accel/ivpu: Enable HWS by default on all platforms
[drm/drm-misc.git] / include / rdma / rdmavt_qp.h
blobd678929441933bca92ba0b8acb1f23a205a9ab2a
1 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
2 /*
3 * Copyright(c) 2016 - 2020 Intel Corporation.
4 */
6 #ifndef DEF_RDMAVT_INCQP_H
7 #define DEF_RDMAVT_INCQP_H
9 #include <rdma/rdma_vt.h>
10 #include <rdma/ib_pack.h>
11 #include <rdma/ib_verbs.h>
12 #include <rdma/rdmavt_cq.h>
13 #include <rdma/rvt-abi.h>
14 #include <linux/vmalloc.h>
16 * Atomic bit definitions for r_aflags.
18 #define RVT_R_WRID_VALID 0
19 #define RVT_R_REWIND_SGE 1
22 * Bit definitions for r_flags.
24 #define RVT_R_REUSE_SGE 0x01
25 #define RVT_R_RDMAR_SEQ 0x02
26 #define RVT_R_RSP_NAK 0x04
27 #define RVT_R_RSP_SEND 0x08
28 #define RVT_R_COMM_EST 0x10
31 * If a packet's QP[23:16] bits match this value, then it is
32 * a PSM packet and the hardware will expect a KDETH header
33 * following the BTH.
35 #define RVT_KDETH_QP_PREFIX 0x80
36 #define RVT_KDETH_QP_SUFFIX 0xffff
37 #define RVT_KDETH_QP_PREFIX_MASK 0x00ff0000
38 #define RVT_KDETH_QP_PREFIX_SHIFT 16
39 #define RVT_KDETH_QP_BASE (u32)(RVT_KDETH_QP_PREFIX << \
40 RVT_KDETH_QP_PREFIX_SHIFT)
41 #define RVT_KDETH_QP_MAX (u32)(RVT_KDETH_QP_BASE + RVT_KDETH_QP_SUFFIX)
44 * If a packet's LNH == BTH and DEST QPN[23:16] in the BTH match this
45 * prefix value, then it is an AIP packet with a DETH containing the entropy
46 * value in byte 4 following the BTH.
48 #define RVT_AIP_QP_PREFIX 0x81
49 #define RVT_AIP_QP_SUFFIX 0xffff
50 #define RVT_AIP_QP_PREFIX_MASK 0x00ff0000
51 #define RVT_AIP_QP_PREFIX_SHIFT 16
52 #define RVT_AIP_QP_BASE (u32)(RVT_AIP_QP_PREFIX << \
53 RVT_AIP_QP_PREFIX_SHIFT)
54 #define RVT_AIP_QPN_MAX BIT(RVT_AIP_QP_PREFIX_SHIFT)
55 #define RVT_AIP_QP_MAX (u32)(RVT_AIP_QP_BASE + RVT_AIP_QPN_MAX - 1)
58 * Bit definitions for s_flags.
60 * RVT_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled
61 * RVT_S_BUSY - send tasklet is processing the QP
62 * RVT_S_TIMER - the RC retry timer is active
63 * RVT_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics
64 * RVT_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs
65 * before processing the next SWQE
66 * RVT_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete
67 * before processing the next SWQE
68 * RVT_S_WAIT_RNR - waiting for RNR timeout
69 * RVT_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
70 * RVT_S_WAIT_DMA - waiting for send DMA queue to drain before generating
71 * next send completion entry not via send DMA
72 * RVT_S_WAIT_PIO - waiting for a send buffer to be available
73 * RVT_S_WAIT_TX - waiting for a struct verbs_txreq to be available
74 * RVT_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available
75 * RVT_S_WAIT_KMEM - waiting for kernel memory to be available
76 * RVT_S_WAIT_PSN - waiting for a packet to exit the send DMA queue
77 * RVT_S_WAIT_ACK - waiting for an ACK packet before sending more requests
78 * RVT_S_SEND_ONE - send one packet, request ACK, then wait for ACK
79 * RVT_S_ECN - a BECN was queued to the send engine
80 * RVT_S_MAX_BIT_MASK - The max bit that can be used by rdmavt
82 #define RVT_S_SIGNAL_REQ_WR 0x0001
83 #define RVT_S_BUSY 0x0002
84 #define RVT_S_TIMER 0x0004
85 #define RVT_S_RESP_PENDING 0x0008
86 #define RVT_S_ACK_PENDING 0x0010
87 #define RVT_S_WAIT_FENCE 0x0020
88 #define RVT_S_WAIT_RDMAR 0x0040
89 #define RVT_S_WAIT_RNR 0x0080
90 #define RVT_S_WAIT_SSN_CREDIT 0x0100
91 #define RVT_S_WAIT_DMA 0x0200
92 #define RVT_S_WAIT_PIO 0x0400
93 #define RVT_S_WAIT_TX 0x0800
94 #define RVT_S_WAIT_DMA_DESC 0x1000
95 #define RVT_S_WAIT_KMEM 0x2000
96 #define RVT_S_WAIT_PSN 0x4000
97 #define RVT_S_WAIT_ACK 0x8000
98 #define RVT_S_SEND_ONE 0x10000
99 #define RVT_S_UNLIMITED_CREDIT 0x20000
100 #define RVT_S_ECN 0x40000
101 #define RVT_S_MAX_BIT_MASK 0x800000
104 * Drivers should use s_flags starting with bit 31 down to the bit next to
105 * RVT_S_MAX_BIT_MASK
109 * Wait flags that would prevent any packet type from being sent.
