buffer yes
91 * Block process call transaction yes
92 * I2C block read transaction yes (doesn't use the block buffer)
93 * Target mode no
94 * SMBus Host Notify yes
95 * Interrupt processing yes
96 *
97 * See the file Documentation/i2c/busses/i2c-i801.rst for details.
98 */
99
100 #define DRV_NAME "i801_smbus"
101
102 #include <linux/interrupt.h>
103 #include <linux/module.h>
104 #include <linux/pci.h>
105 #include <linux/kernel.h>
106 #include <linux/stddef.h>
107 #include <linux/delay.h>
108 #include <linux/ioport.h>
109 #include <linux/init.h>
110 #include <linux/i2c.h>
111 #include <linux/i2c-mux.h>
112 #include <linux/i2c-smbus.h>
113 #include <linux/acpi.h>
114 #include <linux/io.h>
115 #include <linux/dmi.h>
116 #include <linux/slab.h>
117 #include <linux/string.h>
118 #include <linux/completion.h>
119 #include <linux/err.h>
120 #include <linux/platform_device.h>
121 #include <linux/platform_data/itco_wdt.h>
122 #include <linux/platform_data/x86/p2sb.h>
123 #include <linux/pm_runtime.h>
124 #include <linux/mutex.h>
125
126 #ifdef CONFIG_I2C_I801_MUX
127 #include <linux/gpio/machine.h>
128 #include <linux/platform_data/i2c-mux-gpio.h>
129 #endif
130
131 /* I801 SMBus address offsets */
132 #define SMBHSTSTS(p) (0 + (p)->smba)
133 #define SMBHSTCNT(p) (2 + (p)->smba)
134 #define SMBHSTCMD(p) (3 + (p)->smba)
135 #define SMBHSTADD(p) (4 + (p)->smba)
136 #define SMBHSTDAT0(p) (5 + (p)->smba)
137 #define SMBHSTDAT1(p) (6 + (p)->smba)
138 #define SMBBLKDAT(p) (7 + (p)->smba)
139 #define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
140 #define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
141 #define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
142 #define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */
143 #define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */
144 #define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */
145
146 /* PCI Address Constants */
147 #define SMBBAR 4
148 #define SMBHSTCFG 0x040
149 #define TCOBASE 0x050
150 #define TCOCTL 0x054
151
152 #define SBREG_SMBCTRL 0xc6000c
153 #define SBREG_SMBCTRL_DNV 0xcf000c
154
155 /* Host configuration bits for SMBHSTCFG */
156 #define SMBHSTCFG_HST_EN BIT(0)
157 #define SMBHSTCFG_SMB_SMI_EN BIT(1)
158 #define SMBHSTCFG_I2C_EN BIT(2)
159 #define SMBHSTCFG_SPD_WD BIT(4)
160
161 /* TCO configuration bits for TCOCTL */
162 #define TCOCTL_EN BIT(8)
163
164 /* Auxiliary status register bits, ICH4+ only */
165 #define SMBAUXSTS_CRCE BIT(0)
166 #define SMBAUXSTS_STCO BIT(1)
167
168 /* Auxiliary control register bits, ICH4+ only */
169 #define SMBAUXCTL_CRC BIT(0)
170 #define SMBAUXCTL_E32B BIT(1)
171
172 /* I801 command constants */
173 #define I801_QUICK 0x00
174 #define I801_BYTE 0x04
175 #define I801_BYTE_DATA 0x08
176 #define I801_WORD_DATA 0x0C
177 #define I801_PROC_CALL 0x10
178 #define I801_BLOCK_DATA 0x14
179 #define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
180 #define I801_BLOCK_PROC_CALL 0x1C
181
182 /* I801 Host Control register bits */
183 #define SMBHSTCNT_INTREN BIT(0)
184 #define SMBHSTCNT_KILL BIT(1)
185 #define SMBHSTCNT_LAST_BYTE BIT(5)
186 #define SMBHSTCNT_START BIT(6)
187 #define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */
188
189 /* I801 Hosts Status register bits */
190 #define SMBHSTSTS_BYTE_DONE BIT(7)
191 #define SMBHSTSTS_INUSE_STS BIT(6)
192 #define SMBHSTSTS_SMBALERT_STS BIT(5)
193 #define SMBHSTSTS_FAILED BIT(4)
194 #define SMBHSTSTS_BUS_ERR BIT(3)
195 #define SMBHSTSTS_DEV_ERR BIT(2)
196 #define SMBHSTSTS_INTR BIT(1)
197 #define SMBHSTSTS_HOST_BUSY BIT(0)
198
199 /* Host Notify Status register bits */
200 #define SMBSLVSTS_HST_NTFY_STS BIT(0)
201
202 /* Host Notify Command register bits */
203 #define SMBSLVCMD_SMBALERT_DISABLE BIT(2)
204 #define SMBSLVCMD_HST_NTFY_INTREN BIT(0)
205
206 #define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
207 SMBHSTSTS_DEV_ERR)
208
209 #define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
210 STATUS_ERROR_FLAGS)
211
212 #define SMBUS_LEN_SENTINEL (I2C_SMBUS_BLOCK_MAX + 1)
213
214 /* Older devices have their ID defined in <linux/pci_ids.h> */
215 #define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS 0x02a3
216 #define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS 0x06a3
217 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
218 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
219 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
220 #define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9
221 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
222 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
223 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
224 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
225 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
226 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
227 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
228 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
229 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
230 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
231 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
232 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4
233 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3
234 #define PCI_DEVICE_ID_INTEL_ICELAKE_N_SMBUS 0x38a3
235 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
236 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3
237 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
238 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
239 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS 0x51a3
240 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS 0x54a3
241 #define PCI_DEVICE_ID_INTEL_BIRCH_STREAM_SMBUS 0x5796
242 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
243 #define PCI_DEVICE_ID_INTEL_ARROW_LAKE_H_SMBUS 0x7722
244 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23
245 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3
246 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_P_SMBUS 0x7e22
247 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_PCH_S_SMBUS 0x7f23
248 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
249 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
250 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
251 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
252 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
253 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
254 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
255 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
256 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
257 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS 0x9da3
258 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS 0xa0a3
259 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
260 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
261 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
262 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS 0xa2a3
263 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS 0xa323
264 #define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS 0xa3a3
265 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_SOC_S_SMBUS 0xae22
266 #define PCI_DEVICE_ID_INTEL_PANTHER_LAKE_H_SMBUS 0xe322
267 #define PCI_DEVICE_ID_INTEL_PANTHER_LAKE_P_SMBUS 0xe422
268
269 struct i801_mux_config {
270 char *gpio_chip;
271 unsigned values[3];
272 int n_values;
273 unsigned gpios[2]; /* Relative to gpio_chip->base */
274 int n_gpios;
275 };
276
277 struct i801_priv {
278 struct i2c_adapter adapter;
279 unsigned long smba;
280 unsigned char original_hstcfg;
281 unsigned char original_hstcnt;
282 unsigned char original_slvcmd;
283 struct pci_dev *pci_dev;
284 unsigned int features;
285
286 /* isr processing */
287 struct completion done;
288 u8 status;
289
290 /* Command state used by isr for byte-by-byte block transactions */
291 u8 cmd;
292 bool is_read;
293 int count;
294 int len;
295 u8 *data;
296
297 #ifdef CONFIG_I2C_I801_MUX
298 struct platform_device *mux_pdev;
299 struct gpiod_lookup_table *lookup;
300 struct notifier_block mux_notifier_block;
301 #endif
302 struct platform_device *tco_pdev;
303
304 /*
305 * If set to true the host controller registers are reserved for
306 * ACPI AML use.
