1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Adaptec AAC series RAID controller driver
4 * (c) Copyright 2001 Red Hat Inc.
6 * based on the old aacraid driver that is..
7 * Adaptec aacraid device driver for Linux.
9 * Copyright (c) 2000-2010 Adaptec, Inc.
10 * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
11 * 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
16 * Abstract: Contains Interfaces to manage IOs.
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/types.h>
22 #include <linux/pci.h>
23 #include <linux/spinlock.h>
24 #include <linux/slab.h>
25 #include <linux/completion.h>
26 #include <linux/blkdev.h>
27 #include <linux/uaccess.h>
28 #include <linux/module.h>
30 #include <linux/unaligned.h>
32 #include <scsi/scsi.h>
33 #include <scsi/scsi_cmnd.h>
34 #include <scsi/scsi_device.h>
35 #include <scsi/scsi_host.h>
39 /* values for inqd_pdt: Peripheral device type in plain English */
40 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
41 #define INQD_PDT_PROC 0x03 /* Processor device */
42 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
43 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
44 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
45 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
47 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
48 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
54 #define SENCODE_NO_SENSE 0x00
55 #define SENCODE_END_OF_DATA 0x00
56 #define SENCODE_BECOMING_READY 0x04
57 #define SENCODE_INIT_CMD_REQUIRED 0x04
58 #define SENCODE_UNRECOVERED_READ_ERROR 0x11
59 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
60 #define SENCODE_INVALID_COMMAND 0x20
61 #define SENCODE_LBA_OUT_OF_RANGE 0x21
62 #define SENCODE_INVALID_CDB_FIELD 0x24
63 #define SENCODE_LUN_NOT_SUPPORTED 0x25
64 #define SENCODE_INVALID_PARAM_FIELD 0x26
65 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
66 #define SENCODE_PARAM_VALUE_INVALID 0x26
67 #define SENCODE_RESET_OCCURRED 0x29
68 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
69 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
70 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
71 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
72 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
73 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
74 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
75 #define SENCODE_OVERLAPPED_COMMAND 0x4E
78 * Additional sense codes
81 #define ASENCODE_NO_SENSE 0x00
82 #define ASENCODE_END_OF_DATA 0x05
83 #define ASENCODE_BECOMING_READY 0x01
84 #define ASENCODE_INIT_CMD_REQUIRED 0x02
85 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
86 #define ASENCODE_INVALID_COMMAND 0x00
87 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
88 #define ASENCODE_INVALID_CDB_FIELD 0x00
89 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
90 #define ASENCODE_INVALID_PARAM_FIELD 0x00
91 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
92 #define ASENCODE_PARAM_VALUE_INVALID 0x02
93 #define ASENCODE_RESET_OCCURRED 0x00
94 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
95 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
96 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
97 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
98 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
99 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
100 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
101 #define ASENCODE_OVERLAPPED_COMMAND 0x00
103 #define BYTE0(x) (unsigned char)(x)
104 #define BYTE1(x) (unsigned char)((x) >> 8)
105 #define BYTE2(x) (unsigned char)((x) >> 16)
106 #define BYTE3(x) (unsigned char)((x) >> 24)
108 /* MODE_SENSE data format */
115 } __attribute__((packed
)) hd
;
121 } __attribute__((packed
)) bd
;
123 } __attribute__((packed
)) aac_modep_data
;
125 /* MODE_SENSE_10 data format */
133 } __attribute__((packed
)) hd
;
139 } __attribute__((packed
)) bd
;
141 } __attribute__((packed
)) aac_modep10_data
;
143 /*------------------------------------------------------------------------------
144 * S T R U C T S / T Y P E D E F S
145 *----------------------------------------------------------------------------*/
146 /* SCSI inquiry data */
147 struct inquiry_data
{
148 u8 inqd_pdt
; /* Peripheral qualifier | Peripheral Device Type */
149 u8 inqd_dtq
; /* RMB | Device Type Qualifier */
150 u8 inqd_ver
; /* ISO version | ECMA version | ANSI-approved version */
151 u8 inqd_rdf
; /* AENC | TrmIOP | Response data format */
152 u8 inqd_len
; /* Additional length (n-4) */
153 u8 inqd_pad1
[2];/* Reserved - must be zero */
154 u8 inqd_pad2
; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
155 u8 inqd_vid
[8]; /* Vendor ID */
156 u8 inqd_pid
[16];/* Product ID */
157 u8 inqd_prl
[4]; /* Product Revision Level */
160 /* Added for VPD 0x83 */
161 struct tvpd_id_descriptor_type_1
{
162 u8 codeset
:4; /* VPD_CODE_SET */
164 u8 identifiertype
:4; /* VPD_IDENTIFIER_TYPE */
170 u8 serialnumber
[8]; /* SN in ASCII */
174 struct tvpd_id_descriptor_type_2
{
175 u8 codeset
:4; /* VPD_CODE_SET */
177 u8 identifiertype
:4; /* VPD_IDENTIFIER_TYPE */
183 /* The serial number supposed to be 40 bits,
184 * bit we only support 32, so make the last byte zero. */
191 struct tvpd_id_descriptor_type_3
{
192 u8 codeset
: 4; /* VPD_CODE_SET */
194 u8 identifiertype
: 4; /* VPD_IDENTIFIER_TYPE */
203 u8 DeviceTypeQualifier
:3;
207 struct tvpd_id_descriptor_type_1 type1
;
208 struct tvpd_id_descriptor_type_2 type2
;
209 struct tvpd_id_descriptor_type_3 type3
;
213 * M O D U L E G L O B A L S
216 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*sgmap
);
217 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
);
218 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
);
219 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
220 struct aac_raw_io2
*rio2
, int sg_max
);
221 static long aac_build_sghba(struct scsi_cmnd
*scsicmd
,
222 struct aac_hba_cmd_req
*hbacmd
,
223 int sg_max
, u64 sg_address
);
224 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
,
225 int pages
, int nseg
, int nseg_new
);
226 static void aac_probe_container_scsi_done(struct scsi_cmnd
*scsi_cmnd
);
227 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
);
228 static int aac_send_hba_fib(struct scsi_cmnd
*scsicmd
);
229 #ifdef AAC_DETAILED_STATUS_INFO
230 static char *aac_get_status_string(u32 status
);
234 * Non dasd selection is handled entirely in aachba now
237 static int nondasd
= -1;
238 static int aac_cache
= 2; /* WCE=0 to avoid performance problems */
239 static int dacmode
= -1;
242 int startup_timeout
= 180;
243 int aif_timeout
= 120;
244 int aac_sync_mode
; /* Only Sync. transfer - disabled */
245 static int aac_convert_sgl
= 1; /* convert non-conformable s/g list - enabled */
247 module_param(aac_sync_mode
, int, S_IRUGO
|S_IWUSR
);
248 MODULE_PARM_DESC(aac_sync_mode
, "Force sync. transfer mode"
250 module_param(aac_convert_sgl
, int, S_IRUGO
|S_IWUSR
);
251 MODULE_PARM_DESC(aac_convert_sgl
, "Convert non-conformable s/g list"
253 module_param(nondasd
, int, S_IRUGO
|S_IWUSR
);
254 MODULE_PARM_DESC(nondasd
, "Control scanning of hba for nondasd devices."
256 module_param_named(cache
, aac_cache
, int, S_IRUGO
|S_IWUSR
);
257 MODULE_PARM_DESC(cache
, "Disable Queue Flush commands:\n"
258 "\tbit 0 - Disable FUA in WRITE SCSI commands\n"
259 "\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
260 "\tbit 2 - Disable only if Battery is protecting Cache");
261 module_param(dacmode
, int, S_IRUGO
|S_IWUSR
);
262 MODULE_PARM_DESC(dacmode
, "Control whether dma addressing is using 64 bit DAC."
264 module_param_named(commit
, aac_commit
, int, S_IRUGO
|S_IWUSR
);
265 MODULE_PARM_DESC(commit
, "Control whether a COMMIT_CONFIG is issued to the"
266 " adapter for foreign arrays.\n"
267 "This is typically needed in systems that do not have a BIOS."
269 module_param_named(msi
, aac_msi
, int, S_IRUGO
|S_IWUSR
);
270 MODULE_PARM_DESC(msi
, "IRQ handling."
271 " 0=PIC(default), 1=MSI, 2=MSI-X)");
272 module_param(startup_timeout
, int, S_IRUGO
|S_IWUSR
);
273 MODULE_PARM_DESC(startup_timeout
, "The duration of time in seconds to wait for"
274 " adapter to have its kernel up and\n"
275 "running. This is typically adjusted for large systems that do not"
277 module_param(aif_timeout
, int, S_IRUGO
|S_IWUSR
);
278 MODULE_PARM_DESC(aif_timeout
, "The duration of time in seconds to wait for"
279 " applications to pick up AIFs before\n"
280 "deregistering them. This is typically adjusted for heavily burdened"
284 module_param(aac_fib_dump
, int, 0644);
285 MODULE_PARM_DESC(aac_fib_dump
, "Dump controller fibs prior to IOP_RESET 0=off, 1=on");
288 module_param(numacb
, int, S_IRUGO
|S_IWUSR
);
289 MODULE_PARM_DESC(numacb
, "Request a limit to the number of adapter control"
290 " blocks (FIB) allocated. Valid values are 512 and down. Default is"
291 " to use suggestion from Firmware.");
293 static int acbsize
= -1;
294 module_param(acbsize
, int, S_IRUGO
|S_IWUSR
);
295 MODULE_PARM_DESC(acbsize
, "Request a specific adapter control block (FIB)"
296 " size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
297 " suggestion from Firmware.");
299 int update_interval
= 30 * 60;
300 module_param(update_interval
, int, S_IRUGO
|S_IWUSR
);
301 MODULE_PARM_DESC(update_interval
, "Interval in seconds between time sync"
302 " updates issued to adapter.");
304 int check_interval
= 60;
305 module_param(check_interval
, int, S_IRUGO
|S_IWUSR
);
306 MODULE_PARM_DESC(check_interval
, "Interval in seconds between adapter health"
309 int aac_check_reset
= 1;
310 module_param_named(check_reset
, aac_check_reset
, int, S_IRUGO
|S_IWUSR
);
311 MODULE_PARM_DESC(check_reset
, "If adapter fails health check, reset the"
312 " adapter. a value of -1 forces the reset to adapters programmed to"
315 int expose_physicals
= -1;
316 module_param(expose_physicals
, int, S_IRUGO
|S_IWUSR
);
317 MODULE_PARM_DESC(expose_physicals
, "Expose physical components of the arrays."
318 " -1=protect 0=off, 1=on");
320 int aac_reset_devices
;
321 module_param_named(reset_devices
, aac_reset_devices
, int, S_IRUGO
|S_IWUSR
);
322 MODULE_PARM_DESC(reset_devices
, "Force an adapter reset at initialization.");
324 static int aac_wwn
= 1;
325 module_param_named(wwn
, aac_wwn
, int, S_IRUGO
|S_IWUSR
);
326 MODULE_PARM_DESC(wwn
, "Select a WWN type for the arrays:\n"
328 "\t1 - Array Meta Data Signature (default)\n"
329 "\t2 - Adapter Serial Number");
332 static inline int aac_valid_context(struct scsi_cmnd
*scsicmd
,
333 struct fib
*fibptr
) {
334 struct scsi_device
*device
;
336 if (unlikely(!scsicmd
)) {
337 dprintk((KERN_WARNING
"aac_valid_context: scsi command corrupt\n"));
338 aac_fib_complete(fibptr
);
341 aac_priv(scsicmd
)->owner
= AAC_OWNER_MIDLEVEL
;
342 device
= scsicmd
->device
;
343 if (unlikely(!device
)) {
344 dprintk((KERN_WARNING
"aac_valid_context: scsi device corrupt\n"));
345 aac_fib_complete(fibptr
);
352 * aac_get_config_status - check the adapter configuration
353 * @dev: aac driver data
354 * @commit_flag: force sending CT_COMMIT_CONFIG
356 * Query config status, and commit the configuration if needed.
358 int aac_get_config_status(struct aac_dev
*dev
, int commit_flag
)
363 if (!(fibptr
= aac_fib_alloc(dev
)))
366 aac_fib_init(fibptr
);
368 struct aac_get_config_status
*dinfo
;
369 dinfo
= (struct aac_get_config_status
*) fib_data(fibptr
);
371 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
372 dinfo
->type
= cpu_to_le32(CT_GET_CONFIG_STATUS
);
373 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_config_status_resp
*)NULL
)->data
));
376 status
= aac_fib_send(ContainerCommand
,
378 sizeof (struct aac_get_config_status
),
383 printk(KERN_WARNING
"aac_get_config_status: SendFIB failed.\n");
385 struct aac_get_config_status_resp
*reply
386 = (struct aac_get_config_status_resp
*) fib_data(fibptr
);
387 dprintk((KERN_WARNING
388 "aac_get_config_status: response=%d status=%d action=%d\n",
389 le32_to_cpu(reply
->response
),
390 le32_to_cpu(reply
->status
),
391 le32_to_cpu(reply
->data
.action
)));
392 if ((le32_to_cpu(reply
->response
) != ST_OK
) ||
393 (le32_to_cpu(reply
->status
) != CT_OK
) ||
394 (le32_to_cpu(reply
->data
.action
) > CFACT_PAUSE
)) {
395 printk(KERN_WARNING
"aac_get_config_status: Will not issue the Commit Configuration\n");
399 /* Do not set XferState to zero unless receives a response from F/W */
401 aac_fib_complete(fibptr
);
403 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
405 if ((aac_commit
== 1) || commit_flag
) {
406 struct aac_commit_config
* dinfo
;
407 aac_fib_init(fibptr
);
408 dinfo
= (struct aac_commit_config
*) fib_data(fibptr
);
410 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
411 dinfo
->type
= cpu_to_le32(CT_COMMIT_CONFIG
);
413 status
= aac_fib_send(ContainerCommand
,
415 sizeof (struct aac_commit_config
),
419 /* Do not set XferState to zero unless
420 * receives a response from F/W */
422 aac_fib_complete(fibptr
);
423 } else if (aac_commit
== 0) {
425 "aac_get_config_status: Foreign device configurations are being ignored\n");
428 /* FIB should be freed only after getting the response from the F/W */
429 if (status
!= -ERESTARTSYS
)
430 aac_fib_free(fibptr
);
434 static void aac_expose_phy_device(struct scsi_cmnd
*scsicmd
)
437 scsi_sg_copy_to_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
438 if ((inq_data
& 0x20) && (inq_data
& 0x1f) == TYPE_DISK
) {
440 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
445 * aac_get_containers - list containers
446 * @dev: aac driver data
448 * Make a list of all containers on this controller
450 int aac_get_containers(struct aac_dev
*dev
)
452 struct fsa_dev_info
*fsa_dev_ptr
;
456 struct aac_get_container_count
*dinfo
;
457 struct aac_get_container_count_resp
*dresp
;
458 int maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
460 if (!(fibptr
= aac_fib_alloc(dev
)))
463 aac_fib_init(fibptr
);
464 dinfo
= (struct aac_get_container_count
*) fib_data(fibptr
);
465 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
466 dinfo
->type
= cpu_to_le32(CT_GET_CONTAINER_COUNT
);
468 status
= aac_fib_send(ContainerCommand
,
470 sizeof (struct aac_get_container_count
),
475 dresp
= (struct aac_get_container_count_resp
*)fib_data(fibptr
);
476 maximum_num_containers
= le32_to_cpu(dresp
->ContainerSwitchEntries
);
477 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
478 AAC_OPTION_SUPPORTED_240_VOLUMES
) {
479 maximum_num_containers
=
480 le32_to_cpu(dresp
->MaxSimpleVolumes
);
482 aac_fib_complete(fibptr
);
484 /* FIB should be freed only after getting the response from the F/W */
485 if (status
!= -ERESTARTSYS
)
486 aac_fib_free(fibptr
);
488 if (maximum_num_containers
< MAXIMUM_NUM_CONTAINERS
)
489 maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
490 if (dev
->fsa_dev
== NULL
||
491 dev
->maximum_num_containers
!= maximum_num_containers
) {
493 fsa_dev_ptr
= dev
->fsa_dev
;
495 dev
->fsa_dev
= kcalloc(maximum_num_containers
,
496 sizeof(*fsa_dev_ptr
), GFP_KERNEL
);
505 dev
->maximum_num_containers
= maximum_num_containers
;
507 for (index
= 0; index
< dev
->maximum_num_containers
; index
++) {
508 dev
->fsa_dev
[index
].devname
[0] = '\0';
509 dev
->fsa_dev
[index
].valid
= 0;
511 status
= aac_probe_container(dev
, index
);
514 printk(KERN_WARNING
"aac_get_containers: SendFIB failed.\n");
521 static void aac_scsi_done(struct scsi_cmnd
*scmd
)
523 if (scmd
->device
->request_queue
) {
524 /* SCSI command has been submitted by the SCSI mid-layer. */
527 /* SCSI command has been submitted by aac_probe_container(). */
528 aac_probe_container_scsi_done(scmd
);
532 static void get_container_name_callback(void *context
, struct fib
* fibptr
)
534 struct aac_get_name_resp
* get_name_reply
;
535 struct scsi_cmnd
* scsicmd
;
537 scsicmd
= (struct scsi_cmnd
*) context
;
539 if (!aac_valid_context(scsicmd
, fibptr
))
542 dprintk((KERN_DEBUG
"get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies
));
543 BUG_ON(fibptr
== NULL
);
545 get_name_reply
= (struct aac_get_name_resp
*) fib_data(fibptr
);
546 /* Failure is irrelevant, using default value instead */
547 if ((le32_to_cpu(get_name_reply
->status
) == CT_OK
)
548 && (get_name_reply
->data
[0] != '\0')) {
549 char *sp
= get_name_reply
->data
;
550 int data_size
= sizeof_field(struct aac_get_name_resp
, data
);
552 sp
[data_size
- 1] = '\0';
556 struct inquiry_data inq
;
557 char d
[sizeof(((struct inquiry_data
*)NULL
)->inqd_pid
)];
558 int count
= sizeof(d
);
561 *dp
++ = (*sp
) ? *sp
++ : ' ';
562 } while (--count
> 0);
564 scsi_sg_copy_to_buffer(scsicmd
, &inq
, sizeof(inq
));
565 memcpy(inq
.inqd_pid
, d
, sizeof(d
));
566 scsi_sg_copy_from_buffer(scsicmd
, &inq
, sizeof(inq
));
570 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
572 aac_fib_complete(fibptr
);
573 aac_scsi_done(scsicmd
);
577 * aac_get_container_name - get container name, none blocking.
