drm: bridge: adv7511: remove s32 format from i2s capabilities
[drm/drm-misc.git] / drivers / net / wireless / ath / ath10k / hw.c
blob8fafe096adff53494ca963c91099da8c5fcb6a48
1 // SPDX-License-Identifier: ISC
2 /*
3 * Copyright (c) 2014-2017 Qualcomm Atheros, Inc.
4 * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
5 */
7 #include <linux/types.h>
8 #include <linux/bitops.h>
9 #include <linux/bitfield.h>
10 #include "core.h"
11 #include "hw.h"
12 #include "hif.h"
13 #include "wmi-ops.h"
14 #include "bmi.h"
15 #include "rx_desc.h"
17 const struct ath10k_hw_regs qca988x_regs = {
18 .rtc_soc_base_address = 0x00004000,
19 .rtc_wmac_base_address = 0x00005000,
20 .soc_core_base_address = 0x00009000,
21 .wlan_mac_base_address = 0x00020000,
22 .ce_wrapper_base_address = 0x00057000,
23 .ce0_base_address = 0x00057400,
24 .ce1_base_address = 0x00057800,
25 .ce2_base_address = 0x00057c00,
26 .ce3_base_address = 0x00058000,
27 .ce4_base_address = 0x00058400,
28 .ce5_base_address = 0x00058800,
29 .ce6_base_address = 0x00058c00,
30 .ce7_base_address = 0x00059000,
31 .soc_reset_control_si0_rst_mask = 0x00000001,
32 .soc_reset_control_ce_rst_mask = 0x00040000,
33 .soc_chip_id_address = 0x000000ec,
34 .scratch_3_address = 0x00000030,
35 .fw_indicator_address = 0x00009030,
36 .pcie_local_base_address = 0x00080000,
37 .ce_wrap_intr_sum_host_msi_lsb = 0x00000008,
38 .ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,
39 .pcie_intr_fw_mask = 0x00000400,
40 .pcie_intr_ce_mask_all = 0x0007f800,
41 .pcie_intr_clr_address = 0x00000014,
44 const struct ath10k_hw_regs qca6174_regs = {
45 .rtc_soc_base_address = 0x00000800,
46 .rtc_wmac_base_address = 0x00001000,
47 .soc_core_base_address = 0x0003a000,
48 .wlan_mac_base_address = 0x00010000,
49 .ce_wrapper_base_address = 0x00034000,
50 .ce0_base_address = 0x00034400,
51 .ce1_base_address = 0x00034800,
52 .ce2_base_address = 0x00034c00,
53 .ce3_base_address = 0x00035000,
54 .ce4_base_address = 0x00035400,
55 .ce5_base_address = 0x00035800,
56 .ce6_base_address = 0x00035c00,
57 .ce7_base_address = 0x00036000,
58 .soc_reset_control_si0_rst_mask = 0x00000000,
59 .soc_reset_control_ce_rst_mask = 0x00000001,
60 .soc_chip_id_address = 0x000000f0,
61 .scratch_3_address = 0x00000028,
62 .fw_indicator_address = 0x0003a028,
63 .pcie_local_base_address = 0x00080000,
64 .ce_wrap_intr_sum_host_msi_lsb = 0x00000008,
65 .ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,
66 .pcie_intr_fw_mask = 0x00000400,
67 .pcie_intr_ce_mask_all = 0x0007f800,
68 .pcie_intr_clr_address = 0x00000014,
69 .cpu_pll_init_address = 0x00404020,
70 .cpu_speed_address = 0x00404024,
71 .core_clk_div_address = 0x00404028,
74 const struct ath10k_hw_regs qca99x0_regs = {
75 .rtc_soc_base_address = 0x00080000,
76 .rtc_wmac_base_address = 0x00000000,
77 .soc_core_base_address = 0x00082000,
78 .wlan_mac_base_address = 0x00030000,
79 .ce_wrapper_base_address = 0x0004d000,
80 .ce0_base_address = 0x0004a000,
81 .ce1_base_address = 0x0004a400,
82 .ce2_base_address = 0x0004a800,
83 .ce3_base_address = 0x0004ac00,
84 .ce4_base_address = 0x0004b000,
85 .ce5_base_address = 0x0004b400,
86 .ce6_base_address = 0x0004b800,
87 .ce7_base_address = 0x0004bc00,
88 /* Note: qca99x0 supports up to 12 Copy Engines. Other than address of
89 * CE0 and CE1 no other copy engine is directly referred in the code.
90 * It is not really necessary to assign address for newly supported
91 * CEs in this address table.
92 * Copy Engine Address
93 * CE8 0x0004c000
94 * CE9 0x0004c400
95 * CE10 0x0004c800
96 * CE11 0x0004cc00
98 .soc_reset_control_si0_rst_mask = 0x00000001,
99 .soc_reset_control_ce_rst_mask = 0x00000100,
100 .soc_chip_id_address = 0x000000ec,
101 .scratch_3_address = 0x00040050,
102 .fw_indicator_address = 0x00040050,
103 .pcie_local_base_address = 0x00000000,
104 .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
105 .ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
106 .pcie_intr_fw_mask = 0x00100000,
107 .pcie_intr_ce_mask_all = 0x000fff00,
108 .pcie_intr_clr_address = 0x00000010,
111 const struct ath10k_hw_regs qca4019_regs = {
112 .rtc_soc_base_address = 0x00080000,
113 .soc_core_base_address = 0x00082000,
114 .wlan_mac_base_address = 0x00030000,
115 .ce_wrapper_base_address = 0x0004d000,
116 .ce0_base_address = 0x0004a000,
117 .ce1_base_address = 0x0004a400,
118 .ce2_base_address = 0x0004a800,
119 .ce3_base_address = 0x0004ac00,
120 .ce4_base_address = 0x0004b000,
121 .ce5_base_address = 0x0004b400,
122 .ce6_base_address = 0x0004b800,
123 .ce7_base_address = 0x0004bc00,
124 /* qca4019 supports up to 12 copy engines. Since base address
125 * of ce8 to ce11 are not directly referred in the code,
126 * no need have them in separate members in this table.