307 */
308 bool acpi_reserved;
309 };
310
311 #define FEATURE_SMBUS_PEC BIT(0)
312 #define FEATURE_BLOCK_BUFFER BIT(1)
313 #define FEATURE_BLOCK_PROC BIT(2)
314 #define FEATURE_I2C_BLOCK_READ BIT(3)
315 #define FEATURE_IRQ BIT(4)
316 #define FEATURE_HOST_NOTIFY BIT(5)
317 /* Not really a feature, but it's convenient to handle it as such */
318 #define FEATURE_IDF BIT(15)
319 #define FEATURE_TCO_SPT BIT(16)
320 #define FEATURE_TCO_CNL BIT(17)
321
322 static const char *i801_feature_names[] = {
323 "SMBus PEC",
324 "Block buffer",
325 "Block process call",
326 "I2C block read",
327 "Interrupt",
328 "SMBus Host Notify",
329 };
330
331 static unsigned int disable_features;
332 module_param(disable_features, uint, S_IRUGO | S_IWUSR);
333 MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
334 "\t\t 0x01 disable SMBus PEC\n"
335 "\t\t 0x02 disable the block buffer\n"
336 "\t\t 0x08 disable the I2C block read functionality\n"
337 "\t\t 0x10 don't use interrupts\n"
338 "\t\t 0x20 disable SMBus Host Notify ");
339
340 static int i801_get_block_len(struct i801_priv *priv)
341 {
342 u8 len = inb_p(SMBHSTDAT0(priv));
343
344 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
345 pci_err(priv->pci_dev, "Illegal SMBus block read size %u\n", len);
346 return -EPROTO;
347 }
348
349 return len;
350 }
351
352 static int i801_check_and_clear_pec_error(struct i801_priv *priv)
353 {
354 u8 status;
355
356 if (!(priv->features & FEATURE_SMBUS_PEC))
357 return 0;
358
359 status = inb_p(SMBAUXSTS(priv)) & SMBAUXSTS_CRCE;
360 if (status) {
361 outb_p(status, SMBAUXSTS(priv));
362 return -EBADMSG;
363 }
364
365 return 0;
366 }
367
368 /* Make sure the SMBus host is ready to start transmitting.
369 Return 0 if it is, -EBUSY if it is not. */
370 static int i801_check_pre(struct i801_priv *priv)
371 {
372 int status, result;
373
374 status = inb_p(SMBHSTSTS(priv));
375 if (status & SMBHSTSTS_HOST_BUSY) {
376 pci_err(priv->pci_dev, "SMBus is busy, can't use it!\n");
377 return -EBUSY;
378 }
379
380 status &= STATUS_FLAGS;
381 if (status) {
382 pci_dbg(priv->pci_dev, "Clearing status flags (%02x)\n", status);
383 outb_p(status, SMBHSTSTS(priv));
384 }
385
386 /*
387 * Clear CRC status if needed.
388 * During normal operation, i801_check_post() takes care
389 * of it after every operation. We do it here only in case
390 * the hardware was already in this state when the driver
391 * started.
392 */
393 result = i801_check_and_clear_pec_error(priv);
394 if (result)
395 pci_dbg(priv->pci_dev, "Clearing aux status flag CRCE\n");
396
397 return 0;
398 }
399
400 static int i801_check_post(struct i801_priv *priv, int status)
401 {
402 int result = 0;
403
404 /*
405 * If the SMBus is still busy, we give up
406 */
407 if (unlikely(status < 0)) {
408 /* try to stop the current command */
409 outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
410 usleep_range(1000, 2000);
411 outb_p(0, SMBHSTCNT(priv));
412
413 /* Check if it worked */
414 status = inb_p(SMBHSTSTS(priv));
415 if ((status & SMBHSTSTS_HOST_BUSY) ||
416 !(status & SMBHSTSTS_FAILED))
417 dev_dbg(&priv->pci_dev->dev,
418 "Failed terminating the transaction\n");
419 return -ETIMEDOUT;
420 }
421
422 if (status & SMBHSTSTS_FAILED) {
423 result = -EIO;
424 dev_err(&priv->pci_dev->dev, "Transaction failed\n");
425 }
426 if (status & SMBHSTSTS_DEV_ERR) {
427 /*
428 * This may be a PEC error, check and clear it.
429 *
430 * AUXSTS is handled differently from HSTSTS.
431 * For HSTSTS, i801_isr() or i801_wait_intr()
432 * has already cleared the error bits in hardware,
433 * and we are passed a copy of the original value
434 * in "status".
435 * For AUXSTS, the hardware register is left
436 * for us to handle here.
437 * This is asymmetric, slightly iffy, but safe,
438 * since all this code is serialized and the CRCE
439 * bit is harmless as long as it's cleared before
440 * the next operation.
441 */
442 result = i801_check_and_clear_pec_error(priv);
443 if (result) {
444 pci_dbg(priv->pci_dev, "PEC error\n");
445 } else {
446 result = -ENXIO;
447 pci_dbg(priv->pci_dev, "No response\n");
448 }
449 }
450 if (status & SMBHSTSTS_BUS_ERR) {
451 result = -EAGAIN;
452 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
453 }
454
455 return result;
456 }
457
458 /* Wait for BUSY being cleared and either INTR or an error flag being set */
459 static int i801_wait_intr(struct i801_priv *priv)
460 {
461 unsigned long timeout = jiffies + priv->adapter.timeout;
462 int status, busy;
463
464 do {
465 usleep_range(250, 500);
466 status = inb_p(SMBHSTSTS(priv));
467 busy = status & SMBHSTSTS_HOST_BUSY;
468 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
469 if (!busy && status)
470 return status & STATUS_ERROR_FLAGS;
471 } while (time_is_after_eq_jiffies(timeout));
472
473 return -ETIMEDOUT;
474 }
475
476 /* Wait for either BYTE_DONE or an error flag being set */
477 static int i801_wait_byte_done(struct i801_priv *priv)
478 {
479 unsigned long timeout = jiffies + priv->adapter.timeout;
480 int status;
481
482 do {
483 usleep_range(250, 500);
484 status = inb_p(SMBHSTSTS(priv));
485 if (status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE))
486 return status & STATUS_ERROR_FLAGS;
487 } while (time_is_after_eq_jiffies(timeout));
488
489 return -ETIMEDOUT;
490 }
491
492 static int i801_transaction(struct i801_priv *priv, int xact)
493 {
494 unsigned long result;
495 const struct i2c_adapter *adap = &priv->adapter;
496
497 if (priv->features & FEATURE_IRQ) {
498 reinit_completion(&priv->done);
499 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
500 SMBHSTCNT(priv));
501 result = wait_for_completion_timeout(&priv->done, adap->timeout);
502 return result ? priv->status : -ETIMEDOUT;
503 }
504
505 outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
506
507 return i801_wait_intr(priv);
508 }
509
510 static int i801_block_transaction_by_block(struct i801_priv *priv,
511 union i2c_smbus_data *data,
512 char read_write, int command)
513 {
514 int i, len, status, xact;
515
516 switch (command) {
517 case I2C_SMBUS_BLOCK_PROC_CALL:
518 xact = I801_BLOCK_PROC_CALL;
519 break;
520 case I2C_SMBUS_BLOCK_DATA:
521 xact = I801_BLOCK_DATA;
522 break;
523 default:
524 return -EOPNOTSUPP;
525 }
526
527 /* Set block buffer mode */
528 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
529
530 if (read_write == I2C_SMBUS_WRITE) {
531 len = data->block[0];
532 outb_p(len, SMBHSTDAT0(priv));
533 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
534 for (i = 0; i < len; i++)
535 outb_p(data->block[i+1], SMBBLKDAT(priv));
536 }
537
538 status = i801_transaction(priv, xact);
539 if (status)
540 goto out;
541
542 if (read_write == I2C_SMBUS_READ ||
543 command == I2C_SMBUS_BLOCK_PROC_CALL) {
544 len = i801_get_block_len(priv);
545 if (len < 0) {
546 status = len;
547 goto out;
548 }
549
550 data->block[0] = len;
551 inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
552 for (i = 0; i < len; i++)
553 data->block[i + 1] = inb_p(SMBBLKDAT(priv));
554 }
555 out:
556 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_E32B, SMBAUXCTL(priv));
557 return status;
558 }
559
560 static void i801_isr_byte_done(struct i801_priv *priv)
561 {
562 if (priv->is_read) {
563 /*
564 * At transfer start i801_smbus_block_transaction() marks
565 * the block length as invalid. Check for this sentinel value
566 * and read the block length from SMBHSTDAT0.
