drm/ast: Only warn about unsupported TX chips on Gen4 and later

[drm/drm-misc.git] / include / linux / devfreq.h

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * devfreq: Generic Dynamic Voltage and Frequency Scaling (DVFS) Framework
 *          for Non-CPU Devices.
 *
 * Copyright (C) 2011 Samsung Electronics
 *      MyungJoo Ham <myungjoo.ham@samsung.com>
 */

#ifndef __LINUX_DEVFREQ_H__
#define __LINUX_DEVFREQ_H__

#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/pm_opp.h>
#include <linux/pm_qos.h>

/* DEVFREQ governor name */
#define DEVFREQ_GOV_SIMPLE_ONDEMAND     "simple_ondemand"
#define DEVFREQ_GOV_PERFORMANCE         "performance"
#define DEVFREQ_GOV_POWERSAVE           "powersave"
#define DEVFREQ_GOV_USERSPACE           "userspace"
#define DEVFREQ_GOV_PASSIVE             "passive"

/* DEVFREQ notifier interface */
#define DEVFREQ_TRANSITION_NOTIFIER     (0)

/* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */
#define DEVFREQ_PRECHANGE               (0)
#define DEVFREQ_POSTCHANGE              (1)

/* DEVFREQ work timers */
enum devfreq_timer {
        DEVFREQ_TIMER_DEFERRABLE = 0,
        DEVFREQ_TIMER_DELAYED,
        DEVFREQ_TIMER_NUM,
};

struct devfreq;
struct devfreq_governor;
struct devfreq_cpu_data;
struct thermal_cooling_device;

/**
 * struct devfreq_dev_status - Data given from devfreq user device to
 *                           governors. Represents the performance
 *                           statistics.
 * @total_time:         The total time represented by this instance of
 *                      devfreq_dev_status
 * @busy_time:          The time that the device was working among the
 *                      total_time.
 * @current_frequency:  The operating frequency.
 * @private_data:       An entry not specified by the devfreq framework.
 *                      A device and a specific governor may have their
 *                      own protocol with private_data. However, because
 *                      this is governor-specific, a governor using this
 *                      will be only compatible with devices aware of it.
 */
struct devfreq_dev_status {
        /* both since the last measure */
        unsigned long total_time;
        unsigned long busy_time;
        unsigned long current_frequency;
        void *private_data;
};

/*
 * The resulting frequency should be at most this. (this bound is the
 * least upper bound; thus, the resulting freq should be lower or same)
 * If the flag is not set, the resulting frequency should be at most the
 * bound (greatest lower bound)
 */
#define DEVFREQ_FLAG_LEAST_UPPER_BOUND          0x1

/**
 * struct devfreq_dev_profile - Devfreq's user device profile
 * @initial_freq:       The operating frequency when devfreq_add_device() is
 *                      called.
 * @polling_ms:         The polling interval in ms. 0 disables polling.
 * @timer:              Timer type is either deferrable or delayed timer.
 * @target:             The device should set its operating frequency at
 *                      freq or lowest-upper-than-freq value. If freq is
 *                      higher than any operable frequency, set maximum.
 *                      Before returning, target function should set
 *                      freq at the current frequency.
 *                      The "flags" parameter's possible values are
 *                      explained above with "DEVFREQ_FLAG_*" macros.
 * @get_dev_status:     The device should provide the current performance
 *                      status to devfreq. Governors are recommended not to
 *                      use this directly. Instead, governors are recommended
 *                      to use devfreq_update_stats() along with
 *                      devfreq.last_status.
 * @get_cur_freq:       The device should provide the current frequency
 *                      at which it is operating.
 * @exit:               An optional callback that is called when devfreq
 *                      is removing the devfreq object due to error or
 *                      from devfreq_remove_device() call. If the user
 *                      has registered devfreq->nb at a notifier-head,
 *                      this is the time to unregister it.
 * @freq_table:         Optional list of frequencies to support statistics
 *                      and freq_table must be generated in ascending order.
 * @max_state:          The size of freq_table.
 *
 * @is_cooling_device: A self-explanatory boolean giving the device a
 *                     cooling effect property.
 */
struct devfreq_dev_profile {
        unsigned long initial_freq;
        unsigned int polling_ms;
        enum devfreq_timer timer;

