drivers/iio/adc/berlin2-adc.c

   1 /*
   2  * Marvell Berlin2 ADC driver
   3  *
   4  * Copyright (C) 2015 Marvell Technology Group Ltd.
   5  *
   6  * Antoine Tenart <antoine.tenart@free-electrons.com>
   7  *
   8  * This file is licensed under the terms of the GNU General Public
   9  * License version 2. This program is licensed "as is" without any
  10  * warranty of any kind, whether express or implied.
  11  */
  12
  13 #include <linux/iio/iio.h>
  14 #include <linux/iio/driver.h>
  15 #include <linux/iio/machine.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/kernel.h>
  18 #include <linux/mod_devicetable.h>
  19 #include <linux/module.h>
  20 #include <linux/of.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/slab.h>
  23 #include <linux/mfd/syscon.h>
  24 #include <linux/regmap.h>
  25 #include <linux/sched.h>
  26 #include <linux/wait.h>
  27
  28 #define BERLIN2_SM_CTRL                         0x14
  29 #define  BERLIN2_SM_CTRL_SM_SOC_INT             BIT(1)
  30 #define  BERLIN2_SM_CTRL_SOC_SM_INT             BIT(2)
  31 #define  BERLIN2_SM_CTRL_ADC_SEL(x)             ((x) << 5)      /* 0-15 */
  32 #define  BERLIN2_SM_CTRL_ADC_SEL_MASK           GENMASK(8, 5)
  33 #define  BERLIN2_SM_CTRL_ADC_POWER              BIT(9)
  34 #define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV2        (0x0 << 10)
  35 #define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV3        (0x1 << 10)
  36 #define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV4        (0x2 << 10)
  37 #define  BERLIN2_SM_CTRL_ADC_CLKSEL_DIV8        (0x3 << 10)
  38 #define  BERLIN2_SM_CTRL_ADC_CLKSEL_MASK        GENMASK(11, 10)
  39 #define  BERLIN2_SM_CTRL_ADC_START              BIT(12)
  40 #define  BERLIN2_SM_CTRL_ADC_RESET              BIT(13)
  41 #define  BERLIN2_SM_CTRL_ADC_BANDGAP_RDY        BIT(14)
  42 #define  BERLIN2_SM_CTRL_ADC_CONT_SINGLE        (0x0 << 15)
  43 #define  BERLIN2_SM_CTRL_ADC_CONT_CONTINUOUS    (0x1 << 15)
  44 #define  BERLIN2_SM_CTRL_ADC_BUFFER_EN          BIT(16)
  45 #define  BERLIN2_SM_CTRL_ADC_VREF_EXT           (0x0 << 17)
  46 #define  BERLIN2_SM_CTRL_ADC_VREF_INT           (0x1 << 17)
  47 #define  BERLIN2_SM_CTRL_ADC_ROTATE             BIT(19)
  48 #define  BERLIN2_SM_CTRL_TSEN_EN                BIT(20)
  49 #define  BERLIN2_SM_CTRL_TSEN_CLK_SEL_125       (0x0 << 21)     /* 1.25 MHz */
  50 #define  BERLIN2_SM_CTRL_TSEN_CLK_SEL_250       (0x1 << 21)     /* 2.5 MHz */
  51 #define  BERLIN2_SM_CTRL_TSEN_MODE_0_125        (0x0 << 22)     /* 0-125 C */
  52 #define  BERLIN2_SM_CTRL_TSEN_MODE_10_50        (0x1 << 22)     /* 10-50 C */
  53 #define  BERLIN2_SM_CTRL_TSEN_RESET             BIT(29)
  54 #define BERLIN2_SM_ADC_DATA                     0x20
  55 #define  BERLIN2_SM_ADC_MASK                    GENMASK(9, 0)
  56 #define BERLIN2_SM_ADC_STATUS                   0x1c
  57 #define  BERLIN2_SM_ADC_STATUS_DATA_RDY(x)      BIT(x)          /* 0-15 */
  58 #define  BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK    GENMASK(15, 0)
  59 #define  BERLIN2_SM_ADC_STATUS_INT_EN(x)        (BIT(x) << 16)  /* 0-15 */
  60 #define  BERLIN2_SM_ADC_STATUS_INT_EN_MASK      GENMASK(31, 16)
  61 #define BERLIN2_SM_TSEN_STATUS                  0x24
  62 #define  BERLIN2_SM_TSEN_STATUS_DATA_RDY        BIT(0)
  63 #define  BERLIN2_SM_TSEN_STATUS_INT_EN          BIT(1)
  64 #define BERLIN2_SM_TSEN_DATA                    0x28
  65 #define  BERLIN2_SM_TSEN_MASK                   GENMASK(9, 0)
  66 #define BERLIN2_SM_TSEN_CTRL                    0x74
  67 #define  BERLIN2_SM_TSEN_CTRL_START             BIT(8)
  68 #define  BERLIN2_SM_TSEN_CTRL_SETTLING_4        (0x0 << 21)     /* 4 us */
  69 #define  BERLIN2_SM_TSEN_CTRL_SETTLING_12       (0x1 << 21)     /* 12 us */
  70 #define  BERLIN2_SM_TSEN_CTRL_SETTLING_MASK     BIT(21)
  71 #define  BERLIN2_SM_TSEN_CTRL_TRIM(x)           ((x) << 22)
