drm/panel-edp: Add STA 116QHD024002

[drm/drm-misc.git] / drivers / pci / probe.c

// SPDX-License-Identifier: GPL-2.0
/*
 * PCI detection and setup code
 */

#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/msi.h>
#include <linux/of_pci.h>
#include <linux/pci_hotplug.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/aer.h>
#include <linux/acpi.h>
#include <linux/hypervisor.h>
#include <linux/irqdomain.h>
#include <linux/pm_runtime.h>
#include <linux/bitfield.h>
#include "pci.h"

#define CARDBUS_LATENCY_TIMER   176     /* secondary latency timer */
#define CARDBUS_RESERVE_BUSNR   3

static struct resource busn_resource = {
        .name   = "PCI busn",
        .start  = 0,
        .end    = 255,
        .flags  = IORESOURCE_BUS,
};

/* Ugh.  Need to stop exporting this to modules. */
LIST_HEAD(pci_root_buses);
EXPORT_SYMBOL(pci_root_buses);

static LIST_HEAD(pci_domain_busn_res_list);

struct pci_domain_busn_res {
        struct list_head list;
        struct resource res;
        int domain_nr;
};

static struct resource *get_pci_domain_busn_res(int domain_nr)
{
        struct pci_domain_busn_res *r;

        list_for_each_entry(r, &pci_domain_busn_res_list, list)
                if (r->domain_nr == domain_nr)
                        return &r->res;

        r = kzalloc(sizeof(*r), GFP_KERNEL);
        if (!r)
                return NULL;

        r->domain_nr = domain_nr;
        r->res.start = 0;
        r->res.end = 0xff;
        r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED;

        list_add_tail(&r->list, &pci_domain_busn_res_list);

        return &r->res;
}

/*
 * Some device drivers need know if PCI is initiated.
 * Basically, we think PCI is not initiated when there
 * is no device to be found on the pci_bus_type.
 */
int no_pci_devices(void)
{
        struct device *dev;
        int no_devices;

        dev = bus_find_next_device(&pci_bus_type, NULL);
        no_devices = (dev == NULL);
        put_device(dev);
        return no_devices;
}
EXPORT_SYMBOL(no_pci_devices);

/*
 * PCI Bus Class
 */
static void release_pcibus_dev(struct device *dev)
{
        struct pci_bus *pci_bus = to_pci_bus(dev);

        put_device(pci_bus->bridge);
        pci_bus_remove_resources(pci_bus);
        pci_release_bus_of_node(pci_bus);
        kfree(pci_bus);
}

static const struct class pcibus_class = {
        .name           = "pci_bus",
        .dev_release    = &release_pcibus_dev,
        .dev_groups     = pcibus_groups,
};

static int __init pcibus_class_init(void)
{
        return class_register(&pcibus_class);
}
postcore_initcall(pcibus_class_init);

static u64 pci_size(u64 base, u64 maxbase, u64 mask)
{
        u64 size = mask & maxbase;      /* Find the significant bits */
        if (!size)
                return 0;

        /*
         * Get the lowest of them to find the decode size, and from that
         * the extent.
         */
        size = size & ~(size-1);

        /*
         * base == maxbase can be valid only if the BAR has already been
         * programmed with all 1s.
         */
        if (base == maxbase && ((base | (size - 1)) & mask) != mask)
                return 0;

        return size;
}

static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
{
        u32 mem_type;
        unsigned long flags;

        if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
                flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
                flags |= IORESOURCE_IO;
                return flags;
        }

        flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
        flags |= IORESOURCE_MEM;
        if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
                flags |= IORESOURCE_PREFETCH;

        mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
        switch (mem_type) {
        case PCI_BASE_ADDRESS_MEM_TYPE_32:
                break;
        case PCI_BASE_ADDRESS_MEM_TYPE_1M:
                /* 1M mem BAR treated as 32-bit BAR */
                break;
        case PCI_BASE_ADDRESS_MEM_TYPE_64:
                flags |= IORESOURCE_MEM_64;
                break;
        default:
                /* mem unknown type treated as 32-bit BAR */
                break;
        }
        return flags;
}

#define PCI_COMMAND_DECODE_ENABLE       (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)

/**
 * __pci_read_base - Read a PCI BAR
 * @dev: the PCI device
 * @type: type of the BAR
 * @res: resource buffer to be filled in
 * @pos: BAR position in the config space
 *
 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
 */
int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
                    struct resource *res, unsigned int pos)
{
        u32 l = 0, sz = 0, mask;
        u64 l64, sz64, mask64;
        u16 orig_cmd;
        struct pci_bus_region region, inverted_region;
        const char *res_name = pci_resource_name(dev, res - dev->resource);

        mask = type ? PCI_ROM_ADDRESS_MASK : ~0;

        /* No printks while decoding is disabled! */
        if (!dev->mmio_always_on) {
                pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
                if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) {
                        pci_write_config_word(dev, PCI_COMMAND,
                                orig_cmd & ~PCI_COMMAND_DECODE_ENABLE);
                }
        }

        res->name = pci_name(dev);

        pci_read_config_dword(dev, pos, &l);
        pci_write_config_dword(dev, pos, l | mask);
        pci_read_config_dword(dev, pos, &sz);
        pci_write_config_dword(dev, pos, l);

        /*
         * All bits set in sz means the device isn't working properly.
         * If the BAR isn't implemented, all bits must be 0.  If it's a
         * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
         * 1 must be clear.
         */
        if (PCI_POSSIBLE_ERROR(sz))
                sz = 0;

        /*
         * I don't know how l can have all bits set.  Copied from old code.
         * Maybe it fixes a bug on some ancient platform.
         */
        if (PCI_POSSIBLE_ERROR(l))
                l = 0;

        if (type == pci_bar_unknown) {
                res->flags = decode_bar(dev, l);
                res->flags |= IORESOURCE_SIZEALIGN;
                if (res->flags & IORESOURCE_IO) {
                        l64 = l & PCI_BASE_ADDRESS_IO_MASK;
                        sz64 = sz & PCI_BASE_ADDRESS_IO_MASK;
                        mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT;
                } else {
                        l64 = l & PCI_BASE_ADDRESS_MEM_MASK;
                        sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK;
                        mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK;
                }
        } else {
                if (l & PCI_ROM_ADDRESS_ENABLE)
                        res->flags |= IORESOURCE_ROM_ENABLE;
                l64 = l & PCI_ROM_ADDRESS_MASK;
                sz64 = sz & PCI_ROM_ADDRESS_MASK;
                mask64 = PCI_ROM_ADDRESS_MASK;
        }

        if (res->flags & IORESOURCE_MEM_64) {
                pci_read_config_dword(dev, pos + 4, &l);
                pci_write_config_dword(dev, pos + 4, ~0);
                pci_read_config_dword(dev, pos + 4, &sz);
                pci_write_config_dword(dev, pos + 4, l);

                l64 |= ((u64)l << 32);
                sz64 |= ((u64)sz << 32);
                mask64 |= ((u64)~0 << 32);
        }

        if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE))
                pci_write_config_word(dev, PCI_COMMAND, orig_cmd);

        if (!sz64)
                goto fail;

        sz64 = pci_size(l64, sz64, mask64);
        if (!sz64) {
                pci_info(dev, FW_BUG "%s: invalid; can't size\n", res_name);
                goto fail;
        }

        if (res->flags & IORESOURCE_MEM_64) {
                if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8)
                    && sz64 > 0x100000000ULL) {
                        res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED;
                        res->start = 0;
                        res->end = 0;
                        pci_err(dev, "%s: can't handle BAR larger than 4GB (size %#010llx)\n",
                                res_name, (unsigned long long)sz64);
                        goto out;
                }

                if ((sizeof(pci_bus_addr_t) < 8) && l) {
                        /* Above 32-bit boundary; try to reallocate */
                        res->flags |= IORESOURCE_UNSET;
                        res->start = 0;
                        res->end = sz64 - 1;
                        pci_info(dev, "%s: can't handle BAR above 4GB (bus address %#010llx)\n",
                                 res_name, (unsigned long long)l64);
                        goto out;
                }
        }

        region.start = l64;
        region.end = l64 + sz64 - 1;

        pcibios_bus_to_resource(dev->bus, res, &region);
        pcibios_resource_to_bus(dev->bus, &inverted_region, res);

        /*
         * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is
         * the corresponding resource address (the physical address used by
         * the CPU.  Converting that resource address back to a bus address
         * should yield the original BAR value:
         *
         *     resource_to_bus(bus_to_resource(A)) == A
         *
         * If it doesn't, CPU accesses to "bus_to_resource(A)" will not
         * be claimed by the device.
         */
        if (inverted_region.start != region.start) {
                res->flags |= IORESOURCE_UNSET;
                res->start = 0;
                res->end = region.end - region.start;
                pci_info(dev, "%s: initial BAR value %#010llx invalid\n",
                         res_name, (unsigned long long)region.start);
        }

        goto out;


fail:
        res->flags = 0;
out:
        if (res->flags)
                pci_info(dev, "%s %pR\n", res_name, res);

        return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
}

static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
{
        unsigned int pos, reg;

        if (dev->non_compliant_bars)
                return;

        /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */
        if (dev->is_virtfn)
                return;

        for (pos = 0; pos < howmany; pos++) {
                struct resource *res = &dev->resource[pos];
                reg = PCI_BASE_ADDRESS_0 + (pos << 2);
                pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
        }

        if (rom) {
                struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
                dev->rom_base_reg = rom;
                res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
                                IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
                __pci_read_base(dev, pci_bar_mem32, res, rom);
        }
}

static void pci_read_bridge_io(struct pci_dev *dev, struct resource *res,
                               bool log)
{
        u8 io_base_lo, io_limit_lo;
        unsigned long io_mask, io_granularity, base, limit;
        struct pci_bus_region region;

        io_mask = PCI_IO_RANGE_MASK;
        io_granularity = 0x1000;
        if (dev->io_window_1k) {
                /* Support 1K I/O space granularity */
                io_mask = PCI_IO_1K_RANGE_MASK;
                io_granularity = 0x400;
        }

        pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
        pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
        base = (io_base_lo & io_mask) << 8;
        limit = (io_limit_lo & io_mask) << 8;

        if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
                u16 io_base_hi, io_limit_hi;

                pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
                pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
                base |= ((unsigned long) io_base_hi << 16);
                limit |= ((unsigned long) io_limit_hi << 16);
        }

        if (base <= limit) {
                res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
                region.start = base;
                region.end = limit + io_granularity - 1;
                pcibios_bus_to_resource(dev->bus, res, &region);
                if (log)
                        pci_info(dev, "  bridge window %pR\n", res);
        }
}

static void pci_read_bridge_mmio(struct pci_dev *dev, struct resource *res,
                                 bool log)
{
        u16 mem_base_lo, mem_limit_lo;
        unsigned long base, limit;
        struct pci_bus_region region;

        pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
        pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
        base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
        limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
        if (base <= limit) {
                res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
                region.start = base;
                region.end = limit + 0xfffff;
                pcibios_bus_to_resource(dev->bus, res, &region);
                if (log)
                        pci_info(dev, "  bridge window %pR\n", res);
        }
}

static void pci_read_bridge_mmio_pref(struct pci_dev *dev, struct resource *res,
                                      bool log)
{
        u16 mem_base_lo, mem_limit_lo;
        u64 base64, limit64;
        pci_bus_addr_t base, limit;
        struct pci_bus_region region;

        pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
        pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
        base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
        limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;

        if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
                u32 mem_base_hi, mem_limit_hi;

                pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
                pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);

