?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
drm/rockchip: Don't change hdmi reference clock rate
[drm/drm-misc.git] / drivers / tty / serial / icom.c
blob29e42831df39c02501d682e8f3e7e429b1080268
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * icom.c
4 *
5 * Copyright (C) 2001 IBM Corporation. All rights reserved.
6 *
7 * Serial device driver.
8 *
9 * Based on code from serial.c
10 */
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/errno.h>
14 #include <linux/signal.h>
15 #include <linux/timer.h>
16 #include <linux/interrupt.h>
17 #include <linux/tty.h>
18 #include <linux/termios.h>
19 #include <linux/fs.h>
20 #include <linux/tty_flip.h>
21 #include <linux/serial.h>
22 #include <linux/serial_core.h>
23 #include <linux/serial_reg.h>
24 #include <linux/major.h>
25 #include <linux/string.h>
26 #include <linux/fcntl.h>
27 #include <linux/ptrace.h>
28 #include <linux/ioport.h>
29 #include <linux/mm.h>
30 #include <linux/slab.h>
31 #include <linux/init.h>
32 #include <linux/delay.h>
33 #include <linux/pci.h>
34 #include <linux/vmalloc.h>
35 #include <linux/smp.h>
36 #include <linux/spinlock.h>
37 #include <linux/kref.h>
38 #include <linux/firmware.h>
39 #include <linux/bitops.h>
40
41 #include <linux/io.h>
42 #include <asm/irq.h>
43 #include <linux/uaccess.h>
44
45 /*#define ICOM_TRACE enable port trace capabilities */
46
47 #define ICOM_DRIVER_NAME "icom"
48 #define NR_PORTS 128
49
50 static const unsigned int icom_acfg_baud[] = {
51 300,
52 600,
53 900,
54 1200,
55 1800,
56 2400,
57 3600,
58 4800,
59 7200,
60 9600,
61 14400,
62 19200,
63 28800,
64 38400,
65 57600,
66 76800,
67 115200,
68 153600,
69 230400,
70 307200,
71 460800,
72 };
73 #define BAUD_TABLE_LIMIT (ARRAY_SIZE(icom_acfg_baud) - 1)
74
75 struct icom_regs {
76 u32 control; /* Adapter Control Register */
77 u32 interrupt; /* Adapter Interrupt Register */
78 u32 int_mask; /* Adapter Interrupt Mask Reg */
79 u32 int_pri; /* Adapter Interrupt Priority r */
80 u32 int_reg_b; /* Adapter non-masked Interrupt */
81 u32 resvd01;
82 u32 resvd02;
83 u32 resvd03;
84 u32 control_2; /* Adapter Control Register 2 */
85 u32 interrupt_2; /* Adapter Interrupt Register 2 */
86 u32 int_mask_2; /* Adapter Interrupt Mask 2 */
87 u32 int_pri_2; /* Adapter Interrupt Prior 2 */
88 u32 int_reg_2b; /* Adapter non-masked 2 */
89 };
90
91 struct func_dram {
92 u32 reserved[108]; /* 0-1B0 reserved by personality code */
93 u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */
94 u8 RcvStnAddr; /* 1B4 Receive Station Addr */
95 u8 IdleState; /* 1B5 Idle State */
96 u8 IdleMonitor; /* 1B6 Idle Monitor */
97 u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */
98 u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */
99 u8 StartXmitCmd; /* 1BC Start Xmit Command */
100 u8 HDLCConfigReg; /* 1BD Reserved */
101 u8 CauseCode; /* 1BE Cause code for fatal error */
102 u8 xchar; /* 1BF High priority send */
103 u32 reserved3; /* 1C0-1C3 Reserved */
104 u8 PrevCmdReg; /* 1C4 Reserved */
105 u8 CmdReg; /* 1C5 Command Register */
106 u8 async_config2; /* 1C6 Async Config Byte 2 */
107 u8 async_config3; /* 1C7 Async Config Byte 3 */
108 u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */
109 u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */
110 u8 misc_flags; /* 1DD misc flags */
111 #define V2_HARDWARE 0x40
112 #define ICOM_HDW_ACTIVE 0x01
113 u8 call_length; /* 1DE Phone #/CFI buff ln */
114 u8 call_length2; /* 1DF Upper byte (unused) */
115 u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */
116 u16 timer_value; /* 1E4-1E5 general timer value */
117 u8 timer_command; /* 1E6 general timer cmd */
118 u8 dce_command; /* 1E7 dce command reg */
119 u8 dce_cmd_status; /* 1E8 dce command stat */
120 u8 x21_r1_ioff; /* 1E9 dce ready counter */
121 u8 x21_r0_ioff; /* 1EA dce not ready ctr */
122 u8 x21_ralt_ioff; /* 1EB dce CNR counter */
123 u8 x21_r1_ion; /* 1EC dce ready I on ctr */
124 u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */
125 u8 ier; /* 1EE Interrupt Enable */
126 u8 isr; /* 1EF Input Signal Reg */
127 u8 osr; /* 1F0 Output Signal Reg */
128 u8 reset; /* 1F1 Reset/Reload Reg */
129 u8 disable; /* 1F2 Disable Reg */
130 u8 sync; /* 1F3 Sync Reg */
131 u8 error_stat; /* 1F4 Error Status */
132 u8 cable_id; /* 1F5 Cable ID */
133 u8 cs_length; /* 1F6 CS Load Length */
134 u8 mac_length; /* 1F7 Mac Load Length */
135 u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */
136 u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */
137 };
138
139 /*
140 * adapter defines and structures
141 */
142 #define ICOM_CONTROL_START_A 0x00000008
143 #define ICOM_CONTROL_STOP_A 0x00000004
144 #define ICOM_CONTROL_START_B 0x00000002
145 #define ICOM_CONTROL_STOP_B 0x00000001
146 #define ICOM_CONTROL_START_C 0x00000008
147 #define ICOM_CONTROL_STOP_C 0x00000004
148 #define ICOM_CONTROL_START_D 0x00000002
149 #define ICOM_CONTROL_STOP_D 0x00000001
150 #define ICOM_IRAM_OFFSET 0x1000
151 #define ICOM_IRAM_SIZE 0x0C00
152 #define ICOM_DCE_IRAM_OFFSET 0x0A00
153 #define ICOM_CABLE_ID_VALID 0x01
154 #define ICOM_CABLE_ID_MASK 0xF0
155 #define ICOM_DISABLE 0x80
156 #define CMD_XMIT_RCV_ENABLE 0xC0
157 #define CMD_XMIT_ENABLE 0x40
158 #define CMD_RCV_DISABLE 0x00
159 #define CMD_RCV_ENABLE 0x80
160 #define CMD_RESTART 0x01
161 #define CMD_HOLD_XMIT 0x02
162 #define CMD_SND_BREAK 0x04
163 #define RS232_CABLE 0x06
164 #define V24_CABLE 0x0E
165 #define V35_CABLE 0x0C
166 #define V36_CABLE 0x02
167 #define NO_CABLE 0x00
168 #define START_DOWNLOAD 0x80
169 #define ICOM_INT_MASK_PRC_A 0x00003FFF
170 #define ICOM_INT_MASK_PRC_B 0x3FFF0000
171 #define ICOM_INT_MASK_PRC_C 0x00003FFF
172 #define ICOM_INT_MASK_PRC_D 0x3FFF0000
173 #define INT_RCV_COMPLETED 0x1000
174 #define INT_XMIT_COMPLETED 0x2000
175 #define INT_IDLE_DETECT 0x0800
176 #define INT_RCV_DISABLED 0x0400
177 #define INT_XMIT_DISABLED 0x0200
178 #define INT_RCV_XMIT_SHUTDOWN 0x0100
179 #define INT_FATAL_ERROR 0x0080
180 #define INT_CABLE_PULL 0x0020
181 #define INT_SIGNAL_CHANGE 0x0010
182 #define HDLC_PPP_PURE_ASYNC 0x02
183 #define HDLC_FF_FILL 0x00
184 #define HDLC_HDW_FLOW 0x01
185 #define START_XMIT 0x80
186 #define ICOM_ACFG_DRIVE1 0x20
187 #define ICOM_ACFG_NO_PARITY 0x00
188 #define ICOM_ACFG_PARITY_ENAB 0x02
189 #define ICOM_ACFG_PARITY_ODD 0x01
190 #define ICOM_ACFG_8BPC 0x00
191 #define ICOM_ACFG_7BPC 0x04
192 #define ICOM_ACFG_6BPC 0x08
193 #define ICOM_ACFG_5BPC 0x0C
194 #define ICOM_ACFG_1STOP_BIT 0x00
195 #define ICOM_ACFG_2STOP_BIT 0x10
196 #define ICOM_DTR 0x80
197 #define ICOM_RTS 0x40
198 #define ICOM_RI 0x08
199 #define ICOM_DSR 0x80
200 #define ICOM_DCD 0x20
201 #define ICOM_CTS 0x40
202
203 #define NUM_XBUFFS 1
204 #define NUM_RBUFFS 2
205 #define RCV_BUFF_SZ 0x0200
206 #define XMIT_BUFF_SZ 0x1000
207 struct statusArea {
208 /**********************************************/
209 /* Transmit Status Area */
210 /**********************************************/
211 struct xmit_status_area{
212 __le32 leNext; /* Next entry in Little Endian on Adapter */
213 __le32 leNextASD;
214 __le32 leBuffer; /* Buffer for entry in LE for Adapter */
215 __le16 leLengthASD;
216 __le16 leOffsetASD;