579 static int aac_get_container_name(struct scsi_cmnd
* scsicmd
)
583 struct aac_get_name
*dinfo
;
584 struct fib
* cmd_fibcontext
;
585 struct aac_dev
* dev
;
587 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
589 data_size
= sizeof_field(struct aac_get_name_resp
, data
);
591 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
593 aac_fib_init(cmd_fibcontext
);
594 dinfo
= (struct aac_get_name
*) fib_data(cmd_fibcontext
);
595 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
597 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
598 dinfo
->type
= cpu_to_le32(CT_READ_NAME
);
599 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
600 dinfo
->count
= cpu_to_le32(data_size
- 1);
602 status
= aac_fib_send(ContainerCommand
,
604 sizeof(struct aac_get_name_resp
),
607 (fib_callback
)get_container_name_callback
,
611 * Check that the command queued to the controller
613 if (status
== -EINPROGRESS
)
616 printk(KERN_WARNING
"aac_get_container_name: aac_fib_send failed with status: %d.\n", status
);
617 aac_fib_complete(cmd_fibcontext
);
621 static int aac_probe_container_callback2(struct scsi_cmnd
* scsicmd
)
623 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
625 if ((fsa_dev_ptr
[scmd_id(scsicmd
)].valid
& 1))
626 return aac_scsi_cmd(scsicmd
);
628 scsicmd
->result
= DID_NO_CONNECT
<< 16;
629 aac_scsi_done(scsicmd
);
633 static void _aac_probe_container2(void * context
, struct fib
* fibptr
)
635 struct fsa_dev_info
*fsa_dev_ptr
;
636 int (*callback
)(struct scsi_cmnd
*);
637 struct scsi_cmnd
*scsicmd
= context
;
638 struct aac_cmd_priv
*cmd_priv
= aac_priv(scsicmd
);
642 if (!aac_valid_context(scsicmd
, fibptr
))
645 cmd_priv
->status
= 0;
646 fsa_dev_ptr
= fibptr
->dev
->fsa_dev
;
648 struct aac_mount
* dresp
= (struct aac_mount
*) fib_data(fibptr
);
651 fsa_dev_ptr
+= scmd_id(scsicmd
);
653 fibptr
->dev
->supplement_adapter_info
.supported_options2
;
655 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
656 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
) &&
657 (le32_to_cpu(dresp
->mnt
[0].state
) != FSCS_HIDDEN
)) {
658 if (!(sup_options2
& AAC_OPTION_VARIABLE_BLOCK_SIZE
)) {
659 dresp
->mnt
[0].fileinfo
.bdevinfo
.block_size
= 0x200;
660 fsa_dev_ptr
->block_size
= 0x200;
662 fsa_dev_ptr
->block_size
=
663 le32_to_cpu(dresp
->mnt
[0].fileinfo
.bdevinfo
.block_size
);
665 for (i
= 0; i
< 16; i
++)
666 fsa_dev_ptr
->identifier
[i
] =
667 dresp
->mnt
[0].fileinfo
.bdevinfo
669 fsa_dev_ptr
->valid
= 1;
670 /* sense_key holds the current state of the spin-up */
671 if (dresp
->mnt
[0].state
& cpu_to_le32(FSCS_NOT_READY
))
672 fsa_dev_ptr
->sense_data
.sense_key
= NOT_READY
;
673 else if (fsa_dev_ptr
->sense_data
.sense_key
== NOT_READY
)
674 fsa_dev_ptr
->sense_data
.sense_key
= NO_SENSE
;
675 fsa_dev_ptr
->type
= le32_to_cpu(dresp
->mnt
[0].vol
);
677 = ((u64
)le32_to_cpu(dresp
->mnt
[0].capacity
)) +
678 (((u64
)le32_to_cpu(dresp
->mnt
[0].capacityhigh
)) << 32);
679 fsa_dev_ptr
->ro
= ((le32_to_cpu(dresp
->mnt
[0].state
) & FSCS_READONLY
) != 0);
681 if ((fsa_dev_ptr
->valid
& 1) == 0)
682 fsa_dev_ptr
->valid
= 0;
683 cmd_priv
->status
= le32_to_cpu(dresp
->count
);
685 aac_fib_complete(fibptr
);
686 aac_fib_free(fibptr
);
687 callback
= cmd_priv
->callback
;
688 cmd_priv
->callback
= NULL
;
689 (*callback
)(scsicmd
);
693 static void _aac_probe_container1(void * context
, struct fib
* fibptr
)
695 struct scsi_cmnd
* scsicmd
;
696 struct aac_mount
* dresp
;
697 struct aac_query_mount
*dinfo
;
700 dresp
= (struct aac_mount
*) fib_data(fibptr
);
701 if (!aac_supports_2T(fibptr
->dev
)) {
702 dresp
->mnt
[0].capacityhigh
= 0;
703 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
704 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
)) {
705 _aac_probe_container2(context
, fibptr
);
709 scsicmd
= (struct scsi_cmnd
*) context
;
711 if (!aac_valid_context(scsicmd
, fibptr
))
714 aac_fib_init(fibptr
);
716 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
718 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
719 AAC_OPTION_VARIABLE_BLOCK_SIZE
)
720 dinfo
->command
= cpu_to_le32(VM_NameServeAllBlk
);
722 dinfo
->command
= cpu_to_le32(VM_NameServe64
);
724 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
725 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
726 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
728 status
= aac_fib_send(ContainerCommand
,
730 sizeof(struct aac_query_mount
),
733 _aac_probe_container2
,
736 * Check that the command queued to the controller
738 if (status
< 0 && status
!= -EINPROGRESS
) {
739 /* Inherit results from VM_NameServe, if any */
740 dresp
->status
= cpu_to_le32(ST_OK
);
741 _aac_probe_container2(context
, fibptr
);
745 static int _aac_probe_container(struct scsi_cmnd
* scsicmd
, int (*callback
)(struct scsi_cmnd
*))
747 struct aac_cmd_priv
*cmd_priv
= aac_priv(scsicmd
);
749 int status
= -ENOMEM
;
751 if ((fibptr
= aac_fib_alloc((struct aac_dev
*)scsicmd
->device
->host
->hostdata
))) {
752 struct aac_query_mount
*dinfo
;
754 aac_fib_init(fibptr
);
756 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
758 if (fibptr
->dev
->supplement_adapter_info
.supported_options2
&
759 AAC_OPTION_VARIABLE_BLOCK_SIZE
)
760 dinfo
->command
= cpu_to_le32(VM_NameServeAllBlk
);
762 dinfo
->command
= cpu_to_le32(VM_NameServe
);
764 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
765 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
766 cmd_priv
->callback
= callback
;
767 cmd_priv
->owner
= AAC_OWNER_FIRMWARE
;
769 status
= aac_fib_send(ContainerCommand
,
771 sizeof(struct aac_query_mount
),
774 _aac_probe_container1
,
777 * Check that the command queued to the controller
779 if (status
== -EINPROGRESS
)
783 cmd_priv
->callback
= NULL
;
784 aac_fib_complete(fibptr
);
785 aac_fib_free(fibptr
);
789 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
791 fsa_dev_ptr
+= scmd_id(scsicmd
);
792 if ((fsa_dev_ptr
->valid
& 1) == 0) {
793 fsa_dev_ptr
->valid
= 0;
794 return (*callback
)(scsicmd
);
802 * aac_probe_container_callback1 - query a logical volume
803 * @scsicmd: the scsi command block
805 * Queries the controller about the given volume. The volume information
806 * is updated in the struct fsa_dev_info structure rather than returned.
808 static int aac_probe_container_callback1(struct scsi_cmnd
* scsicmd
)
810 scsicmd
->device
= NULL
;
814 static void aac_probe_container_scsi_done(struct scsi_cmnd
*scsi_cmnd
)
816 aac_probe_container_callback1(scsi_cmnd
);
819 int aac_probe_container(struct aac_dev
*dev
, int cid
)
821 struct aac_cmd_priv
*cmd_priv
;
822 struct scsi_cmnd
*scsicmd
= kzalloc(sizeof(*scsicmd
) + sizeof(*cmd_priv
), GFP_KERNEL
);
823 struct scsi_device
*scsidev
= kzalloc(sizeof(*scsidev
), GFP_KERNEL
);
826 if (!scsicmd
|| !scsidev
) {
832 scsicmd
->device
= scsidev
;
833 scsidev
->sdev_state
= 0;
835 scsidev
->host
= dev
->scsi_host_ptr
;
837 if (_aac_probe_container(scsicmd
, aac_probe_container_callback1
) == 0)
838 while (scsicmd
->device
== scsidev
)
841 cmd_priv
= aac_priv(scsicmd
);
842 status
= cmd_priv
->status
;
847 /* Local Structure to set SCSI inquiry data strings */
849 char vid
[8]; /* Vendor ID */
850 char pid
[16]; /* Product ID */
851 char prl
[4]; /* Product Revision Level */
855 * inqstrcpy - string merge
856 * @a: string to copy from
857 * @b: string to copy to
859 * Copy a String from one location to another
863 static void inqstrcpy(char *a
, char *b
)
866 while (*a
!= (char)0)
870 static char *container_types
[] = {
894 char * get_container_type(unsigned tindex
)
896 if (tindex
>= ARRAY_SIZE(container_types
))
897 tindex
= ARRAY_SIZE(container_types
) - 1;
898 return container_types
[tindex
];
901 /* Function: setinqstr
903 * Arguments: [1] pointer to void [1] int
905 * Purpose: Sets SCSI inquiry data strings for vendor, product
906 * and revision level. Allows strings to be set in platform dependent
907 * files instead of in OS dependent driver source.
910 static void setinqstr(struct aac_dev
*dev
, void *data
, int tindex
)
912 struct scsi_inq
*str
;
913 struct aac_supplement_adapter_info
*sup_adap_info
;
915 sup_adap_info
= &dev
->supplement_adapter_info
;
916 str
= (struct scsi_inq
*)(data
); /* cast data to scsi inq block */
917 memset(str
, ' ', sizeof(*str
));
919 if (sup_adap_info
->adapter_type_text
[0]) {
922 char *cname
= kmemdup(sup_adap_info
->adapter_type_text
,
923 sizeof(sup_adap_info
->adapter_type_text
),
929 if ((cp
[0] == 'A') && (cp
[1] == 'O') && (cp
[2] == 'C'))
930 inqstrcpy("SMC", str
->vid
);
932 c
= sizeof(str
->vid
);
933 while (*cp
&& *cp
!= ' ' && --c
)
937 inqstrcpy(cname
, str
->vid
);
939 while (*cp
&& *cp
!= ' ')
944 /* last six chars reserved for vol type */
945 if (strlen(cp
) > sizeof(str
->pid
))
946 cp
[sizeof(str
->pid
)] = '\0';
947 inqstrcpy (cp
, str
->pid
);
951 struct aac_driver_ident
*mp
= aac_get_driver_ident(dev
->cardtype
);
953 inqstrcpy (mp
->vname
, str
->vid
);
954 /* last six chars reserved for vol type */
955 inqstrcpy (mp
->model
, str
->pid
);
958 if (tindex
< ARRAY_SIZE(container_types
)){
959 char *findit
= str
->pid
;
961 for ( ; *findit
!= ' '; findit
++); /* walk till we find a space */
962 /* RAID is superfluous in the context of a RAID device */
963 if (memcmp(findit
-4, "RAID", 4) == 0)
964 *(findit
-= 4) = ' ';
965 if (((findit
- str
->pid
) + strlen(container_types
[tindex
]))
966 < (sizeof(str
->pid
) + sizeof(str
->prl
)))
967 inqstrcpy (container_types
[tindex
], findit
+ 1);
969 inqstrcpy ("V1.0", str
->prl
);
972 static void build_vpd83_type3(struct tvpd_page83
*vpdpage83data
,
973 struct aac_dev
*dev
, struct scsi_cmnd
*scsicmd
)
977 vpdpage83data
->type3
.codeset
= 1;
978 vpdpage83data
->type3
.identifiertype
= 3;
979 vpdpage83data
->type3
.identifierlength
= sizeof(vpdpage83data
->type3
)
982 for (container
= 0; container
< dev
->maximum_num_containers
;
985 if (scmd_id(scsicmd
) == container
) {
986 memcpy(vpdpage83data
->type3
.Identifier
,
987 dev
->fsa_dev
[container
].identifier
,
994 static void get_container_serial_callback(void *context
, struct fib
* fibptr
)
996 struct aac_get_serial_resp
* get_serial_reply
;
997 struct scsi_cmnd
* scsicmd
;
999 BUG_ON(fibptr
== NULL
);
1001 scsicmd
= (struct scsi_cmnd
*) context
;
1002 if (!aac_valid_context(scsicmd
, fibptr
))
1005 get_serial_reply
= (struct aac_get_serial_resp
*) fib_data(fibptr
);
1006 /* Failure is irrelevant, using default value instead */
1007 if (le32_to_cpu(get_serial_reply
->status
) == CT_OK
) {
1008 /*Check to see if it's for VPD 0x83 or 0x80 */
1009 if (scsicmd
->cmnd
[2] == 0x83) {
1010 /* vpd page 0x83 - Device Identification Page */
1011 struct aac_dev
*dev
;
1013 struct tvpd_page83 vpdpage83data
;
1015 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1017 memset(((u8
*)&vpdpage83data
), 0,
1018 sizeof(vpdpage83data
));
1020 /* DIRECT_ACCESS_DEVIC */
1021 vpdpage83data
.DeviceType
= 0;
1022 /* DEVICE_CONNECTED */
1023 vpdpage83data
.DeviceTypeQualifier
= 0;
1024 /* VPD_DEVICE_IDENTIFIERS */
1025 vpdpage83data
.PageCode
= 0x83;
1026 vpdpage83data
.reserved
= 0;
1027 vpdpage83data
.PageLength
=
1028 sizeof(vpdpage83data
.type1
) +
1029 sizeof(vpdpage83data
.type2
);
1031 /* VPD 83 Type 3 is not supported for ARC */
1032 if (dev
->sa_firmware
)
1033 vpdpage83data
.PageLength
+=
1034 sizeof(vpdpage83data
.type3
);
1036 /* T10 Vendor Identifier Field Format */
1037 /* VpdcodesetAscii */
1038 vpdpage83data
.type1
.codeset
= 2;
1039 /* VpdIdentifierTypeVendorId */
1040 vpdpage83data
.type1
.identifiertype
= 1;
1041 vpdpage83data
.type1
.identifierlength
=
1042 sizeof(vpdpage83data
.type1
) - 4;
1044 /* "ADAPTEC " for adaptec */
1045 memcpy(vpdpage83data
.type1
.venid
,
1047 sizeof(vpdpage83data
.type1
.venid
));
1048 memcpy(vpdpage83data
.type1
.productid
,
1051 vpdpage83data
.type1
.productid
));
1053 /* Convert to ascii based serial number.
1054 * The LSB is the end.