                /*
                 * Some bridges set the base > limit by default, and some
                 * (broken) BIOSes do not initialize them.  If we find
                 * this, just assume they are not being used.
                 */
                if (mem_base_hi <= mem_limit_hi) {
                        base64 |= (u64) mem_base_hi << 32;
                        limit64 |= (u64) mem_limit_hi << 32;
                }
        }

        base = (pci_bus_addr_t) base64;
        limit = (pci_bus_addr_t) limit64;

        if (base != base64) {
                pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
                        (unsigned long long) base64);
                return;
        }

        if (base <= limit) {
                res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
                                         IORESOURCE_MEM | IORESOURCE_PREFETCH;
                if (res->flags & PCI_PREF_RANGE_TYPE_64)
                        res->flags |= IORESOURCE_MEM_64;
                region.start = base;
                region.end = limit + 0xfffff;
                pcibios_bus_to_resource(dev->bus, res, &region);
                if (log)
                        pci_info(dev, "  bridge window %pR\n", res);
        }
}

static void pci_read_bridge_windows(struct pci_dev *bridge)
{
        u32 buses;
        u16 io;
        u32 pmem, tmp;
        struct resource res;

        pci_read_config_dword(bridge, PCI_PRIMARY_BUS, &buses);
        res.flags = IORESOURCE_BUS;
        res.start = (buses >> 8) & 0xff;
        res.end = (buses >> 16) & 0xff;
        pci_info(bridge, "PCI bridge to %pR%s\n", &res,
                 bridge->transparent ? " (subtractive decode)" : "");

        pci_read_config_word(bridge, PCI_IO_BASE, &io);
        if (!io) {
                pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0);
                pci_read_config_word(bridge, PCI_IO_BASE, &io);
                pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
        }
        if (io) {
                bridge->io_window = 1;
                pci_read_bridge_io(bridge, &res, true);
        }

        pci_read_bridge_mmio(bridge, &res, true);

        /*
         * DECchip 21050 pass 2 errata: the bridge may miss an address
         * disconnect boundary by one PCI data phase.  Workaround: do not
         * use prefetching on this device.
         */
        if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
                return;

        pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
        if (!pmem) {
                pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
                                               0xffe0fff0);
                pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
                pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
        }
        if (!pmem)
                return;

        bridge->pref_window = 1;

        if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {

                /*
                 * Bridge claims to have a 64-bit prefetchable memory
                 * window; verify that the upper bits are actually
                 * writable.
                 */
                pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem);
                pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
                                       0xffffffff);
                pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
                pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem);
                if (tmp)
                        bridge->pref_64_window = 1;
        }

        pci_read_bridge_mmio_pref(bridge, &res, true);
}

void pci_read_bridge_bases(struct pci_bus *child)
{
        struct pci_dev *dev = child->self;
        struct resource *res;
        int i;

        if (pci_is_root_bus(child))     /* It's a host bus, nothing to read */
                return;

        pci_info(dev, "PCI bridge to %pR%s\n",
                 &child->busn_res,
                 dev->transparent ? " (subtractive decode)" : "");

        pci_bus_remove_resources(child);
        for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
                child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];

        pci_read_bridge_io(child->self, child->resource[0], false);
        pci_read_bridge_mmio(child->self, child->resource[1], false);
        pci_read_bridge_mmio_pref(child->self, child->resource[2], false);

        if (!dev->transparent)
                return;

        pci_bus_for_each_resource(child->parent, res) {
                if (!res || !res->flags)
                        continue;

                pci_bus_add_resource(child, res);
                pci_info(dev, "  bridge window %pR (subtractive decode)\n", res);
        }
}

static struct pci_bus *pci_alloc_bus(struct pci_bus *parent)
{
        struct pci_bus *b;

        b = kzalloc(sizeof(*b), GFP_KERNEL);
        if (!b)
                return NULL;

        INIT_LIST_HEAD(&b->node);
        INIT_LIST_HEAD(&b->children);
        INIT_LIST_HEAD(&b->devices);
        INIT_LIST_HEAD(&b->slots);
        INIT_LIST_HEAD(&b->resources);
        b->max_bus_speed = PCI_SPEED_UNKNOWN;
        b->cur_bus_speed = PCI_SPEED_UNKNOWN;
#ifdef CONFIG_PCI_DOMAINS_GENERIC
        if (parent)
                b->domain_nr = parent->domain_nr;
#endif
        return b;
}

static void pci_release_host_bridge_dev(struct device *dev)
{
        struct pci_host_bridge *bridge = to_pci_host_bridge(dev);

        if (bridge->release_fn)
                bridge->release_fn(bridge);

        pci_free_resource_list(&bridge->windows);
        pci_free_resource_list(&bridge->dma_ranges);
        kfree(bridge);
}

static void pci_init_host_bridge(struct pci_host_bridge *bridge)
{
        INIT_LIST_HEAD(&bridge->windows);
        INIT_LIST_HEAD(&bridge->dma_ranges);

        /*
         * We assume we can manage these PCIe features.  Some systems may
         * reserve these for use by the platform itself, e.g., an ACPI BIOS
         * may implement its own AER handling and use _OSC to prevent the
         * OS from interfering.
         */
        bridge->native_aer = 1;
        bridge->native_pcie_hotplug = 1;
        bridge->native_shpc_hotplug = 1;
        bridge->native_pme = 1;
        bridge->native_ltr = 1;
        bridge->native_dpc = 1;
        bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
        bridge->native_cxl_error = 1;

        device_initialize(&bridge->dev);
}

struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
{
        struct pci_host_bridge *bridge;

        bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL);
        if (!bridge)
                return NULL;

        pci_init_host_bridge(bridge);
        bridge->dev.release = pci_release_host_bridge_dev;

        return bridge;
}
EXPORT_SYMBOL(pci_alloc_host_bridge);

static void devm_pci_alloc_host_bridge_release(void *data)
{
        pci_free_host_bridge(data);
}

struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev,
                                                   size_t priv)
{
        int ret;
        struct pci_host_bridge *bridge;

        bridge = pci_alloc_host_bridge(priv);
        if (!bridge)
                return NULL;

        bridge->dev.parent = dev;

        ret = devm_add_action_or_reset(dev, devm_pci_alloc_host_bridge_release,
                                       bridge);
        if (ret)
                return NULL;

        ret = devm_of_pci_bridge_init(dev, bridge);
        if (ret)
                return NULL;

        return bridge;
}
EXPORT_SYMBOL(devm_pci_alloc_host_bridge);

void pci_free_host_bridge(struct pci_host_bridge *bridge)
{
        put_device(&bridge->dev);
}
EXPORT_SYMBOL(pci_free_host_bridge);

/* Indexed by PCI_X_SSTATUS_FREQ (secondary bus mode and frequency) */
static const unsigned char pcix_bus_speed[] = {
        PCI_SPEED_UNKNOWN,              /* 0 */
        PCI_SPEED_66MHz_PCIX,           /* 1 */
        PCI_SPEED_100MHz_PCIX,          /* 2 */
        PCI_SPEED_133MHz_PCIX,          /* 3 */
        PCI_SPEED_UNKNOWN,              /* 4 */
        PCI_SPEED_66MHz_PCIX_ECC,       /* 5 */
        PCI_SPEED_100MHz_PCIX_ECC,      /* 6 */
        PCI_SPEED_133MHz_PCIX_ECC,      /* 7 */
        PCI_SPEED_UNKNOWN,              /* 8 */
        PCI_SPEED_66MHz_PCIX_266,       /* 9 */
        PCI_SPEED_100MHz_PCIX_266,      /* A */
        PCI_SPEED_133MHz_PCIX_266,      /* B */
        PCI_SPEED_UNKNOWN,              /* C */
        PCI_SPEED_66MHz_PCIX_533,       /* D */
        PCI_SPEED_100MHz_PCIX_533,      /* E */
        PCI_SPEED_133MHz_PCIX_533       /* F */
};

/* Indexed by PCI_EXP_LNKCAP_SLS, PCI_EXP_LNKSTA_CLS */
const unsigned char pcie_link_speed[] = {
        PCI_SPEED_UNKNOWN,              /* 0 */
        PCIE_SPEED_2_5GT,               /* 1 */
        PCIE_SPEED_5_0GT,               /* 2 */
        PCIE_SPEED_8_0GT,               /* 3 */
        PCIE_SPEED_16_0GT,              /* 4 */
        PCIE_SPEED_32_0GT,              /* 5 */
        PCIE_SPEED_64_0GT,              /* 6 */
        PCI_SPEED_UNKNOWN,              /* 7 */
        PCI_SPEED_UNKNOWN,              /* 8 */
        PCI_SPEED_UNKNOWN,              /* 9 */
        PCI_SPEED_UNKNOWN,              /* A */
        PCI_SPEED_UNKNOWN,              /* B */
        PCI_SPEED_UNKNOWN,              /* C */
        PCI_SPEED_UNKNOWN,              /* D */
        PCI_SPEED_UNKNOWN,              /* E */
        PCI_SPEED_UNKNOWN               /* F */
};
EXPORT_SYMBOL_GPL(pcie_link_speed);

const char *pci_speed_string(enum pci_bus_speed speed)
{
        /* Indexed by the pci_bus_speed enum */
        static const char *speed_strings[] = {
            "33 MHz PCI",               /* 0x00 */
            "66 MHz PCI",               /* 0x01 */
            "66 MHz PCI-X",             /* 0x02 */
            "100 MHz PCI-X",            /* 0x03 */
            "133 MHz PCI-X",            /* 0x04 */
            NULL,                       /* 0x05 */
            NULL,                       /* 0x06 */
            NULL,                       /* 0x07 */
            NULL,                       /* 0x08 */
            "66 MHz PCI-X 266",         /* 0x09 */
            "100 MHz PCI-X 266",        /* 0x0a */
            "133 MHz PCI-X 266",        /* 0x0b */
            "Unknown AGP",              /* 0x0c */
            "1x AGP",                   /* 0x0d */
            "2x AGP",                   /* 0x0e */
            "4x AGP",                   /* 0x0f */
            "8x AGP",                   /* 0x10 */
            "66 MHz PCI-X 533",         /* 0x11 */
            "100 MHz PCI-X 533",        /* 0x12 */
            "133 MHz PCI-X 533",        /* 0x13 */
            "2.5 GT/s PCIe",            /* 0x14 */
            "5.0 GT/s PCIe",            /* 0x15 */
            "8.0 GT/s PCIe",            /* 0x16 */
            "16.0 GT/s PCIe",           /* 0x17 */
            "32.0 GT/s PCIe",           /* 0x18 */
            "64.0 GT/s PCIe",           /* 0x19 */
        };

        if (speed < ARRAY_SIZE(speed_strings))
                return speed_strings[speed];
        return "Unknown";
}
EXPORT_SYMBOL_GPL(pci_speed_string);

void pcie_update_link_speed(struct pci_bus *bus)
{
        struct pci_dev *bridge = bus->self;
        u16 linksta;

        pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta);
        __pcie_update_link_speed(bus, linksta);
}
EXPORT_SYMBOL_GPL(pcie_update_link_speed);

static unsigned char agp_speeds[] = {
        AGP_UNKNOWN,
        AGP_1X,
        AGP_2X,
        AGP_4X,
        AGP_8X
};

static enum pci_bus_speed agp_speed(int agp3, int agpstat)
{
        int index = 0;

        if (agpstat & 4)
                index = 3;
        else if (agpstat & 2)
                index = 2;
        else if (agpstat & 1)
                index = 1;
        else
                goto out;

        if (agp3) {
                index += 2;
                if (index == 5)
                        index = 0;
        }

 out:
        return agp_speeds[index];
}

static void pci_set_bus_speed(struct pci_bus *bus)
{
        struct pci_dev *bridge = bus->self;
        int pos;

        pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
        if (!pos)
                pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
        if (pos) {
                u32 agpstat, agpcmd;

                pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
                bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);

                pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
                bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
        }

        pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
        if (pos) {
                u16 status;
                enum pci_bus_speed max;

                pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS,
                                     &status);

                if (status & PCI_X_SSTATUS_533MHZ) {
                        max = PCI_SPEED_133MHz_PCIX_533;
                } else if (status & PCI_X_SSTATUS_266MHZ) {
                        max = PCI_SPEED_133MHz_PCIX_266;
                } else if (status & PCI_X_SSTATUS_133MHZ) {
                        if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2)
                                max = PCI_SPEED_133MHz_PCIX_ECC;
                        else
                                max = PCI_SPEED_133MHz_PCIX;
                } else {
                        max = PCI_SPEED_66MHz_PCIX;
                }

                bus->max_bus_speed = max;
                bus->cur_bus_speed =
                        pcix_bus_speed[FIELD_GET(PCI_X_SSTATUS_FREQ, status)];

                return;
        }

        if (pci_is_pcie(bridge)) {
                u32 linkcap;

                pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap);
                bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS];

                pcie_update_link_speed(bus);
        }
}

static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
{
        struct irq_domain *d;