127 * Copy Engine Address
128 * CE8 0x0004c000
129 * CE9 0x0004c400
130 * CE10 0x0004c800
131 * CE11 0x0004cc00
133 .soc_reset_control_si0_rst_mask = 0x00000001,
134 .soc_reset_control_ce_rst_mask = 0x00000100,
135 .soc_chip_id_address = 0x000000ec,
136 .fw_indicator_address = 0x0004f00c,
137 .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
138 .ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
139 .pcie_intr_fw_mask = 0x00100000,
140 .pcie_intr_ce_mask_all = 0x000fff00,
141 .pcie_intr_clr_address = 0x00000010,
144 const struct ath10k_hw_values qca988x_values = {
145 .rtc_state_val_on = 3,
146 .ce_count = 8,
147 .msi_assign_ce_max = 7,
148 .num_target_ce_config_wlan = 7,
149 .ce_desc_meta_data_mask = 0xFFFC,
150 .ce_desc_meta_data_lsb = 2,
153 const struct ath10k_hw_values qca6174_values = {
154 .rtc_state_val_on = 3,
155 .ce_count = 8,
156 .msi_assign_ce_max = 7,
157 .num_target_ce_config_wlan = 7,
158 .ce_desc_meta_data_mask = 0xFFFC,
159 .ce_desc_meta_data_lsb = 2,
160 .rfkill_pin = 16,
161 .rfkill_cfg = 0,
162 .rfkill_on_level = 1,
165 const struct ath10k_hw_values qca99x0_values = {
166 .rtc_state_val_on = 7,
167 .ce_count = 12,
168 .msi_assign_ce_max = 12,
169 .num_target_ce_config_wlan = 10,
170 .ce_desc_meta_data_mask = 0xFFF0,
171 .ce_desc_meta_data_lsb = 4,
174 const struct ath10k_hw_values qca9888_values = {
175 .rtc_state_val_on = 3,
176 .ce_count = 12,
177 .msi_assign_ce_max = 12,
178 .num_target_ce_config_wlan = 10,
179 .ce_desc_meta_data_mask = 0xFFF0,
180 .ce_desc_meta_data_lsb = 4,
183 const struct ath10k_hw_values qca4019_values = {
184 .ce_count = 12,
185 .num_target_ce_config_wlan = 10,
186 .ce_desc_meta_data_mask = 0xFFF0,
187 .ce_desc_meta_data_lsb = 4,
190 const struct ath10k_hw_regs wcn3990_regs = {
191 .rtc_soc_base_address = 0x00000000,
192 .rtc_wmac_base_address = 0x00000000,
193 .soc_core_base_address = 0x00000000,
194 .ce_wrapper_base_address = 0x0024C000,
195 .ce0_base_address = 0x00240000,
196 .ce1_base_address = 0x00241000,
197 .ce2_base_address = 0x00242000,
198 .ce3_base_address = 0x00243000,
199 .ce4_base_address = 0x00244000,
200 .ce5_base_address = 0x00245000,
201 .ce6_base_address = 0x00246000,
202 .ce7_base_address = 0x00247000,
203 .ce8_base_address = 0x00248000,
204 .ce9_base_address = 0x00249000,
205 .ce10_base_address = 0x0024A000,
206 .ce11_base_address = 0x0024B000,
207 .soc_chip_id_address = 0x000000f0,
208 .soc_reset_control_si0_rst_mask = 0x00000001,
209 .soc_reset_control_ce_rst_mask = 0x00000100,
210 .ce_wrap_intr_sum_host_msi_lsb = 0x0000000c,
211 .ce_wrap_intr_sum_host_msi_mask = 0x00fff000,
212 .pcie_intr_fw_mask = 0x00100000,
215 static struct ath10k_hw_ce_regs_addr_map wcn3990_src_ring = {
216 .msb = 0x00000010,
217 .lsb = 0x00000010,
218 .mask = GENMASK(17, 17),
221 static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_ring = {
222 .msb = 0x00000012,
223 .lsb = 0x00000012,
224 .mask = GENMASK(18, 18),
227 static struct ath10k_hw_ce_regs_addr_map wcn3990_dmax = {
228 .msb = 0x00000000,
229 .lsb = 0x00000000,
230 .mask = GENMASK(15, 0),
233 static struct ath10k_hw_ce_ctrl1 wcn3990_ctrl1 = {
234 .addr = 0x00000018,
235 .src_ring = &wcn3990_src_ring,
236 .dst_ring = &wcn3990_dst_ring,
237 .dmax = &wcn3990_dmax,
240 static struct ath10k_hw_ce_regs_addr_map wcn3990_host_ie_cc = {
241 .mask = GENMASK(0, 0),
244 static struct ath10k_hw_ce_host_ie wcn3990_host_ie = {
245 .copy_complete = &wcn3990_host_ie_cc,
248 static struct ath10k_hw_ce_host_wm_regs wcn3990_wm_reg = {
249 .dstr_lmask = 0x00000010,
250 .dstr_hmask = 0x00000008,
251 .srcr_lmask = 0x00000004,
252 .srcr_hmask = 0x00000002,
253 .cc_mask = 0x00000001,
254 .wm_mask = 0x0000001E,
255 .addr = 0x00000030,
258 static struct ath10k_hw_ce_misc_regs wcn3990_misc_reg = {
259 .axi_err = 0x00000100,
260 .dstr_add_err = 0x00000200,
261 .srcr_len_err = 0x00000100,
262 .dstr_mlen_vio = 0x00000080,
263 .dstr_overflow = 0x00000040,