1056 for (i
= 0; i
< 8; i
++) {
1058 (u8
)((get_serial_reply
->uid
>> ((7 - i
) * 4)) & 0xF);
1060 vpdpage83data
.type1
.serialnumber
[i
] =
1063 vpdpage83data
.type1
.serialnumber
[i
] =
1068 /* VpdCodeSetBinary */
1069 vpdpage83data
.type2
.codeset
= 1;
1070 /* VpdidentifiertypeEUI64 */
1071 vpdpage83data
.type2
.identifiertype
= 2;
1072 vpdpage83data
.type2
.identifierlength
=
1073 sizeof(vpdpage83data
.type2
) - 4;
1075 vpdpage83data
.type2
.eu64id
.venid
[0] = 0xD0;
1076 vpdpage83data
.type2
.eu64id
.venid
[1] = 0;
1077 vpdpage83data
.type2
.eu64id
.venid
[2] = 0;
1079 vpdpage83data
.type2
.eu64id
.Serial
=
1080 get_serial_reply
->uid
;
1081 vpdpage83data
.type2
.eu64id
.reserved
= 0;
1084 * VpdIdentifierTypeFCPHName
1085 * VPD 0x83 Type 3 not supported for ARC
1087 if (dev
->sa_firmware
) {
1088 build_vpd83_type3(&vpdpage83data
,
1092 /* Move the inquiry data to the response buffer. */
1093 scsi_sg_copy_from_buffer(scsicmd
, &vpdpage83data
,
1094 sizeof(vpdpage83data
));
1096 /* It must be for VPD 0x80 */
1099 sp
[0] = INQD_PDT_DA
;
1100 sp
[1] = scsicmd
->cmnd
[2];
1102 sp
[3] = scnprintf(sp
+4, sizeof(sp
)-4, "%08X",
1103 le32_to_cpu(get_serial_reply
->uid
));
1104 scsi_sg_copy_from_buffer(scsicmd
, sp
,
1109 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
1111 aac_fib_complete(fibptr
);
1112 aac_scsi_done(scsicmd
);
1116 * aac_get_container_serial - get container serial, none blocking.
1118 static int aac_get_container_serial(struct scsi_cmnd
* scsicmd
)
1121 struct aac_get_serial
*dinfo
;
1122 struct fib
* cmd_fibcontext
;
1123 struct aac_dev
* dev
;
1125 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1127 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
1129 aac_fib_init(cmd_fibcontext
);
1130 dinfo
= (struct aac_get_serial
*) fib_data(cmd_fibcontext
);
1132 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
1133 dinfo
->type
= cpu_to_le32(CT_CID_TO_32BITS_UID
);
1134 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
1135 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
1137 status
= aac_fib_send(ContainerCommand
,
1139 sizeof(struct aac_get_serial_resp
),
1142 (fib_callback
) get_container_serial_callback
,
1146 * Check that the command queued to the controller
1148 if (status
== -EINPROGRESS
)
1151 printk(KERN_WARNING
"aac_get_container_serial: aac_fib_send failed with status: %d.\n", status
);
1152 aac_fib_complete(cmd_fibcontext
);
1156 /* Function: setinqserial
1158 * Arguments: [1] pointer to void [1] int
1160 * Purpose: Sets SCSI Unit Serial number.
1161 * This is a fake. We should read a proper
1162 * serial number from the container. <SuSE>But
1163 * without docs it's quite hard to do it :-)
1164 * So this will have to do in the meantime.</SuSE>
1167 static int setinqserial(struct aac_dev
*dev
, void *data
, int cid
)
1170 * This breaks array migration.
1172 return scnprintf((char *)(data
), sizeof(struct scsi_inq
) - 4, "%08X%02X",
1173 le32_to_cpu(dev
->adapter_info
.serial
[0]), cid
);
1176 static inline void set_sense(struct sense_data
*sense_data
, u8 sense_key
,
1177 u8 sense_code
, u8 a_sense_code
, u8 bit_pointer
, u16 field_pointer
)
1179 u8
*sense_buf
= (u8
*)sense_data
;
1180 /* Sense data valid, err code 70h */
1181 sense_buf
[0] = 0x70; /* No info field */
1182 sense_buf
[1] = 0; /* Segment number, always zero */
1184 sense_buf
[2] = sense_key
; /* Sense key */
1186 sense_buf
[12] = sense_code
; /* Additional sense code */
1187 sense_buf
[13] = a_sense_code
; /* Additional sense code qualifier */
1189 if (sense_key
== ILLEGAL_REQUEST
) {
1190 sense_buf
[7] = 10; /* Additional sense length */
1192 sense_buf
[15] = bit_pointer
;
1193 /* Illegal parameter is in the parameter block */
1194 if (sense_code
== SENCODE_INVALID_CDB_FIELD
)
1195 sense_buf
[15] |= 0xc0;/* Std sense key specific field */
1196 /* Illegal parameter is in the CDB block */
1197 sense_buf
[16] = field_pointer
>> 8; /* MSB */
1198 sense_buf
[17] = field_pointer
; /* LSB */
1200 sense_buf
[7] = 6; /* Additional sense length */
1203 static int aac_bounds_32(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
1205 if (lba
& 0xffffffff00000000LL
) {
1206 int cid
= scmd_id(cmd
);
1207 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
1208 cmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
1209 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
1210 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
1211 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
1212 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1213 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1214 SCSI_SENSE_BUFFERSIZE
));
1221 static int aac_bounds_64(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
1226 static void io_callback(void *context
, struct fib
* fibptr
);
1228 static int aac_read_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1230 struct aac_dev
*dev
= fib
->dev
;
1231 u16 fibsize
, command
;
1235 if ((dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
||
1236 dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE3
) &&
1238 struct aac_raw_io2
*readcmd2
;
1239 readcmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1240 memset(readcmd2
, 0, sizeof(struct aac_raw_io2
));
1241 readcmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1242 readcmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1243 readcmd2
->byteCount
= cpu_to_le32(count
*
1244 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1245 readcmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1246 readcmd2
->flags
= cpu_to_le16(RIO2_IO_TYPE_READ
);
1247 ret
= aac_build_sgraw2(cmd
, readcmd2
,
1248 dev
->scsi_host_ptr
->sg_tablesize
);
1251 command
= ContainerRawIo2
;
1252 fibsize
= struct_size(readcmd2
, sge
,
1253 le32_to_cpu(readcmd2
->sgeCnt
));
1255 struct aac_raw_io
*readcmd
;
1256 readcmd
= (struct aac_raw_io
*) fib_data(fib
);
1257 readcmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1258 readcmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1259 readcmd
->count
= cpu_to_le32(count
*
1260 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1261 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1262 readcmd
->flags
= cpu_to_le16(RIO_TYPE_READ
);
1263 readcmd
->bpTotal
= 0;
1264 readcmd
->bpComplete
= 0;
1265 ret
= aac_build_sgraw(cmd
, &readcmd
->sg
);
1268 command
= ContainerRawIo
;
1269 fibsize
= sizeof(struct aac_raw_io
) +
1270 (le32_to_cpu(readcmd
->sg
.count
) * sizeof(struct sgentryraw
));
1273 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1275 * Now send the Fib to the adapter
1277 return aac_fib_send(command
,
1282 (fib_callback
) io_callback
,
1286 static int aac_read_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1289 struct aac_read64
*readcmd
;
1293 readcmd
= (struct aac_read64
*) fib_data(fib
);
1294 readcmd
->command
= cpu_to_le32(VM_CtHostRead64
);
1295 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1296 readcmd
->sector_count
= cpu_to_le16(count
);
1297 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1301 ret
= aac_build_sg64(cmd
, &readcmd
->sg
);
1304 fibsize
= sizeof(struct aac_read64
) +
1305 (le32_to_cpu(readcmd
->sg
.count
) *
1306 sizeof (struct sgentry64
));
1307 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1308 sizeof(struct aac_fibhdr
)));
1310 * Now send the Fib to the adapter
1312 return aac_fib_send(ContainerCommand64
,
1317 (fib_callback
) io_callback
,
1321 static int aac_read_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
1324 struct aac_read
*readcmd
;
1325 struct aac_dev
*dev
= fib
->dev
;
1329 readcmd
= (struct aac_read
*) fib_data(fib
);
1330 readcmd
->command
= cpu_to_le32(VM_CtBlockRead
);
1331 readcmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1332 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1333 readcmd
->count
= cpu_to_le32(count
*
1334 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1336 ret
= aac_build_sg(cmd
, &readcmd
->sg
);
1339 fibsize
= sizeof(struct aac_read
) +
1340 (le32_to_cpu(readcmd
->sg
.count
) *
1341 sizeof (struct sgentry
));
1342 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1343 sizeof(struct aac_fibhdr
)));
1345 * Now send the Fib to the adapter
1347 return aac_fib_send(ContainerCommand
,
1352 (fib_callback
) io_callback
,
1356 static int aac_write_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1358 struct aac_dev
*dev
= fib
->dev
;
1359 u16 fibsize
, command
;
1363 if ((dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE2
||
1364 dev
->comm_interface
== AAC_COMM_MESSAGE_TYPE3
) &&
1366 struct aac_raw_io2
*writecmd2
;
1367 writecmd2
= (struct aac_raw_io2
*) fib_data(fib
);
1368 memset(writecmd2
, 0, sizeof(struct aac_raw_io2
));
1369 writecmd2
->blockLow
= cpu_to_le32((u32
)(lba
&0xffffffff));
1370 writecmd2
->blockHigh
= cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1371 writecmd2
->byteCount
= cpu_to_le32(count
*
1372 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1373 writecmd2
->cid
= cpu_to_le16(scmd_id(cmd
));
1374 writecmd2
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1375 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1376 cpu_to_le16(RIO2_IO_TYPE_WRITE
|RIO2_IO_SUREWRITE
) :
1377 cpu_to_le16(RIO2_IO_TYPE_WRITE
);
1378 ret
= aac_build_sgraw2(cmd
, writecmd2
,
1379 dev
->scsi_host_ptr
->sg_tablesize
);
1382 command
= ContainerRawIo2
;
1383 fibsize
= struct_size(writecmd2
, sge
,
1384 le32_to_cpu(writecmd2
->sgeCnt
));
1386 struct aac_raw_io
*writecmd
;
1387 writecmd
= (struct aac_raw_io
*) fib_data(fib
);
1388 writecmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1389 writecmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1390 writecmd
->count
= cpu_to_le32(count
*
1391 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1392 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1393 writecmd
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1394 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1395 cpu_to_le16(RIO_TYPE_WRITE
|RIO_SUREWRITE
) :
1396 cpu_to_le16(RIO_TYPE_WRITE
);
1397 writecmd
->bpTotal
= 0;
1398 writecmd
->bpComplete
= 0;
1399 ret
= aac_build_sgraw(cmd
, &writecmd
->sg
);
1402 command
= ContainerRawIo
;
1403 fibsize
= sizeof(struct aac_raw_io
) +
1404 (le32_to_cpu(writecmd
->sg
.count
) * sizeof(struct sgentryraw
));
1407 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1409 * Now send the Fib to the adapter
1411 return aac_fib_send(command
,
1416 (fib_callback
) io_callback
,
1420 static int aac_write_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1423 struct aac_write64
*writecmd
;
1427 writecmd
= (struct aac_write64
*) fib_data(fib
);
1428 writecmd
->command
= cpu_to_le32(VM_CtHostWrite64
);
1429 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1430 writecmd
->sector_count
= cpu_to_le16(count
);
1431 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1433 writecmd
->flags
= 0;
1435 ret
= aac_build_sg64(cmd
, &writecmd
->sg
);
1438 fibsize
= sizeof(struct aac_write64
) +
1439 (le32_to_cpu(writecmd
->sg
.count
) *
1440 sizeof (struct sgentry64
));
1441 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1442 sizeof(struct aac_fibhdr
)));
1444 * Now send the Fib to the adapter
1446 return aac_fib_send(ContainerCommand64
,
1451 (fib_callback
) io_callback
,
1455 static int aac_write_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1458 struct aac_write
*writecmd
;
1459 struct aac_dev
*dev
= fib
->dev
;
1463 writecmd
= (struct aac_write
*) fib_data(fib
);
1464 writecmd
->command
= cpu_to_le32(VM_CtBlockWrite
);
1465 writecmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1466 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1467 writecmd
->count
= cpu_to_le32(count
*
1468 dev
->fsa_dev
[scmd_id(cmd
)].block_size
);
1469 writecmd
->sg
.count
= cpu_to_le32(1);
1470 /* ->stable is not used - it did mean which type of write */
1472 ret
= aac_build_sg(cmd
, &writecmd
->sg
);
1475 fibsize
= sizeof(struct aac_write
) +
1476 (le32_to_cpu(writecmd
->sg
.count
) *
1477 sizeof (struct sgentry
));
1478 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1479 sizeof(struct aac_fibhdr
)));
1481 * Now send the Fib to the adapter
1483 return aac_fib_send(ContainerCommand
,
1488 (fib_callback
) io_callback
,
1492 static struct aac_srb
* aac_scsi_common(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1494 struct aac_srb
* srbcmd
;
1497 struct aac_dev
*dev
= fib
->dev
;
1500 switch(cmd
->sc_data_direction
){
1504 case DMA_BIDIRECTIONAL
:
1505 flag
= SRB_DataIn
| SRB_DataOut
;
1507 case DMA_FROM_DEVICE
:
1511 default: /* shuts up some versions of gcc */
1512 flag
= SRB_NoDataXfer
;
1516 srbcmd
= (struct aac_srb
*) fib_data(fib
);
1517 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1518 srbcmd
->channel
= cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd
)));
1519 srbcmd
->id
= cpu_to_le32(scmd_id(cmd
));
1520 srbcmd
->lun
= cpu_to_le32(cmd
->device
->lun
);
1521 srbcmd
->flags
= cpu_to_le32(flag
);
1522 timeout
= scsi_cmd_to_rq(cmd
)->timeout
/ HZ
;
1524 timeout
= (dev
->sa_firmware
? AAC_SA_TIMEOUT
: AAC_ARC_TIMEOUT
);
1525 srbcmd
->timeout
= cpu_to_le32(timeout
); // timeout in seconds
1526 srbcmd
->retry_limit
= 0; /* Obsolete parameter */
1527 srbcmd
->cdb_size
= cpu_to_le32(cmd
->cmd_len
);
1531 static struct aac_hba_cmd_req
*aac_construct_hbacmd(struct fib
*fib
,
1532 struct scsi_cmnd
*cmd
)
1534 struct aac_hba_cmd_req
*hbacmd
;
1535 struct aac_dev
*dev
;
1539 dev
= (struct aac_dev
*)cmd
->device
->host
->hostdata
;
1541 hbacmd
= (struct aac_hba_cmd_req
*)fib
->hw_fib_va
;
1542 memset(hbacmd
, 0, 96); /* sizeof(*hbacmd) is not necessary */
1543 /* iu_type is a parameter of aac_hba_send */
1544 switch (cmd
->sc_data_direction
) {
1548 case DMA_FROM_DEVICE
:
1549 case DMA_BIDIRECTIONAL
:
1556 hbacmd
->lun
[1] = cpu_to_le32(cmd
->device
->lun
);
1558 bus
= aac_logical_to_phys(scmd_channel(cmd
));
1559 target
= scmd_id(cmd
);
1560 hbacmd
->it_nexus
= dev
->hba_map
[bus
][target
].rmw_nexus
;
1562 /* we fill in reply_qid later in aac_src_deliver_message */
1563 /* we fill in iu_type, request_id later in aac_hba_send */
1564 /* we fill in emb_data_desc_count later in aac_build_sghba */
1566 memcpy(hbacmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1567 hbacmd
->data_length
= cpu_to_le32(scsi_bufflen(cmd
));
1569 address
= (u64
)fib
->hw_error_pa
;
1570 hbacmd
->error_ptr_hi
= cpu_to_le32((u32
)(address
>> 32));
1571 hbacmd
->error_ptr_lo
= cpu_to_le32((u32
)(address
& 0xffffffff));
1572 hbacmd
->error_length
= cpu_to_le32(FW_ERROR_BUFFER_SIZE
);
1577 static void aac_srb_callback(void *context
, struct fib
* fibptr
);
1579 static int aac_scsi_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1582 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1585 ret
= aac_build_sg64(cmd
, (struct sgmap64
*) &srbcmd
->sg
);
1588 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1590 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1591 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1593 * Build Scatter/Gather list
1595 fibsize
= sizeof(struct aac_srb
) +