111 #define RVT_S_ANY_WAIT_IO \
112 (RVT_S_WAIT_PIO | RVT_S_WAIT_TX | \
113 RVT_S_WAIT_DMA_DESC | RVT_S_WAIT_KMEM)
116 * Wait flags that would prevent send work requests from making progress.
118 #define RVT_S_ANY_WAIT_SEND (RVT_S_WAIT_FENCE | RVT_S_WAIT_RDMAR | \
119 RVT_S_WAIT_RNR | RVT_S_WAIT_SSN_CREDIT | RVT_S_WAIT_DMA | \
120 RVT_S_WAIT_PSN | RVT_S_WAIT_ACK)
122 #define RVT_S_ANY_WAIT (RVT_S_ANY_WAIT_IO | RVT_S_ANY_WAIT_SEND)
124 /* Number of bits to pay attention to in the opcode for checking qp type */
125 #define RVT_OPCODE_QP_MASK 0xE0
127 /* Flags for checking QP state (see ib_rvt_state_ops[]) */
128 #define RVT_POST_SEND_OK 0x01
129 #define RVT_POST_RECV_OK 0x02
130 #define RVT_PROCESS_RECV_OK 0x04
131 #define RVT_PROCESS_SEND_OK 0x08
132 #define RVT_PROCESS_NEXT_SEND_OK 0x10
133 #define RVT_FLUSH_SEND 0x20
134 #define RVT_FLUSH_RECV 0x40
135 #define RVT_PROCESS_OR_FLUSH_SEND \
136 (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND)
137 #define RVT_SEND_OR_FLUSH_OR_RECV_OK \
138 (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND | RVT_PROCESS_RECV_OK)
141 * Internal send flags
143 #define RVT_SEND_RESERVE_USED IB_SEND_RESERVED_START
144 #define RVT_SEND_COMPLETION_ONLY (IB_SEND_RESERVED_START << 1)
147 * rvt_ud_wr - IB UD work plus AH cache
148 * @wr: valid IB work request
149 * @attr: pointer to an allocated AH attribute
151 * Special case the UD WR so we can keep track of the AH attributes.
153 * NOTE: This data structure is stricly ordered wr then attr. I.e the attr
154 * MUST come after wr. The ib_ud_wr is sized and copied in rvt_post_one_wr.
155 * The copy assumes that wr is first.
157 struct rvt_ud_wr {
158 struct ib_ud_wr wr;
159 struct rdma_ah_attr *attr;
163 * Send work request queue entry.
164 * The size of the sg_list is determined when the QP is created and stored
165 * in qp->s_max_sge.
167 struct rvt_swqe {
168 union {
169 struct ib_send_wr wr; /* don't use wr.sg_list */
170 struct rvt_ud_wr ud_wr;
171 struct ib_reg_wr reg_wr;
172 struct ib_rdma_wr rdma_wr;
173 struct ib_atomic_wr atomic_wr;
175 u32 psn; /* first packet sequence number */
176 u32 lpsn; /* last packet sequence number */
177 u32 ssn; /* send sequence number */
178 u32 length; /* total length of data in sg_list */
179 void *priv; /* driver dependent field */
180 struct rvt_sge sg_list[];
184 * struct rvt_krwq - kernel struct receive work request
185 * @p_lock: lock to protect producer of the kernel buffer
186 * @head: index of next entry to fill
187 * @c_lock:lock to protect consumer of the kernel buffer
188 * @tail: index of next entry to pull
189 * @count: count is aproximate of total receive enteries posted
190 * @rvt_rwqe: struct of receive work request queue entry
192 * This structure is used to contain the head pointer,
193 * tail pointer and receive work queue entries for kernel
194 * mode user.
