2 ivtv driver internal defines and structures
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
27 /* Internal header for ivtv project:
28 * Driver for the cx23415/6 chip.
29 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
33 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
34 * and Takeru KOMORIYA<komoriya@paken.org>
36 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
37 * using information provided by Jiun-Kuei Jung @ AVerMedia.
40 #include <linux/module.h>
41 #include <linux/init.h>
42 #include <linux/delay.h>
43 #include <linux/sched/signal.h>
45 #include <linux/pci.h>
46 #include <linux/interrupt.h>
47 #include <linux/spinlock.h>
48 #include <linux/i2c.h>
49 #include <linux/i2c-algo-bit.h>
50 #include <linux/list.h>
51 #include <linux/unistd.h>
52 #include <linux/pagemap.h>
53 #include <linux/scatterlist.h>
54 #include <linux/kthread.h>
55 #include <linux/mutex.h>
56 #include <linux/slab.h>
57 #include <linux/uaccess.h>
58 #include <asm/byteorder.h>
60 #include <media/v4l2-common.h>
61 #include <media/v4l2-ioctl.h>
62 #include <media/v4l2-ctrls.h>
63 #include <media/v4l2-device.h>
64 #include <media/v4l2-fh.h>
65 #include <media/tuner.h>
66 #include <media/drv-intf/cx2341x.h>
67 #include <media/i2c/ir-kbd-i2c.h>
69 #include <linux/ivtv.h>
72 #define IVTV_ENCODER_OFFSET 0x00000000
73 #define IVTV_ENCODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */
74 #define IVTV_DECODER_OFFSET 0x01000000
75 #define IVTV_DECODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */
76 #define IVTV_REG_OFFSET 0x02000000
77 #define IVTV_REG_SIZE 0x00010000
79 /* Maximum ivtv driver instances. Some people have a huge number of
80 capture cards, so set this to a high value. */
81 #define IVTV_MAX_CARDS 32
83 #define IVTV_ENC_STREAM_TYPE_MPG 0
84 #define IVTV_ENC_STREAM_TYPE_YUV 1
85 #define IVTV_ENC_STREAM_TYPE_VBI 2
86 #define IVTV_ENC_STREAM_TYPE_PCM 3
87 #define IVTV_ENC_STREAM_TYPE_RAD 4
88 #define IVTV_DEC_STREAM_TYPE_MPG 5
89 #define IVTV_DEC_STREAM_TYPE_VBI 6
90 #define IVTV_DEC_STREAM_TYPE_VOUT 7
91 #define IVTV_DEC_STREAM_TYPE_YUV 8
92 #define IVTV_MAX_STREAMS 9
94 #define IVTV_DMA_SG_OSD_ENT (2883584/PAGE_SIZE) /* sg entities */
97 #define IVTV_REG_DMAXFER (0x0000)
98 #define IVTV_REG_DMASTATUS (0x0004)
99 #define IVTV_REG_DECDMAADDR (0x0008)
100 #define IVTV_REG_ENCDMAADDR (0x000c)
101 #define IVTV_REG_DMACONTROL (0x0010)
102 #define IVTV_REG_IRQSTATUS (0x0040)
103 #define IVTV_REG_IRQMASK (0x0048)
105 /* Setup Registers */
106 #define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8)
107 #define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC)
108 #define IVTV_REG_DEC_SDRAM_REFRESH (0x08F8)
109 #define IVTV_REG_DEC_SDRAM_PRECHARGE (0x08FC)
110 #define IVTV_REG_VDM (0x2800)
111 #define IVTV_REG_AO (0x2D00)
112 #define IVTV_REG_BYTEFLUSH (0x2D24)
113 #define IVTV_REG_SPU (0x9050)
114 #define IVTV_REG_HW_BLOCKS (0x9054)
115 #define IVTV_REG_VPU (0x9058)
116 #define IVTV_REG_APU (0xA064)
118 /* Other registers */
119 #define IVTV_REG_DEC_LINE_FIELD (0x28C0)
122 extern int ivtv_debug
;
123 #ifdef CONFIG_VIDEO_ADV_DEBUG
124 extern int ivtv_fw_debug
;
127 #define IVTV_DBGFLG_WARN (1 << 0)
128 #define IVTV_DBGFLG_INFO (1 << 1)
129 #define IVTV_DBGFLG_MB (1 << 2)
130 #define IVTV_DBGFLG_IOCTL (1 << 3)
131 #define IVTV_DBGFLG_FILE (1 << 4)
132 #define IVTV_DBGFLG_DMA (1 << 5)
133 #define IVTV_DBGFLG_IRQ (1 << 6)
134 #define IVTV_DBGFLG_DEC (1 << 7)
135 #define IVTV_DBGFLG_YUV (1 << 8)
136 #define IVTV_DBGFLG_I2C (1 << 9)
137 /* Flag to turn on high volume debugging */
138 #define IVTV_DBGFLG_HIGHVOL (1 << 10)
