?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
drm/rockchip: Don't change hdmi reference clock rate
[drm/drm-misc.git] / drivers / media / usb / em28xx / em28xx-cards.c
bloba51cbcf429e130ff7f2e0e139759b91a4f1cc828
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
4 // video capture devices
5 //
6 // Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
7 // Markus Rechberger <mrechberger@gmail.com>
8 // Mauro Carvalho Chehab <mchehab@kernel.org>
9 // Sascha Sommer <saschasommer@freenet.de>
10 // Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
11
12 #include "em28xx.h"
13
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/slab.h>
17 #include <linux/delay.h>
18 #include <linux/i2c.h>
19 #include <linux/usb.h>
20 #include <media/tuner.h>
21 #include <media/drv-intf/msp3400.h>
22 #include <media/i2c/saa7115.h>
23 #include <dt-bindings/media/tvp5150.h>
24 #include <media/i2c/tvaudio.h>
25 #include <media/tveeprom.h>
26 #include <media/v4l2-common.h>
27 #include <sound/ac97_codec.h>
28
29 #define DRIVER_NAME "em28xx"
30
31 static int tuner = -1;
32 module_param(tuner, int, 0444);
33 MODULE_PARM_DESC(tuner, "tuner type");
34
35 static unsigned int disable_ir;
36 module_param(disable_ir, int, 0444);
37 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
38
39 static unsigned int disable_usb_speed_check;
40 module_param(disable_usb_speed_check, int, 0444);
41 MODULE_PARM_DESC(disable_usb_speed_check,
42 "override min bandwidth requirement of 480M bps");
43
44 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
45 module_param_array(card, int, NULL, 0444);
46 MODULE_PARM_DESC(card, "card type");
47
48 static int usb_xfer_mode = -1;
49 module_param(usb_xfer_mode, int, 0444);
50 MODULE_PARM_DESC(usb_xfer_mode,
51 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
52
53 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
54 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
55
56 struct em28xx_hash_table {
57 unsigned long hash;
58 unsigned int model;
59 unsigned int tuner;
60 };
61
62 static void em28xx_pre_card_setup(struct em28xx *dev);
63
64 /*
65 * Reset sequences for analog/digital modes
66 */
67
68 /* Reset for the most [analog] boards */
69 static const struct em28xx_reg_seq default_analog[] = {
70 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
71 { -1, -1, -1, -1},
72 };
73
74 /* Reset for the most [digital] boards */
75 static const struct em28xx_reg_seq default_digital[] = {
76 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
77 { -1, -1, -1, -1},
78 };
79
80 /* Board :Zolid Hybrid Tv Stick */
81 static struct em28xx_reg_seq zolid_tuner[] = {
82 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100},
83 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100},
84 { -1, -1, -1, -1},
85 };
86
87 static struct em28xx_reg_seq zolid_digital[] = {
88 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100},
89 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100},
90 {EM2880_R04_GPO, 0x04, 0xff, 100},
91 {EM2880_R04_GPO, 0x0c, 0xff, 100},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 analog */
96 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10},
98 { 0x05, 0xff, 0x10, 10},
99 { -1, -1, -1, -1},
100 };
101
102 /* Board Hauppauge WinTV HVR 900 digital */
103 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
105 {EM2880_R04_GPO, 0x04, 0x0f, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Board Hauppauge WinTV HVR 900 (R2) digital */
111 static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10},
113 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
114 { -1, -1, -1, -1},
115 };
116
117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
118 static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10},
120 { -1, -1, -1, -1},
121 };
122
123 /* Board - EM2882 Kworld 315U digital */
124 static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
125 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
126 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
127 {EM2880_R04_GPO, 0x04, 0xff, 10},
128 {EM2880_R04_GPO, 0x0c, 0xff, 10},
129 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10},
130 { -1, -1, -1, -1},
131 };
132
133 static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 {EM2880_R04_GPO, 0x08, 0xff, 10},
137 {EM2880_R04_GPO, 0x0c, 0xff, 10},
138 { -1, -1, -1, -1},
139 };
140
141 static const struct em28xx_reg_seq kworld_330u_analog[] = {
142 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
143 {EM2880_R04_GPO, 0x00, 0xff, 10},
144 { -1, -1, -1, -1},
145 };
146
147 static const struct em28xx_reg_seq kworld_330u_digital[] = {
148 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
149 {EM2880_R04_GPO, 0x08, 0xff, 10},
150 { -1, -1, -1, -1},
151 };
152
153 /*
154 * Evga inDtube
155 * GPIO0 - Enable digital power (s5h1409) - low to enable
156 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
157 * GPIO4 - xc3028 reset
158 * GOP3 - s5h1409 reset
159 */
160 static const struct em28xx_reg_seq evga_indtube_analog[] = {
161 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
162 { -1, -1, -1, -1},
163 };
164
165 static const struct em28xx_reg_seq evga_indtube_digital[] = {
166 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1},
167 {EM2880_R04_GPO, 0x04, 0xff, 10},
168 {EM2880_R04_GPO, 0x0c, 0xff, 1},
169 { -1, -1, -1, -1},
170 };
171
172 /*
173 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
174 * EM_GPIO_0 - currently unknown
175 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
176 * EM_GPIO_2 - currently unknown
177 * EM_GPIO_3 - currently unknown
178 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
179 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
180 * EM_GPIO_6 - currently unknown
181 * EM_GPIO_7 - currently unknown
182 */
183 static const struct em28xx_reg_seq kworld_a340_digital[] = {
184 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
185 { -1, -1, -1, -1},
186 };
187
188 static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
189 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
190 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
191 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
192 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
193 { -1, -1, -1, -1},
194 };
195
196 /* Pinnacle Hybrid Pro eb1a:2881 */
197 static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
198 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10},
199 { -1, -1, -1, -1},
200 };
201
202 static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
203 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
204 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
205 {EM2880_R04_GPO, 0x0c, 0xff, 1},
206 { -1, -1, -1, -1},
207 };
208
209 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
210 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10},
211 {EM2880_R04_GPO, 0x00, 0xff, 10},
212 { -1, -1, -1, -1},
213 };
214
215 static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
216 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
217 {EM2880_R04_GPO, 0x08, 0xff, 10},
218 { -1, -1, -1, -1},
219 };
220
221 /*
222 * PCTV HD Mini (80e) GPIOs
223 * 0-5: not used
224 * 6: demod reset, active low
225 * 7: LED on, active high
226 */
227 static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
228 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
229 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
230 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10},
231 { -1, -1, -1, -1},
232 };
233
234 /*
235 * eb1a:2868 Reddo DVB-C USB TV Box
236 * GPIO4 - CU1216L NIM
237 * Other GPIOs seems to be don't care.
238 */
239 static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10},
245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10},
246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
247 { -1, -1, -1, -1},
248 };
249
250 /* Callback for the most boards */
251 static const struct em28xx_reg_seq default_tuner_gpio[] = {
252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10},
254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10},
255 { -1, -1, -1, -1},
256 };
257
258 /* Mute/unmute */
259 static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
260 {EM2820_R08_GPIO_CTRL, 5, 7, 10},
261 { -1, -1, -1, -1},
262 };
263
264 static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
265 {EM2820_R08_GPIO_CTRL, 4, 7, 10},
266 { -1, -1, -1, -1},
267 };
268
269 static const struct em28xx_reg_seq compro_mute_gpio[] = {
270 {EM2820_R08_GPIO_CTRL, 6, 7, 10},
271 { -1, -1, -1, -1},
272 };
273
274 /* Terratec AV350 */
275 static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10},
277 { -1, -1, -1, -1},
278 };
279
280 static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static const struct em28xx_reg_seq silvercrest_reg_seq[] = {
286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10},
288 { -1, -1, -1, -1},
289 };
290
291 static const struct em28xx_reg_seq vc211a_enable[] = {
292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10},
293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10},
294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10},
295 { -1, -1, -1, -1},
296 };
297
298 static const struct em28xx_reg_seq dikom_dk300_digital[] = {
299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10},
300 {EM2880_R04_GPO, 0x08, 0xff, 10},
301 { -1, -1, -1, -1},
302 };
303
304 /* Reset for the most [digital] boards */
305 static const struct em28xx_reg_seq leadership_digital[] = {
306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
307 { -1, -1, -1, -1},
308 };
309
310 static const struct em28xx_reg_seq leadership_reset[] = {
311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10},
313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10},
314 { -1, -1, -1, -1},
315 };
316
317 /*
318 * 2013:024f PCTV nanoStick T2 290e
319 * GPIO_6 - demod reset
320 * GPIO_7 - LED
321 */
322 static const struct em28xx_reg_seq pctv_290e[] = {
323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80},
324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */
325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */
326 { -1, -1, -1, -1},
327 };
328
329 #if 0
330 static const struct em28xx_reg_seq terratec_h5_gpio[] = {
331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100},
333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50},
334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50},
335 { -1, -1, -1, -1},
336 };
337
338 static const struct em28xx_reg_seq terratec_h5_digital[] = {
339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
342 { -1, -1, -1, -1},
343 };
344 #endif
345
346 /*
347 * 2013:024f PCTV DVB-S2 Stick 460e
348 * GPIO_0 - POWER_ON
349 * GPIO_1 - BOOST
350 * GPIO_2 - VUV_LNB (red LED)
351 * GPIO_3 - EXT_12V
352 * GPIO_4 - INT_DEM (DEMOD GPIO_0)
353 * GPIO_5 - INT_LNB
354 * GPIO_6 - RESET_DEM
355 * GPIO_7 - LED (green LED)
356 */
357 static const struct em28xx_reg_seq pctv_460e[] = {
358 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50},
359 { 0x0d, 0xff, 0xff, 50},
360 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */
361 { 0x0d, 0x42, 0xff, 50},
362 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */
363 { -1, -1, -1, -1},
364 };
365
366 static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = {
367 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */
369 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35},
370 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
371 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10},
372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10},
373 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10},
374 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20},
375 { -1, -1, -1, -1},
376 };
377
378 /*
379 * 2013:0258 PCTV DVB-S2 Stick (461e)
380 * GPIO 0 = POWER_ON
381 * GPIO 1 = BOOST
382 * GPIO 2 = VUV_LNB (red LED)
383 * GPIO 3 = #EXT_12V
384 * GPIO 4 = INT_DEM
385 * GPIO 5 = INT_LNB
386 * GPIO 6 = #RESET_DEM
387 * GPIO 7 = P07_LED (green LED)
388 */
389 static const struct em28xx_reg_seq pctv_461e[] = {
390 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0},
391 {0x0d, 0xff, 0xff, 0},
392 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */
393 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */
394 {0x0d, 0x42, 0xff, 0},
395 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0},
396 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */
397 { -1, -1, -1, -1},
398 };
399
400 #if 0
401 static const struct em28xx_reg_seq hauppauge_930c_gpio[] = {
402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */
404 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10},
405 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10},
406 { -1, -1, -1, -1},
407 };
408
409 static const struct em28xx_reg_seq hauppauge_930c_digital[] = {
410 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10},
411 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100},
412 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10},
413 { -1, -1, -1, -1},
414 };
415 #endif
416
417 /*
418 * 1b80:e425 MaxMedia UB425-TC
419 * 1b80:e1cc Delock 61959
420 * GPIO_6 - demod reset, 0=active
421 * GPIO_7 - LED, 0=active
422 */
423 static const struct em28xx_reg_seq maxmedia_ub425_tc[] = {
424 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100},
425 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */
426 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */
427 { -1, -1, -1, -1},
428 };
429
430 /*
431 * 2304:0242 PCTV QuatroStick (510e)
432 * GPIO_2: decoder reset, 0=active
433 * GPIO_4: decoder suspend, 0=active
434 * GPIO_6: demod reset, 0=active
435 * GPIO_7: LED, 1=active
436 */
437 static const struct em28xx_reg_seq pctv_510e[] = {
438 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
439 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
440 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
441 { -1, -1, -1, -1},
442 };
443
444 /*
445 * 2013:0251 PCTV QuatroStick nano (520e)
446 * GPIO_2: decoder reset, 0=active
447 * GPIO_4: decoder suspend, 0=active
448 * GPIO_6: demod reset, 0=active
449 * GPIO_7: LED, 1=active
450 */
451 static const struct em28xx_reg_seq pctv_520e[] = {
452 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100},
453 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */
454 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */
455 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */
456 { -1, -1, -1, -1},
457 };
458
459 /*
460 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
461 * reg 0x80/0x84:
462 * GPIO_0: capturing LED, 0=on, 1=off
463 * GPIO_2: AV mute button, 0=pressed, 1=unpressed
464 * GPIO 3: illumination button, 0=pressed, 1=unpressed
465 * GPIO_6: illumination/flash LED, 0=on, 1=off
466 * reg 0x81/0x85:
467 * GPIO_7: snapshot button, 0=pressed, 1=unpressed
468 */
469 static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = {
470 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10},
471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10},
472 { -1, -1, -1, -1},
473 };
474
475 static const struct em28xx_reg_seq pctv_292e[] = {
476 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
477 {0x0d, 0xff, 0xff, 950},
478 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100},
479 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410},
480 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300},
481 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60},
482 {0x0d, 0x42, 0xff, 50},
483 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
484 {-1, -1, -1, -1},
485 };
486
487 static const struct em28xx_reg_seq terratec_t2_stick_hd[] = {
488 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
489 {0x0d, 0xff, 0xff, 600},
490 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
491 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100},
492 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100},
493 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300},
494 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100},
495 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300},
496 {0x0d, 0x42, 0xff, 1000},
497 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0},
498 {-1, -1, -1, -1},
499 };
500
501 static const struct em28xx_reg_seq plex_px_bcud[] = {
502 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
503 {0x0d, 0xff, 0xff, 0},
504 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0},
505 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0},
506 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100},
507 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0},
508 {0x0d, 0x42, 0xff, 1000},
509 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10},
510 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10},
511 {0x73, 0xfd, 0xff, 100},
512 {-1, -1, -1, -1},
513 };
514
515 /*
516 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc
517 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk
518 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc
519 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk
520 * reg 0x80/0x84:
521 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off
522 * GPIO_1: Green LED tuner 1, 0=on, 1=off
523 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off
524 * GPIO_3: Green LED tuner 2, 0=on, 1=off
525 * GPIO_5: Reset #2, 0=active
526 * GPIO_6: Reset #1, 0=active
527 */
528 static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = {
529 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
530 {0x0d, 0xff, 0xff, 200},
531 {0x50, 0x04, 0xff, 300},
532 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */
533 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
534 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */
535 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
536 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */
537 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
538 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
539 {-1, -1, -1, -1},
540 };
541
542 /* Hauppauge USB QuadHD */
543 static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = {
544 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0},
545 {0x0d, 0xff, 0xff, 200},
546 {0x50, 0x04, 0xff, 300},
547 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */
548 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100},
549 {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */
550 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100},
551 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50},
552 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50},
553 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50},
554 {-1, -1, -1, -1},
555 };
556
557 /*
558 * MyGica USB TV Box
559 * GPIO_1,0: 00=Composite audio
560 * 01=Tuner audio
561 * 10=Mute audio
562 * 11=FM radio? (if equipped)
563 * GPIO_2-6: Unused
564 * GPIO_7: ??
