drm/rockchip: Don't change hdmi reference clock rate
[drm/drm-misc.git] / drivers / net / ethernet / cisco / enic / vnic_devcmd.h
blobdb56d778877a73b0ef2adf59120cbc57999732ee
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Copyright 2008-2010 Cisco Systems, Inc. All rights reserved.
4 * Copyright 2007 Nuova Systems, Inc. All rights reserved.
5 */
7 #ifndef _VNIC_DEVCMD_H_
8 #define _VNIC_DEVCMD_H_
10 #define _CMD_NBITS 14
11 #define _CMD_VTYPEBITS 10
12 #define _CMD_FLAGSBITS 6
13 #define _CMD_DIRBITS 2
15 #define _CMD_NMASK ((1 << _CMD_NBITS)-1)
16 #define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1)
17 #define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1)
18 #define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1)
20 #define _CMD_NSHIFT 0
21 #define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
22 #define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
23 #define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
26 * Direction bits (from host perspective).
28 #define _CMD_DIR_NONE 0U
29 #define _CMD_DIR_WRITE 1U
30 #define _CMD_DIR_READ 2U
31 #define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ)
34 * Flag bits.
36 #define _CMD_FLAGS_NONE 0U
37 #define _CMD_FLAGS_NOWAIT 1U
40 * vNIC type bits.
42 #define _CMD_VTYPE_NONE 0U
43 #define _CMD_VTYPE_ENET 1U
44 #define _CMD_VTYPE_FC 2U
45 #define _CMD_VTYPE_SCSI 4U
46 #define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
49 * Used to create cmds..
51 #define _CMDCF(dir, flags, vtype, nr) \
52 (((dir) << _CMD_DIRSHIFT) | \
53 ((flags) << _CMD_FLAGSSHIFT) | \
54 ((vtype) << _CMD_VTYPESHIFT) | \
55 ((nr) << _CMD_NSHIFT))
56 #define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr)
57 #define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
60 * Used to decode cmds..
62 #define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
63 #define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
64 #define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
65 #define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
67 enum vnic_devcmd_cmd {
68 CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
71 * mcpu fw info in mem:
72 * in:
73 * (u64)a0=paddr to struct vnic_devcmd_fw_info
74 * action:
75 * Fills in struct vnic_devcmd_fw_info (128 bytes)
76 * note:
77 * An old definition of CMD_MCPU_FW_INFO
79 CMD_MCPU_FW_INFO_OLD = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
82 * mcpu fw info in mem:
83 * in:
84 * (u64)a0=paddr to struct vnic_devcmd_fw_info
85 * (u16)a1=size of the structure
86 * out:
87 * (u16)a1=0 for in:a1 = 0,
88 * data size actually written for other values.
89 * action:
90 * Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0,
91 * first in:a1 bytes for 0 < in:a1 <= 132,
92 * 132 bytes for other values of in:a1.
93 * note:
94 * CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1
95 * for source compatibility.
97 CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1),
99 /* dev-specific block member:
100 * in: (u16)a0=offset,(u8)a1=size
101 * out: a0=value */
102 CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
104 /* stats clear */
105 CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
107 /* stats dump in mem: (u64)a0=paddr to stats area,
108 * (u16)a1=sizeof stats area */
109 CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
111 /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
112 CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
114 /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */
115 CMD_PACKET_FILTER_ALL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7),
117 /* hang detection notification */
118 CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
120 /* MAC address in (u48)a0 */
121 CMD_GET_MAC_ADDR = _CMDC(_CMD_DIR_READ,
122 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
124 /* add addr from (u48)a0 */
125 CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE,
126 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
128 /* del addr from (u48)a0 */
129 CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE,
130 _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
132 /* add VLAN id in (u16)a0 */
133 CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
135 /* del VLAN id in (u16)a0 */
136 CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
138 /* nic_cfg (no wait, always succeeds)
139 * in: (u32)a0
141 * Capability query:
142 * out: (u64) a0 = 1 if a1 is valid
143 * (u64) a1 = (NIC_CFG bits supported) | (flags << 32)
145 * flags are CMD_NIC_CFG_CAPF_xxx
147 CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
148 /* nic_cfg_chk (will return error if flags are invalid)
149 * in: (u32)a0
151 * Capability query:
152 * out: (u64) a0 = 1 if a1 is valid
153 * (u64) a1 = (NIC_CFG bits supported) | (flags << 32)
155 * flags are CMD_NIC_CFG_CAPF_xxx
157 CMD_NIC_CFG_CHK = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
159 /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
160 CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
162 /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
163 CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
165 /* initiate softreset */
166 CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
168 /* softreset status:
169 * out: a0=0 reset complete, a0=1 reset in progress */
170 CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
172 /* set struct vnic_devcmd_notify buffer in mem:
173 * in:
174 * (u64)a0=paddr to notify (set paddr=0 to unset)
175 * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
176 * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
177 * out:
178 * (u32)a1 = effective size
180 CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
182 /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
183 * (u8)a1=PXENV_UNDI_xxx */
184 CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
186 /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
187 CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
189 /* open status:
190 * out: a0=0 open complete, a0=1 open in progress */
191 CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
193 /* close vnic */
194 CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
196 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
197 /***** Replaced by CMD_INIT *****/
198 CMD_INIT_v1 = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
200 /* variant of CMD_INIT, with provisioning info
201 * (u64)a0=paddr of vnic_devcmd_provinfo
202 * (u32)a1=sizeof provision info */
203 CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
205 /* enable virtual link */
206 CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
208 /* enable virtual link, waiting variant. */
209 CMD_ENABLE_WAIT = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
211 /* disable virtual link */
212 CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
214 /* stats dump sum of all vnic stats on same uplink in mem:
215 * (u64)a0=paddr
216 * (u16)a1=sizeof stats area */
217 CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
219 /* init status:
220 * out: a0=0 init complete, a0=1 init in progress
221 * if a0=0, a1=errno */
222 CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
224 /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
225 * (u32)a1=INT13_CMD_xxx */
226 CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
228 /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
229 CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
231 /* undo initialize of virtual link */
232 CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
234 /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
235 CMD_INIT = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35),
237 /* check fw capability of a cmd:
238 * in: (u32)a0=cmd
239 * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */
240 CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36),
242 /* persistent binding info
243 * in: (u64)a0=paddr of arg
244 * (u32)a1=CMD_PERBI_XXX */
245 CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37),
247 /* Interrupt Assert Register functionality
248 * in: (u16)a0=interrupt number to assert
250 CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38),
252 /* initiate hangreset, like softreset after hang detected */
253 CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39),
255 /* hangreset status:
256 * out: a0=0 reset complete, a0=1 reset in progress */
257 CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40),
260 * Set hw ingress packet vlan rewrite mode:
261 * in: (u32)a0=new vlan rewrite mode
262 * out: (u32)a0=old vlan rewrite mode */
263 CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41),
266 * in: (u16)a0=bdf of target vnic
267 * (u32)a1=cmd to proxy
268 * a2-a15=args to cmd in a1
269 * out: (u32)a0=status of proxied cmd
270 * a1-a15=out args of proxied cmd */
271 CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42),
274 * As for BY_BDF except a0 is index of hvnlink subordinate vnic
275 * or SR-IOV virtual vnic
277 CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43),
280 * For HPP toggle:
281 * adapter-info-get
282 * in: (u64)a0=phsical address of buffer passed in from caller.
283 * (u16)a1=size of buffer specified in a0.
284 * out: (u64)a0=phsical address of buffer passed in from caller.
285 * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or
286 * 0 if no VIF-CONFIG-INFO TLV was ever received. */
287 CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44),
289 /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
290 * (u32)a1=INT13_CMD_xxx
292 CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45),
294 /* Set default vlan:
295 * in: (u16)a0=new default vlan
296 * (u16)a1=zero for overriding vlan with param a0,
297 * non-zero for resetting vlan to the default
298 * out: (u16)a0=old default vlan
300 CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46),
302 /* init_prov_info2:
303 * Variant of CMD_INIT_PROV_INFO, where it will not try to enable
304 * the vnic until CMD_ENABLE2 is issued.
305 * (u64)a0=paddr of vnic_devcmd_provinfo
306 * (u32)a1=sizeof provision info
308 CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47),
310 /* enable2:
311 * (u32)a0=0 ==> standby
312 * =CMD_ENABLE2_ACTIVE ==> active
314 CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48),
317 * cmd_status:
318 * Returns the status of the specified command
319 * Input:
320 * a0 = command for which status is being queried.
321 * Possible values are:
322 * CMD_SOFT_RESET
323 * CMD_HANG_RESET
324 * CMD_OPEN
325 * CMD_INIT
326 * CMD_INIT_PROV_INFO
327 * CMD_DEINIT
328 * CMD_INIT_PROV_INFO2
329 * CMD_ENABLE2
330 * Output:
331 * if status == STAT_ERROR
332 * a0 = ERR_ENOTSUPPORTED - status for command in a0 is
333 * not supported
334 * if status == STAT_NONE
335 * a0 = status of the devcmd specified in a0 as follows.