140 #define IVTV_DEBUG(x, type, fmt, args...) \
142 if ((x) & ivtv_debug) \
143 v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args); \
145 #define IVTV_DEBUG_WARN(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_WARN, "warn", fmt , ## args)
146 #define IVTV_DEBUG_INFO(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_INFO, "info", fmt , ## args)
147 #define IVTV_DEBUG_MB(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_MB, "mb", fmt , ## args)
148 #define IVTV_DEBUG_DMA(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
149 #define IVTV_DEBUG_IOCTL(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
150 #define IVTV_DEBUG_FILE(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_FILE, "file", fmt , ## args)
151 #define IVTV_DEBUG_I2C(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
152 #define IVTV_DEBUG_IRQ(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
153 #define IVTV_DEBUG_DEC(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
154 #define IVTV_DEBUG_YUV(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
156 #define IVTV_DEBUG_HIGH_VOL(x, type, fmt, args...) \
158 if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL)) \
159 v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args); \
161 #define IVTV_DEBUG_HI_WARN(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN, "warn", fmt , ## args)
162 #define IVTV_DEBUG_HI_INFO(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO, "info", fmt , ## args)
163 #define IVTV_DEBUG_HI_MB(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_MB, "mb", fmt , ## args)
164 #define IVTV_DEBUG_HI_DMA(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DMA, "dma", fmt , ## args)
165 #define IVTV_DEBUG_HI_IOCTL(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
166 #define IVTV_DEBUG_HI_FILE(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_FILE, "file", fmt , ## args)
167 #define IVTV_DEBUG_HI_I2C(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_I2C, "i2c", fmt , ## args)
168 #define IVTV_DEBUG_HI_IRQ(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IRQ, "irq", fmt , ## args)
169 #define IVTV_DEBUG_HI_DEC(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DEC, "dec", fmt , ## args)
170 #define IVTV_DEBUG_HI_YUV(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
172 /* Standard kernel messages */
173 #define IVTV_ERR(fmt, args...) v4l2_err(&itv->v4l2_dev, fmt , ## args)
174 #define IVTV_WARN(fmt, args...) v4l2_warn(&itv->v4l2_dev, fmt , ## args)
175 #define IVTV_INFO(fmt, args...) v4l2_info(&itv->v4l2_dev, fmt , ## args)
177 /* output modes (cx23415 only) */
181 #define OUT_UDMA_YUV 3
182 #define OUT_PASSTHROUGH 4
184 #define IVTV_MAX_PGM_INDEX (400)
186 /* Default I2C SCL period in microseconds */
187 #define IVTV_DEFAULT_I2C_CLOCK_PERIOD 20
189 struct ivtv_options
{
190 int kilobytes
[IVTV_MAX_STREAMS
]; /* size in kilobytes of each stream */
191 int cardtype
; /* force card type on load */
192 int tuner
; /* set tuner on load */
193 int radio
; /* enable/disable radio */
194 int newi2c
; /* new I2C algorithm */
195 int i2c_clock_period
; /* period of SCL for I2C bus */
198 /* ivtv-specific mailbox template */
199 struct ivtv_mailbox
{
204 u32 data
[CX2341X_MBOX_MAX_DATA
];
207 struct ivtv_api_cache
{
208 unsigned long last_jiffies
; /* when last command was issued */
209 u32 data
[CX2341X_MBOX_MAX_DATA
]; /* last sent api data */
212 struct ivtv_mailbox_data
{
213 volatile struct ivtv_mailbox __iomem
*mbox
;
214 /* Bits 0-2 are for the encoder mailboxes, 0-1 are for the decoder mailboxes.
