drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()

[drm/drm-misc.git] / drivers / scsi / pm8001 / pm8001_sas.c

/*
 * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
 *
 * Copyright (c) 2008-2009 USI Co., Ltd.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 *
 */

#include <linux/slab.h>
#include "pm8001_sas.h"
#include "pm80xx_tracepoints.h"

/**
 * pm8001_find_tag - from sas task to find out  tag that belongs to this task
 * @task: the task sent to the LLDD
 * @tag: the found tag associated with the task
 */
static int pm8001_find_tag(struct sas_task *task, u32 *tag)
{
        if (task->lldd_task) {
                struct pm8001_ccb_info *ccb;
                ccb = task->lldd_task;
                *tag = ccb->ccb_tag;
                return 1;
        }
        return 0;
}

/**
  * pm8001_tag_free - free the no more needed tag
  * @pm8001_ha: our hba struct
  * @tag: the found tag associated with the task
  */
void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
{
        void *bitmap = pm8001_ha->rsvd_tags;
        unsigned long flags;

        if (tag >= PM8001_RESERVE_SLOT)
                return;

        spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
        __clear_bit(tag, bitmap);
        spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
}

/**
  * pm8001_tag_alloc - allocate a empty tag for task used.
  * @pm8001_ha: our hba struct
  * @tag_out: the found empty tag .
  */
int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
{
        void *bitmap = pm8001_ha->rsvd_tags;
        unsigned long flags;
        unsigned int tag;

        spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
        tag = find_first_zero_bit(bitmap, PM8001_RESERVE_SLOT);
        if (tag >= PM8001_RESERVE_SLOT) {
                spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
                return -SAS_QUEUE_FULL;
        }
        __set_bit(tag, bitmap);
        spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);

        /* reserved tags are in the lower region of the tagset */
        *tag_out = tag;
        return 0;
}

/**
 * pm8001_mem_alloc - allocate memory for pm8001.
 * @pdev: pci device.
 * @virt_addr: the allocated virtual address
 * @pphys_addr: DMA address for this device
 * @pphys_addr_hi: the physical address high byte address.
 * @pphys_addr_lo: the physical address low byte address.
 * @mem_size: memory size.
 * @align: requested byte alignment
 */
int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
        dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
        u32 *pphys_addr_lo, u32 mem_size, u32 align)
{
        caddr_t mem_virt_alloc;
        dma_addr_t mem_dma_handle;
        u64 phys_align;
        u64 align_offset = 0;
        if (align)
                align_offset = (dma_addr_t)align - 1;
        mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align,
                                            &mem_dma_handle, GFP_KERNEL);
        if (!mem_virt_alloc)
                return -ENOMEM;
        *pphys_addr = mem_dma_handle;
        phys_align = (*pphys_addr + align_offset) & ~align_offset;
        *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
        *pphys_addr_hi = upper_32_bits(phys_align);
        *pphys_addr_lo = lower_32_bits(phys_align);
        return 0;
}

/**
  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
  * find out our hba struct.
  * @dev: the domain device which from sas layer.
  */
static
struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
{
        struct sas_ha_struct *sha = dev->port->ha;
        struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
        return pm8001_ha;
}

/**
  * pm8001_phy_control - this function should be registered to
  * sas_domain_function_template to provide libsas used, note: this is just
  * control the HBA phy rather than other expander phy if you want control
  * other phy, you should use SMP command.
  * @sas_phy: which phy in HBA phys.
  * @func: the operation.
  * @funcdata: always NULL.
  */
int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
        void *funcdata)
{
        int rc = 0, phy_id = sas_phy->id;
        struct pm8001_hba_info *pm8001_ha = NULL;
        struct sas_phy_linkrates *rates;
        struct pm8001_phy *phy;
        DECLARE_COMPLETION_ONSTACK(completion);
        unsigned long flags;
        pm8001_ha = sas_phy->ha->lldd_ha;
        phy = &pm8001_ha->phy[phy_id];

        if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
                /*
                 * If the controller is in fatal error state,
                 * we will not get a response from the controller
                 */
                pm8001_dbg(pm8001_ha, FAIL,
                           "Phy control failed due to fatal errors\n");
                return -EFAULT;
        }