565 */
566 static const struct em28xx_reg_seq mygica_utv3_composite_audio_gpio[] = {
567 {EM2820_R08_GPIO_CTRL, 0xfc, 0xff, 0},
568 { -1, -1, -1, -1},
569 };
570
571 static const struct em28xx_reg_seq mygica_utv3_tuner_audio_gpio[] = {
572 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 0},
573 { -1, -1, -1, -1},
574 };
575
576 static const struct em28xx_reg_seq mygica_utv3_suspend_gpio[] = {
577 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 0},
578 { -1, -1, -1, -1},
579 };
580
581 /*
582 * Button definitions
583 */
584 static const struct em28xx_button std_snapshot_button[] = {
585 {
586 .role = EM28XX_BUTTON_SNAPSHOT,
587 .reg_r = EM28XX_R0C_USBSUSP,
588 .reg_clearing = EM28XX_R0C_USBSUSP,
589 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT,
590 .inverted = 0,
591 },
592 {-1, 0, 0, 0, 0},
593 };
594
595 static const struct em28xx_button speedlink_vad_laplace_buttons[] = {
596 {
597 .role = EM28XX_BUTTON_SNAPSHOT,
598 .reg_r = EM2874_R85_GPIO_P1_STATE,
599 .mask = 0x80,
600 .inverted = 1,
601 },
602 {
603 .role = EM28XX_BUTTON_ILLUMINATION,
604 .reg_r = EM2874_R84_GPIO_P0_STATE,
605 .mask = 0x08,
606 .inverted = 1,
607 },
608 {-1, 0, 0, 0, 0},
609 };
610
611 /*
612 * LED definitions
613 */
614 static struct em28xx_led speedlink_vad_laplace_leds[] = {
615 {
616 .role = EM28XX_LED_ANALOG_CAPTURING,
617 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
618 .gpio_mask = 0x01,
619 .inverted = 1,
620 },
621 {
622 .role = EM28XX_LED_ILLUMINATION,
623 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
624 .gpio_mask = 0x40,
625 .inverted = 1,
626 },
627 {-1, 0, 0, 0},
628 };
629
630 static struct em28xx_led kworld_ub435q_v3_leds[] = {
631 {
632 .role = EM28XX_LED_DIGITAL_CAPTURING,
633 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
634 .gpio_mask = 0x80,
635 .inverted = 1,
636 },
637 {-1, 0, 0, 0},
638 };
639
640 static struct em28xx_led pctv_80e_leds[] = {
641 {
642 .role = EM28XX_LED_DIGITAL_CAPTURING,
643 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
644 .gpio_mask = 0x80,
645 .inverted = 0,
646 },
647 {-1, 0, 0, 0},
648 };
649
650 static struct em28xx_led terratec_grabby_leds[] = {
651 {
652 .role = EM28XX_LED_ANALOG_CAPTURING,
653 .gpio_reg = EM2820_R08_GPIO_CTRL,
654 .gpio_mask = EM_GPIO_3,
655 .inverted = 1,
656 },
657 {-1, 0, 0, 0},
658 };
659
660 static struct em28xx_led hauppauge_dualhd_leds[] = {
661 {
662 .role = EM28XX_LED_DIGITAL_CAPTURING,
663 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
664 .gpio_mask = EM_GPIO_1,
665 .inverted = 1,
666 },
667 {
668 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
669 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
670 .gpio_mask = EM_GPIO_3,
671 .inverted = 1,
672 },
673 {-1, 0, 0, 0},
674 };
675
676 static struct em28xx_led hauppauge_usb_quadhd_leds[] = {
677 {
678 .role = EM28XX_LED_DIGITAL_CAPTURING,
679 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
680 .gpio_mask = EM_GPIO_2,
681 .inverted = 1,
682 },
683 {
684 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2,
685 .gpio_reg = EM2874_R80_GPIO_P0_CTRL,
686 .gpio_mask = EM_GPIO_0,
687 .inverted = 1,
688 },
689 {-1, 0, 0, 0},
690 };
691
692 /*
693 * Board definitions
694 */
695 const struct em28xx_board em28xx_boards[] = {
696 [EM2750_BOARD_UNKNOWN] = {
697 .name = "EM2710/EM2750/EM2751 webcam grabber",
698 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
699 .tuner_type = TUNER_ABSENT,
700 .is_webcam = 1,
701 .input = { {
702 .type = EM28XX_VMUX_COMPOSITE,
703 .vmux = 0,
704 .amux = EM28XX_AMUX_VIDEO,
705 .gpio = silvercrest_reg_seq,
706 } },
707 },
708 [EM2800_BOARD_UNKNOWN] = {
709 .name = "Unknown EM2800 video grabber",
710 .is_em2800 = 1,
711 .tda9887_conf = TDA9887_PRESENT,
712 .decoder = EM28XX_SAA711X,
713 .tuner_type = TUNER_ABSENT,
714 .input = { {
715 .type = EM28XX_VMUX_COMPOSITE,
716 .vmux = SAA7115_COMPOSITE0,
717 .amux = EM28XX_AMUX_LINE_IN,
718 }, {
719 .type = EM28XX_VMUX_SVIDEO,
720 .vmux = SAA7115_SVIDEO3,
721 .amux = EM28XX_AMUX_LINE_IN,
722 } },
723 },
724 [EM2820_BOARD_UNKNOWN] = {
725 .name = "Unknown EM2750/28xx video grabber",
726 .tuner_type = TUNER_ABSENT,
727 .is_webcam = 1, /* To enable sensor probe */
728 },
729 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = {
730 .name = ":ZOLID HYBRID TV STICK",
731 .tuner_type = TUNER_XC2028,
732 .tuner_gpio = zolid_tuner,
733 .decoder = EM28XX_TVP5150,
734 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
735 .mts_firmware = 1,
736 .has_dvb = 1,
737 .dvb_gpio = zolid_digital,
738 },
739 [EM2750_BOARD_DLCW_130] = {
740 /* Beijing Huaqi Information Digital Technology Co., Ltd */
741 .name = "Huaqi DLCW-130",
742 .valid = EM28XX_BOARD_NOT_VALIDATED,
743 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
744 .tuner_type = TUNER_ABSENT,
745 .is_webcam = 1,
746 .input = { {
747 .type = EM28XX_VMUX_COMPOSITE,
748 .vmux = 0,
749 .amux = EM28XX_AMUX_VIDEO,
750 } },
751 },
752 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
753 .name = "Kworld PVR TV 2800 RF",
754 .tuner_type = TUNER_TEMIC_PAL,
755 .tda9887_conf = TDA9887_PRESENT,
756 .decoder = EM28XX_SAA711X,
757 .input = { {
758 .type = EM28XX_VMUX_COMPOSITE,
759 .vmux = SAA7115_COMPOSITE0,
760 .amux = EM28XX_AMUX_LINE_IN,
761 }, {
762 .type = EM28XX_VMUX_SVIDEO,
763 .vmux = SAA7115_SVIDEO3,
764 .amux = EM28XX_AMUX_LINE_IN,
765 } },
766 },
767 [EM2820_BOARD_GADMEI_TVR200] = {
768 .name = "Gadmei TVR200",
769 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
770 .tda9887_conf = TDA9887_PRESENT,
771 .decoder = EM28XX_SAA711X,
772 .input = { {
773 .type = EM28XX_VMUX_TELEVISION,
774 .vmux = SAA7115_COMPOSITE2,
775 .amux = EM28XX_AMUX_LINE_IN,
776 }, {
777 .type = EM28XX_VMUX_COMPOSITE,
778 .vmux = SAA7115_COMPOSITE0,
779 .amux = EM28XX_AMUX_LINE_IN,
780 }, {
781 .type = EM28XX_VMUX_SVIDEO,
782 .vmux = SAA7115_SVIDEO3,
783 .amux = EM28XX_AMUX_LINE_IN,
784 } },
785 },
786 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
787 .name = "Terratec Cinergy 250 USB",
788 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
789 .has_ir_i2c = 1,
790 .tda9887_conf = TDA9887_PRESENT,
791 .decoder = EM28XX_SAA711X,
792 .input = { {
793 .type = EM28XX_VMUX_TELEVISION,
794 .vmux = SAA7115_COMPOSITE2,
795 .amux = EM28XX_AMUX_VIDEO,
796 }, {
797 .type = EM28XX_VMUX_COMPOSITE,
798 .vmux = SAA7115_COMPOSITE0,
799 .amux = EM28XX_AMUX_LINE_IN,
800 }, {
801 .type = EM28XX_VMUX_SVIDEO,
802 .vmux = SAA7115_SVIDEO3,
803 .amux = EM28XX_AMUX_LINE_IN,
804 } },
805 },
806 [EM2820_BOARD_PINNACLE_USB_2] = {
807 .name = "Pinnacle PCTV USB 2",
808 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
809 .has_ir_i2c = 1,
810 .tda9887_conf = TDA9887_PRESENT,
811 .decoder = EM28XX_SAA711X,
812 .input = { {
813 .type = EM28XX_VMUX_TELEVISION,
814 .vmux = SAA7115_COMPOSITE2,
815 .amux = EM28XX_AMUX_VIDEO,
816 }, {
817 .type = EM28XX_VMUX_COMPOSITE,
818 .vmux = SAA7115_COMPOSITE0,
819 .amux = EM28XX_AMUX_LINE_IN,
820 }, {
821 .type = EM28XX_VMUX_SVIDEO,
822 .vmux = SAA7115_SVIDEO3,
823 .amux = EM28XX_AMUX_LINE_IN,
824 } },
825 },
826 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
827 .name = "Hauppauge WinTV USB 2",
828 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
829 .tda9887_conf = TDA9887_PRESENT |
830 TDA9887_PORT1_ACTIVE |
831 TDA9887_PORT2_ACTIVE,
832 .decoder = EM28XX_TVP5150,
833 .has_msp34xx = 1,
834 .has_ir_i2c = 1,
835 .input = { {
836 .type = EM28XX_VMUX_TELEVISION,
837 .vmux = TVP5150_COMPOSITE0,
838 .amux = MSP_INPUT_DEFAULT,
839 }, {
840 .type = EM28XX_VMUX_SVIDEO,
841 .vmux = TVP5150_SVIDEO,
842 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
843 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
844 } },
845 },
846 [EM2820_BOARD_DLINK_USB_TV] = {
847 .name = "D-Link DUB-T210 TV Tuner",
848 .valid = EM28XX_BOARD_NOT_VALIDATED,
849 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
850 .tda9887_conf = TDA9887_PRESENT,
851 .decoder = EM28XX_SAA711X,
852 .input = { {
853 .type = EM28XX_VMUX_TELEVISION,
854 .vmux = SAA7115_COMPOSITE2,
855 .amux = EM28XX_AMUX_LINE_IN,
856 }, {
857 .type = EM28XX_VMUX_COMPOSITE,
858 .vmux = SAA7115_COMPOSITE0,
859 .amux = EM28XX_AMUX_LINE_IN,
860 }, {
861 .type = EM28XX_VMUX_SVIDEO,
862 .vmux = SAA7115_SVIDEO3,
863 .amux = EM28XX_AMUX_LINE_IN,
864 } },
865 },
866 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
867 .name = "Hercules Smart TV USB 2.0",
868 .valid = EM28XX_BOARD_NOT_VALIDATED,
869 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
870 .tda9887_conf = TDA9887_PRESENT,
871 .decoder = EM28XX_SAA711X,
872 .input = { {
873 .type = EM28XX_VMUX_TELEVISION,
874 .vmux = SAA7115_COMPOSITE2,
875 .amux = EM28XX_AMUX_LINE_IN,
876 }, {
877 .type = EM28XX_VMUX_COMPOSITE,
878 .vmux = SAA7115_COMPOSITE0,
879 .amux = EM28XX_AMUX_LINE_IN,
880 }, {
881 .type = EM28XX_VMUX_SVIDEO,
882 .vmux = SAA7115_SVIDEO3,
883 .amux = EM28XX_AMUX_LINE_IN,
884 } },
885 },
886 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
887 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
888 .valid = EM28XX_BOARD_NOT_VALIDATED,
889 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
890 .tda9887_conf = TDA9887_PRESENT,
891 .decoder = EM28XX_SAA711X,
892 .input = { {
893 .type = EM28XX_VMUX_TELEVISION,
894 .vmux = SAA7115_COMPOSITE2,
895 .amux = EM28XX_AMUX_VIDEO,
896 }, {
897 .type = EM28XX_VMUX_COMPOSITE,
898 .vmux = SAA7115_COMPOSITE0,
899 .amux = EM28XX_AMUX_LINE_IN,
900 }, {
901 .type = EM28XX_VMUX_SVIDEO,
902 .vmux = SAA7115_SVIDEO3,
903 .amux = EM28XX_AMUX_LINE_IN,
904 } },
905 },
906 [EM2820_BOARD_GADMEI_UTV310] = {
907 .name = "Gadmei UTV310",
908 .valid = EM28XX_BOARD_NOT_VALIDATED,
909 .tuner_type = TUNER_TNF_5335MF,
910 .tda9887_conf = TDA9887_PRESENT,
911 .decoder = EM28XX_SAA711X,
912 .input = { {
913 .type = EM28XX_VMUX_TELEVISION,
914 .vmux = SAA7115_COMPOSITE1,
915 .amux = EM28XX_AMUX_LINE_IN,
916 }, {
917 .type = EM28XX_VMUX_COMPOSITE,
918 .vmux = SAA7115_COMPOSITE0,
919 .amux = EM28XX_AMUX_LINE_IN,
920 }, {
921 .type = EM28XX_VMUX_SVIDEO,
922 .vmux = SAA7115_SVIDEO3,
923 .amux = EM28XX_AMUX_LINE_IN,
924 } },
925 },
926 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
927 .name = "Leadtek Winfast USB II Deluxe",
928 .valid = EM28XX_BOARD_NOT_VALIDATED,
929 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
930 .has_ir_i2c = 1,
931 .tvaudio_addr = 0x58,
932 .tda9887_conf = TDA9887_PRESENT |
933 TDA9887_PORT2_ACTIVE |
934 TDA9887_QSS,
935 .decoder = EM28XX_SAA711X,
936 .adecoder = EM28XX_TVAUDIO,
937 .input = { {
938 .type = EM28XX_VMUX_TELEVISION,
939 .vmux = SAA7115_COMPOSITE4,
940 .amux = EM28XX_AMUX_AUX,
941 }, {
942 .type = EM28XX_VMUX_COMPOSITE,
943 .vmux = SAA7115_COMPOSITE5,
944 .amux = EM28XX_AMUX_LINE_IN,
945 }, {
946 .type = EM28XX_VMUX_SVIDEO,
947 .vmux = SAA7115_SVIDEO3,
948 .amux = EM28XX_AMUX_LINE_IN,
949 } },
950 .radio = {
951 .type = EM28XX_RADIO,
952 .amux = EM28XX_AMUX_AUX,
953 }
954 },
955 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
956 .name = "Videology 20K14XUSB USB2.0",
957 .valid = EM28XX_BOARD_NOT_VALIDATED,
958 .tuner_type = TUNER_ABSENT,
959 .is_webcam = 1,
960 .input = { {
961 .type = EM28XX_VMUX_COMPOSITE,
962 .vmux = 0,
963 .amux = EM28XX_AMUX_VIDEO,
964 } },
965 },
966 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
967 .name = "Silvercrest Webcam 1.3mpix",
968 .tuner_type = TUNER_ABSENT,
969 .is_webcam = 1,
970 .input = { {
971 .type = EM28XX_VMUX_COMPOSITE,
972 .vmux = 0,
973 .amux = EM28XX_AMUX_VIDEO,
974 .gpio = silvercrest_reg_seq,
975 } },
976 },
977 [EM2821_BOARD_SUPERCOMP_USB_2] = {
978 .name = "Supercomp USB 2.0 TV",
979 .valid = EM28XX_BOARD_NOT_VALIDATED,
980 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
981 .tda9887_conf = TDA9887_PRESENT |
982 TDA9887_PORT1_ACTIVE |
983 TDA9887_PORT2_ACTIVE,
984 .decoder = EM28XX_SAA711X,
985 .input = { {
986 .type = EM28XX_VMUX_TELEVISION,
987 .vmux = SAA7115_COMPOSITE2,
988 .amux = EM28XX_AMUX_LINE_IN,
989 }, {
990 .type = EM28XX_VMUX_COMPOSITE,
991 .vmux = SAA7115_COMPOSITE0,
992 .amux = EM28XX_AMUX_VIDEO,
993 }, {
994 .type = EM28XX_VMUX_SVIDEO,
995 .vmux = SAA7115_SVIDEO3,
996 .amux = EM28XX_AMUX_LINE_IN,
997 } },
998 },
999 [EM2821_BOARD_USBGEAR_VD204] = {
1000 .name = "Usbgear VD204v9",
1001 .valid = EM28XX_BOARD_NOT_VALIDATED,
1002 .tuner_type = TUNER_ABSENT, /* Capture only device */
1003 .decoder = EM28XX_SAA711X,
1004 .input = { {
1005 .type = EM28XX_VMUX_COMPOSITE,
1006 .vmux = SAA7115_COMPOSITE0,
1007 .amux = EM28XX_AMUX_LINE_IN,
1008 }, {
1009 .type = EM28XX_VMUX_SVIDEO,
1010 .vmux = SAA7115_SVIDEO3,
1011 .amux = EM28XX_AMUX_LINE_IN,
1012 } },
1013 },
1014 [EM2860_BOARD_NETGMBH_CAM] = {
1015 /* Beijing Huaqi Information Digital Technology Co., Ltd */
1016 .name = "NetGMBH Cam",
1017 .valid = EM28XX_BOARD_NOT_VALIDATED,
1018 .tuner_type = TUNER_ABSENT,
1019 .is_webcam = 1,
1020 .input = { {
1021 .type = EM28XX_VMUX_COMPOSITE,
1022 .vmux = 0,
1023 .amux = EM28XX_AMUX_VIDEO,
1024 } },
1025 },
1026 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
1027 .name = "Typhoon DVD Maker",
1028 .decoder = EM28XX_SAA711X,
1029 .tuner_type = TUNER_ABSENT, /* Capture only device */
1030 .input = { {
1031 .type = EM28XX_VMUX_COMPOSITE,
1032 .vmux = SAA7115_COMPOSITE0,
1033 .amux = EM28XX_AMUX_LINE_IN,
1034 }, {
1035 .type = EM28XX_VMUX_SVIDEO,
1036 .vmux = SAA7115_SVIDEO3,
1037 .amux = EM28XX_AMUX_LINE_IN,
1038 } },
1039 },
1040 [EM2860_BOARD_GADMEI_UTV330] = {
1041 .name = "Gadmei UTV330",
1042 .valid = EM28XX_BOARD_NOT_VALIDATED,
1043 .tuner_type = TUNER_TNF_5335MF,
1044 .tda9887_conf = TDA9887_PRESENT,
1045 .decoder = EM28XX_SAA711X,
1046 .input = { {
1047 .type = EM28XX_VMUX_TELEVISION,
1048 .vmux = SAA7115_COMPOSITE2,
1049 .amux = EM28XX_AMUX_VIDEO,
1050 }, {
1051 .type = EM28XX_VMUX_COMPOSITE,
1052 .vmux = SAA7115_COMPOSITE0,
1053 .amux = EM28XX_AMUX_LINE_IN,
1054 }, {
1055 .type = EM28XX_VMUX_SVIDEO,
1056 .vmux = SAA7115_SVIDEO3,
1057 .amux = EM28XX_AMUX_LINE_IN,
1058 } },
1059 },
1060 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
1061 .name = "Gadmei UTV330+",
1062 .tuner_type = TUNER_TNF_5335MF,
1063 .tda9887_conf = TDA9887_PRESENT,
1064 .ir_codes = RC_MAP_GADMEI_RM008Z,
1065 .decoder = EM28XX_SAA711X,
1066 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1067 .input = { {
1068 .type = EM28XX_VMUX_TELEVISION,
1069 .vmux = SAA7115_COMPOSITE2,
1070 .amux = EM28XX_AMUX_VIDEO,
1071 }, {
1072 .type = EM28XX_VMUX_COMPOSITE,
1073 .vmux = SAA7115_COMPOSITE0,
1074 .amux = EM28XX_AMUX_LINE_IN,
1075 }, {
1076 .type = EM28XX_VMUX_SVIDEO,
1077 .vmux = SAA7115_SVIDEO3,
1078 .amux = EM28XX_AMUX_LINE_IN,
1079 } },
1080 },
1081 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
1082 .name = "Terratec Cinergy A Hybrid XS",
1083 .valid = EM28XX_BOARD_NOT_VALIDATED,
1084 .tuner_type = TUNER_XC2028,
1085 .tuner_gpio = default_tuner_gpio,
1086 .decoder = EM28XX_TVP5150,
1087
1088 .input = { {
1089 .type = EM28XX_VMUX_TELEVISION,
1090 .vmux = TVP5150_COMPOSITE0,
1091 .amux = EM28XX_AMUX_VIDEO,
1092 .gpio = hauppauge_wintv_hvr_900_analog,
1093 }, {
1094 .type = EM28XX_VMUX_COMPOSITE,
1095 .vmux = TVP5150_COMPOSITE1,
1096 .amux = EM28XX_AMUX_LINE_IN,
1097 .gpio = hauppauge_wintv_hvr_900_analog,
1098 }, {