264 .srcr_overflow = 0x00000020,
265 .err_mask = 0x000003E0,
266 .addr = 0x00000038,
269 static struct ath10k_hw_ce_regs_addr_map wcn3990_src_wm_low = {
270 .msb = 0x00000000,
271 .lsb = 0x00000010,
272 .mask = GENMASK(31, 16),
275 static struct ath10k_hw_ce_regs_addr_map wcn3990_src_wm_high = {
276 .msb = 0x0000000f,
277 .lsb = 0x00000000,
278 .mask = GENMASK(15, 0),
281 static struct ath10k_hw_ce_dst_src_wm_regs wcn3990_wm_src_ring = {
282 .addr = 0x0000004c,
283 .low_rst = 0x00000000,
284 .high_rst = 0x00000000,
285 .wm_low = &wcn3990_src_wm_low,
286 .wm_high = &wcn3990_src_wm_high,
289 static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_wm_low = {
290 .lsb = 0x00000010,
291 .mask = GENMASK(31, 16),
294 static struct ath10k_hw_ce_regs_addr_map wcn3990_dst_wm_high = {
295 .msb = 0x0000000f,
296 .lsb = 0x00000000,
297 .mask = GENMASK(15, 0),
300 static struct ath10k_hw_ce_dst_src_wm_regs wcn3990_wm_dst_ring = {
301 .addr = 0x00000050,
302 .low_rst = 0x00000000,
303 .high_rst = 0x00000000,
304 .wm_low = &wcn3990_dst_wm_low,
305 .wm_high = &wcn3990_dst_wm_high,
308 static struct ath10k_hw_ce_ctrl1_upd wcn3990_ctrl1_upd = {
309 .shift = 19,
310 .mask = 0x00080000,
311 .enable = 0x00000000,
314 const struct ath10k_hw_ce_regs wcn3990_ce_regs = {
315 .sr_base_addr_lo = 0x00000000,
316 .sr_base_addr_hi = 0x00000004,
317 .sr_size_addr = 0x00000008,
318 .dr_base_addr_lo = 0x0000000c,
319 .dr_base_addr_hi = 0x00000010,
320 .dr_size_addr = 0x00000014,
321 .misc_ie_addr = 0x00000034,
322 .sr_wr_index_addr = 0x0000003c,
323 .dst_wr_index_addr = 0x00000040,
324 .current_srri_addr = 0x00000044,
325 .current_drri_addr = 0x00000048,
326 .ce_rri_low = 0x0024C004,
327 .ce_rri_high = 0x0024C008,
328 .host_ie_addr = 0x0000002c,
329 .ctrl1_regs = &wcn3990_ctrl1,
330 .host_ie = &wcn3990_host_ie,
331 .wm_regs = &wcn3990_wm_reg,
332 .misc_regs = &wcn3990_misc_reg,
333 .wm_srcr = &wcn3990_wm_src_ring,
334 .wm_dstr = &wcn3990_wm_dst_ring,
335 .upd = &wcn3990_ctrl1_upd,
338 const struct ath10k_hw_values wcn3990_values = {
339 .rtc_state_val_on = 5,
340 .ce_count = 12,
341 .msi_assign_ce_max = 12,
342 .num_target_ce_config_wlan = 12,
343 .ce_desc_meta_data_mask = 0xFFF0,
344 .ce_desc_meta_data_lsb = 4,
347 static struct ath10k_hw_ce_regs_addr_map qcax_src_ring = {
348 .msb = 0x00000010,
349 .lsb = 0x00000010,
350 .mask = GENMASK(16, 16),
353 static struct ath10k_hw_ce_regs_addr_map qcax_dst_ring = {
354 .msb = 0x00000011,
355 .lsb = 0x00000011,
356 .mask = GENMASK(17, 17),
359 static struct ath10k_hw_ce_regs_addr_map qcax_dmax = {
360 .msb = 0x0000000f,
361 .lsb = 0x00000000,
362 .mask = GENMASK(15, 0),
365 static struct ath10k_hw_ce_ctrl1 qcax_ctrl1 = {
366 .addr = 0x00000010,
367 .hw_mask = 0x0007ffff,
368 .sw_mask = 0x0007ffff,
369 .hw_wr_mask = 0x00000000,
370 .sw_wr_mask = 0x0007ffff,
371 .reset_mask = 0xffffffff,
372 .reset = 0x00000080,
373 .src_ring = &qcax_src_ring,
374 .dst_ring = &qcax_dst_ring,
375 .dmax = &qcax_dmax,
378 static struct ath10k_hw_ce_regs_addr_map qcax_cmd_halt_status = {
379 .msb = 0x00000003,
380 .lsb = 0x00000003,
381 .mask = GENMASK(3, 3),
384 static struct ath10k_hw_ce_cmd_halt qcax_cmd_halt = {
385 .msb = 0x00000000,
386 .mask = GENMASK(0, 0),
387 .status_reset = 0x00000000,
388 .status = &qcax_cmd_halt_status,
391 static struct ath10k_hw_ce_regs_addr_map qcax_host_ie_cc = {
392 .msb = 0x00000000,
393 .lsb = 0x00000000,
394 .mask = GENMASK(0, 0),
397 static struct ath10k_hw_ce_host_ie qcax_host_ie = {
398 .copy_complete_reset = 0x00000000,
399 .copy_complete = &qcax_host_ie_cc,
402 static struct ath10k_hw_ce_host_wm_regs qcax_wm_reg = {
403 .dstr_lmask = 0x00000010,
404 .dstr_hmask = 0x00000008,
405 .srcr_lmask = 0x00000004,
406 .srcr_hmask = 0x00000002,
407 .cc_mask = 0x00000001,
408 .wm_mask = 0x0000001E,
409 .addr = 0x00000030,
412 static struct ath10k_hw_ce_misc_regs qcax_misc_reg = {
413 .axi_err = 0x00000400,
414 .dstr_add_err = 0x00000200,