567 */
568 if (priv->len == SMBUS_LEN_SENTINEL) {
569 priv->len = i801_get_block_len(priv);
570 if (priv->len < 0)
571 /* FIXME: Recover */
572 priv->len = I2C_SMBUS_BLOCK_MAX;
573
574 priv->data[-1] = priv->len;
575 }
576
577 /* Read next byte */
578 if (priv->count < priv->len)
579 priv->data[priv->count++] = inb(SMBBLKDAT(priv));
580 else
581 dev_dbg(&priv->pci_dev->dev,
582 "Discarding extra byte on block read\n");
583
584 /* Set LAST_BYTE for last byte of read transaction */
585 if (priv->count == priv->len - 1)
586 outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
587 SMBHSTCNT(priv));
588 } else if (priv->count < priv->len - 1) {
589 /* Write next byte, except for IRQ after last byte */
590 outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
591 }
592 }
593
594 static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
595 {
596 unsigned short addr;
597
598 addr = inb_p(SMBNTFDADD(priv)) >> 1;
599
600 /*
601 * With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba)
602 * always returns 0. Our current implementation doesn't provide
603 * data, so we just ignore it.
604 */
605 i2c_handle_smbus_host_notify(&priv->adapter, addr);
606
607 /* clear Host Notify bit and return */
608 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
609 return IRQ_HANDLED;
610 }
611
612 /*
613 * There are three kinds of interrupts:
614 *
615 * 1) i801 signals transaction completion with one of these interrupts:
616 * INTR - Success
617 * DEV_ERR - Invalid command, NAK or communication timeout
618 * BUS_ERR - SMI# transaction collision
619 * FAILED - transaction was canceled due to a KILL request
620 * When any of these occur, update ->status and signal completion.
621 *
622 * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
623 * occurs for each byte of a byte-by-byte to prepare the next byte.
624 *
625 * 3) Host Notify interrupts
626 */
627 static irqreturn_t i801_isr(int irq, void *dev_id)
628 {
629 struct i801_priv *priv = dev_id;
630 u16 pcists;
631 u8 status;
632
633 /* Confirm this is our interrupt */
634 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
635 if (!(pcists & PCI_STATUS_INTERRUPT))
636 return IRQ_NONE;
637
638 if (priv->features & FEATURE_HOST_NOTIFY) {
639 status = inb_p(SMBSLVSTS(priv));
640 if (status & SMBSLVSTS_HST_NTFY_STS)
641 return i801_host_notify_isr(priv);
642 }
643
644 status = inb_p(SMBHSTSTS(priv));
645 if ((status & (SMBHSTSTS_BYTE_DONE | STATUS_ERROR_FLAGS)) == SMBHSTSTS_BYTE_DONE)
646 i801_isr_byte_done(priv);
647
648 /*
649 * Clear IRQ sources: SMB_ALERT status is set after signal assertion
650 * independently of the interrupt generation being blocked or not
651 * so clear it always when the status is set.
652 */
653 status &= STATUS_FLAGS | SMBHSTSTS_SMBALERT_STS;
654 outb_p(status, SMBHSTSTS(priv));
655
656 status &= STATUS_ERROR_FLAGS | SMBHSTSTS_INTR;
657 if (status) {
658 priv->status = status & STATUS_ERROR_FLAGS;
659 complete(&priv->done);
660 }
661
662 return IRQ_HANDLED;
663 }
664
665 /*
666 * For "byte-by-byte" block transactions:
667 * I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
668 * I2C read uses cmd=I801_I2C_BLOCK_DATA
669 */
670 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
671 union i2c_smbus_data *data,
672 char read_write, int command)
673 {
674 int i, len;
675 int smbcmd;
676 int status;
677 unsigned long result;
678 const struct i2c_adapter *adap = &priv->adapter;
679
680 if (command == I2C_SMBUS_BLOCK_PROC_CALL)
681 return -EOPNOTSUPP;
682
683 len = data->block[0];
684
685 if (read_write == I2C_SMBUS_WRITE) {
686 outb_p(len, SMBHSTDAT0(priv));
687 outb_p(data->block[1], SMBBLKDAT(priv));
688 }
689
690 if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
691 read_write == I2C_SMBUS_READ)
692 smbcmd = I801_I2C_BLOCK_DATA;
693 else
694 smbcmd = I801_BLOCK_DATA;
695
696 if (priv->features & FEATURE_IRQ) {
697 priv->is_read = (read_write == I2C_SMBUS_READ);
698 if (len == 1 && priv->is_read)
699 smbcmd |= SMBHSTCNT_LAST_BYTE;
700 priv->cmd = smbcmd | SMBHSTCNT_INTREN;
701 priv->len = len;
702 priv->count = 0;
703 priv->data = &data->block[1];
704
705 reinit_completion(&priv->done);
706 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
707 result = wait_for_completion_timeout(&priv->done, adap->timeout);
708 return result ? priv->status : -ETIMEDOUT;
709 }
710
711 if (len == 1 && read_write == I2C_SMBUS_READ)
712 smbcmd |= SMBHSTCNT_LAST_BYTE;
713 outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
714
715 for (i = 1; i <= len; i++) {
716 status = i801_wait_byte_done(priv);
717 if (status)
718 return status;
719
720 /*
721 * At transfer start i801_smbus_block_transaction() marks
722 * the block length as invalid. Check for this sentinel value
723 * and read the block length from SMBHSTDAT0.
724 */
725 if (len == SMBUS_LEN_SENTINEL) {
726 len = i801_get_block_len(priv);
727 if (len < 0) {
728 /* Recover */
729 while (inb_p(SMBHSTSTS(priv)) &
730 SMBHSTSTS_HOST_BUSY)
731 outb_p(SMBHSTSTS_BYTE_DONE,
732 SMBHSTSTS(priv));
733 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
734 return -EPROTO;
735 }
736 data->block[0] = len;
737 }
738
739 if (read_write == I2C_SMBUS_READ) {
740 data->block[i] = inb_p(SMBBLKDAT(priv));
741 if (i == len - 1)
742 outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
743 }
744
745 if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
746 outb_p(data->block[i+1], SMBBLKDAT(priv));
747
748 /* signals SMBBLKDAT ready */
749 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
750 }
751
752 return i801_wait_intr(priv);
753 }
754
755 static void i801_set_hstadd(struct i801_priv *priv, u8 addr, char read_write)
756 {
757 outb_p((addr << 1) | (read_write & 0x01), SMBHSTADD(priv));
758 }
759
760 /* Single value transaction function */
761 static int i801_simple_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
762 u8 addr, u8 hstcmd, char read_write, int command)
763 {
764 int xact, ret;
765
766 switch (command) {
767 case I2C_SMBUS_QUICK:
768 i801_set_hstadd(priv, addr, read_write);
769 xact = I801_QUICK;
770 break;
771 case I2C_SMBUS_BYTE:
772 i801_set_hstadd(priv, addr, read_write);
773 if (read_write == I2C_SMBUS_WRITE)
774 outb_p(hstcmd, SMBHSTCMD(priv));
775 xact = I801_BYTE;
776 break;
777 case I2C_SMBUS_BYTE_DATA:
778 i801_set_hstadd(priv, addr, read_write);
779 if (read_write == I2C_SMBUS_WRITE)
780 outb_p(data->byte, SMBHSTDAT0(priv));
781 outb_p(hstcmd, SMBHSTCMD(priv));
782 xact = I801_BYTE_DATA;
783 break;
784 case I2C_SMBUS_WORD_DATA:
785 i801_set_hstadd(priv, addr, read_write);
786 if (read_write == I2C_SMBUS_WRITE) {
787 outb_p(data->word & 0xff, SMBHSTDAT0(priv));
788 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
789 }
790 outb_p(hstcmd, SMBHSTCMD(priv));
791 xact = I801_WORD_DATA;
792 break;
793 case I2C_SMBUS_PROC_CALL:
794 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
795 outb_p(data->word & 0xff, SMBHSTDAT0(priv));
796 outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
797 outb_p(hstcmd, SMBHSTCMD(priv));
798 read_write = I2C_SMBUS_READ;
799 xact = I801_PROC_CALL;
800 break;
801 default:
802 pci_err(priv->pci_dev, "Unsupported transaction %d\n", command);
803 return -EOPNOTSUPP;
804 }
805
806 ret = i801_transaction(priv, xact);
807 if (ret || read_write == I2C_SMBUS_WRITE)
808 return ret;
809
810 switch (command) {
811 case I2C_SMBUS_BYTE:
812 case I2C_SMBUS_BYTE_DATA:
813 data->byte = inb_p(SMBHSTDAT0(priv));
814 break;
815 case I2C_SMBUS_WORD_DATA:
816 case I2C_SMBUS_PROC_CALL:
817 data->word = inb_p(SMBHSTDAT0(priv)) +
818 (inb_p(SMBHSTDAT1(priv)) << 8);
819 break;
820 }
821
822 return 0;
823 }
824
825 static int i801_smbus_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
826 u8 addr, u8 hstcmd, char read_write, int command)
827 {
828 if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA)
829 /* Mark block length as invalid */
830 data->block[0] = SMBUS_LEN_SENTINEL;
831 else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
832 return -EPROTO;
833
834 if (command == I2C_SMBUS_BLOCK_PROC_CALL)
835 /* Needs to be flagged as write transaction */
836 i801_set_hstadd(priv, addr, I2C_SMBUS_WRITE);
837 else
838 i801_set_hstadd(priv, addr, read_write);
839 outb_p(hstcmd, SMBHSTCMD(priv));
840
841 if (priv->features & FEATURE_BLOCK_BUFFER)
842 return i801_block_transaction_by_block(priv, data, read_write, command);
843 else
844 return i801_block_transaction_byte_by_byte(priv, data, read_write, command);
845 }
846
847 static int i801_i2c_block_transaction(struct i801_priv *priv, union i2c_smbus_data *data,
848 u8 addr, u8 hstcmd, char read_write, int command)
849 {
850 int result;
851 u8 hostc;
852
853 if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX)
854 return -EPROTO;
855 /*
856 * NB: page 240 of ICH5 datasheet shows that the R/#W bit should be cleared here,
857 * even when reading. However if SPD Write Disable is set (Lynx Point and later),
858 * the read will fail if we don't set the R/#W bit.
