drm/client: Fix drm client endless Kconfig loop

[drm/drm-misc.git] / drivers / iio / adc / nau7802.c

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Driver for the Nuvoton NAU7802 ADC
 *
 * Copyright 2013 Free Electrons
 */

#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/wait.h>
#include <linux/log2.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>

#define NAU7802_REG_PUCTRL      0x00
#define NAU7802_PUCTRL_RR(x)            (x << 0)
#define NAU7802_PUCTRL_RR_BIT           NAU7802_PUCTRL_RR(1)
#define NAU7802_PUCTRL_PUD(x)           (x << 1)
#define NAU7802_PUCTRL_PUD_BIT          NAU7802_PUCTRL_PUD(1)
#define NAU7802_PUCTRL_PUA(x)           (x << 2)
#define NAU7802_PUCTRL_PUA_BIT          NAU7802_PUCTRL_PUA(1)
#define NAU7802_PUCTRL_PUR(x)           (x << 3)
#define NAU7802_PUCTRL_PUR_BIT          NAU7802_PUCTRL_PUR(1)
#define NAU7802_PUCTRL_CS(x)            (x << 4)
#define NAU7802_PUCTRL_CS_BIT           NAU7802_PUCTRL_CS(1)
#define NAU7802_PUCTRL_CR(x)            (x << 5)
#define NAU7802_PUCTRL_CR_BIT           NAU7802_PUCTRL_CR(1)
#define NAU7802_PUCTRL_AVDDS(x)         (x << 7)
#define NAU7802_PUCTRL_AVDDS_BIT        NAU7802_PUCTRL_AVDDS(1)
#define NAU7802_REG_CTRL1       0x01
#define NAU7802_CTRL1_VLDO(x)           (x << 3)
#define NAU7802_CTRL1_GAINS(x)          (x)
#define NAU7802_CTRL1_GAINS_BITS        0x07
#define NAU7802_REG_CTRL2       0x02
#define NAU7802_CTRL2_CHS(x)            (x << 7)
#define NAU7802_CTRL2_CRS(x)            (x << 4)
#define NAU7802_SAMP_FREQ_320   0x07
#define NAU7802_CTRL2_CHS_BIT           NAU7802_CTRL2_CHS(1)
#define NAU7802_REG_ADC_B2      0x12
#define NAU7802_REG_ADC_B1      0x13
#define NAU7802_REG_ADC_B0      0x14
#define NAU7802_REG_ADC_CTRL    0x15

#define NAU7802_MIN_CONVERSIONS 6

struct nau7802_state {
        struct i2c_client       *client;
        s32                     last_value;
        struct mutex            lock;
        struct mutex            data_lock;
        u32                     vref_mv;
        u32                     conversion_count;
        u32                     min_conversions;
        u8                      sample_rate;
        u32                     scale_avail[8];
        struct completion       value_ok;
};

#define NAU7802_CHANNEL(chan) {                                 \
        .type = IIO_VOLTAGE,                                    \
        .indexed = 1,                                           \
        .channel = (chan),                                      \
        .scan_index = (chan),                                   \
        .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
        .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |  \
                                BIT(IIO_CHAN_INFO_SAMP_FREQ)    \
}

static const struct iio_chan_spec nau7802_chan_array[] = {
        NAU7802_CHANNEL(0),
        NAU7802_CHANNEL(1),
};

static const u16 nau7802_sample_freq_avail[] = {10, 20, 40, 80,
                                                10, 10, 10, 320};

static ssize_t nau7802_show_scales(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct nau7802_state *st = iio_priv(dev_to_iio_dev(dev));
        int i, len = 0;

        for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
                len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09d ",
                                 st->scale_avail[i]);

        buf[len-1] = '\n';

        return len;
}

static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 40 80 320");

static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO, nau7802_show_scales,
                       NULL, 0);

static struct attribute *nau7802_attributes[] = {
        &iio_const_attr_sampling_frequency_available.dev_attr.attr,
        &iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
        NULL
};

static const struct attribute_group nau7802_attribute_group = {
        .attrs = nau7802_attributes,
};

static int nau7802_set_gain(struct nau7802_state *st, int gain)
{
        int ret;

        mutex_lock(&st->lock);
        st->conversion_count = 0;

        ret = i2c_smbus_read_byte_data(st->client, NAU7802_REG_CTRL1);
        if (ret < 0)
                goto nau7802_sysfs_set_gain_out;
        ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL1,
                                        (ret & (~NAU7802_CTRL1_GAINS_BITS)) |
                                        gain);

