drivers/phy/marvell/phy-mmp3-usb.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
   4  * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
   5  */
   6
   7 #include <linux/delay.h>
   8 #include <linux/io.h>
   9 #include <linux/mod_devicetable.h>
  10 #include <linux/module.h>
  11 #include <linux/phy/phy.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/soc/mmp/cputype.h>
  14
  15 #define USB2_PLL_REG0           0x4
  16 #define USB2_PLL_REG1           0x8
  17 #define USB2_TX_REG0            0x10
  18 #define USB2_TX_REG1            0x14
  19 #define USB2_TX_REG2            0x18
  20 #define USB2_RX_REG0            0x20
  21 #define USB2_RX_REG1            0x24
  22 #define USB2_RX_REG2            0x28
  23 #define USB2_ANA_REG0           0x30
  24 #define USB2_ANA_REG1           0x34
  25 #define USB2_ANA_REG2           0x38
  26 #define USB2_DIG_REG0           0x3C
  27 #define USB2_DIG_REG1           0x40
  28 #define USB2_DIG_REG2           0x44
  29 #define USB2_DIG_REG3           0x48
  30 #define USB2_TEST_REG0          0x4C
  31 #define USB2_TEST_REG1          0x50
  32 #define USB2_TEST_REG2          0x54
  33 #define USB2_CHARGER_REG0       0x58
  34 #define USB2_OTG_REG0           0x5C
  35 #define USB2_PHY_MON0           0x60
  36 #define USB2_RESETVE_REG0       0x64
  37 #define USB2_ICID_REG0          0x78
  38 #define USB2_ICID_REG1          0x7C
  39
  40 /* USB2_PLL_REG0 */
  41
  42 /* This is for Ax stepping */
  43 #define USB2_PLL_FBDIV_SHIFT_MMP3               0
  44 #define USB2_PLL_FBDIV_MASK_MMP3                (0xFF << 0)
  45
  46 #define USB2_PLL_REFDIV_SHIFT_MMP3              8
  47 #define USB2_PLL_REFDIV_MASK_MMP3               (0xF << 8)
  48
  49 #define USB2_PLL_VDD12_SHIFT_MMP3               12
  50 #define USB2_PLL_VDD18_SHIFT_MMP3               14
  51
  52 /* This is for B0 stepping */
  53 #define USB2_PLL_FBDIV_SHIFT_MMP3_B0            0
  54 #define USB2_PLL_REFDIV_SHIFT_MMP3_B0           9
  55 #define USB2_PLL_VDD18_SHIFT_MMP3_B0            14
  56 #define USB2_PLL_FBDIV_MASK_MMP3_B0             0x01FF
  57 #define USB2_PLL_REFDIV_MASK_MMP3_B0            0x3E00
  58
  59 #define USB2_PLL_CAL12_SHIFT_MMP3               0
  60 #define USB2_PLL_CALI12_MASK_MMP3               (0x3 << 0)
  61
  62 #define USB2_PLL_VCOCAL_START_SHIFT_MMP3        2
  63
  64 #define USB2_PLL_KVCO_SHIFT_MMP3                4
  65 #define USB2_PLL_KVCO_MASK_MMP3                 (0x7<<4)
  66
  67 #define USB2_PLL_ICP_SHIFT_MMP3                 8
  68 #define USB2_PLL_ICP_MASK_MMP3                  (0x7<<8)
  69
  70 #define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3         12
  71
  72 #define USB2_PLL_PU_PLL_SHIFT_MMP3              13
  73 #define USB2_PLL_PU_PLL_MASK                    (0x1 << 13)
  74
  75 #define USB2_PLL_READY_MASK_MMP3                (0x1 << 15)
  76
  77 /* USB2_TX_REG0 */
  78 #define USB2_TX_IMPCAL_VTH_SHIFT_MMP3           8
  79 #define USB2_TX_IMPCAL_VTH_MASK_MMP3            (0x7 << 8)
  80
  81 #define USB2_TX_RCAL_START_SHIFT_MMP3           13
  82
  83 /* USB2_TX_REG1 */
  84 #define USB2_TX_CK60_PHSEL_SHIFT_MMP3           0
  85 #define USB2_TX_CK60_PHSEL_MASK_MMP3            (0xf << 0)
  86
  87 #define USB2_TX_AMP_SHIFT_MMP3                  4
  88 #define USB2_TX_AMP_MASK_MMP3                   (0x7 << 4)
  89
  90 #define USB2_TX_VDD12_SHIFT_MMP3                8
  91 #define USB2_TX_VDD12_MASK_MMP3                 (0x3 << 8)
  92
  93 /* USB2_TX_REG2 */
  94 #define USB2_TX_DRV_SLEWRATE_SHIFT              10
  95
  96 /* USB2_RX_REG0 */
  97 #define USB2_RX_SQ_THRESH_SHIFT_MMP3            4
  98 #define USB2_RX_SQ_THRESH_MASK_MMP3             (0xf << 4)
  99
 100 #define USB2_RX_SQ_LENGTH_SHIFT_MMP3            10
 101 #define USB2_RX_SQ_LENGTH_MASK_MMP3             (0x3 << 10)
 102
 103 /* USB2_ANA_REG1*/
 104 #define USB2_ANA_PU_ANA_SHIFT_MMP3              14
 105
 106 /* USB2_OTG_REG0 */
 107 #define USB2_OTG_PU_OTG_SHIFT_MMP3              3
 108
 109 struct mmp3_usb_phy {
 110         struct phy *phy;
 111         void __iomem *base;
 112 };
 113
 114 static unsigned int u2o_get(void __iomem *base, unsigned int offset)
 115 {
 116         return readl_relaxed(base + offset);
 117 }
 118
 119 static void u2o_set(void __iomem *base, unsigned int offset,
 120                 unsigned int value)
 121 {
 122         u32 reg;
 123
 124         reg = readl_relaxed(base + offset);
 125         reg |= value;
 126         writel_relaxed(reg, base + offset);
 127         readl_relaxed(base + offset);
 128 }
 129
 130 static void u2o_clear(void __iomem *base, unsigned int offset,
 131                 unsigned int value)
 132 {
 133         u32 reg;
 134
 135         reg = readl_relaxed(base + offset);
 136         reg &= ~value;
 137         writel_relaxed(reg, base + offset);
 138         readl_relaxed(base + offset);
 139 }
 140
 141 static int mmp3_usb_phy_init(struct phy *phy)
 142 {
 143         struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
 144         void __iomem *base = mmp3_usb_phy->base;
 145
 146         if (cpu_is_mmp3_a0()) {
 147                 u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3
 148                         | USB2_PLL_REFDIV_MASK_MMP3));
 149                 u2o_set(base, USB2_PLL_REG0,
 150                         0xd << USB2_PLL_REFDIV_SHIFT_MMP3
 151                         | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3);
 152         } else if (cpu_is_mmp3_b0()) {
 153                 u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0