1099 .type = EM28XX_VMUX_SVIDEO,
1100 .vmux = TVP5150_SVIDEO,
1101 .amux = EM28XX_AMUX_LINE_IN,
1102 .gpio = hauppauge_wintv_hvr_900_analog,
1103 } },
1104 },
1105 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
1106 .name = "KWorld PVRTV 300U",
1107 .valid = EM28XX_BOARD_NOT_VALIDATED,
1108 .tuner_type = TUNER_XC2028,
1109 .tuner_gpio = default_tuner_gpio,
1110 .decoder = EM28XX_TVP5150,
1111 .input = { {
1112 .type = EM28XX_VMUX_TELEVISION,
1113 .vmux = TVP5150_COMPOSITE0,
1114 .amux = EM28XX_AMUX_VIDEO,
1115 }, {
1116 .type = EM28XX_VMUX_COMPOSITE,
1117 .vmux = TVP5150_COMPOSITE1,
1118 .amux = EM28XX_AMUX_LINE_IN,
1119 }, {
1120 .type = EM28XX_VMUX_SVIDEO,
1121 .vmux = TVP5150_SVIDEO,
1122 .amux = EM28XX_AMUX_LINE_IN,
1123 } },
1124 },
1125 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
1126 .name = "Yakumo MovieMixer",
1127 .tuner_type = TUNER_ABSENT, /* Capture only device */
1128 .decoder = EM28XX_TVP5150,
1129 .input = { {
1130 .type = EM28XX_VMUX_TELEVISION,
1131 .vmux = TVP5150_COMPOSITE0,
1132 .amux = EM28XX_AMUX_VIDEO,
1133 }, {
1134 .type = EM28XX_VMUX_COMPOSITE,
1135 .vmux = TVP5150_COMPOSITE1,
1136 .amux = EM28XX_AMUX_LINE_IN,
1137 }, {
1138 .type = EM28XX_VMUX_SVIDEO,
1139 .vmux = TVP5150_SVIDEO,
1140 .amux = EM28XX_AMUX_LINE_IN,
1141 } },
1142 },
1143 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
1144 .name = "EM2860/TVP5150 Reference Design",
1145 .tuner_type = TUNER_ABSENT, /* Capture only device */
1146 .decoder = EM28XX_TVP5150,
1147 .input = { {
1148 .type = EM28XX_VMUX_COMPOSITE,
1149 .vmux = TVP5150_COMPOSITE1,
1150 .amux = EM28XX_AMUX_LINE_IN,
1151 }, {
1152 .type = EM28XX_VMUX_SVIDEO,
1153 .vmux = TVP5150_SVIDEO,
1154 .amux = EM28XX_AMUX_LINE_IN,
1155 } },
1156 },
1157 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
1158 .name = "Plextor ConvertX PX-TV100U",
1159 .tuner_type = TUNER_TNF_5335MF,
1160 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
1161 EM28XX_XCLK_FREQUENCY_12MHZ,
1162 .tda9887_conf = TDA9887_PRESENT,
1163 .decoder = EM28XX_TVP5150,
1164 .has_msp34xx = 1,
1165 .input = { {
1166 .type = EM28XX_VMUX_TELEVISION,
1167 .vmux = TVP5150_COMPOSITE0,
1168 .amux = EM28XX_AMUX_LINE_IN,
1169 .gpio = pinnacle_hybrid_pro_analog,
1170 }, {
1171 .type = EM28XX_VMUX_COMPOSITE,
1172 .vmux = TVP5150_COMPOSITE1,
1173 .amux = EM28XX_AMUX_LINE_IN,
1174 .gpio = pinnacle_hybrid_pro_analog,
1175 }, {
1176 .type = EM28XX_VMUX_SVIDEO,
1177 .vmux = TVP5150_SVIDEO,
1178 .amux = EM28XX_AMUX_LINE_IN,
1179 .gpio = pinnacle_hybrid_pro_analog,
1180 } },
1181 },
1182
1183 /* Those boards with em2870 are DVB Only*/
1184
1185 [EM2870_BOARD_TERRATEC_XS] = {
1186 .name = "Terratec Cinergy T XS",
1187 .valid = EM28XX_BOARD_NOT_VALIDATED,
1188 .tuner_type = TUNER_XC2028,
1189 .tuner_gpio = default_tuner_gpio,
1190 },
1191 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
1192 .name = "Terratec Cinergy T XS (MT2060)",
1193 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1194 EM28XX_XCLK_FREQUENCY_12MHZ,
1195 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1196 .tuner_type = TUNER_ABSENT, /* MT2060 */
1197 .has_dvb = 1,
1198 .tuner_gpio = default_tuner_gpio,
1199 },
1200 [EM2870_BOARD_KWORLD_350U] = {
1201 .name = "Kworld 350 U DVB-T",
1202 .valid = EM28XX_BOARD_NOT_VALIDATED,
1203 .tuner_type = TUNER_XC2028,
1204 .tuner_gpio = default_tuner_gpio,
1205 },
1206 [EM2870_BOARD_KWORLD_355U] = {
1207 .name = "Kworld 355 U DVB-T",
1208 .valid = EM28XX_BOARD_NOT_VALIDATED,
1209 .tuner_type = TUNER_ABSENT,
1210 .tuner_gpio = default_tuner_gpio,
1211 .has_dvb = 1,
1212 .dvb_gpio = default_digital,
1213 },
1214 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
1215 .name = "Pinnacle PCTV DVB-T",
1216 .valid = EM28XX_BOARD_NOT_VALIDATED,
1217 .tuner_type = TUNER_ABSENT, /* MT2060 */
1218 /* djh - I have serious doubts this is right... */
1219 .xclk = EM28XX_XCLK_IR_RC5_MODE |
1220 EM28XX_XCLK_FREQUENCY_10MHZ,
1221 },
1222 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
1223 .name = "Compro, VideoMate U3",
1224 .valid = EM28XX_BOARD_NOT_VALIDATED,
1225 .tuner_type = TUNER_ABSENT, /* MT2060 */
1226 },
1227
1228 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
1229 .name = "Terratec Hybrid XS Secam",
1230 .has_msp34xx = 1,
1231 .tuner_type = TUNER_XC2028,
1232 .tuner_gpio = default_tuner_gpio,
1233 .decoder = EM28XX_TVP5150,
1234 .has_dvb = 1,
1235 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
1236 .input = { {
1237 .type = EM28XX_VMUX_TELEVISION,
1238 .vmux = TVP5150_COMPOSITE0,
1239 .amux = EM28XX_AMUX_VIDEO,
1240 .gpio = terratec_cinergy_USB_XS_FR_analog,
1241 }, {
1242 .type = EM28XX_VMUX_COMPOSITE,
1243 .vmux = TVP5150_COMPOSITE1,
1244 .amux = EM28XX_AMUX_LINE_IN,
1245 .gpio = terratec_cinergy_USB_XS_FR_analog,
1246 }, {
1247 .type = EM28XX_VMUX_SVIDEO,
1248 .vmux = TVP5150_SVIDEO,
1249 .amux = EM28XX_AMUX_LINE_IN,
1250 .gpio = terratec_cinergy_USB_XS_FR_analog,
1251 } },
1252 },
1253 [EM2884_BOARD_TERRATEC_H5] = {
1254 .name = "Terratec Cinergy H5",
1255 .has_dvb = 1,
1256 #if 0
1257 .tuner_type = TUNER_PHILIPS_TDA8290,
1258 .tuner_addr = 0x41,
1259 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1260 .tuner_gpio = terratec_h5_gpio,
1261 #else
1262 .tuner_type = TUNER_ABSENT,
1263 #endif
1264 .def_i2c_bus = 1,
1265 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1266 EM28XX_I2C_FREQ_400_KHZ,
1267 },
1268 [EM2884_BOARD_TERRATEC_H6] = {
1269 .name = "Terratec Cinergy H6 rev. 2",
1270 .has_dvb = 1,
1271 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1272 #if 0
1273 .tuner_type = TUNER_PHILIPS_TDA8290,
1274 .tuner_addr = 0x41,
1275 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */
1276 .tuner_gpio = terratec_h5_gpio,
1277 #else
1278 .tuner_type = TUNER_ABSENT,
1279 #endif
1280 .def_i2c_bus = 1,
1281 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1282 EM28XX_I2C_FREQ_400_KHZ,
1283 },
1284 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = {
1285 .name = "Hauppauge WinTV HVR 930C",
1286 .has_dvb = 1,
1287 #if 0 /* FIXME: Add analog support */
1288 .tuner_type = TUNER_XC5000,
1289 .tuner_addr = 0x41,
1290 .dvb_gpio = hauppauge_930c_digital,
1291 .tuner_gpio = hauppauge_930c_gpio,
1292 #else
1293 .tuner_type = TUNER_ABSENT,
1294 #endif
1295 .ir_codes = RC_MAP_HAUPPAUGE,
1296 .def_i2c_bus = 1,
1297 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1298 EM28XX_I2C_FREQ_400_KHZ,
1299 },
1300 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = {
1301 .name = "C3 Tech Digital Duo HDTV/SDTV USB",
1302 .has_dvb = 1,
1303 /* FIXME: Add analog support - need a saa7136 driver */
1304 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1305 .ir_codes = RC_MAP_EMPTY,
1306 .def_i2c_bus = 1,
1307 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1308 .dvb_gpio = c3tech_digital_duo_digital,
1309 },
1310 [EM2884_BOARD_CINERGY_HTC_STICK] = {
1311 .name = "Terratec Cinergy HTC Stick",
1312 .has_dvb = 1,
1313 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1314 .tuner_type = TUNER_ABSENT,
1315 .def_i2c_bus = 1,
1316 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1317 EM28XX_I2C_FREQ_400_KHZ,
1318 },
1319 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = {
1320 .name = "Elgato EyeTV Hybrid 2008 INT",
1321 .has_dvb = 1,
1322 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
1323 .tuner_type = TUNER_ABSENT,
1324 .def_i2c_bus = 1,
1325 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1326 EM28XX_I2C_FREQ_400_KHZ,
1327 },
1328 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
1329 .name = "Hauppauge WinTV HVR 900",
1330 .tda9887_conf = TDA9887_PRESENT,
1331 .tuner_type = TUNER_XC2028,
1332 .tuner_gpio = default_tuner_gpio,
1333 .mts_firmware = 1,
1334 .has_dvb = 1,
1335 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1336 .ir_codes = RC_MAP_HAUPPAUGE,
1337 .decoder = EM28XX_TVP5150,
1338 .input = { {
1339 .type = EM28XX_VMUX_TELEVISION,
1340 .vmux = TVP5150_COMPOSITE0,
1341 .amux = EM28XX_AMUX_VIDEO,
1342 .gpio = hauppauge_wintv_hvr_900_analog,
1343 }, {
1344 .type = EM28XX_VMUX_COMPOSITE,
1345 .vmux = TVP5150_COMPOSITE1,
1346 .amux = EM28XX_AMUX_LINE_IN,
1347 .gpio = hauppauge_wintv_hvr_900_analog,
1348 }, {
1349 .type = EM28XX_VMUX_SVIDEO,
1350 .vmux = TVP5150_SVIDEO,
1351 .amux = EM28XX_AMUX_LINE_IN,
1352 .gpio = hauppauge_wintv_hvr_900_analog,
1353 } },
1354 },
1355 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
1356 .name = "Hauppauge WinTV HVR 900 (R2)",
1357 .tda9887_conf = TDA9887_PRESENT,
1358 .tuner_type = TUNER_XC2028,
1359 .tuner_gpio = default_tuner_gpio,
1360 .mts_firmware = 1,
1361 .has_dvb = 1,
1362 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1363 .ir_codes = RC_MAP_HAUPPAUGE,
1364 .decoder = EM28XX_TVP5150,
1365 .input = { {
1366 .type = EM28XX_VMUX_TELEVISION,
1367 .vmux = TVP5150_COMPOSITE0,
1368 .amux = EM28XX_AMUX_VIDEO,
1369 .gpio = hauppauge_wintv_hvr_900_analog,
1370 }, {
1371 .type = EM28XX_VMUX_COMPOSITE,
1372 .vmux = TVP5150_COMPOSITE1,
1373 .amux = EM28XX_AMUX_LINE_IN,
1374 .gpio = hauppauge_wintv_hvr_900_analog,
1375 }, {
1376 .type = EM28XX_VMUX_SVIDEO,
1377 .vmux = TVP5150_SVIDEO,
1378 .amux = EM28XX_AMUX_LINE_IN,
1379 .gpio = hauppauge_wintv_hvr_900_analog,
1380 } },
1381 },
1382 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
1383 .name = "Hauppauge WinTV HVR 850",
1384 .tuner_type = TUNER_XC2028,
1385 .tuner_gpio = default_tuner_gpio,
1386 .mts_firmware = 1,
1387 .has_dvb = 1,
1388 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1389 .ir_codes = RC_MAP_HAUPPAUGE,
1390 .decoder = EM28XX_TVP5150,
1391 .input = { {
1392 .type = EM28XX_VMUX_TELEVISION,
1393 .vmux = TVP5150_COMPOSITE0,
1394 .amux = EM28XX_AMUX_VIDEO,
1395 .gpio = hauppauge_wintv_hvr_900_analog,
1396 }, {
1397 .type = EM28XX_VMUX_COMPOSITE,
1398 .vmux = TVP5150_COMPOSITE1,
1399 .amux = EM28XX_AMUX_LINE_IN,
1400 .gpio = hauppauge_wintv_hvr_900_analog,
1401 }, {
1402 .type = EM28XX_VMUX_SVIDEO,
1403 .vmux = TVP5150_SVIDEO,
1404 .amux = EM28XX_AMUX_LINE_IN,
1405 .gpio = hauppauge_wintv_hvr_900_analog,
1406 } },
1407 },
1408 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
1409 .name = "Hauppauge WinTV HVR 950",
1410 .tuner_type = TUNER_XC2028,
1411 .tuner_gpio = default_tuner_gpio,
1412 .mts_firmware = 1,
1413 .has_dvb = 1,
1414 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1415 .ir_codes = RC_MAP_HAUPPAUGE,
1416 .decoder = EM28XX_TVP5150,
1417 .input = { {
1418 .type = EM28XX_VMUX_TELEVISION,
1419 .vmux = TVP5150_COMPOSITE0,
1420 .amux = EM28XX_AMUX_VIDEO,
1421 .gpio = hauppauge_wintv_hvr_900_analog,
1422 }, {
1423 .type = EM28XX_VMUX_COMPOSITE,
1424 .vmux = TVP5150_COMPOSITE1,
1425 .amux = EM28XX_AMUX_LINE_IN,
1426 .gpio = hauppauge_wintv_hvr_900_analog,
1427 }, {
1428 .type = EM28XX_VMUX_SVIDEO,
1429 .vmux = TVP5150_SVIDEO,
1430 .amux = EM28XX_AMUX_LINE_IN,
1431 .gpio = hauppauge_wintv_hvr_900_analog,
1432 } },
1433 },
1434 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
1435 .name = "Pinnacle PCTV HD Pro Stick",
1436 .tuner_type = TUNER_XC2028,
1437 .tuner_gpio = default_tuner_gpio,
1438 .mts_firmware = 1,
1439 .has_dvb = 1,
1440 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1441 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1442 .decoder = EM28XX_TVP5150,
1443 .input = { {
1444 .type = EM28XX_VMUX_TELEVISION,
1445 .vmux = TVP5150_COMPOSITE0,
1446 .amux = EM28XX_AMUX_VIDEO,
1447 .gpio = hauppauge_wintv_hvr_900_analog,
1448 }, {
1449 .type = EM28XX_VMUX_COMPOSITE,
1450 .vmux = TVP5150_COMPOSITE1,
1451 .amux = EM28XX_AMUX_LINE_IN,
1452 .gpio = hauppauge_wintv_hvr_900_analog,
1453 }, {
1454 .type = EM28XX_VMUX_SVIDEO,
1455 .vmux = TVP5150_SVIDEO,
1456 .amux = EM28XX_AMUX_LINE_IN,
1457 .gpio = hauppauge_wintv_hvr_900_analog,
1458 } },
1459 },
1460 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
1461 .name = "AMD ATI TV Wonder HD 600",
1462 .tuner_type = TUNER_XC2028,
1463 .tuner_gpio = default_tuner_gpio,
1464 .mts_firmware = 1,
1465 .has_dvb = 1,
1466 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1467 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
1468 .decoder = EM28XX_TVP5150,
1469 .input = { {
1470 .type = EM28XX_VMUX_TELEVISION,
1471 .vmux = TVP5150_COMPOSITE0,
1472 .amux = EM28XX_AMUX_VIDEO,
1473 .gpio = hauppauge_wintv_hvr_900_analog,
1474 }, {
1475 .type = EM28XX_VMUX_COMPOSITE,
1476 .vmux = TVP5150_COMPOSITE1,
1477 .amux = EM28XX_AMUX_LINE_IN,
1478 .gpio = hauppauge_wintv_hvr_900_analog,
1479 }, {
1480 .type = EM28XX_VMUX_SVIDEO,
1481 .vmux = TVP5150_SVIDEO,
1482 .amux = EM28XX_AMUX_LINE_IN,
1483 .gpio = hauppauge_wintv_hvr_900_analog,
1484 } },
1485 },
1486 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
1487 .name = "Terratec Hybrid XS",
1488 .tuner_type = TUNER_XC2028,
1489 .tuner_gpio = default_tuner_gpio,
1490 .decoder = EM28XX_TVP5150,
1491 .has_dvb = 1,
1492 .dvb_gpio = default_digital,
1493 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1494 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1495 .input = { {
1496 .type = EM28XX_VMUX_TELEVISION,
1497 .vmux = TVP5150_COMPOSITE0,
1498 .amux = EM28XX_AMUX_VIDEO,
1499 .gpio = default_analog,
1500 }, {
1501 .type = EM28XX_VMUX_COMPOSITE,
1502 .vmux = TVP5150_COMPOSITE1,
1503 .amux = EM28XX_AMUX_LINE_IN,
1504 .gpio = default_analog,
1505 }, {
1506 .type = EM28XX_VMUX_SVIDEO,
1507 .vmux = TVP5150_SVIDEO,
1508 .amux = EM28XX_AMUX_LINE_IN,
1509 .gpio = default_analog,
1510 } },
1511 },
1512 /*
1513 * maybe there's a reason behind it why Terratec sells the Hybrid XS
1514 * as Prodigy XS with a different PID, let's keep it separated for now
1515 * maybe we'll need it later on
1516 */
1517 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1518 .name = "Terratec Prodigy XS",
1519 .tuner_type = TUNER_XC2028,
1520 .tuner_gpio = default_tuner_gpio,
1521 .decoder = EM28XX_TVP5150,
1522 .input = { {
1523 .type = EM28XX_VMUX_TELEVISION,
1524 .vmux = TVP5150_COMPOSITE0,
1525 .amux = EM28XX_AMUX_VIDEO,
1526 .gpio = hauppauge_wintv_hvr_900_analog,
1527 }, {
1528 .type = EM28XX_VMUX_COMPOSITE,
1529 .vmux = TVP5150_COMPOSITE1,
1530 .amux = EM28XX_AMUX_LINE_IN,
1531 .gpio = hauppauge_wintv_hvr_900_analog,
1532 }, {
1533 .type = EM28XX_VMUX_SVIDEO,
1534 .vmux = TVP5150_SVIDEO,
1535 .amux = EM28XX_AMUX_LINE_IN,
1536 .gpio = hauppauge_wintv_hvr_900_analog,
1537 } },
1538 },
1539 [EM2820_BOARD_MSI_VOX_USB_2] = {
1540 .name = "MSI VOX USB 2.0",
1541 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1542 .tda9887_conf = TDA9887_PRESENT |
1543 TDA9887_PORT1_ACTIVE |
1544 TDA9887_PORT2_ACTIVE,
1545 .max_range_640_480 = 1,
1546 .decoder = EM28XX_SAA711X,
1547 .input = { {
1548 .type = EM28XX_VMUX_TELEVISION,
1549 .vmux = SAA7115_COMPOSITE4,
1550 .amux = EM28XX_AMUX_VIDEO,
1551 }, {
1552 .type = EM28XX_VMUX_COMPOSITE,
1553 .vmux = SAA7115_COMPOSITE0,
1554 .amux = EM28XX_AMUX_LINE_IN,
1555 }, {
1556 .type = EM28XX_VMUX_SVIDEO,
1557 .vmux = SAA7115_SVIDEO3,
1558 .amux = EM28XX_AMUX_LINE_IN,
1559 } },
1560 },
1561 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1562 .name = "Terratec Cinergy 200 USB",
1563 .is_em2800 = 1,
1564 .has_ir_i2c = 1,
1565 .tuner_type = TUNER_LG_TALN,
1566 .tda9887_conf = TDA9887_PRESENT,
1567 .decoder = EM28XX_SAA711X,
1568 .input = { {
