drivers/iio/light/al3320a.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * AL3320A - Dyna Image Ambient Light Sensor
   4  *
   5  * Copyright (c) 2014, Intel Corporation.
   6  *
   7  * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
   8  *
   9  * TODO: interrupt support, thresholds
  10  * When the driver will get support for interrupt handling, then interrupt
  11  * will need to be disabled before turning sensor OFF in order to avoid
  12  * potential races with the interrupt handling.
  13  */
  14
  15 #include <linux/bitfield.h>
  16 #include <linux/i2c.h>
  17 #include <linux/module.h>
  18 #include <linux/mod_devicetable.h>
  19
  20 #include <linux/iio/iio.h>
  21 #include <linux/iio/sysfs.h>
  22
  23 #define AL3320A_DRV_NAME "al3320a"
  24
  25 #define AL3320A_REG_CONFIG              0x00
  26 #define AL3320A_REG_STATUS              0x01
  27 #define AL3320A_REG_INT                 0x02
  28 #define AL3320A_REG_WAIT                0x06
  29 #define AL3320A_REG_CONFIG_RANGE        0x07
  30 #define AL3320A_REG_PERSIST             0x08
  31 #define AL3320A_REG_MEAN_TIME           0x09
  32 #define AL3320A_REG_ADUMMY              0x0A
  33 #define AL3320A_REG_DATA_LOW            0x22
  34
  35 #define AL3320A_REG_LOW_THRESH_LOW      0x30
  36 #define AL3320A_REG_LOW_THRESH_HIGH     0x31
  37 #define AL3320A_REG_HIGH_THRESH_LOW     0x32
  38 #define AL3320A_REG_HIGH_THRESH_HIGH    0x33
  39
  40 #define AL3320A_CONFIG_DISABLE          0x00
  41 #define AL3320A_CONFIG_ENABLE           0x01
  42
  43 #define AL3320A_GAIN_MASK               GENMASK(2, 1)
  44
  45 /* chip params default values */
  46 #define AL3320A_DEFAULT_MEAN_TIME       4
  47 #define AL3320A_DEFAULT_WAIT_TIME       0 /* no waiting */
  48
  49 #define AL3320A_SCALE_AVAILABLE "0.512 0.128 0.032 0.01"
  50
  51 enum al3320a_range {
  52         AL3320A_RANGE_1, /* 33.28 Klx */
  53         AL3320A_RANGE_2, /* 8.32 Klx  */
  54         AL3320A_RANGE_3, /* 2.08 Klx  */
  55         AL3320A_RANGE_4  /* 0.65 Klx  */
  56 };
  57
  58 static const int al3320a_scales[][2] = {
  59         {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
  60 };
  61
  62 struct al3320a_data {
  63         struct i2c_client *client;
  64 };
  65
  66 static const struct iio_chan_spec al3320a_channels[] = {
  67         {
  68                 .type   = IIO_LIGHT,
  69                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
  70                                       BIT(IIO_CHAN_INFO_SCALE),
  71         }
  72 };
  73
  74 static IIO_CONST_ATTR(in_illuminance_scale_available, AL3320A_SCALE_AVAILABLE);
  75
  76 static struct attribute *al3320a_attributes[] = {
  77         &iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
  78         NULL,
  79 };
  80
  81 static const struct attribute_group al3320a_attribute_group = {
  82         .attrs = al3320a_attributes,
  83 };
  84
  85 static int al3320a_set_pwr(struct i2c_client *client, bool pwr)
  86 {
  87         u8 val = pwr ? AL3320A_CONFIG_ENABLE : AL3320A_CONFIG_DISABLE;
  88         return i2c_smbus_write_byte_data(client, AL3320A_REG_CONFIG, val);
  89 }
  90
  91 static void al3320a_set_pwr_off(void *_data)
  92 {
  93         struct al3320a_data *data = _data;
  94
  95         al3320a_set_pwr(data->client, false);
  96 }
  97
  98 static int al3320a_init(struct al3320a_data *data)
  99 {
 100         int ret;
 101
 102         ret = al3320a_set_pwr(data->client, true);
 103
 104         if (ret < 0)
 105                 return ret;
 106
 107         ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
 108                                         FIELD_PREP(AL3320A_GAIN_MASK,
 109                                                    AL3320A_RANGE_3));
 110         if (ret < 0)
 111                 return ret;
 112
 113         ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME,
 114                                         AL3320A_DEFAULT_MEAN_TIME);
 115         if (ret < 0)
 116                 return ret;
 117
 118         ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT,
 119                                         AL3320A_DEFAULT_WAIT_TIME);
 120         if (ret < 0)
 121                 return ret;
 122
 123         return 0;
 124 }
 125
 126 static int al3320a_read_raw(struct iio_dev *indio_dev,
 127                             struct iio_chan_spec const *chan, int *val,
 128                             int *val2, long mask)
 129 {
 130         struct al3320a_data *data = iio_priv(indio_dev);
 131         int ret;
 132
 133         switch (mask) {
 134         case IIO_CHAN_INFO_RAW:
 135                 /*
 136                  * ALS ADC value is stored in two adjacent registers:
 137                  * - low byte of output is stored at AL3320A_REG_DATA_LOW