        /* If the host bridge driver sets a MSI domain of the bridge, use it */
        d = dev_get_msi_domain(bus->bridge);

        /*
         * Any firmware interface that can resolve the msi_domain
         * should be called from here.
         */
        if (!d)
                d = pci_host_bridge_of_msi_domain(bus);
        if (!d)
                d = pci_host_bridge_acpi_msi_domain(bus);

        /*
         * If no IRQ domain was found via the OF tree, try looking it up
         * directly through the fwnode_handle.
         */
        if (!d) {
                struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus);

                if (fwnode)
                        d = irq_find_matching_fwnode(fwnode,
                                                     DOMAIN_BUS_PCI_MSI);
        }

        return d;
}

static void pci_set_bus_msi_domain(struct pci_bus *bus)
{
        struct irq_domain *d;
        struct pci_bus *b;

        /*
         * The bus can be a root bus, a subordinate bus, or a virtual bus
         * created by an SR-IOV device.  Walk up to the first bridge device
         * found or derive the domain from the host bridge.
         */
        for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) {
                if (b->self)
                        d = dev_get_msi_domain(&b->self->dev);
        }

        if (!d)
                d = pci_host_bridge_msi_domain(b);

        dev_set_msi_domain(&bus->dev, d);
}

static bool pci_preserve_config(struct pci_host_bridge *host_bridge)
{
        if (pci_acpi_preserve_config(host_bridge))
                return true;

        if (host_bridge->dev.parent && host_bridge->dev.parent->of_node)
                return of_pci_preserve_config(host_bridge->dev.parent->of_node);

        return false;
}

static int pci_register_host_bridge(struct pci_host_bridge *bridge)
{
        struct device *parent = bridge->dev.parent;
        struct resource_entry *window, *next, *n;
        struct pci_bus *bus, *b;
        resource_size_t offset, next_offset;
        LIST_HEAD(resources);
        struct resource *res, *next_res;
        char addr[64], *fmt;
        const char *name;
        int err;

        bus = pci_alloc_bus(NULL);
        if (!bus)
                return -ENOMEM;

        bridge->bus = bus;

        bus->sysdata = bridge->sysdata;
        bus->ops = bridge->ops;
        bus->number = bus->busn_res.start = bridge->busnr;
#ifdef CONFIG_PCI_DOMAINS_GENERIC
        if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
                bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
        else
                bus->domain_nr = bridge->domain_nr;
        if (bus->domain_nr < 0) {
                err = bus->domain_nr;
                goto free;
        }
#endif

        b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
        if (b) {
                /* Ignore it if we already got here via a different bridge */
                dev_dbg(&b->dev, "bus already known\n");
                err = -EEXIST;
                goto free;
        }

        dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus),
                     bridge->busnr);

        err = pcibios_root_bridge_prepare(bridge);
        if (err)
                goto free;

        /* Temporarily move resources off the list */
        list_splice_init(&bridge->windows, &resources);
        err = device_add(&bridge->dev);
        if (err) {
                put_device(&bridge->dev);
                goto free;
        }
        bus->bridge = get_device(&bridge->dev);
        device_enable_async_suspend(bus->bridge);
        pci_set_bus_of_node(bus);
        pci_set_bus_msi_domain(bus);
        if (bridge->msi_domain && !dev_get_msi_domain(&bus->dev) &&
            !pci_host_of_has_msi_map(parent))
                bus->bus_flags |= PCI_BUS_FLAGS_NO_MSI;

        if (!parent)
                set_dev_node(bus->bridge, pcibus_to_node(bus));

        bus->dev.class = &pcibus_class;
        bus->dev.parent = bus->bridge;

        dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number);
        name = dev_name(&bus->dev);

        err = device_register(&bus->dev);
        if (err)
                goto unregister;

        pcibios_add_bus(bus);

        if (bus->ops->add_bus) {
                err = bus->ops->add_bus(bus);
                if (WARN_ON(err < 0))
                        dev_err(&bus->dev, "failed to add bus: %d\n", err);
        }

        /* Create legacy_io and legacy_mem files for this bus */
        pci_create_legacy_files(bus);

        if (parent)
                dev_info(parent, "PCI host bridge to bus %s\n", name);
        else
                pr_info("PCI host bridge to bus %s\n", name);

        if (nr_node_ids > 1 && pcibus_to_node(bus) == NUMA_NO_NODE)
                dev_warn(&bus->dev, "Unknown NUMA node; performance will be reduced\n");

        /* Check if the boot configuration by FW needs to be preserved */
        bridge->preserve_config = pci_preserve_config(bridge);

        /* Coalesce contiguous windows */
        resource_list_for_each_entry_safe(window, n, &resources) {
                if (list_is_last(&window->node, &resources))
                        break;

                next = list_next_entry(window, node);
                offset = window->offset;
                res = window->res;
                next_offset = next->offset;
                next_res = next->res;

                if (res->flags != next_res->flags || offset != next_offset)
                        continue;

                if (res->end + 1 == next_res->start) {
                        next_res->start = res->start;
                        res->flags = res->start = res->end = 0;
                }
        }

        /* Add initial resources to the bus */
        resource_list_for_each_entry_safe(window, n, &resources) {
                offset = window->offset;
                res = window->res;
                if (!res->flags && !res->start && !res->end) {
                        release_resource(res);
                        resource_list_destroy_entry(window);
                        continue;
                }

                list_move_tail(&window->node, &bridge->windows);

                if (res->flags & IORESOURCE_BUS)
                        pci_bus_insert_busn_res(bus, bus->number, res->end);
                else
                        pci_bus_add_resource(bus, res);

                if (offset) {
                        if (resource_type(res) == IORESOURCE_IO)
                                fmt = " (bus address [%#06llx-%#06llx])";
                        else
                                fmt = " (bus address [%#010llx-%#010llx])";

                        snprintf(addr, sizeof(addr), fmt,
                                 (unsigned long long)(res->start - offset),
                                 (unsigned long long)(res->end - offset));
                } else
                        addr[0] = '\0';

                dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr);
        }

        down_write(&pci_bus_sem);
        list_add_tail(&bus->node, &pci_root_buses);
        up_write(&pci_bus_sem);

        return 0;

unregister:
        put_device(&bridge->dev);
        device_del(&bridge->dev);

free:
#ifdef CONFIG_PCI_DOMAINS_GENERIC
        pci_bus_release_domain_nr(parent, bus->domain_nr);
#endif
        kfree(bus);
        return err;
}

static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge)
{
        int pos;
        u32 status;

        /*
         * If extended config space isn't accessible on a bridge's primary
         * bus, we certainly can't access it on the secondary bus.
         */
        if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
                return false;

        /*
         * PCIe Root Ports and switch ports are PCIe on both sides, so if
         * extended config space is accessible on the primary, it's also
         * accessible on the secondary.
         */
        if (pci_is_pcie(bridge) &&
            (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT ||
             pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM ||
             pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM))
                return true;

        /*
         * For the other bridge types:
         *   - PCI-to-PCI bridges
         *   - PCIe-to-PCI/PCI-X forward bridges
         *   - PCI/PCI-X-to-PCIe reverse bridges
         * extended config space on the secondary side is only accessible
         * if the bridge supports PCI-X Mode 2.
         */
        pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
        if (!pos)
                return false;

        pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status);
        return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ);
}

static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
                                           struct pci_dev *bridge, int busnr)
{
        struct pci_bus *child;
        struct pci_host_bridge *host;
        int i;
        int ret;

        /* Allocate a new bus and inherit stuff from the parent */
        child = pci_alloc_bus(parent);
        if (!child)
                return NULL;

        child->parent = parent;
        child->sysdata = parent->sysdata;
        child->bus_flags = parent->bus_flags;

        host = pci_find_host_bridge(parent);
        if (host->child_ops)
                child->ops = host->child_ops;
        else
                child->ops = parent->ops;

        /*
         * Initialize some portions of the bus device, but don't register
         * it now as the parent is not properly set up yet.
         */
        child->dev.class = &pcibus_class;
        dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);

        /* Set up the primary, secondary and subordinate bus numbers */
        child->number = child->busn_res.start = busnr;
        child->primary = parent->busn_res.start;
        child->busn_res.end = 0xff;

        if (!bridge) {
                child->dev.parent = parent->bridge;
                goto add_dev;
        }

        child->self = bridge;
        child->bridge = get_device(&bridge->dev);
        child->dev.parent = child->bridge;
        pci_set_bus_of_node(child);
        pci_set_bus_speed(child);

        /*
         * Check whether extended config space is accessible on the child
         * bus.  Note that we currently assume it is always accessible on
         * the root bus.
         */
        if (!pci_bridge_child_ext_cfg_accessible(bridge)) {
                child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG;
                pci_info(child, "extended config space not accessible\n");
        }

        /* Set up default resource pointers and names */
        for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
                child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
                child->resource[i]->name = child->name;
        }
        bridge->subordinate = child;

add_dev:
        pci_set_bus_msi_domain(child);
        ret = device_register(&child->dev);
        WARN_ON(ret < 0);

        pcibios_add_bus(child);

        if (child->ops->add_bus) {
                ret = child->ops->add_bus(child);
                if (WARN_ON(ret < 0))
                        dev_err(&child->dev, "failed to add bus: %d\n", ret);
        }

        /* Create legacy_io and legacy_mem files for this bus */
        pci_create_legacy_files(child);

        return child;
}

struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
                                int busnr)
{
        struct pci_bus *child;

        child = pci_alloc_child_bus(parent, dev, busnr);
        if (child) {
                down_write(&pci_bus_sem);
                list_add_tail(&child->node, &parent->children);
                up_write(&pci_bus_sem);
        }
        return child;
}
EXPORT_SYMBOL(pci_add_new_bus);

static void pci_enable_rrs_sv(struct pci_dev *pdev)
{
        u16 root_cap = 0;

        /* Enable Configuration RRS Software Visibility if supported */
        pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap);
        if (root_cap & PCI_EXP_RTCAP_RRS_SV) {
                pcie_capability_set_word(pdev, PCI_EXP_RTCTL,
                                         PCI_EXP_RTCTL_RRS_SVE);
                pdev->config_rrs_sv = 1;
        }
}

static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
                                              unsigned int available_buses);
/**
 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus
 * numbers from EA capability.
 * @dev: Bridge
 * @sec: updated with secondary bus number from EA
 * @sub: updated with subordinate bus number from EA
 *
 * If @dev is a bridge with EA capability that specifies valid secondary
 * and subordinate bus numbers, return true with the bus numbers in @sec
 * and @sub.  Otherwise return false.
 */
static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub)
{
        int ea, offset;
        u32 dw;
        u8 ea_sec, ea_sub;

        if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
                return false;

        /* find PCI EA capability in list */
        ea = pci_find_capability(dev, PCI_CAP_ID_EA);
        if (!ea)
                return false;

        offset = ea + PCI_EA_FIRST_ENT;
        pci_read_config_dword(dev, offset, &dw);
        ea_sec = FIELD_GET(PCI_EA_SEC_BUS_MASK, dw);
        ea_sub = FIELD_GET(PCI_EA_SUB_BUS_MASK, dw);
        if (ea_sec  == 0 || ea_sub < ea_sec)
                return false;