217 __le16 leLength; /* Length of data in segment */
218 __le16 flags;
219 #define SA_FLAGS_DONE 0x0080 /* Done with Segment */
220 #define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
221 #define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
222 #define SA_FLAGS_READY_TO_XMIT 0x0800
223 #define SA_FLAGS_STAT_MASK 0x007F
224 } xmit[NUM_XBUFFS];
225
226 /**********************************************/
227 /* Receive Status Area */
228 /**********************************************/
229 struct {
230 __le32 leNext; /* Next entry in Little Endian on Adapter */
231 __le32 leNextASD;
232 __le32 leBuffer; /* Buffer for entry in LE for Adapter */
233 __le16 WorkingLength; /* size of segment */
234 __le16 reserv01;
235 __le16 leLength; /* Length of data in segment */
236 __le16 flags;
237 #define SA_FL_RCV_DONE 0x0010 /* Data ready */
238 #define SA_FLAGS_OVERRUN 0x0040
239 #define SA_FLAGS_PARITY_ERROR 0x0080
240 #define SA_FLAGS_FRAME_ERROR 0x0001
241 #define SA_FLAGS_FRAME_TRUNC 0x0002
242 #define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */
243 #define SA_FLAGS_RCV_MASK 0xFFE6
244 } rcv[NUM_RBUFFS];
245 };
246
247 struct icom_adapter;
248
249
250 #define ICOM_MAJOR 243
251 #define ICOM_MINOR_START 0
252
253 struct icom_port {
254 struct uart_port uart_port;
255 unsigned char cable_id;
256 unsigned char read_status_mask;
257 unsigned char ignore_status_mask;
258 void __iomem * int_reg;
259 struct icom_regs __iomem *global_reg;
260 struct func_dram __iomem *dram;
261 int port;
262 struct statusArea *statStg;
263 dma_addr_t statStg_pci;
264 __le32 *xmitRestart;
265 dma_addr_t xmitRestart_pci;
266 unsigned char *xmit_buf;
267 dma_addr_t xmit_buf_pci;
268 unsigned char *recv_buf;
269 dma_addr_t recv_buf_pci;
270 int next_rcv;
271 int status;
272 #define ICOM_PORT_ACTIVE 1 /* Port exists. */
273 #define ICOM_PORT_OFF 0 /* Port does not exist. */
274 struct icom_adapter *adapter;
275 };
276
277 struct icom_adapter {
278 void __iomem * base_addr;
279 unsigned long base_addr_pci;
280 struct pci_dev *pci_dev;
281 struct icom_port port_info[4];
282 int index;
283 int version;
284 #define ADAPTER_V1 0x0001
285 #define ADAPTER_V2 0x0002
286 u32 subsystem_id;
287 #define FOUR_PORT_MODEL 0x0252
288 #define V2_TWO_PORTS_RVX 0x021A
289 #define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251
290 int numb_ports;
291 struct list_head icom_adapter_entry;
292 struct kref kref;
293 };
294
295 /* prototype */
296 extern void iCom_sercons_init(void);
297
298 struct lookup_proc_table {
299 u32 __iomem *global_control_reg;
300 unsigned long processor_id;
301 };
302
303 struct lookup_int_table {
304 u32 __iomem *global_int_mask;
305 unsigned long processor_id;
306 };
307
308 static inline struct icom_port *to_icom_port(struct uart_port *port)
309 {
310 return container_of(port, struct icom_port, uart_port);
311 }
312
313 static const struct pci_device_id icom_pci_table[] = {
314 {
315 .vendor = PCI_VENDOR_ID_IBM,
316 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1,
317 .subvendor = PCI_ANY_ID,
318 .subdevice = PCI_ANY_ID,
319 .driver_data = ADAPTER_V1,
320 },
321 {
322 .vendor = PCI_VENDOR_ID_IBM,
323 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
324 .subvendor = PCI_VENDOR_ID_IBM,
325 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX,
326 .driver_data = ADAPTER_V2,
327 },
328 {
329 .vendor = PCI_VENDOR_ID_IBM,
330 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
331 .subvendor = PCI_VENDOR_ID_IBM,
332 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM,
333 .driver_data = ADAPTER_V2,
334 },
335 {
336 .vendor = PCI_VENDOR_ID_IBM,
337 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
338 .subvendor = PCI_VENDOR_ID_IBM,
339 .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL,
340 .driver_data = ADAPTER_V2,
341 },
342 {
343 .vendor = PCI_VENDOR_ID_IBM,
344 .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
345 .subvendor = PCI_VENDOR_ID_IBM,
346 .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE,
347 .driver_data = ADAPTER_V2,
348 },
349 {}
350 };
351
352 static struct lookup_proc_table start_proc[4] = {
353 {NULL, ICOM_CONTROL_START_A},
354 {NULL, ICOM_CONTROL_START_B},
355 {NULL, ICOM_CONTROL_START_C},
356 {NULL, ICOM_CONTROL_START_D}
357 };
358
359
360 static struct lookup_proc_table stop_proc[4] = {
361 {NULL, ICOM_CONTROL_STOP_A},
362 {NULL, ICOM_CONTROL_STOP_B},
363 {NULL, ICOM_CONTROL_STOP_C},
364 {NULL, ICOM_CONTROL_STOP_D}
365 };
366
367 static struct lookup_int_table int_mask_tbl[4] = {
368 {NULL, ICOM_INT_MASK_PRC_A},
369 {NULL, ICOM_INT_MASK_PRC_B},
370 {NULL, ICOM_INT_MASK_PRC_C},
371 {NULL, ICOM_INT_MASK_PRC_D},
372 };
373
374
375 MODULE_DEVICE_TABLE(pci, icom_pci_table);
376
377 static LIST_HEAD(icom_adapter_head);
378
379 /* spinlock for adapter initialization and changing adapter operations */
380 static DEFINE_SPINLOCK(icom_lock);
381
382 #ifdef ICOM_TRACE
383 static inline void trace(struct icom_port *icom_port, char *trace_pt,
384 unsigned long trace_data)
385 {
386 dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
387 icom_port->port, trace_pt, trace_data);
388 }
389 #else
390 static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
391 #endif
392 static void icom_kref_release(struct kref *kref);
393
394 static void free_port_memory(struct icom_port *icom_port)
395 {
396 struct pci_dev *dev = icom_port->adapter->pci_dev;
397
398 trace(icom_port, "RET_PORT_MEM", 0);
399 if (icom_port->recv_buf) {
400 dma_free_coherent(&dev->dev, 4096, icom_port->recv_buf,
401 icom_port->recv_buf_pci);
402 icom_port->recv_buf = NULL;
403 }
404 if (icom_port->xmit_buf) {
405 dma_free_coherent(&dev->dev, 4096, icom_port->xmit_buf,
406 icom_port->xmit_buf_pci);
407 icom_port->xmit_buf = NULL;
408 }
409 if (icom_port->statStg) {
410 dma_free_coherent(&dev->dev, 4096, icom_port->statStg,
411 icom_port->statStg_pci);
412 icom_port->statStg = NULL;
413 }
414
415 if (icom_port->xmitRestart) {
416 dma_free_coherent(&dev->dev, 4096, icom_port->xmitRestart,
417 icom_port->xmitRestart_pci);
418 icom_port->xmitRestart = NULL;
419 }
420 }
421
422 static int get_port_memory(struct icom_port *icom_port)
423 {
424 int index;
425 unsigned long stgAddr;
426 unsigned long startStgAddr;
427 unsigned long offset;
428 struct pci_dev *dev = icom_port->adapter->pci_dev;
429
430 icom_port->xmit_buf =
431 dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmit_buf_pci,
432 GFP_KERNEL);
433 if (!icom_port->xmit_buf) {
434 dev_err(&dev->dev, "Can not allocate Transmit buffer\n");
435 return -ENOMEM;
436 }
437
438 trace(icom_port, "GET_PORT_MEM",
439 (unsigned long) icom_port->xmit_buf);
440
441 icom_port->recv_buf =
442 dma_alloc_coherent(&dev->dev, 4096, &icom_port->recv_buf_pci,
443 GFP_KERNEL);
444 if (!icom_port->recv_buf) {
445 dev_err(&dev->dev, "Can not allocate Receive buffer\n");
446 free_port_memory(icom_port);
447 return -ENOMEM;
448 }
449 trace(icom_port, "GET_PORT_MEM",
450 (unsigned long) icom_port->recv_buf);
451
452 icom_port->statStg =
453 dma_alloc_coherent(&dev->dev, 4096, &icom_port->statStg_pci,
454 GFP_KERNEL);
455 if (!icom_port->statStg) {
456 dev_err(&dev->dev, "Can not allocate Status buffer\n");