415 .srcr_len_err = 0x00000100,
416 .dstr_mlen_vio = 0x00000080,
417 .dstr_overflow = 0x00000040,
418 .srcr_overflow = 0x00000020,
419 .err_mask = 0x000007E0,
420 .addr = 0x00000038,
423 static struct ath10k_hw_ce_regs_addr_map qcax_src_wm_low = {
424 .msb = 0x0000001f,
425 .lsb = 0x00000010,
426 .mask = GENMASK(31, 16),
429 static struct ath10k_hw_ce_regs_addr_map qcax_src_wm_high = {
430 .msb = 0x0000000f,
431 .lsb = 0x00000000,
432 .mask = GENMASK(15, 0),
435 static struct ath10k_hw_ce_dst_src_wm_regs qcax_wm_src_ring = {
436 .addr = 0x0000004c,
437 .low_rst = 0x00000000,
438 .high_rst = 0x00000000,
439 .wm_low = &qcax_src_wm_low,
440 .wm_high = &qcax_src_wm_high,
443 static struct ath10k_hw_ce_regs_addr_map qcax_dst_wm_low = {
444 .lsb = 0x00000010,
445 .mask = GENMASK(31, 16),
448 static struct ath10k_hw_ce_regs_addr_map qcax_dst_wm_high = {
449 .msb = 0x0000000f,
450 .lsb = 0x00000000,
451 .mask = GENMASK(15, 0),
454 static struct ath10k_hw_ce_dst_src_wm_regs qcax_wm_dst_ring = {
455 .addr = 0x00000050,
456 .low_rst = 0x00000000,
457 .high_rst = 0x00000000,
458 .wm_low = &qcax_dst_wm_low,
459 .wm_high = &qcax_dst_wm_high,
462 const struct ath10k_hw_ce_regs qcax_ce_regs = {
463 .sr_base_addr_lo = 0x00000000,
464 .sr_size_addr = 0x00000004,
465 .dr_base_addr_lo = 0x00000008,
466 .dr_size_addr = 0x0000000c,
467 .ce_cmd_addr = 0x00000018,
468 .misc_ie_addr = 0x00000034,
469 .sr_wr_index_addr = 0x0000003c,
470 .dst_wr_index_addr = 0x00000040,
471 .current_srri_addr = 0x00000044,
472 .current_drri_addr = 0x00000048,
473 .host_ie_addr = 0x0000002c,
474 .ctrl1_regs = &qcax_ctrl1,
475 .cmd_halt = &qcax_cmd_halt,
476 .host_ie = &qcax_host_ie,
477 .wm_regs = &qcax_wm_reg,
478 .misc_regs = &qcax_misc_reg,
479 .wm_srcr = &qcax_wm_src_ring,
480 .wm_dstr = &qcax_wm_dst_ring,
483 const struct ath10k_hw_clk_params qca6174_clk[ATH10K_HW_REFCLK_COUNT] = {
485 .refclk = 48000000,
486 .div = 0xe,
487 .rnfrac = 0x2aaa8,
488 .settle_time = 2400,
489 .refdiv = 0,
490 .outdiv = 1,
493 .refclk = 19200000,
494 .div = 0x24,
495 .rnfrac = 0x2aaa8,
496 .settle_time = 960,
497 .refdiv = 0,
498 .outdiv = 1,
501 .refclk = 24000000,
502 .div = 0x1d,
503 .rnfrac = 0x15551,
504 .settle_time = 1200,
505 .refdiv = 0,
506 .outdiv = 1,
509 .refclk = 26000000,
510 .div = 0x1b,
511 .rnfrac = 0x4ec4,
512 .settle_time = 1300,
513 .refdiv = 0,
514 .outdiv = 1,
517 .refclk = 37400000,
518 .div = 0x12,
519 .rnfrac = 0x34b49,
520 .settle_time = 1870,
521 .refdiv = 0,
522 .outdiv = 1,
525 .refclk = 38400000,
526 .div = 0x12,
527 .rnfrac = 0x15551,
528 .settle_time = 1920,
529 .refdiv = 0,
530 .outdiv = 1,
533 .refclk = 40000000,
534 .div = 0x12,
535 .rnfrac = 0x26665,
536 .settle_time = 2000,
537 .refdiv = 0,
538 .outdiv = 1,
541 .refclk = 52000000,
542 .div = 0x1b,
543 .rnfrac = 0x4ec4,
544 .settle_time = 2600,
545 .refdiv = 0,
546 .outdiv = 1,
550 void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
551 u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
553 u32 cc_fix = 0;
554 u32 rcc_fix = 0;
555 enum ath10k_hw_cc_wraparound_type wraparound_type;
557 survey->filled |= SURVEY_INFO_TIME |
558 SURVEY_INFO_TIME_BUSY;
560 wraparound_type = ar->hw_params.cc_wraparound_type;
562 if (cc < cc_prev || rcc < rcc_prev) {
563 switch (wraparound_type) {
564 case ATH10K_HW_CC_WRAP_SHIFTED_ALL:
565 if (cc < cc_prev) {
566 cc_fix = 0x7fffffff;
567 survey->filled &= ~SURVEY_INFO_TIME_BUSY;
569 break;
570 case ATH10K_HW_CC_WRAP_SHIFTED_EACH:
571 if (cc < cc_prev)
572 cc_fix = 0x7fffffff;
574 if (rcc < rcc_prev)
575 rcc_fix = 0x7fffffff;
576 break;
577 case ATH10K_HW_CC_WRAP_DISABLED:
578 break;
582 cc -= cc_prev - cc_fix;
583 rcc -= rcc_prev - rcc_fix;
585 survey->time = CCNT_TO_MSEC(ar, cc);
586 survey->time_busy = CCNT_TO_MSEC(ar, rcc);
589 /* The firmware does not support setting the coverage class. Instead this
590 * function monitors and modifies the corresponding MAC registers.