196 struct rvt_krwq {
197 spinlock_t p_lock; /* protect producer */
198 u32 head; /* new work requests posted to the head */
200 /* protect consumer */
201 spinlock_t c_lock ____cacheline_aligned_in_smp;
202 u32 tail; /* receives pull requests from here. */
203 u32 count; /* approx count of receive entries posted */
204 struct rvt_rwqe *curr_wq;
205 struct rvt_rwqe wq[];
209 * rvt_get_swqe_ah - Return the pointer to the struct rvt_ah
210 * @swqe: valid Send WQE
213 static inline struct rvt_ah *rvt_get_swqe_ah(struct rvt_swqe *swqe)
215 return ibah_to_rvtah(swqe->ud_wr.wr.ah);
219 * rvt_get_swqe_ah_attr - Return the cached ah attribute information
220 * @swqe: valid Send WQE
223 static inline struct rdma_ah_attr *rvt_get_swqe_ah_attr(struct rvt_swqe *swqe)
225 return swqe->ud_wr.attr;
229 * rvt_get_swqe_remote_qpn - Access the remote QPN value
230 * @swqe: valid Send WQE
233 static inline u32 rvt_get_swqe_remote_qpn(struct rvt_swqe *swqe)
235 return swqe->ud_wr.wr.remote_qpn;
239 * rvt_get_swqe_remote_qkey - Acces the remote qkey value
240 * @swqe: valid Send WQE
243 static inline u32 rvt_get_swqe_remote_qkey(struct rvt_swqe *swqe)
245 return swqe->ud_wr.wr.remote_qkey;
249 * rvt_get_swqe_pkey_index - Access the pkey index
250 * @swqe: valid Send WQE
253 static inline u16 rvt_get_swqe_pkey_index(struct rvt_swqe *swqe)
255 return swqe->ud_wr.wr.pkey_index;
258 struct rvt_rq {
259 struct rvt_rwq *wq;
260 struct rvt_krwq *kwq;
261 u32 size; /* size of RWQE array */
262 u8 max_sge;
263 /* protect changes in this struct */
264 spinlock_t lock ____cacheline_aligned_in_smp;
268 * rvt_get_rq_count - count numbers of request work queue entries
269 * in circular buffer
270 * @rq: data structure for request queue entry
271 * @head: head indices of the circular buffer
272 * @tail: tail indices of the circular buffer
274 * Return - total number of entries in the Receive Queue
277 static inline u32 rvt_get_rq_count(struct rvt_rq *rq, u32 head, u32 tail)
279 u32 count = head - tail;
281 if ((s32)count < 0)
282 count += rq->size;
283 return count;
287 * This structure holds the information that the send tasklet needs
288 * to send a RDMA read response or atomic operation.
290 struct rvt_ack_entry {
291 struct rvt_sge rdma_sge;
292 u64 atomic_data;
293 u32 psn;
294 u32 lpsn;
295 u8 opcode;
296 u8 sent;
297 void *priv;
300 #define RC_QP_SCALING_INTERVAL 5
302 #define RVT_OPERATION_PRIV 0x00000001
303 #define RVT_OPERATION_ATOMIC 0x00000002
304 #define RVT_OPERATION_ATOMIC_SGE 0x00000004
305 #define RVT_OPERATION_LOCAL 0x00000008
306 #define RVT_OPERATION_USE_RESERVE 0x00000010
307 #define RVT_OPERATION_IGN_RNR_CNT 0x00000020
309 #define RVT_OPERATION_MAX (IB_WR_RESERVED10 + 1)
312 * rvt_operation_params - op table entry
313 * @length - the length to copy into the swqe entry
314 * @qpt_support - a bit mask indicating QP type support
315 * @flags - RVT_OPERATION flags (see above)
317 * This supports table driven post send so that
318 * the driver can have differing an potentially
319 * different sets of operations.
323 struct rvt_operation_params {
324 size_t length;
325 u32 qpt_support;
326 u32 flags;
330 * Common variables are protected by both r_rq.lock and s_lock in that order
331 * which only happens in modify_qp() or changing the QP 'state'.