        switch (func) {
        case PHY_FUNC_SET_LINK_RATE:
                rates = funcdata;
                if (rates->minimum_linkrate) {
                        pm8001_ha->phy[phy_id].minimum_linkrate =
                                rates->minimum_linkrate;
                }
                if (rates->maximum_linkrate) {
                        pm8001_ha->phy[phy_id].maximum_linkrate =
                                rates->maximum_linkrate;
                }
                if (pm8001_ha->phy[phy_id].phy_state ==  PHY_LINK_DISABLE) {
                        pm8001_ha->phy[phy_id].enable_completion = &completion;
                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
                        wait_for_completion(&completion);
                }
                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
                                              PHY_LINK_RESET);
                break;
        case PHY_FUNC_HARD_RESET:
                if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
                        pm8001_ha->phy[phy_id].enable_completion = &completion;
                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
                        wait_for_completion(&completion);
                }
                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
                                              PHY_HARD_RESET);
                break;
        case PHY_FUNC_LINK_RESET:
                if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
                        pm8001_ha->phy[phy_id].enable_completion = &completion;
                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
                        wait_for_completion(&completion);
                }
                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
                                              PHY_LINK_RESET);
                break;
        case PHY_FUNC_RELEASE_SPINUP_HOLD:
                PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
                                              PHY_LINK_RESET);
                break;
        case PHY_FUNC_DISABLE:
                if (pm8001_ha->chip_id != chip_8001) {
                        if (pm8001_ha->phy[phy_id].phy_state ==
                                PHY_STATE_LINK_UP_SPCV) {
                                sas_phy_disconnected(&phy->sas_phy);
                                sas_notify_phy_event(&phy->sas_phy,
                                        PHYE_LOSS_OF_SIGNAL, GFP_KERNEL);
                                phy->phy_attached = 0;
                        }
                } else {
                        if (pm8001_ha->phy[phy_id].phy_state ==
                                PHY_STATE_LINK_UP_SPC) {
                                sas_phy_disconnected(&phy->sas_phy);
                                sas_notify_phy_event(&phy->sas_phy,
                                        PHYE_LOSS_OF_SIGNAL, GFP_KERNEL);
                                phy->phy_attached = 0;
                        }
                }
                PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
                break;
        case PHY_FUNC_GET_EVENTS:
                spin_lock_irqsave(&pm8001_ha->lock, flags);
                if (pm8001_ha->chip_id == chip_8001) {
                        if (-1 == pm8001_bar4_shift(pm8001_ha,
                                        (phy_id < 4) ? 0x30000 : 0x40000)) {
                                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
                                return -EINVAL;
                        }
                }
                {
                        struct sas_phy *phy = sas_phy->phy;
                        u32 __iomem *qp = pm8001_ha->io_mem[2].memvirtaddr
                                + 0x1034 + (0x4000 * (phy_id & 3));

                        phy->invalid_dword_count = readl(qp);
                        phy->running_disparity_error_count = readl(&qp[1]);
                        phy->loss_of_dword_sync_count = readl(&qp[3]);
                        phy->phy_reset_problem_count = readl(&qp[4]);
                }
                if (pm8001_ha->chip_id == chip_8001)
                        pm8001_bar4_shift(pm8001_ha, 0);
                spin_unlock_irqrestore(&pm8001_ha->lock, flags);
                return 0;
        default:
                pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func);
                rc = -EOPNOTSUPP;
        }
        msleep(300);
        return rc;
}

/**
  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
  * command to HBA.
  * @shost: the scsi host data.
  */
void pm8001_scan_start(struct Scsi_Host *shost)
{
        int i;
        struct pm8001_hba_info *pm8001_ha;
        struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
        DECLARE_COMPLETION_ONSTACK(completion);
        pm8001_ha = sha->lldd_ha;
        /* SAS_RE_INITIALIZATION not available in SPCv/ve */
        if (pm8001_ha->chip_id == chip_8001)
                PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
        for (i = 0; i < pm8001_ha->chip->n_phy; ++i) {
                pm8001_ha->phy[i].enable_completion = &completion;
                PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
                wait_for_completion(&completion);
                msleep(300);
        }
}

int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
{
        struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);

        /* give the phy enabling interrupt event time to come in (1s
        * is empirically about all it takes) */
        if (time < HZ)
                return 0;
        /* Wait for discovery to finish */
        sas_drain_work(ha);
        return 1;
}

/**
  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
  * @pm8001_ha: our hba card information
  * @ccb: the ccb which attached to smp task
  */
static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
        struct pm8001_ccb_info *ccb)
{
        return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
}

u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
{
        struct ata_queued_cmd *qc = task->uldd_task;

        if (qc && ata_is_ncq(qc->tf.protocol)) {
                *tag = qc->tag;
                return 1;
        }

        return 0;
}

/**
  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
  * @pm8001_ha: our hba card information
  * @ccb: the ccb which attached to sata task
  */
static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
        struct pm8001_ccb_info *ccb)
{
        return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
}

/**
  * pm8001_task_prep_internal_abort - the dispatcher function, prepare data
  *                                   for internal abort task
  * @pm8001_ha: our hba card information
  * @ccb: the ccb which attached to sata task
  */
static int pm8001_task_prep_internal_abort(struct pm8001_hba_info *pm8001_ha,
                                           struct pm8001_ccb_info *ccb)
{
        return PM8001_CHIP_DISP->task_abort(pm8001_ha, ccb);
}

