drm/modes: Fix drm_mode_vrefres() docs
[drm/drm-misc.git] / drivers / scsi / arm / acornscsi.h
blob376c76bc2aca5dcd66d71799239dde4ef7ef3502
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * linux/drivers/acorn/scsi/acornscsi.h
5 * Copyright (C) 1997 Russell King
7 * Acorn SCSI driver
8 */
9 #ifndef ACORNSCSI_H
10 #define ACORNSCSI_H
12 /* SBIC registers */
13 #define SBIC_OWNID 0
14 #define OWNID_FS1 (1<<7)
15 #define OWNID_FS2 (1<<6)
16 #define OWNID_EHP (1<<4)
17 #define OWNID_EAF (1<<3)
19 #define SBIC_CTRL 1
20 #define CTRL_DMAMODE (1<<7)
21 #define CTRL_DMADBAMODE (1<<6)
22 #define CTRL_DMABURST (1<<5)
23 #define CTRL_DMAPOLLED 0
24 #define CTRL_HHP (1<<4)
25 #define CTRL_EDI (1<<3)
26 #define CTRL_IDI (1<<2)
27 #define CTRL_HA (1<<1)
28 #define CTRL_HSP (1<<0)
30 #define SBIC_TIMEOUT 2
31 #define SBIC_TOTSECTS 3
32 #define SBIC_TOTHEADS 4
33 #define SBIC_TOTCYLH 5
34 #define SBIC_TOTCYLL 6
35 #define SBIC_LOGADDRH 7
36 #define SBIC_LOGADDRM2 8
37 #define SBIC_LOGADDRM1 9
38 #define SBIC_LOGADDRL 10
39 #define SBIC_SECTORNUM 11
40 #define SBIC_HEADNUM 12
41 #define SBIC_CYLH 13
42 #define SBIC_CYLL 14
43 #define SBIC_TARGETLUN 15
44 #define TARGETLUN_TLV (1<<7)
45 #define TARGETLUN_DOK (1<<6)
47 #define SBIC_CMNDPHASE 16
48 #define SBIC_SYNCHTRANSFER 17
49 #define SYNCHTRANSFER_OF0 0x00
50 #define SYNCHTRANSFER_OF1 0x01
51 #define SYNCHTRANSFER_OF2 0x02
52 #define SYNCHTRANSFER_OF3 0x03
53 #define SYNCHTRANSFER_OF4 0x04
54 #define SYNCHTRANSFER_OF5 0x05
55 #define SYNCHTRANSFER_OF6 0x06
56 #define SYNCHTRANSFER_OF7 0x07
57 #define SYNCHTRANSFER_OF8 0x08
58 #define SYNCHTRANSFER_OF9 0x09
59 #define SYNCHTRANSFER_OF10 0x0A
60 #define SYNCHTRANSFER_OF11 0x0B
61 #define SYNCHTRANSFER_OF12 0x0C
62 #define SYNCHTRANSFER_8DBA 0x00
63 #define SYNCHTRANSFER_2DBA 0x20
64 #define SYNCHTRANSFER_3DBA 0x30
65 #define SYNCHTRANSFER_4DBA 0x40
66 #define SYNCHTRANSFER_5DBA 0x50
67 #define SYNCHTRANSFER_6DBA 0x60
68 #define SYNCHTRANSFER_7DBA 0x70
70 #define SBIC_TRANSCNTH 18
71 #define SBIC_TRANSCNTM 19
72 #define SBIC_TRANSCNTL 20
73 #define SBIC_DESTID 21
74 #define DESTID_SCC (1<<7)
75 #define DESTID_DPD (1<<6)
77 #define SBIC_SOURCEID 22
78 #define SOURCEID_ER (1<<7)
79 #define SOURCEID_ES (1<<6)
80 #define SOURCEID_DSP (1<<5)
81 #define SOURCEID_SIV (1<<4)
83 #define SBIC_SSR 23
84 #define SBIC_CMND 24
85 #define CMND_RESET 0x00
86 #define CMND_ABORT 0x01
87 #define CMND_ASSERTATN 0x02
88 #define CMND_NEGATEACK 0x03
89 #define CMND_DISCONNECT 0x04
90 #define CMND_RESELECT 0x05
91 #define CMND_SELWITHATN 0x06
92 #define CMND_SELECT 0x07
93 #define CMND_SELECTATNTRANSFER 0x08
94 #define CMND_SELECTTRANSFER 0x09
95 #define CMND_RESELECTRXDATA 0x0A
96 #define CMND_RESELECTTXDATA 0x0B
97 #define CMND_WAITFORSELRECV 0x0C
98 #define CMND_SENDSTATCMD 0x0D
99 #define CMND_SENDDISCONNECT 0x0E
100 #define CMND_SETIDI 0x0F
101 #define CMND_RECEIVECMD 0x10
102 #define CMND_RECEIVEDTA 0x11
103 #define CMND_RECEIVEMSG 0x12
104 #define CMND_RECEIVEUSP 0x13
105 #define CMND_SENDCMD 0x14
106 #define CMND_SENDDATA 0x15
107 #define CMND_SENDMSG 0x16
108 #define CMND_SENDUSP 0x17
109 #define CMND_TRANSLATEADDR 0x18
110 #define CMND_XFERINFO 0x20
111 #define CMND_SBT (1<<7)
113 #define SBIC_DATA 25
114 #define SBIC_ASR 26
115 #define ASR_INT (1<<7)
116 #define ASR_LCI (1<<6)