  72 #define  BERLIN2_SM_TSEN_CTRL_TRIM_MASK         GENMASK(25, 22)
  73
  74 struct berlin2_adc_priv {
  75         struct regmap           *regmap;
  76         struct mutex            lock;
  77         wait_queue_head_t       wq;
  78         bool                    data_available;
  79         int                     data;
  80 };
  81
  82 #define BERLIN2_ADC_CHANNEL(n, t)                                       \
  83         {                                                               \
  84                 .channel                = n,                            \
  85                 .datasheet_name         = "channel"#n,                  \
  86                 .type                   = t,                            \
  87                 .indexed                = 1,                            \
  88                 .info_mask_separate     = BIT(IIO_CHAN_INFO_RAW),       \
  89         }
  90
  91 static const struct iio_chan_spec berlin2_adc_channels[] = {
  92         BERLIN2_ADC_CHANNEL(0, IIO_VOLTAGE),    /* external input */
  93         BERLIN2_ADC_CHANNEL(1, IIO_VOLTAGE),    /* external input */
  94         BERLIN2_ADC_CHANNEL(2, IIO_VOLTAGE),    /* external input */
  95         BERLIN2_ADC_CHANNEL(3, IIO_VOLTAGE),    /* external input */
  96         BERLIN2_ADC_CHANNEL(4, IIO_VOLTAGE),    /* reserved */
  97         BERLIN2_ADC_CHANNEL(5, IIO_VOLTAGE),    /* reserved */
  98         {                                       /* temperature sensor */
  99                 .channel                = 6,
 100                 .datasheet_name         = "channel6",
 101                 .type                   = IIO_TEMP,
 102                 .indexed                = 0,
 103                 .info_mask_separate     = BIT(IIO_CHAN_INFO_PROCESSED),
 104         },
 105         BERLIN2_ADC_CHANNEL(7, IIO_VOLTAGE),    /* reserved */
 106         IIO_CHAN_SOFT_TIMESTAMP(8),             /* timestamp */
 107 };
 108
 109 static int berlin2_adc_read(struct iio_dev *indio_dev, int channel)
 110 {
 111         struct berlin2_adc_priv *priv = iio_priv(indio_dev);
 112         int data, ret;
 113
 114         mutex_lock(&priv->lock);
 115
 116         /* Enable the interrupts */
 117         regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS,
 118                      BERLIN2_SM_ADC_STATUS_INT_EN(channel));
 119
 120         /* Configure the ADC */
 121         regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
 122                            BERLIN2_SM_CTRL_ADC_RESET |
 123                            BERLIN2_SM_CTRL_ADC_SEL_MASK |
 124                            BERLIN2_SM_CTRL_ADC_START,
 125                            BERLIN2_SM_CTRL_ADC_SEL(channel) |
 126                            BERLIN2_SM_CTRL_ADC_START);
 127
 128         ret = wait_event_interruptible_timeout(priv->wq, priv->data_available,
 129                                                msecs_to_jiffies(1000));
 130
 131         /* Disable the interrupts */
 132         regmap_clear_bits(priv->regmap, BERLIN2_SM_ADC_STATUS,
 133                           BERLIN2_SM_ADC_STATUS_INT_EN(channel));
 134
 135         if (ret == 0)
 136                 ret = -ETIMEDOUT;
 137         if (ret < 0) {
 138                 mutex_unlock(&priv->lock);
 139                 return ret;
 140         }
 141
 142         regmap_clear_bits(priv->regmap, BERLIN2_SM_CTRL,
 143                           BERLIN2_SM_CTRL_ADC_START);
 144
 145         data = priv->data;
 146         priv->data_available = false;
 147
 148         mutex_unlock(&priv->lock);
 149
 150         return data;
 151 }
 152
 153 static int berlin2_adc_tsen_read(struct iio_dev *indio_dev)
 154 {
 155         struct berlin2_adc_priv *priv = iio_priv(indio_dev);
 156         int data, ret;
 157
 158         mutex_lock(&priv->lock);
 159
 160         /* Enable interrupts */