1596 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1597 sizeof(struct sgentry64
));
1598 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1599 sizeof(struct aac_fibhdr
)));
1602 * Now send the Fib to the adapter
1604 return aac_fib_send(ScsiPortCommand64
, fib
,
1605 fibsize
, FsaNormal
, 0, 1,
1606 (fib_callback
) aac_srb_callback
,
1610 static int aac_scsi_32(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1613 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1616 ret
= aac_build_sg(cmd
, (struct sgmap
*)&srbcmd
->sg
);
1619 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1621 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1622 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1624 * Build Scatter/Gather list
1626 fibsize
= sizeof (struct aac_srb
) +
1627 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1628 sizeof (struct sgentry
));
1629 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1630 sizeof(struct aac_fibhdr
)));
1633 * Now send the Fib to the adapter
1635 return aac_fib_send(ScsiPortCommand
, fib
, fibsize
, FsaNormal
, 0, 1,
1636 (fib_callback
) aac_srb_callback
, (void *) cmd
);
1639 static int aac_scsi_32_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1641 if ((sizeof(dma_addr_t
) > 4) && fib
->dev
->needs_dac
&&
1642 (fib
->dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
))
1644 return aac_scsi_32(fib
, cmd
);
1647 static int aac_adapter_hba(struct fib
*fib
, struct scsi_cmnd
*cmd
)
1649 struct aac_hba_cmd_req
*hbacmd
= aac_construct_hbacmd(fib
, cmd
);
1650 struct aac_dev
*dev
;
1653 dev
= (struct aac_dev
*)cmd
->device
->host
->hostdata
;
1655 ret
= aac_build_sghba(cmd
, hbacmd
,
1656 dev
->scsi_host_ptr
->sg_tablesize
, (u64
)fib
->hw_sgl_pa
);
1661 * Now send the HBA command to the adapter
1663 fib
->hbacmd_size
= 64 + le32_to_cpu(hbacmd
->emb_data_desc_count
) *
1664 sizeof(struct aac_hba_sgl
);
1666 return aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ
, fib
,
1667 (fib_callback
) aac_hba_callback
,
1671 static int aac_send_safw_bmic_cmd(struct aac_dev
*dev
,
1672 struct aac_srb_unit
*srbu
, void *xfer_buf
, int xfer_len
)
1678 struct aac_srb
*srb
;
1679 struct aac_srb_reply
*srb_reply
;
1680 struct sgmap64
*sg64
;
1684 if (!dev
->sa_firmware
)
1688 fibptr
= aac_fib_alloc(dev
);
1692 aac_fib_init(fibptr
);
1693 fibptr
->hw_fib_va
->header
.XferState
&=
1694 ~cpu_to_le32(FastResponseCapable
);
1696 fibsize
= sizeof(struct aac_srb
) + sizeof(struct sgentry64
);
1698 /* allocate DMA buffer for response */
1699 addr
= dma_map_single(&dev
->pdev
->dev
, xfer_buf
, xfer_len
,
1701 if (dma_mapping_error(&dev
->pdev
->dev
, addr
)) {
1706 srb
= fib_data(fibptr
);
1707 memcpy(srb
, &srbu
->srb
, sizeof(struct aac_srb
));
1709 vbus
= (u32
)le16_to_cpu(
1710 dev
->supplement_adapter_info
.virt_device_bus
);
1711 vid
= (u32
)le16_to_cpu(
1712 dev
->supplement_adapter_info
.virt_device_target
);
1714 /* set the common request fields */
1715 srb
->channel
= cpu_to_le32(vbus
);
1716 srb
->id
= cpu_to_le32(vid
);
1718 srb
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1720 srb
->retry_limit
= 0;
1721 srb
->cdb_size
= cpu_to_le32(16);
1722 srb
->count
= cpu_to_le32(xfer_len
);
1724 sg64
= (struct sgmap64
*)&srb
->sg
;
1725 sg64
->count
= cpu_to_le32(1);
1726 sg64
->sg
[0].addr
[1] = cpu_to_le32(upper_32_bits(addr
));
1727 sg64
->sg
[0].addr
[0] = cpu_to_le32(lower_32_bits(addr
));
1728 sg64
->sg
[0].count
= cpu_to_le32(xfer_len
);
1731 * Copy the updated data for other dumping or other usage if needed
1733 memcpy(&srbu
->srb
, srb
, sizeof(struct aac_srb
));
1735 /* issue request to the controller */
1736 rcode
= aac_fib_send(ScsiPortCommand64
, fibptr
, fibsize
, FsaNormal
,
1739 if (rcode
== -ERESTARTSYS
)
1742 if (unlikely(rcode
< 0))
1745 srb_reply
= (struct aac_srb_reply
*)fib_data(fibptr
);
1746 memcpy(&srbu
->srb_reply
, srb_reply
, sizeof(struct aac_srb_reply
));
1749 dma_unmap_single(&dev
->pdev
->dev
, addr
, xfer_len
, DMA_BIDIRECTIONAL
);
1751 aac_fib_complete(fibptr
);
1752 aac_fib_free(fibptr
);
1756 static void aac_set_safw_target_qd(struct aac_dev
*dev
, int bus
, int target
)
1759 struct aac_ciss_identify_pd
*identify_resp
;
1761 if (dev
->hba_map
[bus
][target
].devtype
!= AAC_DEVTYPE_NATIVE_RAW
)
1764 identify_resp
= dev
->hba_map
[bus
][target
].safw_identify_resp
;
1765 if (identify_resp
== NULL
) {
1766 dev
->hba_map
[bus
][target
].qd_limit
= 32;
1770 if (identify_resp
->current_queue_depth_limit
<= 0 ||
1771 identify_resp
->current_queue_depth_limit
> 255)
1772 dev
->hba_map
[bus
][target
].qd_limit
= 32;
1774 dev
->hba_map
[bus
][target
].qd_limit
=
1775 identify_resp
->current_queue_depth_limit
;
1778 static int aac_issue_safw_bmic_identify(struct aac_dev
*dev
,
1779 struct aac_ciss_identify_pd
**identify_resp
, u32 bus
, u32 target
)
1781 int rcode
= -ENOMEM
;
1783 struct aac_srb_unit srbu
;
1784 struct aac_srb
*srbcmd
;
1785 struct aac_ciss_identify_pd
*identify_reply
;
1787 datasize
= sizeof(struct aac_ciss_identify_pd
);
1788 identify_reply
= kmalloc(datasize
, GFP_KERNEL
);
1789 if (!identify_reply
)
1792 memset(&srbu
, 0, sizeof(struct aac_srb_unit
));
1795 srbcmd
->flags
= cpu_to_le32(SRB_DataIn
);
1796 srbcmd
->cdb
[0] = 0x26;
1797 srbcmd
->cdb
[2] = (u8
)((AAC_MAX_LUN
+ target
) & 0x00FF);
1798 srbcmd
->cdb
[6] = CISS_IDENTIFY_PHYSICAL_DEVICE
;
1800 rcode
= aac_send_safw_bmic_cmd(dev
, &srbu
, identify_reply
, datasize
);
1801 if (unlikely(rcode
< 0))
1804 *identify_resp
= identify_reply
;
1809 kfree(identify_reply
);
1813 static inline void aac_free_safw_ciss_luns(struct aac_dev
*dev
)
1815 kfree(dev
->safw_phys_luns
);
1816 dev
->safw_phys_luns
= NULL
;
1820 * aac_get_safw_ciss_luns() - Process topology change
1821 * @dev: aac_dev structure
1823 * Execute a CISS REPORT PHYS LUNS and process the results into
1824 * the current hba_map.
1826 static int aac_get_safw_ciss_luns(struct aac_dev
*dev
)
1828 int rcode
= -ENOMEM
;
1830 struct aac_srb
*srbcmd
;
1831 struct aac_srb_unit srbu
;
1832 struct aac_ciss_phys_luns_resp
*phys_luns
;
1834 datasize
= sizeof(struct aac_ciss_phys_luns_resp
) +
1835 AAC_MAX_TARGETS
* sizeof(struct _ciss_lun
);
1836 phys_luns
= kmalloc(datasize
, GFP_KERNEL
);
1837 if (phys_luns
== NULL
)
1840 memset(&srbu
, 0, sizeof(struct aac_srb_unit
));
1843 srbcmd
->flags
= cpu_to_le32(SRB_DataIn
);
1844 srbcmd
->cdb
[0] = CISS_REPORT_PHYSICAL_LUNS
;
1845 srbcmd
->cdb
[1] = 2; /* extended reporting */
1846 srbcmd
->cdb
[8] = (u8
)(datasize
>> 8);
1847 srbcmd
->cdb
[9] = (u8
)(datasize
);
1849 rcode
= aac_send_safw_bmic_cmd(dev
, &srbu
, phys_luns
, datasize
);
1850 if (unlikely(rcode
< 0))
1853 if (phys_luns
->resp_flag
!= 2) {
1858 dev
->safw_phys_luns
= phys_luns
;
1867 static inline u32
aac_get_safw_phys_lun_count(struct aac_dev
*dev
)
1869 return get_unaligned_be32(&dev
->safw_phys_luns
->list_length
[0])/24;
1872 static inline u32
aac_get_safw_phys_bus(struct aac_dev
*dev
, int lun
)
1874 return dev
->safw_phys_luns
->lun
[lun
].level2
[1] & 0x3f;
1877 static inline u32
aac_get_safw_phys_target(struct aac_dev
*dev
, int lun
)
1879 return dev
->safw_phys_luns
->lun
[lun
].level2
[0];
1882 static inline u32
aac_get_safw_phys_expose_flag(struct aac_dev
*dev
, int lun
)
1884 return dev
->safw_phys_luns
->lun
[lun
].bus
>> 6;
1887 static inline u32
aac_get_safw_phys_attribs(struct aac_dev
*dev
, int lun
)
1889 return dev
->safw_phys_luns
->lun
[lun
].node_ident
[9];
1892 static inline u32
aac_get_safw_phys_nexus(struct aac_dev
*dev
, int lun
)
1894 return *((u32
*)&dev
->safw_phys_luns
->lun
[lun
].node_ident
[12]);
1897 static inline void aac_free_safw_identify_resp(struct aac_dev
*dev
,
1898 int bus
, int target
)
1900 kfree(dev
->hba_map
[bus
][target
].safw_identify_resp
);
1901 dev
->hba_map
[bus
][target
].safw_identify_resp
= NULL
;
1904 static inline void aac_free_safw_all_identify_resp(struct aac_dev
*dev
,
1912 luns
= aac_get_safw_phys_lun_count(dev
);
1914 if (luns
< lun_count
)
1916 else if (lun_count
< 0)
1919 for (i
= 0; i
< lun_count
; i
++) {
1920 bus
= aac_get_safw_phys_bus(dev
, i
);
1921 target
= aac_get_safw_phys_target(dev
, i
);
1923 aac_free_safw_identify_resp(dev
, bus
, target
);
1927 static int aac_get_safw_attr_all_targets(struct aac_dev
*dev
)
1934 struct aac_ciss_identify_pd
*identify_resp
= NULL
;
1936 lun_count
= aac_get_safw_phys_lun_count(dev
);
1938 for (i
= 0; i
< lun_count
; ++i
) {
1940 bus
= aac_get_safw_phys_bus(dev
, i
);
1941 target
= aac_get_safw_phys_target(dev
, i
);
1943 rcode
= aac_issue_safw_bmic_identify(dev
,
1944 &identify_resp
, bus
, target
);
1946 if (unlikely(rcode
< 0))
1947 goto free_identify_resp
;
1949 dev
->hba_map
[bus
][target
].safw_identify_resp
= identify_resp
;
1955 aac_free_safw_all_identify_resp(dev
, i
);
1960 * aac_set_safw_attr_all_targets- update current hba map with data from FW
1961 * @dev: aac_dev structure
1963 * Update our hba map with the information gathered from the FW
1965 static void aac_set_safw_attr_all_targets(struct aac_dev
*dev
)
1967 /* ok and extended reporting */
1968 u32 lun_count
, nexus
;
1970 u8 expose_flag
, attribs
;
1972 lun_count
= aac_get_safw_phys_lun_count(dev
);
1974 dev
->scan_counter
++;
1976 for (i
= 0; i
< lun_count
; ++i
) {
1978 bus
= aac_get_safw_phys_bus(dev
, i
);
1979 target
= aac_get_safw_phys_target(dev
, i
);
1980 expose_flag
= aac_get_safw_phys_expose_flag(dev
, i
);
1981 attribs
= aac_get_safw_phys_attribs(dev
, i
);
1982 nexus
= aac_get_safw_phys_nexus(dev
, i
);
1984 if (bus
>= AAC_MAX_BUSES
|| target
>= AAC_MAX_TARGETS
)
1987 if (expose_flag
!= 0) {
1988 dev
->hba_map
[bus
][target
].devtype
=
1989 AAC_DEVTYPE_RAID_MEMBER
;
1993 if (nexus
!= 0 && (attribs
& 8)) {
1994 dev
->hba_map
[bus
][target
].devtype
=
1995 AAC_DEVTYPE_NATIVE_RAW
;
1996 dev
->hba_map
[bus
][target
].rmw_nexus
=
1999 dev
->hba_map
[bus
][target
].devtype
=
2000 AAC_DEVTYPE_ARC_RAW
;
2002 dev
->hba_map
[bus
][target
].scan_counter
= dev
->scan_counter
;
2004 aac_set_safw_target_qd(dev
, bus
, target
);
2008 static int aac_setup_safw_targets(struct aac_dev
*dev
)
2012 rcode
= aac_get_containers(dev
);
2013 if (unlikely(rcode
< 0))
2016 rcode
= aac_get_safw_ciss_luns(dev
);
2017 if (unlikely(rcode
< 0))
2020 rcode
= aac_get_safw_attr_all_targets(dev
);
2021 if (unlikely(rcode
< 0))
2022 goto free_ciss_luns
;
2024 aac_set_safw_attr_all_targets(dev
);
2026 aac_free_safw_all_identify_resp(dev
, -1);
2028 aac_free_safw_ciss_luns(dev
);
2033 int aac_setup_safw_adapter(struct aac_dev
*dev
)
2035 return aac_setup_safw_targets(dev
);
2038 int aac_get_adapter_info(struct aac_dev
* dev
)
2042 u32 tmp
, bus
, target
;
2043 struct aac_adapter_info
*info
;
2044 struct aac_bus_info
*command
;
2045 struct aac_bus_info_response
*bus_info
;
2047 if (!(fibptr
= aac_fib_alloc(dev
)))
2050 aac_fib_init(fibptr
);
2051 info
= (struct aac_adapter_info
*) fib_data(fibptr
);
2052 memset(info
,0,sizeof(*info
));
2054 rcode
= aac_fib_send(RequestAdapterInfo
,
2058 -1, 1, /* First `interrupt' command uses special wait */
2063 /* FIB should be freed only after
2064 * getting the response from the F/W */
2065 if (rcode
!= -ERESTARTSYS
) {
2066 aac_fib_complete(fibptr
);
2067 aac_fib_free(fibptr
);
2071 memcpy(&dev
->adapter_info
, info
, sizeof(*info
));
2073 dev
->supplement_adapter_info
.virt_device_bus
= 0xffff;
2074 if (dev
->adapter_info
.options
& AAC_OPT_SUPPLEMENT_ADAPTER_INFO
) {
2075 struct aac_supplement_adapter_info
* sinfo
;
2077 aac_fib_init(fibptr
);
2079 sinfo
= (struct aac_supplement_adapter_info
*) fib_data(fibptr
);
2081 memset(sinfo
,0,sizeof(*sinfo
));
2083 rcode
= aac_fib_send(RequestSupplementAdapterInfo
,
2092 memcpy(&dev
->supplement_adapter_info
, sinfo
, sizeof(*sinfo
));
2093 if (rcode
== -ERESTARTSYS
) {
2094 fibptr
= aac_fib_alloc(dev
);
2101 /* reset all previous mapped devices (i.e. for init. after IOP_RESET) */
2102 for (bus
= 0; bus
< AAC_MAX_BUSES
; bus
++) {
2103 for (target
= 0; target
< AAC_MAX_TARGETS
; target
++) {
2104 dev
->hba_map
[bus
][target
].devtype
= 0;
2105 dev
->hba_map
[bus
][target
].qd_limit
= 0;
2113 aac_fib_init(fibptr
);
2115 bus_info
= (struct aac_bus_info_response
*) fib_data(fibptr
);
2117 memset(bus_info
, 0, sizeof(*bus_info
));
2119 command
= (struct aac_bus_info
*)bus_info
;
2121 command
->Command
= cpu_to_le32(VM_Ioctl
);
2122 command
->ObjType
= cpu_to_le32(FT_DRIVE
);
2123 command
->MethodId
= cpu_to_le32(1);
2124 command
->CtlCmd
= cpu_to_le32(GetBusInfo
);
2126 rcode
= aac_fib_send(ContainerCommand
,
2133 /* reasoned default */
2134 dev
->maximum_num_physicals
= 16;
2135 if (rcode
>= 0 && le32_to_cpu(bus_info
->Status
) == ST_OK
) {
2136 dev
->maximum_num_physicals
= le32_to_cpu(bus_info
->TargetsPerBus
);
2137 dev
->maximum_num_channels
= le32_to_cpu(bus_info
->BusCount
);
2140 if (!dev
->in_reset
) {
2142 tmp
= le32_to_cpu(dev
->adapter_info
.kernelrev
);
2143 printk(KERN_INFO
"%s%d: kernel %d.%d-%d[%d] %.*s\n",
2149 le32_to_cpu(dev
->adapter_info
.kernelbuild
),
2150 (int)sizeof(dev
->supplement_adapter_info
.build_date
),
2151 dev
->supplement_adapter_info
.build_date
);
2152 tmp
= le32_to_cpu(dev
->adapter_info
.monitorrev
);
2153 printk(KERN_INFO
"%s%d: monitor %d.%d-%d[%d]\n",
2155 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
2156 le32_to_cpu(dev
->adapter_info
.monitorbuild
));
2157 tmp
= le32_to_cpu(dev
->adapter_info
.biosrev
);
2158 printk(KERN_INFO
"%s%d: bios %d.%d-%d[%d]\n",
2160 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
2161 le32_to_cpu(dev
->adapter_info
.biosbuild
));
2163 if (aac_get_serial_number(
2164 shost_to_class(dev
->scsi_host_ptr
), buffer
))
2165 printk(KERN_INFO
"%s%d: serial %s",
2166 dev
->name
, dev
->id
, buffer
);
2167 if (dev
->supplement_adapter_info
.vpd_info
.tsid
[0]) {
2168 printk(KERN_INFO
"%s%d: TSID %.*s\n",
2170 (int)sizeof(dev
->supplement_adapter_info
2172 dev
->supplement_adapter_info
.vpd_info
.tsid
);
2174 if (!aac_check_reset
|| ((aac_check_reset
== 1) &&
2175 (dev
->supplement_adapter_info
.supported_options2
&
2176 AAC_OPTION_IGNORE_RESET
))) {
2177 printk(KERN_INFO
"%s%d: Reset Adapter Ignored\n",
2178 dev
->name
, dev
->id
);
2182 dev
->cache_protected
= 0;
2183 dev
->jbod
= ((dev
->supplement_adapter_info
.feature_bits
&
2184 AAC_FEATURE_JBOD
) != 0);
2185 dev
->nondasd_support
= 0;
2186 dev
->raid_scsi_mode
= 0;
2187 if(dev
->adapter_info
.options
& AAC_OPT_NONDASD
)
2188 dev
->nondasd_support
= 1;
2191 * If the firmware supports ROMB RAID/SCSI mode and we are currently
2192 * in RAID/SCSI mode, set the flag. For now if in this mode we will
2193 * force nondasd support on. If we decide to allow the non-dasd flag
2194 * additional changes changes will have to be made to support
2195 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
2196 * changed to support the new dev->raid_scsi_mode flag instead of
2197 * leaching off of the dev->nondasd_support flag. Also in linit.c the
2198 * function aac_detect will have to be modified where it sets up the
2199 * max number of channels based on the aac->nondasd_support flag only.