859 */
860 i801_set_hstadd(priv, addr,
861 priv->original_hstcfg & SMBHSTCFG_SPD_WD ? read_write : I2C_SMBUS_WRITE);
862
863 /* NB: page 240 of ICH5 datasheet shows that DATA1 is the cmd field when reading */
864 if (read_write == I2C_SMBUS_READ)
865 outb_p(hstcmd, SMBHSTDAT1(priv));
866 else
867 outb_p(hstcmd, SMBHSTCMD(priv));
868
869 if (read_write == I2C_SMBUS_WRITE) {
870 /* set I2C_EN bit in configuration register */
871 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
872 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
873 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
874 pci_err(priv->pci_dev, "I2C block read is unsupported!\n");
875 return -EOPNOTSUPP;
876 }
877
878 /* Block buffer isn't supported for I2C block transactions */
879 result = i801_block_transaction_byte_by_byte(priv, data, read_write, command);
880
881 /* restore saved configuration register value */
882 if (read_write == I2C_SMBUS_WRITE)
883 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
884
885 return result;
886 }
887
888 /* Return negative errno on error. */
889 static s32 i801_access(struct i2c_adapter *adap, u16 addr,
890 unsigned short flags, char read_write, u8 command,
891 int size, union i2c_smbus_data *data)
892 {
893 int hwpec, ret;
894 struct i801_priv *priv = i2c_get_adapdata(adap);
895
896 if (priv->acpi_reserved)
897 return -EBUSY;
898
899 pm_runtime_get_sync(&priv->pci_dev->dev);
900
901 ret = i801_check_pre(priv);
902 if (ret)
903 goto out;
904
905 hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
906 && size != I2C_SMBUS_QUICK
907 && size != I2C_SMBUS_I2C_BLOCK_DATA;
908
909 if (hwpec) /* enable/disable hardware PEC */
910 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
911 else
912 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
913 SMBAUXCTL(priv));
914
915 if (size == I2C_SMBUS_BLOCK_DATA || size == I2C_SMBUS_BLOCK_PROC_CALL)
916 ret = i801_smbus_block_transaction(priv, data, addr, command, read_write, size);
917 else if (size == I2C_SMBUS_I2C_BLOCK_DATA)
918 ret = i801_i2c_block_transaction(priv, data, addr, command, read_write, size);
919 else
920 ret = i801_simple_transaction(priv, data, addr, command, read_write, size);
921
922 ret = i801_check_post(priv, ret);
923
924 /* Some BIOSes don't like it when PEC is enabled at reboot or resume
925 * time, so we forcibly disable it after every transaction.
926 */
927 if (hwpec)
928 outb_p(inb_p(SMBAUXCTL(priv)) & ~SMBAUXCTL_CRC, SMBAUXCTL(priv));
929 out:
930 /*
931 * Unlock the SMBus device for use by BIOS/ACPI,
932 * and clear status flags if not done already.
933 */
934 outb_p(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv));
935
936 pm_runtime_mark_last_busy(&priv->pci_dev->dev);
937 pm_runtime_put_autosuspend(&priv->pci_dev->dev);
938 return ret;
939 }
940
941
942 static u32 i801_func(struct i2c_adapter *adapter)
943 {
944 struct i801_priv *priv = i2c_get_adapdata(adapter);
945
946 return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
947 I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
948 I2C_FUNC_SMBUS_PROC_CALL |
949 I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
950 ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
951 ((priv->features & FEATURE_BLOCK_PROC) ?
952 I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) |
953 ((priv->features & FEATURE_I2C_BLOCK_READ) ?
954 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
955 ((priv->features & FEATURE_HOST_NOTIFY) ?
956 I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
957 }
958
959 static void i801_enable_host_notify(struct i2c_adapter *adapter)
960 {
961 struct i801_priv *priv = i2c_get_adapdata(adapter);
962
963 if (!(priv->features & FEATURE_HOST_NOTIFY))
964 return;
965
966 /*
967 * Enable host notify interrupt and block the generation of interrupt
968 * from the SMB_ALERT signal because the driver does not support
969 * SMBus Alert.