        int (*target)(struct device *dev, unsigned long *freq, u32 flags);
        int (*get_dev_status)(struct device *dev,
                              struct devfreq_dev_status *stat);
        int (*get_cur_freq)(struct device *dev, unsigned long *freq);
        void (*exit)(struct device *dev);

        unsigned long *freq_table;
        unsigned int max_state;

        bool is_cooling_device;
};

/**
 * struct devfreq_stats - Statistics of devfreq device behavior
 * @total_trans:        Number of devfreq transitions.
 * @trans_table:        Statistics of devfreq transitions.
 * @time_in_state:      Statistics of devfreq states.
 * @last_update:        The last time stats were updated.
 */
struct devfreq_stats {
        unsigned int total_trans;
        unsigned int *trans_table;
        u64 *time_in_state;
        u64 last_update;
};

/**
 * struct devfreq - Device devfreq structure
 * @node:       list node - contains the devices with devfreq that have been
 *              registered.
 * @lock:       a mutex to protect accessing devfreq.
 * @dev:        device registered by devfreq class. dev.parent is the device
 *              using devfreq.
 * @profile:    device-specific devfreq profile
 * @governor:   method how to choose frequency based on the usage.
 * @opp_table:  Reference to OPP table of dev.parent, if one exists.
 * @nb:         notifier block used to notify devfreq object that it should
 *              reevaluate operable frequencies. Devfreq users may use
 *              devfreq.nb to the corresponding register notifier call chain.
 * @work:       delayed work for load monitoring.
 * @freq_table:         current frequency table used by the devfreq driver.
 * @max_state:          count of entry present in the frequency table.
 * @previous_freq:      previously configured frequency value.
 * @last_status:        devfreq user device info, performance statistics
 * @data:       devfreq driver pass to governors, governor should not change it.
 * @governor_data:      private data for governors, devfreq core doesn't touch it.
 * @user_min_freq_req:  PM QoS minimum frequency request from user (via sysfs)
 * @user_max_freq_req:  PM QoS maximum frequency request from user (via sysfs)
 * @scaling_min_freq:   Limit minimum frequency requested by OPP interface
 * @scaling_max_freq:   Limit maximum frequency requested by OPP interface
 * @stop_polling:        devfreq polling status of a device.
 * @suspend_freq:        frequency of a device set during suspend phase.
 * @resume_freq:         frequency of a device set in resume phase.
 * @suspend_count:       suspend requests counter for a device.
 * @stats:      Statistics of devfreq device behavior
 * @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier
 * @cdev:       Cooling device pointer if the devfreq has cooling property
 * @nb_min:             Notifier block for DEV_PM_QOS_MIN_FREQUENCY
 * @nb_max:             Notifier block for DEV_PM_QOS_MAX_FREQUENCY
 *
 * This structure stores the devfreq information for a given device.
 *
 * Note that when a governor accesses entries in struct devfreq in its
 * functions except for the context of callbacks defined in struct
 * devfreq_governor, the governor should protect its access with the
 * struct mutex lock in struct devfreq. A governor may use this mutex
 * to protect its own private data in ``void *data`` as well.
 */
struct devfreq {
        struct list_head node;

        struct mutex lock;
        struct device dev;
        struct devfreq_dev_profile *profile;
        const struct devfreq_governor *governor;
        struct opp_table *opp_table;
        struct notifier_block nb;
        struct delayed_work work;

        unsigned long *freq_table;
        unsigned int max_state;

        unsigned long previous_freq;
        struct devfreq_dev_status last_status;

        void *data;
        void *governor_data;

        struct dev_pm_qos_request user_min_freq_req;
        struct dev_pm_qos_request user_max_freq_req;
        unsigned long scaling_min_freq;
        unsigned long scaling_max_freq;
        bool stop_polling;

        unsigned long suspend_freq;
        unsigned long resume_freq;
        atomic_t suspend_count;