2201 if ((dev
->adapter_info
.options
& AAC_OPT_SCSI_MANAGED
) &&
2202 (dev
->adapter_info
.options
& AAC_OPT_RAID_SCSI_MODE
)) {
2203 dev
->nondasd_support
= 1;
2204 dev
->raid_scsi_mode
= 1;
2206 if (dev
->raid_scsi_mode
!= 0)
2207 printk(KERN_INFO
"%s%d: ROMB RAID/SCSI mode enabled\n",
2208 dev
->name
, dev
->id
);
2211 dev
->nondasd_support
= (nondasd
!=0);
2212 if (dev
->nondasd_support
&& !dev
->in_reset
)
2213 printk(KERN_INFO
"%s%d: Non-DASD support enabled.\n",dev
->name
, dev
->id
);
2215 if (dma_get_required_mask(&dev
->pdev
->dev
) > DMA_BIT_MASK(32))
2217 dev
->dac_support
= 0;
2218 if ((sizeof(dma_addr_t
) > 4) && dev
->needs_dac
&&
2219 (dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
)) {
2221 printk(KERN_INFO
"%s%d: 64bit support enabled.\n",
2222 dev
->name
, dev
->id
);
2223 dev
->dac_support
= 1;
2227 dev
->dac_support
= (dacmode
!=0);
2230 /* avoid problems with AAC_QUIRK_SCSI_32 controllers */
2231 if (dev
->dac_support
&& (aac_get_driver_ident(dev
->cardtype
)->quirks
2232 & AAC_QUIRK_SCSI_32
)) {
2233 dev
->nondasd_support
= 0;
2235 expose_physicals
= 0;
2238 if (dev
->dac_support
) {
2239 if (!dma_set_mask(&dev
->pdev
->dev
, DMA_BIT_MASK(64))) {
2241 dev_info(&dev
->pdev
->dev
, "64 Bit DAC enabled\n");
2242 } else if (!dma_set_mask(&dev
->pdev
->dev
, DMA_BIT_MASK(32))) {
2243 dev_info(&dev
->pdev
->dev
, "DMA mask set failed, 64 Bit DAC disabled\n");
2244 dev
->dac_support
= 0;
2246 dev_info(&dev
->pdev
->dev
, "No suitable DMA available\n");
2251 * Deal with configuring for the individualized limits of each packet
2254 dev
->a_ops
.adapter_scsi
= (dev
->dac_support
)
2255 ? ((aac_get_driver_ident(dev
->cardtype
)->quirks
& AAC_QUIRK_SCSI_32
)
2259 if (dev
->raw_io_interface
) {
2260 dev
->a_ops
.adapter_bounds
= (dev
->raw_io_64
)
2263 dev
->a_ops
.adapter_read
= aac_read_raw_io
;
2264 dev
->a_ops
.adapter_write
= aac_write_raw_io
;
2266 dev
->a_ops
.adapter_bounds
= aac_bounds_32
;
2267 dev
->scsi_host_ptr
->sg_tablesize
= (dev
->max_fib_size
-
2268 sizeof(struct aac_fibhdr
) -
2269 sizeof(struct aac_write
)) /
2270 sizeof(struct sgentry
);
2271 if (dev
->dac_support
) {
2272 dev
->a_ops
.adapter_read
= aac_read_block64
;
2273 dev
->a_ops
.adapter_write
= aac_write_block64
;
2275 * 38 scatter gather elements
2277 dev
->scsi_host_ptr
->sg_tablesize
=
2278 (dev
->max_fib_size
-
2279 sizeof(struct aac_fibhdr
) -
2280 sizeof(struct aac_write64
)) /
2281 sizeof(struct sgentry64
);
2283 dev
->a_ops
.adapter_read
= aac_read_block
;
2284 dev
->a_ops
.adapter_write
= aac_write_block
;
2286 dev
->scsi_host_ptr
->max_sectors
= AAC_MAX_32BIT_SGBCOUNT
;
2287 if (!(dev
->adapter_info
.options
& AAC_OPT_NEW_COMM
)) {
2289 * Worst case size that could cause sg overflow when
2290 * we break up SG elements that are larger than 64KB.
2291 * Would be nice if we could tell the SCSI layer what
2292 * the maximum SG element size can be. Worst case is
2293 * (sg_tablesize-1) 4KB elements with one 64KB
2295 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
2297 dev
->scsi_host_ptr
->max_sectors
=
2298 (dev
->scsi_host_ptr
->sg_tablesize
* 8) + 112;
2301 if (!dev
->sync_mode
&& dev
->sa_firmware
&&
2302 dev
->scsi_host_ptr
->sg_tablesize
> HBA_MAX_SG_SEPARATE
)
2303 dev
->scsi_host_ptr
->sg_tablesize
= dev
->sg_tablesize
=
2304 HBA_MAX_SG_SEPARATE
;
2306 /* FIB should be freed only after getting the response from the F/W */
2307 if (rcode
!= -ERESTARTSYS
) {
2308 aac_fib_complete(fibptr
);
2309 aac_fib_free(fibptr
);
2316 static void io_callback(void *context
, struct fib
* fibptr
)
2318 struct aac_dev
*dev
;
2319 struct aac_read_reply
*readreply
;
2320 struct scsi_cmnd
*scsicmd
;
2323 scsicmd
= (struct scsi_cmnd
*) context
;
2325 if (!aac_valid_context(scsicmd
, fibptr
))
2329 cid
= scmd_id(scsicmd
);
2331 if (nblank(dprintk(x
))) {
2333 switch (scsicmd
->cmnd
[0]) {
2336 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
2337 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2341 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2342 ((u64
)scsicmd
->cmnd
[3] << 48) |
2343 ((u64
)scsicmd
->cmnd
[4] << 40) |
2344 ((u64
)scsicmd
->cmnd
[5] << 32) |
2345 ((u64
)scsicmd
->cmnd
[6] << 24) |
2346 (scsicmd
->cmnd
[7] << 16) |
2347 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2351 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2352 (scsicmd
->cmnd
[3] << 16) |
2353 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2356 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2357 (scsicmd
->cmnd
[3] << 16) |
2358 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2362 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
2363 smp_processor_id(), (unsigned long long)lba
, jiffies
);
2366 BUG_ON(fibptr
== NULL
);
2368 scsi_dma_unmap(scsicmd
);
2370 readreply
= (struct aac_read_reply
*)fib_data(fibptr
);
2371 switch (le32_to_cpu(readreply
->status
)) {
2373 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2374 dev
->fsa_dev
[cid
].sense_data
.sense_key
= NO_SENSE
;
2377 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2378 set_sense(&dev
->fsa_dev
[cid
].sense_data
, NOT_READY
,
2379 SENCODE_BECOMING_READY
, ASENCODE_BECOMING_READY
, 0, 0);
2380 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2381 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2382 SCSI_SENSE_BUFFERSIZE
));
2385 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2386 set_sense(&dev
->fsa_dev
[cid
].sense_data
, MEDIUM_ERROR
,
2387 SENCODE_UNRECOVERED_READ_ERROR
, ASENCODE_NO_SENSE
, 0, 0);
2388 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2389 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2390 SCSI_SENSE_BUFFERSIZE
));
2393 #ifdef AAC_DETAILED_STATUS_INFO
2394 printk(KERN_WARNING
"io_callback: io failed, status = %d\n",
2395 le32_to_cpu(readreply
->status
));
2397 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2398 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2399 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2400 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2401 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2402 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2403 SCSI_SENSE_BUFFERSIZE
));
2406 aac_fib_complete(fibptr
);
2408 aac_scsi_done(scsicmd
);
2411 static int aac_read(struct scsi_cmnd
* scsicmd
)
2416 struct aac_dev
*dev
;
2417 struct fib
* cmd_fibcontext
;
2420 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2422 * Get block address and transfer length
2424 switch (scsicmd
->cmnd
[0]) {
2426 dprintk((KERN_DEBUG
"aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd
)));
2428 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
2429 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2430 count
= scsicmd
->cmnd
[4];
2436 dprintk((KERN_DEBUG
"aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd
)));
2438 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2439 ((u64
)scsicmd
->cmnd
[3] << 48) |
2440 ((u64
)scsicmd
->cmnd
[4] << 40) |
2441 ((u64
)scsicmd
->cmnd
[5] << 32) |
2442 ((u64
)scsicmd
->cmnd
[6] << 24) |
2443 (scsicmd
->cmnd
[7] << 16) |
2444 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2445 count
= (scsicmd
->cmnd
[10] << 24) |
2446 (scsicmd
->cmnd
[11] << 16) |
2447 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
2450 dprintk((KERN_DEBUG
"aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd
)));
2452 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2453 (scsicmd
->cmnd
[3] << 16) |
2454 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2455 count
= (scsicmd
->cmnd
[6] << 24) |
2456 (scsicmd
->cmnd
[7] << 16) |
2457 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2460 dprintk((KERN_DEBUG
"aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd
)));
2462 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
2463 (scsicmd
->cmnd
[3] << 16) |
2464 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2465 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2469 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
2470 cid
= scmd_id(scsicmd
);
2471 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
2472 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2473 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2474 ILLEGAL_REQUEST
, SENCODE_LBA_OUT_OF_RANGE
,
2475 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2476 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2477 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2478 SCSI_SENSE_BUFFERSIZE
));
2479 aac_scsi_done(scsicmd
);
2483 dprintk((KERN_DEBUG
"aac_read[cpu %d]: lba = %llu, t = %ld.\n",
2484 smp_processor_id(), (unsigned long long)lba
, jiffies
));
2485 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
2488 * Alocate and initialize a Fib
2490 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
2491 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
2492 status
= aac_adapter_read(cmd_fibcontext
, scsicmd
, lba
, count
);
2495 * Check that the command queued to the controller
2497 if (status
== -EINPROGRESS
)
2500 printk(KERN_WARNING
"aac_read: aac_fib_send failed with status: %d.\n", status
);
2502 * For some reason, the Fib didn't queue, return QUEUE_FULL
2504 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_TASK_SET_FULL
;
2505 aac_scsi_done(scsicmd
);
2506 aac_fib_complete(cmd_fibcontext
);
2507 aac_fib_free(cmd_fibcontext
);
2511 static int aac_write(struct scsi_cmnd
* scsicmd
)
2517 struct aac_dev
*dev
;
2518 struct fib
* cmd_fibcontext
;
2521 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2523 * Get block address and transfer length
2525 if (scsicmd
->cmnd
[0] == WRITE_6
) /* 6 byte command */
2527 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) | (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
2528 count
= scsicmd
->cmnd
[4];
2532 } else if (scsicmd
->cmnd
[0] == WRITE_16
) { /* 16 byte command */
2533 dprintk((KERN_DEBUG
"aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd
)));
2535 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
2536 ((u64
)scsicmd
->cmnd
[3] << 48) |
2537 ((u64
)scsicmd
->cmnd
[4] << 40) |
2538 ((u64
)scsicmd
->cmnd
[5] << 32) |
2539 ((u64
)scsicmd
->cmnd
[6] << 24) |
2540 (scsicmd
->cmnd
[7] << 16) |
2541 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2542 count
= (scsicmd
->cmnd
[10] << 24) | (scsicmd
->cmnd
[11] << 16) |
2543 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
2544 fua
= scsicmd
->cmnd
[1] & 0x8;
2545 } else if (scsicmd
->cmnd
[0] == WRITE_12
) { /* 12 byte command */
2546 dprintk((KERN_DEBUG
"aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd
)));
2548 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16)
2549 | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2550 count
= (scsicmd
->cmnd
[6] << 24) | (scsicmd
->cmnd
[7] << 16)
2551 | (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
2552 fua
= scsicmd
->cmnd
[1] & 0x8;
2554 dprintk((KERN_DEBUG
"aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd
)));
2555 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
2556 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
2557 fua
= scsicmd
->cmnd
[1] & 0x8;
2560 if ((lba
+ count
) > (dev
->fsa_dev
[scmd_id(scsicmd
)].size
)) {
2561 cid
= scmd_id(scsicmd
);
2562 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
2563 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2564 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2565 ILLEGAL_REQUEST
, SENCODE_LBA_OUT_OF_RANGE
,
2566 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2567 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2568 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2569 SCSI_SENSE_BUFFERSIZE
));
2570 aac_scsi_done(scsicmd
);
2574 dprintk((KERN_DEBUG
"aac_write[cpu %d]: lba = %llu, t = %ld.\n",
2575 smp_processor_id(), (unsigned long long)lba
, jiffies
));
2576 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
2579 * Allocate and initialize a Fib then setup a BlockWrite command
2581 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
2582 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
2583 status
= aac_adapter_write(cmd_fibcontext
, scsicmd
, lba
, count
, fua
);
2586 * Check that the command queued to the controller
2588 if (status
== -EINPROGRESS
)
2591 printk(KERN_WARNING
"aac_write: aac_fib_send failed with status: %d\n", status
);
2593 * For some reason, the Fib didn't queue, return QUEUE_FULL
2595 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_TASK_SET_FULL
;
2596 aac_scsi_done(scsicmd
);
2598 aac_fib_complete(cmd_fibcontext
);
2599 aac_fib_free(cmd_fibcontext
);
2603 static void synchronize_callback(void *context
, struct fib
*fibptr
)
2605 struct aac_synchronize_reply
*synchronizereply
;
2606 struct scsi_cmnd
*cmd
= context
;
2608 if (!aac_valid_context(cmd
, fibptr
))
2611 dprintk((KERN_DEBUG
"synchronize_callback[cpu %d]: t = %ld.\n",
2612 smp_processor_id(), jiffies
));
2613 BUG_ON(fibptr
== NULL
);
2616 synchronizereply
= fib_data(fibptr
);
2617 if (le32_to_cpu(synchronizereply
->status
) == CT_OK
)
2618 cmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2620 struct scsi_device
*sdev
= cmd
->device
;
2621 struct aac_dev
*dev
= fibptr
->dev
;
2622 u32 cid
= sdev_id(sdev
);
2624 "synchronize_callback: synchronize failed, status = %d\n",
2625 le32_to_cpu(synchronizereply
->status
));
2626 cmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2627 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2628 HARDWARE_ERROR
, SENCODE_INTERNAL_TARGET_FAILURE
,
2629 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0);
2630 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2631 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2632 SCSI_SENSE_BUFFERSIZE
));
2635 aac_fib_complete(fibptr
);
2636 aac_fib_free(fibptr
);
2640 static int aac_synchronize(struct scsi_cmnd
*scsicmd
)
2643 struct fib
*cmd_fibcontext
;
2644 struct aac_synchronize
*synchronizecmd
;
2645 struct scsi_device
*sdev
= scsicmd
->device
;
2646 struct aac_dev
*aac
;
2648 aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2650 return SCSI_MLQUEUE_HOST_BUSY
;
2653 * Allocate and initialize a Fib
2655 cmd_fibcontext
= aac_fib_alloc_tag(aac
, scsicmd
);
2657 aac_fib_init(cmd_fibcontext
);
2659 synchronizecmd
= fib_data(cmd_fibcontext
);
2660 synchronizecmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2661 synchronizecmd
->type
= cpu_to_le32(CT_FLUSH_CACHE
);
2662 synchronizecmd
->cid
= cpu_to_le32(scmd_id(scsicmd
));
2663 synchronizecmd
->count
=
2664 cpu_to_le32(sizeof(((struct aac_synchronize_reply
*)NULL
)->data
));
2665 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
2668 * Now send the Fib to the adapter
2670 status
= aac_fib_send(ContainerCommand
,
2672 sizeof(struct aac_synchronize
),
2675 (fib_callback
)synchronize_callback
,
2679 * Check that the command queued to the controller
2681 if (status
== -EINPROGRESS
)
2685 "aac_synchronize: aac_fib_send failed with status: %d.\n", status
);
2686 aac_fib_complete(cmd_fibcontext
);
2687 aac_fib_free(cmd_fibcontext
);
2688 return SCSI_MLQUEUE_HOST_BUSY
;
2691 static void aac_start_stop_callback(void *context
, struct fib
*fibptr
)
2693 struct scsi_cmnd
*scsicmd
= context
;
2695 if (!aac_valid_context(scsicmd
, fibptr
))
2698 BUG_ON(fibptr
== NULL
);
2700 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2702 aac_fib_complete(fibptr
);
2703 aac_fib_free(fibptr
);
2704 aac_scsi_done(scsicmd
);
2707 static int aac_start_stop(struct scsi_cmnd
*scsicmd
)
2710 struct fib
*cmd_fibcontext
;
2711 struct aac_power_management
*pmcmd
;
2712 struct scsi_device
*sdev
= scsicmd
->device
;
2713 struct aac_dev
*aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
2715 if (!(aac
->supplement_adapter_info
.supported_options2
&
2716 AAC_OPTION_POWER_MANAGEMENT
)) {
2717 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2718 aac_scsi_done(scsicmd
);
2723 return SCSI_MLQUEUE_HOST_BUSY
;
2726 * Allocate and initialize a Fib
2728 cmd_fibcontext
= aac_fib_alloc_tag(aac
, scsicmd
);
2730 aac_fib_init(cmd_fibcontext
);
2732 pmcmd
= fib_data(cmd_fibcontext
);
2733 pmcmd
->command
= cpu_to_le32(VM_ContainerConfig
);
2734 pmcmd
->type
= cpu_to_le32(CT_POWER_MANAGEMENT
);
2735 /* Eject bit ignored, not relevant */
2736 pmcmd
->sub
= (scsicmd
->cmnd
[4] & 1) ?