215 If the bit is set, then the corresponding mailbox is in use by the driver. */
220 /* per-buffer bit flags */
221 #define IVTV_F_B_NEED_BUF_SWAP (1 << 0) /* this buffer should be byte swapped */
223 /* per-stream, s_flags */
224 #define IVTV_F_S_DMA_PENDING 0 /* this stream has pending DMA */
225 #define IVTV_F_S_DMA_HAS_VBI 1 /* the current DMA request also requests VBI data */
226 #define IVTV_F_S_NEEDS_DATA 2 /* this decoding stream needs more data */
228 #define IVTV_F_S_CLAIMED 3 /* this stream is claimed */
229 #define IVTV_F_S_STREAMING 4 /* the fw is decoding/encoding this stream */
230 #define IVTV_F_S_INTERNAL_USE 5 /* this stream is used internally (sliced VBI processing) */
231 #define IVTV_F_S_PASSTHROUGH 6 /* this stream is in passthrough mode */
232 #define IVTV_F_S_STREAMOFF 7 /* signal end of stream EOS */
233 #define IVTV_F_S_APPL_IO 8 /* this stream is used read/written by an application */
235 #define IVTV_F_S_PIO_PENDING 9 /* this stream has pending PIO */
236 #define IVTV_F_S_PIO_HAS_VBI 1 /* the current PIO request also requests VBI data */
238 /* per-ivtv, i_flags */
239 #define IVTV_F_I_DMA 0 /* DMA in progress */
240 #define IVTV_F_I_UDMA 1 /* UDMA in progress */
241 #define IVTV_F_I_UDMA_PENDING 2 /* UDMA pending */
242 #define IVTV_F_I_SPEED_CHANGE 3 /* a speed change is in progress */
243 #define IVTV_F_I_EOS 4 /* end of encoder stream reached */
244 #define IVTV_F_I_RADIO_USER 5 /* the radio tuner is selected */
245 #define IVTV_F_I_DIG_RST 6 /* reset digitizer */
246 #define IVTV_F_I_DEC_YUV 7 /* YUV instead of MPG is being decoded */
247 #define IVTV_F_I_UPDATE_CC 9 /* CC should be updated */
248 #define IVTV_F_I_UPDATE_WSS 10 /* WSS should be updated */
249 #define IVTV_F_I_UPDATE_VPS 11 /* VPS should be updated */
250 #define IVTV_F_I_DECODING_YUV 12 /* this stream is YUV frame decoding */
251 #define IVTV_F_I_ENC_PAUSED 13 /* the encoder is paused */
252 #define IVTV_F_I_VALID_DEC_TIMINGS 14 /* last_dec_timing is valid */
253 #define IVTV_F_I_HAVE_WORK 15 /* used in the interrupt handler: there is work to be done */
254 #define IVTV_F_I_WORK_HANDLER_VBI 16 /* there is work to be done for VBI */
255 #define IVTV_F_I_WORK_HANDLER_YUV 17 /* there is work to be done for YUV */
256 #define IVTV_F_I_WORK_HANDLER_PIO 18 /* there is work to be done for PIO */
257 #define IVTV_F_I_PIO 19 /* PIO in progress */
258 #define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */
259 #define IVTV_F_I_INITED 21 /* set after first open */
260 #define IVTV_F_I_FAILED 22 /* set if first open failed */
261 #define IVTV_F_I_WORK_HANDLER_PCM 23 /* there is work to be done for PCM */
263 /* Event notifications */
264 #define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */
265 #define IVTV_F_I_EV_VSYNC 29 /* VSYNC event */
266 #define IVTV_F_I_EV_VSYNC_FIELD 30 /* VSYNC event field (0 = first, 1 = second field) */
267 #define IVTV_F_I_EV_VSYNC_ENABLED 31 /* VSYNC event enabled */
269 /* Scatter-Gather array element, used in DMA transfers */
270 struct ivtv_sg_element
{
276 struct ivtv_sg_host_element
{
282 struct ivtv_user_dma
{
285 struct page
*map
[IVTV_DMA_SG_OSD_ENT
];