/**
  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
  * @pm8001_ha: our hba card information
  * @ccb: the ccb which attached to TM
  * @tmf: the task management IU
  */
static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
        struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf)
{
        return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
}

/**
  * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task
  * @pm8001_ha: our hba card information
  * @ccb: the ccb which attached to ssp task
  */
static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
        struct pm8001_ccb_info *ccb)
{
        return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
}

 /* Find the local port id that's attached to this device */
static int sas_find_local_port_id(struct domain_device *dev)
{
        struct domain_device *pdev = dev->parent;

        /* Directly attached device */
        if (!pdev)
                return dev->port->id;
        while (pdev) {
                struct domain_device *pdev_p = pdev->parent;
                if (!pdev_p)
                        return pdev->port->id;
                pdev = pdev->parent;
        }
        return 0;
}

#define DEV_IS_GONE(pm8001_dev) \
        ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))


static int pm8001_deliver_command(struct pm8001_hba_info *pm8001_ha,
                                  struct pm8001_ccb_info *ccb)
{
        struct sas_task *task = ccb->task;
        enum sas_protocol task_proto = task->task_proto;
        struct sas_tmf_task *tmf = task->tmf;
        int is_tmf = !!tmf;

        switch (task_proto) {
        case SAS_PROTOCOL_SMP:
                return pm8001_task_prep_smp(pm8001_ha, ccb);
        case SAS_PROTOCOL_SSP:
                if (is_tmf)
                        return pm8001_task_prep_ssp_tm(pm8001_ha, ccb, tmf);
                return pm8001_task_prep_ssp(pm8001_ha, ccb);
        case SAS_PROTOCOL_SATA:
        case SAS_PROTOCOL_STP:
                return pm8001_task_prep_ata(pm8001_ha, ccb);
        case SAS_PROTOCOL_INTERNAL_ABORT:
                return pm8001_task_prep_internal_abort(pm8001_ha, ccb);
        default:
                dev_err(pm8001_ha->dev, "unknown sas_task proto: 0x%x\n",
                        task_proto);
        }

        return -EINVAL;
}

/**
  * pm8001_queue_command - register for upper layer used, all IO commands sent
  * to HBA are from this interface.
  * @task: the task to be execute.
  * @gfp_flags: gfp_flags
  */
int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
        struct task_status_struct *ts = &task->task_status;
        enum sas_protocol task_proto = task->task_proto;
        struct domain_device *dev = task->dev;
        struct pm8001_device *pm8001_dev = dev->lldd_dev;
        bool internal_abort = sas_is_internal_abort(task);
        struct pm8001_hba_info *pm8001_ha;
        struct pm8001_port *port = NULL;
        struct pm8001_ccb_info *ccb;
        unsigned long flags;
        u32 n_elem = 0;
        int rc = 0;

        if (!internal_abort && !dev->port) {
                ts->resp = SAS_TASK_UNDELIVERED;
                ts->stat = SAS_PHY_DOWN;
                if (dev->dev_type != SAS_SATA_DEV)
                        task->task_done(task);
                return 0;
        }

        pm8001_ha = pm8001_find_ha_by_dev(dev);
        if (pm8001_ha->controller_fatal_error) {
                ts->resp = SAS_TASK_UNDELIVERED;
                task->task_done(task);
                return 0;
        }

        pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n");

        spin_lock_irqsave(&pm8001_ha->lock, flags);

        pm8001_dev = dev->lldd_dev;
        port = &pm8001_ha->port[sas_find_local_port_id(dev)];

        if (!internal_abort &&
            (DEV_IS_GONE(pm8001_dev) || !port->port_attached)) {
                ts->resp = SAS_TASK_UNDELIVERED;
                ts->stat = SAS_PHY_DOWN;
                if (sas_protocol_ata(task_proto)) {
                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
                        task->task_done(task);
                        spin_lock_irqsave(&pm8001_ha->lock, flags);
                } else {
                        task->task_done(task);
                }
                rc = -ENODEV;
                goto err_out;
        }

        ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, task);
        if (!ccb) {
                rc = -SAS_QUEUE_FULL;
                goto err_out;
        }

        if (!sas_protocol_ata(task_proto)) {
                if (task->num_scatter) {
                        n_elem = dma_map_sg(pm8001_ha->dev, task->scatter,
                                            task->num_scatter, task->data_dir);
                        if (!n_elem) {
                                rc = -ENOMEM;
                                goto err_out_ccb;
                        }
                }
        } else {
                n_elem = task->num_scatter;
        }

        task->lldd_task = ccb;
        ccb->n_elem = n_elem;

        atomic_inc(&pm8001_dev->running_req);

        rc = pm8001_deliver_command(pm8001_ha, ccb);
        if (rc) {
                atomic_dec(&pm8001_dev->running_req);
                if (!sas_protocol_ata(task_proto) && n_elem)
                        dma_unmap_sg(pm8001_ha->dev, task->scatter,
                                     task->num_scatter, task->data_dir);
err_out_ccb:
                pm8001_ccb_free(pm8001_ha, ccb);

err_out:
                pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec failed[%d]!\n", rc);
        }

        spin_unlock_irqrestore(&pm8001_ha->lock, flags);

        return rc;
}

/**
  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
  * @pm8001_ha: our hba card information
  * @ccb: the ccb which attached to ssp task to free
  */
void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
                          struct pm8001_ccb_info *ccb)
{
        struct sas_task *task = ccb->task;
        struct ata_queued_cmd *qc;
        struct pm8001_device *pm8001_dev;

        if (!task)
                return;

        if (!sas_protocol_ata(task->task_proto) && ccb->n_elem)
                dma_unmap_sg(pm8001_ha->dev, task->scatter,
                             task->num_scatter, task->data_dir);

        switch (task->task_proto) {
        case SAS_PROTOCOL_SMP:
                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
                        DMA_FROM_DEVICE);
                dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
                        DMA_TO_DEVICE);
                break;

        case SAS_PROTOCOL_SATA:
        case SAS_PROTOCOL_STP:
        case SAS_PROTOCOL_SSP:
        default:
                /* do nothing */
                break;
        }

        if (sas_protocol_ata(task->task_proto)) {
                /* For SCSI/ATA commands uldd_task points to ata_queued_cmd */
                qc = task->uldd_task;
                pm8001_dev = ccb->device;
                trace_pm80xx_request_complete(pm8001_ha->id,
                        pm8001_dev ? pm8001_dev->attached_phy : PM8001_MAX_PHYS,
                        ccb->ccb_tag, 0 /* ctlr_opcode not known */,
                        qc ? qc->tf.command : 0, // ata opcode
                        pm8001_dev ? atomic_read(&pm8001_dev->running_req) : -1);
        }

        task->lldd_task = NULL;
        pm8001_ccb_free(pm8001_ha, ccb);
}

/**
 * pm8001_alloc_dev - find a empty pm8001_device
 * @pm8001_ha: our hba card information
 */
static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
{
        u32 dev;
        for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
                if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
                        pm8001_ha->devices[dev].id = dev;
                        return &pm8001_ha->devices[dev];
                }
        }
        if (dev == PM8001_MAX_DEVICES) {
                pm8001_dbg(pm8001_ha, FAIL,
                           "max support %d devices, ignore ..\n",
                           PM8001_MAX_DEVICES);
        }
        return NULL;
}
/**
  * pm8001_find_dev - find a matching pm8001_device
  * @pm8001_ha: our hba card information
  * @device_id: device ID to match against
  */
struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
                                        u32 device_id)
{
        u32 dev;
        for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
                if (pm8001_ha->devices[dev].device_id == device_id)
                        return &pm8001_ha->devices[dev];
        }
        if (dev == PM8001_MAX_DEVICES) {
                pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n");
        }
        return NULL;
}

void pm8001_free_dev(struct pm8001_device *pm8001_dev)
{
        u32 id = pm8001_dev->id;
        memset(pm8001_dev, 0, sizeof(*pm8001_dev));
        pm8001_dev->id = id;
        pm8001_dev->dev_type = SAS_PHY_UNUSED;
        pm8001_dev->device_id = PM8001_MAX_DEVICES;
        pm8001_dev->sas_device = NULL;
}

/**
  * pm8001_dev_found_notify - libsas notify a device is found.
  * @dev: the device structure which sas layer used.
  *
  * when libsas find a sas domain device, it should tell the LLDD that
  * device is found, and then LLDD register this device to HBA firmware
  * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
  * device ID(according to device's sas address) and returned it to LLDD. From
  * now on, we communicate with HBA FW with the device ID which HBA assigned
  * rather than sas address. it is the necessary step for our HBA but it is
  * the optional for other HBA driver.
  */
static int pm8001_dev_found_notify(struct domain_device *dev)
{
        unsigned long flags = 0;
        int res = 0;
        struct pm8001_hba_info *pm8001_ha = NULL;
        struct domain_device *parent_dev = dev->parent;
        struct pm8001_device *pm8001_device;
        DECLARE_COMPLETION_ONSTACK(completion);
        u32 flag = 0;
        pm8001_ha = pm8001_find_ha_by_dev(dev);
        spin_lock_irqsave(&pm8001_ha->lock, flags);