1569 .type = EM28XX_VMUX_TELEVISION,
1570 .vmux = SAA7115_COMPOSITE2,
1571 .amux = EM28XX_AMUX_VIDEO,
1572 }, {
1573 .type = EM28XX_VMUX_COMPOSITE,
1574 .vmux = SAA7115_COMPOSITE0,
1575 .amux = EM28XX_AMUX_LINE_IN,
1576 }, {
1577 .type = EM28XX_VMUX_SVIDEO,
1578 .vmux = SAA7115_SVIDEO3,
1579 .amux = EM28XX_AMUX_LINE_IN,
1580 } },
1581 },
1582 [EM2800_BOARD_GRABBEEX_USB2800] = {
1583 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1584 .is_em2800 = 1,
1585 .decoder = EM28XX_SAA711X,
1586 .tuner_type = TUNER_ABSENT, /* capture only board */
1587 .input = { {
1588 .type = EM28XX_VMUX_COMPOSITE,
1589 .vmux = SAA7115_COMPOSITE0,
1590 .amux = EM28XX_AMUX_LINE_IN,
1591 }, {
1592 .type = EM28XX_VMUX_SVIDEO,
1593 .vmux = SAA7115_SVIDEO3,
1594 .amux = EM28XX_AMUX_LINE_IN,
1595 } },
1596 },
1597 [EM2800_BOARD_VC211A] = {
1598 .name = "Actionmaster/LinXcel/Digitus VC211A",
1599 .is_em2800 = 1,
1600 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1601 .decoder = EM28XX_SAA711X,
1602 .input = { {
1603 .type = EM28XX_VMUX_COMPOSITE,
1604 .vmux = SAA7115_COMPOSITE0,
1605 .amux = EM28XX_AMUX_LINE_IN,
1606 .gpio = vc211a_enable,
1607 }, {
1608 .type = EM28XX_VMUX_SVIDEO,
1609 .vmux = SAA7115_SVIDEO3,
1610 .amux = EM28XX_AMUX_LINE_IN,
1611 .gpio = vc211a_enable,
1612 } },
1613 },
1614 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1615 .name = "Leadtek Winfast USB II",
1616 .is_em2800 = 1,
1617 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1618 .tda9887_conf = TDA9887_PRESENT,
1619 .decoder = EM28XX_SAA711X,
1620 .input = { {
1621 .type = EM28XX_VMUX_TELEVISION,
1622 .vmux = SAA7115_COMPOSITE2,
1623 .amux = EM28XX_AMUX_VIDEO,
1624 }, {
1625 .type = EM28XX_VMUX_COMPOSITE,
1626 .vmux = SAA7115_COMPOSITE0,
1627 .amux = EM28XX_AMUX_LINE_IN,
1628 }, {
1629 .type = EM28XX_VMUX_SVIDEO,
1630 .vmux = SAA7115_SVIDEO3,
1631 .amux = EM28XX_AMUX_LINE_IN,
1632 } },
1633 },
1634 [EM2800_BOARD_KWORLD_USB2800] = {
1635 .name = "Kworld USB2800",
1636 .is_em2800 = 1,
1637 .tuner_type = TUNER_PHILIPS_FCV1236D,
1638 .tda9887_conf = TDA9887_PRESENT,
1639 .decoder = EM28XX_SAA711X,
1640 .input = { {
1641 .type = EM28XX_VMUX_TELEVISION,
1642 .vmux = SAA7115_COMPOSITE2,
1643 .amux = EM28XX_AMUX_VIDEO,
1644 }, {
1645 .type = EM28XX_VMUX_COMPOSITE,
1646 .vmux = SAA7115_COMPOSITE0,
1647 .amux = EM28XX_AMUX_LINE_IN,
1648 }, {
1649 .type = EM28XX_VMUX_SVIDEO,
1650 .vmux = SAA7115_SVIDEO3,
1651 .amux = EM28XX_AMUX_LINE_IN,
1652 } },
1653 },
1654 [EM2820_BOARD_PINNACLE_DVC_90] = {
1655 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U",
1656 .tuner_type = TUNER_ABSENT, /* capture only board */
1657 .decoder = EM28XX_SAA711X,
1658 .input = { {
1659 .type = EM28XX_VMUX_COMPOSITE,
1660 .vmux = SAA7115_COMPOSITE0,
1661 .amux = EM28XX_AMUX_LINE_IN,
1662 }, {
1663 .type = EM28XX_VMUX_SVIDEO,
1664 .vmux = SAA7115_SVIDEO3,
1665 .amux = EM28XX_AMUX_LINE_IN,
1666 } },
1667 },
1668 [EM2800_BOARD_VGEAR_POCKETTV] = {
1669 .name = "V-Gear PocketTV",
1670 .is_em2800 = 1,
1671 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1672 .tda9887_conf = TDA9887_PRESENT,
1673 .decoder = EM28XX_SAA711X,
1674 .input = { {
1675 .type = EM28XX_VMUX_TELEVISION,
1676 .vmux = SAA7115_COMPOSITE2,
1677 .amux = EM28XX_AMUX_VIDEO,
1678 }, {
1679 .type = EM28XX_VMUX_COMPOSITE,
1680 .vmux = SAA7115_COMPOSITE0,
1681 .amux = EM28XX_AMUX_LINE_IN,
1682 }, {
1683 .type = EM28XX_VMUX_SVIDEO,
1684 .vmux = SAA7115_SVIDEO3,
1685 .amux = EM28XX_AMUX_LINE_IN,
1686 } },
1687 },
1688 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1689 .name = "Pixelview PlayTV Box 4 USB 2.0",
1690 .tda9887_conf = TDA9887_PRESENT,
1691 .tuner_type = TUNER_YMEC_TVF_5533MF,
1692 .decoder = EM28XX_SAA711X,
1693 .input = { {
1694 .type = EM28XX_VMUX_TELEVISION,
1695 .vmux = SAA7115_COMPOSITE2,
1696 .amux = EM28XX_AMUX_VIDEO,
1697 .aout = EM28XX_AOUT_MONO | /* I2S */
1698 EM28XX_AOUT_MASTER, /* Line out pin */
1699 }, {
1700 .type = EM28XX_VMUX_COMPOSITE,
1701 .vmux = SAA7115_COMPOSITE0,
1702 .amux = EM28XX_AMUX_LINE_IN,
1703 }, {
1704 .type = EM28XX_VMUX_SVIDEO,
1705 .vmux = SAA7115_SVIDEO3,
1706 .amux = EM28XX_AMUX_LINE_IN,
1707 } },
1708 },
1709 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1710 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1711 .buttons = std_snapshot_button,
1712 .tda9887_conf = TDA9887_PRESENT,
1713 .tuner_type = TUNER_YMEC_TVF_5533MF,
1714 .tuner_addr = 0x60,
1715 .decoder = EM28XX_SAA711X,
1716 .input = { {
1717 .type = EM28XX_VMUX_TELEVISION,
1718 .vmux = SAA7115_COMPOSITE2,
1719 .amux = EM28XX_AMUX_VIDEO,
1720 .aout = EM28XX_AOUT_MONO | /* I2S */
1721 EM28XX_AOUT_MASTER, /* Line out pin */
1722 }, {
1723 .type = EM28XX_VMUX_COMPOSITE,
1724 .vmux = SAA7115_COMPOSITE0,
1725 .amux = EM28XX_AMUX_LINE_IN,
1726 }, {
1727 .type = EM28XX_VMUX_SVIDEO,
1728 .vmux = SAA7115_SVIDEO3,
1729 .amux = EM28XX_AMUX_LINE_IN,
1730 } },
1731 },
1732 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1733 .name = "EM2860/SAA711X Reference Design",
1734 .buttons = std_snapshot_button,
1735 .tuner_type = TUNER_ABSENT,
1736 .decoder = EM28XX_SAA711X,
1737 .input = { {
1738 .type = EM28XX_VMUX_SVIDEO,
1739 .vmux = SAA7115_SVIDEO3,
1740 }, {
1741 .type = EM28XX_VMUX_COMPOSITE,
1742 .vmux = SAA7115_COMPOSITE0,
1743 } },
1744 },
1745
1746 [EM2874_BOARD_LEADERSHIP_ISDBT] = {
1747 .def_i2c_bus = 1,
1748 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1749 EM28XX_I2C_FREQ_100_KHZ,
1750 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1751 .name = "EM2874 Leadership ISDBT",
1752 .tuner_type = TUNER_ABSENT,
1753 .tuner_gpio = leadership_reset,
1754 .dvb_gpio = leadership_digital,
1755 .has_dvb = 1,
1756 },
1757
1758 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1759 .name = "MSI DigiVox A/D",
1760 .valid = EM28XX_BOARD_NOT_VALIDATED,
1761 .tuner_type = TUNER_XC2028,
1762 .tuner_gpio = default_tuner_gpio,
1763 .decoder = EM28XX_TVP5150,
1764 .input = { {
1765 .type = EM28XX_VMUX_TELEVISION,
1766 .vmux = TVP5150_COMPOSITE0,
1767 .amux = EM28XX_AMUX_VIDEO,
1768 .gpio = em2880_msi_digivox_ad_analog,
1769 }, {
1770 .type = EM28XX_VMUX_COMPOSITE,
1771 .vmux = TVP5150_COMPOSITE1,
1772 .amux = EM28XX_AMUX_LINE_IN,
1773 .gpio = em2880_msi_digivox_ad_analog,
1774 }, {
1775 .type = EM28XX_VMUX_SVIDEO,
1776 .vmux = TVP5150_SVIDEO,
1777 .amux = EM28XX_AMUX_LINE_IN,
1778 .gpio = em2880_msi_digivox_ad_analog,
1779 } },
1780 },
1781 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1782 .name = "MSI DigiVox A/D II",
1783 .valid = EM28XX_BOARD_NOT_VALIDATED,
1784 .tuner_type = TUNER_XC2028,
1785 .tuner_gpio = default_tuner_gpio,
1786 .decoder = EM28XX_TVP5150,
1787 .input = { {
1788 .type = EM28XX_VMUX_TELEVISION,
1789 .vmux = TVP5150_COMPOSITE0,
1790 .amux = EM28XX_AMUX_VIDEO,
1791 .gpio = em2880_msi_digivox_ad_analog,
1792 }, {
1793 .type = EM28XX_VMUX_COMPOSITE,
1794 .vmux = TVP5150_COMPOSITE1,
1795 .amux = EM28XX_AMUX_LINE_IN,
1796 .gpio = em2880_msi_digivox_ad_analog,
1797 }, {
1798 .type = EM28XX_VMUX_SVIDEO,
1799 .vmux = TVP5150_SVIDEO,
1800 .amux = EM28XX_AMUX_LINE_IN,
1801 .gpio = em2880_msi_digivox_ad_analog,
1802 } },
1803 },
1804 [EM2880_BOARD_KWORLD_DVB_305U] = {
1805 .name = "KWorld DVB-T 305U",
1806 .tuner_type = TUNER_XC2028,
1807 .tuner_gpio = default_tuner_gpio,
1808 .decoder = EM28XX_TVP5150,
1809 .input = { {
1810 .type = EM28XX_VMUX_TELEVISION,
1811 .vmux = TVP5150_COMPOSITE0,
1812 .amux = EM28XX_AMUX_VIDEO,
1813 }, {
1814 .type = EM28XX_VMUX_COMPOSITE,
1815 .vmux = TVP5150_COMPOSITE1,
1816 .amux = EM28XX_AMUX_LINE_IN,
1817 }, {
1818 .type = EM28XX_VMUX_SVIDEO,
1819 .vmux = TVP5150_SVIDEO,
1820 .amux = EM28XX_AMUX_LINE_IN,
1821 } },
1822 },
1823 [EM2880_BOARD_KWORLD_DVB_310U] = {
1824 .name = "KWorld DVB-T 310U",
1825 .tuner_type = TUNER_XC2028,
1826 .tuner_gpio = default_tuner_gpio,
1827 .has_dvb = 1,
1828 .dvb_gpio = default_digital,
1829 .mts_firmware = 1,
1830 .decoder = EM28XX_TVP5150,
1831 .input = { {
1832 .type = EM28XX_VMUX_TELEVISION,
1833 .vmux = TVP5150_COMPOSITE0,
1834 .amux = EM28XX_AMUX_VIDEO,
1835 .gpio = default_analog,
1836 }, {
1837 .type = EM28XX_VMUX_COMPOSITE,
1838 .vmux = TVP5150_COMPOSITE1,
1839 .amux = EM28XX_AMUX_LINE_IN,
1840 .gpio = default_analog,
1841 }, { /* S-video has not been tested yet */
1842 .type = EM28XX_VMUX_SVIDEO,
1843 .vmux = TVP5150_SVIDEO,
1844 .amux = EM28XX_AMUX_LINE_IN,
1845 .gpio = default_analog,
1846 } },
1847 },
1848 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1849 .name = "KWorld ATSC 315U HDTV TV Box",
1850 .valid = EM28XX_BOARD_NOT_VALIDATED,
1851 .tuner_type = TUNER_THOMSON_DTT761X,
1852 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1853 .tda9887_conf = TDA9887_PRESENT,
1854 .decoder = EM28XX_SAA711X,
1855 .has_dvb = 1,
1856 .dvb_gpio = em2882_kworld_315u_digital,
1857 .ir_codes = RC_MAP_KWORLD_315U,
1858 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1859 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1860 #if 0
1861 /* FIXME: Analog mode - still not ready */
1862 .input = { {
1863 .type = EM28XX_VMUX_TELEVISION,
1864 .vmux = SAA7115_COMPOSITE2,
1865 .amux = EM28XX_AMUX_VIDEO,
1866 .gpio = em2882_kworld_315u_analog,
1867 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1868 }, {
1869 .type = EM28XX_VMUX_COMPOSITE,
1870 .vmux = SAA7115_COMPOSITE0,
1871 .amux = EM28XX_AMUX_LINE_IN,
1872 .gpio = em2882_kworld_315u_analog1,
1873 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1874 }, {
1875 .type = EM28XX_VMUX_SVIDEO,
1876 .vmux = SAA7115_SVIDEO3,
1877 .amux = EM28XX_AMUX_LINE_IN,
1878 .gpio = em2882_kworld_315u_analog1,
1879 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1880 } },
1881 #endif
1882 },
1883 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1884 .name = "Empire dual TV",
1885 .tuner_type = TUNER_XC2028,
1886 .tuner_gpio = default_tuner_gpio,
1887 .has_dvb = 1,
1888 .dvb_gpio = default_digital,
1889 .mts_firmware = 1,
1890 .decoder = EM28XX_TVP5150,
1891 .input = { {
1892 .type = EM28XX_VMUX_TELEVISION,
1893 .vmux = TVP5150_COMPOSITE0,
1894 .amux = EM28XX_AMUX_VIDEO,
1895 .gpio = default_analog,
1896 }, {
1897 .type = EM28XX_VMUX_COMPOSITE,
1898 .vmux = TVP5150_COMPOSITE1,
1899 .amux = EM28XX_AMUX_LINE_IN,
1900 .gpio = default_analog,
1901 }, {
1902 .type = EM28XX_VMUX_SVIDEO,
1903 .vmux = TVP5150_SVIDEO,
1904 .amux = EM28XX_AMUX_LINE_IN,
1905 .gpio = default_analog,
1906 } },
1907 },
1908 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1909 .name = "DNT DA2 Hybrid",
1910 .valid = EM28XX_BOARD_NOT_VALIDATED,
1911 .tuner_type = TUNER_XC2028,
1912 .tuner_gpio = default_tuner_gpio,
1913 .decoder = EM28XX_TVP5150,
1914 .input = { {
1915 .type = EM28XX_VMUX_TELEVISION,
1916 .vmux = TVP5150_COMPOSITE0,
1917 .amux = EM28XX_AMUX_VIDEO,
1918 .gpio = default_analog,
1919 }, {
1920 .type = EM28XX_VMUX_COMPOSITE,
1921 .vmux = TVP5150_COMPOSITE1,
1922 .amux = EM28XX_AMUX_LINE_IN,
1923 .gpio = default_analog,
1924 }, {
1925 .type = EM28XX_VMUX_SVIDEO,
1926 .vmux = TVP5150_SVIDEO,
1927 .amux = EM28XX_AMUX_LINE_IN,
1928 .gpio = default_analog,
1929 } },
1930 },
1931 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1932 .name = "Pinnacle Hybrid Pro",
1933 .tuner_type = TUNER_XC2028,
1934 .tuner_gpio = default_tuner_gpio,
1935 .decoder = EM28XX_TVP5150,
1936 .has_dvb = 1,
1937 .dvb_gpio = pinnacle_hybrid_pro_digital,
1938 .input = { {
1939 .type = EM28XX_VMUX_TELEVISION,
1940 .vmux = TVP5150_COMPOSITE0,
1941 .amux = EM28XX_AMUX_VIDEO,
1942 .gpio = pinnacle_hybrid_pro_analog,
1943 }, {
1944 .type = EM28XX_VMUX_COMPOSITE,
1945 .vmux = TVP5150_COMPOSITE1,
1946 .amux = EM28XX_AMUX_LINE_IN,
1947 .gpio = pinnacle_hybrid_pro_analog,
1948 }, {
1949 .type = EM28XX_VMUX_SVIDEO,
1950 .vmux = TVP5150_SVIDEO,
1951 .amux = EM28XX_AMUX_LINE_IN,
1952 .gpio = pinnacle_hybrid_pro_analog,
1953 } },
1954 },
1955 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = {
1956 .name = "Pinnacle Hybrid Pro (330e)",
1957 .tuner_type = TUNER_XC2028,
1958 .tuner_gpio = default_tuner_gpio,
1959 .mts_firmware = 1,
1960 .has_dvb = 1,
1961 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
1962 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
1963 .decoder = EM28XX_TVP5150,
1964 .input = { {
1965 .type = EM28XX_VMUX_TELEVISION,
1966 .vmux = TVP5150_COMPOSITE0,
1967 .amux = EM28XX_AMUX_VIDEO,
1968 .gpio = hauppauge_wintv_hvr_900_analog,
1969 }, {
1970 .type = EM28XX_VMUX_COMPOSITE,
1971 .vmux = TVP5150_COMPOSITE1,
1972 .amux = EM28XX_AMUX_LINE_IN,
1973 .gpio = hauppauge_wintv_hvr_900_analog,
1974 }, {
1975 .type = EM28XX_VMUX_SVIDEO,
1976 .vmux = TVP5150_SVIDEO,
1977 .amux = EM28XX_AMUX_LINE_IN,
1978 .gpio = hauppauge_wintv_hvr_900_analog,
1979 } },
1980 },
1981 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1982 .name = "Kworld VS-DVB-T 323UR",
1983 .tuner_type = TUNER_XC2028,
1984 .tuner_gpio = default_tuner_gpio,
1985 .decoder = EM28XX_TVP5150,
1986 .mts_firmware = 1,
1987 .has_dvb = 1,
1988 .dvb_gpio = kworld_330u_digital,
1989 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1990 .ir_codes = RC_MAP_KWORLD_315U,
1991 .input = { {
1992 .type = EM28XX_VMUX_TELEVISION,
1993 .vmux = TVP5150_COMPOSITE0,
1994 .amux = EM28XX_AMUX_VIDEO,
1995 }, {
1996 .type = EM28XX_VMUX_COMPOSITE,
1997 .vmux = TVP5150_COMPOSITE1,
1998 .amux = EM28XX_AMUX_LINE_IN,
1999 }, {
2000 .type = EM28XX_VMUX_SVIDEO,
2001 .vmux = TVP5150_SVIDEO,
2002 .amux = EM28XX_AMUX_LINE_IN,
2003 } },
2004 },
2005 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
2006 .name = "Terratec Cinergy Hybrid T USB XS (em2882)",
2007 .tuner_type = TUNER_XC2028,
2008 .tuner_gpio = default_tuner_gpio,
2009 .mts_firmware = 1,
2010 .decoder = EM28XX_TVP5150,
2011 .has_dvb = 1,
2012 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
2013 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
2014 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2015 .input = { {
2016 .type = EM28XX_VMUX_TELEVISION,
2017 .vmux = TVP5150_COMPOSITE0,
2018 .amux = EM28XX_AMUX_VIDEO,
2019 .gpio = hauppauge_wintv_hvr_900_analog,
2020 }, {
2021 .type = EM28XX_VMUX_COMPOSITE,
2022 .vmux = TVP5150_COMPOSITE1,
2023 .amux = EM28XX_AMUX_LINE_IN,
2024 .gpio = hauppauge_wintv_hvr_900_analog,
2025 }, {
2026 .type = EM28XX_VMUX_SVIDEO,
2027 .vmux = TVP5150_SVIDEO,
2028 .amux = EM28XX_AMUX_LINE_IN,
2029 .gpio = hauppauge_wintv_hvr_900_analog,
2030 } },
2031 },
2032 [EM2882_BOARD_DIKOM_DK300] = {
2033 .name = "Dikom DK300",
2034 .tuner_type = TUNER_XC2028,
2035 .tuner_gpio = default_tuner_gpio,
2036 .decoder = EM28XX_TVP5150,
2037 .mts_firmware = 1,
2038 .has_dvb = 1,
2039 .dvb_gpio = dikom_dk300_digital,
2040 .input = { {
2041 .type = EM28XX_VMUX_TELEVISION,
2042 .vmux = TVP5150_COMPOSITE0,
2043 .amux = EM28XX_AMUX_VIDEO,
2044 .gpio = default_analog,
2045 } },
2046 },
2047 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
2048 .name = "Kworld PlusTV HD Hybrid 330",
2049 .tuner_type = TUNER_XC2028,
2050 .tuner_gpio = default_tuner_gpio,
2051 .decoder = EM28XX_TVP5150,
2052 .mts_firmware = 1,
2053 .has_dvb = 1,
2054 .dvb_gpio = kworld_330u_digital,
2055 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2056 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2057 EM28XX_I2C_EEPROM_ON_BOARD |
2058 EM28XX_I2C_EEPROM_KEY_VALID,