286 /* Needed when dealing with highmem userspace buffers */
287 struct page
*bouncemap
[IVTV_DMA_SG_OSD_ENT
];
289 /* Base Dev SG Array for cx23415/6 */
290 struct ivtv_sg_element SGarray
[IVTV_DMA_SG_OSD_ENT
];
291 dma_addr_t SG_handle
;
294 /* SG List of Buffers */
295 struct scatterlist SGlist
[IVTV_DMA_SG_OSD_ENT
];
298 struct ivtv_dma_page_info
{
308 struct list_head list
;
309 dma_addr_t dma_handle
;
310 unsigned short b_flags
;
311 unsigned short dma_xfer_cnt
;
318 struct list_head list
; /* the list of buffers in this queue */
319 u32 buffers
; /* number of buffers in this queue */
320 u32 length
; /* total number of bytes of available buffer space */
321 u32 bytesused
; /* total number of bytes used in this queue */
324 struct ivtv
; /* forward reference */
327 /* These first four fields are always set, even if the stream
328 is not actually created. */
329 struct video_device vdev
; /* vdev.v4l2_dev is NULL if there is no device */
330 struct ivtv
*itv
; /* for ease of use */
331 const char *name
; /* name of the stream */
332 int type
; /* stream type */
334 struct v4l2_fh
*fh
; /* pointer to the streaming filehandle */
335 spinlock_t qlock
; /* locks access to the queues */
336 unsigned long s_flags
; /* status flags, see above */
337 int dma
; /* can be PCI_DMA_TODEVICE, PCI_DMA_FROMDEVICE or PCI_DMA_NONE */
347 wait_queue_head_t waitq
;
356 struct ivtv_queue q_free
; /* free buffers */
357 struct ivtv_queue q_full
; /* full buffers */
358 struct ivtv_queue q_io
; /* waiting for I/O */
359 struct ivtv_queue q_dma
; /* waiting for DMA */
360 struct ivtv_queue q_predma
; /* waiting for DMA */
362 /* DMA xfer counter, buffers belonging to the same DMA
363 xfer will have the same dma_xfer_cnt. */
366 /* Base Dev SG Array for cx23415/6 */
367 struct ivtv_sg_host_element
*sg_pending
;
368 struct ivtv_sg_host_element
*sg_processing
;
369 struct ivtv_sg_element
*sg_dma
;
370 dma_addr_t sg_handle
;
372 int sg_processing_size
;
375 /* SG List of Buffers */
376 struct scatterlist
*SGlist
;
379 struct ivtv_open_id
{
381 int type
; /* stream type */
382 int yuv_frames
; /* 1: started OUT_UDMA_YUV output mode */
386 static inline struct ivtv_open_id
*fh2id(struct v4l2_fh
*fh
)
388 return container_of(fh
, struct ivtv_open_id
, fh
);
391 struct yuv_frame_info
418 #define IVTV_YUV_MODE_INTERLACED 0x00
419 #define IVTV_YUV_MODE_PROGRESSIVE 0x01
420 #define IVTV_YUV_MODE_AUTO 0x02
421 #define IVTV_YUV_MODE_MASK 0x03
423 #define IVTV_YUV_SYNC_EVEN 0x00
424 #define IVTV_YUV_SYNC_ODD 0x04
425 #define IVTV_YUV_SYNC_MASK 0x04
427 #define IVTV_YUV_BUFFERS 8
429 struct yuv_playback_info
478 u8 track_osd
; /* Should yuv output track the OSD size & position */
498 atomic_t next_dma_frame
;
499 atomic_t next_fill_frame
;
501 u32 yuv_forced_update
;
504 u8 fields_lapsed
; /* Counter used when delaying a frame */
506 struct yuv_frame_info new_frame_info
[IVTV_YUV_BUFFERS
];
507 struct yuv_frame_info old_frame_info
;
508 struct yuv_frame_info old_frame_info_args
;
511 dma_addr_t blanking_dmaptr
;
515 u8 draw_frame
; /* PVR350 buffer to draw into */
516 u8 max_frames_buffered
; /* Maximum number of frames to buffer */