        /* information for device frequency transitions */
        struct devfreq_stats stats;

        struct srcu_notifier_head transition_notifier_list;

        /* Pointer to the cooling device if used for thermal mitigation */
        struct thermal_cooling_device *cdev;

        struct notifier_block nb_min;
        struct notifier_block nb_max;
};

struct devfreq_freqs {
        unsigned long old;
        unsigned long new;
};

#if defined(CONFIG_PM_DEVFREQ)
struct devfreq *devfreq_add_device(struct device *dev,
                                struct devfreq_dev_profile *profile,
                                const char *governor_name,
                                void *data);
int devfreq_remove_device(struct devfreq *devfreq);
struct devfreq *devm_devfreq_add_device(struct device *dev,
                                struct devfreq_dev_profile *profile,
                                const char *governor_name,
                                void *data);
void devm_devfreq_remove_device(struct device *dev, struct devfreq *devfreq);

/* Supposed to be called by PM callbacks */
int devfreq_suspend_device(struct devfreq *devfreq);
int devfreq_resume_device(struct devfreq *devfreq);

void devfreq_suspend(void);
void devfreq_resume(void);

/* update_devfreq() - Reevaluate the device and configure frequency */
int update_devfreq(struct devfreq *devfreq);

/* Helper functions for devfreq user device driver with OPP. */
struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
                                unsigned long *freq, u32 flags);
int devfreq_register_opp_notifier(struct device *dev,
                                struct devfreq *devfreq);
int devfreq_unregister_opp_notifier(struct device *dev,
                                struct devfreq *devfreq);
int devm_devfreq_register_opp_notifier(struct device *dev,
                                struct devfreq *devfreq);
void devm_devfreq_unregister_opp_notifier(struct device *dev,
                                struct devfreq *devfreq);
int devfreq_register_notifier(struct devfreq *devfreq,
                                struct notifier_block *nb,
                                unsigned int list);
int devfreq_unregister_notifier(struct devfreq *devfreq,
                                struct notifier_block *nb,
                                unsigned int list);
int devm_devfreq_register_notifier(struct device *dev,
                                struct devfreq *devfreq,
                                struct notifier_block *nb,
                                unsigned int list);
void devm_devfreq_unregister_notifier(struct device *dev,
                                struct devfreq *devfreq,
                                struct notifier_block *nb,
                                unsigned int list);
struct devfreq *devfreq_get_devfreq_by_node(struct device_node *node);
struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
                                const char *phandle_name, int index);
#endif /* CONFIG_PM_DEVFREQ */

/**
 * struct devfreq_simple_ondemand_data - ``void *data`` fed to struct devfreq
 *      and devfreq_add_device
 * @upthreshold:        If the load is over this value, the frequency jumps.
 *                      Specify 0 to use the default. Valid value = 0 to 100.
 * @downdifferential:   If the load is under upthreshold - downdifferential,
 *                      the governor may consider slowing the frequency down.
 *                      Specify 0 to use the default. Valid value = 0 to 100.
 *                      downdifferential < upthreshold must hold.
 *
 * If the fed devfreq_simple_ondemand_data pointer is NULL to the governor,
 * the governor uses the default values.
 */
struct devfreq_simple_ondemand_data {
        unsigned int upthreshold;
        unsigned int downdifferential;
};

enum devfreq_parent_dev_type {
        DEVFREQ_PARENT_DEV,
        CPUFREQ_PARENT_DEV,
};