333 struct rvt_qp {
334 struct ib_qp ibqp;
335 void *priv; /* Driver private data */
336 /* read mostly fields above and below */
337 struct rdma_ah_attr remote_ah_attr;
338 struct rdma_ah_attr alt_ah_attr;
339 struct rvt_qp __rcu *next; /* link list for QPN hash table */
340 struct rvt_swqe *s_wq; /* send work queue */
341 struct rvt_mmap_info *ip;
343 unsigned long timeout_jiffies; /* computed from timeout */
345 int srate_mbps; /* s_srate (below) converted to Mbit/s */
346 pid_t pid; /* pid for user mode QPs */
347 u32 remote_qpn;
348 u32 qkey; /* QKEY for this QP (for UD or RD) */
349 u32 s_size; /* send work queue size */
351 u16 pmtu; /* decoded from path_mtu */
352 u8 log_pmtu; /* shift for pmtu */
353 u8 state; /* QP state */
354 u8 allowed_ops; /* high order bits of allowed opcodes */
355 u8 qp_access_flags;
356 u8 alt_timeout; /* Alternate path timeout for this QP */
357 u8 timeout; /* Timeout for this QP */
358 u8 s_srate;
359 u8 s_mig_state;
360 u8 port_num;
361 u8 s_pkey_index; /* PKEY index to use */
362 u8 s_alt_pkey_index; /* Alternate path PKEY index to use */
363 u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
364 u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
365 u8 s_retry_cnt; /* number of times to retry */
366 u8 s_rnr_retry_cnt;
367 u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
368 u8 s_max_sge; /* size of s_wq->sg_list */
369 u8 s_draining;
371 /* start of read/write fields */
372 atomic_t refcount ____cacheline_aligned_in_smp;
373 wait_queue_head_t wait;
375 struct rvt_ack_entry *s_ack_queue;
376 struct rvt_sge_state s_rdma_read_sge;
378 spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */
379 u32 r_psn; /* expected rcv packet sequence number */
380 unsigned long r_aflags;
381 u64 r_wr_id; /* ID for current receive WQE */
382 u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
383 u32 r_len; /* total length of r_sge */
384 u32 r_rcv_len; /* receive data len processed */
385 u32 r_msn; /* message sequence number */
387 u8 r_state; /* opcode of last packet received */
388 u8 r_flags;
389 u8 r_head_ack_queue; /* index into s_ack_queue[] */
390 u8 r_adefered; /* defered ack count */
392 struct list_head rspwait; /* link for waiting to respond */
394 struct rvt_sge_state r_sge; /* current receive data */
395 struct rvt_rq r_rq; /* receive work queue */
397 /* post send line */
398 spinlock_t s_hlock ____cacheline_aligned_in_smp;
399 u32 s_head; /* new entries added here */
400 u32 s_next_psn; /* PSN for next request */
401 u32 s_avail; /* number of entries avail */
402 u32 s_ssn; /* SSN of tail entry */
403 atomic_t s_reserved_used; /* reserved entries in use */
405 spinlock_t s_lock ____cacheline_aligned_in_smp;
406 u32 s_flags;
407 struct rvt_sge_state *s_cur_sge;
408 struct rvt_swqe *s_wqe;
409 struct rvt_sge_state s_sge; /* current send request data */
410 struct rvt_mregion *s_rdma_mr;
411 u32 s_len; /* total length of s_sge */
412 u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
413 u32 s_last_psn; /* last response PSN processed */
414 u32 s_sending_psn; /* lowest PSN that is being sent */
415 u32 s_sending_hpsn; /* highest PSN that is being sent */
416 u32 s_psn; /* current packet sequence number */
417 u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */
418 u32 s_ack_psn; /* PSN for acking sends and RDMA writes */
419 u32 s_tail; /* next entry to process */
420 u32 s_cur; /* current work queue entry */
421 u32 s_acked; /* last un-ACK'ed entry */
422 u32 s_last; /* last completed entry */
423 u32 s_lsn; /* limit sequence number (credit) */
424 u32 s_ahgpsn; /* set to the psn in the copy of the header */
425 u16 s_cur_size; /* size of send packet in bytes */
426 u16 s_rdma_ack_cnt;
427 u8 s_hdrwords; /* size of s_hdr in 32 bit words */
428 s8 s_ahgidx;
429 u8 s_state; /* opcode of last packet sent */
430 u8 s_ack_state; /* opcode of packet to ACK */
431 u8 s_nak_state; /* non-zero if NAK is pending */
432 u8 r_nak_state; /* non-zero if NAK is pending */
433 u8 s_retry; /* requester retry counter */
434 u8 s_rnr_retry; /* requester RNR retry counter */
435 u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
436 u8 s_tail_ack_queue; /* index into s_ack_queue[] */
437 u8 s_acked_ack_queue; /* index into s_ack_queue[] */
439 struct rvt_sge_state s_ack_rdma_sge;
440 struct timer_list s_timer;
441 struct hrtimer s_rnr_timer;
443 atomic_t local_ops_pending; /* number of fast_reg/local_inv reqs */
446 * This sge list MUST be last. Do not add anything below here.