nau7802_sysfs_set_gain_out:
        mutex_unlock(&st->lock);

        return ret;
}

static int nau7802_read_conversion(struct nau7802_state *st)
{
        int data;

        mutex_lock(&st->data_lock);
        data = i2c_smbus_read_byte_data(st->client, NAU7802_REG_ADC_B2);
        if (data < 0)
                goto nau7802_read_conversion_out;
        st->last_value = data << 16;

        data = i2c_smbus_read_byte_data(st->client, NAU7802_REG_ADC_B1);
        if (data < 0)
                goto nau7802_read_conversion_out;
        st->last_value |= data << 8;

        data = i2c_smbus_read_byte_data(st->client, NAU7802_REG_ADC_B0);
        if (data < 0)
                goto nau7802_read_conversion_out;
        st->last_value |= data;

        st->last_value = sign_extend32(st->last_value, 23);

nau7802_read_conversion_out:
        mutex_unlock(&st->data_lock);

        return data;
}

/*
 * Conversions are synchronised on the rising edge of NAU7802_PUCTRL_CS_BIT
 */
static int nau7802_sync(struct nau7802_state *st)
{
        int ret;

        ret = i2c_smbus_read_byte_data(st->client, NAU7802_REG_PUCTRL);
        if (ret < 0)
                return ret;
        ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_PUCTRL,
                                ret | NAU7802_PUCTRL_CS_BIT);

        return ret;
}

static irqreturn_t nau7802_eoc_trigger(int irq, void *private)
{
        struct iio_dev *indio_dev = private;
        struct nau7802_state *st = iio_priv(indio_dev);
        int status;

        status = i2c_smbus_read_byte_data(st->client, NAU7802_REG_PUCTRL);
        if (status < 0)
                return IRQ_HANDLED;

        if (!(status & NAU7802_PUCTRL_CR_BIT))
                return IRQ_NONE;

        if (nau7802_read_conversion(st) < 0)
                return IRQ_HANDLED;

        /*
         * Because there is actually only one ADC for both channels, we have to
         * wait for enough conversions to happen before getting a significant
         * value when changing channels and the values are far apart.
         */
        if (st->conversion_count < NAU7802_MIN_CONVERSIONS)
                st->conversion_count++;
        if (st->conversion_count >= NAU7802_MIN_CONVERSIONS)
                complete(&st->value_ok);

        return IRQ_HANDLED;
}

static int nau7802_read_irq(struct iio_dev *indio_dev,
                        struct iio_chan_spec const *chan,
                        int *val)
{
        struct nau7802_state *st = iio_priv(indio_dev);
        int ret;

        reinit_completion(&st->value_ok);
        enable_irq(st->client->irq);

        nau7802_sync(st);

        /* read registers to ensure we flush everything */
        ret = nau7802_read_conversion(st);
        if (ret < 0)
                goto read_chan_info_failure;

        /* Wait for a conversion to finish */
        ret = wait_for_completion_interruptible_timeout(&st->value_ok,
                        msecs_to_jiffies(1000));
        if (ret == 0)
                ret = -ETIMEDOUT;

        if (ret < 0)
                goto read_chan_info_failure;

        disable_irq(st->client->irq);

        *val = st->last_value;

        return IIO_VAL_INT;

read_chan_info_failure:
        disable_irq(st->client->irq);

        return ret;
}

static int nau7802_read_poll(struct iio_dev *indio_dev,
                        struct iio_chan_spec const *chan,
                        int *val)
{
        struct nau7802_state *st = iio_priv(indio_dev);
        int ret;

        nau7802_sync(st);

        /* read registers to ensure we flush everything */
        ret = nau7802_read_conversion(st);
        if (ret < 0)
                return ret;

        /*
         * Because there is actually only one ADC for both channels, we have to
         * wait for enough conversions to happen before getting a significant
         * value when changing channels and the values are far appart.
         */
        do {
                ret = i2c_smbus_read_byte_data(st->client, NAU7802_REG_PUCTRL);
                if (ret < 0)
                        return ret;

                while (!(ret & NAU7802_PUCTRL_CR_BIT)) {
                        if (st->sample_rate != NAU7802_SAMP_FREQ_320)
                                msleep(20);
                        else
                                mdelay(4);
                        ret = i2c_smbus_read_byte_data(st->client,
                                                        NAU7802_REG_PUCTRL);
                        if (ret < 0)
                                return ret;
                }

                ret = nau7802_read_conversion(st);
                if (ret < 0)
                        return ret;
                if (st->conversion_count < NAU7802_MIN_CONVERSIONS)
                        st->conversion_count++;
        } while (st->conversion_count < NAU7802_MIN_CONVERSIONS);