336 * ERR_SUCCESS - command in a0 completed successfully
337 * ERR_EINPROGRESS - command in a0 is still in progress
339 CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49),
342 * Returns interrupt coalescing timer conversion factors.
343 * After calling this devcmd, ENIC driver can convert
344 * interrupt coalescing timer in usec into CPU cycles as follows:
346 * intr_timer_cycles = intr_timer_usec * multiplier / divisor
348 * Interrupt coalescing timer in usecs can be obtained from
349 * CPU cycles as follows:
351 * intr_timer_usec = intr_timer_cycles * divisor / multiplier
353 * in: none
354 * out: (u32)a0 = multiplier
355 * (u32)a1 = divisor
356 * (u32)a2 = maximum timer value in usec
358 CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50),
361 * Set the predefined mac address as default
362 * in:
363 * (u48)a0 = mac addr
365 CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55),
367 /* Update the provisioning info of the given VIF
368 * (u64)a0=paddr of vnic_devcmd_provinfo
369 * (u32)a1=sizeof provision info
371 CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56),
373 /* Initialization for the devcmd2 interface.
374 * in: (u64) a0 = host result buffer physical address
375 * in: (u16) a1 = number of entries in result buffer
377 CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57),
379 /* Add a filter.
380 * in: (u64) a0= filter address
381 * (u32) a1= size of filter
382 * out: (u32) a0=filter identifier
384 CMD_ADD_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 58),
386 /* Delete a filter.
387 * in: (u32) a0=filter identifier
389 CMD_DEL_FILTER = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 59),
391 /* Enable a Queue Pair in User space NIC
392 * in: (u32) a0=Queue Pair number
393 * (u32) a1= command
395 CMD_QP_ENABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 60),
397 /* Disable a Queue Pair in User space NIC
398 * in: (u32) a0=Queue Pair number
399 * (u32) a1= command
401 CMD_QP_DISABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 61),
403 /* Stats dump Queue Pair in User space NIC
404 * in: (u32) a0=Queue Pair number
405 * (u64) a1=host buffer addr for status dump
406 * (u32) a2=length of the buffer
408 CMD_QP_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 62),
410 /* Clear stats for Queue Pair in User space NIC
411 * in: (u32) a0=Queue Pair number
413 CMD_QP_STATS_CLEAR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 63),
415 /* Use this devcmd for agreeing on the highest common version supported
416 * by both driver and fw for features who need such a facility.
417 * in: (u64) a0 = feature (driver requests for the supported versions
418 * on this feature)
419 * out: (u64) a0 = bitmap of all supported versions for that feature
421 CMD_GET_SUPP_FEATURE_VER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 69),
423 /* Control (Enable/Disable) overlay offloads on the given vnic
424 * in: (u8) a0 = OVERLAY_FEATURE_NVGRE : NVGRE
425 * a0 = OVERLAY_FEATURE_VXLAN : VxLAN
426 * in: (u8) a1 = OVERLAY_OFFLOAD_ENABLE : Enable or
427 * a1 = OVERLAY_OFFLOAD_DISABLE : Disable or
428 * a1 = OVERLAY_OFFLOAD_ENABLE_V2 : Enable with version 2
430 CMD_OVERLAY_OFFLOAD_CTRL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 72),
432 /* Configuration of overlay offloads feature on a given vNIC
433 * in: (u8) a0 = DEVCMD_OVERLAY_NVGRE : NVGRE
434 * a0 = DEVCMD_OVERLAY_VXLAN : VxLAN
435 * in: (u8) a1 = VXLAN_PORT_UPDATE : VxLAN
436 * in: (u16) a2 = unsigned short int port information
438 CMD_OVERLAY_OFFLOAD_CFG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 73),
441 /* CMD_ENABLE2 flags */