        pm8001_device = pm8001_alloc_dev(pm8001_ha);
        if (!pm8001_device) {
                res = -1;
                goto found_out;
        }
        pm8001_device->sas_device = dev;
        dev->lldd_dev = pm8001_device;
        pm8001_device->dev_type = dev->dev_type;
        pm8001_device->dcompletion = &completion;
        if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
                int phy_id;

                phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev);
                if (phy_id < 0) {
                        pm8001_dbg(pm8001_ha, FAIL,
                                   "Error: no attached dev:%016llx at ex:%016llx.\n",
                                   SAS_ADDR(dev->sas_addr),
                                   SAS_ADDR(parent_dev->sas_addr));
                        res = phy_id;
                } else {
                        pm8001_device->attached_phy = phy_id;
                }
        } else {
                if (dev->dev_type == SAS_SATA_DEV) {
                        pm8001_device->attached_phy =
                                dev->rphy->identify.phy_identifier;
                        flag = 1; /* directly sata */
                }
        } /*register this device to HBA*/
        pm8001_dbg(pm8001_ha, DISC, "Found device\n");
        PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
        wait_for_completion(&completion);
        if (dev->dev_type == SAS_END_DEVICE)
                msleep(50);
        pm8001_ha->flags = PM8001F_RUN_TIME;
        return 0;
found_out:
        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
        return res;
}

int pm8001_dev_found(struct domain_device *dev)
{
        return pm8001_dev_found_notify(dev);
}

#define PM8001_TASK_TIMEOUT 20

/**
  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
  * @dev: the device structure which sas layer used.
  */
static void pm8001_dev_gone_notify(struct domain_device *dev)
{
        unsigned long flags = 0;
        struct pm8001_hba_info *pm8001_ha;
        struct pm8001_device *pm8001_dev = dev->lldd_dev;

        pm8001_ha = pm8001_find_ha_by_dev(dev);
        spin_lock_irqsave(&pm8001_ha->lock, flags);
        if (pm8001_dev) {
                u32 device_id = pm8001_dev->device_id;

                pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n",
                           pm8001_dev->device_id, pm8001_dev->dev_type);
                if (atomic_read(&pm8001_dev->running_req)) {
                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
                        sas_execute_internal_abort_dev(dev, 0, NULL);
                        while (atomic_read(&pm8001_dev->running_req))
                                msleep(20);
                        spin_lock_irqsave(&pm8001_ha->lock, flags);
                }
                PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
                pm8001_free_dev(pm8001_dev);
        } else {
                pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
        }
        dev->lldd_dev = NULL;
        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
}

void pm8001_dev_gone(struct domain_device *dev)
{
        pm8001_dev_gone_notify(dev);
}

/* retry commands by ha, by task and/or by device */
void pm8001_open_reject_retry(
        struct pm8001_hba_info *pm8001_ha,
        struct sas_task *task_to_close,
        struct pm8001_device *device_to_close)
{
        int i;
        unsigned long flags;

        if (pm8001_ha == NULL)
                return;

        spin_lock_irqsave(&pm8001_ha->lock, flags);

        for (i = 0; i < PM8001_MAX_CCB; i++) {
                struct sas_task *task;
                struct task_status_struct *ts;
                struct pm8001_device *pm8001_dev;
                unsigned long flags1;
                struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];

                if (ccb->ccb_tag == PM8001_INVALID_TAG)
                        continue;

                pm8001_dev = ccb->device;
                if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
                        continue;
                if (!device_to_close) {
                        uintptr_t d = (uintptr_t)pm8001_dev
                                        - (uintptr_t)&pm8001_ha->devices;
                        if (((d % sizeof(*pm8001_dev)) != 0)
                         || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
                                continue;
                } else if (pm8001_dev != device_to_close)
                        continue;
                task = ccb->task;
                if (!task || !task->task_done)
                        continue;
                if (task_to_close && (task != task_to_close))
                        continue;
                ts = &task->task_status;
                ts->resp = SAS_TASK_COMPLETE;
                /* Force the midlayer to retry */
                ts->stat = SAS_OPEN_REJECT;
                ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
                if (pm8001_dev)
                        atomic_dec(&pm8001_dev->running_req);
                spin_lock_irqsave(&task->task_state_lock, flags1);
                task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
                task->task_state_flags |= SAS_TASK_STATE_DONE;
                if (unlikely((task->task_state_flags
                                & SAS_TASK_STATE_ABORTED))) {
                        spin_unlock_irqrestore(&task->task_state_lock,
                                flags1);
                        pm8001_ccb_task_free(pm8001_ha, ccb);
                } else {
                        spin_unlock_irqrestore(&task->task_state_lock,
                                flags1);
                        pm8001_ccb_task_free(pm8001_ha, ccb);
                        mb();/* in order to force CPU ordering */
                        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
                        task->task_done(task);
                        spin_lock_irqsave(&pm8001_ha->lock, flags);
                }
        }

