?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
printf: Remove unused 'bprintf'
[drm/drm-misc.git] / drivers / input / misc / drv260x.c
blob96cd6a078c8abf6f55e0e740d69c37a67a5a4147
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * DRV260X haptics driver family
4 *
5 * Author: Dan Murphy <dmurphy@ti.com>
6 *
7 * Copyright: (C) 2014 Texas Instruments, Inc.
8 */
9
10 #include <linux/i2c.h>
11 #include <linux/input.h>
12 #include <linux/module.h>
13 #include <linux/regmap.h>
14 #include <linux/slab.h>
15 #include <linux/delay.h>
16 #include <linux/gpio/consumer.h>
17 #include <linux/regulator/consumer.h>
18
19 #include <dt-bindings/input/ti-drv260x.h>
20
21 #define DRV260X_STATUS 0x0
22 #define DRV260X_MODE 0x1
23 #define DRV260X_RT_PB_IN 0x2
24 #define DRV260X_LIB_SEL 0x3
25 #define DRV260X_WV_SEQ_1 0x4
26 #define DRV260X_WV_SEQ_2 0x5
27 #define DRV260X_WV_SEQ_3 0x6
28 #define DRV260X_WV_SEQ_4 0x7
29 #define DRV260X_WV_SEQ_5 0x8
30 #define DRV260X_WV_SEQ_6 0x9
31 #define DRV260X_WV_SEQ_7 0xa
32 #define DRV260X_WV_SEQ_8 0xb
33 #define DRV260X_GO 0xc
34 #define DRV260X_OVERDRIVE_OFF 0xd
35 #define DRV260X_SUSTAIN_P_OFF 0xe
36 #define DRV260X_SUSTAIN_N_OFF 0xf
37 #define DRV260X_BRAKE_OFF 0x10
38 #define DRV260X_A_TO_V_CTRL 0x11
39 #define DRV260X_A_TO_V_MIN_INPUT 0x12
40 #define DRV260X_A_TO_V_MAX_INPUT 0x13
41 #define DRV260X_A_TO_V_MIN_OUT 0x14
42 #define DRV260X_A_TO_V_MAX_OUT 0x15
43 #define DRV260X_RATED_VOLT 0x16
44 #define DRV260X_OD_CLAMP_VOLT 0x17
45 #define DRV260X_CAL_COMP 0x18
46 #define DRV260X_CAL_BACK_EMF 0x19
47 #define DRV260X_FEEDBACK_CTRL 0x1a
48 #define DRV260X_CTRL1 0x1b
49 #define DRV260X_CTRL2 0x1c
50 #define DRV260X_CTRL3 0x1d
51 #define DRV260X_CTRL4 0x1e
52 #define DRV260X_CTRL5 0x1f
53 #define DRV260X_LRA_LOOP_PERIOD 0x20
54 #define DRV260X_VBAT_MON 0x21
55 #define DRV260X_LRA_RES_PERIOD 0x22
56 #define DRV260X_MAX_REG 0x23
57
58 #define DRV260X_GO_BIT 0x01
59
60 /* Library Selection */
61 #define DRV260X_LIB_SEL_MASK 0x07
62 #define DRV260X_LIB_SEL_RAM 0x0
63 #define DRV260X_LIB_SEL_OD 0x1
64 #define DRV260X_LIB_SEL_40_60 0x2
65 #define DRV260X_LIB_SEL_60_80 0x3
66 #define DRV260X_LIB_SEL_100_140 0x4
67 #define DRV260X_LIB_SEL_140_PLUS 0x5
68
69 #define DRV260X_LIB_SEL_HIZ_MASK 0x10
70 #define DRV260X_LIB_SEL_HIZ_EN 0x01
71 #define DRV260X_LIB_SEL_HIZ_DIS 0
72
73 /* Mode register */
74 #define DRV260X_STANDBY (1 << 6)
75 #define DRV260X_STANDBY_MASK 0x40
76 #define DRV260X_INTERNAL_TRIGGER 0x00
77 #define DRV260X_EXT_TRIGGER_EDGE 0x01
78 #define DRV260X_EXT_TRIGGER_LEVEL 0x02
79 #define DRV260X_PWM_ANALOG_IN 0x03
80 #define DRV260X_AUDIOHAPTIC 0x04
81 #define DRV260X_RT_PLAYBACK 0x05
82 #define DRV260X_DIAGNOSTICS 0x06
83 #define DRV260X_AUTO_CAL 0x07
84
85 /* Audio to Haptics Control */
86 #define DRV260X_AUDIO_HAPTICS_PEAK_10MS (0 << 2)
87 #define DRV260X_AUDIO_HAPTICS_PEAK_20MS (1 << 2)
88 #define DRV260X_AUDIO_HAPTICS_PEAK_30MS (2 << 2)
89 #define DRV260X_AUDIO_HAPTICS_PEAK_40MS (3 << 2)
90