        *sec = ea_sec;
        *sub = ea_sub;
        return true;
}

/*
 * pci_scan_bridge_extend() - Scan buses behind a bridge
 * @bus: Parent bus the bridge is on
 * @dev: Bridge itself
 * @max: Starting subordinate number of buses behind this bridge
 * @available_buses: Total number of buses available for this bridge and
 *                   the devices below. After the minimal bus space has
 *                   been allocated the remaining buses will be
 *                   distributed equally between hotplug-capable bridges.
 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
 *        that need to be reconfigured.
 *
 * If it's a bridge, configure it and scan the bus behind it.
 * For CardBus bridges, we don't scan behind as the devices will
 * be handled by the bridge driver itself.
 *
 * We need to process bridges in two passes -- first we scan those
 * already configured by the BIOS and after we are done with all of
 * them, we proceed to assigning numbers to the remaining buses in
 * order to avoid overlaps between old and new bus numbers.
 *
 * Return: New subordinate number covering all buses behind this bridge.
 */
static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
                                  int max, unsigned int available_buses,
                                  int pass)
{
        struct pci_bus *child;
        int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
        u32 buses, i, j = 0;
        u16 bctl;
        u8 primary, secondary, subordinate;
        int broken = 0;
        bool fixed_buses;
        u8 fixed_sec, fixed_sub;
        int next_busnr;

        /*
         * Make sure the bridge is powered on to be able to access config
         * space of devices below it.
         */
        pm_runtime_get_sync(&dev->dev);

        pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
        primary = buses & 0xFF;
        secondary = (buses >> 8) & 0xFF;
        subordinate = (buses >> 16) & 0xFF;

        pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
                secondary, subordinate, pass);

        if (!primary && (primary != bus->number) && secondary && subordinate) {
                pci_warn(dev, "Primary bus is hard wired to 0\n");
                primary = bus->number;
        }

        /* Check if setup is sensible at all */
        if (!pass &&
            (primary != bus->number || secondary <= bus->number ||
             secondary > subordinate)) {
                pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
                         secondary, subordinate);
                broken = 1;
        }

        /*
         * Disable Master-Abort Mode during probing to avoid reporting of
         * bus errors in some architectures.
         */
        pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
        pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
                              bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);

        pci_enable_rrs_sv(dev);

        if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
            !is_cardbus && !broken) {
                unsigned int cmax, buses;

                /*
                 * Bus already configured by firmware, process it in the
                 * first pass and just note the configuration.
                 */
                if (pass)
                        goto out;

                /*
                 * The bus might already exist for two reasons: Either we
                 * are rescanning the bus or the bus is reachable through
                 * more than one bridge. The second case can happen with
                 * the i450NX chipset.
                 */
                child = pci_find_bus(pci_domain_nr(bus), secondary);
                if (!child) {
                        child = pci_add_new_bus(bus, dev, secondary);
                        if (!child)
                                goto out;
                        child->primary = primary;
                        pci_bus_insert_busn_res(child, secondary, subordinate);
                        child->bridge_ctl = bctl;
                }

                buses = subordinate - secondary;
                cmax = pci_scan_child_bus_extend(child, buses);
                if (cmax > subordinate)
                        pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n",
                                 subordinate, cmax);

                /* Subordinate should equal child->busn_res.end */
                if (subordinate > max)
                        max = subordinate;
        } else {

                /*
                 * We need to assign a number to this bus which we always
                 * do in the second pass.
                 */
                if (!pass) {
                        if (pcibios_assign_all_busses() || broken || is_cardbus)

                                /*
                                 * Temporarily disable forwarding of the
                                 * configuration cycles on all bridges in
                                 * this bus segment to avoid possible
                                 * conflicts in the second pass between two
                                 * bridges programmed with overlapping bus
                                 * ranges.
                                 */
                                pci_write_config_dword(dev, PCI_PRIMARY_BUS,
                                                       buses & ~0xffffff);
                        goto out;
                }

                /* Clear errors */
                pci_write_config_word(dev, PCI_STATUS, 0xffff);

                /* Read bus numbers from EA Capability (if present) */
                fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub);
                if (fixed_buses)
                        next_busnr = fixed_sec;
                else
                        next_busnr = max + 1;

                /*
                 * Prevent assigning a bus number that already exists.
                 * This can happen when a bridge is hot-plugged, so in this
                 * case we only re-scan this bus.
                 */
                child = pci_find_bus(pci_domain_nr(bus), next_busnr);
                if (!child) {
                        child = pci_add_new_bus(bus, dev, next_busnr);
                        if (!child)
                                goto out;
                        pci_bus_insert_busn_res(child, next_busnr,
                                                bus->busn_res.end);
                }
                max++;
                if (available_buses)
                        available_buses--;

                buses = (buses & 0xff000000)
                      | ((unsigned int)(child->primary)     <<  0)
                      | ((unsigned int)(child->busn_res.start)   <<  8)
                      | ((unsigned int)(child->busn_res.end) << 16);

                /*
                 * yenta.c forces a secondary latency timer of 176.
                 * Copy that behaviour here.
                 */
                if (is_cardbus) {
                        buses &= ~0xff000000;
                        buses |= CARDBUS_LATENCY_TIMER << 24;
                }

                /* We need to blast all three values with a single write */
                pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);

                if (!is_cardbus) {
                        child->bridge_ctl = bctl;
                        max = pci_scan_child_bus_extend(child, available_buses);
                } else {

                        /*
                         * For CardBus bridges, we leave 4 bus numbers as
                         * cards with a PCI-to-PCI bridge can be inserted
                         * later.
                         */
                        for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) {
                                struct pci_bus *parent = bus;
                                if (pci_find_bus(pci_domain_nr(bus),
                                                        max+i+1))
                                        break;
                                while (parent->parent) {
                                        if ((!pcibios_assign_all_busses()) &&
                                            (parent->busn_res.end > max) &&
                                            (parent->busn_res.end <= max+i)) {
                                                j = 1;
                                        }
                                        parent = parent->parent;
                                }
                                if (j) {

                                        /*
                                         * Often, there are two CardBus
                                         * bridges -- try to leave one
                                         * valid bus number for each one.
                                         */
                                        i /= 2;
                                        break;
                                }
                        }
                        max += i;
                }

                /*
                 * Set subordinate bus number to its real value.
                 * If fixed subordinate bus number exists from EA
                 * capability then use it.
                 */
                if (fixed_buses)
                        max = fixed_sub;
                pci_bus_update_busn_res_end(child, max);
                pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
        }

        sprintf(child->name,
                (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
                pci_domain_nr(bus), child->number);

        /* Check that all devices are accessible */
        while (bus->parent) {
                if ((child->busn_res.end > bus->busn_res.end) ||
                    (child->number > bus->busn_res.end) ||
                    (child->number < bus->number) ||
                    (child->busn_res.end < bus->number)) {
                        dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n",
                                 &child->busn_res);
                        break;
                }
                bus = bus->parent;
        }

out:
        /* Clear errors in the Secondary Status Register */
        pci_write_config_word(dev, PCI_SEC_STATUS, 0xffff);

        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);

        pm_runtime_put(&dev->dev);

        return max;
}

/*
 * pci_scan_bridge() - Scan buses behind a bridge
 * @bus: Parent bus the bridge is on
 * @dev: Bridge itself
 * @max: Starting subordinate number of buses behind this bridge
 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges
 *        that need to be reconfigured.
 *
 * If it's a bridge, configure it and scan the bus behind it.
 * For CardBus bridges, we don't scan behind as the devices will
 * be handled by the bridge driver itself.
 *
 * We need to process bridges in two passes -- first we scan those
 * already configured by the BIOS and after we are done with all of
 * them, we proceed to assigning numbers to the remaining buses in
 * order to avoid overlaps between old and new bus numbers.
 *
 * Return: New subordinate number covering all buses behind this bridge.
 */
int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
{
        return pci_scan_bridge_extend(bus, dev, max, 0, pass);
}
EXPORT_SYMBOL(pci_scan_bridge);

/*
 * Read interrupt line and base address registers.
 * The architecture-dependent code can tweak these, of course.
 */
static void pci_read_irq(struct pci_dev *dev)
{
        unsigned char irq;

        /* VFs are not allowed to use INTx, so skip the config reads */
        if (dev->is_virtfn) {
                dev->pin = 0;
                dev->irq = 0;
                return;
        }

        pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
        dev->pin = irq;
        if (irq)
                pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
        dev->irq = irq;
}

void set_pcie_port_type(struct pci_dev *pdev)
{
        int pos;
        u16 reg16;
        u32 reg32;
        int type;
        struct pci_dev *parent;

        pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
        if (!pos)
                return;

        pdev->pcie_cap = pos;
        pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
        pdev->pcie_flags_reg = reg16;
        pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &pdev->devcap);
        pdev->pcie_mpss = FIELD_GET(PCI_EXP_DEVCAP_PAYLOAD, pdev->devcap);

        pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &reg32);
        if (reg32 & PCI_EXP_LNKCAP_DLLLARC)
                pdev->link_active_reporting = 1;

        parent = pci_upstream_bridge(pdev);
        if (!parent)
                return;

        /*
         * Some systems do not identify their upstream/downstream ports
         * correctly so detect impossible configurations here and correct
         * the port type accordingly.
         */
        type = pci_pcie_type(pdev);
        if (type == PCI_EXP_TYPE_DOWNSTREAM) {
                /*
                 * If pdev claims to be downstream port but the parent
                 * device is also downstream port assume pdev is actually
                 * upstream port.
                 */
                if (pcie_downstream_port(parent)) {
                        pci_info(pdev, "claims to be downstream port but is acting as upstream port, correcting type\n");
                        pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
                        pdev->pcie_flags_reg |= PCI_EXP_TYPE_UPSTREAM;
                }
        } else if (type == PCI_EXP_TYPE_UPSTREAM) {
                /*
                 * If pdev claims to be upstream port but the parent
                 * device is also upstream port assume pdev is actually
                 * downstream port.
                 */
                if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM) {
                        pci_info(pdev, "claims to be upstream port but is acting as downstream port, correcting type\n");
                        pdev->pcie_flags_reg &= ~PCI_EXP_FLAGS_TYPE;
                        pdev->pcie_flags_reg |= PCI_EXP_TYPE_DOWNSTREAM;
                }
        }
}

void set_pcie_hotplug_bridge(struct pci_dev *pdev)
{
        u32 reg32;

        pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &reg32);
        if (reg32 & PCI_EXP_SLTCAP_HPC)
                pdev->is_hotplug_bridge = 1;
}

static void set_pcie_thunderbolt(struct pci_dev *dev)
{
        u16 vsec;

        /* Is the device part of a Thunderbolt controller? */
        vsec = pci_find_vsec_capability(dev, PCI_VENDOR_ID_INTEL, PCI_VSEC_ID_INTEL_TBT);
        if (vsec)
                dev->is_thunderbolt = 1;
}

static void set_pcie_untrusted(struct pci_dev *dev)
{
        struct pci_dev *parent = pci_upstream_bridge(dev);

        if (!parent)
                return;
        /*
         * If the upstream bridge is untrusted we treat this device as
         * untrusted as well.
         */
        if (parent->untrusted) {
                dev->untrusted = true;
                return;
        }

        if (arch_pci_dev_is_removable(dev)) {
                pci_dbg(dev, "marking as untrusted\n");
                dev->untrusted = true;
        }
}

static void pci_set_removable(struct pci_dev *dev)
{
        struct pci_dev *parent = pci_upstream_bridge(dev);

        if (!parent)
                return;
        /*
         * We (only) consider everything tunneled below an external_facing
         * device to be removable by the user. We're mainly concerned with
         * consumer platforms with user accessible thunderbolt ports that are
         * vulnerable to DMA attacks, and we expect those ports to be marked by
         * the firmware as external_facing. Devices in traditional hotplug
         * slots can technically be removed, but the expectation is that unless
         * the port is marked with external_facing, such devices are less
         * accessible to user / may not be removed by end user, and thus not
         * exposed as "removable" to userspace.
         */
        if (dev_is_removable(&parent->dev)) {
                dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
                return;
        }

        if (arch_pci_dev_is_removable(dev)) {
                pci_dbg(dev, "marking as removable\n");
                dev_set_removable(&dev->dev, DEVICE_REMOVABLE);
        }
}