2737 cpu_to_le32(CT_PM_START_UNIT
) : cpu_to_le32(CT_PM_STOP_UNIT
);
2738 pmcmd
->cid
= cpu_to_le32(sdev_id(sdev
));
2739 pmcmd
->parm
= (scsicmd
->cmnd
[1] & 1) ?
2740 cpu_to_le32(CT_PM_UNIT_IMMEDIATE
) : 0;
2741 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
2744 * Now send the Fib to the adapter
2746 status
= aac_fib_send(ContainerCommand
,
2748 sizeof(struct aac_power_management
),
2751 (fib_callback
)aac_start_stop_callback
,
2755 * Check that the command queued to the controller
2757 if (status
== -EINPROGRESS
)
2760 aac_fib_complete(cmd_fibcontext
);
2761 aac_fib_free(cmd_fibcontext
);
2762 return SCSI_MLQUEUE_HOST_BUSY
;
2766 * aac_scsi_cmd() - Process SCSI command
2767 * @scsicmd: SCSI command block
2769 * Emulate a SCSI command and queue the required request for the
2773 int aac_scsi_cmd(struct scsi_cmnd
* scsicmd
)
2776 struct Scsi_Host
*host
= scsicmd
->device
->host
;
2777 struct aac_dev
*dev
= (struct aac_dev
*)host
->hostdata
;
2778 struct fsa_dev_info
*fsa_dev_ptr
= dev
->fsa_dev
;
2780 if (fsa_dev_ptr
== NULL
)
2783 * If the bus, id or lun is out of range, return fail
2784 * Test does not apply to ID 16, the pseudo id for the controller
2787 cid
= scmd_id(scsicmd
);
2788 if (cid
!= host
->this_id
) {
2789 if (scmd_channel(scsicmd
) == CONTAINER_CHANNEL
) {
2790 if((cid
>= dev
->maximum_num_containers
) ||
2791 (scsicmd
->device
->lun
!= 0)) {
2792 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2797 * If the target container doesn't exist, it may have
2798 * been newly created
2800 if (((fsa_dev_ptr
[cid
].valid
& 1) == 0) ||
2801 (fsa_dev_ptr
[cid
].sense_data
.sense_key
==
2803 switch (scsicmd
->cmnd
[0]) {
2804 case SERVICE_ACTION_IN_16
:
2805 if (!(dev
->raw_io_interface
) ||
2806 !(dev
->raw_io_64
) ||
2807 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2812 case TEST_UNIT_READY
:
2815 return _aac_probe_container(scsicmd
,
2816 aac_probe_container_callback2
);
2821 } else { /* check for physical non-dasd devices */
2822 bus
= aac_logical_to_phys(scmd_channel(scsicmd
));
2824 if (bus
< AAC_MAX_BUSES
&& cid
< AAC_MAX_TARGETS
&&
2825 dev
->hba_map
[bus
][cid
].devtype
2826 == AAC_DEVTYPE_NATIVE_RAW
) {
2829 return aac_send_hba_fib(scsicmd
);
2830 } else if (dev
->nondasd_support
|| expose_physicals
||
2834 return aac_send_srb_fib(scsicmd
);
2836 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2842 * else Command for the controller itself
2844 else if ((scsicmd
->cmnd
[0] != INQUIRY
) && /* only INQUIRY & TUR cmnd supported for controller */
2845 (scsicmd
->cmnd
[0] != TEST_UNIT_READY
))
2847 dprintk((KERN_WARNING
"Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd
->cmnd
[0]));
2848 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2849 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2850 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2851 ASENCODE_INVALID_COMMAND
, 0, 0);
2852 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2853 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
2854 SCSI_SENSE_BUFFERSIZE
));
2858 switch (scsicmd
->cmnd
[0]) {
2865 return aac_read(scsicmd
);
2873 return aac_write(scsicmd
);
2875 case SYNCHRONIZE_CACHE
:
2876 if (((aac_cache
& 6) == 6) && dev
->cache_protected
) {
2877 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2880 /* Issue FIB to tell Firmware to flush it's cache */
2881 if ((aac_cache
& 6) != 2)
2882 return aac_synchronize(scsicmd
);
2886 struct inquiry_data inq_data
;
2888 dprintk((KERN_DEBUG
"INQUIRY command, ID: %d.\n", cid
));
2889 memset(&inq_data
, 0, sizeof (struct inquiry_data
));
2891 if ((scsicmd
->cmnd
[1] & 0x1) && aac_wwn
) {
2892 char *arr
= (char *)&inq_data
;
2895 arr
[0] = (scmd_id(scsicmd
) == host
->this_id
) ?
2896 INQD_PDT_PROC
: INQD_PDT_DA
;
2897 if (scsicmd
->cmnd
[2] == 0) {
2898 /* supported vital product data pages */
2903 arr
[1] = scsicmd
->cmnd
[2];
2904 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2906 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2907 } else if (scsicmd
->cmnd
[2] == 0x80) {
2908 /* unit serial number page */
2909 arr
[3] = setinqserial(dev
, &arr
[4],
2911 arr
[1] = scsicmd
->cmnd
[2];
2912 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2915 return aac_get_container_serial(
2917 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2918 } else if (scsicmd
->cmnd
[2] == 0x83) {
2919 /* vpd page 0x83 - Device Identification Page */
2920 char *sno
= (char *)&inq_data
;
2921 sno
[3] = setinqserial(dev
, &sno
[4],
2924 return aac_get_container_serial(
2926 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2928 /* vpd page not implemented */
2929 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
2930 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
2931 ILLEGAL_REQUEST
, SENCODE_INVALID_CDB_FIELD
,
2932 ASENCODE_NO_SENSE
, 7, 2);
2933 memcpy(scsicmd
->sense_buffer
,
2934 &dev
->fsa_dev
[cid
].sense_data
,
2936 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2937 SCSI_SENSE_BUFFERSIZE
));
2941 inq_data
.inqd_ver
= 2; /* claim compliance to SCSI-2 */
2942 inq_data
.inqd_rdf
= 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2943 inq_data
.inqd_len
= 31;
2944 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2945 inq_data
.inqd_pad2
= 0x32 ; /*WBus16|Sync|CmdQue */
2947 * Set the Vendor, Product, and Revision Level
2948 * see: <vendor>.c i.e. aac.c
2950 if (cid
== host
->this_id
) {
2951 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), ARRAY_SIZE(container_types
));
2952 inq_data
.inqd_pdt
= INQD_PDT_PROC
; /* Processor device */
2953 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
,
2955 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
2960 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), fsa_dev_ptr
[cid
].type
);
2961 inq_data
.inqd_pdt
= INQD_PDT_DA
; /* Direct/random access device */
2962 scsi_sg_copy_from_buffer(scsicmd
, &inq_data
, sizeof(inq_data
));
2963 return aac_get_container_name(scsicmd
);
2965 case SERVICE_ACTION_IN_16
:
2966 if (!(dev
->raw_io_interface
) ||
2967 !(dev
->raw_io_64
) ||
2968 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2973 unsigned int alloc_len
;
2975 dprintk((KERN_DEBUG
"READ CAPACITY_16 command.\n"));
2976 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2977 cp
[0] = (capacity
>> 56) & 0xff;
2978 cp
[1] = (capacity
>> 48) & 0xff;
2979 cp
[2] = (capacity
>> 40) & 0xff;
2980 cp
[3] = (capacity
>> 32) & 0xff;
2981 cp
[4] = (capacity
>> 24) & 0xff;
2982 cp
[5] = (capacity
>> 16) & 0xff;
2983 cp
[6] = (capacity
>> 8) & 0xff;
2984 cp
[7] = (capacity
>> 0) & 0xff;
2985 cp
[8] = (fsa_dev_ptr
[cid
].block_size
>> 24) & 0xff;
2986 cp
[9] = (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
2987 cp
[10] = (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
2988 cp
[11] = (fsa_dev_ptr
[cid
].block_size
) & 0xff;
2991 alloc_len
= ((scsicmd
->cmnd
[10] << 24)
2992 + (scsicmd
->cmnd
[11] << 16)
2993 + (scsicmd
->cmnd
[12] << 8) + scsicmd
->cmnd
[13]);
2995 alloc_len
= min_t(size_t, alloc_len
, sizeof(cp
));
2996 scsi_sg_copy_from_buffer(scsicmd
, cp
, alloc_len
);
2997 if (alloc_len
< scsi_bufflen(scsicmd
))
2998 scsi_set_resid(scsicmd
,
2999 scsi_bufflen(scsicmd
) - alloc_len
);
3001 /* Do not cache partition table for arrays */
3002 scsicmd
->device
->removable
= 1;
3004 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3013 dprintk((KERN_DEBUG
"READ CAPACITY command.\n"));
3014 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3015 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3019 cp
[0] = (capacity
>> 24) & 0xff;
3020 cp
[1] = (capacity
>> 16) & 0xff;
3021 cp
[2] = (capacity
>> 8) & 0xff;
3022 cp
[3] = (capacity
>> 0) & 0xff;
3023 cp
[4] = (fsa_dev_ptr
[cid
].block_size
>> 24) & 0xff;
3024 cp
[5] = (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3025 cp
[6] = (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3026 cp
[7] = (fsa_dev_ptr
[cid
].block_size
) & 0xff;
3027 scsi_sg_copy_from_buffer(scsicmd
, cp
, sizeof(cp
));
3028 /* Do not cache partition table for arrays */
3029 scsicmd
->device
->removable
= 1;
3030 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3036 int mode_buf_length
= 4;
3040 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3041 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3045 dprintk((KERN_DEBUG
"MODE SENSE command.\n"));
3046 memset((char *)&mpd
, 0, sizeof(aac_modep_data
));
3048 /* Mode data length */
3049 mpd
.hd
.data_length
= sizeof(mpd
.hd
) - 1;
3050 /* Medium type - default */
3051 mpd
.hd
.med_type
= 0;
3052 /* Device-specific param,
3053 bit 8: 0/1 = write enabled/protected
3054 bit 4: 0/1 = FUA enabled */
3057 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
3058 mpd
.hd
.dev_par
= 0x10;
3059 if (scsicmd
->cmnd
[1] & 0x8)
3060 mpd
.hd
.bd_length
= 0; /* Block descriptor length */
3062 mpd
.hd
.bd_length
= sizeof(mpd
.bd
);
3063 mpd
.hd
.data_length
+= mpd
.hd
.bd_length
;
3064 mpd
.bd
.block_length
[0] =
3065 (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3066 mpd
.bd
.block_length
[1] =
3067 (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3068 mpd
.bd
.block_length
[2] =
3069 fsa_dev_ptr
[cid
].block_size
& 0xff;
3071 mpd
.mpc_buf
[0] = scsicmd
->cmnd
[2];
3072 if (scsicmd
->cmnd
[2] == 0x1C) {
3074 mpd
.mpc_buf
[1] = 0xa;
3075 /* Mode data length */
3076 mpd
.hd
.data_length
= 23;
3078 /* Mode data length */
3079 mpd
.hd
.data_length
= 15;
3082 if (capacity
> 0xffffff) {
3083 mpd
.bd
.block_count
[0] = 0xff;
3084 mpd
.bd
.block_count
[1] = 0xff;
3085 mpd
.bd
.block_count
[2] = 0xff;
3087 mpd
.bd
.block_count
[0] = (capacity
>> 16) & 0xff;
3088 mpd
.bd
.block_count
[1] = (capacity
>> 8) & 0xff;
3089 mpd
.bd
.block_count
[2] = capacity
& 0xff;
3092 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
3093 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
3094 mpd
.hd
.data_length
+= 3;
3097 mpd
.mpc_buf
[2] = ((aac_cache
& 6) == 2)
3098 ? 0 : 0x04; /* WCE */
3099 mode_buf_length
= sizeof(mpd
);
3102 if (mode_buf_length
> scsicmd
->cmnd
[4])
3103 mode_buf_length
= scsicmd
->cmnd
[4];
3105 mode_buf_length
= sizeof(mpd
);
3106 scsi_sg_copy_from_buffer(scsicmd
,
3109 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3115 int mode_buf_length
= 8;
3116 aac_modep10_data mpd10
;
3118 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
3119 capacity
= fsa_dev_ptr
[cid
].size
- 1;
3123 dprintk((KERN_DEBUG
"MODE SENSE 10 byte command.\n"));
3124 memset((char *)&mpd10
, 0, sizeof(aac_modep10_data
));
3125 /* Mode data length (MSB) */
3126 mpd10
.hd
.data_length
[0] = 0;
3127 /* Mode data length (LSB) */
3128 mpd10
.hd
.data_length
[1] = sizeof(mpd10
.hd
) - 1;
3129 /* Medium type - default */
3130 mpd10
.hd
.med_type
= 0;
3131 /* Device-specific param,
3132 bit 8: 0/1 = write enabled/protected
3133 bit 4: 0/1 = FUA enabled */
3134 mpd10
.hd
.dev_par
= 0;
3136 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
3137 mpd10
.hd
.dev_par
= 0x10;
3138 mpd10
.hd
.rsrvd
[0] = 0; /* reserved */
3139 mpd10
.hd
.rsrvd
[1] = 0; /* reserved */
3140 if (scsicmd
->cmnd
[1] & 0x8) {
3141 /* Block descriptor length (MSB) */
3142 mpd10
.hd
.bd_length
[0] = 0;
3143 /* Block descriptor length (LSB) */
3144 mpd10
.hd
.bd_length
[1] = 0;
3146 mpd10
.hd
.bd_length
[0] = 0;
3147 mpd10
.hd
.bd_length
[1] = sizeof(mpd10
.bd
);
3149 mpd10
.hd
.data_length
[1] += mpd10
.hd
.bd_length
[1];
3151 mpd10
.bd
.block_length
[0] =
3152 (fsa_dev_ptr
[cid
].block_size
>> 16) & 0xff;
3153 mpd10
.bd
.block_length
[1] =
3154 (fsa_dev_ptr
[cid
].block_size
>> 8) & 0xff;
3155 mpd10
.bd
.block_length
[2] =
3156 fsa_dev_ptr
[cid
].block_size
& 0xff;
3158 if (capacity
> 0xffffff) {
3159 mpd10
.bd
.block_count
[0] = 0xff;
3160 mpd10
.bd
.block_count
[1] = 0xff;
3161 mpd10
.bd
.block_count
[2] = 0xff;
3163 mpd10
.bd
.block_count
[0] =
3164 (capacity
>> 16) & 0xff;
3165 mpd10
.bd
.block_count
[1] =
3166 (capacity
>> 8) & 0xff;
3167 mpd10
.bd
.block_count
[2] =
3171 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
3172 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
3173 mpd10
.hd
.data_length
[1] += 3;
3174 mpd10
.mpc_buf
[0] = 8;
3175 mpd10
.mpc_buf
[1] = 1;
3176 mpd10
.mpc_buf
[2] = ((aac_cache
& 6) == 2)
3177 ? 0 : 0x04; /* WCE */
3178 mode_buf_length
= sizeof(mpd10
);
3179 if (mode_buf_length
> scsicmd
->cmnd
[8])
3180 mode_buf_length
= scsicmd
->cmnd
[8];
3182 scsi_sg_copy_from_buffer(scsicmd
,
3186 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3190 dprintk((KERN_DEBUG