592 static void ath10k_hw_qca988x_set_coverage_class(struct ath10k *ar,
593 s16 value)
595 u32 slottime_reg;
596 u32 slottime;
597 u32 timeout_reg;
598 u32 ack_timeout;
599 u32 cts_timeout;
600 u32 phyclk_reg;
601 u32 phyclk;
602 u64 fw_dbglog_mask;
603 u32 fw_dbglog_level;
605 mutex_lock(&ar->conf_mutex);
607 /* Only modify registers if the core is started. */
608 if ((ar->state != ATH10K_STATE_ON) &&
609 (ar->state != ATH10K_STATE_RESTARTED)) {
610 spin_lock_bh(&ar->data_lock);
611 /* Store config value for when radio boots up */
612 ar->fw_coverage.coverage_class = value;
613 spin_unlock_bh(&ar->data_lock);
614 goto unlock;
617 /* Retrieve the current values of the two registers that need to be
618 * adjusted.
620 slottime_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS +
621 WAVE1_PCU_GBL_IFS_SLOT);
622 timeout_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS +
623 WAVE1_PCU_ACK_CTS_TIMEOUT);
624 phyclk_reg = ath10k_hif_read32(ar, WLAN_MAC_BASE_ADDRESS +
625 WAVE1_PHYCLK);
626 phyclk = MS(phyclk_reg, WAVE1_PHYCLK_USEC) + 1;
628 if (value < 0)
629 value = ar->fw_coverage.coverage_class;
631 /* Break out if the coverage class and registers have the expected
632 * value.
634 if (value == ar->fw_coverage.coverage_class &&
635 slottime_reg == ar->fw_coverage.reg_slottime_conf &&
636 timeout_reg == ar->fw_coverage.reg_ack_cts_timeout_conf &&
637 phyclk_reg == ar->fw_coverage.reg_phyclk)
638 goto unlock;
640 /* Store new initial register values from the firmware. */
641 if (slottime_reg != ar->fw_coverage.reg_slottime_conf)
642 ar->fw_coverage.reg_slottime_orig = slottime_reg;
643 if (timeout_reg != ar->fw_coverage.reg_ack_cts_timeout_conf)
644 ar->fw_coverage.reg_ack_cts_timeout_orig = timeout_reg;
645 ar->fw_coverage.reg_phyclk = phyclk_reg;
647 /* Calculate new value based on the (original) firmware calculation. */
648 slottime_reg = ar->fw_coverage.reg_slottime_orig;
649 timeout_reg = ar->fw_coverage.reg_ack_cts_timeout_orig;
651 /* Do some sanity checks on the slottime register. */
652 if (slottime_reg % phyclk) {
653 ath10k_warn(ar,
654 "failed to set coverage class: expected integer microsecond value in register\n");
656 goto store_regs;
659 slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT);
660 slottime = slottime / phyclk;
661 if (slottime != 9 && slottime != 20) {
662 ath10k_warn(ar,
663 "failed to set coverage class: expected slot time of 9 or 20us in HW register. It is %uus.\n",
664 slottime);
666 goto store_regs;
669 /* Recalculate the register values by adding the additional propagation
670 * delay (3us per coverage class).
673 slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT);
674 slottime += value * 3 * phyclk;
675 slottime = min_t(u32, slottime, WAVE1_PCU_GBL_IFS_SLOT_MAX);
676 slottime = SM(slottime, WAVE1_PCU_GBL_IFS_SLOT);
677 slottime_reg = (slottime_reg & ~WAVE1_PCU_GBL_IFS_SLOT_MASK) | slottime;
679 /* Update ack timeout (lower halfword). */
680 ack_timeout = MS(timeout_reg, WAVE1_PCU_ACK_CTS_TIMEOUT_ACK);
681 ack_timeout += 3 * value * phyclk;
682 ack_timeout = min_t(u32, ack_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_MAX);
683 ack_timeout = SM(ack_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_ACK);
685 /* Update cts timeout (upper halfword). */
686 cts_timeout = MS(timeout_reg, WAVE1_PCU_ACK_CTS_TIMEOUT_CTS);
687 cts_timeout += 3 * value * phyclk;
688 cts_timeout = min_t(u32, cts_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_MAX);
689 cts_timeout = SM(cts_timeout, WAVE1_PCU_ACK_CTS_TIMEOUT_CTS);
691 timeout_reg = ack_timeout | cts_timeout;
693 ath10k_hif_write32(ar,
694 WLAN_MAC_BASE_ADDRESS + WAVE1_PCU_GBL_IFS_SLOT,
695 slottime_reg);
696 ath10k_hif_write32(ar,
697 WLAN_MAC_BASE_ADDRESS + WAVE1_PCU_ACK_CTS_TIMEOUT,
698 timeout_reg);
700 /* Ensure we have a debug level of WARN set for the case that the
701 * coverage class is larger than 0. This is important as we need to
702 * set the registers again if the firmware does an internal reset and
703 * this way we will be notified of the event.