91 #define DRV260X_AUDIO_HAPTICS_FILTER_100HZ 0x00
92 #define DRV260X_AUDIO_HAPTICS_FILTER_125HZ 0x01
93 #define DRV260X_AUDIO_HAPTICS_FILTER_150HZ 0x02
94 #define DRV260X_AUDIO_HAPTICS_FILTER_200HZ 0x03
95
96 /* Min/Max Input/Output Voltages */
97 #define DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT 0x19
98 #define DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT 0x64
99 #define DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT 0x19
100 #define DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT 0xFF
101
102 /* Feedback register */
103 #define DRV260X_FB_REG_ERM_MODE 0x7f
104 #define DRV260X_FB_REG_LRA_MODE (1 << 7)
105
106 #define DRV260X_BRAKE_FACTOR_MASK 0x1f
107 #define DRV260X_BRAKE_FACTOR_2X (1 << 0)
108 #define DRV260X_BRAKE_FACTOR_3X (2 << 4)
109 #define DRV260X_BRAKE_FACTOR_4X (3 << 4)
110 #define DRV260X_BRAKE_FACTOR_6X (4 << 4)
111 #define DRV260X_BRAKE_FACTOR_8X (5 << 4)
112 #define DRV260X_BRAKE_FACTOR_16 (6 << 4)
113 #define DRV260X_BRAKE_FACTOR_DIS (7 << 4)
114
115 #define DRV260X_LOOP_GAIN_LOW 0xf3
116 #define DRV260X_LOOP_GAIN_MED (1 << 2)
117 #define DRV260X_LOOP_GAIN_HIGH (2 << 2)
118 #define DRV260X_LOOP_GAIN_VERY_HIGH (3 << 2)
119
120 #define DRV260X_BEMF_GAIN_0 0xfc
121 #define DRV260X_BEMF_GAIN_1 (1 << 0)
122 #define DRV260X_BEMF_GAIN_2 (2 << 0)
123 #define DRV260X_BEMF_GAIN_3 (3 << 0)
124
125 /* Control 1 register */
126 #define DRV260X_AC_CPLE_EN (1 << 5)
127 #define DRV260X_STARTUP_BOOST (1 << 7)
128
129 /* Control 2 register */
130
131 #define DRV260X_IDISS_TIME_45 0
132 #define DRV260X_IDISS_TIME_75 (1 << 0)
133 #define DRV260X_IDISS_TIME_150 (1 << 1)
134 #define DRV260X_IDISS_TIME_225 0x03
135
136 #define DRV260X_BLANK_TIME_45 (0 << 2)
137 #define DRV260X_BLANK_TIME_75 (1 << 2)
138 #define DRV260X_BLANK_TIME_150 (2 << 2)
139 #define DRV260X_BLANK_TIME_225 (3 << 2)
140
141 #define DRV260X_SAMP_TIME_150 (0 << 4)
142 #define DRV260X_SAMP_TIME_200 (1 << 4)
143 #define DRV260X_SAMP_TIME_250 (2 << 4)
144 #define DRV260X_SAMP_TIME_300 (3 << 4)
145
146 #define DRV260X_BRAKE_STABILIZER (1 << 6)
147 #define DRV260X_UNIDIR_IN (0 << 7)
148 #define DRV260X_BIDIR_IN (1 << 7)
149
150 /* Control 3 Register */
151 #define DRV260X_LRA_OPEN_LOOP (1 << 0)
152 #define DRV260X_ANALOG_IN (1 << 1)
153 #define DRV260X_LRA_DRV_MODE (1 << 2)
154 #define DRV260X_RTP_UNSIGNED_DATA (1 << 3)
155 #define DRV260X_SUPPLY_COMP_DIS (1 << 4)
156 #define DRV260X_ERM_OPEN_LOOP (1 << 5)
157 #define DRV260X_NG_THRESH_0 (0 << 6)
158 #define DRV260X_NG_THRESH_2 (1 << 6)
159 #define DRV260X_NG_THRESH_4 (2 << 6)
160 #define DRV260X_NG_THRESH_8 (3 << 6)
161
162 /* Control 4 Register */
163 #define DRV260X_AUTOCAL_TIME_150MS (0 << 4)
164 #define DRV260X_AUTOCAL_TIME_250MS (1 << 4)
165 #define DRV260X_AUTOCAL_TIME_500MS (2 << 4)
166 #define DRV260X_AUTOCAL_TIME_1000MS (3 << 4)
167
168 /**
169 * struct drv260x_data -
170 * @input_dev: Pointer to the input device
171 * @client: Pointer to the I2C client