/**
 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config?
 * @dev: PCI device
 *
 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that
 * when forwarding a type1 configuration request the bridge must check that
 * the extended register address field is zero.  The bridge is not permitted
 * to forward the transactions and must handle it as an Unsupported Request.
 * Some bridges do not follow this rule and simply drop the extended register
 * bits, resulting in the standard config space being aliased, every 256
 * bytes across the entire configuration space.  Test for this condition by
 * comparing the first dword of each potential alias to the vendor/device ID.
 * Known offenders:
 *   ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03)
 *   AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40)
 */
static bool pci_ext_cfg_is_aliased(struct pci_dev *dev)
{
#ifdef CONFIG_PCI_QUIRKS
        int pos, ret;
        u32 header, tmp;

        pci_read_config_dword(dev, PCI_VENDOR_ID, &header);

        for (pos = PCI_CFG_SPACE_SIZE;
             pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) {
                ret = pci_read_config_dword(dev, pos, &tmp);
                if ((ret != PCIBIOS_SUCCESSFUL) || (header != tmp))
                        return false;
        }

        return true;
#else
        return false;
#endif
}

/**
 * pci_cfg_space_size_ext - Get the configuration space size of the PCI device
 * @dev: PCI device
 *
 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
 * have 4096 bytes.  Even if the device is capable, that doesn't mean we can
 * access it.  Maybe we don't have a way to generate extended config space
 * accesses, or the device is behind a reverse Express bridge.  So we try
 * reading the dword at 0x100 which must either be 0 or a valid extended
 * capability header.
 */
static int pci_cfg_space_size_ext(struct pci_dev *dev)
{
        u32 status;
        int pos = PCI_CFG_SPACE_SIZE;

        if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
                return PCI_CFG_SPACE_SIZE;
        if (PCI_POSSIBLE_ERROR(status) || pci_ext_cfg_is_aliased(dev))
                return PCI_CFG_SPACE_SIZE;

        return PCI_CFG_SPACE_EXP_SIZE;
}

int pci_cfg_space_size(struct pci_dev *dev)
{
        int pos;
        u32 status;
        u16 class;

#ifdef CONFIG_PCI_IOV
        /*
         * Per the SR-IOV specification (rev 1.1, sec 3.5), VFs are required to
         * implement a PCIe capability and therefore must implement extended
         * config space.  We can skip the NO_EXTCFG test below and the
         * reachability/aliasing test in pci_cfg_space_size_ext() by virtue of
         * the fact that the SR-IOV capability on the PF resides in extended
         * config space and must be accessible and non-aliased to have enabled
         * support for this VF.  This is a micro performance optimization for
         * systems supporting many VFs.
         */
        if (dev->is_virtfn)
                return PCI_CFG_SPACE_EXP_SIZE;
#endif

        if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
                return PCI_CFG_SPACE_SIZE;

        class = dev->class >> 8;
        if (class == PCI_CLASS_BRIDGE_HOST)
                return pci_cfg_space_size_ext(dev);

        if (pci_is_pcie(dev))
                return pci_cfg_space_size_ext(dev);

        pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
        if (!pos)
                return PCI_CFG_SPACE_SIZE;

        pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
        if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ))
                return pci_cfg_space_size_ext(dev);

        return PCI_CFG_SPACE_SIZE;
}

static u32 pci_class(struct pci_dev *dev)
{
        u32 class;

#ifdef CONFIG_PCI_IOV
        if (dev->is_virtfn)
                return dev->physfn->sriov->class;
#endif
        pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
        return class;
}

static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device)
{
#ifdef CONFIG_PCI_IOV
        if (dev->is_virtfn) {
                *vendor = dev->physfn->sriov->subsystem_vendor;
                *device = dev->physfn->sriov->subsystem_device;
                return;
        }
#endif
        pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor);
        pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device);
}

static u8 pci_hdr_type(struct pci_dev *dev)
{
        u8 hdr_type;

#ifdef CONFIG_PCI_IOV
        if (dev->is_virtfn)
                return dev->physfn->sriov->hdr_type;
#endif
        pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
        return hdr_type;
}

#define LEGACY_IO_RESOURCE      (IORESOURCE_IO | IORESOURCE_PCI_FIXED)

/**
 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability
 * @dev: PCI device
 *
 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev.  Check this
 * at enumeration-time to avoid modifying PCI_COMMAND at run-time.
 */
static int pci_intx_mask_broken(struct pci_dev *dev)
{
        u16 orig, toggle, new;

        pci_read_config_word(dev, PCI_COMMAND, &orig);
        toggle = orig ^ PCI_COMMAND_INTX_DISABLE;
        pci_write_config_word(dev, PCI_COMMAND, toggle);
        pci_read_config_word(dev, PCI_COMMAND, &new);

        pci_write_config_word(dev, PCI_COMMAND, orig);

        /*
         * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI
         * r2.3, so strictly speaking, a device is not *broken* if it's not
         * writable.  But we'll live with the misnomer for now.
         */
        if (new != toggle)
                return 1;
        return 0;
}

static void early_dump_pci_device(struct pci_dev *pdev)
{
        u32 value[256 / 4];
        int i;

        pci_info(pdev, "config space:\n");

        for (i = 0; i < 256; i += 4)
                pci_read_config_dword(pdev, i, &value[i / 4]);

        print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
                       value, 256, false);
}

static const char *pci_type_str(struct pci_dev *dev)
{
        static const char * const str[] = {
                "PCIe Endpoint",
                "PCIe Legacy Endpoint",
                "PCIe unknown",
                "PCIe unknown",
                "PCIe Root Port",
                "PCIe Switch Upstream Port",
                "PCIe Switch Downstream Port",
                "PCIe to PCI/PCI-X bridge",
                "PCI/PCI-X to PCIe bridge",
                "PCIe Root Complex Integrated Endpoint",
                "PCIe Root Complex Event Collector",
        };
        int type;

        if (pci_is_pcie(dev)) {
                type = pci_pcie_type(dev);
                if (type < ARRAY_SIZE(str))
                        return str[type];

                return "PCIe unknown";
        }

        switch (dev->hdr_type) {
        case PCI_HEADER_TYPE_NORMAL:
                return "conventional PCI endpoint";
        case PCI_HEADER_TYPE_BRIDGE:
                return "conventional PCI bridge";
        case PCI_HEADER_TYPE_CARDBUS:
                return "CardBus bridge";
        default:
                return "conventional PCI";
        }
}

/**
 * pci_setup_device - Fill in class and map information of a device
 * @dev: the device structure to fill
 *
 * Initialize the device structure with information about the device's
 * vendor,class,memory and IO-space addresses, IRQ lines etc.
 * Called at initialisation of the PCI subsystem and by CardBus services.
 * Returns 0 on success and negative if unknown type of device (not normal,
 * bridge or CardBus).
 */
int pci_setup_device(struct pci_dev *dev)
{
        u32 class;
        u16 cmd;
        u8 hdr_type;
        int err, pos = 0;
        struct pci_bus_region region;
        struct resource *res;

        hdr_type = pci_hdr_type(dev);

        dev->sysdata = dev->bus->sysdata;
        dev->dev.parent = dev->bus->bridge;
        dev->dev.bus = &pci_bus_type;
        dev->hdr_type = hdr_type & 0x7f;
        dev->multifunction = !!(hdr_type & 0x80);
        dev->error_state = pci_channel_io_normal;
        set_pcie_port_type(dev);

        err = pci_set_of_node(dev);
        if (err)
                return err;
        pci_set_acpi_fwnode(dev);

        pci_dev_assign_slot(dev);

        /*
         * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
         * set this higher, assuming the system even supports it.
         */
        dev->dma_mask = 0xffffffff;

        dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
                     dev->bus->number, PCI_SLOT(dev->devfn),
                     PCI_FUNC(dev->devfn));

        class = pci_class(dev);

        dev->revision = class & 0xff;
        dev->class = class >> 8;                    /* upper 3 bytes */

        if (pci_early_dump)
                early_dump_pci_device(dev);

        /* Need to have dev->class ready */
        dev->cfg_size = pci_cfg_space_size(dev);

        /* Need to have dev->cfg_size ready */
        set_pcie_thunderbolt(dev);

        set_pcie_untrusted(dev);

        if (pci_is_pcie(dev))
                dev->supported_speeds = pcie_get_supported_speeds(dev);

        /* "Unknown power state" */
        dev->current_state = PCI_UNKNOWN;

        /* Early fixups, before probing the BARs */
        pci_fixup_device(pci_fixup_early, dev);

        pci_set_removable(dev);

        pci_info(dev, "[%04x:%04x] type %02x class %#08x %s\n",
                 dev->vendor, dev->device, dev->hdr_type, dev->class,
                 pci_type_str(dev));

        /* Device class may be changed after fixup */
        class = dev->class >> 8;

        if (dev->non_compliant_bars && !dev->mmio_always_on) {
                pci_read_config_word(dev, PCI_COMMAND, &cmd);
                if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
                        pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
                        cmd &= ~PCI_COMMAND_IO;
                        cmd &= ~PCI_COMMAND_MEMORY;
                        pci_write_config_word(dev, PCI_COMMAND, cmd);
                }
        }

        dev->broken_intx_masking = pci_intx_mask_broken(dev);

        switch (dev->hdr_type) {                    /* header type */
        case PCI_HEADER_TYPE_NORMAL:                /* standard header */
                if (class == PCI_CLASS_BRIDGE_PCI)
                        goto bad;
                pci_read_irq(dev);
                pci_read_bases(dev, 6, PCI_ROM_ADDRESS);

                pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device);

                /*
                 * Do the ugly legacy mode stuff here rather than broken chip
                 * quirk code. Legacy mode ATA controllers have fixed
                 * addresses. These are not always echoed in BAR0-3, and
                 * BAR0-3 in a few cases contain junk!
                 */
                if (class == PCI_CLASS_STORAGE_IDE) {
                        u8 progif;
                        pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
                        if ((progif & 1) == 0) {
                                region.start = 0x1F0;
                                region.end = 0x1F7;
                                res = &dev->resource[0];
                                res->flags = LEGACY_IO_RESOURCE;
                                pcibios_bus_to_resource(dev->bus, res, &region);
                                pci_info(dev, "BAR 0 %pR: legacy IDE quirk\n",
                                         res);
                                region.start = 0x3F6;
                                region.end = 0x3F6;
                                res = &dev->resource[1];
                                res->flags = LEGACY_IO_RESOURCE;
                                pcibios_bus_to_resource(dev->bus, res, &region);
                                pci_info(dev, "BAR 1 %pR: legacy IDE quirk\n",
                                         res);
                        }
                        if ((progif & 4) == 0) {
                                region.start = 0x170;
                                region.end = 0x177;
                                res = &dev->resource[2];
                                res->flags = LEGACY_IO_RESOURCE;
                                pcibios_bus_to_resource(dev->bus, res, &region);
                                pci_info(dev, "BAR 2 %pR: legacy IDE quirk\n",
                                         res);
                                region.start = 0x376;
                                region.end = 0x376;
                                res = &dev->resource[3];
                                res->flags = LEGACY_IO_RESOURCE;
                                pcibios_bus_to_resource(dev->bus, res, &region);
                                pci_info(dev, "BAR 3 %pR: legacy IDE quirk\n",
                                         res);
                        }
                }
                break;

        case PCI_HEADER_TYPE_BRIDGE:                /* bridge header */
                /*
                 * The PCI-to-PCI bridge spec requires that subtractive
                 * decoding (i.e. transparent) bridge must have programming
                 * interface code of 0x01.
                 */
                pci_read_irq(dev);
                dev->transparent = ((dev->class & 0xff) == 1);
                pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
                pci_read_bridge_windows(dev);
                set_pcie_hotplug_bridge(dev);
                pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
                if (pos) {
                        pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
                        pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
                }
                break;

        case PCI_HEADER_TYPE_CARDBUS:               /* CardBus bridge header */
                if (class != PCI_CLASS_BRIDGE_CARDBUS)
                        goto bad;
                pci_read_irq(dev);
                pci_read_bases(dev, 1, 0);
                pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
                pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
                break;

        default:                                    /* unknown header */
                pci_err(dev, "unknown header type %02x, ignoring device\n",
                        dev->hdr_type);
                pci_release_of_node(dev);
                return -EIO;

        bad:
                pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n",
                        dev->class, dev->hdr_type);
                dev->class = PCI_CLASS_NOT_DEFINED << 8;
        }