"REQUEST SENSE command.\n"));
3191 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
3192 sizeof(struct sense_data
));
3193 memset(&dev
->fsa_dev
[cid
].sense_data
, 0,
3194 sizeof(struct sense_data
));
3195 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3198 case ALLOW_MEDIUM_REMOVAL
:
3199 dprintk((KERN_DEBUG
"LOCK command.\n"));
3200 if (scsicmd
->cmnd
[4])
3201 fsa_dev_ptr
[cid
].locked
= 1;
3203 fsa_dev_ptr
[cid
].locked
= 0;
3205 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3208 * These commands are all No-Ops
3210 case TEST_UNIT_READY
:
3211 if (fsa_dev_ptr
[cid
].sense_data
.sense_key
== NOT_READY
) {
3212 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
3213 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3214 NOT_READY
, SENCODE_BECOMING_READY
,
3215 ASENCODE_BECOMING_READY
, 0, 0);
3216 memcpy(scsicmd
->sense_buffer
,
3217 &dev
->fsa_dev
[cid
].sense_data
,
3219 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3220 SCSI_SENSE_BUFFERSIZE
));
3227 case REASSIGN_BLOCKS
:
3229 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_GOOD
;
3233 return aac_start_stop(scsicmd
);
3237 * Unhandled commands
3239 dprintk((KERN_WARNING
"Unhandled SCSI Command: 0x%x.\n",
3241 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_CHECK_CONDITION
;
3242 set_sense(&dev
->fsa_dev
[cid
].sense_data
,
3243 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
3244 ASENCODE_INVALID_COMMAND
, 0, 0);
3245 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
3247 sizeof(dev
->fsa_dev
[cid
].sense_data
),
3248 SCSI_SENSE_BUFFERSIZE
));
3253 aac_scsi_done(scsicmd
);
3257 static int query_disk(struct aac_dev
*dev
, void __user
*arg
)
3259 struct aac_query_disk qd
;
3260 struct fsa_dev_info
*fsa_dev_ptr
;
3262 fsa_dev_ptr
= dev
->fsa_dev
;
3265 if (copy_from_user(&qd
, arg
, sizeof (struct aac_query_disk
)))
3267 if (qd
.cnum
== -1) {
3268 if (qd
.id
< 0 || qd
.id
>= dev
->maximum_num_containers
)
3271 } else if ((qd
.bus
== -1) && (qd
.id
== -1) && (qd
.lun
== -1)) {
3272 if (qd
.cnum
< 0 || qd
.cnum
>= dev
->maximum_num_containers
)
3274 qd
.instance
= dev
->scsi_host_ptr
->host_no
;
3276 qd
.id
= CONTAINER_TO_ID(qd
.cnum
);
3277 qd
.lun
= CONTAINER_TO_LUN(qd
.cnum
);
3279 else return -EINVAL
;
3281 qd
.valid
= fsa_dev_ptr
[qd
.cnum
].valid
!= 0;
3282 qd
.locked
= fsa_dev_ptr
[qd
.cnum
].locked
;
3283 qd
.deleted
= fsa_dev_ptr
[qd
.cnum
].deleted
;
3285 if (fsa_dev_ptr
[qd
.cnum
].devname
[0] == '\0')
3290 strscpy(qd
.name
, fsa_dev_ptr
[qd
.cnum
].devname
,
3291 min(sizeof(qd
.name
), sizeof(fsa_dev_ptr
[qd
.cnum
].devname
) + 1));
3293 if (copy_to_user(arg
, &qd
, sizeof (struct aac_query_disk
)))
3298 static int force_delete_disk(struct aac_dev
*dev
, void __user
*arg
)
3300 struct aac_delete_disk dd
;
3301 struct fsa_dev_info
*fsa_dev_ptr
;
3303 fsa_dev_ptr
= dev
->fsa_dev
;
3307 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
3310 if (dd
.cnum
>= dev
->maximum_num_containers
)
3313 * Mark this container as being deleted.
3315 fsa_dev_ptr
[dd
.cnum
].deleted
= 1;
3317 * Mark the container as no longer valid
3319 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
3323 static int delete_disk(struct aac_dev
*dev
, void __user
*arg
)
3325 struct aac_delete_disk dd
;
3326 struct fsa_dev_info
*fsa_dev_ptr
;
3328 fsa_dev_ptr
= dev
->fsa_dev
;
3332 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
3335 if (dd
.cnum
>= dev
->maximum_num_containers
)
3338 * If the container is locked, it can not be deleted by the API.
3340 if (fsa_dev_ptr
[dd
.cnum
].locked
)
3344 * Mark the container as no longer being valid.
3346 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
3347 fsa_dev_ptr
[dd
.cnum
].devname
[0] = '\0';
3352 int aac_dev_ioctl(struct aac_dev
*dev
, unsigned int cmd
, void __user
*arg
)
3355 case FSACTL_QUERY_DISK
:
3356 return query_disk(dev
, arg
);
3357 case FSACTL_DELETE_DISK
:
3358 return delete_disk(dev
, arg
);
3359 case FSACTL_FORCE_DELETE_DISK
:
3360 return force_delete_disk(dev
, arg
);
3361 case FSACTL_GET_CONTAINERS
:
3362 return aac_get_containers(dev
);
3370 * @context: the context set in the fib - here it is scsi cmd
3371 * @fibptr: pointer to the fib
3373 * Handles the completion of a scsi command to a non dasd device
3375 static void aac_srb_callback(void *context
, struct fib
* fibptr
)
3377 struct aac_srb_reply
*srbreply
;
3378 struct scsi_cmnd
*scsicmd
;
3380 scsicmd
= (struct scsi_cmnd
*) context
;
3382 if (!aac_valid_context(scsicmd
, fibptr
))
3385 BUG_ON(fibptr
== NULL
);
3387 srbreply
= (struct aac_srb_reply
*) fib_data(fibptr
);
3389 scsicmd
->sense_buffer
[0] = '\0'; /* Initialize sense valid flag to false */
3391 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
3393 srbreply
->srb_status
= cpu_to_le32(SRB_STATUS_SUCCESS
);
3394 srbreply
->scsi_status
= cpu_to_le32(SAM_STAT_GOOD
);
3397 * Calculate resid for sg
3399 scsi_set_resid(scsicmd
, scsi_bufflen(scsicmd
)
3400 - le32_to_cpu(srbreply
->data_xfer_length
));
3404 scsi_dma_unmap(scsicmd
);
3406 /* expose physical device if expose_physicald flag is on */
3407 if (scsicmd
->cmnd
[0] == INQUIRY
&& !(scsicmd
->cmnd
[1] & 0x01)
3408 && expose_physicals
> 0)
3409 aac_expose_phy_device(scsicmd
);
3412 * First check the fib status
3415 if (le32_to_cpu(srbreply
->status
) != ST_OK
) {
3418 pr_warn("aac_srb_callback: srb failed, status = %d\n",
3419 le32_to_cpu(srbreply
->status
));
3420 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
3421 SCSI_SENSE_BUFFERSIZE
);
3422 scsicmd
->result
= DID_ERROR
<< 16 | SAM_STAT_CHECK_CONDITION
;
3423 memcpy(scsicmd
->sense_buffer
,
3424 srbreply
->sense_data
, len
);
3428 * Next check the srb status
3430 switch ((le32_to_cpu(srbreply
->srb_status
))&0x3f) {
3431 case SRB_STATUS_ERROR_RECOVERY
:
3432 case SRB_STATUS_PENDING
:
3433 case SRB_STATUS_SUCCESS
:
3434 scsicmd
->result
= DID_OK
<< 16;
3436 case SRB_STATUS_DATA_OVERRUN
:
3437 switch (scsicmd
->cmnd
[0]) {
3446 if (le32_to_cpu(srbreply
->data_xfer_length
)
3447 < scsicmd
->underflow
)
3448 pr_warn("aacraid: SCSI CMD underflow\n");
3450 pr_warn("aacraid: SCSI CMD Data Overrun\n");
3451 scsicmd
->result
= DID_ERROR
<< 16;
3454 scsicmd
->result
= DID_OK
<< 16;
3457 scsicmd
->result
= DID_OK
<< 16;
3461 case SRB_STATUS_ABORTED
:
3462 scsicmd
->result
= DID_ABORT
<< 16;
3464 case SRB_STATUS_ABORT_FAILED
:
3466 * Not sure about this one - but assuming the
3467 * hba was trying to abort for some reason
3469 scsicmd
->result
= DID_ERROR
<< 16;
3471 case SRB_STATUS_PARITY_ERROR
:
3472 scsicmd
->result
= DID_PARITY
<< 16;
3474 case SRB_STATUS_NO_DEVICE
:
3475 case SRB_STATUS_INVALID_PATH_ID
:
3476 case SRB_STATUS_INVALID_TARGET_ID
:
3477 case SRB_STATUS_INVALID_LUN
:
3478 case SRB_STATUS_SELECTION_TIMEOUT
:
3479 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3482 case SRB_STATUS_COMMAND_TIMEOUT
:
3483 case SRB_STATUS_TIMEOUT
:
3484 scsicmd
->result
= DID_TIME_OUT
<< 16;
3487 case SRB_STATUS_BUSY
:
3488 scsicmd
->result
= DID_BUS_BUSY
<< 16;
3491 case SRB_STATUS_BUS_RESET
:
3492 scsicmd
->result
= DID_RESET
<< 16;
3495 case SRB_STATUS_MESSAGE_REJECTED
:
3496 scsicmd
->result
= DID_ERROR
<< 16;
3498 case SRB_STATUS_REQUEST_FLUSHED
:
3499 case SRB_STATUS_ERROR
:
3500 case SRB_STATUS_INVALID_REQUEST
:
3501 case SRB_STATUS_REQUEST_SENSE_FAILED
:
3502 case SRB_STATUS_NO_HBA
:
3503 case SRB_STATUS_UNEXPECTED_BUS_FREE
:
3504 case SRB_STATUS_PHASE_SEQUENCE_FAILURE
:
3505 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH
:
3506 case SRB_STATUS_DELAYED_RETRY
:
3507 case SRB_STATUS_BAD_FUNCTION
:
3508 case SRB_STATUS_NOT_STARTED
:
3509 case SRB_STATUS_NOT_IN_USE
:
3510 case SRB_STATUS_FORCE_ABORT
:
3511 case SRB_STATUS_DOMAIN_VALIDATION_FAIL
:
3513 #ifdef AAC_DETAILED_STATUS_INFO
3514 pr_info("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\n",
3515 le32_to_cpu(srbreply
->srb_status
) & 0x3F,
3516 aac_get_status_string(
3517 le32_to_cpu(srbreply
->srb_status
) & 0x3F),
3519 le32_to_cpu(srbreply
->scsi_status
));
3522 * When the CC bit is SET by the host in ATA pass thru CDB,
3523 * driver is supposed to return DID_OK
3525 * When the CC bit is RESET by the host, driver should
3528 if ((scsicmd
->cmnd
[0] == ATA_12
)
3529 || (scsicmd
->cmnd
[0] == ATA_16
)) {
3531 if (scsicmd
->cmnd
[2] & (0x01 << 5)) {
3532 scsicmd
->result
= DID_OK
<< 16;
3534 scsicmd
->result
= DID_ERROR
<< 16;
3537 scsicmd
->result
= DID_ERROR
<< 16;
3541 if (le32_to_cpu(srbreply
->scsi_status
)
3542 == SAM_STAT_CHECK_CONDITION
) {
3545 scsicmd
->result
|= SAM_STAT_CHECK_CONDITION
;
3546 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
3547 SCSI_SENSE_BUFFERSIZE
);
3548 #ifdef AAC_DETAILED_STATUS_INFO
3549 pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",
3550 le32_to_cpu(srbreply
->status
), len
);
3552 memcpy(scsicmd
->sense_buffer
,
3553 srbreply
->sense_data
, len
);
3557 * OR in the scsi status (already shifted up a bit)
3559 scsicmd
->result
|= le32_to_cpu(srbreply
->scsi_status
);
3561 aac_fib_complete(fibptr
);
3562 aac_scsi_done(scsicmd
);
3565 static void hba_resp_task_complete(struct aac_dev
*dev
,
3566 struct scsi_cmnd
*scsicmd
,
3567 struct aac_hba_resp
*err
) {
3569 scsicmd
->result
= err
->status
;
3570 /* set residual count */
3571 scsi_set_resid(scsicmd
, le32_to_cpu(err
->residual_count
));
3573 switch (err
->status
) {
3575 scsicmd
->result
|= DID_OK
<< 16;
3577 case SAM_STAT_CHECK_CONDITION
:
3581 len
= min_t(u8
, err
->sense_response_data_len
,
3582 SCSI_SENSE_BUFFERSIZE
);
3584 memcpy(scsicmd
->sense_buffer
,
3585 err
->sense_response_buf
, len
);
3586 scsicmd
->result
|= DID_OK
<< 16;
3590 scsicmd
->result
|= DID_BUS_BUSY
<< 16;
3592 case SAM_STAT_TASK_ABORTED
:
3593 scsicmd
->result
|= DID_ABORT
<< 16;
3595 case SAM_STAT_RESERVATION_CONFLICT
:
3596 case SAM_STAT_TASK_SET_FULL
:
3598 scsicmd
->result
|= DID_ERROR
<< 16;
3603 static void hba_resp_task_failure(struct aac_dev
*dev
,
3604 struct scsi_cmnd
*scsicmd
,
3605 struct aac_hba_resp
*err
)
3607 switch (err
->status
) {
3608 case HBA_RESP_STAT_HBAMODE_DISABLED
:
3612 bus
= aac_logical_to_phys(scmd_channel(scsicmd
));
3613 cid
= scmd_id(scsicmd
);
3614 if (dev
->hba_map
[bus
][cid
].devtype
== AAC_DEVTYPE_NATIVE_RAW
) {
3615 dev
->hba_map
[bus
][cid
].devtype
= AAC_DEVTYPE_ARC_RAW
;
3616 dev
->hba_map
[bus
][cid
].rmw_nexus
= 0xffffffff;
3618 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3621 case HBA_RESP_STAT_IO_ERROR
:
3622 case HBA_RESP_STAT_NO_PATH_TO_DEVICE
:
3623 scsicmd
->result
= DID_OK
<< 16 | SAM_STAT_BUSY
;
3625 case HBA_RESP_STAT_IO_ABORTED
:
3626 scsicmd
->result
= DID_ABORT
<< 16;
3628 case HBA_RESP_STAT_INVALID_DEVICE
:
3629 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3631 case HBA_RESP_STAT_UNDERRUN
:
3632 /* UNDERRUN is OK */
3633 scsicmd
->result
= DID_OK
<< 16;
3635 case HBA_RESP_STAT_OVERRUN
:
3637 scsicmd
->result
= DID_ERROR
<< 16;
3644 * @context: the context set in the fib - here it is scsi cmd
3645 * @fibptr: pointer to the fib
3647 * Handles the completion of a native HBA scsi command
3649 void aac_hba_callback(void *context
, struct fib
*fibptr
)
3651 struct aac_dev
*dev
;
3652 struct scsi_cmnd
*scsicmd
;
3654 struct aac_hba_resp
*err
=
3655 &((struct aac_native_hba
*)fibptr
->hw_fib_va
)->resp
.err
;
3657 scsicmd
= (struct scsi_cmnd
*) context
;
3659 if (!aac_valid_context(scsicmd
, fibptr
))
3662 WARN_ON(fibptr
== NULL
);
3665 if (!(fibptr
->flags
& FIB_CONTEXT_FLAG_NATIVE_HBA_TMF
))
3666 scsi_dma_unmap(scsicmd
);
3668 if (fibptr
->flags
& FIB_CONTEXT_FLAG_FASTRESP
) {
3670 scsicmd
->result
= DID_OK
<< 16;
3674 switch (err
->service_response
) {
3675 case HBA_RESP_SVCRES_TASK_COMPLETE
:
3676 hba_resp_task_complete(dev
, scsicmd
, err
);
3678 case HBA_RESP_SVCRES_FAILURE
:
3679 hba_resp_task_failure(dev
, scsicmd
, err
);
3681 case HBA_RESP_SVCRES_TMF_REJECTED
:
3682 scsicmd
->result
= DID_ERROR
<< 16;
3684 case HBA_RESP_SVCRES_TMF_LUN_INVALID
:
3685 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3687 case HBA_RESP_SVCRES_TMF_COMPLETE
:
3688 case HBA_RESP_SVCRES_TMF_SUCCEEDED
:
3689 scsicmd
->result
= DID_OK
<< 16;
3692 scsicmd
->result
= DID_ERROR
<< 16;
3697 aac_fib_complete(fibptr
);
3699 if (fibptr
->flags
& FIB_CONTEXT_FLAG_NATIVE_HBA_TMF
)
3700 aac_priv(scsicmd
)->sent_command
= 1;
3702 aac_scsi_done(scsicmd
);
3707 * @scsicmd: the scsi command block
3709 * This routine will form a FIB and fill in the aac_srb from the
3710 * scsicmd passed in.