448 struct rvt_sge *r_sg_list /* verified SGEs */
449 ____cacheline_aligned_in_smp;
452 struct rvt_srq {
453 struct ib_srq ibsrq;
454 struct rvt_rq rq;
455 struct rvt_mmap_info *ip;
456 /* send signal when number of RWQEs < limit */
457 u32 limit;
460 static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq)
462 return container_of(ibsrq, struct rvt_srq, ibsrq);
465 static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp)
467 return container_of(ibqp, struct rvt_qp, ibqp);
470 #define RVT_QPN_MAX BIT(24)
471 #define RVT_QPNMAP_ENTRIES (RVT_QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
472 #define RVT_BITS_PER_PAGE (PAGE_SIZE * BITS_PER_BYTE)
473 #define RVT_BITS_PER_PAGE_MASK (RVT_BITS_PER_PAGE - 1)
474 #define RVT_QPN_MASK IB_QPN_MASK
477 * QPN-map pages start out as NULL, they get allocated upon
478 * first use and are never deallocated. This way,
479 * large bitmaps are not allocated unless large numbers of QPs are used.
481 struct rvt_qpn_map {
482 void *page;
485 struct rvt_qpn_table {
486 spinlock_t lock; /* protect changes to the qp table */
487 unsigned flags; /* flags for QP0/1 allocated for each port */
488 u32 last; /* last QP number allocated */
489 u32 nmaps; /* size of the map table */
490 u16 limit;
491 u8 incr;
492 /* bit map of free QP numbers other than 0/1 */
493 struct rvt_qpn_map map[RVT_QPNMAP_ENTRIES];
496 struct rvt_qp_ibdev {
497 u32 qp_table_size;
498 u32 qp_table_bits;
499 struct rvt_qp __rcu **qp_table;
500 spinlock_t qpt_lock; /* qptable lock */
501 struct rvt_qpn_table qpn_table;
505 * There is one struct rvt_mcast for each multicast GID.
506 * All attached QPs are then stored as a list of
507 * struct rvt_mcast_qp.
509 struct rvt_mcast_qp {
510 struct list_head list;
511 struct rvt_qp *qp;
514 struct rvt_mcast_addr {
515 union ib_gid mgid;
516 u16 lid;
519 struct rvt_mcast {
520 struct rb_node rb_node;
521 struct rvt_mcast_addr mcast_addr;
522 struct list_head qp_list;
523 wait_queue_head_t wait;
524 atomic_t refcount;
525 int n_attached;
529 * Since struct rvt_swqe is not a fixed size, we can't simply index into
530 * struct rvt_qp.s_wq. This function does the array index computation.
532 static inline struct rvt_swqe *rvt_get_swqe_ptr(struct rvt_qp *qp,
533 unsigned n)
535 return (struct rvt_swqe *)((char *)qp->s_wq +
536 (sizeof(struct rvt_swqe) +
537 qp->s_max_sge *
538 sizeof(struct rvt_sge)) * n);
542 * Since struct rvt_rwqe is not a fixed size, we can't simply index into
543 * struct rvt_rwq.wq. This function does the array index computation.