705 fw_dbglog_mask = ath10k_debug_get_fw_dbglog_mask(ar);
706 fw_dbglog_level = ath10k_debug_get_fw_dbglog_level(ar);
708 if (value > 0) {
709 if (fw_dbglog_level > ATH10K_DBGLOG_LEVEL_WARN)
710 fw_dbglog_level = ATH10K_DBGLOG_LEVEL_WARN;
711 fw_dbglog_mask = ~0;
714 ath10k_wmi_dbglog_cfg(ar, fw_dbglog_mask, fw_dbglog_level);
716 store_regs:
717 /* After an error we will not retry setting the coverage class. */
718 spin_lock_bh(&ar->data_lock);
719 ar->fw_coverage.coverage_class = value;
720 spin_unlock_bh(&ar->data_lock);
722 ar->fw_coverage.reg_slottime_conf = slottime_reg;
723 ar->fw_coverage.reg_ack_cts_timeout_conf = timeout_reg;
725 unlock:
726 mutex_unlock(&ar->conf_mutex);
730 * ath10k_hw_qca6174_enable_pll_clock() - enable the qca6174 hw pll clock
731 * @ar: the ath10k blob
733 * This function is very hardware specific, the clock initialization
734 * steps is very sensitive and could lead to unknown crash, so they
735 * should be done in sequence.
737 * *** Be aware if you planned to refactor them. ***
739 * Return: 0 if successfully enable the pll, otherwise EINVAL
741 static int ath10k_hw_qca6174_enable_pll_clock(struct ath10k *ar)
743 int ret, wait_limit;
744 u32 clk_div_addr, pll_init_addr, speed_addr;
745 u32 addr, reg_val, mem_val;
746 struct ath10k_hw_params *hw;
747 const struct ath10k_hw_clk_params *hw_clk;
749 hw = &ar->hw_params;
751 if (ar->regs->core_clk_div_address == 0 ||
752 ar->regs->cpu_pll_init_address == 0 ||
753 ar->regs->cpu_speed_address == 0)
754 return -EINVAL;
756 clk_div_addr = ar->regs->core_clk_div_address;
757 pll_init_addr = ar->regs->cpu_pll_init_address;
758 speed_addr = ar->regs->cpu_speed_address;
760 /* Read efuse register to find out the right hw clock configuration */
761 addr = (RTC_SOC_BASE_ADDRESS | EFUSE_OFFSET);
762 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
763 if (ret)
764 return -EINVAL;
766 /* sanitize if the hw refclk index is out of the boundary */
767 if (MS(reg_val, EFUSE_XTAL_SEL) > ATH10K_HW_REFCLK_COUNT)
768 return -EINVAL;
770 hw_clk = &hw->hw_clk[MS(reg_val, EFUSE_XTAL_SEL)];
772 /* Set the rnfrac and outdiv params to bb_pll register */
773 addr = (RTC_SOC_BASE_ADDRESS | BB_PLL_CONFIG_OFFSET);
774 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
775 if (ret)
776 return -EINVAL;
778 reg_val &= ~(BB_PLL_CONFIG_FRAC_MASK | BB_PLL_CONFIG_OUTDIV_MASK);
779 reg_val |= (SM(hw_clk->rnfrac, BB_PLL_CONFIG_FRAC) |
780 SM(hw_clk->outdiv, BB_PLL_CONFIG_OUTDIV));
781 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
782 if (ret)
783 return -EINVAL;
785 /* Set the correct settle time value to pll_settle register */
786 addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_SETTLE_OFFSET);
787 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
788 if (ret)
789 return -EINVAL;
791 reg_val &= ~WLAN_PLL_SETTLE_TIME_MASK;
792 reg_val |= SM(hw_clk->settle_time, WLAN_PLL_SETTLE_TIME);
793 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
794 if (ret)
795 return -EINVAL;
797 /* Set the clock_ctrl div to core_clk_ctrl register */
798 addr = (RTC_SOC_BASE_ADDRESS | SOC_CORE_CLK_CTRL_OFFSET);
799 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
800 if (ret)
801 return -EINVAL;
803 reg_val &= ~SOC_CORE_CLK_CTRL_DIV_MASK;
804 reg_val |= SM(1, SOC_CORE_CLK_CTRL_DIV);
805 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
806 if (ret)
807 return -EINVAL;
809 /* Set the clock_div register */
810 mem_val = 1;
811 ret = ath10k_bmi_write_memory(ar, clk_div_addr, &mem_val,
812 sizeof(mem_val));
813 if (ret)
814 return -EINVAL;
816 /* Configure the pll_control register */
817 addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET);
818 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
819 if (ret)
820 return -EINVAL;
822 reg_val |= (SM(hw_clk->refdiv, WLAN_PLL_CONTROL_REFDIV) |
823 SM(hw_clk->div, WLAN_PLL_CONTROL_DIV) |
824 SM(1, WLAN_PLL_CONTROL_NOPWD));
825 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
826 if (ret)
827 return -EINVAL;
829 /* busy wait (max 1s) the rtc_sync status register indicate ready */
830 wait_limit = 100000;
831 addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET);
832 do {
833 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
834 if (ret)
835 return -EINVAL;
837 if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
838 break;
840 wait_limit--;
841 udelay(10);
843 } while (wait_limit > 0);
845 if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
846 return -EINVAL;
848 /* Unset the pll_bypass in pll_control register */
849 addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET);
850 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
851 if (ret)
852 return -EINVAL;
854 reg_val &= ~WLAN_PLL_CONTROL_BYPASS_MASK;