        spin_unlock_irqrestore(&pm8001_ha->lock, flags);
}

/**
 * pm8001_I_T_nexus_reset() - reset the initiator/target connection
 * @dev: the device structure for the device to reset.
 *
 * Standard mandates link reset for ATA (type 0) and hard reset for
 * SSP (type 1), only for RECOVERY
 */
int pm8001_I_T_nexus_reset(struct domain_device *dev)
{
        int rc = TMF_RESP_FUNC_FAILED;
        struct pm8001_device *pm8001_dev;
        struct pm8001_hba_info *pm8001_ha;
        struct sas_phy *phy;

        if (!dev || !dev->lldd_dev)
                return -ENODEV;

        pm8001_dev = dev->lldd_dev;
        pm8001_ha = pm8001_find_ha_by_dev(dev);
        phy = sas_get_local_phy(dev);

        if (dev_is_sata(dev)) {
                if (scsi_is_sas_phy_local(phy)) {
                        rc = 0;
                        goto out;
                }
                rc = sas_phy_reset(phy, 1);
                if (rc) {
                        pm8001_dbg(pm8001_ha, EH,
                                   "phy reset failed for device %x\n"
                                   "with rc %d\n", pm8001_dev->device_id, rc);
                        rc = TMF_RESP_FUNC_FAILED;
                        goto out;
                }
                msleep(2000);
                rc = sas_execute_internal_abort_dev(dev, 0, NULL);
                if (rc) {
                        pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n"
                                   "with rc %d\n", pm8001_dev->device_id, rc);
                        rc = TMF_RESP_FUNC_FAILED;
                }
        } else {
                rc = sas_phy_reset(phy, 1);
                msleep(2000);
        }
        pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
                   pm8001_dev->device_id, rc);
 out:
        sas_put_local_phy(phy);
        return rc;
}

/*
* This function handle the IT_NEXUS_XXX event or completion
* status code for SSP/SATA/SMP I/O request.
*/
int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
{
        int rc = TMF_RESP_FUNC_FAILED;
        struct pm8001_device *pm8001_dev;
        struct pm8001_hba_info *pm8001_ha;
        struct sas_phy *phy;

        if (!dev || !dev->lldd_dev)
                return -1;

        pm8001_dev = dev->lldd_dev;
        pm8001_ha = pm8001_find_ha_by_dev(dev);

        pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n");

        phy = sas_get_local_phy(dev);

        if (dev_is_sata(dev)) {
                DECLARE_COMPLETION_ONSTACK(completion_setstate);
                if (scsi_is_sas_phy_local(phy)) {
                        rc = 0;
                        goto out;
                }
                /* send internal ssp/sata/smp abort command to FW */
                sas_execute_internal_abort_dev(dev, 0, NULL);
                msleep(100);

                /* deregister the target device */
                pm8001_dev_gone_notify(dev);
                msleep(200);

                /*send phy reset to hard reset target */
                rc = sas_phy_reset(phy, 1);
                msleep(2000);
                pm8001_dev->setds_completion = &completion_setstate;

                wait_for_completion(&completion_setstate);
        } else {
                /* send internal ssp/sata/smp abort command to FW */
                sas_execute_internal_abort_dev(dev, 0, NULL);
                msleep(100);

                /* deregister the target device */
                pm8001_dev_gone_notify(dev);
                msleep(200);

                /*send phy reset to hard reset target */
                rc = sas_phy_reset(phy, 1);
                msleep(2000);
        }
        pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
                   pm8001_dev->device_id, rc);
out:
        sas_put_local_phy(phy);

        return rc;
}
/* mandatory SAM-3, the task reset the specified LUN*/
int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
{
        int rc = TMF_RESP_FUNC_FAILED;
        struct pm8001_device *pm8001_dev = dev->lldd_dev;
        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
        DECLARE_COMPLETION_ONSTACK(completion_setstate);

        if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
                /*
                 * If the controller is in fatal error state,
                 * we will not get a response from the controller
                 */
                pm8001_dbg(pm8001_ha, FAIL,
                           "LUN reset failed due to fatal errors\n");
                return rc;
        }

        if (dev_is_sata(dev)) {
                struct sas_phy *phy = sas_get_local_phy(dev);
                sas_execute_internal_abort_dev(dev, 0, NULL);
                rc = sas_phy_reset(phy, 1);
                sas_put_local_phy(phy);
                pm8001_dev->setds_completion = &completion_setstate;
                rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
                        pm8001_dev, DS_OPERATIONAL);
                wait_for_completion(&completion_setstate);
        } else {
                rc = sas_lu_reset(dev, lun);
        }
        /* If failed, fall-through I_T_Nexus reset */
        pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n",
                   pm8001_dev->device_id, rc);
        return rc;
}