 161         regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS,
 162                      BERLIN2_SM_TSEN_STATUS_INT_EN);
 163
 164         /* Configure the ADC */
 165         regmap_update_bits(priv->regmap, BERLIN2_SM_CTRL,
 166                            BERLIN2_SM_CTRL_TSEN_RESET |
 167                            BERLIN2_SM_CTRL_ADC_ROTATE,
 168                            BERLIN2_SM_CTRL_ADC_ROTATE);
 169
 170         /* Configure the temperature sensor */
 171         regmap_update_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL,
 172                            BERLIN2_SM_TSEN_CTRL_TRIM_MASK |
 173                            BERLIN2_SM_TSEN_CTRL_SETTLING_MASK |
 174                            BERLIN2_SM_TSEN_CTRL_START,
 175                            BERLIN2_SM_TSEN_CTRL_TRIM(3) |
 176                            BERLIN2_SM_TSEN_CTRL_SETTLING_12 |
 177                            BERLIN2_SM_TSEN_CTRL_START);
 178
 179         ret = wait_event_interruptible_timeout(priv->wq, priv->data_available,
 180                                                msecs_to_jiffies(1000));
 181
 182         /* Disable interrupts */
 183         regmap_clear_bits(priv->regmap, BERLIN2_SM_TSEN_STATUS,
 184                           BERLIN2_SM_TSEN_STATUS_INT_EN);
 185
 186         if (ret == 0)
 187                 ret = -ETIMEDOUT;
 188         if (ret < 0) {
 189                 mutex_unlock(&priv->lock);
 190                 return ret;
 191         }
 192
 193         regmap_clear_bits(priv->regmap, BERLIN2_SM_TSEN_CTRL,
 194                           BERLIN2_SM_TSEN_CTRL_START);
 195
 196         data = priv->data;
 197         priv->data_available = false;
 198
 199         mutex_unlock(&priv->lock);
 200
 201         return data;
 202 }
 203
 204 static int berlin2_adc_read_raw(struct iio_dev *indio_dev,
 205                                 struct iio_chan_spec const *chan, int *val,
 206                                 int *val2, long mask)
 207 {
 208         int temp;
 209
 210         switch (mask) {
 211         case IIO_CHAN_INFO_RAW:
 212                 if (chan->type != IIO_VOLTAGE)
 213                         return -EINVAL;
 214
 215                 *val = berlin2_adc_read(indio_dev, chan->channel);
 216                 if (*val < 0)
 217                         return *val;
 218
 219                 return IIO_VAL_INT;
 220         case IIO_CHAN_INFO_PROCESSED:
 221                 if (chan->type != IIO_TEMP)
 222                         return -EINVAL;
 223
 224                 temp = berlin2_adc_tsen_read(indio_dev);
 225                 if (temp < 0)
 226                         return temp;
 227
 228                 if (temp > 2047)
 229                         temp -= 4096;
 230
 231                 /* Convert to milli Celsius */
 232                 *val = ((temp * 100000) / 264 - 270000);
 233                 return IIO_VAL_INT;
 234         default:
 235                 break;
 236         }
 237
 238         return -EINVAL;
 239 }
 240
 241 static irqreturn_t berlin2_adc_irq(int irq, void *private)
 242 {
 243         struct berlin2_adc_priv *priv = iio_priv(private);
 244         unsigned val;
 245
 246         regmap_read(priv->regmap, BERLIN2_SM_ADC_STATUS, &val);
 247         if (val & BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK) {
 248                 regmap_read(priv->regmap, BERLIN2_SM_ADC_DATA, &priv->data);
 249                 priv->data &= BERLIN2_SM_ADC_MASK;
 250
 251                 val &= ~BERLIN2_SM_ADC_STATUS_DATA_RDY_MASK;
 252                 regmap_write(priv->regmap, BERLIN2_SM_ADC_STATUS, val);
 253
 254                 priv->data_available = true;
 255                 wake_up_interruptible(&priv->wq);
 256         }
 257
 258         return IRQ_HANDLED;
 259 }
 260
 261 static irqreturn_t berlin2_adc_tsen_irq(int irq, void *private)