457 free_port_memory(icom_port);
458 return -ENOMEM;
459 }
460 trace(icom_port, "GET_PORT_MEM",
461 (unsigned long) icom_port->statStg);
462
463 icom_port->xmitRestart =
464 dma_alloc_coherent(&dev->dev, 4096, &icom_port->xmitRestart_pci,
465 GFP_KERNEL);
466 if (!icom_port->xmitRestart) {
467 dev_err(&dev->dev,
468 "Can not allocate xmit Restart buffer\n");
469 free_port_memory(icom_port);
470 return -ENOMEM;
471 }
472
473 /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that
474 indicates that frames are to be transmitted
475 */
476
477 stgAddr = (unsigned long) icom_port->statStg;
478 for (index = 0; index < NUM_XBUFFS; index++) {
479 trace(icom_port, "FOD_ADDR", stgAddr);
480 stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]);
481 if (index < (NUM_XBUFFS - 1)) {
482 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
483 icom_port->statStg->xmit[index].leLengthASD =
484 cpu_to_le16(XMIT_BUFF_SZ);
485 trace(icom_port, "FOD_ADDR", stgAddr);
486 trace(icom_port, "FOD_XBUFF",
487 (unsigned long) icom_port->xmit_buf);
488 icom_port->statStg->xmit[index].leBuffer =
489 cpu_to_le32(icom_port->xmit_buf_pci);
490 } else if (index == (NUM_XBUFFS - 1)) {
491 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
492 icom_port->statStg->xmit[index].leLengthASD =
493 cpu_to_le16(XMIT_BUFF_SZ);
494 trace(icom_port, "FOD_XBUFF",
495 (unsigned long) icom_port->xmit_buf);
496 icom_port->statStg->xmit[index].leBuffer =
497 cpu_to_le32(icom_port->xmit_buf_pci);
498 } else {
499 memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
500 }
501 }
502 /* FIDs */
503 startStgAddr = stgAddr;
504
505 /* fill in every entry, even if no buffer */
506 for (index = 0; index < NUM_RBUFFS; index++) {
507 trace(icom_port, "FID_ADDR", stgAddr);
508 stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]);
509 icom_port->statStg->rcv[index].leLength = 0;
510 icom_port->statStg->rcv[index].WorkingLength =
511 cpu_to_le16(RCV_BUFF_SZ);
512 if (index < (NUM_RBUFFS - 1) ) {
513 offset = stgAddr - (unsigned long) icom_port->statStg;
514 icom_port->statStg->rcv[index].leNext =
515 cpu_to_le32(icom_port-> statStg_pci + offset);
516 trace(icom_port, "FID_RBUFF",
517 (unsigned long) icom_port->recv_buf);
518 icom_port->statStg->rcv[index].leBuffer =
519 cpu_to_le32(icom_port->recv_buf_pci);
520 } else if (index == (NUM_RBUFFS -1) ) {
521 offset = startStgAddr - (unsigned long) icom_port->statStg;
522 icom_port->statStg->rcv[index].leNext =
523 cpu_to_le32(icom_port-> statStg_pci + offset);
524 trace(icom_port, "FID_RBUFF",
525 (unsigned long) icom_port->recv_buf + 2048);
526 icom_port->statStg->rcv[index].leBuffer =
527 cpu_to_le32(icom_port->recv_buf_pci + 2048);
528 } else {
529 icom_port->statStg->rcv[index].leNext = 0;
530 icom_port->statStg->rcv[index].leBuffer = 0;
531 }
532 }
533
534 return 0;
535 }
536
537 static void stop_processor(struct icom_port *icom_port)
538 {
539 unsigned long temp;
540 unsigned long flags;
541 int port;
542
543 spin_lock_irqsave(&icom_lock, flags);
544
545 port = icom_port->port;
546 if (port >= ARRAY_SIZE(stop_proc)) {
547 dev_err(&icom_port->adapter->pci_dev->dev,
548 "Invalid port assignment\n");
549 goto unlock;
550 }
551
552 if (port == 0 || port == 1)
553 stop_proc[port].global_control_reg = &icom_port->global_reg->control;
554 else
555 stop_proc[port].global_control_reg = &icom_port->global_reg->control_2;
556
557 temp = readl(stop_proc[port].global_control_reg);
558 temp = (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
559 writel(temp, stop_proc[port].global_control_reg);
560
561 /* write flush */
562 readl(stop_proc[port].global_control_reg);
563
564 unlock:
565 spin_unlock_irqrestore(&icom_lock, flags);
566 }
567
568 static void start_processor(struct icom_port *icom_port)
569 {
570 unsigned long temp;
571 unsigned long flags;
572 int port;
573
574 spin_lock_irqsave(&icom_lock, flags);
575
576 port = icom_port->port;
577 if (port >= ARRAY_SIZE(start_proc)) {
578 dev_err(&icom_port->adapter->pci_dev->dev,
579 "Invalid port assignment\n");
580 goto unlock;
581 }
582
583 if (port == 0 || port == 1)
584 start_proc[port].global_control_reg = &icom_port->global_reg->control;
585 else
586 start_proc[port].global_control_reg = &icom_port->global_reg->control_2;
587
588 temp = readl(start_proc[port].global_control_reg);
589 temp = (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
590 writel(temp, start_proc[port].global_control_reg);
591
592 /* write flush */
593 readl(start_proc[port].global_control_reg);
594
595 unlock:
596 spin_unlock_irqrestore(&icom_lock, flags);
597 }
598
599 static void load_code(struct icom_port *icom_port)
600 {
601 const struct firmware *fw;
602 char __iomem *iram_ptr;
603 int index;
604 int status = 0;
605 void __iomem *dram_ptr = icom_port->dram;
606 dma_addr_t temp_pci;
607 unsigned char *new_page = NULL;
608 unsigned char cable_id = NO_CABLE;
609 struct pci_dev *dev = icom_port->adapter->pci_dev;
610
611 /* Clear out any pending interrupts */
612 writew(0x3FFF, icom_port->int_reg);
613
614 trace(icom_port, "CLEAR_INTERRUPTS", 0);
615
616 /* Stop processor */
617 stop_processor(icom_port);
618
619 /* Zero out DRAM */
620 memset_io(dram_ptr, 0, 512);
621
622 /* Load Call Setup into Adapter */
623 if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) {
624 dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n");
625 status = -1;
626 goto load_code_exit;
627 }
628
629 if (fw->size > ICOM_DCE_IRAM_OFFSET) {
630 dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n");
631 release_firmware(fw);
632 status = -1;
633 goto load_code_exit;
634 }
635
636 iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET;
637 for (index = 0; index < fw->size; index++)
638 writeb(fw->data[index], &iram_ptr[index]);
639
640 release_firmware(fw);
641
642 /* Load Resident DCE portion of Adapter */
643 if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) {
644 dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n");
645 status = -1;
646 goto load_code_exit;
647 }
648
649 if (fw->size > ICOM_IRAM_SIZE) {
650 dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n");
651 release_firmware(fw);
652 status = -1;
653 goto load_code_exit;
654 }
655
656 iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET;
657 for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++)
658 writeb(fw->data[index], &iram_ptr[index]);
659
660 release_firmware(fw);
661
662 /* Set Hardware level */
663 if (icom_port->adapter->version == ADAPTER_V2)
664 writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
665
666 /* Start the processor in Adapter */
667 start_processor(icom_port);
668
669 writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL),
670 &(icom_port->dram->HDLCConfigReg));
671 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */
672 writeb(0x00, &(icom_port->dram->CmdReg));
673 writeb(0x10, &(icom_port->dram->async_config3));
674 writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC |
675 ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2));
676
677 /*Set up data in icom DRAM to indicate where personality
678 *code is located and its length.