        /* We found a fine healthy device, go go go... */
        return 0;
}

static void pci_configure_mps(struct pci_dev *dev)
{
        struct pci_dev *bridge = pci_upstream_bridge(dev);
        int mps, mpss, p_mps, rc;

        if (!pci_is_pcie(dev))
                return;

        /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */
        if (dev->is_virtfn)
                return;

        /*
         * For Root Complex Integrated Endpoints, program the maximum
         * supported value unless limited by the PCIE_BUS_PEER2PEER case.
         */
        if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) {
                if (pcie_bus_config == PCIE_BUS_PEER2PEER)
                        mps = 128;
                else
                        mps = 128 << dev->pcie_mpss;
                rc = pcie_set_mps(dev, mps);
                if (rc) {
                        pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
                                 mps);
                }
                return;
        }

        if (!bridge || !pci_is_pcie(bridge))
                return;

        mps = pcie_get_mps(dev);
        p_mps = pcie_get_mps(bridge);

        if (mps == p_mps)
                return;

        if (pcie_bus_config == PCIE_BUS_TUNE_OFF) {
                pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
                         mps, pci_name(bridge), p_mps);
                return;
        }

        /*
         * Fancier MPS configuration is done later by
         * pcie_bus_configure_settings()
         */
        if (pcie_bus_config != PCIE_BUS_DEFAULT)
                return;

        mpss = 128 << dev->pcie_mpss;
        if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) {
                pcie_set_mps(bridge, mpss);
                pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n",
                         mpss, p_mps, 128 << bridge->pcie_mpss);
                p_mps = pcie_get_mps(bridge);
        }

        rc = pcie_set_mps(dev, p_mps);
        if (rc) {
                pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n",
                         p_mps);
                return;
        }

        pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n",
                 p_mps, mps, mpss);
}

int pci_configure_extended_tags(struct pci_dev *dev, void *ign)
{
        struct pci_host_bridge *host;
        u32 cap;
        u16 ctl;
        int ret;

        if (!pci_is_pcie(dev))
                return 0;

        ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
        if (ret)
                return 0;

        if (!(cap & PCI_EXP_DEVCAP_EXT_TAG))
                return 0;

        ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl);
        if (ret)
                return 0;

        host = pci_find_host_bridge(dev->bus);
        if (!host)
                return 0;

        /*
         * If some device in the hierarchy doesn't handle Extended Tags
         * correctly, make sure they're disabled.
         */
        if (host->no_ext_tags) {
                if (ctl & PCI_EXP_DEVCTL_EXT_TAG) {
                        pci_info(dev, "disabling Extended Tags\n");
                        pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
                                                   PCI_EXP_DEVCTL_EXT_TAG);
                }
                return 0;
        }

        if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) {
                pci_info(dev, "enabling Extended Tags\n");
                pcie_capability_set_word(dev, PCI_EXP_DEVCTL,
                                         PCI_EXP_DEVCTL_EXT_TAG);
        }
        return 0;
}

/**
 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable
 * @dev: PCI device to query
 *
 * Returns true if the device has enabled relaxed ordering attribute.
 */
bool pcie_relaxed_ordering_enabled(struct pci_dev *dev)
{
        u16 v;

        pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v);

        return !!(v & PCI_EXP_DEVCTL_RELAX_EN);
}
EXPORT_SYMBOL(pcie_relaxed_ordering_enabled);

static void pci_configure_relaxed_ordering(struct pci_dev *dev)
{
        struct pci_dev *root;

        /* PCI_EXP_DEVCTL_RELAX_EN is RsvdP in VFs */
        if (dev->is_virtfn)
                return;

        if (!pcie_relaxed_ordering_enabled(dev))
                return;

        /*
         * For now, we only deal with Relaxed Ordering issues with Root
         * Ports. Peer-to-Peer DMA is another can of worms.
         */
        root = pcie_find_root_port(dev);
        if (!root)
                return;

        if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) {
                pcie_capability_clear_word(dev, PCI_EXP_DEVCTL,
                                           PCI_EXP_DEVCTL_RELAX_EN);
                pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n");
        }
}

static void pci_configure_eetlp_prefix(struct pci_dev *dev)
{
#ifdef CONFIG_PCI_PASID
        struct pci_dev *bridge;
        int pcie_type;
        u32 cap;

        if (!pci_is_pcie(dev))
                return;

        pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
        if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX))
                return;

        pcie_type = pci_pcie_type(dev);
        if (pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
            pcie_type == PCI_EXP_TYPE_RC_END)
                dev->eetlp_prefix_path = 1;
        else {
                bridge = pci_upstream_bridge(dev);
                if (bridge && bridge->eetlp_prefix_path)
                        dev->eetlp_prefix_path = 1;
        }
#endif
}

static void pci_configure_serr(struct pci_dev *dev)
{
        u16 control;

        if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {

                /*
                 * A bridge will not forward ERR_ messages coming from an
                 * endpoint unless SERR# forwarding is enabled.
                 */
                pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control);
                if (!(control & PCI_BRIDGE_CTL_SERR)) {
                        control |= PCI_BRIDGE_CTL_SERR;
                        pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control);
                }
        }
}

static void pci_configure_device(struct pci_dev *dev)
{
        pci_configure_mps(dev);
        pci_configure_extended_tags(dev, NULL);
        pci_configure_relaxed_ordering(dev);
        pci_configure_ltr(dev);
        pci_configure_aspm_l1ss(dev);
        pci_configure_eetlp_prefix(dev);
        pci_configure_serr(dev);

        pci_acpi_program_hp_params(dev);
}

static void pci_release_capabilities(struct pci_dev *dev)
{
        pci_aer_exit(dev);
        pci_rcec_exit(dev);
        pci_iov_release(dev);
        pci_free_cap_save_buffers(dev);
}

/**
 * pci_release_dev - Free a PCI device structure when all users of it are
 *                   finished
 * @dev: device that's been disconnected
 *
 * Will be called only by the device core when all users of this PCI device are
 * done.
 */
static void pci_release_dev(struct device *dev)
{
        struct pci_dev *pci_dev;

        pci_dev = to_pci_dev(dev);
        pci_release_capabilities(pci_dev);
        pci_release_of_node(pci_dev);
        pcibios_release_device(pci_dev);
        pci_bus_put(pci_dev->bus);
        kfree(pci_dev->driver_override);
        bitmap_free(pci_dev->dma_alias_mask);
        dev_dbg(dev, "device released\n");
        kfree(pci_dev);
}

static const struct device_type pci_dev_type = {
        .groups = pci_dev_attr_groups,
};

struct pci_dev *pci_alloc_dev(struct pci_bus *bus)
{
        struct pci_dev *dev;

        dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
        if (!dev)
                return NULL;

        INIT_LIST_HEAD(&dev->bus_list);
        dev->dev.type = &pci_dev_type;
        dev->bus = pci_bus_get(bus);
        dev->driver_exclusive_resource = (struct resource) {
                .name = "PCI Exclusive",
                .start = 0,
                .end = -1,
        };

        spin_lock_init(&dev->pcie_cap_lock);
#ifdef CONFIG_PCI_MSI
        raw_spin_lock_init(&dev->msi_lock);
#endif
        return dev;
}
EXPORT_SYMBOL(pci_alloc_dev);

static bool pci_bus_wait_rrs(struct pci_bus *bus, int devfn, u32 *l,
                             int timeout)
{
        int delay = 1;

        if (!pci_bus_rrs_vendor_id(*l))
                return true;    /* not a Configuration RRS completion */

        if (!timeout)
                return false;   /* RRS, but caller doesn't want to wait */

        /*
         * We got the reserved Vendor ID that indicates a completion with
         * Configuration Request Retry Status (RRS).  Retry until we get a
         * valid Vendor ID or we time out.
         */
        while (pci_bus_rrs_vendor_id(*l)) {
                if (delay > timeout) {
                        pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n",
                                pci_domain_nr(bus), bus->number,
                                PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);

                        return false;
                }
                if (delay >= 1000)
                        pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n",
                                pci_domain_nr(bus), bus->number,
                                PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);

                msleep(delay);
                delay *= 2;

                if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
                        return false;
        }

        if (delay >= 1000)
                pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n",
                        pci_domain_nr(bus), bus->number,
                        PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1);

        return true;
}

bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
                                        int timeout)
{
        if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
                return false;

        /* Some broken boards return 0 or ~0 (PCI_ERROR_RESPONSE) if a slot is empty: */
        if (PCI_POSSIBLE_ERROR(*l) || *l == 0x00000000 ||
            *l == 0x0000ffff || *l == 0xffff0000)
                return false;

        if (pci_bus_rrs_vendor_id(*l))
                return pci_bus_wait_rrs(bus, devfn, l, timeout);

        return true;
}

bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
                                int timeout)
{
#ifdef CONFIG_PCI_QUIRKS
        struct pci_dev *bridge = bus->self;

        /*
         * Certain IDT switches have an issue where they improperly trigger
         * ACS Source Validation errors on completions for config reads.
         */
        if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT &&
            bridge->device == 0x80b5)
                return pci_idt_bus_quirk(bus, devfn, l, timeout);
#endif

        return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout);
}
EXPORT_SYMBOL(pci_bus_read_dev_vendor_id);

/*
 * Read the config data for a PCI device, sanity-check it,
 * and fill in the dev structure.
 */
static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
{
        struct pci_dev *dev;
        u32 l;

        if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000))
                return NULL;

        dev = pci_alloc_dev(bus);
        if (!dev)
                return NULL;

        dev->devfn = devfn;
        dev->vendor = l & 0xffff;
        dev->device = (l >> 16) & 0xffff;

        if (pci_setup_device(dev)) {
                pci_bus_put(dev->bus);
                kfree(dev);
                return NULL;
        }

        return dev;
}

void pcie_report_downtraining(struct pci_dev *dev)
{
        if (!pci_is_pcie(dev))
                return;

        /* Look from the device up to avoid downstream ports with no devices */
        if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) &&
            (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) &&
            (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM))
                return;

        /* Multi-function PCIe devices share the same link/status */
        if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn)
                return;

        /* Print link status only if the device is constrained by the fabric */
        __pcie_print_link_status(dev, false);
}

static void pci_init_capabilities(struct pci_dev *dev)
{
        pci_ea_init(dev);               /* Enhanced Allocation */
        pci_msi_init(dev);              /* Disable MSI */
        pci_msix_init(dev);             /* Disable MSI-X */

        /* Buffers for saving PCIe and PCI-X capabilities */
        pci_allocate_cap_save_buffers(dev);

        pci_pm_init(dev);               /* Power Management */
        pci_vpd_init(dev);              /* Vital Product Data */
        pci_configure_ari(dev);         /* Alternative Routing-ID Forwarding */
        pci_iov_init(dev);              /* Single Root I/O Virtualization */
        pci_ats_init(dev);              /* Address Translation Services */
        pci_pri_init(dev);              /* Page Request Interface */
        pci_pasid_init(dev);            /* Process Address Space ID */
        pci_acs_init(dev);              /* Access Control Services */
        pci_ptm_init(dev);              /* Precision Time Measurement */
        pci_aer_init(dev);              /* Advanced Error Reporting */
        pci_dpc_init(dev);              /* Downstream Port Containment */
        pci_rcec_init(dev);             /* Root Complex Event Collector */
        pci_doe_init(dev);              /* Data Object Exchange */
        pci_tph_init(dev);              /* TLP Processing Hints */

        pcie_report_downtraining(dev);
        pci_init_reset_methods(dev);
}

/*
 * This is the equivalent of pci_host_bridge_msi_domain() that acts on
 * devices. Firmware interfaces that can select the MSI domain on a
 * per-device basis should be called from here.
 */
static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev)
{
        struct irq_domain *d;