518 struct v4l2_rect main_rect
;
522 u8 running
; /* Have any frames been displayed */
525 #define IVTV_VBI_FRAMES 32
529 u8 odd
[2]; /* two-byte payload of odd field */
530 u8 even
[2]; /* two-byte payload of even field */;
534 u8 data
[5]; /* five-byte VPS payload */
538 /* VBI general data, does not change during streaming */
540 u32 raw_decoder_line_size
; /* raw VBI line size from digitizer */
541 u8 raw_decoder_sav_odd_field
; /* raw VBI Start Active Video digitizer code of odd field */
542 u8 raw_decoder_sav_even_field
; /* raw VBI Start Active Video digitizer code of even field */
543 u32 sliced_decoder_line_size
; /* sliced VBI line size from digitizer */
544 u8 sliced_decoder_sav_odd_field
; /* sliced VBI Start Active Video digitizer code of odd field */
545 u8 sliced_decoder_sav_even_field
; /* sliced VBI Start Active Video digitizer code of even field */
547 u32 start
[2]; /* start of first VBI line in the odd/even fields */
548 u32 count
; /* number of VBI lines per field */
549 u32 raw_size
; /* size of raw VBI line from the digitizer */
550 u32 sliced_size
; /* size of sliced VBI line from the digitizer */
552 u32 dec_start
; /* start in decoder memory of VBI re-insertion buffers */
553 u32 enc_start
; /* start in encoder memory of VBI capture buffers */
554 u32 enc_size
; /* size of VBI capture area */
555 int fpi
; /* number of VBI frames per interrupt */
557 struct v4l2_format in
; /* current VBI capture format */
558 struct v4l2_sliced_vbi_format
*sliced_in
; /* convenience pointer to sliced struct in vbi.in union */
559 int insert_mpeg
; /* if non-zero, then embed VBI data in MPEG stream */
561 /* Raw VBI compatibility hack */
563 u32 frame
; /* frame counter hack needed for backwards compatibility
564 of old VBI software */
566 /* Sliced VBI output data */
568 struct vbi_cc cc_payload
[256]; /* sliced VBI CC payload array: it is an array to
569 prevent dropping CC data if they couldn't be
570 processed fast enough */
571 int cc_payload_idx
; /* index in cc_payload */
572 u8 cc_missing_cnt
; /* counts number of frames without CC for passthrough mode */
573 int wss_payload
; /* sliced VBI WSS payload */
574 u8 wss_missing_cnt
; /* counts number of frames without WSS for passthrough mode */
575 struct vbi_vps vps_payload
; /* sliced VBI VPS payload */
577 /* Sliced VBI capture data */
579 struct v4l2_sliced_vbi_data sliced_data
[36]; /* sliced VBI storage for VBI encoder stream */
580 struct v4l2_sliced_vbi_data sliced_dec_data
[36];/* sliced VBI storage for VBI decoder stream */
582 /* VBI Embedding data */
584 /* Buffer for VBI data inserted into MPEG stream.
585 The first byte is a dummy byte that's never used.
586 The next 16 bytes contain the MPEG header for the VBI data,
587 the remainder is the actual VBI data.
588 The max size accepted by the MPEG VBI reinsertion turns out
589 to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes,
590 where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is
591 a single line header byte and 2 * 18 is the number of VBI lines per frame.
593 However, it seems that the data must be 1K aligned, so we have to
594 pad the data until the 1 or 2 K boundary.