        *val = st->last_value;

        return IIO_VAL_INT;
}

static int nau7802_read_raw(struct iio_dev *indio_dev,
                            struct iio_chan_spec const *chan,
                            int *val, int *val2, long mask)
{
        struct nau7802_state *st = iio_priv(indio_dev);
        int ret;

        switch (mask) {
        case IIO_CHAN_INFO_RAW:
                mutex_lock(&st->lock);
                /*
                 * Select the channel to use
                 *   - Channel 1 is value 0 in the CHS register
                 *   - Channel 2 is value 1 in the CHS register
                 */
                ret = i2c_smbus_read_byte_data(st->client, NAU7802_REG_CTRL2);
                if (ret < 0) {
                        mutex_unlock(&st->lock);
                        return ret;
                }

                if (((ret & NAU7802_CTRL2_CHS_BIT) && !chan->channel) ||
                                (!(ret & NAU7802_CTRL2_CHS_BIT) &&
                                 chan->channel)) {
                        st->conversion_count = 0;
                        ret = i2c_smbus_write_byte_data(st->client,
                                        NAU7802_REG_CTRL2,
                                        NAU7802_CTRL2_CHS(chan->channel) |
                                        NAU7802_CTRL2_CRS(st->sample_rate));

                        if (ret < 0) {
                                mutex_unlock(&st->lock);
                                return ret;
                        }
                }

                if (st->client->irq)
                        ret = nau7802_read_irq(indio_dev, chan, val);
                else
                        ret = nau7802_read_poll(indio_dev, chan, val);

                mutex_unlock(&st->lock);
                return ret;

        case IIO_CHAN_INFO_SCALE:
                ret = i2c_smbus_read_byte_data(st->client, NAU7802_REG_CTRL1);
                if (ret < 0)
                        return ret;

                /*
                 * We have 24 bits of signed data, that means 23 bits of data
                 * plus the sign bit
                 */
                *val = st->vref_mv;
                *val2 = 23 + (ret & NAU7802_CTRL1_GAINS_BITS);

                return IIO_VAL_FRACTIONAL_LOG2;

        case IIO_CHAN_INFO_SAMP_FREQ:
                *val =  nau7802_sample_freq_avail[st->sample_rate];
                *val2 = 0;
                return IIO_VAL_INT;

        default:
                break;
        }

        return -EINVAL;
}

static int nau7802_write_raw(struct iio_dev *indio_dev,
                             struct iio_chan_spec const *chan,
                             int val, int val2, long mask)
{
        struct nau7802_state *st = iio_priv(indio_dev);
        int i, ret;

        switch (mask) {
        case IIO_CHAN_INFO_SCALE:
                for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
                        if (val2 == st->scale_avail[i])
                                return nau7802_set_gain(st, i);

                break;

        case IIO_CHAN_INFO_SAMP_FREQ:
                for (i = 0; i < ARRAY_SIZE(nau7802_sample_freq_avail); i++)
                        if (val == nau7802_sample_freq_avail[i]) {
                                mutex_lock(&st->lock);
                                st->sample_rate = i;
                                st->conversion_count = 0;
                                ret = i2c_smbus_write_byte_data(st->client,
                                        NAU7802_REG_CTRL2,
                                        NAU7802_CTRL2_CRS(st->sample_rate));
                                mutex_unlock(&st->lock);
                                return ret;
                        }

                break;

        default:
                break;
        }

        return -EINVAL;
}

static int nau7802_write_raw_get_fmt(struct iio_dev *indio_dev,
                                     struct iio_chan_spec const *chan,
                                     long mask)
{
        return IIO_VAL_INT_PLUS_NANO;
}

static const struct iio_info nau7802_info = {
        .read_raw = &nau7802_read_raw,
        .write_raw = &nau7802_write_raw,
        .write_raw_get_fmt = nau7802_write_raw_get_fmt,
        .attrs = &nau7802_attribute_group,
};

static int nau7802_probe(struct i2c_client *client)
{
        struct iio_dev *indio_dev;
        struct nau7802_state *st;
        int i, ret;
        u8 data;
        u32 tmp = 0;

        indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
        if (indio_dev == NULL)
                return -ENOMEM;

        st = iio_priv(indio_dev);

        indio_dev->name = dev_name(&client->dev);
        indio_dev->modes = INDIO_DIRECT_MODE;
        indio_dev->info = &nau7802_info;

        st->client = client;