/**
 * struct devfreq_passive_data - ``void *data`` fed to struct devfreq
 *      and devfreq_add_device
 * @parent:     the devfreq instance of parent device.
 * @get_target_freq:    Optional callback, Returns desired operating frequency
 *                      for the device using passive governor. That is called
 *                      when passive governor should decide the next frequency
 *                      by using the new frequency of parent devfreq device
 *                      using governors except for passive governor.
 *                      If the devfreq device has the specific method to decide
 *                      the next frequency, should use this callback.
 * @parent_type:        the parent type of the device.
 * @this:               the devfreq instance of own device.
 * @nb:                 the notifier block for DEVFREQ_TRANSITION_NOTIFIER or
 *                      CPUFREQ_TRANSITION_NOTIFIER list.
 * @cpu_data_list:      the list of cpu frequency data for all cpufreq_policy.
 *
 * The devfreq_passive_data have to set the devfreq instance of parent
 * device with governors except for the passive governor. But, don't need to
 * initialize the 'this' and 'nb' field because the devfreq core will handle
 * them.
 */
struct devfreq_passive_data {
        /* Should set the devfreq instance of parent device */
        struct devfreq *parent;

        /* Optional callback to decide the next frequency of passvice device */
        int (*get_target_freq)(struct devfreq *this, unsigned long *freq);

        /* Should set the type of parent device */
        enum devfreq_parent_dev_type parent_type;

        /* For passive governor's internal use. Don't need to set them */
        struct devfreq *this;
        struct notifier_block nb;
        struct list_head cpu_data_list;
};

#if !defined(CONFIG_PM_DEVFREQ)
static inline struct devfreq *devfreq_add_device(struct device *dev,
                                        struct devfreq_dev_profile *profile,
                                        const char *governor_name,
                                        void *data)
{
        return ERR_PTR(-ENOSYS);
}

static inline int devfreq_remove_device(struct devfreq *devfreq)
{
        return 0;
}

static inline struct devfreq *devm_devfreq_add_device(struct device *dev,
                                        struct devfreq_dev_profile *profile,
                                        const char *governor_name,
                                        void *data)
{
        return ERR_PTR(-ENOSYS);
}

static inline void devm_devfreq_remove_device(struct device *dev,
                                        struct devfreq *devfreq)
{
}

static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
        return 0;
}

static inline int devfreq_resume_device(struct devfreq *devfreq)
{
        return 0;
}

static inline void devfreq_suspend(void) {}
static inline void devfreq_resume(void) {}

static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev,
                                        unsigned long *freq, u32 flags)
{
        return ERR_PTR(-EINVAL);
}

static inline int devfreq_register_opp_notifier(struct device *dev,
                                        struct devfreq *devfreq)
{
        return -EINVAL;
}

static inline int devfreq_unregister_opp_notifier(struct device *dev,
                                        struct devfreq *devfreq)
{
        return -EINVAL;
}

static inline int devm_devfreq_register_opp_notifier(struct device *dev,
                                        struct devfreq *devfreq)
{
        return -EINVAL;
}

static inline void devm_devfreq_unregister_opp_notifier(struct device *dev,
                                        struct devfreq *devfreq)
{
}

static inline int devfreq_register_notifier(struct devfreq *devfreq,
                                        struct notifier_block *nb,
                                        unsigned int list)
{
        return 0;
}

static inline int devfreq_unregister_notifier(struct devfreq *devfreq,
                                        struct notifier_block *nb,
                                        unsigned int list)
{
        return 0;
}

static inline int devm_devfreq_register_notifier(struct device *dev,
                                        struct devfreq *devfreq,
                                        struct notifier_block *nb,
                                        unsigned int list)
{
        return 0;
}

static inline void devm_devfreq_unregister_notifier(struct device *dev,
                                        struct devfreq *devfreq,
                                        struct notifier_block *nb,
                                        unsigned int list)
{
}

static inline struct devfreq *devfreq_get_devfreq_by_node(struct device_node *node)
{
        return ERR_PTR(-ENODEV);
}

static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
                                        const char *phandle_name, int index)
{
        return ERR_PTR(-ENODEV);
}

static inline int devfreq_update_stats(struct devfreq *df)
{
        return -EINVAL;
}
#endif /* CONFIG_PM_DEVFREQ */

#endif /* __LINUX_DEVFREQ_H__ */