596 This pointer array will allocate 2049 bytes to store each VBI frame. */
597 u8
*sliced_mpeg_data
[IVTV_VBI_FRAMES
];
598 u32 sliced_mpeg_size
[IVTV_VBI_FRAMES
];
599 struct ivtv_buffer sliced_mpeg_buf
; /* temporary buffer holding data from sliced_mpeg_data */
600 u32 inserted_frame
; /* index in sliced_mpeg_size of next sliced data
601 to be inserted in the MPEG stream */
604 /* forward declaration of struct defined in ivtv-cards.h */
607 /* Struct to hold info about ivtv cards */
609 /* General fixed card data */
610 struct pci_dev
*pdev
; /* PCI device */
611 const struct ivtv_card
*card
; /* card information */
612 const char *card_name
; /* full name of the card */
613 const struct ivtv_card_tuner_i2c
*card_i2c
; /* i2c addresses to probe for tuner */
614 u8 has_cx23415
; /* 1 if it is a cx23415 based card, 0 for cx23416 */
615 u8 pvr150_workaround
; /* 1 if the cx25840 needs to workaround a PVR150 bug */
616 u8 nof_inputs
; /* number of video inputs */
617 u8 nof_audio_inputs
; /* number of audio inputs */
618 u32 v4l2_cap
; /* V4L2 capabilities of card */
619 u32 hw_flags
; /* hardware description of the board */
620 v4l2_std_id tuner_std
; /* the norm of the card's tuner (fixed) */
621 struct v4l2_subdev
*sd_video
; /* controlling video decoder subdev */
622 bool sd_video_is_streaming
; /* is video already streaming? */
623 struct v4l2_subdev
*sd_audio
; /* controlling audio subdev */
624 struct v4l2_subdev
*sd_muxer
; /* controlling audio muxer subdev */
625 resource_size_t base_addr
; /* PCI resource base address */
626 volatile void __iomem
*enc_mem
; /* pointer to mapped encoder memory */
627 volatile void __iomem
*dec_mem
; /* pointer to mapped decoder memory */
628 volatile void __iomem
*reg_mem
; /* pointer to mapped registers */
629 struct ivtv_options options
; /* user options */
631 struct v4l2_device v4l2_dev
;
632 struct cx2341x_handler cxhdl
;
634 /* PTS/Frame count control cluster */
635 struct v4l2_ctrl
*ctrl_pts
;
636 struct v4l2_ctrl
*ctrl_frame
;
639 /* Audio Playback control cluster */
640 struct v4l2_ctrl
*ctrl_audio_playback
;
641 struct v4l2_ctrl
*ctrl_audio_multilingual_playback
;
643 struct v4l2_ctrl_handler hdl_gpio
;
644 struct v4l2_subdev sd_gpio
; /* GPIO sub-device */
647 /* High-level state info */
648 unsigned long i_flags
; /* global ivtv flags */
649 u8 is_50hz
; /* 1 if the current capture standard is 50 Hz */
650 u8 is_60hz
/* 1 if the current capture standard is 60 Hz */;
651 u8 is_out_50hz
/* 1 if the current TV output standard is 50 Hz */;
652 u8 is_out_60hz
/* 1 if the current TV output standard is 60 Hz */;
653 int output_mode
; /* decoder output mode: NONE, MPG, YUV, UDMA YUV, passthrough */
654 u32 audio_input
; /* current audio input */
655 u32 active_input
; /* current video input */
656 u32 active_output
; /* current video output */
657 v4l2_std_id std
; /* current capture TV standard */
658 v4l2_std_id std_out
; /* current TV output standard */
659 u8 audio_stereo_mode
; /* decoder setting how to handle stereo MPEG audio */
660 u8 audio_bilingual_mode
; /* decoder setting how to handle bilingual MPEG audio */
663 spinlock_t lock
; /* lock access to this struct */
664 struct mutex serialize_lock
; /* mutex used to serialize open/close/start/stop/ioctl operations */
667 int stream_buf_size
[IVTV_MAX_STREAMS
]; /* stream buffer size */
668 struct ivtv_stream streams
[IVTV_MAX_STREAMS
]; /* stream data */
669 atomic_t capturing
; /* count number of active capture streams */
670 atomic_t decoding
; /* count number of active decoding streams */
