1 // SPDX-License-Identifier: GPL-2.0-only
5 * Copyright (C) 2013 Texas Instruments
7 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
10 #include <linux/cleanup.h>
11 #include <linux/delay.h>
12 #include <linux/firmware.h>
13 #include <linux/i2c.h>
14 #include <linux/leds.h>
15 #include <linux/module.h>
16 #include <linux/mutex.h>
18 #include <linux/platform_data/leds-lp55xx.h>
19 #include <linux/slab.h>
21 #include "leds-lp55xx-common.h"
23 #define LP5562_MAX_LEDS 4
25 /* ENABLE Register 00h */
26 #define LP5562_REG_ENABLE 0x00
27 #define LP5562_EXEC_ENG1_M 0x30
28 #define LP5562_EXEC_ENG2_M 0x0C
29 #define LP5562_EXEC_ENG3_M 0x03
30 #define LP5562_EXEC_M 0x3F
31 #define LP5562_MASTER_ENABLE 0x40 /* Chip master enable */
32 #define LP5562_LOGARITHMIC_PWM 0x80 /* Logarithmic PWM adjustment */
33 #define LP5562_EXEC_RUN 0x2A
34 #define LP5562_ENABLE_DEFAULT \
35 (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
36 #define LP5562_ENABLE_RUN_PROGRAM \
37 (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
39 /* OPMODE Register 01h */
40 #define LP5562_REG_OP_MODE 0x01
42 /* BRIGHTNESS Registers */
43 #define LP5562_REG_R_PWM 0x04
44 #define LP5562_REG_G_PWM 0x03
45 #define LP5562_REG_B_PWM 0x02
46 #define LP5562_REG_W_PWM 0x0E
48 /* CURRENT Registers */
49 #define LP5562_REG_R_CURRENT 0x07
50 #define LP5562_REG_G_CURRENT 0x06
51 #define LP5562_REG_B_CURRENT 0x05
52 #define LP5562_REG_W_CURRENT 0x0F
54 /* CONFIG Register 08h */
55 #define LP5562_REG_CONFIG 0x08
56 #define LP5562_PWM_HF 0x40
57 #define LP5562_PWRSAVE_EN 0x20
58 #define LP5562_CLK_INT 0x01 /* Internal clock */
59 #define LP5562_DEFAULT_CFG (LP5562_PWM_HF | LP5562_PWRSAVE_EN)
61 /* RESET Register 0Dh */
62 #define LP5562_REG_RESET 0x0D
63 #define LP5562_RESET 0xFF
65 /* PROGRAM ENGINE Registers */
66 #define LP5562_REG_PROG_MEM_ENG1 0x10
67 #define LP5562_REG_PROG_MEM_ENG2 0x30
68 #define LP5562_REG_PROG_MEM_ENG3 0x50
70 /* LEDMAP Register 70h */
71 #define LP5562_REG_ENG_SEL 0x70
72 #define LP5562_ENG_SEL_PWM 0
73 #define LP5562_ENG_FOR_RGB_M 0x3F
74 #define LP5562_ENG_SEL_RGB 0x1B /* R:ENG1, G:ENG2, B:ENG3 */
75 #define LP5562_ENG_FOR_W_M 0xC0
76 #define LP5562_ENG1_FOR_W 0x40 /* W:ENG1 */
77 #define LP5562_ENG2_FOR_W 0x80 /* W:ENG2 */
78 #define LP5562_ENG3_FOR_W 0xC0 /* W:ENG3 */
80 /* Program Commands */
81 #define LP5562_CMD_DISABLE 0x00
82 #define LP5562_CMD_LOAD 0x15
83 #define LP5562_CMD_RUN 0x2A
84 #define LP5562_CMD_DIRECT 0x3F
85 #define LP5562_PATTERN_OFF 0
87 static inline void lp5562_wait_opmode_done(void)
89 /* operation mode change needs to be longer than 153 us */
90 usleep_range(200, 300);
93 static inline void lp5562_wait_enable_done(void)
95 /* it takes more 488 us to update ENABLE register */
96 usleep_range(500, 600);
99 static void lp5562_set_led_current(struct lp55xx_led
*led
, u8 led_current
)
101 static const u8 addr
[] = {
102 LP5562_REG_R_CURRENT
,
103 LP5562_REG_G_CURRENT
,
104 LP5562_REG_B_CURRENT
,
105 LP5562_REG_W_CURRENT
,
108 led
->led_current
= led_current
;
109 lp55xx_write(led
->chip
, addr
[led
->chan_nr
], led_current
);
112 static void lp5562_run_engine(struct lp55xx_chip
*chip
, bool start
)
118 lp55xx_write(chip
, LP5562_REG_ENABLE
, LP5562_ENABLE_DEFAULT
);
119 lp5562_wait_enable_done();
120 lp55xx_stop_all_engine(chip
);
121 lp55xx_write(chip