172 * @regmap: Register map of the device
173 * @work: Work item used to off load the enable/disable of the vibration
174 * @enable_gpio: Pointer to the gpio used for enable/disabling
175 * @regulator: Pointer to the regulator for the IC
176 * @magnitude: Magnitude of the vibration event
177 * @mode: The operating mode of the IC (LRA_NO_CAL, ERM or LRA)
178 * @library: The vibration library to be used
179 * @rated_voltage: The rated_voltage of the actuator
180 * @overdrive_voltage: The over drive voltage of the actuator
181 **/
182 struct drv260x_data {
183 struct input_dev *input_dev;
184 struct i2c_client *client;
185 struct regmap *regmap;
186 struct work_struct work;
187 struct gpio_desc *enable_gpio;
188 struct regulator *regulator;
189 u8 magnitude;
190 u32 mode;
191 u32 library;
192 int rated_voltage;
193 int overdrive_voltage;
194 };
195
196 #define DRV260X_DEF_RATED_VOLT 0x90
197 #define DRV260X_DEF_OD_CLAMP_VOLT 0x90
198
199 /*
200 * Rated and Overdriver Voltages:
201 * Calculated using the formula r = v * 255 / 5.6
202 * where r is what will be written to the register
203 * and v is the rated or overdriver voltage of the actuator
204 */
205 static int drv260x_calculate_voltage(unsigned int voltage)
206 {
207 return (voltage * 255 / 5600);
208 }
209
210 static void drv260x_worker(struct work_struct *work)
211 {
212 struct drv260x_data *haptics = container_of(work, struct drv260x_data, work);
213 int error;
214
215 gpiod_set_value(haptics->enable_gpio, 1);
216 /* Data sheet says to wait 250us before trying to communicate */
217 udelay(250);
218
219 error = regmap_write(haptics->regmap,
220 DRV260X_MODE, DRV260X_RT_PLAYBACK);
221 if (error) {
222 dev_err(&haptics->client->dev,
223 "Failed to write set mode: %d\n", error);
224 } else {
225 error = regmap_write(haptics->regmap,
226 DRV260X_RT_PB_IN, haptics->magnitude);
227 if (error)
228 dev_err(&haptics->client->dev,
229 "Failed to set magnitude: %d\n", error);
230 }
231 }
232
233 static int drv260x_haptics_play(struct input_dev *input, void *data,
234 struct ff_effect *effect)
235 {
236 struct drv260x_data *haptics = input_get_drvdata(input);
237
238 haptics->mode = DRV260X_LRA_NO_CAL_MODE;
239
240 /* Scale u16 magnitude into u8 register value */
241 if (effect->u.rumble.strong_magnitude > 0)
242 haptics->magnitude = effect->u.rumble.strong_magnitude >> 8;
243 else if (effect->u.rumble.weak_magnitude > 0)
244 haptics->magnitude = effect->u.rumble.weak_magnitude >> 8;
245 else
246 haptics->magnitude = 0;
247
248 schedule_work(&haptics->work);
249
250 return 0;
251 }
252
253 static void drv260x_close(struct input_dev *input)
254 {
255 struct drv260x_data *haptics = input_get_drvdata(input);
256 int error;
257
258 cancel_work_sync(&haptics->work);
259
260 error = regmap_write(haptics->regmap, DRV260X_MODE, DRV260X_STANDBY);
261 if (error)
262 dev_err(&haptics->client->dev,
263 "Failed to enter standby mode: %d\n", error);
264
265 gpiod_set_value(haptics->enable_gpio, 0);
266 }
267