2059 .input = { {
2060 .type = EM28XX_VMUX_TELEVISION,
2061 .vmux = TVP5150_COMPOSITE0,
2062 .amux = EM28XX_AMUX_VIDEO,
2063 .gpio = kworld_330u_analog,
2064 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
2065 }, {
2066 .type = EM28XX_VMUX_COMPOSITE,
2067 .vmux = TVP5150_COMPOSITE1,
2068 .amux = EM28XX_AMUX_LINE_IN,
2069 .gpio = kworld_330u_analog,
2070 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
2071 }, {
2072 .type = EM28XX_VMUX_SVIDEO,
2073 .vmux = TVP5150_SVIDEO,
2074 .amux = EM28XX_AMUX_LINE_IN,
2075 .gpio = kworld_330u_analog,
2076 } },
2077 },
2078 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
2079 .name = "Compro VideoMate ForYou/Stereo",
2080 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
2081 .tvaudio_addr = 0xb0,
2082 .tda9887_conf = TDA9887_PRESENT,
2083 .decoder = EM28XX_TVP5150,
2084 .adecoder = EM28XX_TVAUDIO,
2085 .mute_gpio = compro_mute_gpio,
2086 .input = { {
2087 .type = EM28XX_VMUX_TELEVISION,
2088 .vmux = TVP5150_COMPOSITE0,
2089 .amux = EM28XX_AMUX_VIDEO,
2090 .gpio = compro_unmute_tv_gpio,
2091 }, {
2092 .type = EM28XX_VMUX_SVIDEO,
2093 .vmux = TVP5150_SVIDEO,
2094 .amux = EM28XX_AMUX_LINE_IN,
2095 .gpio = compro_unmute_svid_gpio,
2096 } },
2097 },
2098 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
2099 .name = "Kaiomy TVnPC U2",
2100 .vchannels = 3,
2101 .tuner_type = TUNER_XC2028,
2102 .tuner_addr = 0x61,
2103 .mts_firmware = 1,
2104 .decoder = EM28XX_TVP5150,
2105 .tuner_gpio = default_tuner_gpio,
2106 .ir_codes = RC_MAP_KAIOMY,
2107 .input = { {
2108 .type = EM28XX_VMUX_TELEVISION,
2109 .vmux = TVP5150_COMPOSITE0,
2110 .amux = EM28XX_AMUX_VIDEO,
2111
2112 }, {
2113 .type = EM28XX_VMUX_COMPOSITE,
2114 .vmux = TVP5150_COMPOSITE1,
2115 .amux = EM28XX_AMUX_LINE_IN,
2116 }, {
2117 .type = EM28XX_VMUX_SVIDEO,
2118 .vmux = TVP5150_SVIDEO,
2119 .amux = EM28XX_AMUX_LINE_IN,
2120 } },
2121 .radio = {
2122 .type = EM28XX_RADIO,
2123 .amux = EM28XX_AMUX_LINE_IN,
2124 }
2125 },
2126 [EM2860_BOARD_EASYCAP] = {
2127 .name = "Easy Cap Capture DC-60",
2128 .vchannels = 2,
2129 .tuner_type = TUNER_ABSENT,
2130 .decoder = EM28XX_SAA711X,
2131 .input = { {
2132 .type = EM28XX_VMUX_COMPOSITE,
2133 .vmux = SAA7115_COMPOSITE0,
2134 .amux = EM28XX_AMUX_LINE_IN,
2135 }, {
2136 .type = EM28XX_VMUX_SVIDEO,
2137 .vmux = SAA7115_SVIDEO3,
2138 .amux = EM28XX_AMUX_LINE_IN,
2139 } },
2140 },
2141 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
2142 .name = "IO-DATA GV-MVP/SZ",
2143 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
2144 .tuner_gpio = default_tuner_gpio,
2145 .tda9887_conf = TDA9887_PRESENT,
2146 .decoder = EM28XX_TVP5150,
2147 .input = { {
2148 .type = EM28XX_VMUX_TELEVISION,
2149 .vmux = TVP5150_COMPOSITE0,
2150 .amux = EM28XX_AMUX_VIDEO,
2151 }, { /* Composite has not been tested yet */
2152 .type = EM28XX_VMUX_COMPOSITE,
2153 .vmux = TVP5150_COMPOSITE1,
2154 .amux = EM28XX_AMUX_VIDEO,
2155 }, { /* S-video has not been tested yet */
2156 .type = EM28XX_VMUX_SVIDEO,
2157 .vmux = TVP5150_SVIDEO,
2158 .amux = EM28XX_AMUX_VIDEO,
2159 } },
2160 },
2161 [EM2860_BOARD_TERRATEC_GRABBY] = {
2162 .name = "Terratec Grabby",
2163 .vchannels = 2,
2164 .tuner_type = TUNER_ABSENT,
2165 .decoder = EM28XX_SAA711X,
2166 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2167 .input = { {
2168 .type = EM28XX_VMUX_COMPOSITE,
2169 .vmux = SAA7115_COMPOSITE0,
2170 .amux = EM28XX_AMUX_LINE_IN,
2171 }, {
2172 .type = EM28XX_VMUX_SVIDEO,
2173 .vmux = SAA7115_SVIDEO3,
2174 .amux = EM28XX_AMUX_LINE_IN,
2175 } },
2176 .buttons = std_snapshot_button,
2177 .leds = terratec_grabby_leds,
2178 },
2179 [EM2860_BOARD_TERRATEC_AV350] = {
2180 .name = "Terratec AV350",
2181 .vchannels = 2,
2182 .tuner_type = TUNER_ABSENT,
2183 .decoder = EM28XX_TVP5150,
2184 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
2185 .mute_gpio = terratec_av350_mute_gpio,
2186 .input = { {
2187 .type = EM28XX_VMUX_COMPOSITE,
2188 .vmux = TVP5150_COMPOSITE1,
2189 .amux = EM28XX_AMUX_LINE_IN,
2190 .gpio = terratec_av350_unmute_gpio,
2191
2192 }, {
2193 .type = EM28XX_VMUX_SVIDEO,
2194 .vmux = TVP5150_SVIDEO,
2195 .amux = EM28XX_AMUX_LINE_IN,
2196 .gpio = terratec_av350_unmute_gpio,
2197 } },
2198 },
2199
2200 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
2201 .name = "Elgato Video Capture",
2202 .decoder = EM28XX_SAA711X,
2203 .tuner_type = TUNER_ABSENT, /* Capture only device */
2204 .input = { {
2205 .type = EM28XX_VMUX_COMPOSITE,
2206 .vmux = SAA7115_COMPOSITE0,
2207 .amux = EM28XX_AMUX_LINE_IN,
2208 }, {
2209 .type = EM28XX_VMUX_SVIDEO,
2210 .vmux = SAA7115_SVIDEO3,
2211 .amux = EM28XX_AMUX_LINE_IN,
2212 } },
2213 },
2214
2215 [EM2882_BOARD_EVGA_INDTUBE] = {
2216 .name = "Evga inDtube",
2217 .tuner_type = TUNER_XC2028,
2218 .tuner_gpio = default_tuner_gpio,
2219 .decoder = EM28XX_TVP5150,
2220 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
2221 .mts_firmware = 1,
2222 .has_dvb = 1,
2223 .dvb_gpio = evga_indtube_digital,
2224 .ir_codes = RC_MAP_EVGA_INDTUBE,
2225 .input = { {
2226 .type = EM28XX_VMUX_TELEVISION,
2227 .vmux = TVP5150_COMPOSITE0,
2228 .amux = EM28XX_AMUX_VIDEO,
2229 .gpio = evga_indtube_analog,
2230 }, {
2231 .type = EM28XX_VMUX_COMPOSITE,
2232 .vmux = TVP5150_COMPOSITE1,
2233 .amux = EM28XX_AMUX_LINE_IN,
2234 .gpio = evga_indtube_analog,
2235 }, {
2236 .type = EM28XX_VMUX_SVIDEO,
2237 .vmux = TVP5150_SVIDEO,
2238 .amux = EM28XX_AMUX_LINE_IN,
2239 .gpio = evga_indtube_analog,
2240 } },
2241 },
2242 /*
2243 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM
2244 * (Philips TDA10023 + Infineon TUA6034)
2245 */
2246 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
2247 .name = "Reddo DVB-C USB TV Box",
2248 .tuner_type = TUNER_ABSENT,
2249 .tuner_gpio = reddo_dvb_c_usb_box,
2250 .has_dvb = 1,
2251 },
2252 /*
2253 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
2254 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
2255 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2
2256 */
2257 [EM2870_BOARD_KWORLD_A340] = {
2258 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
2259 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
2260 .has_dvb = 1,
2261 .dvb_gpio = kworld_a340_digital,
2262 .tuner_gpio = default_tuner_gpio,
2263 },
2264 /*
2265 * 2013:024f PCTV nanoStick T2 290e.
2266 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2
2267 */
2268 [EM28174_BOARD_PCTV_290E] = {
2269 .name = "PCTV nanoStick T2 290e",
2270 .def_i2c_bus = 1,
2271 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2272 EM28XX_I2C_FREQ_100_KHZ,
2273 .tuner_type = TUNER_ABSENT,
2274 .tuner_gpio = pctv_290e,
2275 .has_dvb = 1,
2276 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2277 },
2278 /*
2279 * 2013:024f PCTV DVB-S2 Stick 460e
2280 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293
2281 */
2282 [EM28174_BOARD_PCTV_460E] = {
2283 .def_i2c_bus = 1,
2284 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2285 EM28XX_I2C_FREQ_400_KHZ,
2286 .name = "PCTV DVB-S2 Stick (460e)",
2287 .tuner_type = TUNER_ABSENT,
2288 .tuner_gpio = pctv_460e,
2289 .has_dvb = 1,
2290 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2291 },
2292 /*
2293 * eb1a:5006 Honestech VIDBOX NW03
2294 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2295 */
2296 [EM2860_BOARD_HT_VIDBOX_NW03] = {
2297 .name = "Honestech Vidbox NW03",
2298 .tuner_type = TUNER_ABSENT,
2299 .decoder = EM28XX_SAA711X,
2300 .input = { {
2301 .type = EM28XX_VMUX_COMPOSITE,
2302 .vmux = SAA7115_COMPOSITE0,
2303 .amux = EM28XX_AMUX_LINE_IN,
2304 }, {
2305 .type = EM28XX_VMUX_SVIDEO,
2306 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */
2307 .amux = EM28XX_AMUX_LINE_IN,
2308 } },
2309 },
2310 /*
2311 * 1b80:e425 MaxMedia UB425-TC
2312 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2313 */
2314 [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
2315 .name = "MaxMedia UB425-TC",
2316 .tuner_type = TUNER_ABSENT,
2317 .tuner_gpio = maxmedia_ub425_tc,
2318 .has_dvb = 1,
2319 .ir_codes = RC_MAP_REDDO,
2320 .def_i2c_bus = 1,
2321 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2322 EM28XX_I2C_FREQ_400_KHZ,
2323 },
2324 /*
2325 * 2304:0242 PCTV QuatroStick (510e)
2326 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
2327 */
2328 [EM2884_BOARD_PCTV_510E] = {
2329 .name = "PCTV QuatroStick (510e)",
2330 .tuner_type = TUNER_ABSENT,
2331 .tuner_gpio = pctv_510e,
2332 .has_dvb = 1,
2333 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2334 .def_i2c_bus = 1,
2335 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2336 EM28XX_I2C_FREQ_400_KHZ,
2337 },
2338 /*
2339 * 2013:0251 PCTV QuatroStick nano (520e)
2340 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
2341 */
2342 [EM2884_BOARD_PCTV_520E] = {
2343 .name = "PCTV QuatroStick nano (520e)",
2344 .tuner_type = TUNER_ABSENT,
2345 .tuner_gpio = pctv_520e,
2346 .has_dvb = 1,
2347 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2348 .def_i2c_bus = 1,
2349 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2350 EM28XX_I2C_FREQ_400_KHZ,
2351 },
2352 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = {
2353 .name = "Terratec Cinergy HTC USB XS",
2354 .has_dvb = 1,
2355 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
2356 .tuner_type = TUNER_ABSENT,
2357 .def_i2c_bus = 1,
2358 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2359 EM28XX_I2C_FREQ_400_KHZ,
2360 },
2361 /*
2362 * 1b80:e1cc Delock 61959
2363 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
2364 * mostly the same as MaxMedia UB-425-TC but different remote
2365 */
2366 [EM2874_BOARD_DELOCK_61959] = {
2367 .name = "Delock 61959",
2368 .tuner_type = TUNER_ABSENT,
2369 .tuner_gpio = maxmedia_ub425_tc,
2370 .has_dvb = 1,
2371 .ir_codes = RC_MAP_DELOCK_61959,
2372 .def_i2c_bus = 1,
2373 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2374 EM28XX_I2C_FREQ_400_KHZ,
2375 },
2376 /*
2377 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
2378 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2379 */
2380 [EM2874_BOARD_KWORLD_UB435Q_V2] = {
2381 .name = "KWorld USB ATSC TV Stick UB435-Q V2",
2382 .tuner_type = TUNER_ABSENT,
2383 .has_dvb = 1,
2384 .dvb_gpio = kworld_a340_digital,
2385 .tuner_gpio = default_tuner_gpio,
2386 .def_i2c_bus = 1,
2387 },
2388 /*
2389 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3
2390 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
2391 */
2392 [EM2874_BOARD_KWORLD_UB435Q_V3] = {
2393 .name = "KWorld USB ATSC TV Stick UB435-Q V3",
2394 .tuner_type = TUNER_ABSENT,
2395 .has_dvb = 1,
2396 .tuner_gpio = kworld_ub435q_v3_digital,
2397 .def_i2c_bus = 1,
2398 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2399 EM28XX_I2C_FREQ_100_KHZ,
2400 .leds = kworld_ub435q_v3_leds,
2401 },
2402 [EM2874_BOARD_PCTV_HD_MINI_80E] = {
2403 .name = "Pinnacle PCTV HD Mini",
2404 .tuner_type = TUNER_ABSENT,
2405 .has_dvb = 1,
2406 .dvb_gpio = em2874_pctv_80e_digital,
2407 .decoder = EM28XX_NODECODER,
2408 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2409 .leds = pctv_80e_leds,
2410 },
2411 /*
2412 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
2413 * Empia EM2765 + OmniVision OV2640
2414 */
2415 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
2416 .name = "SpeedLink Vicious And Devine Laplace webcam",
2417 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
2418 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2419 EM28XX_I2C_FREQ_100_KHZ,
2420 .def_i2c_bus = 1,
2421 .tuner_type = TUNER_ABSENT,
2422 .is_webcam = 1,
2423 .input = { {
2424 .type = EM28XX_VMUX_COMPOSITE,
2425 .amux = EM28XX_AMUX_VIDEO,
2426 .gpio = speedlink_vad_laplace_reg_seq,
2427 } },
2428 .buttons = speedlink_vad_laplace_buttons,
2429 .leds = speedlink_vad_laplace_leds,
2430 },
2431 /*
2432 * 2013:0258 PCTV DVB-S2 Stick (461e)
2433 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293
2434 */
2435 [EM28178_BOARD_PCTV_461E] = {
2436 .def_i2c_bus = 1,
2437 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2438 EM28XX_I2C_FREQ_400_KHZ,
2439 .name = "PCTV DVB-S2 Stick (461e)",
2440 .tuner_type = TUNER_ABSENT,
2441 .tuner_gpio = pctv_461e,
2442 .has_dvb = 1,
2443 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2444 },
2445 /*
2446 * 2013:0259 PCTV DVB-S2 Stick (461e_v2)
2447 * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293
2448 */
2449 [EM28178_BOARD_PCTV_461E_V2] = {
2450 .def_i2c_bus = 1,
2451 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2452 EM28XX_I2C_FREQ_400_KHZ,
2453 .name = "PCTV DVB-S2 Stick (461e v2)",
2454 .tuner_type = TUNER_ABSENT,
2455 .tuner_gpio = pctv_461e,
2456 .has_dvb = 1,
2457 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2458 },
2459 /*
2460 * 2013:025f PCTV tripleStick (292e).
2461 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157
2462 */
2463 [EM28178_BOARD_PCTV_292E] = {
2464 .name = "PCTV tripleStick (292e)",
2465 .def_i2c_bus = 1,
2466 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2467 EM28XX_I2C_FREQ_400_KHZ,
2468 .tuner_type = TUNER_ABSENT,
2469 .tuner_gpio = pctv_292e,
2470 .has_dvb = 1,
2471 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
2472 },
2473 [EM2861_BOARD_LEADTEK_VC100] = {
2474 .name = "Leadtek VC100",
2475 .tuner_type = TUNER_ABSENT, /* Capture only device */
2476 .decoder = EM28XX_TVP5150,
2477 .input = { {
2478 .type = EM28XX_VMUX_COMPOSITE,
2479 .vmux = TVP5150_COMPOSITE1,
2480 .amux = EM28XX_AMUX_LINE_IN,
2481 }, {
2482 .type = EM28XX_VMUX_SVIDEO,
2483 .vmux = TVP5150_SVIDEO,
2484 .amux = EM28XX_AMUX_LINE_IN,
2485 } },
2486 },
2487 /*
2488 * eb1a:8179 Terratec Cinergy T2 Stick HD.
2489 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146
2490 */
2491 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
2492 .name = "Terratec Cinergy T2 Stick HD",
2493 .def_i2c_bus = 1,
2494 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2495 EM28XX_I2C_FREQ_400_KHZ,
2496 .tuner_type = TUNER_ABSENT,
2497 .tuner_gpio = terratec_t2_stick_hd,
2498 .has_dvb = 1,
2499 .ir_codes = RC_MAP_TERRATEC_SLIM_2,
2500 },
2501
2502 /*
2503 * 3275:0085 PLEX PX-BCUD.
2504 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042
2505 */
2506 [EM28178_BOARD_PLEX_PX_BCUD] = {
2507 .name = "PLEX PX-BCUD",
2508 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ,
2509 .def_i2c_bus = 1,
2510 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
2511 .tuner_type = TUNER_ABSENT,
2512 .tuner_gpio = plex_px_bcud,
2513 .has_dvb = 1,
2514 },
2515 /*
2516 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc.
2517 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk.
2518 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157
2519 */
2520 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = {
2521 .name = "Hauppauge WinTV-dualHD DVB",
2522 .def_i2c_bus = 1,
2523 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2524 EM28XX_I2C_FREQ_400_KHZ,
2525 .tuner_type = TUNER_SI2157,
2526 .tuner_gpio = hauppauge_dualhd_dvb,
2527 .has_dvb = 1,
2528 .has_dual_ts = 1,
2529 .ir_codes = RC_MAP_HAUPPAUGE,
2530 .leds = hauppauge_dualhd_leds,
2531 .input = { {
2532 .type = EM28XX_VMUX_COMPOSITE,
2533 .vmux = TVP5150_COMPOSITE1,
2534 .amux = EM28XX_AMUX_LINE_IN,
2535 } },
2536 },
2537 /*
2538 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc.