679 */
680 new_page = dma_alloc_coherent(&dev->dev, 4096, &temp_pci, GFP_KERNEL);
681
682 if (!new_page) {
683 dev_err(&dev->dev, "Can not allocate DMA buffer\n");
684 status = -1;
685 goto load_code_exit;
686 }
687
688 if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) {
689 dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n");
690 status = -1;
691 goto load_code_exit;
692 }
693
694 if (fw->size > ICOM_DCE_IRAM_OFFSET) {
695 dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n");
696 release_firmware(fw);
697 status = -1;
698 goto load_code_exit;
699 }
700
701 for (index = 0; index < fw->size; index++)
702 new_page[index] = fw->data[index];
703
704 writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);
705 writel(temp_pci, &icom_port->dram->mac_load_addr);
706
707 release_firmware(fw);
708
709 /*Setting the syncReg to 0x80 causes adapter to start downloading
710 the personality code into adapter instruction RAM.
711 Once code is loaded, it will begin executing and, based on
712 information provided above, will start DMAing data from
713 shared memory to adapter DRAM.
714 */
715 /* the wait loop below verifies this write operation has been done
716 and processed
717 */
718 writeb(START_DOWNLOAD, &icom_port->dram->sync);
719
720 /* Wait max 1 Sec for data download and processor to start */
721 for (index = 0; index < 10; index++) {
722 msleep(100);
723 if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE)
724 break;
725 }
726
727 if (index == 10)
728 status = -1;
729
730 /*
731 * check Cable ID
732 */
733 cable_id = readb(&icom_port->dram->cable_id);
734
735 if (cable_id & ICOM_CABLE_ID_VALID) {
736 /* Get cable ID into the lower 4 bits (standard form) */
737 cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4;
738 icom_port->cable_id = cable_id;
739 } else {
740 dev_err(&dev->dev,"Invalid or no cable attached\n");
741 icom_port->cable_id = NO_CABLE;
742 }
743
744 load_code_exit:
745
746 if (status != 0) {
747 /* Clear out any pending interrupts */
748 writew(0x3FFF, icom_port->int_reg);
749
750 /* Turn off port */
751 writeb(ICOM_DISABLE, &(icom_port->dram->disable));
752
753 /* Stop processor */
754 stop_processor(icom_port);
755
756 dev_err(&icom_port->adapter->pci_dev->dev,"Port not operational\n");
757 }
758
759 if (new_page != NULL)
760 dma_free_coherent(&dev->dev, 4096, new_page, temp_pci);
761 }
762
763 static int startup(struct icom_port *icom_port)
764 {
765 unsigned long temp;
766 unsigned char cable_id, raw_cable_id;
767 unsigned long flags;
768 int port;
769
770 trace(icom_port, "STARTUP", 0);
771
772 if (!icom_port->dram) {
773 /* should NEVER be NULL */
774 dev_err(&icom_port->adapter->pci_dev->dev,
775 "Unusable Port, port configuration missing\n");
776 return -ENODEV;
777 }
778
779 /*
780 * check Cable ID
781 */
782 raw_cable_id = readb(&icom_port->dram->cable_id);
783 trace(icom_port, "CABLE_ID", raw_cable_id);
784
785 /* Get cable ID into the lower 4 bits (standard form) */
786 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
787
788 /* Check for valid Cable ID */
789 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
790 (cable_id != icom_port->cable_id)) {
791
792 /* reload adapter code, pick up any potential changes in cable id */
793 load_code(icom_port);
794
795 /* still no sign of cable, error out */
796 raw_cable_id = readb(&icom_port->dram->cable_id);
797 cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
798 if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
799 (icom_port->cable_id == NO_CABLE))
800 return -EIO;
801 }
802
803 /*
804 * Finally, clear and enable interrupts
805 */
806 spin_lock_irqsave(&icom_lock, flags);
807 port = icom_port->port;
808 if (port >= ARRAY_SIZE(int_mask_tbl)) {
809 dev_err(&icom_port->adapter->pci_dev->dev,
810 "Invalid port assignment\n");
811 goto unlock;
812 }
813
814 if (port == 0 || port == 1)
815 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
816 else
817 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
818
819 if (port == 0 || port == 2)
820 writew(0x00FF, icom_port->int_reg);
821 else
822 writew(0x3F00, icom_port->int_reg);
823
824 temp = readl(int_mask_tbl[port].global_int_mask);
825 writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
826
827 /* write flush */
828 readl(int_mask_tbl[port].global_int_mask);
829
830 unlock:
831 spin_unlock_irqrestore(&icom_lock, flags);
832 return 0;
833 }
834
835 static void shutdown(struct icom_port *icom_port)
836 {
837 unsigned long temp;
838 unsigned char cmdReg;
839 unsigned long flags;
840 int port;
841
842 spin_lock_irqsave(&icom_lock, flags);
843 trace(icom_port, "SHUTDOWN", 0);
844
845 /*
846 * disable all interrupts
847 */
848 port = icom_port->port;
849 if (port >= ARRAY_SIZE(int_mask_tbl)) {
850 dev_err(&icom_port->adapter->pci_dev->dev,
851 "Invalid port assignment\n");
852 goto unlock;
853 }
854 if (port == 0 || port == 1)
855 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
856 else
857 int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
858
859 temp = readl(int_mask_tbl[port].global_int_mask);
860 writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
861
862 /* write flush */
863 readl(int_mask_tbl[port].global_int_mask);
864
865 unlock:
866 spin_unlock_irqrestore(&icom_lock, flags);
867
868 /*
869 * disable break condition
870 */
871 cmdReg = readb(&icom_port->dram->CmdReg);
872 if (cmdReg & CMD_SND_BREAK) {
873 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
874 }
875 }
876
877 static int icom_write(struct uart_port *port)
878 {
879 struct icom_port *icom_port = to_icom_port(port);
880 struct tty_port *tport = &port->state->port;
881 unsigned long data_count;
882 unsigned char cmdReg;
883 unsigned long offset;
884
885 trace(icom_port, "WRITE", 0);
886
887 if (le16_to_cpu(icom_port->statStg->xmit[0].flags) &
888 SA_FLAGS_READY_TO_XMIT) {
889 trace(icom_port, "WRITE_FULL", 0);
890 return 0;
891 }
892
893 data_count = kfifo_out_peek(&tport->xmit_fifo, icom_port->xmit_buf,
894 XMIT_BUFF_SZ);
895
896 if (data_count) {
897 icom_port->statStg->xmit[0].flags =
898 cpu_to_le16(SA_FLAGS_READY_TO_XMIT);
899 icom_port->statStg->xmit[0].leLength =
900 cpu_to_le16(data_count);
901 offset =
902 (unsigned long) &icom_port->statStg->xmit[0] -
903 (unsigned long) icom_port->statStg;
904 *icom_port->xmitRestart =
905 cpu_to_le32(icom_port->statStg_pci + offset);
906 cmdReg = readb(&icom_port->dram->CmdReg);
907 writeb(cmdReg | CMD_XMIT_RCV_ENABLE,
908 &icom_port->dram->CmdReg);
909 writeb(START_XMIT, &icom_port->dram->StartXmitCmd);
910 trace(icom_port, "WRITE_START", data_count);
911 /* write flush */
912 readb(&icom_port->dram->StartXmitCmd);
913 }
914
915 return data_count;
916 }
917
918 static inline void check_modem_status(struct icom_port *icom_port)
919 {
920 static char old_status = 0;
921 char delta_status;
922 unsigned char status;
923
924 uart_port_lock(&icom_port->uart_port);
925
926 /*modem input register */
927 status = readb(&icom_port->dram->isr);
928 trace(icom_port, "CHECK_MODEM", status);
929 delta_status = status ^ old_status;
930 if (delta_status) {
931 if (delta_status & ICOM_RI)
932 icom_port->uart_port.icount.rng++;
933 if (delta_status & ICOM_DSR)
934 icom_port->uart_port.icount.dsr++;
935 if (delta_status & ICOM_DCD)
936 uart_handle_dcd_change(&icom_port->uart_port,