970 */
971 outb_p(SMBSLVCMD_HST_NTFY_INTREN | SMBSLVCMD_SMBALERT_DISABLE |
972 priv->original_slvcmd, SMBSLVCMD(priv));
973
974 /* clear Host Notify bit to allow a new notification */
975 outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
976 }
977
978 static void i801_disable_host_notify(struct i801_priv *priv)
979 {
980 if (!(priv->features & FEATURE_HOST_NOTIFY))
981 return;
982
983 outb_p(priv->original_slvcmd, SMBSLVCMD(priv));
984 }
985
986 static const struct i2c_algorithm smbus_algorithm = {
987 .smbus_xfer = i801_access,
988 .functionality = i801_func,
989 };
990
991 #define FEATURES_ICH4 (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER | \
992 FEATURE_HOST_NOTIFY)
993 #define FEATURES_ICH5 (FEATURES_ICH4 | FEATURE_BLOCK_PROC | \
994 FEATURE_I2C_BLOCK_READ | FEATURE_IRQ)
995
996 static const struct pci_device_id i801_ids[] = {
997 { PCI_DEVICE_DATA(INTEL, 82801AA_3, 0) },
998 { PCI_DEVICE_DATA(INTEL, 82801AB_3, 0) },
999 { PCI_DEVICE_DATA(INTEL, 82801BA_2, 0) },
1000 { PCI_DEVICE_DATA(INTEL, 82801CA_3, FEATURE_HOST_NOTIFY) },
1001 { PCI_DEVICE_DATA(INTEL, 82801DB_3, FEATURES_ICH4) },
1002 { PCI_DEVICE_DATA(INTEL, 82801EB_3, FEATURES_ICH5) },
1003 { PCI_DEVICE_DATA(INTEL, ESB_4, FEATURES_ICH5) },
1004 { PCI_DEVICE_DATA(INTEL, ICH6_16, FEATURES_ICH5) },
1005 { PCI_DEVICE_DATA(INTEL, ICH7_17, FEATURES_ICH5) },
1006 { PCI_DEVICE_DATA(INTEL, ESB2_17, FEATURES_ICH5) },
1007 { PCI_DEVICE_DATA(INTEL, ICH8_5, FEATURES_ICH5) },
1008 { PCI_DEVICE_DATA(INTEL, ICH9_6, FEATURES_ICH5) },
1009 { PCI_DEVICE_DATA(INTEL, EP80579_1, FEATURES_ICH5) },
1010 { PCI_DEVICE_DATA(INTEL, ICH10_4, FEATURES_ICH5) },
1011 { PCI_DEVICE_DATA(INTEL, ICH10_5, FEATURES_ICH5) },
1012 { PCI_DEVICE_DATA(INTEL, 5_3400_SERIES_SMBUS, FEATURES_ICH5) },
1013 { PCI_DEVICE_DATA(INTEL, COUGARPOINT_SMBUS, FEATURES_ICH5) },
1014 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS, FEATURES_ICH5) },
1015 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF0, FEATURES_ICH5 | FEATURE_IDF) },
1016 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF1, FEATURES_ICH5 | FEATURE_IDF) },
1017 { PCI_DEVICE_DATA(INTEL, PATSBURG_SMBUS_IDF2, FEATURES_ICH5 | FEATURE_IDF) },
1018 { PCI_DEVICE_DATA(INTEL, DH89XXCC_SMBUS, FEATURES_ICH5) },
1019 { PCI_DEVICE_DATA(INTEL, PANTHERPOINT_SMBUS, FEATURES_ICH5) },
1020 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_SMBUS, FEATURES_ICH5) },
1021 { PCI_DEVICE_DATA(INTEL, LYNXPOINT_LP_SMBUS, FEATURES_ICH5) },
1022 { PCI_DEVICE_DATA(INTEL, AVOTON_SMBUS, FEATURES_ICH5) },
1023 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS, FEATURES_ICH5) },
1024 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS0, FEATURES_ICH5 | FEATURE_IDF) },
1025 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS1, FEATURES_ICH5 | FEATURE_IDF) },
1026 { PCI_DEVICE_DATA(INTEL, WELLSBURG_SMBUS_MS2, FEATURES_ICH5 | FEATURE_IDF) },
1027 { PCI_DEVICE_DATA(INTEL, COLETOCREEK_SMBUS, FEATURES_ICH5) },
1028 { PCI_DEVICE_DATA(INTEL, GEMINILAKE_SMBUS, FEATURES_ICH5) },
1029 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_SMBUS, FEATURES_ICH5) },
1030 { PCI_DEVICE_DATA(INTEL, WILDCATPOINT_LP_SMBUS, FEATURES_ICH5) },
1031 { PCI_DEVICE_DATA(INTEL, BAYTRAIL_SMBUS, FEATURES_ICH5) },
1032 { PCI_DEVICE_DATA(INTEL, BRASWELL_SMBUS, FEATURES_ICH5) },
1033 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1034 { PCI_DEVICE_DATA(INTEL, SUNRISEPOINT_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1035 { PCI_DEVICE_DATA(INTEL, CDF_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1036 { PCI_DEVICE_DATA(INTEL, DNV_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1037 { PCI_DEVICE_DATA(INTEL, EBG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1038 { PCI_DEVICE_DATA(INTEL, BROXTON_SMBUS, FEATURES_ICH5) },
1039 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1040 { PCI_DEVICE_DATA(INTEL, LEWISBURG_SSKU_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1041 { PCI_DEVICE_DATA(INTEL, KABYLAKE_PCH_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1042 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1043 { PCI_DEVICE_DATA(INTEL, CANNONLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1044 { PCI_DEVICE_DATA(INTEL, ICELAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1045 { PCI_DEVICE_DATA(INTEL, ICELAKE_N_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1046 { PCI_DEVICE_DATA(INTEL, COMETLAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1047 { PCI_DEVICE_DATA(INTEL, COMETLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1048 { PCI_DEVICE_DATA(INTEL, COMETLAKE_V_SMBUS, FEATURES_ICH5 | FEATURE_TCO_SPT) },
1049 { PCI_DEVICE_DATA(INTEL, ELKHART_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1050 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_LP_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1051 { PCI_DEVICE_DATA(INTEL, TIGERLAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1052 { PCI_DEVICE_DATA(INTEL, JASPER_LAKE_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1053 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1054 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1055 { PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1056 { PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1057 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1058 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_SOC_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1059 { PCI_DEVICE_DATA(INTEL, METEOR_LAKE_PCH_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1060 { PCI_DEVICE_DATA(INTEL, BIRCH_STREAM_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1061 { PCI_DEVICE_DATA(INTEL, ARROW_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1062 { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1063 { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) },
1064 { 0, }
1065 };
1066
1067 MODULE_DEVICE_TABLE(pci, i801_ids);
1068
1069 #if defined CONFIG_X86 && defined CONFIG_DMI
1070 static unsigned char apanel_addr __ro_after_init;
1071
1072 /* Scan the system ROM for the signature "FJKEYINF" */
1073 static __init const void __iomem *bios_signature(const void __iomem *bios)
1074 {
1075 ssize_t offset;
1076 const unsigned char signature[] = "FJKEYINF";
1077
1078 for (offset = 0; offset < 0x10000; offset += 0x10) {
1079 if (check_signature(bios + offset, signature,
1080 sizeof(signature)-1))
1081 return bios + offset;
1082 }
1083 return NULL;
1084 }
1085
1086 static void __init input_apanel_init(void)
1087 {
1088 void __iomem *bios;
1089 const void __iomem *p;
1090
1091 bios = ioremap(0xF0000, 0x10000); /* Can't fail */
1092 p = bios_signature(bios);
1093 if (p) {
1094 /* just use the first address */
1095 apanel_addr = readb(p + 8 + 3) >> 1;
1096 }
1097 iounmap(bios);
1098 }
1099
1100 struct dmi_onboard_device_info {
1101 const char *name;
1102 u8 type;
1103 unsigned short i2c_addr;
1104 const char *i2c_type;
1105 };
1106
1107 static const struct dmi_onboard_device_info dmi_devices[] = {
1108 { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
1109 { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
1110 { "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
1111 };
1112
1113 static void dmi_check_onboard_device(u8 type, const char *name,
1114 struct i2c_adapter *adap)
1115 {
1116 int i;
1117 struct i2c_board_info info;
1118
1119 for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
1120 /* & ~0x80, ignore enabled/disabled bit */
1121 if ((type & ~0x80) != dmi_devices[i].type)
1122 continue;
1123 if (strcasecmp(name, dmi_devices[i].name))
1124 continue;
1125
1126 memset(&info, 0, sizeof(struct i2c_board_info));
1127 info.addr = dmi_devices[i].i2c_addr;
1128 strscpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
1129 i2c_new_client_device(adap, &info);
1130 break;
1131 }
1132 }
1133
1134 /* We use our own function to check for onboard devices instead of
1135 dmi_find_device() as some buggy BIOS's have the devices we are interested
1136 in marked as disabled */
1137 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
1138 {
1139 int i, count;
1140
1141 if (dm->type != DMI_ENTRY_ONBOARD_DEVICE)
1142 return;
1143
1144 count = (dm->length - sizeof(struct dmi_header)) / 2;
1145 for (i = 0; i < count; i++) {
1146 const u8 *d = (char *)(dm + 1) + (i * 2);
1147 const char *name = ((char *) dm) + dm->length;
1148 u8 type = d[0];
1149 u8 s = d[1];
1150
1151 if (!s)
1152 continue;
1153 s--;
1154 while (s > 0 && name[0]) {
1155 name += strlen(name) + 1;
1156 s--;
1157 }
1158 if (name[0] == 0) /* Bogus string reference */
1159 continue;
1160
1161 dmi_check_onboard_device(type, name, adap);
1162 }
1163 }
1164
1165 /* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */
1166 static const char *const acpi_smo8800_ids[] = {
1167 "SMO8800",
1168 "SMO8801",
1169 "SMO8810",
1170 "SMO8811",
1171 "SMO8820",
1172 "SMO8821",
1173 "SMO8830",
1174 "SMO8831",
1175 };
1176
1177 static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle,
1178 u32 nesting_level,
1179 void *context,
1180 void **return_value)
1181 {
1182 struct acpi_device_info *info;
1183 acpi_status status;
1184 char *hid;
1185 int i;
1186
1187 status = acpi_get_object_info(obj_handle, &info);
1188 if (ACPI_FAILURE(status))
1189 return AE_OK;
1190
1191 if (!(info->valid & ACPI_VALID_HID))
1192 goto smo88xx_not_found;
1193
1194 hid = info->hardware_id.string;
1195 if (!hid)
1196 goto smo88xx_not_found;
1197
1198 i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid);
1199 if (i < 0)
1200 goto smo88xx_not_found;
1201
1202 kfree(info);
1203
1204 *return_value = NULL;
1205 return AE_CTRL_TERMINATE;
1206
1207 smo88xx_not_found:
1208 kfree(info);
1209 return AE_OK;
1210 }
1211
1212 static bool is_dell_system_with_lis3lv02d(void)
1213 {
1214 void *err = ERR_PTR(-ENOENT);
1215
1216 if (!dmi_match(DMI_SYS_VENDOR, "Dell Inc."))