2539 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk.
2540 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157
2541 */
2542 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = {
2543 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM",
2544 .def_i2c_bus = 1,
2545 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2546 EM28XX_I2C_FREQ_400_KHZ,
2547 .tuner_type = TUNER_ABSENT,
2548 .tuner_gpio = hauppauge_dualhd_dvb,
2549 .has_dvb = 1,
2550 .has_dual_ts = 1,
2551 .ir_codes = RC_MAP_HAUPPAUGE,
2552 .leds = hauppauge_dualhd_leds,
2553 },
2554 /*
2555 * 1b80:e349 Magix USB Videowandler-2
2556 * (same chips as Honestech VIDBOX NW03)
2557 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2558 */
2559 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = {
2560 .name = "Magix USB Videowandler-2",
2561 .tuner_type = TUNER_ABSENT,
2562 .decoder = EM28XX_SAA711X,
2563 .input = { {
2564 .type = EM28XX_VMUX_COMPOSITE,
2565 .vmux = SAA7115_COMPOSITE0,
2566 .amux = EM28XX_AMUX_LINE_IN,
2567 }, {
2568 .type = EM28XX_VMUX_SVIDEO,
2569 .amux = EM28XX_AMUX_LINE_IN,
2570 } },
2571 },
2572 /*
2573 * 1f4d:1abe MyGica iGrabber
2574 * (same as several other EM2860 devices)
2575 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
2576 */
2577 [EM2860_BOARD_MYGICA_IGRABBER] = {
2578 .name = "MyGica iGrabber",
2579 .vchannels = 2,
2580 .tuner_type = TUNER_ABSENT,
2581 .decoder = EM28XX_SAA711X,
2582 .input = { {
2583 .type = EM28XX_VMUX_COMPOSITE,
2584 .vmux = SAA7115_COMPOSITE0,
2585 .amux = EM28XX_AMUX_LINE_IN,
2586 }, {
2587 .type = EM28XX_VMUX_SVIDEO,
2588 .vmux = SAA7115_SVIDEO3,
2589 .amux = EM28XX_AMUX_LINE_IN,
2590 } },
2591 },
2592 /* 2040:826d Hauppauge USB QuadHD
2593 * Empia 28274, Max Linear 692 ATSC combo demod/tuner
2594 */
2595 [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = {
2596 .name = "Hauppauge USB QuadHD ATSC",
2597 .def_i2c_bus = 1,
2598 .has_dual_ts = 1,
2599 .has_dvb = 1,
2600 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ,
2601 .tuner_type = TUNER_ABSENT,
2602 .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq,
2603 .leds = hauppauge_usb_quadhd_leds,
2604 },
2605 /*
2606 * eb1a:2860 MyGica UTV3 Analog USB2.0 TV Box
2607 * Empia EM2860, Philips SAA7113, NXP TDA9801T demod,
2608 * Tena TNF931D-DFDR1 tuner (contains NXP TDA6509A),
2609 * ST HCF4052 demux (switches audio to line out),
2610 * no audio over USB
2611 */
2612 [EM2860_BOARD_MYGICA_UTV3] = {
2613 .name = "MyGica UTV3 Analog USB2.0 TV Box",
2614 .xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_12MHZ,
2615 .tuner_type = TUNER_TENA_TNF_931D_DFDR1,
2616 .ir_codes = RC_MAP_MYGICA_UTV3,
2617 .decoder = EM28XX_SAA711X,
2618 .suspend_gpio = mygica_utv3_suspend_gpio,
2619 .input = { {
2620 .type = EM28XX_VMUX_COMPOSITE,
2621 .vmux = SAA7115_COMPOSITE0,
2622 .amux = EM28XX_AMUX_VIDEO,
2623 .gpio = mygica_utv3_composite_audio_gpio,
2624 }, {
2625 .type = EM28XX_VMUX_TELEVISION,
2626 .vmux = SAA7115_COMPOSITE2,
2627 .amux = EM28XX_AMUX_VIDEO,
2628 .gpio = mygica_utv3_tuner_audio_gpio,
2629 } },
2630 },
2631 };
2632 EXPORT_SYMBOL_GPL(em28xx_boards);
2633
2634 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
2635
2636 /* table of devices that work with this driver */
2637 struct usb_device_id em28xx_id_table[] = {
2638 { USB_DEVICE(0xeb1a, 0x2750),
2639 .driver_info = EM2750_BOARD_UNKNOWN },
2640 { USB_DEVICE(0xeb1a, 0x2751),
2641 .driver_info = EM2750_BOARD_UNKNOWN },
2642 { USB_DEVICE(0xeb1a, 0x2800),
2643 .driver_info = EM2800_BOARD_UNKNOWN },
2644 { USB_DEVICE(0xeb1a, 0x2710),
2645 .driver_info = EM2820_BOARD_UNKNOWN },
2646 { USB_DEVICE(0xeb1a, 0x2820),
2647 .driver_info = EM2820_BOARD_UNKNOWN },
2648 { USB_DEVICE(0xeb1a, 0x2821),
2649 .driver_info = EM2820_BOARD_UNKNOWN },
2650 { USB_DEVICE(0xeb1a, 0x2860),
2651 .driver_info = EM2820_BOARD_UNKNOWN },
2652 { USB_DEVICE(0xeb1a, 0x2861),
2653 .driver_info = EM2820_BOARD_UNKNOWN },
2654 { USB_DEVICE(0xeb1a, 0x2862),
2655 .driver_info = EM2820_BOARD_UNKNOWN },
2656 { USB_DEVICE(0xeb1a, 0x2863),
2657 .driver_info = EM2820_BOARD_UNKNOWN },
2658 { USB_DEVICE(0xeb1a, 0x2870),
2659 .driver_info = EM2820_BOARD_UNKNOWN },
2660 { USB_DEVICE(0xeb1a, 0x2881),
2661 .driver_info = EM2820_BOARD_UNKNOWN },
2662 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */
2663 .driver_info = EM2820_BOARD_UNKNOWN },
2664 { USB_DEVICE(0xeb1a, 0x2868),
2665 .driver_info = EM2820_BOARD_UNKNOWN },
2666 { USB_DEVICE(0xeb1a, 0x2875),
2667 .driver_info = EM2820_BOARD_UNKNOWN },
2668 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */
2669 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2670 { USB_DEVICE(0xeb1a, 0xe300),
2671 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
2672 { USB_DEVICE(0xeb1a, 0xe303),
2673 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
2674 { USB_DEVICE(0xeb1a, 0xe305),
2675 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
2676 { USB_DEVICE(0xeb1a, 0xe310),
2677 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
2678 { USB_DEVICE(0xeb1a, 0xa313),
2679 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
2680 { USB_DEVICE(0xeb1a, 0xa316),
2681 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
2682 { USB_DEVICE(0xeb1a, 0xe320),
2683 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
2684 { USB_DEVICE(0xeb1a, 0xe323),
2685 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
2686 { USB_DEVICE(0xeb1a, 0xe350),
2687 .driver_info = EM2870_BOARD_KWORLD_350U },
2688 { USB_DEVICE(0xeb1a, 0xe355),
2689 .driver_info = EM2870_BOARD_KWORLD_355U },
2690 { USB_DEVICE(0xeb1a, 0x2801),
2691 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
2692 { USB_DEVICE(0xeb1a, 0xe357),
2693 .driver_info = EM2870_BOARD_KWORLD_355U },
2694 { USB_DEVICE(0xeb1a, 0xe359),
2695 .driver_info = EM2870_BOARD_KWORLD_355U },
2696 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */
2697 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2698 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */
2699 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2700 { USB_DEVICE(0x0ccd, 0x0036),
2701 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
2702 { USB_DEVICE(0x0ccd, 0x004c),
2703 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
2704 { USB_DEVICE(0x0ccd, 0x004f),
2705 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
2706 { USB_DEVICE(0x0ccd, 0x005e),
2707 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2708 { USB_DEVICE(0x0ccd, 0x0042),
2709 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
2710 { USB_DEVICE(0x0ccd, 0x0043),
2711 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 },
2712 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */
2713 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2714 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */
2715 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS },
2716 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */
2717 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2718 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */
2719 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2720 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */
2721 .driver_info = EM2884_BOARD_TERRATEC_H5 },
2722 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */
2723 .driver_info = EM2884_BOARD_TERRATEC_H6 },
2724 { USB_DEVICE(0x0ccd, 0x0084),
2725 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
2726 { USB_DEVICE(0x0ccd, 0x0096),
2727 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2728 { USB_DEVICE(0x0ccd, 0x10AF),
2729 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
2730 { USB_DEVICE(0x0ccd, 0x00b2),
2731 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK },
2732 { USB_DEVICE(0x0fd9, 0x0018),
2733 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 },
2734 { USB_DEVICE(0x0fd9, 0x0033),
2735 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE },
2736 { USB_DEVICE(0x185b, 0x2870),
2737 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
2738 { USB_DEVICE(0x185b, 0x2041),
2739 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
2740 { USB_DEVICE(0x2040, 0x4200),
2741 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2742 { USB_DEVICE(0x2040, 0x4201),
2743 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
2744 { USB_DEVICE(0x2040, 0x6500),
2745 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
2746 { USB_DEVICE(0x2040, 0x6502),
2747 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
2748 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
2749 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2750 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
2751 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2752 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
2753 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
2754 { USB_DEVICE(0x2040, 0x651f),
2755 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
2756 { USB_DEVICE(0x2040, 0x0265),
2757 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2758 { USB_DEVICE(0x2040, 0x8265),
2759 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB },
2760 { USB_DEVICE(0x2040, 0x026d),
2761 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
2762 { USB_DEVICE(0x2040, 0x826d),
2763 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 },
2764 { USB_DEVICE(0x2040, 0x846d),
2765 .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD },
2766 { USB_DEVICE(0x0438, 0xb002),
2767 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
2768 { USB_DEVICE(0x2001, 0xf112),
2769 .driver_info = EM2820_BOARD_DLINK_USB_TV },
2770 { USB_DEVICE(0x2304, 0x0207),
2771 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2772 { USB_DEVICE(0x2304, 0x0208),
2773 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
2774 { USB_DEVICE(0x2304, 0x021a),
2775 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2776 { USB_DEVICE(0x2304, 0x0226),
2777 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E },
2778 { USB_DEVICE(0x2304, 0x0227),
2779 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
2780 { USB_DEVICE(0x2304, 0x023f),
2781 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E },
2782 { USB_DEVICE(0x0413, 0x6023),
2783 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
2784 { USB_DEVICE(0x093b, 0xa003),
2785 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
2786 { USB_DEVICE(0x093b, 0xa005),
2787 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
2788 { USB_DEVICE(0x04bb, 0x0515),
2789 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
2790 { USB_DEVICE(0xeb1a, 0x50a6),
2791 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
2792 { USB_DEVICE(0x1b80, 0xa340),
2793 .driver_info = EM2870_BOARD_KWORLD_A340 },
2794 { USB_DEVICE(0x1b80, 0xe346),
2795 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
2796 { USB_DEVICE(0x1b80, 0xe34c),
2797 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 },
2798 { USB_DEVICE(0x2013, 0x024f),
2799 .driver_info = EM28174_BOARD_PCTV_290E },
2800 { USB_DEVICE(0x2013, 0x024c),
2801 .driver_info = EM28174_BOARD_PCTV_460E },
2802 { USB_DEVICE(0x2040, 0x1605),
2803 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C },
2804 { USB_DEVICE(0x1b80, 0xe755),
2805 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO },
2806 { USB_DEVICE(0xeb1a, 0x5006),
2807 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 },
2808 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */
2809 .driver_info = EM2860_BOARD_EASYCAP },
2810 { USB_DEVICE(0x1b80, 0xe425),
2811 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC },
2812 { USB_DEVICE(0x1f4d, 0x1abe),
2813 .driver_info = EM2860_BOARD_MYGICA_IGRABBER },
2814 { USB_DEVICE(0x2304, 0x0242),
2815 .driver_info = EM2884_BOARD_PCTV_510E },
2816 { USB_DEVICE(0x2013, 0x0251),
2817 .driver_info = EM2884_BOARD_PCTV_520E },
2818 { USB_DEVICE(0x1b80, 0xe1cc),
2819 .driver_info = EM2874_BOARD_DELOCK_61959 },
2820 { USB_DEVICE(0x1ae7, 0x9003),
2821 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2822 { USB_DEVICE(0x1ae7, 0x9004),
2823 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE },
2824 { USB_DEVICE(0x2013, 0x0258),
2825 .driver_info = EM28178_BOARD_PCTV_461E },
2826 { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */
2827 .driver_info = EM28178_BOARD_PCTV_461E },
2828 { USB_DEVICE(0x2013, 0x0461),
2829 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2830 { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */
2831 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2832 { USB_DEVICE(0x2013, 0x0259),
2833 .driver_info = EM28178_BOARD_PCTV_461E_V2 },
2834 { USB_DEVICE(0x2013, 0x025f),
2835 .driver_info = EM28178_BOARD_PCTV_292E },
2836 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */
2837 .driver_info = EM28178_BOARD_PCTV_292E },
2838 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */
2839 .driver_info = EM28178_BOARD_PCTV_292E },
2840 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */
2841 .driver_info = EM28178_BOARD_PCTV_292E },
2842 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */
2843 .driver_info = EM28178_BOARD_PCTV_292E },
2844 { USB_DEVICE(0x0413, 0x6f07),
2845 .driver_info = EM2861_BOARD_LEADTEK_VC100 },
2846 { USB_DEVICE(0xeb1a, 0x8179),
2847 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD },
2848 { USB_DEVICE(0x3275, 0x0085),
2849 .driver_info = EM28178_BOARD_PLEX_PX_BCUD },
2850 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */
2851 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN },
2852 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */
2853 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 },
2854 { },
2855 };
2856 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
2857
2858 /*
2859 * EEPROM hash table for devices with generic USB IDs
2860 */
2861 static const struct em28xx_hash_table em28xx_eeprom_hash[] = {
2862 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
2863 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
2864 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
2865 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
2866 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
2867 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
2868 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
2869 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
2870 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
2871 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
2872 {0x8f597549, EM2860_BOARD_MYGICA_UTV3, TUNER_TENA_TNF_931D_DFDR1},
2873 };
2874
2875 /* I2C devicelist hash table for devices with generic USB IDs */
2876 static const struct em28xx_hash_table em28xx_i2c_hash[] = {
2877 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
2878 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
2879 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
2880 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
2881 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
2882 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
2883 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
2884 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
2885 {0x840d0484, EM2860_BOARD_MYGICA_UTV3, TUNER_TENA_TNF_931D_DFDR1},
2886 };
2887
2888 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
2889
2890 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
2891 {
2892 struct em28xx_i2c_bus *i2c_bus = ptr;
2893 struct em28xx *dev = i2c_bus->dev;
2894 int rc = 0;
2895
2896 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000)
2897 return 0;
2898
2899 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET)
2900 return 0;
2901
2902 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
2903
2904 return rc;
2905 }
2906 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
2907
2908 static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
2909 {
2910 const struct em28xx_board *board = &em28xx_boards[dev->model];
2911 u8 xclk = board->xclk, i2c_speed = board->i2c_speed;
2912
2913 /*
2914 * Those are the default values for the majority of boards
2915 * Use those values if not specified otherwise at boards entry
2916 */
2917 if (!xclk)
2918 xclk = EM28XX_XCLK_IR_RC5_MODE |
2919 EM28XX_XCLK_FREQUENCY_12MHZ;
2920
2921 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
2922
2923 if (!i2c_speed)
2924 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
2925 EM28XX_I2C_FREQ_100_KHZ;
2926
2927 dev->i2c_speed = i2c_speed & 0x03;
2928
2929 if (!dev->board.is_em2800)
2930 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed);
2931 msleep(50);
2932 }
2933
2934 static inline void em28xx_set_model(struct em28xx *dev)
2935 {
2936 dev->board = em28xx_boards[dev->model];
2937 dev->has_msp34xx = dev->board.has_msp34xx;
2938 dev->is_webcam = dev->board.is_webcam;
2939
2940 em28xx_set_xclk_i2c_speed(dev);
2941
2942 /* Should be initialized early, for I2C to work */
2943 dev->def_i2c_bus = dev->board.def_i2c_bus;
2944 }
2945
2946 /*
2947 * Wait until AC97_RESET reports the expected value reliably before proceeding.
2948 * We also check that two unrelated registers accesses don't return the same
2949 * value to avoid premature return.
2950 * This procedure helps ensuring AC97 register accesses are reliable.
2951 */
2952 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
2953 int expected_feat)
2954 {
2955 unsigned long timeout = jiffies + msecs_to_jiffies(2000);
2956 int feat, powerdown;
2957
2958 while (time_is_after_jiffies(timeout)) {
2959 feat = em28xx_read_ac97(dev, AC97_RESET);
2960 if (feat < 0)
2961 return feat;
2962
2963 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN);
2964 if (powerdown < 0)
2965 return powerdown;
2966
2967 if (feat == expected_feat && feat != powerdown)
2968 return 0;
2969
2970 msleep(50);
2971 }
2972
2973 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n");
2974 return -ETIMEDOUT;
2975 }
2976
2977 /*
2978 * Since em28xx_pre_card_setup() requires a proper dev->model,
2979 * this won't work for boards with generic PCI IDs
2980 */
2981 static void em28xx_pre_card_setup(struct em28xx *dev)
2982 {
2983 /*
2984 * Set the initial XCLK and I2C clock values based on the board
2985 * definition
2986 */
2987 em28xx_set_xclk_i2c_speed(dev);
2988
2989 /* request some modules */
2990 switch (dev->model) {
2991 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2992 /* Sets the msp34xx I2S speed */
2993 dev->i2s_speed = 2048000;
2994 break;
2995 case EM2861_BOARD_KWORLD_PVRTV_300U:
2996 case EM2880_BOARD_KWORLD_DVB_305U:
2997 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
2998 usleep_range(10000, 11000);
2999 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
3000 usleep_range(10000, 11000);
3001 break;
3002 case EM2870_BOARD_COMPRO_VIDEOMATE:
3003 /*
3004 * TODO: someone can do some cleanup here...
3005 * not everything's needed
3006 */
3007 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
3008 usleep_range(10000, 11000);
3009 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
3010 usleep_range(10000, 11000);
3011 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3012 msleep(70);
3013 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
3014 msleep(70);
3015 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc);
3016 msleep(70);
3017 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
3018 msleep(70);
3019 break;
3020 case EM2870_BOARD_TERRATEC_XS_MT2060:
3021 /*
3022 * this device needs some gpio writes to get the DVB-T
3023 * demod work
3024 */
3025 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3026 msleep(70);
3027 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
3028 msleep(70);
3029 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3030 msleep(70);
3031 break;
3032 case EM2870_BOARD_PINNACLE_PCTV_DVB:
3033 /*
3034 * this device needs some gpio writes to get the
3035 * DVB-T demod work
3036 */
3037 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3038 msleep(70);
3039 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
3040 msleep(70);
3041 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3042 msleep(70);
3043 break;
3044 case EM2820_BOARD_GADMEI_UTV310:
3045 case EM2820_BOARD_MSI_VOX_USB_2:
3046 /* enables audio for that devices */
3047 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3048 break;
3049
3050 case EM2882_BOARD_KWORLD_ATSC_315U:
3051 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
3052 usleep_range(10000, 11000);
3053 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3054 usleep_range(10000, 11000);
3055 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
3056 usleep_range(10000, 11000);
3057 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
3058 usleep_range(10000, 11000);
3059 break;
3060
3061 case EM2860_BOARD_KAIOMY_TVNPC_U2:
3062 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
3063 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
3064 em28xx_write_regs(dev, 0x0d, "\x42", 1);
3065 em28xx_write_regs(dev, 0x08, "\xfd", 1);
3066 usleep_range(10000, 11000);
3067 em28xx_write_regs(dev, 0x08, "\xff", 1);
3068 usleep_range(10000, 11000);
3069 em28xx_write_regs(dev, 0x08, "\x7f", 1);
3070 usleep_range(10000, 11000);
3071 em28xx_write_regs(dev, 0x08, "\x6b", 1);
3072
3073 break;
3074 case EM2860_BOARD_EASYCAP:
3075 em28xx_write_regs(dev, 0x08, "\xf8", 1);
3076 break;
3077
3078 case EM2820_BOARD_IODATA_GVMVP_SZ:
3079 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
3080 msleep(70);
3081 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
3082 usleep_range(10000, 11000);
3083 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
3084 msleep(70);
3085 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3086 msleep(70);
3087 break;
3088
3089 case EM2860_BOARD_TERRATEC_GRABBY:
3090 /*
3091 * HACK?: Ensure AC97 register reading is reliable before
3092 * proceeding. In practice, this will wait about 1.6 seconds.