937 delta_status & ICOM_DCD);
938 if (delta_status & ICOM_CTS)
939 uart_handle_cts_change(&icom_port->uart_port,
940 delta_status & ICOM_CTS);
941
942 wake_up_interruptible(&icom_port->uart_port.state->
943 port.delta_msr_wait);
944 old_status = status;
945 }
946 uart_port_unlock(&icom_port->uart_port);
947 }
948
949 static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
950 {
951 struct tty_port *tport = &icom_port->uart_port.state->port;
952 u16 count;
953
954 if (port_int_reg & (INT_XMIT_COMPLETED)) {
955 trace(icom_port, "XMIT_COMPLETE", 0);
956
957 /* clear buffer in use bit */
958 icom_port->statStg->xmit[0].flags &=
959 cpu_to_le16(~SA_FLAGS_READY_TO_XMIT);
960
961 count = le16_to_cpu(icom_port->statStg->xmit[0].leLength);
962 icom_port->uart_port.icount.tx += count;
963
964 kfifo_skip_count(&tport->xmit_fifo, count);
965
966 if (!icom_write(&icom_port->uart_port))
967 /* activate write queue */
968 uart_write_wakeup(&icom_port->uart_port);
969 } else
970 trace(icom_port, "XMIT_DISABLED", 0);
971 }
972
973 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
974 {
975 short int count, rcv_buff;
976 struct tty_port *port = &icom_port->uart_port.state->port;
977 u16 status;
978 struct uart_icount *icount;
979 unsigned long offset;
980 unsigned char flag;
981
982 trace(icom_port, "RCV_COMPLETE", 0);
983 rcv_buff = icom_port->next_rcv;
984
985 status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags);
986 while (status & SA_FL_RCV_DONE) {
987 int first = -1;
988
989 trace(icom_port, "FID_STATUS", status);
990 count = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].leLength);
991
992 trace(icom_port, "RCV_COUNT", count);
993
994 trace(icom_port, "REAL_COUNT", count);
995
996 offset = le32_to_cpu(icom_port->statStg->rcv[rcv_buff].leBuffer) -
997 icom_port->recv_buf_pci;
998
999 /* Block copy all but the last byte as this may have status */
1000 if (count > 0) {
1001 first = icom_port->recv_buf[offset];
1002 tty_insert_flip_string(port, icom_port->recv_buf + offset, count - 1);
1003 }
1004
1005 icount = &icom_port->uart_port.icount;
1006 icount->rx += count;
1007
1008 /* Break detect logic */
1009 if ((status & SA_FLAGS_FRAME_ERROR)
1010 && first == 0) {
1011 status &= ~SA_FLAGS_FRAME_ERROR;
1012 status |= SA_FLAGS_BREAK_DET;
1013 trace(icom_port, "BREAK_DET", 0);
1014 }
1015
1016 flag = TTY_NORMAL;
1017
1018 if (status &
1019 (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR |
1020 SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) {
1021
1022 if (status & SA_FLAGS_BREAK_DET)
1023 icount->brk++;
1024 if (status & SA_FLAGS_PARITY_ERROR)
1025 icount->parity++;
1026 if (status & SA_FLAGS_FRAME_ERROR)
1027 icount->frame++;
1028 if (status & SA_FLAGS_OVERRUN)
1029 icount->overrun++;
1030
1031 /*
1032 * Now check to see if character should be
1033 * ignored, and mask off conditions which
1034 * should be ignored.
1035 */
1036 if (status & icom_port->ignore_status_mask) {
1037 trace(icom_port, "IGNORE_CHAR", 0);
1038 goto ignore_char;
1039 }
1040
1041 status &= icom_port->read_status_mask;
1042
1043 if (status & SA_FLAGS_BREAK_DET) {
1044 flag = TTY_BREAK;
1045 } else if (status & SA_FLAGS_PARITY_ERROR) {
1046 trace(icom_port, "PARITY_ERROR", 0);
1047 flag = TTY_PARITY;
1048 } else if (status & SA_FLAGS_FRAME_ERROR)
1049 flag = TTY_FRAME;
1050
1051 }
1052
1053 tty_insert_flip_char(port, *(icom_port->recv_buf + offset + count - 1), flag);
1054
1055 if (status & SA_FLAGS_OVERRUN)
1056 /*
1057 * Overrun is special, since it's
1058 * reported immediately, and doesn't
1059 * affect the current character
1060 */
1061 tty_insert_flip_char(port, 0, TTY_OVERRUN);
1062 ignore_char:
1063 icom_port->statStg->rcv[rcv_buff].flags = 0;
1064 icom_port->statStg->rcv[rcv_buff].leLength = 0;
1065 icom_port->statStg->rcv[rcv_buff].WorkingLength =
1066 cpu_to_le16(RCV_BUFF_SZ);
1067
1068 rcv_buff++;
1069 if (rcv_buff == NUM_RBUFFS)
1070 rcv_buff = 0;
1071
1072 status = le16_to_cpu(icom_port->statStg->rcv[rcv_buff].flags);
1073 }
1074 icom_port->next_rcv = rcv_buff;
1075
1076 tty_flip_buffer_push(port);
1077 }
1078
1079 static void process_interrupt(u16 port_int_reg,
1080 struct icom_port *icom_port)
1081 {
1082
1083 uart_port_lock(&icom_port->uart_port);
1084 trace(icom_port, "INTERRUPT", port_int_reg);
1085
1086 if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED))
1087 xmit_interrupt(port_int_reg, icom_port);
1088
1089 if (port_int_reg & INT_RCV_COMPLETED)
1090 recv_interrupt(port_int_reg, icom_port);
1091
1092 uart_port_unlock(&icom_port->uart_port);
1093 }
1094
1095 static irqreturn_t icom_interrupt(int irq, void *dev_id)
1096 {
1097 void __iomem * int_reg;
1098 u32 adapter_interrupts;
1099 u16 port_int_reg;
1100 struct icom_adapter *icom_adapter;
1101 struct icom_port *icom_port;
1102
1103 /* find icom_port for this interrupt */
1104 icom_adapter = (struct icom_adapter *) dev_id;
1105
1106 if (icom_adapter->version == ADAPTER_V2) {
1107 int_reg = icom_adapter->base_addr + 0x8024;
1108
1109 adapter_interrupts = readl(int_reg);
1110
1111 if (adapter_interrupts & 0x00003FFF) {
1112 /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */
1113 icom_port = &icom_adapter->port_info[2];
1114 port_int_reg = (u16) adapter_interrupts;
1115 process_interrupt(port_int_reg, icom_port);
1116 check_modem_status(icom_port);
1117 }
1118 if (adapter_interrupts & 0x3FFF0000) {
1119 /* port 3 interrupt */
1120 icom_port = &icom_adapter->port_info[3];
1121 if (icom_port->status == ICOM_PORT_ACTIVE) {
1122 port_int_reg =
1123 (u16) (adapter_interrupts >> 16);
1124 process_interrupt(port_int_reg, icom_port);
1125 check_modem_status(icom_port);
1126 }
1127 }
1128
1129 /* Clear out any pending interrupts */
1130 writel(adapter_interrupts, int_reg);
1131
1132 int_reg = icom_adapter->base_addr + 0x8004;
1133 } else {
1134 int_reg = icom_adapter->base_addr + 0x4004;
1135 }
1136
1137 adapter_interrupts = readl(int_reg);
1138
1139 if (adapter_interrupts & 0x00003FFF) {
1140 /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */
1141 icom_port = &icom_adapter->port_info[0];
1142 port_int_reg = (u16) adapter_interrupts;
1143 process_interrupt(port_int_reg, icom_port);
1144 check_modem_status(icom_port);
1145 }
1146 if (adapter_interrupts & 0x3FFF0000) {
1147 /* port 1 interrupt */
1148 icom_port = &icom_adapter->port_info[1];
1149 if (icom_port->status == ICOM_PORT_ACTIVE) {
1150 port_int_reg = (u16) (adapter_interrupts >> 16);
1151 process_interrupt(port_int_reg, icom_port);
1152 check_modem_status(icom_port);
1153 }
1154 }
1155
1156 /* Clear out any pending interrupts */
1157 writel(adapter_interrupts, int_reg);
1158
1159 /* flush the write */
1160 adapter_interrupts = readl(int_reg);
1161
1162 return IRQ_HANDLED;
1163 }
1164
1165 /*
1166 * ------------------------------------------------------------------
1167 * Begin serial-core API
1168 * ------------------------------------------------------------------
1169 */
1170 static unsigned int icom_tx_empty(struct uart_port *port)
1171 {
1172 struct icom_port *icom_port = to_icom_port(port);
1173 int ret;
1174 unsigned long flags;
1175
1176 uart_port_lock_irqsave(port, &flags);
1177 if (le16_to_cpu(icom_port->statStg->xmit[0].flags) &
1178 SA_FLAGS_READY_TO_XMIT)
1179 ret = TIOCSER_TEMT;
1180 else
1181 ret = 0;
