include/scsi/scsi_transport_sas.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef SCSI_TRANSPORT_SAS_H
   3 #define SCSI_TRANSPORT_SAS_H
   4
   5 #include <linux/transport_class.h>
   6 #include <linux/types.h>
   7 #include <linux/mutex.h>
   8 #include <scsi/sas.h>
   9 #include <linux/bsg-lib.h>
  10
  11 struct scsi_transport_template;
  12 struct sas_rphy;
  13 struct request;
  14
  15 #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
  16 static inline int scsi_is_sas_rphy(const struct device *sdev)
  17 {
  18         return 0;
  19 }
  20 #else
  21 extern int scsi_is_sas_rphy(const struct device *);
  22 #endif
  23
  24 static inline int sas_protocol_ata(enum sas_protocol proto)
  25 {
  26         return ((proto & SAS_PROTOCOL_SATA) ||
  27                 (proto & SAS_PROTOCOL_STP))? 1 : 0;
  28 }
  29
  30 enum sas_linkrate {
  31         /* These Values are defined in the SAS standard */
  32         SAS_LINK_RATE_UNKNOWN = 0,
  33         SAS_PHY_DISABLED = 1,
  34         SAS_PHY_RESET_PROBLEM = 2,
  35         SAS_SATA_SPINUP_HOLD = 3,
  36         SAS_SATA_PORT_SELECTOR = 4,
  37         SAS_PHY_RESET_IN_PROGRESS = 5,
  38         SAS_LINK_RATE_1_5_GBPS = 8,
  39         SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
  40         SAS_LINK_RATE_3_0_GBPS = 9,
  41         SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
  42         SAS_LINK_RATE_6_0_GBPS = 10,
  43         SAS_LINK_RATE_12_0_GBPS = 11,
  44         SAS_LINK_RATE_22_5_GBPS = 12,
  45         /* These are virtual to the transport class and may never
  46          * be signalled normally since the standard defined field
  47          * is only 4 bits */
  48         SAS_LINK_RATE_FAILED = 0x10,
  49         SAS_PHY_VIRTUAL = 0x11,
  50 };
  51
  52 struct sas_identify {
  53         enum sas_device_type    device_type;
  54         enum sas_protocol       initiator_port_protocols;
  55         enum sas_protocol       target_port_protocols;
  56         u64                     sas_address;
  57         u8                      phy_identifier;
  58 };
  59
  60 struct sas_phy {
  61         struct device           dev;
  62         int                     number;
  63         int                     enabled;
  64
  65         /* phy identification */
  66         struct sas_identify     identify;
  67
  68         /* phy attributes */
  69         enum sas_linkrate       negotiated_linkrate;
  70         enum sas_linkrate       minimum_linkrate_hw;
  71         enum sas_linkrate       minimum_linkrate;
  72         enum sas_linkrate       maximum_linkrate_hw;
  73         enum sas_linkrate       maximum_linkrate;
  74
  75         /* link error statistics */
  76         u32                     invalid_dword_count;
  77         u32                     running_disparity_error_count;
  78         u32                     loss_of_dword_sync_count;
  79         u32                     phy_reset_problem_count;
  80
  81         /* for the list of phys belonging to a port */
  82         struct list_head        port_siblings;
  83
  84         /* available to the lldd */
  85         void                    *hostdata;
  86 };
  87
  88 #define dev_to_phy(d) \
  89         container_of((d), struct sas_phy, dev)
  90 #define transport_class_to_phy(dev) \
  91         dev_to_phy((dev)->parent)
  92 #define phy_to_shost(phy) \
  93         dev_to_shost((phy)->dev.parent)
  94
  95 struct request_queue;
  96 struct sas_rphy {
  97         struct device           dev;
  98         struct sas_identify     identify;
  99         struct list_head        list;
 100         struct request_queue    *q;
 101         u32                     scsi_target_id;
 102 };
 103
 104 #define dev_to_rphy(d) \
 105         container_of((d), struct sas_rphy, dev)
 106 #define transport_class_to_rphy(dev) \
 107         dev_to_rphy((dev)->parent)
 108 #define rphy_to_shost(rphy) \
 109         dev_to_shost((rphy)->dev.parent)
 110 #define target_to_rphy(targ) \
 111         dev_to_rphy((targ)->dev.parent)
 112
 113 struct sas_end_device {
 114         struct sas_rphy         rphy;
 115         /* flags */
 116         unsigned                ready_led_meaning:1;
 117         unsigned                tlr_supported:1;
 118         unsigned                tlr_enabled:1;
 119         /* parameters */
 120         u16                     I_T_nexus_loss_timeout;
 121         u16                     initiator_response_timeout;
 122 };
 123 #define rphy_to_end_device(r) \
 124         container_of((r), struct sas_end_device, rphy)
 125
 126 struct sas_expander_device {
 127         int    level;
 128         int    next_port_id;
 129
 130         #define SAS_EXPANDER_VENDOR_ID_LEN      8
 131         char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
