Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml

   1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/hwmon/adi,adm1177.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
   8
   9 maintainers:
  10   - Michael Hennerich <michael.hennerich@analog.com>
  11
  12 description: |
  13   Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
  14   https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
  15
  16 properties:
  17   compatible:
  18     enum:
  19       - adi,adm1177
  20
  21   reg:
  22     maxItems: 1
  23
  24   avcc-supply:
  25     description:
  26       Phandle to the Avcc power supply
  27
  28   shunt-resistor-micro-ohms:
  29     description:
  30       The value of current sense resistor in microohms. If not provided,
  31       the current reading and overcurrent alert is disabled.
  32
  33   adi,shutdown-threshold-microamp:
  34     description:
  35       Specifies the current level at which an over current alert occurs.
  36       If not provided, the overcurrent alert is configured to max ADC range
  37       based on shunt-resistor-micro-ohms.
  38
  39   adi,vrange-high-enable:
  40     description:
  41       Specifies which internal voltage divider to be used. A 1 selects
  42       a 7:2 voltage divider while a 0 selects a 14:1 voltage divider.
  43     type: boolean
  44
  45 required:
  46   - compatible
  47   - reg
  48
  49 allOf:
  50   - $ref: hwmon-common.yaml#
  51
  52 unevaluatedProperties: false
  53
  54 examples:
  55   - |
  56     #include <dt-bindings/gpio/gpio.h>
  57     #include <dt-bindings/interrupt-controller/irq.h>
  58     i2c {
  59         #address-cells = <1>;
  60         #size-cells = <0>;
  61
  62         pwmon@5a {
  63             compatible = "adi,adm1177";
  64             reg = <0x5a>;
  65             shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
  66             adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
  67             adi,vrange-high-enable;
  68         };
  69     };
  70 ...