545 static inline struct rvt_rwqe *rvt_get_rwqe_ptr(struct rvt_rq *rq, unsigned n)
547 return (struct rvt_rwqe *)
548 ((char *)rq->kwq->curr_wq +
549 (sizeof(struct rvt_rwqe) +
550 rq->max_sge * sizeof(struct ib_sge)) * n);
554 * rvt_is_user_qp - return if this is user mode QP
555 * @qp - the target QP
557 static inline bool rvt_is_user_qp(struct rvt_qp *qp)
559 return !!qp->pid;
563 * rvt_get_qp - get a QP reference
564 * @qp - the QP to hold
566 static inline void rvt_get_qp(struct rvt_qp *qp)
568 atomic_inc(&qp->refcount);
572 * rvt_put_qp - release a QP reference
573 * @qp - the QP to release
575 static inline void rvt_put_qp(struct rvt_qp *qp)
577 if (qp && atomic_dec_and_test(&qp->refcount))
578 wake_up(&qp->wait);
582 * rvt_put_swqe - drop mr refs held by swqe
583 * @wqe - the send wqe
585 * This drops any mr references held by the swqe
587 static inline void rvt_put_swqe(struct rvt_swqe *wqe)
589 int i;
591 for (i = 0; i < wqe->wr.num_sge; i++) {
592 struct rvt_sge *sge = &wqe->sg_list[i];
594 rvt_put_mr(sge->mr);
599 * rvt_qp_wqe_reserve - reserve operation
600 * @qp - the rvt qp
601 * @wqe - the send wqe
603 * This routine used in post send to record
604 * a wqe relative reserved operation use.
606 static inline void rvt_qp_wqe_reserve(
607 struct rvt_qp *qp,
608 struct rvt_swqe *wqe)
610 atomic_inc(&qp->s_reserved_used);
614 * rvt_qp_wqe_unreserve - clean reserved operation
615 * @qp - the rvt qp
616 * @flags - send wqe flags
618 * This decrements the reserve use count.
620 * This call MUST precede the change to
621 * s_last to insure that post send sees a stable
622 * s_avail.
624 * An smp_mp__after_atomic() is used to insure
625 * the compiler does not juggle the order of the s_last
626 * ring index and the decrementing of s_reserved_used.
628 static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags)
630 if (unlikely(flags & RVT_SEND_RESERVE_USED)) {
631 atomic_dec(&qp->s_reserved_used);
632 /* insure no compiler re-order up to s_last change */
633 smp_mb__after_atomic();
637 extern const enum ib_wc_opcode ib_rvt_wc_opcode[];
640 * Compare the lower 24 bits of the msn values.
641 * Returns an integer <, ==, or > than zero.
643 static inline int rvt_cmp_msn(u32 a, u32 b)
645 return (((int)a) - ((int)b)) << 8;
648 __be32 rvt_compute_aeth(struct rvt_qp *qp);
650 void rvt_get_credit(struct rvt_qp *qp, u32 aeth);
652 u32 rvt_restart_sge(struct rvt_sge_state *ss, struct rvt_swqe *wqe, u32 len);
655 * rvt_div_round_up_mtu - round up divide
656 * @qp - the qp pair
657 * @len - the length
659 * Perform a shift based mtu round up divide
661 static inline u32 rvt_div_round_up_mtu(struct rvt_qp *qp, u32 len)
663 return (len + qp->pmtu - 1) >> qp->log_pmtu;
667 * @qp - the qp pair
668 * @len - the length
670 * Perform a shift based mtu divide
672 static inline u32 rvt_div_mtu(struct rvt_qp *qp, u32 len)
674 return len >> qp->log_pmtu;
678 * rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies
679 * @timeout - timeout input(0 - 31).
681 * Return a timeout value in jiffies.
683 static inline unsigned long rvt_timeout_to_jiffies(u8 timeout)
685 if (timeout > 31)
686 timeout = 31;
688 return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL;
692 * rvt_lookup_qpn - return the QP with the given QPN
693 * @ibp: the ibport
694 * @qpn: the QP number to look up
696 * The caller must hold the rcu_read_lock(), and keep the lock until
697 * the returned qp is no longer in use.