        /*
         * If a domain has been set through the pcibios_device_add()
         * callback, then this is the one (platform code knows best).
         */
        d = dev_get_msi_domain(&dev->dev);
        if (d)
                return d;

        /*
         * Let's see if we have a firmware interface able to provide
         * the domain.
         */
        d = pci_msi_get_device_domain(dev);
        if (d)
                return d;

        return NULL;
}

static void pci_set_msi_domain(struct pci_dev *dev)
{
        struct irq_domain *d;

        /*
         * If the platform or firmware interfaces cannot supply a
         * device-specific MSI domain, then inherit the default domain
         * from the host bridge itself.
         */
        d = pci_dev_msi_domain(dev);
        if (!d)
                d = dev_get_msi_domain(&dev->bus->dev);

        dev_set_msi_domain(&dev->dev, d);
}

void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
{
        int ret;

        pci_configure_device(dev);

        device_initialize(&dev->dev);
        dev->dev.release = pci_release_dev;

        set_dev_node(&dev->dev, pcibus_to_node(bus));
        dev->dev.dma_mask = &dev->dma_mask;
        dev->dev.dma_parms = &dev->dma_parms;
        dev->dev.coherent_dma_mask = 0xffffffffull;

        dma_set_max_seg_size(&dev->dev, 65536);
        dma_set_seg_boundary(&dev->dev, 0xffffffff);

        pcie_failed_link_retrain(dev);

        /* Fix up broken headers */
        pci_fixup_device(pci_fixup_header, dev);

        pci_reassigndev_resource_alignment(dev);

        dev->state_saved = false;

        pci_init_capabilities(dev);

        /*
         * Add the device to our list of discovered devices
         * and the bus list for fixup functions, etc.
         */
        down_write(&pci_bus_sem);
        list_add_tail(&dev->bus_list, &bus->devices);
        up_write(&pci_bus_sem);

        ret = pcibios_device_add(dev);
        WARN_ON(ret < 0);

        /* Set up MSI IRQ domain */
        pci_set_msi_domain(dev);

        /* Notifier could use PCI capabilities */
        dev->match_driver = false;
        ret = device_add(&dev->dev);
        WARN_ON(ret < 0);

        pci_npem_create(dev);
}

struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn)
{
        struct pci_dev *dev;

        dev = pci_get_slot(bus, devfn);
        if (dev) {
                pci_dev_put(dev);
                return dev;
        }

        dev = pci_scan_device(bus, devfn);
        if (!dev)
                return NULL;

        pci_device_add(dev, bus);

        return dev;
}
EXPORT_SYMBOL(pci_scan_single_device);

static int next_ari_fn(struct pci_bus *bus, struct pci_dev *dev, int fn)
{
        int pos;
        u16 cap = 0;
        unsigned int next_fn;

        if (!dev)
                return -ENODEV;

        pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
        if (!pos)
                return -ENODEV;

        pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap);
        next_fn = PCI_ARI_CAP_NFN(cap);
        if (next_fn <= fn)
                return -ENODEV; /* protect against malformed list */

        return next_fn;
}

static int next_fn(struct pci_bus *bus, struct pci_dev *dev, int fn)
{
        if (pci_ari_enabled(bus))
                return next_ari_fn(bus, dev, fn);

        if (fn >= 7)
                return -ENODEV;
        /* only multifunction devices may have more functions */
        if (dev && !dev->multifunction)
                return -ENODEV;

        return fn + 1;
}

static int only_one_child(struct pci_bus *bus)
{
        struct pci_dev *bridge = bus->self;

        /*
         * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so
         * we scan for all possible devices, not just Device 0.
         */
        if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
                return 0;

        /*
         * A PCIe Downstream Port normally leads to a Link with only Device
         * 0 on it (PCIe spec r3.1, sec 7.3.1).  As an optimization, scan
         * only for Device 0 in that situation.
         */
        if (bridge && pci_is_pcie(bridge) && pcie_downstream_port(bridge))
                return 1;

        return 0;
}

/**
 * pci_scan_slot - Scan a PCI slot on a bus for devices
 * @bus: PCI bus to scan
 * @devfn: slot number to scan (must have zero function)
 *
 * Scan a PCI slot on the specified PCI bus for devices, adding
 * discovered devices to the @bus->devices list.  New devices
 * will not have is_added set.
 *
 * Returns the number of new devices found.
 */
int pci_scan_slot(struct pci_bus *bus, int devfn)
{
        struct pci_dev *dev;
        int fn = 0, nr = 0;

        if (only_one_child(bus) && (devfn > 0))
                return 0; /* Already scanned the entire slot */

        do {
                dev = pci_scan_single_device(bus, devfn + fn);
                if (dev) {
                        if (!pci_dev_is_added(dev))
                                nr++;
                        if (fn > 0)
                                dev->multifunction = 1;
                } else if (fn == 0) {
                        /*
                         * Function 0 is required unless we are running on
                         * a hypervisor that passes through individual PCI
                         * functions.
                         */
                        if (!hypervisor_isolated_pci_functions())
                                break;
                }
                fn = next_fn(bus, dev, fn);
        } while (fn >= 0);

        /* Only one slot has PCIe device */
        if (bus->self && nr)
                pcie_aspm_init_link_state(bus->self);

        return nr;
}
EXPORT_SYMBOL(pci_scan_slot);

static int pcie_find_smpss(struct pci_dev *dev, void *data)
{
        u8 *smpss = data;

        if (!pci_is_pcie(dev))
                return 0;

        /*
         * We don't have a way to change MPS settings on devices that have
         * drivers attached.  A hot-added device might support only the minimum
         * MPS setting (MPS=128).  Therefore, if the fabric contains a bridge
         * where devices may be hot-added, we limit the fabric MPS to 128 so
         * hot-added devices will work correctly.
         *
         * However, if we hot-add a device to a slot directly below a Root
         * Port, it's impossible for there to be other existing devices below
         * the port.  We don't limit the MPS in this case because we can
         * reconfigure MPS on both the Root Port and the hot-added device,
         * and there are no other devices involved.
         *
         * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA.
         */
        if (dev->is_hotplug_bridge &&
            pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
                *smpss = 0;

        if (*smpss > dev->pcie_mpss)
                *smpss = dev->pcie_mpss;

        return 0;
}

static void pcie_write_mps(struct pci_dev *dev, int mps)
{
        int rc;

        if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
                mps = 128 << dev->pcie_mpss;

                if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT &&
                    dev->bus->self)

                        /*
                         * For "Performance", the assumption is made that
                         * downstream communication will never be larger than
                         * the MRRS.  So, the MPS only needs to be configured
                         * for the upstream communication.  This being the case,
                         * walk from the top down and set the MPS of the child
                         * to that of the parent bus.
                         *
                         * Configure the device MPS with the smaller of the
                         * device MPSS or the bridge MPS (which is assumed to be
                         * properly configured at this point to the largest
                         * allowable MPS based on its parent bus).
                         */
                        mps = min(mps, pcie_get_mps(dev->bus->self));
        }

        rc = pcie_set_mps(dev, mps);
        if (rc)
                pci_err(dev, "Failed attempting to set the MPS\n");
}

static void pcie_write_mrrs(struct pci_dev *dev)
{
        int rc, mrrs;

        /*
         * In the "safe" case, do not configure the MRRS.  There appear to be
         * issues with setting MRRS to 0 on a number of devices.
         */
        if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
                return;

        /*
         * For max performance, the MRRS must be set to the largest supported
         * value.  However, it cannot be configured larger than the MPS the
         * device or the bus can support.  This should already be properly
         * configured by a prior call to pcie_write_mps().
         */
        mrrs = pcie_get_mps(dev);

        /*
         * MRRS is a R/W register.  Invalid values can be written, but a
         * subsequent read will verify if the value is acceptable or not.
         * If the MRRS value provided is not acceptable (e.g., too large),
         * shrink the value until it is acceptable to the HW.
         */
        while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
                rc = pcie_set_readrq(dev, mrrs);
                if (!rc)
                        break;

                pci_warn(dev, "Failed attempting to set the MRRS\n");
                mrrs /= 2;
        }

        if (mrrs < 128)
                pci_err(dev, "MRRS was unable to be configured with a safe value.  If problems are experienced, try running with pci=pcie_bus_safe\n");
}

static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
{
        int mps, orig_mps;

        if (!pci_is_pcie(dev))
                return 0;

        if (pcie_bus_config == PCIE_BUS_TUNE_OFF ||
            pcie_bus_config == PCIE_BUS_DEFAULT)
                return 0;

        mps = 128 << *(u8 *)data;
        orig_mps = pcie_get_mps(dev);

        pcie_write_mps(dev, mps);
        pcie_write_mrrs(dev);

        pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n",
                 pcie_get_mps(dev), 128 << dev->pcie_mpss,
                 orig_mps, pcie_get_readrq(dev));

        return 0;
}

/*
 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down,
 * parents then children fashion.  If this changes, then this code will not
 * work as designed.
 */
void pcie_bus_configure_settings(struct pci_bus *bus)
{
        u8 smpss = 0;

        if (!bus->self)
                return;

        if (!pci_is_pcie(bus->self))
                return;

        /*
         * FIXME - Peer to peer DMA is possible, though the endpoint would need
         * to be aware of the MPS of the destination.  To work around this,
         * simply force the MPS of the entire system to the smallest possible.
         */
        if (pcie_bus_config == PCIE_BUS_PEER2PEER)
                smpss = 0;

        if (pcie_bus_config == PCIE_BUS_SAFE) {
                smpss = bus->self->pcie_mpss;

                pcie_find_smpss(bus->self, &smpss);
                pci_walk_bus(bus, pcie_find_smpss, &smpss);
        }

        pcie_bus_configure_set(bus->self, &smpss);
        pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
}
EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);

/*
 * Called after each bus is probed, but before its children are examined.  This
 * is marked as __weak because multiple architectures define it.
 */
void __weak pcibios_fixup_bus(struct pci_bus *bus)
{
       /* nothing to do, expected to be removed in the future */
}

/**
 * pci_scan_child_bus_extend() - Scan devices below a bus
 * @bus: Bus to scan for devices
 * @available_buses: Total number of buses available (%0 does not try to
 *                   extend beyond the minimal)
 *
 * Scans devices below @bus including subordinate buses. Returns new
 * subordinate number including all the found devices. Passing
 * @available_buses causes the remaining bus space to be distributed
 * equally between hotplug-capable bridges to allow future extension of the
 * hierarchy.
 */
static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
                                              unsigned int available_buses)
{
        unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
        unsigned int start = bus->busn_res.start;
        unsigned int devfn, cmax, max = start;
        struct pci_dev *dev;

        dev_dbg(&bus->dev, "scanning bus\n");

        /* Go find them, Rover! */
        for (devfn = 0; devfn < 256; devfn += 8)
                pci_scan_slot(bus, devfn);

        /* Reserve buses for SR-IOV capability */
        used_buses = pci_iov_bus_range(bus);
        max += used_buses;

        /*
         * After performing arch-dependent fixup of the bus, look behind
         * all PCI-to-PCI bridges on this bus.
         */
        if (!bus->is_added) {
                dev_dbg(&bus->dev, "fixups for bus\n");
                pcibios_fixup_bus(bus);
                bus->is_added = 1;
        }

        /*
         * Calculate how many hotplug bridges and normal bridges there
         * are on this bus. We will distribute the additional available
         * buses between hotplug bridges.
         */
        for_each_pci_bridge(dev, bus) {
                if (dev->is_hotplug_bridge)
                        hotplug_bridges++;
                else
                        normal_bridges++;
        }