3712 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
)
3714 struct fib
* cmd_fibcontext
;
3715 struct aac_dev
* dev
;
3718 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
3719 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
3720 scsicmd
->device
->lun
> 7) {
3721 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3722 aac_scsi_done(scsicmd
);
3727 * Allocate and initialize a Fib then setup a BlockWrite command
3729 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
3730 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
3731 status
= aac_adapter_scsi(cmd_fibcontext
, scsicmd
);
3734 * Check that the command queued to the controller
3736 if (status
== -EINPROGRESS
)
3739 printk(KERN_WARNING
"aac_srb: aac_fib_send failed with status: %d\n", status
);
3740 aac_fib_complete(cmd_fibcontext
);
3741 aac_fib_free(cmd_fibcontext
);
3748 * @scsicmd: the scsi command block
3750 * This routine will form a FIB and fill in the aac_hba_cmd_req from the
3751 * scsicmd passed in.
3753 static int aac_send_hba_fib(struct scsi_cmnd
*scsicmd
)
3755 struct fib
*cmd_fibcontext
;
3756 struct aac_dev
*dev
;
3759 dev
= shost_priv(scsicmd
->device
->host
);
3760 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
3761 scsicmd
->device
->lun
> AAC_MAX_LUN
- 1) {
3762 scsicmd
->result
= DID_NO_CONNECT
<< 16;
3763 aac_scsi_done(scsicmd
);
3768 * Allocate and initialize a Fib then setup a BlockWrite command
3770 cmd_fibcontext
= aac_fib_alloc_tag(dev
, scsicmd
);
3771 if (!cmd_fibcontext
)
3774 aac_priv(scsicmd
)->owner
= AAC_OWNER_FIRMWARE
;
3775 status
= aac_adapter_hba(cmd_fibcontext
, scsicmd
);
3778 * Check that the command queued to the controller
3780 if (status
== -EINPROGRESS
)
3783 pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n",
3785 aac_fib_complete(cmd_fibcontext
);
3786 aac_fib_free(cmd_fibcontext
);
3792 static long aac_build_sg(struct scsi_cmnd
*scsicmd
, struct sgmap
*psg
)
3794 unsigned long byte_count
= 0;
3796 struct scatterlist
*sg
;
3799 // Get rid of old data
3801 psg
->sg
[0].addr
= 0;
3802 psg
->sg
[0].count
= 0;
3804 nseg
= scsi_dma_map(scsicmd
);
3808 psg
->count
= cpu_to_le32(nseg
);
3810 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3811 psg
->sg
[i
].addr
= cpu_to_le32(sg_dma_address(sg
));
3812 psg
->sg
[i
].count
= cpu_to_le32(sg_dma_len(sg
));
3813 byte_count
+= sg_dma_len(sg
);
3815 /* hba wants the size to be exact */
3816 if (byte_count
> scsi_bufflen(scsicmd
)) {
3817 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3818 (byte_count
- scsi_bufflen(scsicmd
));
3819 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3820 byte_count
= scsi_bufflen(scsicmd
);
3822 /* Check for command underflow */
3823 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3824 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3825 byte_count
, scsicmd
->underflow
);
3832 static long aac_build_sg64(struct scsi_cmnd
*scsicmd
, struct sgmap64
*psg
)
3834 unsigned long byte_count
= 0;
3837 struct scatterlist
*sg
;
3840 // Get rid of old data
3842 psg
->sg
[0].addr
[0] = 0;
3843 psg
->sg
[0].addr
[1] = 0;
3844 psg
->sg
[0].count
= 0;
3846 nseg
= scsi_dma_map(scsicmd
);
3850 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3851 int count
= sg_dma_len(sg
);
3852 addr
= sg_dma_address(sg
);
3853 psg
->sg
[i
].addr
[0] = cpu_to_le32(addr
& 0xffffffff);
3854 psg
->sg
[i
].addr
[1] = cpu_to_le32(addr
>>32);
3855 psg
->sg
[i
].count
= cpu_to_le32(count
);
3856 byte_count
+= count
;
3858 psg
->count
= cpu_to_le32(nseg
);
3859 /* hba wants the size to be exact */
3860 if (byte_count
> scsi_bufflen(scsicmd
)) {
3861 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3862 (byte_count
- scsi_bufflen(scsicmd
));
3863 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3864 byte_count
= scsi_bufflen(scsicmd
);
3866 /* Check for command underflow */
3867 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3868 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3869 byte_count
, scsicmd
->underflow
);
3875 static long aac_build_sgraw(struct scsi_cmnd
*scsicmd
, struct sgmapraw
*psg
)
3877 unsigned long byte_count
= 0;
3879 struct scatterlist
*sg
;
3882 // Get rid of old data
3884 psg
->sg
[0].next
= 0;
3885 psg
->sg
[0].prev
= 0;
3886 psg
->sg
[0].addr
[0] = 0;
3887 psg
->sg
[0].addr
[1] = 0;
3888 psg
->sg
[0].count
= 0;
3889 psg
->sg
[0].flags
= 0;
3891 nseg
= scsi_dma_map(scsicmd
);
3895 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3896 int count
= sg_dma_len(sg
);
3897 u64 addr
= sg_dma_address(sg
);
3898 psg
->sg
[i
].next
= 0;
3899 psg
->sg
[i
].prev
= 0;
3900 psg
->sg
[i
].addr
[1] = cpu_to_le32((u32
)(addr
>>32));
3901 psg
->sg
[i
].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
3902 psg
->sg
[i
].count
= cpu_to_le32(count
);
3903 psg
->sg
[i
].flags
= 0;
3904 byte_count
+= count
;
3906 psg
->count
= cpu_to_le32(nseg
);
3907 /* hba wants the size to be exact */
3908 if (byte_count
> scsi_bufflen(scsicmd
)) {
3909 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
3910 (byte_count
- scsi_bufflen(scsicmd
));
3911 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
3912 byte_count
= scsi_bufflen(scsicmd
);
3914 /* Check for command underflow */
3915 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3916 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3917 byte_count
, scsicmd
->underflow
);
3923 static long aac_build_sgraw2(struct scsi_cmnd
*scsicmd
,
3924 struct aac_raw_io2
*rio2
, int sg_max
)
3926 unsigned long byte_count
= 0;
3928 struct scatterlist
*sg
;
3929 int i
, conformable
= 0;
3930 u32 min_size
= PAGE_SIZE
, cur_size
;
3932 nseg
= scsi_dma_map(scsicmd
);
3936 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
3937 int count
= sg_dma_len(sg
);
3938 u64 addr
= sg_dma_address(sg
);
3940 BUG_ON(i
>= sg_max
);
3941 rio2
->sge
[i
].addrHigh
= cpu_to_le32((u32
)(addr
>>32));
3942 rio2
->sge
[i
].addrLow
= cpu_to_le32((u32
)(addr
& 0xffffffff));
3943 cur_size
= cpu_to_le32(count
);
3944 rio2
->sge
[i
].length
= cur_size
;
3945 rio2
->sge
[i
].flags
= 0;
3948 rio2
->sgeFirstSize
= cur_size
;
3949 } else if (i
== 1) {
3950 rio2
->sgeNominalSize
= cur_size
;
3951 min_size
= cur_size
;
3952 } else if ((i
+1) < nseg
&& cur_size
!= rio2
->sgeNominalSize
) {
3954 if (cur_size
< min_size
)
3955 min_size
= cur_size
;
3957 byte_count
+= count
;
3960 /* hba wants the size to be exact */
3961 if (byte_count
> scsi_bufflen(scsicmd
)) {
3962 u32 temp
= le32_to_cpu(rio2
->sge
[i
-1].length
) -
3963 (byte_count
- scsi_bufflen(scsicmd
));
3964 rio2
->sge
[i
-1].length
= cpu_to_le32(temp
);
3965 byte_count
= scsi_bufflen(scsicmd
);
3968 rio2
->sgeCnt
= cpu_to_le32(nseg
);
3969 rio2
->flags
|= cpu_to_le16(RIO2_SG_FORMAT_IEEE1212
);
3970 /* not conformable: evaluate required sg elements */
3972 int j
, nseg_new
= nseg
, err_found
;
3973 for (i
= min_size
/ PAGE_SIZE
; i
>= 1; --i
) {
3976 for (j
= 1; j
< nseg
- 1; ++j
) {
3977 if (rio2
->sge
[j
].length
% (i
*PAGE_SIZE
)) {
3981 nseg_new
+= (rio2
->sge
[j
].length
/ (i
*PAGE_SIZE
));
3986 if (i
> 0 && nseg_new
<= sg_max
) {
3987 int ret
= aac_convert_sgraw2(rio2
, i
, nseg
, nseg_new
);
3993 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
3995 /* Check for command underflow */
3996 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
3997 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
3998 byte_count
, scsicmd
->underflow
);
4004 static int aac_convert_sgraw2(struct aac_raw_io2
*rio2
, int pages
, int nseg
, int nseg_new
)
4006 struct sge_ieee1212
*sge
;
4010 if (aac_convert_sgl
== 0)
4013 sge
= kmalloc_array(nseg_new
, sizeof(*sge
), GFP_ATOMIC
);
4017 for (i
= 1, pos
= 1; i
< nseg
-1; ++i
) {
4018 for (j
= 0; j
< rio2
->sge
[i
].length
/ (pages
* PAGE_SIZE
); ++j
) {
4019 addr_low
= rio2
->sge
[i
].addrLow
+ j
* pages
* PAGE_SIZE
;
4020 sge
[pos
].addrLow
= addr_low
;
4021 sge
[pos
].addrHigh
= rio2
->sge
[i
].addrHigh
;
4022 if (addr_low
< rio2
->sge
[i
].addrLow
)
4023 sge
[pos
].addrHigh
++;
4024 sge
[pos
].length
= pages
* PAGE_SIZE
;
4029 sge
[pos
] = rio2
->sge
[nseg
-1];
4030 memcpy(&rio2
->sge
[1], &sge
[1], (nseg_new
-1)*sizeof(struct sge_ieee1212
));
4033 rio2
->sgeCnt
= cpu_to_le32(nseg_new
);
4034 rio2
->flags
|= cpu_to_le16(RIO2_SGL_CONFORMANT
);
4035 rio2
->sgeNominalSize
= pages
* PAGE_SIZE
;
4039 static long aac_build_sghba(struct scsi_cmnd
*scsicmd
,
4040 struct aac_hba_cmd_req
*hbacmd
,
4044 unsigned long byte_count
= 0;
4046 struct scatterlist
*sg
;
4049 struct aac_hba_sgl
*sge
;
4051 nseg
= scsi_dma_map(scsicmd
);
4057 if (nseg
> HBA_MAX_SG_EMBEDDED
)
4058 sge
= &hbacmd
->sge
[2];
4060 sge
= &hbacmd
->sge
[0];
4062 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
4063 int count
= sg_dma_len(sg
);
4064 u64 addr
= sg_dma_address(sg
);
4066 WARN_ON(i
>= sg_max
);
4067 sge
->addr_hi
= cpu_to_le32((u32
)(addr
>>32));
4068 sge
->addr_lo
= cpu_to_le32((u32
)(addr
& 0xffffffff));
4069 cur_size
= cpu_to_le32(count
);
4070 sge
->len
= cur_size
;
4072 byte_count
+= count
;
4077 /* hba wants the size to be exact */
4078 if (byte_count
> scsi_bufflen(scsicmd
)) {
4081 temp
= le32_to_cpu(sge
->len
) - byte_count
4082 - scsi_bufflen(scsicmd
);
4083 sge
->len
= cpu_to_le32(temp
);
4084 byte_count
= scsi_bufflen(scsicmd
);
4087 if (nseg
<= HBA_MAX_SG_EMBEDDED
) {
4088 hbacmd
->emb_data_desc_count
= cpu_to_le32(nseg
);
4089 sge
->flags
= cpu_to_le32(0x40000000);
4092 hbacmd
->sge
[0].flags
= cpu_to_le32(0x80000000);
4093 hbacmd
->emb_data_desc_count
= (u8
)cpu_to_le32(1);
4094 hbacmd
->sge
[0].addr_hi
= (u32
)cpu_to_le32(sg_address
>> 32);
4095 hbacmd
->sge
[0].addr_lo
=
4096 cpu_to_le32((u32
)(sg_address
& 0xffffffff));
4099 /* Check for command underflow */
4100 if (scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)) {
4101 pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n",
4102 byte_count
, scsicmd
->underflow
);
4108 #ifdef AAC_DETAILED_STATUS_INFO
4110 struct aac_srb_status_info
{
4116 static struct aac_srb_status_info srb_status_info
[] = {
4117 { SRB_STATUS_PENDING
, "Pending Status"},
4118 { SRB_STATUS_SUCCESS
, "Success"},
4119 { SRB_STATUS_ABORTED
, "Aborted Command"},
4120 { SRB_STATUS_ABORT_FAILED
, "Abort Failed"},
4121 { SRB_STATUS_ERROR
, "Error Event"},
4122 { SRB_STATUS_BUSY
, "Device Busy"},
4123 { SRB_STATUS_INVALID_REQUEST
, "Invalid Request"},
4124 { SRB_STATUS_INVALID_PATH_ID
, "Invalid Path ID"},
4125 { SRB_STATUS_NO_DEVICE
, "No Device"},
4126 { SRB_STATUS_TIMEOUT
, "Timeout"},
4127 { SRB_STATUS_SELECTION_TIMEOUT
, "Selection Timeout"},
4128 { SRB_STATUS_COMMAND_TIMEOUT
, "Command Timeout"},
4129 { SRB_STATUS_MESSAGE_REJECTED
, "Message Rejected"},
4130 { SRB_STATUS_BUS_RESET
, "Bus Reset"},
4131 { SRB_STATUS_PARITY_ERROR
, "Parity Error"},
4132 { SRB_STATUS_REQUEST_SENSE_FAILED
,"Request Sense Failed"},
4133 { SRB_STATUS_NO_HBA
, "No HBA"},
4134 { SRB_STATUS_DATA_OVERRUN
, "Data Overrun/Data Underrun"},
4135 { SRB_STATUS_UNEXPECTED_BUS_FREE
,"Unexpected Bus Free"},
4136 { SRB_STATUS_PHASE_SEQUENCE_FAILURE
,"Phase Error"},
4137 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH
,"Bad Srb Block Length"},
4138 { SRB_STATUS_REQUEST_FLUSHED
, "Request Flushed"},
4139 { SRB_STATUS_DELAYED_RETRY
, "Delayed Retry"},
4140 { SRB_STATUS_INVALID_LUN
, "Invalid LUN"},
4141 { SRB_STATUS_INVALID_TARGET_ID
, "Invalid TARGET ID"},
4142 { SRB_STATUS_BAD_FUNCTION
, "Bad Function"},
4143 { SRB_STATUS_ERROR_RECOVERY
, "Error Recovery"},
4144 { SRB_STATUS_NOT_STARTED
, "Not Started"},
4145 { SRB_STATUS_NOT_IN_USE
, "Not In Use"},
4146 { SRB_STATUS_FORCE_ABORT
, "Force Abort"},
4147 { SRB_STATUS_DOMAIN_VALIDATION_FAIL
,"Domain Validation Failure"},
4148 { 0xff, "Unknown Error"}
4151 char *aac_get_status_string(u32 status
)
4155 for (i
= 0; i
< ARRAY_SIZE(srb_status_info
); i
++)
4156 if (srb_status_info
[i
].status
== status
)
4157 return srb_status_info
[i
].str
;
4159 return "Bad Status Code";