699 static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi,
700 struct rvt_ibport *rvp,
701 u32 qpn) __must_hold(RCU)
703 struct rvt_qp *qp = NULL;
705 if (unlikely(qpn <= 1)) {
706 qp = rcu_dereference(rvp->qp[qpn]);
707 } else {
708 u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits);
710 for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp;
711 qp = rcu_dereference(qp->next))
712 if (qp->ibqp.qp_num == qpn)
713 break;
715 return qp;
719 * rvt_mod_retry_timer - mod a retry timer
720 * @qp - the QP
721 * @shift - timeout shift to wait for multiple packets
722 * Modify a potentially already running retry timer
724 static inline void rvt_mod_retry_timer_ext(struct rvt_qp *qp, u8 shift)
726 struct ib_qp *ibqp = &qp->ibqp;
727 struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
729 lockdep_assert_held(&qp->s_lock);
730 qp->s_flags |= RVT_S_TIMER;
731 /* 4.096 usec. * (1 << qp->timeout) */
732 mod_timer(&qp->s_timer, jiffies + rdi->busy_jiffies +
733 (qp->timeout_jiffies << shift));
736 static inline void rvt_mod_retry_timer(struct rvt_qp *qp)
738 return rvt_mod_retry_timer_ext(qp, 0);
742 * rvt_put_qp_swqe - drop refs held by swqe
743 * @qp: the send qp
744 * @wqe: the send wqe
746 * This drops any references held by the swqe
748 static inline void rvt_put_qp_swqe(struct rvt_qp *qp, struct rvt_swqe *wqe)
750 rvt_put_swqe(wqe);
751 if (qp->allowed_ops == IB_OPCODE_UD)
752 rdma_destroy_ah_attr(wqe->ud_wr.attr);
756 * rvt_qp_sqwe_incr - increment ring index
757 * @qp: the qp
758 * @val: the starting value
760 * Return: the new value wrapping as appropriate
762 static inline u32
763 rvt_qp_swqe_incr(struct rvt_qp *qp, u32 val)
765 if (++val >= qp->s_size)
766 val = 0;
767 return val;
770 int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err);
773 * rvt_recv_cq - add a new entry to completion queue
774 * by receive queue
775 * @qp: receive queue
776 * @wc: work completion entry to add
777 * @solicited: true if @entry is solicited
779 * This is wrapper function for rvt_enter_cq function call by
780 * receive queue. If rvt_cq_enter return false, it means cq is
781 * full and the qp is put into error state.
783 static inline void rvt_recv_cq(struct rvt_qp *qp, struct ib_wc *wc,
784 bool solicited)
786 struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.recv_cq);
788 if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
789 rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
793 * rvt_send_cq - add a new entry to completion queue
794 * by send queue
795 * @qp: send queue
796 * @wc: work completion entry to add
797 * @solicited: true if @entry is solicited
799 * This is wrapper function for rvt_enter_cq function call by
800 * send queue. If rvt_cq_enter return false, it means cq is
801 * full and the qp is put into error state.
803 static inline void rvt_send_cq(struct rvt_qp *qp, struct ib_wc *wc,
804 bool solicited)
806 struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.send_cq);
808 if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
809 rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
813 * rvt_qp_complete_swqe - insert send completion
814 * @qp - the qp
815 * @wqe - the send wqe
816 * @opcode - wc operation (driver dependent)
817 * @status - completion status
819 * Update the s_last information, and then insert a send
820 * completion into the completion
821 * queue if the qp indicates it should be done.
823 * See IBTA 10.7.3.1 for info on completion
824 * control.
826 * Return: new last
828 static inline u32
829 rvt_qp_complete_swqe(struct rvt_qp *qp,
830 struct rvt_swqe *wqe,
831 enum ib_wc_opcode opcode,
832 enum ib_wc_status status)
834 bool need_completion;
835 u64 wr_id;
836 u32 byte_len, last;
837 int flags = wqe->wr.send_flags;
839 rvt_qp_wqe_unreserve(qp, flags);
840 rvt_put_qp_swqe(qp, wqe);
842 need_completion =
843 !(flags & RVT_SEND_RESERVE_USED) &&
844 (!(qp->s_flags & RVT_S_SIGNAL_REQ_WR) ||
845 (flags & IB_SEND_SIGNALED) ||
846 status != IB_WC_SUCCESS);
847 if (need_completion) {
848 wr_id = wqe->wr.wr_id;
849 byte_len = wqe->length;
850 /* above fields required before writing s_last */
852 last = rvt_qp_swqe_incr(qp, qp->s_last);
853 /* see rvt_qp_is_avail() */
854 smp_store_release(&qp->s_last, last);
855 if (need_completion) {
856 struct ib_wc w = {
857 .wr_id = wr_id,
858 .status = status,
859 .opcode = opcode,
860 .qp = &qp->ibqp,
861 .byte_len = byte_len,
863 rvt_send_cq(qp, &w, status != IB_WC_SUCCESS);
865 return last;
868 extern const int ib_rvt_state_ops[];
870 struct rvt_dev_info;
871 int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only);
872 void rvt_comm_est(struct rvt_qp *qp);
873 void rvt_rc_error(struct rvt_qp *qp, enum ib_wc_status err);
874 unsigned long rvt_rnr_tbl_to_usec(u32 index);
875 enum hrtimer_restart rvt_rc_rnr_retry(struct hrtimer *t);
876 void rvt_add_rnr_timer(struct rvt_qp *qp, u32 aeth);
877 void rvt_del_timers_sync(struct rvt_qp *qp);
878 void rvt_stop_rc_timers(struct rvt_qp *qp);
879 void rvt_add_retry_timer_ext(struct rvt_qp *qp, u8 shift);
880 static inline void rvt_add_retry_timer(struct rvt_qp *qp)
882 rvt_add_retry_timer_ext(qp, 0);
885 void rvt_copy_sge(struct rvt_qp *qp, struct rvt_sge_state *ss,
886 void *data, u32 length,
887 bool release, bool copy_last);
888 void rvt_send_complete(struct rvt_qp *qp, struct rvt_swqe *wqe,
889 enum ib_wc_status status);
890 void rvt_ruc_loopback(struct rvt_qp *qp);
893 * struct rvt_qp_iter - the iterator for QPs
894 * @qp - the current QP
896 * This structure defines the current iterator
897 * state for sequenced access to all QPs relative
898 * to an rvt_dev_info.