1182
1183 uart_port_unlock_irqrestore(port, flags);
1184 return ret;
1185 }
1186
1187 static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl)
1188 {
1189 struct icom_port *icom_port = to_icom_port(port);
1190 unsigned char local_osr;
1191
1192 trace(icom_port, "SET_MODEM", 0);
1193 local_osr = readb(&icom_port->dram->osr);
1194
1195 if (mctrl & TIOCM_RTS) {
1196 trace(icom_port, "RAISE_RTS", 0);
1197 local_osr |= ICOM_RTS;
1198 } else {
1199 trace(icom_port, "LOWER_RTS", 0);
1200 local_osr &= ~ICOM_RTS;
1201 }
1202
1203 if (mctrl & TIOCM_DTR) {
1204 trace(icom_port, "RAISE_DTR", 0);
1205 local_osr |= ICOM_DTR;
1206 } else {
1207 trace(icom_port, "LOWER_DTR", 0);
1208 local_osr &= ~ICOM_DTR;
1209 }
1210
1211 writeb(local_osr, &icom_port->dram->osr);
1212 }
1213
1214 static unsigned int icom_get_mctrl(struct uart_port *port)
1215 {
1216 struct icom_port *icom_port = to_icom_port(port);
1217 unsigned char status;
1218 unsigned int result;
1219
1220 trace(icom_port, "GET_MODEM", 0);
1221
1222 status = readb(&icom_port->dram->isr);
1223
1224 result = ((status & ICOM_DCD) ? TIOCM_CAR : 0)
1225 | ((status & ICOM_RI) ? TIOCM_RNG : 0)
1226 | ((status & ICOM_DSR) ? TIOCM_DSR : 0)
1227 | ((status & ICOM_CTS) ? TIOCM_CTS : 0);
1228 return result;
1229 }
1230
1231 static void icom_stop_tx(struct uart_port *port)
1232 {
1233 struct icom_port *icom_port = to_icom_port(port);
1234 unsigned char cmdReg;
1235
1236 trace(icom_port, "STOP", 0);
1237 cmdReg = readb(&icom_port->dram->CmdReg);
1238 writeb(cmdReg | CMD_HOLD_XMIT, &icom_port->dram->CmdReg);
1239 }
1240
1241 static void icom_start_tx(struct uart_port *port)
1242 {
1243 struct icom_port *icom_port = to_icom_port(port);
1244 unsigned char cmdReg;
1245
1246 trace(icom_port, "START", 0);
1247 cmdReg = readb(&icom_port->dram->CmdReg);
1248 if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT)
1249 writeb(cmdReg & ~CMD_HOLD_XMIT,
1250 &icom_port->dram->CmdReg);
1251
1252 icom_write(port);
1253 }
1254
1255 static void icom_send_xchar(struct uart_port *port, char ch)
1256 {
1257 struct icom_port *icom_port = to_icom_port(port);
1258 unsigned char xdata;
1259 int index;
1260 unsigned long flags;
1261
1262 trace(icom_port, "SEND_XCHAR", ch);
1263
1264 /* wait .1 sec to send char */
1265 for (index = 0; index < 10; index++) {
1266 uart_port_lock_irqsave(port, &flags);
1267 xdata = readb(&icom_port->dram->xchar);
1268 if (xdata == 0x00) {
1269 trace(icom_port, "QUICK_WRITE", 0);
1270 writeb(ch, &icom_port->dram->xchar);
1271
1272 /* flush write operation */
1273 xdata = readb(&icom_port->dram->xchar);
1274 uart_port_unlock_irqrestore(port, flags);
1275 break;
1276 }
1277 uart_port_unlock_irqrestore(port, flags);
1278 msleep(10);
1279 }
1280 }
1281
1282 static void icom_stop_rx(struct uart_port *port)
1283 {
1284 struct icom_port *icom_port = to_icom_port(port);
1285 unsigned char cmdReg;
1286
1287 cmdReg = readb(&icom_port->dram->CmdReg);
1288 writeb(cmdReg & ~CMD_RCV_ENABLE, &icom_port->dram->CmdReg);
1289 }
1290
1291 static void icom_break(struct uart_port *port, int break_state)
1292 {
1293 struct icom_port *icom_port = to_icom_port(port);
1294 unsigned char cmdReg;
1295 unsigned long flags;
1296
1297 uart_port_lock_irqsave(port, &flags);
1298 trace(icom_port, "BREAK", 0);
1299 cmdReg = readb(&icom_port->dram->CmdReg);
1300 if (break_state == -1) {
1301 writeb(cmdReg | CMD_SND_BREAK, &icom_port->dram->CmdReg);
1302 } else {
1303 writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
1304 }
1305 uart_port_unlock_irqrestore(port, flags);
1306 }
1307
1308 static int icom_open(struct uart_port *port)
1309 {
1310 struct icom_port *icom_port = to_icom_port(port);
1311 int retval;
1312
1313 kref_get(&icom_port->adapter->kref);
1314 retval = startup(icom_port);
1315
1316 if (retval) {
1317 kref_put(&icom_port->adapter->kref, icom_kref_release);
1318 trace(icom_port, "STARTUP_ERROR", 0);
1319 return retval;
1320 }
1321
1322 return 0;
1323 }
1324
1325 static void icom_close(struct uart_port *port)
1326 {
1327 struct icom_port *icom_port = to_icom_port(port);
1328 unsigned char cmdReg;
1329
1330 trace(icom_port, "CLOSE", 0);
1331
1332 /* stop receiver */
1333 cmdReg = readb(&icom_port->dram->CmdReg);
1334 writeb(cmdReg & ~CMD_RCV_ENABLE, &icom_port->dram->CmdReg);
1335
1336 shutdown(icom_port);
1337
1338 kref_put(&icom_port->adapter->kref, icom_kref_release);
1339 }
1340
1341 static void icom_set_termios(struct uart_port *port, struct ktermios *termios,
1342 const struct ktermios *old_termios)
1343 {
1344 struct icom_port *icom_port = to_icom_port(port);
1345 int baud;
1346 unsigned cflag, iflag;
1347 char new_config2;
1348 char new_config3 = 0;
1349 char tmp_byte;
1350 int index;
1351 int rcv_buff, xmit_buff;
1352 unsigned long offset;
1353 unsigned long flags;
1354
1355 uart_port_lock_irqsave(port, &flags);
1356 trace(icom_port, "CHANGE_SPEED", 0);
1357
1358 cflag = termios->c_cflag;
1359 iflag = termios->c_iflag;
1360
1361 new_config2 = ICOM_ACFG_DRIVE1;
1362
1363 /* byte size and parity */
1364 switch (cflag & CSIZE) {
1365 case CS5: /* 5 bits/char */
1366 new_config2 |= ICOM_ACFG_5BPC;
1367 break;
1368 case CS6: /* 6 bits/char */
1369 new_config2 |= ICOM_ACFG_6BPC;
1370 break;
1371 case CS7: /* 7 bits/char */
1372 new_config2 |= ICOM_ACFG_7BPC;
1373 break;
1374 case CS8: /* 8 bits/char */
1375 new_config2 |= ICOM_ACFG_8BPC;
1376 break;
1377 default:
1378 break;
1379 }
1380 if (cflag & CSTOPB) {
1381 /* 2 stop bits */
1382 new_config2 |= ICOM_ACFG_2STOP_BIT;
1383 }
1384 if (cflag & PARENB) {
1385 /* parity bit enabled */
1386 new_config2 |= ICOM_ACFG_PARITY_ENAB;
1387 trace(icom_port, "PARENB", 0);
1388 }
1389 if (cflag & PARODD) {
1390 /* odd parity */
1391 new_config2 |= ICOM_ACFG_PARITY_ODD;
1392 trace(icom_port, "PARODD", 0);
1393 }
1394
1395 /* Determine divisor based on baud rate */
1396 baud = uart_get_baud_rate(port, termios, old_termios,
1397 icom_acfg_baud[0],
1398 icom_acfg_baud[BAUD_TABLE_LIMIT]);
1399 if (!baud)
1400 baud = 9600; /* B0 transition handled in rs_set_termios */
1401
1402 for (index = 0; index < BAUD_TABLE_LIMIT; index++) {
1403 if (icom_acfg_baud[index] == baud) {
1404 new_config3 = index;
1405 break;
1406 }
1407 }
1408
1409 uart_update_timeout(port, cflag, baud);
1410
1411 /* CTS flow control flag and modem status interrupts */
1412 tmp_byte = readb(&(icom_port->dram->HDLCConfigReg));
1413 if (cflag & CRTSCTS)
1414 tmp_byte |= HDLC_HDW_FLOW;
1415 else
1416 tmp_byte &= ~HDLC_HDW_FLOW;
1417 writeb(tmp_byte, &(icom_port->dram->HDLCConfigReg));
1418
1419 /*
1420 * Set up parity check flag
1421 */
1422 icom_port->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE;
1423 if (iflag & INPCK)
1424 icom_port->read_status_mask |=
1425 SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR;
1426
1427 if ((iflag & BRKINT) || (iflag & PARMRK))
1428 icom_port->read_status_mask |= SA_FLAGS_BREAK_DET;
1429
1430 /*
1431 * Characters to ignore
1432 */
1433 icom_port->ignore_status_mask = 0;
1434 if (iflag & IGNPAR)
1435 icom_port->ignore_status_mask |=
1436 SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR;
1437 if (iflag & IGNBRK) {
1438 icom_port->ignore_status_mask |= SA_FLAGS_BREAK_DET;
1439 /*
1440 * If we're ignore parity and break indicators, ignore
1441 * overruns too. (For real raw support).