        /*
         * Scan bridges that are already configured. We don't touch them
         * unless they are misconfigured (which will be done in the second
         * scan below).
         */
        for_each_pci_bridge(dev, bus) {
                cmax = max;
                max = pci_scan_bridge_extend(bus, dev, max, 0, 0);

                /*
                 * Reserve one bus for each bridge now to avoid extending
                 * hotplug bridges too much during the second scan below.
                 */
                used_buses++;
                if (max - cmax > 1)
                        used_buses += max - cmax - 1;
        }

        /* Scan bridges that need to be reconfigured */
        for_each_pci_bridge(dev, bus) {
                unsigned int buses = 0;

                if (!hotplug_bridges && normal_bridges == 1) {
                        /*
                         * There is only one bridge on the bus (upstream
                         * port) so it gets all available buses which it
                         * can then distribute to the possible hotplug
                         * bridges below.
                         */
                        buses = available_buses;
                } else if (dev->is_hotplug_bridge) {
                        /*
                         * Distribute the extra buses between hotplug
                         * bridges if any.
                         */
                        buses = available_buses / hotplug_bridges;
                        buses = min(buses, available_buses - used_buses + 1);
                }

                cmax = max;
                max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1);
                /* One bus is already accounted so don't add it again */
                if (max - cmax > 1)
                        used_buses += max - cmax - 1;
        }

        /*
         * Make sure a hotplug bridge has at least the minimum requested
         * number of buses but allow it to grow up to the maximum available
         * bus number if there is room.
         */
        if (bus->self && bus->self->is_hotplug_bridge) {
                used_buses = max_t(unsigned int, available_buses,
                                   pci_hotplug_bus_size - 1);
                if (max - start < used_buses) {
                        max = start + used_buses;

                        /* Do not allocate more buses than we have room left */
                        if (max > bus->busn_res.end)
                                max = bus->busn_res.end;

                        dev_dbg(&bus->dev, "%pR extended by %#02x\n",
                                &bus->busn_res, max - start);
                }
        }

        /*
         * We've scanned the bus and so we know all about what's on
         * the other side of any bridges that may be on this bus plus
         * any devices.
         *
         * Return how far we've got finding sub-buses.
         */
        dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
        return max;
}

/**
 * pci_scan_child_bus() - Scan devices below a bus
 * @bus: Bus to scan for devices
 *
 * Scans devices below @bus including subordinate buses. Returns new
 * subordinate number including all the found devices.
 */
unsigned int pci_scan_child_bus(struct pci_bus *bus)
{
        return pci_scan_child_bus_extend(bus, 0);
}
EXPORT_SYMBOL_GPL(pci_scan_child_bus);

/**
 * pcibios_root_bridge_prepare - Platform-specific host bridge setup
 * @bridge: Host bridge to set up
 *
 * Default empty implementation.  Replace with an architecture-specific setup
 * routine, if necessary.
 */
int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
{
        return 0;
}

void __weak pcibios_add_bus(struct pci_bus *bus)
{
}

void __weak pcibios_remove_bus(struct pci_bus *bus)
{
}

struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
                struct pci_ops *ops, void *sysdata, struct list_head *resources)
{
        int error;
        struct pci_host_bridge *bridge;

        bridge = pci_alloc_host_bridge(0);
        if (!bridge)
                return NULL;

        bridge->dev.parent = parent;

        list_splice_init(resources, &bridge->windows);
        bridge->sysdata = sysdata;
        bridge->busnr = bus;
        bridge->ops = ops;

        error = pci_register_host_bridge(bridge);
        if (error < 0)
                goto err_out;

        return bridge->bus;

err_out:
        put_device(&bridge->dev);
        return NULL;
}
EXPORT_SYMBOL_GPL(pci_create_root_bus);

int pci_host_probe(struct pci_host_bridge *bridge)
{
        struct pci_bus *bus, *child;
        int ret;

        pci_lock_rescan_remove();
        ret = pci_scan_root_bus_bridge(bridge);
        pci_unlock_rescan_remove();
        if (ret < 0) {
                dev_err(bridge->dev.parent, "Scanning root bridge failed");
                return ret;
        }

        bus = bridge->bus;

        /* If we must preserve the resource configuration, claim now */
        if (bridge->preserve_config)
                pci_bus_claim_resources(bus);

        /*
         * Assign whatever was left unassigned. If we didn't claim above,
         * this will reassign everything.
         */
        pci_assign_unassigned_root_bus_resources(bus);

        list_for_each_entry(child, &bus->children, node)
                pcie_bus_configure_settings(child);

        pci_lock_rescan_remove();
        pci_bus_add_devices(bus);
        pci_unlock_rescan_remove();

        /*
         * Ensure pm_runtime_enable() is called for the controller drivers
         * before calling pci_host_probe(). The PM framework expects that
         * if the parent device supports runtime PM, it will be enabled
         * before child runtime PM is enabled.
         */
        pm_runtime_set_active(&bridge->dev);
        pm_runtime_no_callbacks(&bridge->dev);
        devm_pm_runtime_enable(&bridge->dev);

        return 0;
}
EXPORT_SYMBOL_GPL(pci_host_probe);

int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
{
        struct resource *res = &b->busn_res;
        struct resource *parent_res, *conflict;

        res->start = bus;
        res->end = bus_max;
        res->flags = IORESOURCE_BUS;

        if (!pci_is_root_bus(b))
                parent_res = &b->parent->busn_res;
        else {
                parent_res = get_pci_domain_busn_res(pci_domain_nr(b));
                res->flags |= IORESOURCE_PCI_FIXED;
        }

        conflict = request_resource_conflict(parent_res, res);

        if (conflict)
                dev_info(&b->dev,
                           "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n",
                            res, pci_is_root_bus(b) ? "domain " : "",
                            parent_res, conflict->name, conflict);

        return conflict == NULL;
}

int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max)
{
        struct resource *res = &b->busn_res;
        struct resource old_res = *res;
        resource_size_t size;
        int ret;

        if (res->start > bus_max)
                return -EINVAL;

        size = bus_max - res->start + 1;
        ret = adjust_resource(res, res->start, size);
        dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n",
                        &old_res, ret ? "can not be" : "is", bus_max);

        if (!ret && !res->parent)
                pci_bus_insert_busn_res(b, res->start, res->end);

        return ret;
}

void pci_bus_release_busn_res(struct pci_bus *b)
{
        struct resource *res = &b->busn_res;
        int ret;

        if (!res->flags || !res->parent)
                return;

        ret = release_resource(res);
        dev_info(&b->dev, "busn_res: %pR %s released\n",
                        res, ret ? "can not be" : "is");
}

int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge)
{
        struct resource_entry *window;
        bool found = false;
        struct pci_bus *b;
        int max, bus, ret;

        if (!bridge)
                return -EINVAL;

        resource_list_for_each_entry(window, &bridge->windows)
                if (window->res->flags & IORESOURCE_BUS) {
                        bridge->busnr = window->res->start;
                        found = true;
                        break;
                }

        ret = pci_register_host_bridge(bridge);
        if (ret < 0)
                return ret;

        b = bridge->bus;
        bus = bridge->busnr;

        if (!found) {
                dev_info(&b->dev,
                 "No busn resource found for root bus, will use [bus %02x-ff]\n",
                        bus);
                pci_bus_insert_busn_res(b, bus, 255);
        }

        max = pci_scan_child_bus(b);

        if (!found)
                pci_bus_update_busn_res_end(b, max);

        return 0;
}
EXPORT_SYMBOL(pci_scan_root_bus_bridge);

struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
                struct pci_ops *ops, void *sysdata, struct list_head *resources)
{
        struct resource_entry *window;
        bool found = false;
        struct pci_bus *b;
        int max;

        resource_list_for_each_entry(window, resources)
                if (window->res->flags & IORESOURCE_BUS) {
                        found = true;
                        break;
                }

        b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
        if (!b)
                return NULL;

        if (!found) {
                dev_info(&b->dev,
                 "No busn resource found for root bus, will use [bus %02x-ff]\n",
                        bus);
                pci_bus_insert_busn_res(b, bus, 255);
        }

        max = pci_scan_child_bus(b);

        if (!found)
                pci_bus_update_busn_res_end(b, max);

        return b;
}
EXPORT_SYMBOL(pci_scan_root_bus);

struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops,
                                        void *sysdata)
{
        LIST_HEAD(resources);
        struct pci_bus *b;

        pci_add_resource(&resources, &ioport_resource);
        pci_add_resource(&resources, &iomem_resource);
        pci_add_resource(&resources, &busn_resource);
        b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
        if (b) {
                pci_scan_child_bus(b);
        } else {
                pci_free_resource_list(&resources);
        }
        return b;
}
EXPORT_SYMBOL(pci_scan_bus);

/**
 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices
 * @bridge: PCI bridge for the bus to scan
 *
 * Scan a PCI bus and child buses for new devices, add them,
 * and enable them, resizing bridge mmio/io resource if necessary
 * and possible.  The caller must ensure the child devices are already
 * removed for resizing to occur.
 *
 * Returns the max number of subordinate bus discovered.
 */
unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge)
{
        unsigned int max;
        struct pci_bus *bus = bridge->subordinate;

        max = pci_scan_child_bus(bus);

        pci_assign_unassigned_bridge_resources(bridge);

        pci_bus_add_devices(bus);

        return max;
}

/**
 * pci_rescan_bus - Scan a PCI bus for devices
 * @bus: PCI bus to scan
 *
 * Scan a PCI bus and child buses for new devices, add them,
 * and enable them.
 *
 * Returns the max number of subordinate bus discovered.
 */
unsigned int pci_rescan_bus(struct pci_bus *bus)
{
        unsigned int max;

        max = pci_scan_child_bus(bus);
        pci_assign_unassigned_bus_resources(bus);
        pci_bus_add_devices(bus);

        return max;
}
EXPORT_SYMBOL_GPL(pci_rescan_bus);

/*
 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal
 * routines should always be executed under this mutex.
 */
static DEFINE_MUTEX(pci_rescan_remove_lock);

void pci_lock_rescan_remove(void)
{
        mutex_lock(&pci_rescan_remove_lock);
}
EXPORT_SYMBOL_GPL(pci_lock_rescan_remove);

void pci_unlock_rescan_remove(void)
{
        mutex_unlock(&pci_rescan_remove_lock);
}
EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove);

static int __init pci_sort_bf_cmp(const struct device *d_a,
                                  const struct device *d_b)
{
        const struct pci_dev *a = to_pci_dev(d_a);
        const struct pci_dev *b = to_pci_dev(d_b);

        if      (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
        else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return  1;

        if      (a->bus->number < b->bus->number) return -1;
        else if (a->bus->number > b->bus->number) return  1;

        if      (a->devfn < b->devfn) return -1;
        else if (a->devfn > b->devfn) return  1;

        return 0;
}

void __init pci_sort_breadthfirst(void)
{
        bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
}

int pci_hp_add_bridge(struct pci_dev *dev)
{
        struct pci_bus *parent = dev->bus;
        int busnr, start = parent->busn_res.start;
        unsigned int available_buses = 0;
        int end = parent->busn_res.end;

        for (busnr = start; busnr <= end; busnr++) {
                if (!pci_find_bus(pci_domain_nr(parent), busnr))
                        break;
        }
        if (busnr-- > end) {
                pci_err(dev, "No bus number available for hot-added bridge\n");
                return -1;
        }

        /* Scan bridges that are already configured */
        busnr = pci_scan_bridge(parent, dev, busnr, 0);

        /*
         * Distribute the available bus numbers between hotplug-capable
         * bridges to make extending the chain later possible.
         */
        available_buses = end - busnr;

        /* Scan bridges that need to be reconfigured */
        pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1);

        if (!dev->subordinate)
                return -1;

        return 0;
}
EXPORT_SYMBOL_GPL(pci_hp_add_bridge);