 132         #define SAS_EXPANDER_PRODUCT_ID_LEN     16
 133         char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
 134         #define SAS_EXPANDER_PRODUCT_REV_LEN    4
 135         char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
 136         #define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN    8
 137         char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
 138         u16    component_id;
 139         u8     component_revision_id;
 140
 141         struct sas_rphy         rphy;
 142
 143 };
 144 #define rphy_to_expander_device(r) \
 145         container_of((r), struct sas_expander_device, rphy)
 146
 147 struct sas_port {
 148         struct device           dev;
 149
 150         int                     port_identifier;
 151         int                     num_phys;
 152         /* port flags */
 153         unsigned int            is_backlink:1;
 154
 155         /* the other end of the link */
 156         struct sas_rphy         *rphy;
 157
 158         struct mutex            phy_list_mutex;
 159         struct list_head        phy_list;
 160         struct list_head        del_list; /* libsas only */
 161 };
 162
 163 #define dev_to_sas_port(d) \
 164         container_of((d), struct sas_port, dev)
 165 #define transport_class_to_sas_port(dev) \
 166         dev_to_sas_port((dev)->parent)
 167
 168 struct sas_phy_linkrates {
 169         enum sas_linkrate maximum_linkrate;
 170         enum sas_linkrate minimum_linkrate;
 171 };
 172
 173 /* The functions by which the transport class and the driver communicate */
 174 struct sas_function_template {
 175         int (*get_linkerrors)(struct sas_phy *);
 176         int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
 177         int (*get_bay_identifier)(struct sas_rphy *);
 178         int (*phy_reset)(struct sas_phy *, int);
 179         int (*phy_enable)(struct sas_phy *, int);
 180         int (*phy_setup)(struct sas_phy *);
 181         void (*phy_release)(struct sas_phy *);
 182         int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
 183         void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
 184                         struct sas_rphy *);
 185 };
 186
 187
 188 void sas_remove_children(struct device *);
 189 extern void sas_remove_host(struct Scsi_Host *);
 190
 191 extern struct sas_phy *sas_phy_alloc(struct device *, int);
 192 extern void sas_phy_free(struct sas_phy *);
 193 extern int sas_phy_add(struct sas_phy *);
 194 extern void sas_phy_delete(struct sas_phy *);
 195 extern int scsi_is_sas_phy(const struct device *);
 196
 197 u64 sas_get_address(struct scsi_device *);
 198 unsigned int sas_tlr_supported(struct scsi_device *);
 199 unsigned int sas_is_tlr_enabled(struct scsi_device *);
 200 void sas_disable_tlr(struct scsi_device *);
 201 void sas_enable_tlr(struct scsi_device *);
 202
 203 bool sas_ata_ncq_prio_supported(struct scsi_device *sdev);
 204
 205 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
 206 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
 207 void sas_rphy_free(struct sas_rphy *);
 208 extern int sas_rphy_add(struct sas_rphy *);
 209 extern void sas_rphy_remove(struct sas_rphy *);
 210 extern void sas_rphy_delete(struct sas_rphy *);
 211 extern void sas_rphy_unlink(struct sas_rphy *);
 212
 213 struct sas_port *sas_port_alloc(struct device *, int);
 214 struct sas_port *sas_port_alloc_num(struct device *);
 215 int sas_port_add(struct sas_port *);
 216 void sas_port_free(struct sas_port *);
 217 void sas_port_delete(struct sas_port *);
 218 void sas_port_add_phy(struct sas_port *, struct sas_phy *);
 219 void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
 220 void sas_port_mark_backlink(struct sas_port *);
 221 int scsi_is_sas_port(const struct device *);
 222 struct sas_phy *sas_port_get_phy(struct sas_port *port);
 223 static inline void sas_port_put_phy(struct sas_phy *phy)
 224 {
 225         if (phy)
 226                 put_device(&phy->dev);
 227 }
 228
 229 extern struct scsi_transport_template *
 230 sas_attach_transport(struct sas_function_template *);
 231 extern void sas_release_transport(struct scsi_transport_template *);
 232 int sas_read_port_mode_page(struct scsi_device *);
 233
 234 static inline int
 235 scsi_is_sas_expander_device(struct device *dev)
 236 {
 237         struct sas_rphy *rphy;
 238         if (!scsi_is_sas_rphy(dev))
 239                 return 0;
 240         rphy = dev_to_rphy(dev);
 241         return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
 242                 rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
 243 }
 244
 245 #define scsi_is_sas_phy_local(phy)      scsi_is_host_device((phy)->dev.parent)
 246
 247 #endif /* SCSI_TRANSPORT_SAS_H */