 262 {
 263         struct berlin2_adc_priv *priv = iio_priv(private);
 264         unsigned val;
 265
 266         regmap_read(priv->regmap, BERLIN2_SM_TSEN_STATUS, &val);
 267         if (val & BERLIN2_SM_TSEN_STATUS_DATA_RDY) {
 268                 regmap_read(priv->regmap, BERLIN2_SM_TSEN_DATA, &priv->data);
 269                 priv->data &= BERLIN2_SM_TSEN_MASK;
 270
 271                 val &= ~BERLIN2_SM_TSEN_STATUS_DATA_RDY;
 272                 regmap_write(priv->regmap, BERLIN2_SM_TSEN_STATUS, val);
 273
 274                 priv->data_available = true;
 275                 wake_up_interruptible(&priv->wq);
 276         }
 277
 278         return IRQ_HANDLED;
 279 }
 280
 281 static const struct iio_info berlin2_adc_info = {
 282         .read_raw       = berlin2_adc_read_raw,
 283 };
 284
 285 static void berlin2_adc_powerdown(void *regmap)
 286 {
 287         regmap_clear_bits(regmap, BERLIN2_SM_CTRL, BERLIN2_SM_CTRL_ADC_POWER);
 288
 289 }
 290
 291 static int berlin2_adc_probe(struct platform_device *pdev)
 292 {
 293         struct iio_dev *indio_dev;
 294         struct berlin2_adc_priv *priv;
 295         struct device_node *parent_np = of_get_parent(pdev->dev.of_node);
 296         int irq, tsen_irq;
 297         int ret;
 298
 299         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
 300         if (!indio_dev) {
 301                 of_node_put(parent_np);
 302                 return -ENOMEM;
 303         }
 304
 305         priv = iio_priv(indio_dev);
 306
 307         priv->regmap = syscon_node_to_regmap(parent_np);
 308         of_node_put(parent_np);
 309         if (IS_ERR(priv->regmap))
 310                 return PTR_ERR(priv->regmap);
 311
 312         irq = platform_get_irq_byname(pdev, "adc");
 313         if (irq < 0)
 314                 return irq;
 315
 316         tsen_irq = platform_get_irq_byname(pdev, "tsen");
 317         if (tsen_irq < 0)
 318                 return tsen_irq;
 319
 320         ret = devm_request_irq(&pdev->dev, irq, berlin2_adc_irq, 0,
 321                                pdev->dev.driver->name, indio_dev);
 322         if (ret)
 323                 return ret;
 324
 325         ret = devm_request_irq(&pdev->dev, tsen_irq, berlin2_adc_tsen_irq,
 326                                0, pdev->dev.driver->name, indio_dev);
 327         if (ret)
 328                 return ret;
 329
 330         init_waitqueue_head(&priv->wq);
 331         mutex_init(&priv->lock);
 332
 333         indio_dev->name = dev_name(&pdev->dev);
 334         indio_dev->modes = INDIO_DIRECT_MODE;
 335         indio_dev->info = &berlin2_adc_info;
 336
 337         indio_dev->channels = berlin2_adc_channels;
 338         indio_dev->num_channels = ARRAY_SIZE(berlin2_adc_channels);
 339
 340         /* Power up the ADC */
 341         regmap_set_bits(priv->regmap, BERLIN2_SM_CTRL,
 342                         BERLIN2_SM_CTRL_ADC_POWER);
 343
 344         ret = devm_add_action_or_reset(&pdev->dev, berlin2_adc_powerdown,
 345                                        priv->regmap);
 346         if (ret)
 347                 return ret;
 348
 349         return devm_iio_device_register(&pdev->dev, indio_dev);
 350 }
 351
 352 static const struct of_device_id berlin2_adc_match[] = {
 353         { .compatible = "marvell,berlin2-adc", },
 354         { }
 355 };
 356 MODULE_DEVICE_TABLE(of, berlin2_adc_match);
 357
 358 static struct platform_driver berlin2_adc_driver = {
 359         .driver = {
 360                 .name           = "berlin2-adc",
 361                 .of_match_table = berlin2_adc_match,
 362         },
 363         .probe  = berlin2_adc_probe,
 364 };
 365 module_platform_driver(berlin2_adc_driver);
 366
 367 MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
 368 MODULE_DESCRIPTION("Marvell Berlin2 ADC driver");
 369 MODULE_LICENSE("GPL v2");