442 #define CMD_ENABLE2_STANDBY 0x0
443 #define CMD_ENABLE2_ACTIVE 0x1
445 /* flags for CMD_OPEN */
446 #define CMD_OPENF_OPROM 0x1 /* open coming from option rom */
447 #define CMD_OPENF_IG_DESCCACHE 0x2 /* Do not flush IG DESC cache */
449 /* flags for CMD_INIT */
450 #define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */
452 /* flags for CMD_PACKET_FILTER */
453 #define CMD_PFILTER_DIRECTED 0x01
454 #define CMD_PFILTER_MULTICAST 0x02
455 #define CMD_PFILTER_BROADCAST 0x04
456 #define CMD_PFILTER_PROMISCUOUS 0x08
457 #define CMD_PFILTER_ALL_MULTICAST 0x10
459 /* Commands for CMD_QP_ENABLE/CM_QP_DISABLE */
460 #define CMD_QP_RQWQ 0x0
462 /* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */
463 #define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK 0
464 #define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN 1
465 #define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN 2
466 #define IG_VLAN_REWRITE_MODE_PASS_THRU 3
468 enum vnic_devcmd_status {
469 STAT_NONE = 0,
470 STAT_BUSY = 1 << 0, /* cmd in progress */
471 STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */
474 enum vnic_devcmd_error {
475 ERR_SUCCESS = 0,
476 ERR_EINVAL = 1,
477 ERR_EFAULT = 2,
478 ERR_EPERM = 3,
479 ERR_EBUSY = 4,
480 ERR_ECMDUNKNOWN = 5,
481 ERR_EBADSTATE = 6,
482 ERR_ENOMEM = 7,
483 ERR_ETIMEDOUT = 8,
484 ERR_ELINKDOWN = 9,
485 ERR_EMAXRES = 10,
486 ERR_ENOTSUPPORTED = 11,
487 ERR_EINPROGRESS = 12,
488 ERR_MAX
492 * note: hw_version and asic_rev refer to the same thing,
493 * but have different formats. hw_version is
494 * a 32-byte string (e.g. "A2") and asic_rev is
495 * a 16-bit integer (e.g. 0xA2).
497 struct vnic_devcmd_fw_info {
498 char fw_version[32];
499 char fw_build[32];
500 char hw_version[32];
501 char hw_serial_number[32];
502 u16 asic_type;
503 u16 asic_rev;
506 struct vnic_devcmd_notify {
507 u32 csum; /* checksum over following words */
509 u32 link_state; /* link up == 1 */
510 u32 port_speed; /* effective port speed (rate limit) */
511 u32 mtu; /* MTU */
512 u32 msglvl; /* requested driver msg lvl */
513 u32 uif; /* uplink interface */
514 u32 status; /* status bits (see VNIC_STF_*) */
515 u32 error; /* error code (see ERR_*) for first ERR */
516 u32 link_down_cnt; /* running count of link down transitions */
517 u32 perbi_rebuild_cnt; /* running count of perbi rebuilds */
519 #define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */
520 #define VNIC_STF_STD_PAUSE 0x0002 /* standard link-level pause on */
521 #define VNIC_STF_PFC_PAUSE 0x0004 /* priority flow control pause on */
522 /* all supported status flags */
523 #define VNIC_STF_ALL (VNIC_STF_FATAL_ERR |\
524 VNIC_STF_STD_PAUSE |\
525 VNIC_STF_PFC_PAUSE |\
528 struct vnic_devcmd_provinfo {
529 u8 oui[3];
530 u8 type;
531 u8 data[];
534 /* These are used in flags field of different filters to denote
535 * valid fields used.
537 #define FILTER_FIELD_VALID(fld) (1 << (fld - 1))
539 #define FILTER_FIELDS_USNIC ( \
540 FILTER_FIELD_VALID(1) | \
541 FILTER_FIELD_VALID(2) | \
542 FILTER_FIELD_VALID(3) | \
543 FILTER_FIELD_VALID(4))
545 #define FILTER_FIELDS_IPV4_5TUPLE ( \
546 FILTER_FIELD_VALID(1) | \
547 FILTER_FIELD_VALID(2) | \
548 FILTER_FIELD_VALID(3) | \
549 FILTER_FIELD_VALID(4) | \
550 FILTER_FIELD_VALID(5))
552 #define FILTER_FIELDS_MAC_VLAN ( \
553 FILTER_FIELD_VALID(1) | \
554 FILTER_FIELD_VALID(2))
556 #define FILTER_FIELD_USNIC_VLAN FILTER_FIELD_VALID(1)
557 #define FILTER_FIELD_USNIC_ETHTYPE FILTER_FIELD_VALID(2)
558 #define FILTER_FIELD_USNIC_PROTO FILTER_FIELD_VALID(3)
559 #define FILTER_FIELD_USNIC_ID FILTER_FIELD_VALID(4)
561 struct filter_usnic_id {