855 reg_val |= SM(0, WLAN_PLL_CONTROL_BYPASS);
856 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
857 if (ret)
858 return -EINVAL;
860 /* busy wait (max 1s) the rtc_sync status register indicate ready */
861 wait_limit = 100000;
862 addr = (RTC_WMAC_BASE_ADDRESS | RTC_SYNC_STATUS_OFFSET);
863 do {
864 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
865 if (ret)
866 return -EINVAL;
868 if (!MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
869 break;
871 wait_limit--;
872 udelay(10);
874 } while (wait_limit > 0);
876 if (MS(reg_val, RTC_SYNC_STATUS_PLL_CHANGING))
877 return -EINVAL;
879 /* Enable the hardware cpu clock register */
880 addr = (RTC_SOC_BASE_ADDRESS | SOC_CPU_CLOCK_OFFSET);
881 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
882 if (ret)
883 return -EINVAL;
885 reg_val &= ~SOC_CPU_CLOCK_STANDARD_MASK;
886 reg_val |= SM(1, SOC_CPU_CLOCK_STANDARD);
887 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
888 if (ret)
889 return -EINVAL;
891 /* unset the nopwd from pll_control register */
892 addr = (RTC_WMAC_BASE_ADDRESS | WLAN_PLL_CONTROL_OFFSET);
893 ret = ath10k_bmi_read_soc_reg(ar, addr, &reg_val);
894 if (ret)
895 return -EINVAL;
897 reg_val &= ~WLAN_PLL_CONTROL_NOPWD_MASK;
898 ret = ath10k_bmi_write_soc_reg(ar, addr, reg_val);
899 if (ret)
900 return -EINVAL;
902 /* enable the pll_init register */
903 mem_val = 1;
904 ret = ath10k_bmi_write_memory(ar, pll_init_addr, &mem_val,
905 sizeof(mem_val));
906 if (ret)
907 return -EINVAL;
909 /* set the target clock frequency to speed register */
910 ret = ath10k_bmi_write_memory(ar, speed_addr, &hw->target_cpu_freq,
911 sizeof(hw->target_cpu_freq));
912 if (ret)
913 return -EINVAL;
915 return 0;
918 /* Program CPU_ADDR_MSB to allow different memory
919 * region access.
921 static void ath10k_hw_map_target_mem(struct ath10k *ar, u32 msb)
923 u32 address = SOC_CORE_BASE_ADDRESS + FW_RAM_CONFIG_ADDRESS;
925 ath10k_hif_write32(ar, address, msb);
928 /* 1. Write to memory region of target, such as IRAM and DRAM.
929 * 2. Target address( 0 ~ 00100000 & 0x00400000~0x00500000)
930 * can be written directly. See ath10k_pci_targ_cpu_to_ce_addr() too.
931 * 3. In order to access the region other than the above,
932 * we need to set the value of register CPU_ADDR_MSB.
933 * 4. Target memory access space is limited to 1M size. If the size is larger
934 * than 1M, need to split it and program CPU_ADDR_MSB accordingly.
936 static int ath10k_hw_diag_segment_msb_download(struct ath10k *ar,
937 const void *buffer,
938 u32 address,
939 u32 length)
941 u32 addr = address & REGION_ACCESS_SIZE_MASK;
942 int ret, remain_size, size;
943 const u8 *buf;
945 ath10k_hw_map_target_mem(ar, CPU_ADDR_MSB_REGION_VAL(address));
947 if (addr + length > REGION_ACCESS_SIZE_LIMIT) {
948 size = REGION_ACCESS_SIZE_LIMIT - addr;
949 remain_size = length - size;
951 ret = ath10k_hif_diag_write(ar, address, buffer, size);
952 if (ret) {
953 ath10k_warn(ar,
954 "failed to download the first %d bytes segment to address:0x%x: %d\n",
955 size, address, ret);
956 goto done;
959 /* Change msb to the next memory region*/
960 ath10k_hw_map_target_mem(ar,
961 CPU_ADDR_MSB_REGION_VAL(address) + 1);
962 buf = buffer + size;
963 ret = ath10k_hif_diag_write(ar,
964 address & ~REGION_ACCESS_SIZE_MASK,
965 buf, remain_size);
966 if (ret) {
967 ath10k_warn(ar,
968 "failed to download the second %d bytes segment to address:0x%x: %d\n",
969 remain_size,
970 address & ~REGION_ACCESS_SIZE_MASK,
971 ret);
972 goto done;
974 } else {
975 ret = ath10k_hif_diag_write(ar, address, buffer, length);
976 if (ret) {
977 ath10k_warn(ar,
978 "failed to download the only %d bytes segment to address:0x%x: %d\n",
979 length, address, ret);
980 goto done;
984 done:
985 /* Change msb to DRAM */
986 ath10k_hw_map_target_mem(ar,
987 CPU_ADDR_MSB_REGION_VAL(DRAM_BASE_ADDRESS));
988 return ret;
991 static int ath10k_hw_diag_segment_download(struct ath10k *ar,
992 const void *buffer,
993 u32 address,
994 u32 length)
996 if (address >= DRAM_BASE_ADDRESS + REGION_ACCESS_SIZE_LIMIT)
997 /* Needs to change MSB for memory write */
998 return ath10k_hw_diag_segment_msb_download(ar, buffer,
999 address, length);
1000 else
1001 return ath10k_hif_diag_write(ar, address, buffer, length);
1004 int ath10k_hw_diag_fast_download(struct ath10k *ar,
1005 u32 address,
1006 const void *buffer,
1007 u32 length)
1009 const u8 *buf = buffer;
1010 bool sgmt_end = false;
1011 u32 base_addr = 0;
1012 u32 base_len = 0;
1013 u32 left = 0;
1014 struct bmi_segmented_file_header *hdr;
1015 struct bmi_segmented_metadata *metadata;
1016 int ret = 0;
1018 if (length < sizeof(*hdr))
1019 return -EINVAL;
1021 /* check firmware header. If it has no correct magic number
1022 * or it's compressed, returns error.