3093 */
3094 em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
3095 break;
3096 }
3097
3098 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3099 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3100
3101 /* Unlock device */
3102 em28xx_set_mode(dev, EM28XX_SUSPEND);
3103 }
3104
3105 static int em28xx_hint_board(struct em28xx *dev)
3106 {
3107 int i;
3108
3109 if (dev->is_webcam) {
3110 if (dev->em28xx_sensor == EM28XX_MT9V011) {
3111 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
3112 } else if (dev->em28xx_sensor == EM28XX_MT9M001 ||
3113 dev->em28xx_sensor == EM28XX_MT9M111) {
3114 dev->model = EM2750_BOARD_UNKNOWN;
3115 }
3116 /* FIXME: IMPROVE ! */
3117
3118 return 0;
3119 }
3120
3121 /*
3122 * HINT method: EEPROM
3123 *
3124 * This method works only for boards with eeprom.
3125 * Uses a hash of all eeprom bytes. The hash should be
3126 * unique for a vendor/tuner pair.
3127 * There are a high chance that tuners for different
3128 * video standards produce different hashes.
3129 */
3130 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
3131 if (dev->hash == em28xx_eeprom_hash[i].hash) {
3132 dev->model = em28xx_eeprom_hash[i].model;
3133 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
3134
3135 dev_err(&dev->intf->dev,
3136 "Your board has no unique USB ID.\n"
3137 "A hint were successfully done, based on eeprom hash.\n"
3138 "This method is not 100%% failproof.\n"
3139 "If the board were misdetected, please email this log to:\n"
3140 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3141 "Board detected as %s\n",
3142 em28xx_boards[dev->model].name);
3143
3144 return 0;
3145 }
3146 }
3147
3148 /*
3149 * HINT method: I2C attached devices
3150 *
3151 * This method works for all boards.
3152 * Uses a hash of i2c scanned devices.
3153 * Devices with the same i2c attached chips will
3154 * be considered equal.
3155 * This method is less precise than the eeprom one.
3156 */
3157
3158 /* user did not request i2c scanning => do it now */
3159 if (!dev->i2c_hash)
3160 em28xx_do_i2c_scan(dev, dev->def_i2c_bus);
3161
3162 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
3163 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
3164 dev->model = em28xx_i2c_hash[i].model;
3165 dev->tuner_type = em28xx_i2c_hash[i].tuner;
3166 dev_err(&dev->intf->dev,
3167 "Your board has no unique USB ID.\n"
3168 "A hint were successfully done, based on i2c devicelist hash.\n"
3169 "This method is not 100%% failproof.\n"
3170 "If the board were misdetected, please email this log to:\n"
3171 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3172 "Board detected as %s\n",
3173 em28xx_boards[dev->model].name);
3174
3175 return 0;
3176 }
3177 }
3178
3179 dev_err(&dev->intf->dev,
3180 "Your board has no unique USB ID and thus need a hint to be detected.\n"
3181 "You may try to use card=<n> insmod option to workaround that.\n"
3182 "Please send an email with this log to:\n"
3183 "\tV4L Mailing List <linux-media@vger.kernel.org>\n"
3184 "Board eeprom hash is 0x%08lx\n"
3185 "Board i2c devicelist hash is 0x%08lx\n",
3186 dev->hash, dev->i2c_hash);
3187
3188 dev_err(&dev->intf->dev,
3189 "Here is a list of valid choices for the card=<n> insmod option:\n");
3190 for (i = 0; i < em28xx_bcount; i++) {
3191 dev_err(&dev->intf->dev,
3192 " card=%d -> %s\n", i, em28xx_boards[i].name);
3193 }
3194 return -1;
3195 }
3196
3197 static void em28xx_card_setup(struct em28xx *dev)
3198 {
3199 int i, j, idx;
3200 bool duplicate_entry;
3201
3202 /*
3203 * If the device can be a webcam, seek for a sensor.
3204 * If sensor is not found, then it isn't a webcam.
3205 */
3206 if (dev->is_webcam) {
3207 em28xx_detect_sensor(dev);
3208 if (dev->em28xx_sensor == EM28XX_NOSENSOR)
3209 /* NOTE: error/unknown sensor/no sensor */
3210 dev->is_webcam = 0;
3211 }
3212
3213 switch (dev->model) {
3214 case EM2750_BOARD_UNKNOWN:
3215 case EM2820_BOARD_UNKNOWN:
3216 case EM2800_BOARD_UNKNOWN:
3217 /*
3218 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
3219 *
3220 * This occurs because they share identical USB vendor and
3221 * product IDs.
3222 *
3223 * What we do here is look up the EEPROM hash of the K-WORLD
3224 * and if it is found then we decide that we do not have
3225 * a DIGIVOX and reset the device to the K-WORLD instead.
3226 *
3227 * This solution is only valid if they do not share eeprom
3228 * hash identities which has not been determined as yet.
3229 */
3230 if (em28xx_hint_board(dev) < 0) {
3231 dev_err(&dev->intf->dev, "Board not discovered\n");
3232 } else {
3233 em28xx_set_model(dev);
3234 em28xx_pre_card_setup(dev);
3235 }
3236 break;
3237 default:
3238 em28xx_set_model(dev);
3239 }
3240
3241 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n",
3242 dev->board.name, dev->model);
3243
3244 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
3245
3246 /* request some modules */
3247 switch (dev->model) {
3248 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
3249 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3250 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3251 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3252 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3253 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
3254 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB:
3255 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595:
3256 {
3257 struct tveeprom tv;
3258
3259 if (!dev->eedata)
3260 break;
3261 #if defined(CONFIG_MODULES) && defined(MODULE)
3262 request_module("tveeprom");
3263 #endif
3264 /* Call first TVeeprom */
3265
3266 tveeprom_hauppauge_analog(&tv, dev->eedata);
3267
3268 dev->tuner_type = tv.tuner_type;
3269
3270 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) {
3271 dev->i2s_speed = 2048000;
3272 dev->has_msp34xx = 1;
3273 }
3274 break;
3275 }
3276 case EM2882_BOARD_KWORLD_ATSC_315U:
3277 em28xx_write_reg(dev, 0x0d, 0x42);
3278 usleep_range(10000, 11000);
3279 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
3280 usleep_range(10000, 11000);
3281 break;
3282 case EM2820_BOARD_KWORLD_PVRTV2800RF:
3283 /* GPIO enables sound on KWORLD PVR TV 2800RF */
3284 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9);
3285 break;
3286 case EM2820_BOARD_UNKNOWN:
3287 case EM2800_BOARD_UNKNOWN:
3288 /*
3289 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
3290 *
3291 * This occurs because they share identical USB vendor and
3292 * product IDs.
3293 *
3294 * What we do here is look up the EEPROM hash of the K-WORLD
3295 * and if it is found then we decide that we do not have
3296 * a DIGIVOX and reset the device to the K-WORLD instead.
3297 *
3298 * This solution is only valid if they do not share eeprom
3299 * hash identities which has not been determined as yet.
3300 */
3301 case EM2880_BOARD_MSI_DIGIVOX_AD:
3302 if (!em28xx_hint_board(dev))
3303 em28xx_set_model(dev);
3304
3305 /*
3306 * In cases where we had to use a board hint, the call to
3307 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3308 * so make the call now so the analog GPIOs are set properly
3309 * before probing the i2c bus.
3310 */
3311 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3312 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3313 break;
3314
3315 /*
3316 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
3317 *
3318 * This occurs because they share identical USB vendor and
3319 * product IDs.
3320 *
3321 * What we do here is look up the EEPROM hash of the Dikom
3322 * and if it is found then we decide that we do not have
3323 * a Kworld and reset the device to the Dikom instead.
3324 *
3325 * This solution is only valid if they do not share eeprom
3326 * hash identities which has not been determined as yet.
3327 */
3328 case EM2882_BOARD_KWORLD_VS_DVBT:
3329 if (!em28xx_hint_board(dev))
3330 em28xx_set_model(dev);
3331
3332 /*
3333 * In cases where we had to use a board hint, the call to
3334 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
3335 * so make the call now so the analog GPIOs are set properly
3336 * before probing the i2c bus.
3337 */
3338 em28xx_gpio_set(dev, dev->board.tuner_gpio);
3339 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
3340 break;
3341 }
3342
3343 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
3344 dev_err(&dev->intf->dev,
3345 "\n\n"
3346 "The support for this board weren't valid yet.\n"
3347 "Please send a report of having this working\n"
3348 "not to V4L mailing list (and/or to other addresses)\n\n");
3349 }
3350
3351 /* Free eeprom data memory */
3352 kfree(dev->eedata);
3353 dev->eedata = NULL;
3354
3355 /* Allow override tuner type by a module parameter */
3356 if (tuner >= 0)
3357 dev->tuner_type = tuner;
3358
3359 /*
3360 * Dynamically generate a list of valid audio inputs for this
3361 * specific board, mapping them via enum em28xx_amux.
3362 */
3363
3364 idx = 0;
3365 for (i = 0; i < MAX_EM28XX_INPUT; i++) {
3366 if (!INPUT(i)->type)
3367 continue;
3368
3369 /* Skip already mapped audio inputs */
3370 duplicate_entry = false;
3371 for (j = 0; j < idx; j++) {
3372 if (INPUT(i)->amux == dev->amux_map[j]) {
3373 duplicate_entry = true;
3374 break;
3375 }
3376 }
3377 if (duplicate_entry)
3378 continue;
3379
3380 dev->amux_map[idx++] = INPUT(i)->amux;
3381 }
3382 for (; idx < MAX_EM28XX_INPUT; idx++)
3383 dev->amux_map[idx] = EM28XX_AMUX_UNUSED;
3384 }
3385
3386 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
3387 {
3388 memset(ctl, 0, sizeof(*ctl));
3389
3390 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3391 ctl->max_len = 64;
3392 ctl->mts = em28xx_boards[dev->model].mts_firmware;
3393
3394 switch (dev->model) {
3395 case EM2880_BOARD_EMPIRE_DUAL_TV:
3396 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
3397 case EM2882_BOARD_TERRATEC_HYBRID_XS:
3398 case EM2880_BOARD_TERRATEC_HYBRID_XS:
3399 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
3400 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
3401 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK:
3402 ctl->demod = XC3028_FE_ZARLINK456;
3403 break;
3404 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
3405 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E:
3406 ctl->demod = XC3028_FE_DEFAULT;
3407 break;
3408 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
3409 ctl->demod = XC3028_FE_DEFAULT;
3410 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3411 break;
3412 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
3413 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
3414 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
3415 /* FIXME: Better to specify the needed IF */
3416 ctl->demod = XC3028_FE_DEFAULT;
3417 break;
3418 case EM2883_BOARD_KWORLD_HYBRID_330U:
3419 case EM2882_BOARD_DIKOM_DK300:
3420 case EM2882_BOARD_KWORLD_VS_DVBT:
3421 ctl->demod = XC3028_FE_CHINA;
3422 ctl->fname = XC2028_DEFAULT_FIRMWARE;
3423 break;
3424 case EM2882_BOARD_EVGA_INDTUBE:
3425 ctl->demod = XC3028_FE_CHINA;
3426 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
3427 break;
3428 default:
3429 ctl->demod = XC3028_FE_OREN538;
3430 }
3431 }
3432 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028);
3433
3434 static void request_module_async(struct work_struct *work)
3435 {
3436 struct em28xx *dev = container_of(work,
3437 struct em28xx, request_module_wk);
3438
3439 /*
3440 * The em28xx extensions can be modules or builtin. If the
3441 * modules are already loaded or are built in, those extensions
3442 * can be initialised right now. Otherwise, the module init
3443 * code will do it.
3444 */
3445
3446 /*
3447 * Devices with an audio-only intf also have a V4L/DVB/RC
3448 * intf. Don't register extensions twice on those devices.
3449 */
3450 if (dev->is_audio_only) {
3451 #if defined(CONFIG_MODULES) && defined(MODULE)
3452 request_module("em28xx-alsa");
3453 #endif
3454 return;
3455 }
3456
3457 em28xx_init_extension(dev);
3458
3459 #if defined(CONFIG_MODULES) && defined(MODULE)
3460 if (dev->has_video)
3461 request_module("em28xx-v4l");
3462 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS)
3463 request_module("snd-usb-audio");
3464 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR)
3465 request_module("em28xx-alsa");
3466 if (dev->board.has_dvb)
3467 request_module("em28xx-dvb");
3468 if (dev->board.buttons ||
3469 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir))
3470 request_module("em28xx-rc");
3471 #endif /* CONFIG_MODULES */
3472 }
3473
3474 static void request_modules(struct em28xx *dev)
3475 {
3476 INIT_WORK(&dev->request_module_wk, request_module_async);
3477 schedule_work(&dev->request_module_wk);
3478 }
3479
3480 static void flush_request_modules(struct em28xx *dev)
3481 {
3482 flush_work(&dev->request_module_wk);
3483 }
3484
3485 static int em28xx_media_device_init(struct em28xx *dev,
3486 struct usb_device *udev)
3487 {
3488 #ifdef CONFIG_MEDIA_CONTROLLER
3489 struct media_device *mdev;
3490
3491 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
3492 if (!mdev)
3493 return -ENOMEM;
3494
3495 if (udev->product)
3496 media_device_usb_init(mdev, udev, udev->product);
3497 else if (udev->manufacturer)
3498 media_device_usb_init(mdev, udev, udev->manufacturer);
3499 else
3500 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev));
3501
3502 dev->media_dev = mdev;
3503 #endif
3504 return 0;
3505 }
3506
3507 static void em28xx_unregister_media_device(struct em28xx *dev)
3508 {
3509 #ifdef CONFIG_MEDIA_CONTROLLER
3510 if (dev->media_dev) {
3511 media_device_unregister(dev->media_dev);
3512 media_device_cleanup(dev->media_dev);
3513 kfree(dev->media_dev);
3514 dev->media_dev = NULL;
3515 }
3516 #endif
3517 }
3518
3519 /*
3520 * em28xx_release_resources()
3521 * unregisters the v4l2,i2c and usb devices
3522 * called when the device gets disconnected or at module unload
3523 */
3524 static void em28xx_release_resources(struct em28xx *dev)
3525 {
3526 struct usb_device *udev = interface_to_usbdev(dev->intf);
3527
3528 /*FIXME: I2C IR should be disconnected */
3529
3530 mutex_lock(&dev->lock);
3531
3532 em28xx_unregister_media_device(dev);
3533
3534 if (dev->def_i2c_bus)
3535 em28xx_i2c_unregister(dev, 1);
3536 em28xx_i2c_unregister(dev, 0);
3537
3538 if (dev->ts == PRIMARY_TS)
3539 usb_put_dev(udev);
3540
3541 /* Mark device as unused */
3542 clear_bit(dev->devno, em28xx_devused);
3543
3544 mutex_unlock(&dev->lock);
3545 };
3546
3547 /**
3548 * em28xx_free_device() - Free em28xx device
3549 *
3550 * @ref: struct kref for em28xx device
3551 *
3552 * This is called when all extensions and em28xx core unregisters a device
3553 */
3554 void em28xx_free_device(struct kref *ref)
3555 {
3556 struct em28xx *dev = kref_to_dev(ref);
3557
3558 dev_info(&dev->intf->dev, "Freeing device\n");
3559
3560 if (!dev->disconnected)
3561 em28xx_release_resources(dev);
3562
3563 if (dev->ts == PRIMARY_TS)
3564 kfree(dev->alt_max_pkt_size_isoc);
3565
3566 kfree(dev);
3567 }
3568 EXPORT_SYMBOL_GPL(em28xx_free_device);
3569
3570 /*
3571 * em28xx_init_dev()
3572 * allocates and inits the device structs, registers i2c bus and v4l device
3573 */
3574 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
3575 struct usb_interface *intf,
3576 int minor)
3577 {
3578 int retval;
3579 const char *chip_name = NULL;
3580
3581 dev->intf = intf;
3582 mutex_init(&dev->ctrl_urb_lock);
3583 spin_lock_init(&dev->slock);
3584
3585 dev->em28xx_write_regs = em28xx_write_regs;
3586 dev->em28xx_read_reg = em28xx_read_reg;
3587 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
3588 dev->em28xx_write_regs_req = em28xx_write_regs_req;
3589 dev->em28xx_read_reg_req = em28xx_read_reg_req;
3590 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
3591
3592 em28xx_set_model(dev);
3593
3594 dev->wait_after_write = 5;
3595
3596 /* Based on the Chip ID, set the device configuration */
3597 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
3598 if (retval > 0) {
3599 dev->chip_id = retval;
3600
3601 switch (dev->chip_id) {
3602 case CHIP_ID_EM2800:
3603 chip_name = "em2800";
3604 break;
3605 case CHIP_ID_EM2710:
3606 chip_name = "em2710";
3607 break;
3608 case CHIP_ID_EM2750:
3609 chip_name = "em2750";
3610 break;
3611 case CHIP_ID_EM2765:
3612 chip_name = "em2765";
3613 dev->wait_after_write = 0;
3614 dev->is_em25xx = 1;
3615 dev->eeprom_addrwidth_16bit = 1;
3616 break;
3617 case CHIP_ID_EM2820:
3618 chip_name = "em2710/2820";
3619 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) {
3620 __le16 idProd = udev->descriptor.idProduct;
3621
3622 if (le16_to_cpu(idProd) == 0x2710)
3623 chip_name = "em2710";
3624 else if (le16_to_cpu(idProd) == 0x2820)
3625 chip_name = "em2820";
3626 }
3627 /* NOTE: the em2820 is used in webcams, too ! */
3628 break;
3629 case CHIP_ID_EM2840:
3630 chip_name = "em2840";
3631 break;
3632 case CHIP_ID_EM2860:
3633 chip_name = "em2860";
3634 break;
3635 case CHIP_ID_EM2870:
3636 chip_name = "em2870";
3637 dev->wait_after_write = 0;
3638 break;
3639 case CHIP_ID_EM2874:
3640 chip_name = "em2874";
3641 dev->wait_after_write = 0;
3642 dev->eeprom_addrwidth_16bit = 1;
3643 break;
3644 case CHIP_ID_EM28174:
3645 chip_name = "em28174";
3646 dev->wait_after_write = 0;
3647 dev->eeprom_addrwidth_16bit = 1;
3648 break;
3649 case CHIP_ID_EM28178:
3650 chip_name = "em28178";
3651 dev->wait_after_write = 0;
3652 dev->eeprom_addrwidth_16bit = 1;
3653 break;
3654 case CHIP_ID_EM2883:
3655 chip_name = "em2882/3";
3656 dev->wait_after_write = 0;
3657 break;
3658 case CHIP_ID_EM2884:
3659 chip_name = "em2884";
3660 dev->wait_after_write = 0;
3661 dev->eeprom_addrwidth_16bit = 1;
3662 break;
3663 }
3664 }
3665 if (!chip_name)
3666 dev_info(&dev->intf->dev,
3667 "unknown em28xx chip ID (%d)\n", dev->chip_id);
3668 else
3669 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name);
3670
3671 em28xx_media_device_init(dev, udev);
3672
3673 if (dev->is_audio_only) {
3674 retval = em28xx_audio_setup(dev);
3675 if (retval) {
3676 retval = -ENODEV;
3677 goto err_deinit_media;
3678 }
3679 em28xx_init_extension(dev);
3680
3681 return 0;
3682 }
3683
3684 em28xx_pre_card_setup(dev);
3685
3686 rt_mutex_init(&dev->i2c_bus_lock);
3687
3688 /* register i2c bus 0 */
3689 if (dev->board.is_em2800)
3690 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800);
3691 else
3692 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
3693 if (retval < 0) {
3694 dev_err(&dev->intf->dev,
3695 "%s: em28xx_i2c_register bus 0 - error [%d]!\n",
3696 __func__, retval);
3697 goto err_deinit_media;
3698 }
3699
3700 /* register i2c bus 1 */
3701 if (dev->def_i2c_bus) {
3702 if (dev->is_em25xx)
3703 retval = em28xx_i2c_register(dev, 1,
3704 EM28XX_I2C_ALGO_EM25XX_BUS_B);
3705 else
3706 retval = em28xx_i2c_register(dev, 1,
3707 EM28XX_I2C_ALGO_EM28XX);
3708 if (retval < 0) {
3709 dev_err(&dev->intf->dev,
3710 "%s: em28xx_i2c_register bus 1 - error [%d]!\n",
3711 __func__, retval);
3712
3713 goto err_unreg_i2c;
3714 }
3715 }
3716
3717 /* Do board specific init and eeprom reading */
3718 em28xx_card_setup(dev);
3719
3720 return 0;
3721
3722 err_unreg_i2c:
3723 em28xx_i2c_unregister(dev, 0);
3724 err_deinit_media:
3725 em28xx_unregister_media_device(dev);
3726 return retval;
3727 }
3728
3729 static int em28xx_duplicate_dev(struct em28xx *dev)
3730 {
3731 int nr;
3732 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL);
3733
3734 if (!sec_dev) {
3735 dev->dev_next = NULL;
3736 return -ENOMEM;
3737 }
3738 /* Check to see next free device and mark as used */
3739 do {
3740 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3741 if (nr >= EM28XX_MAXBOARDS) {
3742 /* No free device slots */
3743 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n",
3744 EM28XX_MAXBOARDS);
3745 kfree(sec_dev);
3746 dev->dev_next = NULL;
3747 return -ENOMEM;
3748 }
3749 } while (test_and_set_bit(nr, em28xx_devused));
3750 sec_dev->devno = nr;
3751 snprintf(sec_dev->name, 28, "em28xx #%d", nr);
3752 sec_dev->dev_next = NULL;
3753 dev->dev_next = sec_dev;
3754 return 0;
3755 }
3756
3757 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
3758 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
3759
3760 static void em28xx_check_usb_descriptor(struct em28xx *dev,
3761 struct usb_device *udev,
3762 struct usb_interface *intf,
3763 int alt, int ep,
3764 bool *has_vendor_audio,
3765 bool *has_video,
3766 bool *has_dvb)
3767 {
3768 const struct usb_endpoint_descriptor *e;
3769 int sizedescr, size;
3770
3771 /*
3772 * NOTE:
3773 *
3774 * Old logic with support for isoc transfers only was:
3775 * 0x82 isoc => analog
3776 * 0x83 isoc => audio
3777 * 0x84 isoc => digital
3778 *
3779 * New logic with support for bulk transfers
3780 * 0x82 isoc => analog
3781 * 0x82 bulk => analog
3782 * 0x83 isoc* => audio
3783 * 0x84 isoc => digital
3784 * 0x84 bulk => analog or digital**
3785 * 0x85 isoc => digital TS2
3786 * 0x85 bulk => digital TS2
3787 * (*: audio should always be isoc)
3788 * (**: analog, if ep 0x82 is isoc, otherwise digital)
3789 *
3790 * The new logic preserves backwards compatibility and
3791 * reflects the endpoint configurations we have seen
3792 * so far. But there might be devices for which this
3793 * logic is not sufficient...