268 static const struct reg_sequence drv260x_lra_cal_regs[] = {
269 { DRV260X_MODE, DRV260X_AUTO_CAL },
270 { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_RTP_UNSIGNED_DATA },
271 { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE |
272 DRV260X_BRAKE_FACTOR_4X | DRV260X_LOOP_GAIN_HIGH },
273 };
274
275 static const struct reg_sequence drv260x_lra_init_regs[] = {
276 { DRV260X_MODE, DRV260X_RT_PLAYBACK },
277 { DRV260X_A_TO_V_CTRL, DRV260X_AUDIO_HAPTICS_PEAK_20MS |
278 DRV260X_AUDIO_HAPTICS_FILTER_125HZ },
279 { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
280 { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
281 { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT },
282 { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT },
283 { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE |
284 DRV260X_BRAKE_FACTOR_2X | DRV260X_LOOP_GAIN_MED |
285 DRV260X_BEMF_GAIN_3 },
286 { DRV260X_CTRL1, DRV260X_STARTUP_BOOST },
287 { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 },
288 { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_RTP_UNSIGNED_DATA | DRV260X_ANALOG_IN },
289 { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
290 };
291
292 static const struct reg_sequence drv260x_erm_cal_regs[] = {
293 { DRV260X_MODE, DRV260X_AUTO_CAL },
294 { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
295 { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
296 { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT },
297 { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT },
298 { DRV260X_FEEDBACK_CTRL, DRV260X_BRAKE_FACTOR_3X |
299 DRV260X_LOOP_GAIN_MED | DRV260X_BEMF_GAIN_2 },
300 { DRV260X_CTRL1, DRV260X_STARTUP_BOOST },
301 { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 | DRV260X_BLANK_TIME_75 |
302 DRV260X_IDISS_TIME_75 },
303 { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_RTP_UNSIGNED_DATA },
304 { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
305 };
306
307 static int drv260x_init(struct drv260x_data *haptics)
308 {
309 int error;
310 unsigned int cal_buf;
311
312 error = regmap_write(haptics->regmap,
313 DRV260X_RATED_VOLT, haptics->rated_voltage);
314 if (error) {
315 dev_err(&haptics->client->dev,
316 "Failed to write DRV260X_RATED_VOLT register: %d\n",
317 error);
318 return error;
319 }
320
321 error = regmap_write(haptics->regmap,
322 DRV260X_OD_CLAMP_VOLT, haptics->overdrive_voltage);
323 if (error) {
324 dev_err(&haptics->client->dev,
325 "Failed to write DRV260X_OD_CLAMP_VOLT register: %d\n",
326 error);
327 return error;
328 }
329
330 switch (haptics->mode) {
331 case DRV260X_LRA_MODE:
332 error = regmap_register_patch(haptics->regmap,
333 drv260x_lra_cal_regs,
334 ARRAY_SIZE(drv260x_lra_cal_regs));
335 if (error) {
336 dev_err(&haptics->client->dev,
337 "Failed to write LRA calibration registers: %d\n",
338 error);
339 return error;
340 }
341
342 break;
343
344 case DRV260X_ERM_MODE:
345 error = regmap_register_patch(haptics->regmap,
346 drv260x_erm_cal_regs,