900 struct rvt_qp_iter {
901 struct rvt_qp *qp;
902 /* private: backpointer */
903 struct rvt_dev_info *rdi;
904 /* private: callback routine */
905 void (*cb)(struct rvt_qp *qp, u64 v);
906 /* private: for arg to callback routine */
907 u64 v;
908 /* private: number of SMI,GSI QPs for device */
909 int specials;
910 /* private: current iterator index */
911 int n;
915 * ib_cq_tail - Return tail index of cq buffer
916 * @send_cq - The cq for send
918 * This is called in qp_iter_print to get tail
919 * of cq buffer.
921 static inline u32 ib_cq_tail(struct ib_cq *send_cq)
923 struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
925 return ibcq_to_rvtcq(send_cq)->ip ?
926 RDMA_READ_UAPI_ATOMIC(cq->queue->tail) :
927 ibcq_to_rvtcq(send_cq)->kqueue->tail;
931 * ib_cq_head - Return head index of cq buffer
932 * @send_cq - The cq for send
934 * This is called in qp_iter_print to get head
935 * of cq buffer.
937 static inline u32 ib_cq_head(struct ib_cq *send_cq)
939 struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
941 return ibcq_to_rvtcq(send_cq)->ip ?
942 RDMA_READ_UAPI_ATOMIC(cq->queue->head) :
943 ibcq_to_rvtcq(send_cq)->kqueue->head;
947 * rvt_free_rq - free memory allocated for rvt_rq struct
948 * @rvt_rq: request queue data structure
950 * This function should only be called if the rvt_mmap_info()
951 * has not succeeded.
953 static inline void rvt_free_rq(struct rvt_rq *rq)
955 kvfree(rq->kwq);
956 rq->kwq = NULL;
957 vfree(rq->wq);
958 rq->wq = NULL;
962 * rvt_to_iport - Get the ibport pointer
963 * @qp: the qp pointer
965 * This function returns the ibport pointer from the qp pointer.
967 static inline struct rvt_ibport *rvt_to_iport(struct rvt_qp *qp)
969 struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
971 return rdi->ports[qp->port_num - 1];
975 * rvt_rc_credit_avail - Check if there are enough RC credits for the request
976 * @qp: the qp
977 * @wqe: the request
979 * This function returns false when there are not enough credits for the given
980 * request and true otherwise.
982 static inline bool rvt_rc_credit_avail(struct rvt_qp *qp, struct rvt_swqe *wqe)
984 lockdep_assert_held(&qp->s_lock);
985 if (!(qp->s_flags & RVT_S_UNLIMITED_CREDIT) &&
986 rvt_cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) {
987 struct rvt_ibport *rvp = rvt_to_iport(qp);
989 qp->s_flags |= RVT_S_WAIT_SSN_CREDIT;
990 rvp->n_rc_crwaits++;
991 return false;
993 return true;
996 struct rvt_qp_iter *rvt_qp_iter_init(struct rvt_dev_info *rdi,
997 u64 v,
998 void (*cb)(struct rvt_qp *qp, u64 v));
999 int rvt_qp_iter_next(struct rvt_qp_iter *iter);
1000 void rvt_qp_iter(struct rvt_dev_info *rdi,
1001 u64 v,
1002 void (*cb)(struct rvt_qp *qp, u64 v));
1003 void rvt_qp_mr_clean(struct rvt_qp *qp, u32 lkey);
1004 #endif /* DEF_RDMAVT_INCQP_H */