672 /* ALSA interface for PCM capture stream */
673 struct snd_ivtv_card
*alsa
;
674 void (*pcm_announce_callback
)(struct snd_ivtv_card
*card
, u8
*pcm_data
,
677 /* Used for ivtv-alsa module loading */
678 struct work_struct request_module_wk
;
680 /* Interrupts & DMA */
681 u32 irqmask
; /* active interrupts */
682 u32 irq_rr_idx
; /* round-robin stream index */
683 struct kthread_worker irq_worker
; /* kthread worker for PIO/YUV/VBI actions */
684 struct task_struct
*irq_worker_task
; /* task for irq_worker */
685 struct kthread_work irq_work
; /* kthread work entry */
686 spinlock_t dma_reg_lock
; /* lock access to DMA engine registers */
687 int cur_dma_stream
; /* index of current stream doing DMA (-1 if none) */
688 int cur_pio_stream
; /* index of current stream doing PIO (-1 if none) */
689 u32 dma_data_req_offset
; /* store offset in decoder memory of current DMA request */
690 u32 dma_data_req_size
; /* store size of current DMA request */
691 int dma_retries
; /* current DMA retry attempt */
692 struct ivtv_user_dma udma
; /* user based DMA for OSD */
693 struct timer_list dma_timer
; /* timer used to catch unfinished DMAs */
694 u32 last_vsync_field
; /* last seen vsync field */
695 wait_queue_head_t dma_waitq
; /* wake up when the current DMA is finished */
696 wait_queue_head_t eos_waitq
; /* wake up when EOS arrives */
697 wait_queue_head_t event_waitq
; /* wake up when the next decoder event arrives */
698 wait_queue_head_t vsync_waitq
; /* wake up when the next decoder vsync arrives */
702 struct ivtv_mailbox_data enc_mbox
; /* encoder mailboxes */
703 struct ivtv_mailbox_data dec_mbox
; /* decoder mailboxes */
704 struct ivtv_api_cache api_cache
[256]; /* cached API commands */
708 struct i2c_adapter i2c_adap
;
709 struct i2c_algo_bit_data i2c_algo
;
710 struct i2c_client i2c_client
;
711 int i2c_state
; /* i2c bit state */
712 struct mutex i2c_bus_lock
; /* lock i2c bus */
714 struct IR_i2c_init_data ir_i2c_init_data
;
716 /* Program Index information */
717 u32 pgm_info_offset
; /* start of pgm info in encoder memory */
718 u32 pgm_info_num
; /* number of elements in the pgm cyclic buffer in encoder memory */
719 u32 pgm_info_write_idx
; /* last index written by the card that was transferred to pgm_info[] */
720 u32 pgm_info_read_idx
; /* last index in pgm_info read by the application */
721 struct v4l2_enc_idx_entry pgm_info
[IVTV_MAX_PGM_INDEX
]; /* filled from the pgm cyclic buffer on the card */
725 u32 open_id
; /* incremented each time an open occurs, is >= 1 */
726 int search_pack_header
; /* 1 if ivtv_copy_buf_to_user() is scanning for a pack header (0xba) */
727 int speed
; /* current playback speed setting */
728 u8 speed_mute_audio
; /* 1 if audio should be muted when fast forward */
729 u64 mpg_data_received
; /* number of bytes received from the MPEG stream */
730 u64 vbi_data_inserted
; /* number of VBI bytes inserted into the MPEG stream */
731 u32 last_dec_timing
[3]; /* cache last retrieved pts/scr/frame values */
732 unsigned long dualwatch_jiffies
;/* jiffies value of the previous dualwatch check */
733 u32 dualwatch_stereo_mode
; /* current detected dualwatch stereo mode */
737 struct vbi_info vbi
; /* VBI-specific data */
741 struct yuv_playback_info yuv_info
; /* YUV playback data */
745 unsigned long osd_video_pbase
;
746 int osd_global_alpha_state
; /* 1 = global alpha is on */
747 int osd_local_alpha_state
; /* 1 = local alpha is on */
748 int osd_chroma_key_state
; /* 1 = chroma-keying is on */
749 u8 osd_global_alpha
; /* current global alpha */
750 u32 osd_chroma_key
; /* current chroma key */