, LP5562_REG_ENG_SEL
, LP5562_ENG_SEL_PWM
);
122 lp55xx_write(chip
, LP5562_REG_OP_MODE
, LP5562_CMD_DIRECT
);
123 lp5562_wait_opmode_done();
127 ret
= lp55xx_run_engine_common(chip
);
129 lp5562_wait_enable_done();
132 static int lp5562_post_init_device(struct lp55xx_chip
*chip
)
135 u8 cfg
= LP5562_DEFAULT_CFG
;
137 /* Set all PWMs to direct control mode */
138 ret
= lp55xx_write(chip
, LP5562_REG_OP_MODE
, LP5562_CMD_DIRECT
);
142 lp5562_wait_opmode_done();
144 /* Update configuration for the clock setting */
145 if (!lp55xx_is_extclk_used(chip
))
146 cfg
|= LP5562_CLK_INT
;
148 ret
= lp55xx_write(chip
, LP5562_REG_CONFIG
, cfg
);
152 /* Initialize all channels PWM to zero -> leds off */
153 lp55xx_write(chip
, LP5562_REG_R_PWM
, 0);
154 lp55xx_write(chip
, LP5562_REG_G_PWM
, 0);
155 lp55xx_write(chip
, LP5562_REG_B_PWM
, 0);
156 lp55xx_write(chip
, LP5562_REG_W_PWM
, 0);
158 /* Set LED map as register PWM by default */
159 lp55xx_write(chip
, LP5562_REG_ENG_SEL
, LP5562_ENG_SEL_PWM
);
164 static int lp5562_multicolor_brightness(struct lp55xx_led
*led
)
166 struct lp55xx_chip
*chip
= led
->chip
;
167 static const u8 addr
[] = {
176 guard(mutex
)(&chip
->lock
);
177 for (i
= 0; i
< led
->mc_cdev
.num_colors
; i
++) {
178 ret
= lp55xx_write(chip
,
179 addr
[led
->mc_cdev
.subled_info
[i
].channel
],
180 led
->mc_cdev
.subled_info
[i
].brightness
);
188 static int lp5562_led_brightness(struct lp55xx_led
*led
)
190 struct lp55xx_chip
*chip
= led
->chip
;
191 static const u8 addr
[] = {
199 guard(mutex
)(&chip
->lock
);
201 ret
= lp55xx_write(chip
, addr
[led
->chan_nr
], led
->brightness
);
206 static void lp5562_write_program_memory(struct lp55xx_chip
*chip
,
207 u8 base
, const u8
*rgb
, int size
)
211 if (!rgb
|| size
<= 0)
214 for (i
= 0; i
< size
; i
++)
215 lp55xx_write(chip
, base
+ i
, *(rgb
+ i
));
217 lp55xx_write(chip
, base
+ i
, 0);
218 lp55xx_write(chip
, base
+ i
+ 1, 0);
221 /* check the size of program count */
222 static inline bool _is_pc_overflow(struct lp55xx_predef_pattern
*ptn
)
224 return ptn
->size_r
>= LP55xx_BYTES_PER_PAGE
||
225 ptn
->size_g
>= LP55xx_BYTES_PER_PAGE
||
226 ptn
->size_b
>= LP55xx_BYTES_PER_PAGE
;
229 static int lp5562_run_predef_led_pattern(struct lp55xx_chip
*chip
, int mode
)
231 struct lp55xx_predef_pattern
*ptn
;
234 if (mode
== LP5562_PATTERN_OFF
) {
235 lp5562_run_engine(chip
, false);
239 ptn
= chip
->pdata
->patterns
+ (mode
- 1);
240 if (!ptn
|| _is_pc_overflow(ptn
)) {
241 dev_err(&chip
->cl
->dev
, "invalid pattern data\n");
245 lp55xx_stop_all_engine(chip
);
247 /* Set LED map as RGB */
248 lp55xx_write(chip
, LP5562_REG_ENG_SEL
, LP5562_ENG_SEL_RGB
);
251 for (i
= LP55XX_ENGINE_1
; i
<= LP55XX_ENGINE_3
; i
++) {
252 chip
->engine_idx
= i
;
253 lp55xx_load_engine(chip
);
256 /* Clear program registers */
257 lp55xx_write(chip
, LP5562_REG_PROG_MEM_ENG1
, 0);
258 lp55xx_write(chip
, LP5562_REG_PROG_MEM_ENG1
+ 1, 0);
259 lp55xx_write(chip
, LP5562_REG_PROG_MEM_ENG2
, 0);
260 lp55xx_write(chip
, LP5562_REG_PROG_MEM_ENG2
+ 1, 0);
261 lp55xx_write(chip
, LP5562_REG_PROG_MEM_ENG3
, 0);
262 lp55xx_write(chip
, LP5562_REG_PROG_MEM_ENG3
+ 1, 0);
264 /* Program engines */
265 lp5562_write_program_memory(chip
, LP5562_REG_PROG_MEM_ENG1
,
266 ptn
->r
, ptn
->size_r
);
267 lp5562_write_program_memory(chip