1442 */
1443 if (iflag & IGNPAR)
1444 icom_port->ignore_status_mask |= SA_FLAGS_OVERRUN;
1445 }
1446
1447 /*
1448 * !!! ignore all characters if CREAD is not set
1449 */
1450 if ((cflag & CREAD) == 0)
1451 icom_port->ignore_status_mask |= SA_FL_RCV_DONE;
1452
1453 /* Turn off Receiver to prepare for reset */
1454 writeb(CMD_RCV_DISABLE, &icom_port->dram->CmdReg);
1455
1456 for (index = 0; index < 10; index++) {
1457 if (readb(&icom_port->dram->PrevCmdReg) == 0x00) {
1458 break;
1459 }
1460 }
1461
1462 /* clear all current buffers of data */
1463 for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) {
1464 icom_port->statStg->rcv[rcv_buff].flags = 0;
1465 icom_port->statStg->rcv[rcv_buff].leLength = 0;
1466 icom_port->statStg->rcv[rcv_buff].WorkingLength =
1467 cpu_to_le16(RCV_BUFF_SZ);
1468 }
1469
1470 for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) {
1471 icom_port->statStg->xmit[xmit_buff].flags = 0;
1472 }
1473
1474 /* activate changes and start xmit and receiver here */
1475 /* Enable the receiver */
1476 writeb(new_config3, &(icom_port->dram->async_config3));
1477 writeb(new_config2, &(icom_port->dram->async_config2));
1478 tmp_byte = readb(&(icom_port->dram->HDLCConfigReg));
1479 tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL;
1480 writeb(tmp_byte, &(icom_port->dram->HDLCConfigReg));
1481 writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */
1482 writeb(0xFF, &(icom_port->dram->ier)); /* enable modem signal interrupts */
1483
1484 /* reset processor */
1485 writeb(CMD_RESTART, &icom_port->dram->CmdReg);
1486
1487 for (index = 0; index < 10; index++) {
1488 if (readb(&icom_port->dram->CmdReg) == 0x00) {
1489 break;
1490 }
1491 }
1492
1493 /* Enable Transmitter and Receiver */
1494 offset =
1495 (unsigned long) &icom_port->statStg->rcv[0] -
1496 (unsigned long) icom_port->statStg;
1497 writel(icom_port->statStg_pci + offset,
1498 &icom_port->dram->RcvStatusAddr);
1499 icom_port->next_rcv = 0;
1500 *icom_port->xmitRestart = 0;
1501 writel(icom_port->xmitRestart_pci,
1502 &icom_port->dram->XmitStatusAddr);
1503 trace(icom_port, "XR_ENAB", 0);
1504 writeb(CMD_XMIT_RCV_ENABLE, &icom_port->dram->CmdReg);
1505
1506 uart_port_unlock_irqrestore(port, flags);
1507 }
1508
1509 static const char *icom_type(struct uart_port *port)
1510 {
1511 return "icom";
1512 }
1513
1514 static void icom_config_port(struct uart_port *port, int flags)
1515 {
1516 port->type = PORT_ICOM;
1517 }
1518
1519 static const struct uart_ops icom_ops = {
1520 .tx_empty = icom_tx_empty,
1521 .set_mctrl = icom_set_mctrl,
1522 .get_mctrl = icom_get_mctrl,
1523 .stop_tx = icom_stop_tx,
1524 .start_tx = icom_start_tx,
1525 .send_xchar = icom_send_xchar,
1526 .stop_rx = icom_stop_rx,
1527 .break_ctl = icom_break,
1528 .startup = icom_open,
1529 .shutdown = icom_close,
1530 .set_termios = icom_set_termios,
1531 .type = icom_type,
1532 .config_port = icom_config_port,
1533 };
1534
1535 #define ICOM_CONSOLE NULL
1536
1537 static struct uart_driver icom_uart_driver = {
1538 .owner = THIS_MODULE,
1539 .driver_name = ICOM_DRIVER_NAME,
1540 .dev_name = "ttyA",
1541 .major = ICOM_MAJOR,
1542 .minor = ICOM_MINOR_START,
1543 .nr = NR_PORTS,
1544 .cons = ICOM_CONSOLE,
1545 };
1546
1547 static int icom_init_ports(struct icom_adapter *icom_adapter)
1548 {
1549 u32 subsystem_id = icom_adapter->subsystem_id;
1550 int i;
1551 struct icom_port *icom_port;
1552
1553 if (icom_adapter->version == ADAPTER_V1) {
1554 icom_adapter->numb_ports = 2;
1555
1556 for (i = 0; i < 2; i++) {
1557 icom_port = &icom_adapter->port_info[i];
1558 icom_port->port = i;
1559 icom_port->status = ICOM_PORT_ACTIVE;
1560 }
1561 } else {
1562 if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) {
1563 icom_adapter->numb_ports = 4;
1564
1565 for (i = 0; i < 4; i++) {
1566 icom_port = &icom_adapter->port_info[i];
1567
1568 icom_port->port = i;
1569 icom_port->status = ICOM_PORT_ACTIVE;
1570 }
1571 } else {
1572 icom_adapter->numb_ports = 4;
1573
1574 icom_adapter->port_info[0].port = 0;
1575 icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE;
1576 icom_adapter->port_info[1].status = ICOM_PORT_OFF;
1577 icom_adapter->port_info[2].port = 2;
1578 icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE;
1579 icom_adapter->port_info[3].status = ICOM_PORT_OFF;
1580 }
1581 }
1582
1583 return 0;
1584 }
1585
1586 static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num)
1587 {
1588 if (icom_adapter->version == ADAPTER_V1) {
1589 icom_port->global_reg = icom_adapter->base_addr + 0x4000;
1590 icom_port->int_reg = icom_adapter->base_addr +
1591 0x4004 + 2 - 2 * port_num;
1592 } else {
1593 icom_port->global_reg = icom_adapter->base_addr + 0x8000;
1594 if (icom_port->port < 2)
1595 icom_port->int_reg = icom_adapter->base_addr +
1596 0x8004 + 2 - 2 * icom_port->port;
1597 else
1598 icom_port->int_reg = icom_adapter->base_addr +
1599 0x8024 + 2 - 2 * (icom_port->port - 2);
1600 }
1601 }
1602 static int icom_load_ports(struct icom_adapter *icom_adapter)
1603 {
1604 struct icom_port *icom_port;
1605 int port_num;
1606
1607 for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) {
1608
1609 icom_port = &icom_adapter->port_info[port_num];
1610
1611 if (icom_port->status == ICOM_PORT_ACTIVE) {
1612 icom_port_active(icom_port, icom_adapter, port_num);
1613 icom_port->dram = icom_adapter->base_addr +
1614 0x2000 * icom_port->port;
1615
1616 icom_port->adapter = icom_adapter;
1617
1618 /* get port memory */
1619 if (get_port_memory(icom_port) != 0) {
1620 dev_err(&icom_port->adapter->pci_dev->dev,
1621 "Memory allocation for port FAILED\n");
1622 }
1623 }
1624 }
1625 return 0;
1626 }
1627
1628 static int icom_alloc_adapter(struct icom_adapter
1629 **icom_adapter_ref)
1630 {
1631 int adapter_count = 0;
1632 struct icom_adapter *icom_adapter;
1633 struct icom_adapter *cur_adapter_entry;
1634
1635 icom_adapter = kzalloc(sizeof(struct icom_adapter), GFP_KERNEL);
1636
1637 if (!icom_adapter) {
1638 return -ENOMEM;
1639 }
1640
1641 list_for_each_entry(cur_adapter_entry, &icom_adapter_head,
1642 icom_adapter_entry) {
1643 if (cur_adapter_entry->index != adapter_count) {