/* optional SAM-3 */
int pm8001_query_task(struct sas_task *task)
{
        u32 tag = 0xdeadbeef;
        int rc = TMF_RESP_FUNC_FAILED;
        if (unlikely(!task || !task->lldd_task || !task->dev))
                return rc;

        if (task->task_proto & SAS_PROTOCOL_SSP) {
                struct scsi_cmnd *cmnd = task->uldd_task;
                struct domain_device *dev = task->dev;
                struct pm8001_hba_info *pm8001_ha =
                        pm8001_find_ha_by_dev(dev);

                rc = pm8001_find_tag(task, &tag);
                if (rc == 0) {
                        rc = TMF_RESP_FUNC_FAILED;
                        return rc;
                }
                pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd);

                rc = sas_query_task(task, tag);
                switch (rc) {
                /* The task is still in Lun, release it then */
                case TMF_RESP_FUNC_SUCC:
                        pm8001_dbg(pm8001_ha, EH,
                                   "The task is still in Lun\n");
                        break;
                /* The task is not in Lun or failed, reset the phy */
                case TMF_RESP_FUNC_FAILED:
                case TMF_RESP_FUNC_COMPLETE:
                        pm8001_dbg(pm8001_ha, EH,
                                   "The task is not in Lun or failed, reset the phy\n");
                        break;
                }
        }
        pr_err("pm80xx: rc= %d\n", rc);
        return rc;
}

/*  mandatory SAM-3, still need free task/ccb info, abort the specified task */
int pm8001_abort_task(struct sas_task *task)
{
        struct pm8001_ccb_info *ccb = task->lldd_task;
        unsigned long flags;
        u32 tag;
        struct domain_device *dev ;
        struct pm8001_hba_info *pm8001_ha;
        struct pm8001_device *pm8001_dev;
        int rc = TMF_RESP_FUNC_FAILED, ret;
        u32 phy_id, port_id;
        struct sas_task_slow slow_task;

        if (!task->lldd_task || !task->dev)
                return TMF_RESP_FUNC_FAILED;

        dev = task->dev;
        pm8001_dev = dev->lldd_dev;
        pm8001_ha = pm8001_find_ha_by_dev(dev);
        phy_id = pm8001_dev->attached_phy;

        if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
                // If the controller is seeing fatal errors
                // abort task will not get a response from the controller
                return TMF_RESP_FUNC_FAILED;
        }

        ret = pm8001_find_tag(task, &tag);
        if (ret == 0) {
                pm8001_info(pm8001_ha, "no tag for task:%p\n", task);
                return TMF_RESP_FUNC_FAILED;
        }
        spin_lock_irqsave(&task->task_state_lock, flags);
        if (task->task_state_flags & SAS_TASK_STATE_DONE) {
                spin_unlock_irqrestore(&task->task_state_lock, flags);
                return TMF_RESP_FUNC_COMPLETE;
        }
        task->task_state_flags |= SAS_TASK_STATE_ABORTED;
        if (task->slow_task == NULL) {
                init_completion(&slow_task.completion);
                task->slow_task = &slow_task;
        }
        spin_unlock_irqrestore(&task->task_state_lock, flags);
        if (task->task_proto & SAS_PROTOCOL_SSP) {
                rc = sas_abort_task(task, tag);
                sas_execute_internal_abort_single(dev, tag, 0, NULL);
        } else if (task->task_proto & SAS_PROTOCOL_SATA ||
                task->task_proto & SAS_PROTOCOL_STP) {
                if (pm8001_ha->chip_id == chip_8006) {
                        DECLARE_COMPLETION_ONSTACK(completion_reset);
                        DECLARE_COMPLETION_ONSTACK(completion);
                        struct pm8001_phy *phy = pm8001_ha->phy + phy_id;
                        port_id = phy->port->port_id;

                        /* 1. Set Device state as Recovery */
                        pm8001_dev->setds_completion = &completion;
                        PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
                                pm8001_dev, DS_IN_RECOVERY);
                        wait_for_completion(&completion);

                        /* 2. Send Phy Control Hard Reset */
                        reinit_completion(&completion);
                        phy->port_reset_status = PORT_RESET_TMO;
                        phy->reset_success = false;
                        phy->enable_completion = &completion;
                        phy->reset_completion = &completion_reset;
                        ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
                                PHY_HARD_RESET);
                        if (ret) {
                                phy->enable_completion = NULL;
                                phy->reset_completion = NULL;
                                goto out;
                        }