562 u32 flags;
563 u16 vlan;
564 u16 ethtype;
565 u8 proto_version;
566 u32 usnic_id;
567 } __packed;
569 #define FILTER_FIELD_5TUP_PROTO FILTER_FIELD_VALID(1)
570 #define FILTER_FIELD_5TUP_SRC_AD FILTER_FIELD_VALID(2)
571 #define FILTER_FIELD_5TUP_DST_AD FILTER_FIELD_VALID(3)
572 #define FILTER_FIELD_5TUP_SRC_PT FILTER_FIELD_VALID(4)
573 #define FILTER_FIELD_5TUP_DST_PT FILTER_FIELD_VALID(5)
575 /* Enums for the protocol field. */
576 enum protocol_e {
577 PROTO_UDP = 0,
578 PROTO_TCP = 1,
581 struct filter_ipv4_5tuple {
582 u32 flags;
583 u32 protocol;
584 u32 src_addr;
585 u32 dst_addr;
586 u16 src_port;
587 u16 dst_port;
588 } __packed;
590 #define FILTER_FIELD_VMQ_VLAN FILTER_FIELD_VALID(1)
591 #define FILTER_FIELD_VMQ_MAC FILTER_FIELD_VALID(2)
593 struct filter_mac_vlan {
594 u32 flags;
595 u16 vlan;
596 u8 mac_addr[6];
597 } __packed;
599 /* Specifies the filter_action type. */
600 enum {
601 FILTER_ACTION_RQ_STEERING = 0,
602 FILTER_ACTION_MAX
605 struct filter_action {
606 u32 type;
607 union {
608 u32 rq_idx;
609 } u;
610 } __packed;
612 /* Specifies the filter type. */
613 enum filter_type {
614 FILTER_USNIC_ID = 0,
615 FILTER_IPV4_5TUPLE = 1,
616 FILTER_MAC_VLAN = 2,
617 FILTER_MAX
620 struct filter {
621 u32 type;
622 union {
623 struct filter_usnic_id usnic;
624 struct filter_ipv4_5tuple ipv4;
625 struct filter_mac_vlan mac_vlan;
626 } u;
627 } __packed;
629 enum {
630 CLSF_TLV_FILTER = 0,
631 CLSF_TLV_ACTION = 1,
634 /* Maximum size of buffer to CMD_ADD_FILTER */
635 #define FILTER_MAX_BUF_SIZE 100
637 struct filter_tlv {
638 u32 type;
639 u32 length;
640 u32 val[];
643 enum {
644 CLSF_ADD = 0,
645 CLSF_DEL = 1,
649 * Writing cmd register causes STAT_BUSY to get set in status register.
650 * When cmd completes, STAT_BUSY will be cleared.
652 * If cmd completed successfully STAT_ERROR will be clear
653 * and args registers contain cmd-specific results.
655 * If cmd error, STAT_ERROR will be set and args[0] contains error code.
657 * status register is read-only. While STAT_BUSY is set,
658 * all other register contents are read-only.
661 /* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
662 #define VNIC_DEVCMD_NARGS 15
663 struct vnic_devcmd {
664 u32 status; /* RO */
665 u32 cmd; /* RW */
666 u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */
669 #define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */
671 #define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS
672 struct vnic_devcmd2 {
673 u16 pad;
674 u16 flags;
675 u32 cmd;
676 u64 args[VNIC_DEVCMD2_NARGS];
679 #define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS
680 struct devcmd2_result {
681 u64 results[VNIC_DEVCMD2_NRESULTS];
682 u32 pad;
683 u16 completed_index;
684 u8 error;
685 u8 color;
688 #define DEVCMD2_RING_SIZE 32
689 #define DEVCMD2_DESC_SIZE 128
691 enum overlay_feature_t {
692 OVERLAY_FEATURE_NVGRE = 1,
693 OVERLAY_FEATURE_VXLAN,
694 OVERLAY_FEATURE_MAX,
697 enum overlay_ofld_cmd {
698 OVERLAY_OFFLOAD_ENABLE,
699 OVERLAY_OFFLOAD_DISABLE,
700 OVERLAY_OFFLOAD_ENABLE_P2,
701 OVERLAY_OFFLOAD_MAX,
704 #define OVERLAY_CFG_VXLAN_PORT_UPDATE 0
706 #define ENIC_VXLAN_INNER_IPV6 BIT(0)
707 #define ENIC_VXLAN_OUTER_IPV6 BIT(1)
708 #define ENIC_VXLAN_MULTI_WQ BIT(2)
710 /* Use this enum to get the supported versions for each of these features
711 * If you need to use the devcmd_get_supported_feature_version(), add
712 * the new feature into this enum and install function handler in devcmd.c
714 enum vic_feature_t {
715 VIC_FEATURE_VXLAN,
716 VIC_FEATURE_RDMA,
717 VIC_FEATURE_VXLAN_PATCH,
718 VIC_FEATURE_MAX,
721 #endif /* _VNIC_DEVCMD_H_ */