117 #define ASR_BSY (1<<5)
118 #define ASR_CIP (1<<4)
119 #define ASR_PE (1<<1)
120 #define ASR_DBR (1<<0)
122 /* DMAC registers */
123 #define DMAC_INIT 0x00
124 #define INIT_8BIT (1)
126 #define DMAC_CHANNEL 0x80
127 #define CHANNEL_0 0x00
128 #define CHANNEL_1 0x01
129 #define CHANNEL_2 0x02
130 #define CHANNEL_3 0x03
132 #define DMAC_TXCNTLO 0x01
133 #define DMAC_TXCNTHI 0x81
134 #define DMAC_TXADRLO 0x02
135 #define DMAC_TXADRMD 0x82
136 #define DMAC_TXADRHI 0x03
138 #define DMAC_DEVCON0 0x04
139 #define DEVCON0_AKL (1<<7)
140 #define DEVCON0_RQL (1<<6)
141 #define DEVCON0_EXW (1<<5)
142 #define DEVCON0_ROT (1<<4)
143 #define DEVCON0_CMP (1<<3)
144 #define DEVCON0_DDMA (1<<2)
145 #define DEVCON0_AHLD (1<<1)
146 #define DEVCON0_MTM (1<<0)
148 #define DMAC_DEVCON1 0x84
149 #define DEVCON1_WEV (1<<1)
150 #define DEVCON1_BHLD (1<<0)
152 #define DMAC_MODECON 0x05
153 #define MODECON_WOED 0x01
154 #define MODECON_VERIFY 0x00
155 #define MODECON_READ 0x04
156 #define MODECON_WRITE 0x08
157 #define MODECON_AUTOINIT 0x10
158 #define MODECON_ADDRDIR 0x20
159 #define MODECON_DEMAND 0x00
160 #define MODECON_SINGLE 0x40
161 #define MODECON_BLOCK 0x80
162 #define MODECON_CASCADE 0xC0
164 #define DMAC_STATUS 0x85
165 #define STATUS_TC0 (1<<0)
166 #define STATUS_RQ0 (1<<4)
168 #define DMAC_TEMPLO 0x06
169 #define DMAC_TEMPHI 0x86
170 #define DMAC_REQREG 0x07
171 #define DMAC_MASKREG 0x87
172 #define MASKREG_M0 0x01
173 #define MASKREG_M1 0x02
174 #define MASKREG_M2 0x04
175 #define MASKREG_M3 0x08
177 /* miscellaneous internal variables */
179 #define MASK_ON (MASKREG_M3|MASKREG_M2|MASKREG_M1|MASKREG_M0)
180 #define MASK_OFF (MASKREG_M3|MASKREG_M2|MASKREG_M1)
183 * SCSI driver phases
185 typedef enum {
186 PHASE_IDLE, /* we're not planning on doing anything */
187 PHASE_CONNECTING, /* connecting to a target */
188 PHASE_CONNECTED, /* connected to a target */
189 PHASE_MSGOUT, /* message out to device */
190 PHASE_RECONNECTED, /* reconnected */
191 PHASE_COMMANDPAUSED, /* command partly sent */
192 PHASE_COMMAND, /* command all sent */
193 PHASE_DATAOUT, /* data out to device */
194 PHASE_DATAIN, /* data in from device */
195 PHASE_STATUSIN, /* status in from device */
196 PHASE_MSGIN, /* message in from device */
197 PHASE_DONE, /* finished */
198 PHASE_ABORTED, /* aborted */
199 PHASE_DISCONNECT, /* disconnecting */
200 } phase_t;
203 * After interrupt, what to do now
205 typedef enum {
206 INTR_IDLE, /* not expecting another IRQ */
207 INTR_NEXT_COMMAND, /* start next command */
208 INTR_PROCESSING, /* interrupt routine still processing */
209 } intr_ret_t;
212 * DMA direction
214 typedef enum {
215 DMA_OUT, /* DMA from memory to chip */
216 DMA_IN /* DMA from chip to memory */
217 } dmadir_t;
220 * Synchronous transfer state
222 typedef enum { /* Synchronous transfer state */
223 SYNC_ASYNCHRONOUS, /* don't negotiate synchronous transfers*/
224 SYNC_NEGOCIATE, /* start negotiation */
225 SYNC_SENT_REQUEST, /* sent SDTR message */
226 SYNC_COMPLETED, /* received SDTR reply */
227 } syncxfer_t;
230 * Command type
232 typedef enum { /* command type */
233 CMD_READ, /* READ_6, READ_10, READ_12 */
234 CMD_WRITE, /* WRITE_6, WRITE_10, WRITE_12 */
235 CMD_MISC, /* Others */
236 } cmdtype_t;
239 * Data phase direction
241 typedef enum { /* Data direction */