751 struct v4l2_rect osd_rect
; /* current OSD position and size */
752 struct v4l2_rect main_rect
; /* current Main window position and size */
753 struct osd_info
*osd_info
; /* ivtvfb private OSD info */
754 void (*ivtvfb_restore
)(struct ivtv
*itv
); /* Used for a warm start */
757 static inline struct ivtv
*to_ivtv(struct v4l2_device
*v4l2_dev
)
759 return container_of(v4l2_dev
, struct ivtv
, v4l2_dev
);
762 /* ivtv extensions to be loaded */
763 extern int (*ivtv_ext_init
)(struct ivtv
*);
766 extern int ivtv_first_minor
;
768 /*==============Prototypes==================*/
771 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
);
772 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
);
774 /* try to set output mode, return current mode. */
775 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
);
777 /* return current output stream based on current mode */
778 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
);
780 /* Return non-zero if a signal is pending */
781 int ivtv_msleep_timeout(unsigned int msecs
, int intr
);
783 /* Wait on queue, returns -EINTR if interrupted */
784 int ivtv_waitq(wait_queue_head_t
*waitq
);
786 /* Read Hauppauge eeprom */
787 struct tveeprom
; /* forward reference */
788 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
);
790 /* First-open initialization: load firmware, init cx25840, etc. */
791 int ivtv_init_on_first_open(struct ivtv
*itv
);
793 /* Test if the current VBI mode is raw (1) or sliced (0) */
794 static inline int ivtv_raw_vbi(const struct ivtv
*itv
)
796 return itv
->vbi
.in
.type
== V4L2_BUF_TYPE_VBI_CAPTURE
;
799 /* This is a PCI post thing, where if the pci register is not read, then
800 the write doesn't always take effect right away. By reading back the
801 register any pending PCI writes will be performed (in order), and so
802 you can be sure that the writes are guaranteed to be done.
804 Rarely needed, only in some timing sensitive cases.
805 Apparently if this is not done some motherboards seem
806 to kill the firmware and get into the broken state until computer is
808 #define write_sync(val, reg) \
809 do { writel(val, reg); readl(reg); } while (0)
811 #define read_reg(reg) readl(itv->reg_mem + (reg))
812 #define write_reg(val, reg) writel(val, itv->reg_mem + (reg))
813 #define write_reg_sync(val, reg) \
814 do { write_reg(val, reg); read_reg(reg); } while (0)
816 #define read_enc(addr) readl(itv->enc_mem + (u32)(addr))
817 #define write_enc(val, addr) writel(val, itv->enc_mem + (u32)(addr))
818 #define write_enc_sync(val, addr) \
819 do { write_enc(val, addr); read_enc(addr); } while (0)
821 #define read_dec(addr) readl(itv->dec_mem + (u32)(addr))
822 #define write_dec(val, addr) writel(val, itv->dec_mem + (u32)(addr))
823 #define write_dec_sync(val, addr) \
824 do { write_dec(val, addr); read_dec(addr); } while (0)
826 /* Call the specified callback for all subdevs matching hw (if 0, then
827 match them all). Ignore any errors. */
828 #define ivtv_call_hw(itv, hw, o, f, args...) \
829 v4l2_device_mask_call_all(&(itv)->v4l2_dev, hw, o, f, ##args)
831 #define ivtv_call_all(itv, o, f, args...) ivtv_call_hw(itv, 0, o, f , ##args)
833 /* Call the specified callback for all subdevs matching hw (if 0, then
834 match them all). If the callback returns an error other than 0 or
835 -ENOIOCTLCMD, then return with that error code. */
836 #define ivtv_call_hw_err(itv, hw, o, f, args...) \
837 v4l2_device_mask_call_until_err(&(itv)->v4l2_dev, hw, o, f, ##args)
839 #define ivtv_call_all_err(itv, o, f, args...) ivtv_call_hw_err(itv, 0, o, f , ##args)