1217 return false;
1218
1219 /*
1220 * Check that ACPI device SMO88xx is present and is functioning.
1221 * Function acpi_get_devices() already filters all ACPI devices
1222 * which are not present or are not functioning.
1223 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d
1224 * accelerometer but unfortunately ACPI does not provide any other
1225 * information (like I2C address).
1226 */
1227 acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL, &err);
1228
1229 return !IS_ERR(err);
1230 }
1231
1232 /*
1233 * Accelerometer's I2C address is not specified in DMI nor ACPI,
1234 * so it is needed to define mapping table based on DMI product names.
1235 */
1236 static const struct {
1237 const char *dmi_product_name;
1238 unsigned short i2c_addr;
1239 } dell_lis3lv02d_devices[] = {
1240 /*
1241 * Dell platform team told us that these Latitude devices have
1242 * ST microelectronics accelerometer at I2C address 0x29.
1243 */
1244 { "Latitude E5250", 0x29 },
1245 { "Latitude E5450", 0x29 },
1246 { "Latitude E5550", 0x29 },
1247 { "Latitude E6440", 0x29 },
1248 { "Latitude E6440 ATG", 0x29 },
1249 { "Latitude E6540", 0x29 },
1250 /*
1251 * Additional individual entries were added after verification.
1252 */
1253 { "Latitude 5480", 0x29 },
1254 { "Precision 3540", 0x29 },
1255 { "Vostro V131", 0x1d },
1256 { "Vostro 5568", 0x29 },
1257 { "XPS 15 7590", 0x29 },
1258 };
1259
1260 static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
1261 {
1262 struct i2c_board_info info;
1263 const char *dmi_product_name;
1264 int i;
1265
1266 dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
1267 for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) {
1268 if (strcmp(dmi_product_name,
1269 dell_lis3lv02d_devices[i].dmi_product_name) == 0)
1270 break;
1271 }
1272
1273 if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
1274 dev_warn(&priv->pci_dev->dev,
1275 "Accelerometer lis3lv02d is present on SMBus but its"
1276 " address is unknown, skipping registration\n");
1277 return;
1278 }
1279
1280 memset(&info, 0, sizeof(struct i2c_board_info));
1281 info.addr = dell_lis3lv02d_devices[i].i2c_addr;
1282 strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
1283 i2c_new_client_device(&priv->adapter, &info);
1284 }
1285
1286 /* Register optional targets */
1287 static void i801_probe_optional_targets(struct i801_priv *priv)
1288 {
1289 /* Only register targets on main SMBus channel */
1290 if (priv->features & FEATURE_IDF)
1291 return;
1292
1293 if (apanel_addr) {
1294 struct i2c_board_info info = {
1295 .addr = apanel_addr,
1296 .type = "fujitsu_apanel",
1297 };
1298
1299 i2c_new_client_device(&priv->adapter, &info);
1300 }
1301
1302 if (dmi_name_in_vendors("FUJITSU"))
1303 dmi_walk(dmi_check_onboard_devices, &priv->adapter);
1304
1305 if (is_dell_system_with_lis3lv02d())
1306 register_dell_lis3lv02d_i2c_device(priv);
1307
1308 /* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
1309 #ifdef CONFIG_I2C_I801_MUX
1310 if (!priv->mux_pdev)
1311 #endif
1312 i2c_register_spd(&priv->adapter);
1313 }
1314 #else
1315 static void __init input_apanel_init(void) {}
1316 static void i801_probe_optional_targets(struct i801_priv *priv) {}
1317 #endif /* CONFIG_X86 && CONFIG_DMI */
1318
1319 #ifdef CONFIG_I2C_I801_MUX
1320 static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
1321 .gpio_chip = "gpio_ich",
1322 .values = { 0x02, 0x03 },
1323 .n_values = 2,
1324 .gpios = { 52, 53 },
1325 .n_gpios = 2,
1326 };
1327
1328 static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
1329 .gpio_chip = "gpio_ich",
1330 .values = { 0x02, 0x03, 0x01 },
1331 .n_values = 3,
1332 .gpios = { 52, 53 },
1333 .n_gpios = 2,
1334 };
1335
1336 static const struct dmi_system_id mux_dmi_table[] = {
1337 {
1338 .matches = {
1339 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1340 DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
1341 },
1342 .driver_data = &i801_mux_config_asus_z8_d12,
1343 },
1344 {
1345 .matches = {
1346 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1347 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
1348 },
1349 .driver_data = &i801_mux_config_asus_z8_d12,
1350 },
1351 {
1352 .matches = {
1353 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1354 DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
1355 },
1356 .driver_data = &i801_mux_config_asus_z8_d12,
1357 },
1358 {
1359 .matches = {
1360 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1361 DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
1362 },
1363 .driver_data = &i801_mux_config_asus_z8_d12,
1364 },
1365 {
1366 .matches = {
1367 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1368 DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
1369 },
1370 .driver_data = &i801_mux_config_asus_z8_d12,
1371 },
1372 {
1373 .matches = {
1374 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1375 DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
1376 },
1377 .driver_data = &i801_mux_config_asus_z8_d12,
1378 },
1379 {
1380 .matches = {
1381 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1382 DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
1383 },
1384 .driver_data = &i801_mux_config_asus_z8_d18,
1385 },
1386 {
1387 .matches = {
1388 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1389 DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
1390 },
1391 .driver_data = &i801_mux_config_asus_z8_d18,
1392 },
1393 {
1394 .matches = {
1395 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1396 DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
1397 },
1398 .driver_data = &i801_mux_config_asus_z8_d12,
1399 },
1400 { }
1401 };
1402
1403 static int i801_notifier_call(struct notifier_block *nb, unsigned long action,
1404 void *data)
1405 {
1406 struct i801_priv *priv = container_of(nb, struct i801_priv, mux_notifier_block);
1407 struct device *dev = data;
1408
1409 if (action != BUS_NOTIFY_ADD_DEVICE ||
1410 dev->type != &i2c_adapter_type ||
1411 i2c_root_adapter(dev) != &priv->adapter)
1412 return NOTIFY_DONE;
1413
1414 /* Call i2c_register_spd for muxed child segments */
1415 i2c_register_spd(to_i2c_adapter(dev));
1416
1417 return NOTIFY_OK;
1418 }
1419
1420 /* Setup multiplexing if needed */
1421 static void i801_add_mux(struct i801_priv *priv)
1422 {
1423 struct device *dev = &priv->adapter.dev;
1424 const struct i801_mux_config *mux_config;
1425 struct i2c_mux_gpio_platform_data gpio_data;
1426 struct gpiod_lookup_table *lookup;
1427 const struct dmi_system_id *id;
1428 int i;
1429
1430 id = dmi_first_match(mux_dmi_table);
1431 if (!id)
1432 return;
1433
1434 mux_config = id->driver_data;
1435
1436 /* Prepare the platform data */
1437 memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
1438 gpio_data.parent = priv->adapter.nr;
1439 gpio_data.values = mux_config->values;
1440 gpio_data.n_values = mux_config->n_values;
1441 gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
1442
1443 /* Register GPIO descriptor lookup table */
1444 lookup = devm_kzalloc(dev,
1445 struct_size(lookup, table, mux_config->n_gpios + 1),
1446 GFP_KERNEL);
1447 if (!lookup)
1448 return;
1449 lookup->dev_id = "i2c-mux-gpio";
1450 for (i = 0; i < mux_config->n_gpios; i++)
1451 lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip,
1452 mux_config->gpios[i], "mux", 0);
1453 gpiod_add_lookup_table(lookup);
1454
1455 priv->mux_notifier_block.notifier_call = i801_notifier_call;
1456 if (bus_register_notifier(&i2c_bus_type, &priv->mux_notifier_block))
1457 return;
1458 /*
1459 * Register the mux device, we use PLATFORM_DEVID_NONE here
1460 * because since we are referring to the GPIO chip by name we are
1461 * anyways in deep trouble if there is more than one of these
1462 * devices, and there should likely only be one platform controller
1463 * hub.