1644 break;
1645 }
1646 adapter_count++;
1647 }
1648
1649 icom_adapter->index = adapter_count;
1650 list_add_tail(&icom_adapter->icom_adapter_entry,
1651 &cur_adapter_entry->icom_adapter_entry);
1652
1653 *icom_adapter_ref = icom_adapter;
1654 return 0;
1655 }
1656
1657 static void icom_free_adapter(struct icom_adapter *icom_adapter)
1658 {
1659 list_del(&icom_adapter->icom_adapter_entry);
1660 kfree(icom_adapter);
1661 }
1662
1663 static void icom_kref_release(struct kref *kref)
1664 {
1665 struct icom_adapter *icom_adapter = container_of(kref,
1666 struct icom_adapter, kref);
1667 struct icom_port *icom_port;
1668 int index;
1669
1670 for (index = 0; index < icom_adapter->numb_ports; index++) {
1671 icom_port = &icom_adapter->port_info[index];
1672
1673 if (icom_port->status == ICOM_PORT_ACTIVE) {
1674 dev_info(&icom_adapter->pci_dev->dev,
1675 "Device removed\n");
1676
1677 uart_remove_one_port(&icom_uart_driver,
1678 &icom_port->uart_port);
1679
1680 /* be sure that DTR and RTS are dropped */
1681 writeb(0x00, &icom_port->dram->osr);
1682
1683 /* Wait 0.1 Sec for simple Init to complete */
1684 msleep(100);
1685
1686 /* Stop proccessor */
1687 stop_processor(icom_port);
1688
1689 free_port_memory(icom_port);
1690 }
1691 }
1692
1693 free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
1694 iounmap(icom_adapter->base_addr);
1695 pci_release_regions(icom_adapter->pci_dev);
1696 icom_free_adapter(icom_adapter);
1697 }
1698
1699 static int icom_probe(struct pci_dev *dev,
1700 const struct pci_device_id *ent)
1701 {
1702 int index;
1703 unsigned int command_reg;
1704 int retval;
1705 struct icom_adapter *icom_adapter;
1706 struct icom_port *icom_port;
1707
1708 retval = pci_enable_device(dev);
1709 if (retval) {
1710 dev_err(&dev->dev, "Device enable FAILED\n");
1711 return retval;
1712 }
1713
1714 retval = pci_request_regions(dev, "icom");
1715 if (retval) {
1716 dev_err(&dev->dev, "pci_request_regions FAILED\n");
1717 pci_disable_device(dev);
1718 return retval;
1719 }
1720
1721 pci_set_master(dev);
1722
1723 retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg);
1724 if (retval) {
1725 dev_err(&dev->dev, "PCI Config read FAILED\n");
1726 goto probe_exit0;
1727 }
1728
1729 pci_write_config_dword(dev, PCI_COMMAND,
1730 command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
1731 | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
1732
1733 if (ent->driver_data == ADAPTER_V1) {
1734 pci_write_config_dword(dev, 0x44, 0x8300830A);
1735 } else {
1736 pci_write_config_dword(dev, 0x44, 0x42004200);
1737 pci_write_config_dword(dev, 0x48, 0x42004200);
1738 }
1739
1740
1741 retval = icom_alloc_adapter(&icom_adapter);
1742 if (retval) {
1743 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n");
1744 retval = -EIO;
1745 goto probe_exit0;
1746 }
1747
1748 icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
1749 icom_adapter->pci_dev = dev;
1750 icom_adapter->version = ent->driver_data;
1751 icom_adapter->subsystem_id = ent->subdevice;
1752
1753
1754 retval = icom_init_ports(icom_adapter);
1755 if (retval) {
1756 dev_err(&dev->dev, "Port configuration failed\n");
1757 goto probe_exit1;
1758 }
1759
1760 icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
1761
1762 if (!icom_adapter->base_addr) {
1763 retval = -ENOMEM;
1764 goto probe_exit1;
1765 }
1766
1767 /* save off irq and request irq line */
1768 retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter);
1769 if (retval) {
1770 goto probe_exit2;
1771 }
1772
1773 retval = icom_load_ports(icom_adapter);
1774
1775 for (index = 0; index < icom_adapter->numb_ports; index++) {
1776 icom_port = &icom_adapter->port_info[index];
1777
1778 if (icom_port->status == ICOM_PORT_ACTIVE) {
1779 icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq;
1780 icom_port->uart_port.type = PORT_ICOM;
1781 icom_port->uart_port.iotype = UPIO_MEM;
1782 icom_port->uart_port.membase =
1783 (unsigned char __iomem *)icom_adapter->base_addr_pci;
1784 icom_port->uart_port.fifosize = 16;
1785 icom_port->uart_port.ops = &icom_ops;
1786 icom_port->uart_port.line =
1787 icom_port->port + icom_adapter->index * 4;
1788 if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) {
1789 icom_port->status = ICOM_PORT_OFF;
1790 dev_err(&dev->dev, "Device add failed\n");
1791 } else
1792 dev_info(&dev->dev, "Device added\n");
1793 }
1794 }
1795
1796 kref_init(&icom_adapter->kref);
1797 return 0;
1798
1799 probe_exit2:
1800 iounmap(icom_adapter->base_addr);
1801 probe_exit1:
1802 icom_free_adapter(icom_adapter);
1803
1804 probe_exit0:
1805 pci_release_regions(dev);
1806 pci_disable_device(dev);
1807
1808 return retval;
1809 }
1810
1811 static void icom_remove(struct pci_dev *dev)
1812 {
1813 struct icom_adapter *icom_adapter;
1814
1815 list_for_each_entry(icom_adapter, &icom_adapter_head,
1816 icom_adapter_entry) {
1817 if (icom_adapter->pci_dev == dev) {
1818 kref_put(&icom_adapter->kref, icom_kref_release);
1819 return;
1820 }
1821 }
1822
1823 dev_err(&dev->dev, "Unable to find device to remove\n");
1824 }
1825
1826 static struct pci_driver icom_pci_driver = {
1827 .name = ICOM_DRIVER_NAME,
1828 .id_table = icom_pci_table,
1829 .probe = icom_probe,
1830 .remove = icom_remove,
1831 };
1832
1833 static int __init icom_init(void)
1834 {
1835 int ret;
1836
1837 ret = uart_register_driver(&icom_uart_driver);
1838 if (ret)
1839 return ret;
1840
1841 ret = pci_register_driver(&icom_pci_driver);
1842
1843 if (ret < 0)
1844 uart_unregister_driver(&icom_uart_driver);
1845
1846 return ret;
1847 }
1848
1849 static void __exit icom_exit(void)
1850 {
1851 pci_unregister_driver(&icom_pci_driver);
1852 uart_unregister_driver(&icom_uart_driver);
1853 }
1854
1855 module_init(icom_init);
1856 module_exit(icom_exit);
1857
1858 MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
1859 MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
1860 MODULE_LICENSE("GPL");
1861 MODULE_FIRMWARE("icom_call_setup.bin");
1862 MODULE_FIRMWARE("icom_res_dce.bin");
1863 MODULE_FIRMWARE("icom_asc.bin");
Kernel DRM miscellaneous fixes and cross-tree changes