3794 */
3795
3796 e = &intf->altsetting[alt].endpoint[ep].desc;
3797
3798 if (!usb_endpoint_dir_in(e))
3799 return;
3800
3801 sizedescr = le16_to_cpu(e->wMaxPacketSize);
3802 size = sizedescr & 0x7ff;
3803
3804 if (udev->speed == USB_SPEED_HIGH)
3805 size = size * hb_mult(sizedescr);
3806
3807 /* Only inspect input endpoints */
3808
3809 switch (e->bEndpointAddress) {
3810 case 0x82:
3811 *has_video = true;
3812 if (usb_endpoint_xfer_isoc(e)) {
3813 dev->analog_ep_isoc = e->bEndpointAddress;
3814 dev->alt_max_pkt_size_isoc[alt] = size;
3815 } else if (usb_endpoint_xfer_bulk(e)) {
3816 dev->analog_ep_bulk = e->bEndpointAddress;
3817 }
3818 return;
3819 case 0x83:
3820 if (usb_endpoint_xfer_isoc(e))
3821 *has_vendor_audio = true;
3822 else
3823 dev_err(&intf->dev,
3824 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n");
3825 return;
3826 case 0x84:
3827 if (*has_video && (usb_endpoint_xfer_bulk(e))) {
3828 dev->analog_ep_bulk = e->bEndpointAddress;
3829 } else {
3830 if (usb_endpoint_xfer_isoc(e)) {
3831 if (size > dev->dvb_max_pkt_size_isoc) {
3832 /*
3833 * 2) some manufacturers (e.g. Terratec)
3834 * disable endpoints by setting
3835 * wMaxPacketSize to 0 bytes for all
3836 * alt settings. So far, we've seen
3837 * this for DVB isoc endpoints only.
3838 */
3839 *has_dvb = true;
3840 dev->dvb_ep_isoc = e->bEndpointAddress;
3841 dev->dvb_max_pkt_size_isoc = size;
3842 dev->dvb_alt_isoc = alt;
3843 }
3844 } else {
3845 *has_dvb = true;
3846 dev->dvb_ep_bulk = e->bEndpointAddress;
3847 }
3848 }
3849 return;
3850 case 0x85:
3851 if (usb_endpoint_xfer_isoc(e)) {
3852 if (size > dev->dvb_max_pkt_size_isoc_ts2) {
3853 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress;
3854 dev->dvb_max_pkt_size_isoc_ts2 = size;
3855 dev->dvb_alt_isoc = alt;
3856 }
3857 } else {
3858 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress;
3859 }
3860 return;
3861 }
3862 }
3863
3864 /*
3865 * em28xx_usb_probe()
3866 * checks for supported devices
3867 */
3868 static int em28xx_usb_probe(struct usb_interface *intf,
3869 const struct usb_device_id *id)
3870 {
3871 struct usb_device *udev;
3872 struct em28xx *dev = NULL;
3873 int retval;
3874 bool has_vendor_audio = false, has_video = false, has_dvb = false;
3875 int i, nr, try_bulk;
3876 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber;
3877 char *speed;
3878
3879 udev = usb_get_dev(interface_to_usbdev(intf));
3880
3881 /* Check to see next free device and mark as used */
3882 do {
3883 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS);
3884 if (nr >= EM28XX_MAXBOARDS) {
3885 /* No free device slots */
3886 dev_err(&intf->dev,
3887 "Driver supports up to %i em28xx boards.\n",
3888 EM28XX_MAXBOARDS);
3889 retval = -ENOMEM;
3890 goto err_no_slot;
3891 }
3892 } while (test_and_set_bit(nr, em28xx_devused));
3893
3894 /* Don't register audio interfaces */
3895 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3896 dev_info(&intf->dev,
3897 "audio device (%04x:%04x): interface %i, class %i\n",
3898 le16_to_cpu(udev->descriptor.idVendor),
3899 le16_to_cpu(udev->descriptor.idProduct),
3900 ifnum,
3901 intf->altsetting[0].desc.bInterfaceClass);
3902
3903 retval = -ENODEV;
3904 goto err;
3905 }
3906
3907 /* allocate memory for our device state and initialize it */
3908 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3909 if (!dev) {
3910 retval = -ENOMEM;
3911 goto err;
3912 }
3913
3914 /* compute alternate max packet sizes */
3915 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting,
3916 sizeof(dev->alt_max_pkt_size_isoc[0]),
3917 GFP_KERNEL);
3918 if (!dev->alt_max_pkt_size_isoc) {
3919 kfree(dev);
3920 retval = -ENOMEM;
3921 goto err;
3922 }
3923
3924 /* Get endpoints */
3925 for (i = 0; i < intf->num_altsetting; i++) {
3926 int ep;
3927
3928 for (ep = 0;
3929 ep < intf->altsetting[i].desc.bNumEndpoints;
3930 ep++)
3931 em28xx_check_usb_descriptor(dev, udev, intf,
3932 i, ep,
3933 &has_vendor_audio,
3934 &has_video,
3935 &has_dvb);
3936 }
3937
3938 if (!(has_vendor_audio || has_video || has_dvb)) {
3939 retval = -ENODEV;
3940 goto err_free;
3941 }
3942
3943 switch (udev->speed) {
3944 case USB_SPEED_LOW:
3945 speed = "1.5";
3946 break;
3947 case USB_SPEED_UNKNOWN:
3948 case USB_SPEED_FULL:
3949 speed = "12";
3950 break;
3951 case USB_SPEED_HIGH:
3952 speed = "480";
3953 break;
3954 default:
3955 speed = "unknown";
3956 }
3957
3958 dev_info(&intf->dev,
3959 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n",
3960 udev->manufacturer ? udev->manufacturer : "",
3961 udev->product ? udev->product : "",
3962 speed,
3963 le16_to_cpu(udev->descriptor.idVendor),
3964 le16_to_cpu(udev->descriptor.idProduct),
3965 ifnum,
3966 intf->altsetting->desc.bInterfaceNumber);
3967
3968 /*
3969 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3970 * video stream wouldn't likely work, since 12 Mbps is generally
3971 * not enough even for most Digital TV streams.
3972 */
3973 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3974 dev_err(&intf->dev, "Device initialization failed.\n");
3975 dev_err(&intf->dev,
3976 "Device must be connected to a high-speed USB 2.0 port.\n");
3977 retval = -ENODEV;
3978 goto err_free;
3979 }
3980
3981 kref_init(&dev->ref);
3982
3983 dev->devno = nr;
3984 dev->model = id->driver_info;
3985 dev->alt = -1;
3986 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb);
3987 dev->has_video = has_video;
3988 dev->ifnum = ifnum;
3989
3990 dev->ts = PRIMARY_TS;
3991 snprintf(dev->name, 28, "em28xx");
3992 dev->dev_next = NULL;
3993
3994 if (has_vendor_audio) {
3995 dev_info(&intf->dev,
3996 "Audio interface %i found (Vendor Class)\n", ifnum);
3997 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR;
3998 }
3999 /* Checks if audio is provided by a USB Audio Class intf */
4000 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
4001 struct usb_interface *uif = udev->config->interface[i];
4002
4003 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
4004 if (has_vendor_audio)
4005 dev_err(&intf->dev,
4006 "em28xx: device seems to have vendor AND usb audio class interfaces !\n"
4007 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n");
4008 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS;
4009 break;
4010 }
4011 }
4012
4013 if (has_video)
4014 dev_info(&intf->dev, "Video interface %i found:%s%s\n",
4015 ifnum,
4016 dev->analog_ep_bulk ? " bulk" : "",
4017 dev->analog_ep_isoc ? " isoc" : "");
4018 if (has_dvb)
4019 dev_info(&intf->dev, "DVB interface %i found:%s%s\n",
4020 ifnum,
4021 dev->dvb_ep_bulk ? " bulk" : "",
4022 dev->dvb_ep_isoc ? " isoc" : "");
4023
4024 dev->num_alt = intf->num_altsetting;
4025
4026 if ((unsigned int)card[nr] < em28xx_bcount)
4027 dev->model = card[nr];
4028
4029 /* save our data pointer in this intf device */
4030 usb_set_intfdata(intf, dev);
4031
4032 /* allocate device struct and check if the device is a webcam */
4033 mutex_init(&dev->lock);
4034 retval = em28xx_init_dev(dev, udev, intf, nr);
4035 if (retval)
4036 goto err_free;
4037
4038 if (usb_xfer_mode < 0) {
4039 if (dev->is_webcam)
4040 try_bulk = 1;
4041 else
4042 try_bulk = 0;
4043 } else {
4044 try_bulk = usb_xfer_mode > 0;
4045 }
4046
4047 /* Disable V4L2 if the device doesn't have a decoder or image sensor */
4048 if (has_video &&
4049 dev->board.decoder == EM28XX_NODECODER &&
4050 dev->em28xx_sensor == EM28XX_NOSENSOR) {
4051 dev_err(&intf->dev,
4052 "Currently, V4L2 is not supported on this model\n");
4053 has_video = false;
4054 dev->has_video = false;
4055 }
4056
4057 if (dev->board.has_dual_ts &&
4058 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) {
4059 /*
4060 * The logic with sets alternate is not ready for dual-tuners
4061 * which analog modes.
4062 */
4063 dev_err(&intf->dev,
4064 "We currently don't support analog TV or stream capture on dual tuners.\n");
4065 has_video = false;
4066 }
4067
4068 /* Select USB transfer types to use */
4069 if (has_video) {
4070 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
4071 dev->analog_xfer_bulk = 1;
4072 dev_info(&intf->dev, "analog set to %s mode.\n",
4073 dev->analog_xfer_bulk ? "bulk" : "isoc");
4074 }
4075 if (has_dvb) {
4076 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk))
4077 dev->dvb_xfer_bulk = 1;
4078 dev_info(&intf->dev, "dvb set to %s mode.\n",
4079 dev->dvb_xfer_bulk ? "bulk" : "isoc");
4080 }
4081
4082 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) {
4083 kref_init(&dev->dev_next->ref);
4084
4085 dev->dev_next->ts = SECONDARY_TS;
4086 dev->dev_next->alt = -1;
4087 dev->dev_next->is_audio_only = has_vendor_audio &&
4088 !(has_video || has_dvb);
4089 dev->dev_next->has_video = false;
4090 dev->dev_next->ifnum = ifnum;
4091 dev->dev_next->model = id->driver_info;
4092
4093 mutex_init(&dev->dev_next->lock);
4094 retval = em28xx_init_dev(dev->dev_next, udev, intf,
4095 dev->dev_next->devno);
4096 if (retval)
4097 goto err_free;
4098
4099 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */
4100 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */
4101
4102 if (usb_xfer_mode < 0) {
4103 if (dev->dev_next->is_webcam)
4104 try_bulk = 1;
4105 else
4106 try_bulk = 0;
4107 } else {
4108 try_bulk = usb_xfer_mode > 0;
4109 }
4110
4111 /* Select USB transfer types to use */
4112 if (has_dvb) {
4113 if (!dev->dvb_ep_isoc_ts2 ||
4114 (try_bulk && dev->dvb_ep_bulk_ts2))
4115 dev->dev_next->dvb_xfer_bulk = 1;
4116 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n",
4117 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc");
4118 }
4119
4120 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2;
4121 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2;
4122 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2;
4123 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc;
4124
4125 /* Configure hardware to support TS2*/
4126 if (dev->dvb_xfer_bulk) {
4127 /* The ep4 and ep5 are configured for BULK */
4128 em28xx_write_reg(dev, 0x0b, 0x96);
4129 mdelay(100);
4130 em28xx_write_reg(dev, 0x0b, 0x80);
4131 mdelay(100);
4132 } else {
4133 /* The ep4 and ep5 are configured for ISO */
4134 em28xx_write_reg(dev, 0x0b, 0x96);
4135 mdelay(100);
4136 em28xx_write_reg(dev, 0x0b, 0x82);
4137 mdelay(100);
4138 }
4139 }
4140
4141 request_modules(dev);
4142
4143 /*
4144 * Do it at the end, to reduce dynamic configuration changes during
4145 * the device init. Yet, as request_modules() can be async, the
4146 * topology will likely change after the load of the em28xx subdrivers.
4147 */
4148 #ifdef CONFIG_MEDIA_CONTROLLER
4149 /*
4150 * No need to check the return value, the device will still be
4151 * usable without media controller API.
4152 */
4153 retval = media_device_register(dev->media_dev);
4154 #endif
4155
4156 return 0;
4157
4158 err_free:
4159 kfree(dev->alt_max_pkt_size_isoc);
4160 kfree(dev);
4161
4162 err:
4163 clear_bit(nr, em28xx_devused);
4164
4165 err_no_slot:
4166 usb_put_dev(udev);
4167 return retval;
4168 }
4169
4170 /*
4171 * em28xx_usb_disconnect()
4172 * called when the device gets disconnected
4173 * video device will be unregistered on v4l2_close in case it is still open
4174 */
4175 static void em28xx_usb_disconnect(struct usb_interface *intf)
4176 {
4177 struct em28xx *dev;
4178
4179 dev = usb_get_intfdata(intf);
4180 usb_set_intfdata(intf, NULL);
4181
4182 if (!dev)
4183 return;
4184
4185 if (dev->dev_next) {
4186 dev->dev_next->disconnected = 1;
4187 dev_info(&dev->intf->dev, "Disconnecting %s\n",
4188 dev->dev_next->name);
4189 }
4190
4191 dev->disconnected = 1;
4192
4193 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name);
4194
4195 flush_request_modules(dev);
4196
4197 em28xx_close_extension(dev);
4198
4199 if (dev->dev_next)
4200 em28xx_release_resources(dev->dev_next);
4201 em28xx_release_resources(dev);
4202
4203 if (dev->dev_next) {
4204 kref_put(&dev->dev_next->ref, em28xx_free_device);
4205 dev->dev_next = NULL;
4206 }
4207 kref_put(&dev->ref, em28xx_free_device);
4208 }
4209
4210 static int em28xx_usb_suspend(struct usb_interface *intf,
4211 pm_message_t message)
4212 {
4213 struct em28xx *dev;
4214
4215 dev = usb_get_intfdata(intf);
4216 if (!dev)
4217 return 0;
4218 em28xx_suspend_extension(dev);
4219 return 0;
4220 }
4221
4222 static int em28xx_usb_resume(struct usb_interface *intf)
4223 {
4224 struct em28xx *dev;
4225
4226 dev = usb_get_intfdata(intf);
4227 if (!dev)
4228 return 0;
4229 em28xx_resume_extension(dev);
4230 return 0;
4231 }
4232
4233 static struct usb_driver em28xx_usb_driver = {
4234 .name = "em28xx",
4235 .probe = em28xx_usb_probe,
4236 .disconnect = em28xx_usb_disconnect,
4237 .suspend = em28xx_usb_suspend,
4238 .resume = em28xx_usb_resume,
4239 .reset_resume = em28xx_usb_resume,
4240 .id_table = em28xx_id_table,
4241 };
4242
4243 module_usb_driver(em28xx_usb_driver);
Kernel DRM miscellaneous fixes and cross-tree changes