1464 */
1465 priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
1466 PLATFORM_DEVID_NONE, &gpio_data,
1467 sizeof(struct i2c_mux_gpio_platform_data));
1468 if (IS_ERR(priv->mux_pdev)) {
1469 gpiod_remove_lookup_table(lookup);
1470 devm_kfree(dev, lookup);
1471 dev_err(dev, "Failed to register i2c-mux-gpio device\n");
1472 } else {
1473 priv->lookup = lookup;
1474 }
1475 }
1476
1477 static void i801_del_mux(struct i801_priv *priv)
1478 {
1479 bus_unregister_notifier(&i2c_bus_type, &priv->mux_notifier_block);
1480 platform_device_unregister(priv->mux_pdev);
1481 gpiod_remove_lookup_table(priv->lookup);
1482 }
1483 #else
1484 static inline void i801_add_mux(struct i801_priv *priv) { }
1485 static inline void i801_del_mux(struct i801_priv *priv) { }
1486 #endif
1487
1488 static struct platform_device *
1489 i801_add_tco_spt(struct pci_dev *pci_dev, struct resource *tco_res)
1490 {
1491 static const struct itco_wdt_platform_data pldata = {
1492 .name = "Intel PCH",
1493 .version = 4,
1494 };
1495 struct resource *res;
1496 int ret;
1497
1498 /*
1499 * We must access the NO_REBOOT bit over the Primary to Sideband
1500 * (P2SB) bridge.
1501 */
1502
1503 res = &tco_res[1];
1504 ret = p2sb_bar(pci_dev->bus, 0, res);
1505 if (ret)
1506 return ERR_PTR(ret);
1507
1508 if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
1509 res->start += SBREG_SMBCTRL_DNV;
1510 else
1511 res->start += SBREG_SMBCTRL;
1512
1513 res->end = res->start + 3;
1514
1515 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
1516 tco_res, 2, &pldata, sizeof(pldata));
1517 }
1518
1519 static struct platform_device *
1520 i801_add_tco_cnl(struct pci_dev *pci_dev, struct resource *tco_res)
1521 {
1522 static const struct itco_wdt_platform_data pldata = {
1523 .name = "Intel PCH",
1524 .version = 6,
1525 };
1526
1527 return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
1528 tco_res, 1, &pldata, sizeof(pldata));
1529 }
1530
1531 static void i801_add_tco(struct i801_priv *priv)
1532 {
1533 struct pci_dev *pci_dev = priv->pci_dev;
1534 struct resource tco_res[2], *res;
1535 u32 tco_base, tco_ctl;
1536
1537 /* If we have ACPI based watchdog use that instead */
1538 if (acpi_has_watchdog())
1539 return;
1540
1541 if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
1542 return;
1543
1544 pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
1545 pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
1546 if (!(tco_ctl & TCOCTL_EN))
1547 return;
1548
1549 memset(tco_res, 0, sizeof(tco_res));
1550 /*
1551 * Always populate the main iTCO IO resource here. The second entry
1552 * for NO_REBOOT MMIO is filled by the SPT specific function.
1553 */
1554 res = &tco_res[0];
1555 res->start = tco_base & ~1;
1556 res->end = res->start + 32 - 1;
1557 res->flags = IORESOURCE_IO;
1558
1559 if (priv->features & FEATURE_TCO_CNL)
1560 priv->tco_pdev = i801_add_tco_cnl(pci_dev, tco_res);
1561 else
1562 priv->tco_pdev = i801_add_tco_spt(pci_dev, tco_res);
1563
1564 if (IS_ERR(priv->tco_pdev))
1565 dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
1566 }
1567
1568 #ifdef CONFIG_ACPI
1569 static bool i801_acpi_is_smbus_ioport(const struct i801_priv *priv,
1570 acpi_physical_address address)
1571 {
1572 return address >= priv->smba &&
1573 address <= pci_resource_end(priv->pci_dev, SMBBAR);
1574 }
1575
1576 static acpi_status
1577 i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
1578 u64 *value, void *handler_context, void *region_context)
1579 {
1580 struct i801_priv *priv = handler_context;
1581 struct pci_dev *pdev = priv->pci_dev;
1582 acpi_status status;
1583
1584 /*
1585 * Once BIOS AML code touches the OpRegion we warn and inhibit any
1586 * further access from the driver itself. This device is now owned
1587 * by the system firmware.
1588 */
1589 i2c_lock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
1590
1591 if (!priv->acpi_reserved && i801_acpi_is_smbus_ioport(priv, address)) {
1592 priv->acpi_reserved = true;
1593
1594 dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
1595 dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
1596
1597 /*
1598 * BIOS is accessing the host controller so prevent it from
1599 * suspending automatically from now on.