 154                         | USB2_PLL_FBDIV_MASK_MMP3_B0);
 155                 u2o_set(base, USB2_PLL_REG0,
 156                         0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0
 157                         | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0);
 158         } else {
 159                 dev_err(&phy->dev, "unsupported silicon revision\n");
 160                 return -ENODEV;
 161         }
 162
 163         u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK
 164                 | USB2_PLL_ICP_MASK_MMP3
 165                 | USB2_PLL_KVCO_MASK_MMP3
 166                 | USB2_PLL_CALI12_MASK_MMP3);
 167         u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3
 168                 | 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3
 169                 | 3 << USB2_PLL_ICP_SHIFT_MMP3
 170                 | 3 << USB2_PLL_KVCO_SHIFT_MMP3
 171                 | 3 << USB2_PLL_CAL12_SHIFT_MMP3);
 172
 173         u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3);
 174         u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3);
 175
 176         u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3
 177                 | USB2_TX_AMP_MASK_MMP3
 178                 | USB2_TX_CK60_PHSEL_MASK_MMP3);
 179         u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3
 180                 | 4 << USB2_TX_AMP_SHIFT_MMP3
 181                 | 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3);
 182
 183         u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT);
 184         u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT);
 185
 186         u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3);
 187         u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3);
 188
 189         u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3);
 190
 191         u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3);
 192
 193         return 0;
 194 }
 195
 196 static int mmp3_usb_phy_calibrate(struct phy *phy)
 197 {
 198         struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
 199         void __iomem *base = mmp3_usb_phy->base;
 200         int loops;
 201
 202         /*
 203          * PLL VCO and TX Impedance Calibration Timing:
 204          *
 205          *                _____________________________________
 206          * PU  __________|
 207          *                        _____________________________
 208          * VCOCAL START _________|
 209          *                                 ___
 210          * REG_RCAL_START ________________|   |________|_______
 211          *               | 200us | 400us  | 40| 400us  | USB PHY READY
 212          */
 213
 214         udelay(200);
 215         u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3);
 216         udelay(400);
 217         u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
 218         udelay(40);
 219         u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
 220         udelay(400);
 221
 222         loops = 0;
 223         while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) {
 224                 mdelay(1);
 225                 loops++;
 226                 if (loops > 100) {
 227                         dev_err(&phy->dev, "PLL_READY not set after 100mS.\n");
 228                         return -ETIMEDOUT;
 229                 }
 230         }
 231
 232         return 0;
 233 }
 234
 235 static const struct phy_ops mmp3_usb_phy_ops = {
 236         .init           = mmp3_usb_phy_init,
 237         .calibrate      = mmp3_usb_phy_calibrate,
 238         .owner          = THIS_MODULE,
 239 };
 240
 241 static const struct of_device_id mmp3_usb_phy_of_match[] = {
 242         { .compatible = "marvell,mmp3-usb-phy", },
 243         { },
 244 };
 245 MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
 246
 247 static int mmp3_usb_phy_probe(struct platform_device *pdev)
 248 {
 249         struct device *dev = &pdev->dev;
 250         struct mmp3_usb_phy *mmp3_usb_phy;
 251         struct phy_provider *provider;
 252
 253         mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL);
 254         if (!mmp3_usb_phy)
 255                 return -ENOMEM;
 256
 257         mmp3_usb_phy->base = devm_platform_ioremap_resource(pdev, 0);
 258         if (IS_ERR(mmp3_usb_phy->base)) {
 259                 dev_err(dev, "failed to remap PHY regs\n");
 260                 return PTR_ERR(mmp3_usb_phy->base);
 261         }
 262
 263         mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops);
 264         if (IS_ERR(mmp3_usb_phy->phy)) {
 265                 dev_err(dev, "failed to create PHY\n");
 266                 return PTR_ERR(mmp3_usb_phy->phy);
 267         }
 268
 269         phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy);
 270         provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 271         if (IS_ERR(provider)) {
 272                 dev_err(dev, "failed to register PHY provider\n");
 273                 return PTR_ERR(provider);
 274         }
 275
 276         return 0;
 277 }
 278
 279 static struct platform_driver mmp3_usb_phy_driver = {
 280         .probe          = mmp3_usb_phy_probe,
 281         .driver         = {
 282                 .name   = "mmp3-usb-phy",
 283                 .of_match_table = mmp3_usb_phy_of_match,
 284         },
 285 };
 286 module_platform_driver(mmp3_usb_phy_driver);
 287
 288 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
 289 MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver");
 290 MODULE_LICENSE("GPL v2");