                        /* In the case of the reset timeout/fail we still
                         * abort the command at the firmware. The assumption
                         * here is that the drive is off doing something so
                         * that it's not processing requests, and we want to
                         * avoid getting a completion for this and either
                         * leaking the task in libsas or losing the race and
                         * getting a double free.
                         */
                        pm8001_dbg(pm8001_ha, MSG,
                                   "Waiting for local phy ctl\n");
                        ret = wait_for_completion_timeout(&completion,
                                        PM8001_TASK_TIMEOUT * HZ);
                        if (!ret || !phy->reset_success) {
                                phy->enable_completion = NULL;
                                phy->reset_completion = NULL;
                        } else {
                                /* 3. Wait for Port Reset complete or
                                 * Port reset TMO
                                 */
                                pm8001_dbg(pm8001_ha, MSG,
                                           "Waiting for Port reset\n");
                                ret = wait_for_completion_timeout(
                                        &completion_reset,
                                        PM8001_TASK_TIMEOUT * HZ);
                                if (!ret)
                                        phy->reset_completion = NULL;
                                WARN_ON(phy->port_reset_status ==
                                                PORT_RESET_TMO);
                                if (phy->port_reset_status == PORT_RESET_TMO) {
                                        pm8001_dev_gone_notify(dev);
                                        PM8001_CHIP_DISP->hw_event_ack_req(
                                                pm8001_ha, 0,
                                                0x07, /*HW_EVENT_PHY_DOWN ack*/
                                                port_id, phy_id, 0, 0);
                                        goto out;
                                }
                        }

                        /*
                         * 4. SATA Abort ALL
                         * we wait for the task to be aborted so that the task
                         * is removed from the ccb. on success the caller is
                         * going to free the task.
                         */
                        ret = sas_execute_internal_abort_dev(dev, 0, NULL);
                        if (ret)
                                goto out;
                        ret = wait_for_completion_timeout(
                                &task->slow_task->completion,
                                PM8001_TASK_TIMEOUT * HZ);
                        if (!ret)
                                goto out;

                        /* 5. Set Device State as Operational */
                        reinit_completion(&completion);
                        pm8001_dev->setds_completion = &completion;
                        PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
                                pm8001_dev, DS_OPERATIONAL);
                        wait_for_completion(&completion);
                } else {
                        /*
                         * Ensure that if we see a completion for the ccb
                         * associated with the task which we are trying to
                         * abort then we should not touch the sas_task as it
                         * may race with libsas freeing it when return here.
                         */
                        ccb->task = NULL;
                        ret = sas_execute_internal_abort_single(dev, tag, 0, NULL);
                }
                rc = TMF_RESP_FUNC_COMPLETE;
        } else if (task->task_proto & SAS_PROTOCOL_SMP) {
                /* SMP */
                rc = sas_execute_internal_abort_single(dev, tag, 0, NULL);

        }
out:
        spin_lock_irqsave(&task->task_state_lock, flags);
        if (task->slow_task == &slow_task)
                task->slow_task = NULL;
        spin_unlock_irqrestore(&task->task_state_lock, flags);
        if (rc != TMF_RESP_FUNC_COMPLETE)
                pm8001_info(pm8001_ha, "rc= %d\n", rc);
        return rc;
}

int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
{
        struct pm8001_device *pm8001_dev = dev->lldd_dev;
        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);

        pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n",
                   pm8001_dev->device_id);
        return sas_clear_task_set(dev, lun);
}

void pm8001_port_formed(struct asd_sas_phy *sas_phy)
{
        struct sas_ha_struct *sas_ha = sas_phy->ha;
        struct pm8001_hba_info *pm8001_ha = sas_ha->lldd_ha;
        struct pm8001_phy *phy = sas_phy->lldd_phy;
        struct asd_sas_port *sas_port = sas_phy->port;
        struct pm8001_port *port = phy->port;

        if (!sas_port) {
                pm8001_dbg(pm8001_ha, FAIL, "Received null port\n");
                return;
        }
        sas_port->lldd_port = port;
}

void pm8001_setds_completion(struct domain_device *dev)
{
        struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
        struct pm8001_device *pm8001_dev = dev->lldd_dev;
        DECLARE_COMPLETION_ONSTACK(completion_setstate);

        if (pm8001_ha->chip_id != chip_8001) {
                pm8001_dev->setds_completion = &completion_setstate;
                PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
                        pm8001_dev, DS_OPERATIONAL);
                wait_for_completion(&completion_setstate);
        }
}

void pm8001_tmf_aborted(struct sas_task *task)
{
        struct pm8001_ccb_info *ccb = task->lldd_task;

        if (ccb)
                ccb->task = NULL;
}