1600 */
1601 pm_runtime_get_sync(&pdev->dev);
1602 }
1603
1604 if ((function & ACPI_IO_MASK) == ACPI_READ)
1605 status = acpi_os_read_port(address, (u32 *)value, bits);
1606 else
1607 status = acpi_os_write_port(address, (u32)*value, bits);
1608
1609 i2c_unlock_bus(&priv->adapter, I2C_LOCK_SEGMENT);
1610
1611 return status;
1612 }
1613
1614 static int i801_acpi_probe(struct i801_priv *priv)
1615 {
1616 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
1617 acpi_status status;
1618
1619 status = acpi_install_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO,
1620 i801_acpi_io_handler, NULL, priv);
1621 if (ACPI_SUCCESS(status))
1622 return 0;
1623
1624 return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
1625 }
1626
1627 static void i801_acpi_remove(struct i801_priv *priv)
1628 {
1629 acpi_handle ah = ACPI_HANDLE(&priv->pci_dev->dev);
1630
1631 acpi_remove_address_space_handler(ah, ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
1632 }
1633 #else
1634 static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
1635 static inline void i801_acpi_remove(struct i801_priv *priv) { }
1636 #endif
1637
1638 static void i801_setup_hstcfg(struct i801_priv *priv)
1639 {
1640 unsigned char hstcfg = priv->original_hstcfg;
1641
1642 hstcfg &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
1643 hstcfg |= SMBHSTCFG_HST_EN;
1644 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
1645 }
1646
1647 static void i801_restore_regs(struct i801_priv *priv)
1648 {
1649 outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
1650 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
1651 }
1652
1653 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
1654 {
1655 int err, i;
1656 struct i801_priv *priv;
1657
1658 priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
1659 if (!priv)
1660 return -ENOMEM;
1661
1662 i2c_set_adapdata(&priv->adapter, priv);
1663 priv->adapter.owner = THIS_MODULE;
1664 priv->adapter.class = I2C_CLASS_HWMON;
1665 priv->adapter.algo = &smbus_algorithm;
1666 priv->adapter.dev.parent = &dev->dev;
1667 acpi_use_parent_companion(&priv->adapter.dev);
1668 priv->adapter.retries = 3;
1669
1670 priv->pci_dev = dev;
1671 priv->features = id->driver_data;
1672
1673 /* Disable features on user request */
1674 for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
1675 if (priv->features & disable_features & (1 << i))
1676 dev_notice(&dev->dev, "%s disabled by user\n",
1677 i801_feature_names[i]);
1678 }
1679 priv->features &= ~disable_features;
1680
1681 /* The block process call uses block buffer mode */
1682 if (!(priv->features & FEATURE_BLOCK_BUFFER))
1683 priv->features &= ~FEATURE_BLOCK_PROC;
1684
1685 err = pcim_enable_device(dev);
1686 if (err) {
1687 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
1688 err);
1689 return err;
1690 }
1691 pcim_pin_device(dev);
1692
1693 /* Determine the address of the SMBus area */
1694 priv->smba = pci_resource_start(dev, SMBBAR);
1695 if (!priv->smba) {
1696 dev_err(&dev->dev,
1697 "SMBus base address uninitialized, upgrade BIOS\n");
1698 return -ENODEV;
1699 }
1700
1701 if (i801_acpi_probe(priv))
1702 return -ENODEV;
1703
1704 err = pcim_iomap_regions(dev, 1 << SMBBAR, DRV_NAME);
1705 if (err) {
1706 dev_err(&dev->dev,
1707 "Failed to request SMBus region 0x%lx-0x%Lx\n",
1708 priv->smba,
1709 (unsigned long long)pci_resource_end(dev, SMBBAR));
1710 i801_acpi_remove(priv);
1711 return err;
1712 }
1713
1714 pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &priv->original_hstcfg);
1715 i801_setup_hstcfg(priv);
1716 if (!(priv->original_hstcfg & SMBHSTCFG_HST_EN))
1717 dev_info(&dev->dev, "Enabling SMBus device\n");
1718
1719 if (priv->original_hstcfg & SMBHSTCFG_SMB_SMI_EN) {
1720 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
1721 /* Disable SMBus interrupt feature if SMBus using SMI# */
1722 priv->features &= ~FEATURE_IRQ;
1723 }
1724 if (priv->original_hstcfg & SMBHSTCFG_SPD_WD)
1725 dev_info(&dev->dev, "SPD Write Disable is set\n");
1726
1727 /* Clear special mode bits */
1728 if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
1729 outb_p(inb_p(SMBAUXCTL(priv)) &
1730 ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
1731
1732 /* Default timeout in interrupt mode: 200 ms */
1733 priv->adapter.timeout = HZ / 5;
1734
1735 if (dev->irq == IRQ_NOTCONNECTED)
1736 priv->features &= ~FEATURE_IRQ;
1737
1738 if (priv->features & FEATURE_IRQ) {
1739 u16 pcists;
1740
1741 /* Complain if an interrupt is already pending */
1742 pci_read_config_word(priv->pci_dev, PCI_STATUS, &pcists);
1743 if (pcists & PCI_STATUS_INTERRUPT)
1744 dev_warn(&dev->dev, "An interrupt is pending!\n");
1745 }
1746
1747 if (priv->features & FEATURE_IRQ) {
1748 init_completion(&priv->done);
1749
1750 err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
1751 IRQF_SHARED, DRV_NAME, priv);
1752 if (err) {
1753 dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
1754 dev->irq, err);
1755 priv->features &= ~FEATURE_IRQ;
1756 }
1757 }
1758 dev_info(&dev->dev, "SMBus using %s\n",
1759 priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
1760
1761 /* Host notification uses an interrupt */
1762 if (!(priv->features & FEATURE_IRQ))
1763 priv->features &= ~FEATURE_HOST_NOTIFY;
1764
1765 /* Remember original Interrupt and Host Notify settings */
1766 priv->original_hstcnt = inb_p(SMBHSTCNT(priv)) & ~SMBHSTCNT_KILL;
1767 if (priv->features & FEATURE_HOST_NOTIFY)
1768 priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
1769
1770 i801_add_tco(priv);
1771
1772 /*
1773 * adapter.name is used by platform code to find the main I801 adapter
1774 * to instantiante i2c_clients, do not change.
1775 */
1776 snprintf(priv->adapter.name, sizeof(priv->adapter.name),
1777 "SMBus %s adapter at %04lx",
1778 (priv->features & FEATURE_IDF) ? "I801 IDF" : "I801",
1779 priv->smba);
1780
1781 err = i2c_add_adapter(&priv->adapter);
1782 if (err) {
1783 platform_device_unregister(priv->tco_pdev);
1784 i801_acpi_remove(priv);
1785 i801_restore_regs(priv);
1786 return err;
1787 }
1788
1789 i801_enable_host_notify(&priv->adapter);
1790
1791 /* We ignore errors - multiplexing is optional */
1792 i801_add_mux(priv);
1793 i801_probe_optional_targets(priv);
1794
1795 pci_set_drvdata(dev, priv);
1796
1797 dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
1798 pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
1799 pm_runtime_use_autosuspend(&dev->dev);
1800 pm_runtime_put_autosuspend(&dev->dev);
1801 pm_runtime_allow(&dev->dev);
1802
1803 return 0;
1804 }
1805
1806 static void i801_remove(struct pci_dev *dev)
1807 {
1808 struct i801_priv *priv = pci_get_drvdata(dev);
1809
1810 i801_disable_host_notify(priv);
1811 i801_del_mux(priv);
1812 i2c_del_adapter(&priv->adapter);
1813 i801_acpi_remove(priv);
1814
1815 platform_device_unregister(priv->tco_pdev);
1816
1817 /* if acpi_reserved is set then usage_count is incremented already */
1818 if (!priv->acpi_reserved)
1819 pm_runtime_get_noresume(&dev->dev);
1820
1821 i801_restore_regs(priv);
1822
1823 /*
1824 * do not call pci_disable_device(dev) since it can cause hard hangs on
1825 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
1826 */
1827 }
1828
1829 static void i801_shutdown(struct pci_dev *dev)
1830 {
1831 struct i801_priv *priv = pci_get_drvdata(dev);
1832
1833 i801_disable_host_notify(priv);
1834 /* Restore config registers to avoid hard hang on some systems */
1835 i801_restore_regs(priv);
1836 }
1837
1838 static int i801_suspend(struct device *dev)
1839 {
1840 struct i801_priv *priv = dev_get_drvdata(dev);
1841
1842 i2c_mark_adapter_suspended(&priv->adapter);
1843 i801_restore_regs(priv);
1844
1845 return 0;
1846 }
1847
1848 static int i801_resume(struct device *dev)
1849 {
1850 struct i801_priv *priv = dev_get_drvdata(dev);
1851
1852 i801_setup_hstcfg(priv);
1853 i801_enable_host_notify(&priv->adapter);
1854 i2c_mark_adapter_resumed(&priv->adapter);
1855
1856 return 0;
1857 }
1858
1859 static DEFINE_SIMPLE_DEV_PM_OPS(i801_pm_ops, i801_suspend, i801_resume);
1860
1861 static struct pci_driver i801_driver = {
1862 .name = DRV_NAME,
1863 .id_table = i801_ids,
1864 .probe = i801_probe,
1865 .remove = i801_remove,
1866 .shutdown = i801_shutdown,
1867 .driver = {
1868 .pm = pm_sleep_ptr(&i801_pm_ops),
1869 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1870 },
1871 };
1872
1873 static int __init i2c_i801_init(struct pci_driver *drv)
1874 {
1875 if (dmi_name_in_vendors("FUJITSU"))
1876 input_apanel_init();
1877 return pci_register_driver(drv);
1878 }
1879
1880 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
1881 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
1882 MODULE_DESCRIPTION("I801 SMBus driver");
1883 MODULE_LICENSE("GPL");
1884
1885 module_driver(i801_driver, i2c_i801_init, pci_unregister_driver);
Kernel DRM miscellaneous fixes and cross-tree changes