242 DATADIR_IN, /* Data in phase expected */
243 DATADIR_OUT /* Data out phase expected */
244 } datadir_t;
246 #include "queue.h"
247 #include "msgqueue.h"
249 #define STATUS_BUFFER_SIZE 32
251 * This is used to dump the previous states of the SBIC
253 struct status_entry {
254 unsigned long when;
255 unsigned char ssr;
256 unsigned char ph;
257 unsigned char irq;
258 unsigned char unused;
261 #define ADD_STATUS(_q,_ssr,_ph,_irq) \
262 ({ \
263 host->status[(_q)][host->status_ptr[(_q)]].when = jiffies; \
264 host->status[(_q)][host->status_ptr[(_q)]].ssr = (_ssr); \
265 host->status[(_q)][host->status_ptr[(_q)]].ph = (_ph); \
266 host->status[(_q)][host->status_ptr[(_q)]].irq = (_irq); \
267 host->status_ptr[(_q)] = (host->status_ptr[(_q)] + 1) & (STATUS_BUFFER_SIZE - 1); \
271 * AcornSCSI host specific data
273 typedef struct acornscsi_hostdata {
274 /* miscellaneous */
275 struct Scsi_Host *host; /* host */
276 struct scsi_cmnd *SCpnt; /* currently processing command */
277 struct scsi_cmnd *origSCpnt; /* original connecting command */
278 void __iomem *base; /* memc base address */
279 void __iomem *fast; /* fast ioc base address */
281 /* driver information */
282 struct {
283 unsigned int irq; /* interrupt */
284 phase_t phase; /* current phase */
286 struct {
287 unsigned char target; /* reconnected target */
288 unsigned char lun; /* reconnected lun */
289 unsigned char tag; /* reconnected tag */
290 } reconnected;
292 struct scsi_pointer SCp; /* current commands data pointer */
294 MsgQueue_t msgs;
296 unsigned short last_message; /* last message to be sent */
297 unsigned char disconnectable:1; /* this command can be disconnected */
298 } scsi;
300 /* statistics information */
301 struct {
302 unsigned int queues;
303 unsigned int removes;
304 unsigned int fins;
305 unsigned int reads;
306 unsigned int writes;
307 unsigned int miscs;
308 unsigned int disconnects;
309 unsigned int aborts;
310 unsigned int resets;
311 } stats;
313 /* queue handling */
314 struct {
315 Queue_t issue; /* issue queue */
316 Queue_t disconnected; /* disconnected command queue */
317 } queues;
319 /* per-device info */
320 struct {
321 unsigned char sync_xfer; /* synchronous transfer (SBIC value) */
322 syncxfer_t sync_state; /* sync xfer negotiation state */
323 unsigned char disconnect_ok:1; /* device can disconnect */
324 } device[8];
325 unsigned long busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy */
327 /* DMA info */
328 struct {
329 unsigned int free_addr; /* next free address */
330 unsigned int start_addr; /* start address of current transfer */
331 dmadir_t direction; /* dma direction */
332 unsigned int transferred; /* number of bytes transferred */
333 unsigned int xfer_start; /* scheduled DMA transfer start */
334 unsigned int xfer_length; /* scheduled DMA transfer length */
335 char *xfer_ptr; /* pointer to area */
336 unsigned char xfer_required:1; /* set if we need to transfer something */
337 unsigned char xfer_setup:1; /* set if DMA is setup */
338 unsigned char xfer_done:1; /* set if DMA reached end of BH list */
339 } dma;
341 /* card info */
342 struct {
343 unsigned char page_reg; /* current setting of page reg */
344 } card;
346 unsigned char status_ptr[9];
347 struct status_entry status[9][STATUS_BUFFER_SIZE];
348 } AS_Host;
350 #endif /* ACORNSCSI_H */