1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale i.MX6UL Touch Controller
10 - Haibo Chen <haibo.chen@nxp.com>
11 - Shawn Guo <shawnguo@kernel.org>
12 - Sascha Hauer <s.hauer@pengutronix.de>
20 - description: touch controller address
21 - description: ADC2 address
25 - description: touch controller address
26 - description: ADC2 address
39 The X- gpio this controller connect to. This xnur-gpio returns to
40 low once the finger leave the touch screen (The last touch event
41 the touch controller capture).
44 $ref: /schemas/types.yaml#/definitions/uint32
46 The value of measure delay time. Before X-axis or Y-axis measurement,
47 the screen need some time before even potential distribution ready.
53 $ref: /schemas/types.yaml#/definitions/uint32
55 The touch screen need some time to precharge.
60 touchscreen-average-samples:
61 $ref: /schemas/types.yaml#/definitions/uint32
62 description: Number of data samples which are averaged for each read.
63 enum: [ 1, 4, 8, 16, 32 ]
74 - $ref: touchscreen.yaml#
76 additionalProperties: false
80 #include <dt-bindings/interrupt-controller/arm-gic.h>
81 #include <dt-bindings/clock/imx6ul-clock.h>
82 #include <dt-bindings/gpio/gpio.h>
84 compatible = "fsl,imx6ul-tsc";
85 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
86 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
87 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
88 clocks = <&clks IMX6UL_CLK_IPG>,
89 <&clks IMX6UL_CLK_ADC2>;
90 clock-names = "tsc", "adc";
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_tsc>;
93 xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
94 measure-delay-time = <0xfff>;
95 pre-charge-time = <0xffff>;
96 touchscreen-average-samples = <32>;