, LP5562_REG_PROG_MEM_ENG2
,
268 ptn
->g
, ptn
->size_g
);
269 lp5562_write_program_memory(chip
, LP5562_REG_PROG_MEM_ENG3
,
270 ptn
->b
, ptn
->size_b
);
273 lp5562_run_engine(chip
, true);
278 static ssize_t
lp5562_store_pattern(struct device
*dev
,
279 struct device_attribute
*attr
,
280 const char *buf
, size_t len
)
282 struct lp55xx_led
*led
= i2c_get_clientdata(to_i2c_client(dev
));
283 struct lp55xx_chip
*chip
= led
->chip
;
284 struct lp55xx_predef_pattern
*ptn
= chip
->pdata
->patterns
;
285 int num_patterns
= chip
->pdata
->num_patterns
;
289 ret
= kstrtoul(buf
, 0, &mode
);
293 if (mode
> num_patterns
|| !ptn
)
296 guard(mutex
)(&chip
->lock
);
298 ret
= lp5562_run_predef_led_pattern(chip
, mode
);
306 static ssize_t
lp5562_store_engine_mux(struct device
*dev
,
307 struct device_attribute
*attr
,
308 const char *buf
, size_t len
)
310 struct lp55xx_led
*led
= i2c_get_clientdata(to_i2c_client(dev
));
311 struct lp55xx_chip
*chip
= led
->chip
;
316 * R ... Engine 1 (fixed)
317 * G ... Engine 2 (fixed)
318 * B ... Engine 3 (fixed)
319 * W ... Engine 1 or 2 or 3
322 if (sysfs_streq(buf
, "RGB")) {
323 mask
= LP5562_ENG_FOR_RGB_M
;
324 val
= LP5562_ENG_SEL_RGB
;
325 } else if (sysfs_streq(buf
, "W")) {
326 enum lp55xx_engine_index idx
= chip
->engine_idx
;
328 mask
= LP5562_ENG_FOR_W_M
;
330 case LP55XX_ENGINE_1
:
331 val
= LP5562_ENG1_FOR_W
;
333 case LP55XX_ENGINE_2
:
334 val
= LP5562_ENG2_FOR_W
;
336 case LP55XX_ENGINE_3
:
337 val
= LP5562_ENG3_FOR_W
;
344 dev_err(dev
, "choose RGB or W\n");
348 guard(mutex
)(&chip
->lock
);
350 lp55xx_update_bits(chip
, LP5562_REG_ENG_SEL
, mask
, val
);
355 static LP55XX_DEV_ATTR_WO(led_pattern
, lp5562_store_pattern
);
356 static LP55XX_DEV_ATTR_WO(engine_mux
, lp5562_store_engine_mux
);
358 static struct attribute
*lp5562_attributes
[] = {
359 &dev_attr_led_pattern
.attr
,
360 &dev_attr_engine_mux
.attr
,
364 static const struct attribute_group lp5562_group
= {
365 .attrs
= lp5562_attributes
,
368 /* Chip specific configurations */
369 static struct lp55xx_device_config lp5562_cfg
= {
370 .max_channel
= LP5562_MAX_LEDS
,
372 .addr
= LP5562_REG_OP_MODE
,
375 .addr
= LP5562_REG_ENABLE
,
378 .addr
= LP5562_REG_RESET
,
382 .addr
= LP5562_REG_ENABLE
,
383 .val
= LP5562_ENABLE_DEFAULT
,
386 .addr
= LP5562_REG_PROG_MEM_ENG1
,
388 .post_init_device
= lp5562_post_init_device
,
389 .set_led_current
= lp5562_set_led_current
,
390 .brightness_fn
= lp5562_led_brightness
,
391 .multicolor_brightness_fn
= lp5562_multicolor_brightness
,
392 .run_engine
= lp5562_run_engine
,
393 .firmware_cb
= lp55xx_firmware_loaded_cb
,
394 .dev_attr_group
= &lp5562_group
,
397 static const struct i2c_device_id lp5562_id
[] = {
398 { "lp5562", .driver_data
= (kernel_ulong_t
)&lp5562_cfg
, },
401 MODULE_DEVICE_TABLE(i2c
, lp5562_id
);
403 static const struct of_device_id of_lp5562_leds_match
[] = {
404 { .compatible
= "ti,lp5562", .data
= &lp5562_cfg
, },
408 MODULE_DEVICE_TABLE(of
, of_lp5562_leds_match
);
410 static struct i2c_driver lp5562_driver
= {
413 .of_match_table
= of_lp5562_leds_match
,
415 .probe
= lp55xx_probe
,
416 .remove
= lp55xx_remove
,
417 .id_table
= lp5562_id
,
420 module_i2c_driver(lp5562_driver
);
422 MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
423 MODULE_AUTHOR("Milo Kim");
424 MODULE_LICENSE("GPL");