        /* Reset the device */
        ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_PUCTRL,
                                  NAU7802_PUCTRL_RR_BIT);
        if (ret < 0)
                return ret;

        /* Enter normal operation mode */
        ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_PUCTRL,
                                  NAU7802_PUCTRL_PUD_BIT);
        if (ret < 0)
                return ret;

        /*
         * After about 200 usecs, the device should be ready and then
         * the Power Up bit will be set to 1. If not, wait for it.
         */
        udelay(210);
        ret = i2c_smbus_read_byte_data(st->client, NAU7802_REG_PUCTRL);
        if (ret < 0)
                return ret;
        if (!(ret & NAU7802_PUCTRL_PUR_BIT))
                return ret;

        device_property_read_u32(&client->dev, "nuvoton,vldo", &tmp);
        st->vref_mv = tmp;

        data = NAU7802_PUCTRL_PUD_BIT | NAU7802_PUCTRL_PUA_BIT |
                NAU7802_PUCTRL_CS_BIT;
        if (tmp >= 2400)
                data |= NAU7802_PUCTRL_AVDDS_BIT;

        ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_PUCTRL, data);
        if (ret < 0)
                return ret;
        ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_ADC_CTRL, 0x30);
        if (ret < 0)
                return ret;

        if (tmp >= 2400) {
                data = NAU7802_CTRL1_VLDO((4500 - tmp) / 300);
                ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL1,
                                                data);
                if (ret < 0)
                        return ret;
        }

        /* Populate available ADC input ranges */
        for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
                st->scale_avail[i] = (((u64)st->vref_mv) * 1000000000ULL)
                                           >> (23 + i);

        init_completion(&st->value_ok);

        /*
         * The ADC fires continuously and we can't do anything about
         * it. So we need to have the IRQ disabled by default, and we
         * will enable them back when we will need them..
         */
        if (client->irq) {
                ret = devm_request_threaded_irq(&client->dev, client->irq,
                                                NULL,
                                                nau7802_eoc_trigger,
                                                IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
                                                IRQF_NO_AUTOEN,
                                                client->dev.driver->name,
                                                indio_dev);
                if (ret) {
                        /*
                         * What may happen here is that our IRQ controller is
                         * not able to get level interrupt but this is required
                         * by this ADC as when going over 40 sample per second,
                         * the interrupt line may stay high between conversions.
                         * So, we continue no matter what but we switch to
                         * polling mode.
                         */
                        dev_info(&client->dev,
                                "Failed to allocate IRQ, using polling mode\n");
                        client->irq = 0;
                }
        }

        if (!client->irq) {
                /*
                 * We are polling, use the fastest sample rate by
                 * default
                 */
                st->sample_rate = NAU7802_SAMP_FREQ_320;
                ret = i2c_smbus_write_byte_data(st->client, NAU7802_REG_CTRL2,
                                          NAU7802_CTRL2_CRS(st->sample_rate));
                if (ret)
                        return ret;
        }

        /* Setup the ADC channels available on the board */
        indio_dev->num_channels = ARRAY_SIZE(nau7802_chan_array);
        indio_dev->channels = nau7802_chan_array;

        mutex_init(&st->lock);
        mutex_init(&st->data_lock);

        return devm_iio_device_register(&client->dev, indio_dev);
}

static const struct i2c_device_id nau7802_i2c_id[] = {
        { "nau7802" },
        { }
};
MODULE_DEVICE_TABLE(i2c, nau7802_i2c_id);

static const struct of_device_id nau7802_dt_ids[] = {
        { .compatible = "nuvoton,nau7802" },
        { }
};
MODULE_DEVICE_TABLE(of, nau7802_dt_ids);

static struct i2c_driver nau7802_driver = {
        .probe = nau7802_probe,
        .id_table = nau7802_i2c_id,
        .driver = {
                   .name = "nau7802",
                   .of_match_table = nau7802_dt_ids,
        },
};

module_i2c_driver(nau7802_driver);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Nuvoton NAU7802 ADC Driver");
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");