1024 hdr = (struct bmi_segmented_file_header *)buf;
1025 if (__le32_to_cpu(hdr->magic_num) != BMI_SGMTFILE_MAGIC_NUM) {
1026 ath10k_dbg(ar, ATH10K_DBG_BOOT,
1027 "Not a supported firmware, magic_num:0x%x\n",
1028 hdr->magic_num);
1029 return -EINVAL;
1032 if (hdr->file_flags != 0) {
1033 ath10k_dbg(ar, ATH10K_DBG_BOOT,
1034 "Not a supported firmware, file_flags:0x%x\n",
1035 hdr->file_flags);
1036 return -EINVAL;
1039 metadata = (struct bmi_segmented_metadata *)hdr->data;
1040 left = length - sizeof(*hdr);
1042 while (left > 0) {
1043 if (left < sizeof(*metadata)) {
1044 ath10k_warn(ar, "firmware segment is truncated: %d\n",
1045 left);
1046 ret = -EINVAL;
1047 break;
1049 base_addr = __le32_to_cpu(metadata->addr);
1050 base_len = __le32_to_cpu(metadata->length);
1051 buf = metadata->data;
1052 left -= sizeof(*metadata);
1054 switch (base_len) {
1055 case BMI_SGMTFILE_BEGINADDR:
1056 /* base_addr is the start address to run */
1057 ret = ath10k_bmi_set_start(ar, base_addr);
1058 base_len = 0;
1059 break;
1060 case BMI_SGMTFILE_DONE:
1061 /* no more segment */
1062 base_len = 0;
1063 sgmt_end = true;
1064 ret = 0;
1065 break;
1066 case BMI_SGMTFILE_BDDATA:
1067 case BMI_SGMTFILE_EXEC:
1068 ath10k_warn(ar,
1069 "firmware has unsupported segment:%d\n",
1070 base_len);
1071 ret = -EINVAL;
1072 break;
1073 default:
1074 if (base_len > left) {
1075 /* sanity check */
1076 ath10k_warn(ar,
1077 "firmware has invalid segment length, %d > %d\n",
1078 base_len, left);
1079 ret = -EINVAL;
1080 break;
1083 ret = ath10k_hw_diag_segment_download(ar,
1084 buf,
1085 base_addr,
1086 base_len);
1088 if (ret)
1089 ath10k_warn(ar,
1090 "failed to download firmware via diag interface:%d\n",
1091 ret);
1092 break;
1095 if (ret || sgmt_end)
1096 break;
1098 metadata = (struct bmi_segmented_metadata *)(buf + base_len);
1099 left -= base_len;
1102 if (ret == 0)
1103 ath10k_dbg(ar, ATH10K_DBG_BOOT,
1104 "boot firmware fast diag download successfully.\n");
1105 return ret;
1108 static int ath10k_htt_tx_rssi_enable(struct htt_resp *resp)
1110 return (resp->data_tx_completion.flags2 & HTT_TX_CMPL_FLAG_DATA_RSSI);
1113 static int ath10k_htt_tx_rssi_enable_wcn3990(struct htt_resp *resp)
1115 return (resp->data_tx_completion.flags2 &
1116 HTT_TX_DATA_RSSI_ENABLE_WCN3990);
1119 static int ath10k_get_htt_tx_data_rssi_pad(struct htt_resp *resp)
1121 struct htt_data_tx_completion_ext extd;
1122 int pad_bytes = 0;
1124 if (resp->data_tx_completion.flags2 & HTT_TX_DATA_APPEND_RETRIES)
1125 pad_bytes += sizeof(extd.a_retries) /
1126 sizeof(extd.msdus_rssi[0]);
1128 if (resp->data_tx_completion.flags2 & HTT_TX_DATA_APPEND_TIMESTAMP)
1129 pad_bytes += sizeof(extd.t_stamp) / sizeof(extd.msdus_rssi[0]);
1131 return pad_bytes;
1134 const struct ath10k_hw_ops qca988x_ops = {
1135 .set_coverage_class = ath10k_hw_qca988x_set_coverage_class,
1136 .is_rssi_enable = ath10k_htt_tx_rssi_enable,
1139 const struct ath10k_hw_ops qca99x0_ops = {
1140 .is_rssi_enable = ath10k_htt_tx_rssi_enable,
1143 const struct ath10k_hw_ops qca6174_ops = {
1144 .set_coverage_class = ath10k_hw_qca988x_set_coverage_class,
1145 .enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock,
1146 .is_rssi_enable = ath10k_htt_tx_rssi_enable,
1149 const struct ath10k_hw_ops qca6174_sdio_ops = {
1150 .enable_pll_clk = ath10k_hw_qca6174_enable_pll_clock,
1153 const struct ath10k_hw_ops wcn3990_ops = {
1154 .tx_data_rssi_pad_bytes = ath10k_get_htt_tx_data_rssi_pad,
1155 .is_rssi_enable = ath10k_htt_tx_rssi_enable_wcn3990,