 138                  * - high byte of output is stored at AL3320A_REG_DATA_LOW + 1
 139                  */
 140                 ret = i2c_smbus_read_word_data(data->client,
 141                                                AL3320A_REG_DATA_LOW);
 142                 if (ret < 0)
 143                         return ret;
 144                 *val = ret;
 145                 return IIO_VAL_INT;
 146         case IIO_CHAN_INFO_SCALE:
 147                 ret = i2c_smbus_read_byte_data(data->client,
 148                                                AL3320A_REG_CONFIG_RANGE);
 149                 if (ret < 0)
 150                         return ret;
 151
 152                 ret = FIELD_GET(AL3320A_GAIN_MASK, ret);
 153                 *val = al3320a_scales[ret][0];
 154                 *val2 = al3320a_scales[ret][1];
 155
 156                 return IIO_VAL_INT_PLUS_MICRO;
 157         }
 158         return -EINVAL;
 159 }
 160
 161 static int al3320a_write_raw(struct iio_dev *indio_dev,
 162                              struct iio_chan_spec const *chan, int val,
 163                              int val2, long mask)
 164 {
 165         struct al3320a_data *data = iio_priv(indio_dev);
 166         int i;
 167
 168         switch (mask) {
 169         case IIO_CHAN_INFO_SCALE:
 170                 for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
 171                         if (val != al3320a_scales[i][0] ||
 172                             val2 != al3320a_scales[i][1])
 173                                 continue;
 174
 175                         return i2c_smbus_write_byte_data(data->client,
 176                                         AL3320A_REG_CONFIG_RANGE,
 177                                         FIELD_PREP(AL3320A_GAIN_MASK, i));
 178                 }
 179                 break;
 180         }
 181         return -EINVAL;
 182 }
 183
 184 static const struct iio_info al3320a_info = {
 185         .read_raw       = al3320a_read_raw,
 186         .write_raw      = al3320a_write_raw,
 187         .attrs          = &al3320a_attribute_group,
 188 };
 189
 190 static int al3320a_probe(struct i2c_client *client)
 191 {
 192         struct al3320a_data *data;
 193         struct iio_dev *indio_dev;
 194         int ret;
 195
 196         indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 197         if (!indio_dev)
 198                 return -ENOMEM;
 199
 200         data = iio_priv(indio_dev);
 201         i2c_set_clientdata(client, indio_dev);
 202         data->client = client;
 203
 204         indio_dev->info = &al3320a_info;
 205         indio_dev->name = AL3320A_DRV_NAME;
 206         indio_dev->channels = al3320a_channels;
 207         indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
 208         indio_dev->modes = INDIO_DIRECT_MODE;
 209
 210         ret = al3320a_init(data);
 211         if (ret < 0) {
 212                 dev_err(&client->dev, "al3320a chip init failed\n");
 213                 return ret;
 214         }
 215
 216         ret = devm_add_action_or_reset(&client->dev,
 217                                         al3320a_set_pwr_off,
 218                                         data);
 219         if (ret < 0)
 220                 return ret;
 221
 222         return devm_iio_device_register(&client->dev, indio_dev);
 223 }
 224
 225 static int al3320a_suspend(struct device *dev)
 226 {
 227         return al3320a_set_pwr(to_i2c_client(dev), false);
 228 }
 229
 230 static int al3320a_resume(struct device *dev)
 231 {
 232         return al3320a_set_pwr(to_i2c_client(dev), true);
 233 }
 234
 235 static DEFINE_SIMPLE_DEV_PM_OPS(al3320a_pm_ops, al3320a_suspend,
 236                                 al3320a_resume);
 237
 238 static const struct i2c_device_id al3320a_id[] = {
 239         { "al3320a" },
 240         {}
 241 };
 242 MODULE_DEVICE_TABLE(i2c, al3320a_id);
 243
 244 static const struct of_device_id al3320a_of_match[] = {
 245         { .compatible = "dynaimage,al3320a", },
 246         {},
 247 };
 248 MODULE_DEVICE_TABLE(of, al3320a_of_match);
 249
 250 static const struct acpi_device_id al3320a_acpi_match[] = {
 251         {"CALS0001"},
 252         { },
 253 };
 254 MODULE_DEVICE_TABLE(acpi, al3320a_acpi_match);
 255
 256 static struct i2c_driver al3320a_driver = {
 257         .driver = {
 258                 .name = AL3320A_DRV_NAME,
 259                 .of_match_table = al3320a_of_match,
 260                 .pm = pm_sleep_ptr(&al3320a_pm_ops),
 261                 .acpi_match_table = al3320a_acpi_match,
 262         },
 263         .probe          = al3320a_probe,
 264         .id_table       = al3320a_id,
 265 };
 266
 267 module_i2c_driver(al3320a_driver);
 268
 269 MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
 270 MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
 271 MODULE_LICENSE("GPL v2");