347 ARRAY_SIZE(drv260x_erm_cal_regs));
348 if (error) {
349 dev_err(&haptics->client->dev,
350 "Failed to write ERM calibration registers: %d\n",
351 error);
352 return error;
353 }
354
355 error = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL,
356 DRV260X_LIB_SEL_MASK,
357 haptics->library);
358 if (error) {
359 dev_err(&haptics->client->dev,
360 "Failed to write DRV260X_LIB_SEL register: %d\n",
361 error);
362 return error;
363 }
364
365 break;
366
367 default:
368 error = regmap_register_patch(haptics->regmap,
369 drv260x_lra_init_regs,
370 ARRAY_SIZE(drv260x_lra_init_regs));
371 if (error) {
372 dev_err(&haptics->client->dev,
373 "Failed to write LRA init registers: %d\n",
374 error);
375 return error;
376 }
377
378 error = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL,
379 DRV260X_LIB_SEL_MASK,
380 haptics->library);
381 if (error) {
382 dev_err(&haptics->client->dev,
383 "Failed to write DRV260X_LIB_SEL register: %d\n",
384 error);
385 return error;
386 }
387
388 /* No need to set GO bit here */
389 return 0;
390 }
391
392 error = regmap_write(haptics->regmap, DRV260X_GO, DRV260X_GO_BIT);
393 if (error) {
394 dev_err(&haptics->client->dev,
395 "Failed to write GO register: %d\n",
396 error);
397 return error;
398 }
399
400 do {
401 usleep_range(15000, 15500);
402 error = regmap_read(haptics->regmap, DRV260X_GO, &cal_buf);
403 if (error) {
404 dev_err(&haptics->client->dev,
405 "Failed to read GO register: %d\n",
406 error);
407 return error;
408 }
409 } while (cal_buf == DRV260X_GO_BIT);
410
411 return 0;
412 }
413
414 static const struct regmap_config drv260x_regmap_config = {
415 .reg_bits = 8,
416 .val_bits = 8,
417
418 .max_register = DRV260X_MAX_REG,
419 .cache_type = REGCACHE_NONE,
420 };
421
422 static int drv260x_probe(struct i2c_client *client)
423 {
424 struct device *dev = &client->dev;
425 struct drv260x_data *haptics;
426 u32 voltage;
427 int error;
428
429 haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
430 if (!haptics)
431 return -ENOMEM;
432
433 error = device_property_read_u32(dev, "mode", &haptics->mode);
434 if (error) {
435 dev_err(dev, "Can't fetch 'mode' property: %d\n", error);
436 return error;
437 }
438
439 if (haptics->mode < DRV260X_LRA_MODE ||
440 haptics->mode > DRV260X_ERM_MODE) {
441 dev_err(dev, "Vibrator mode is invalid: %i\n", haptics->mode);
442 return -EINVAL;
443 }
444
445 error = device_property_read_u32(dev, "library-sel", &haptics->library);
446 if (error) {
447 dev_err(dev, "Can't fetch 'library-sel' property: %d\n", error);
448 return error;
449 }
450
451 if (haptics->library < DRV260X_LIB_EMPTY ||
452 haptics->library > DRV260X_ERM_LIB_F) {
453 dev_err(dev,
454 "Library value is invalid: %i\n", haptics->library);
455 return -EINVAL;
456 }
457
458 if (haptics->mode == DRV260X_LRA_MODE &&
459 haptics->library != DRV260X_LIB_EMPTY &&
460 haptics->library != DRV260X_LIB_LRA) {
461 dev_err(dev, "LRA Mode with ERM Library mismatch\n");
462 return -EINVAL;
463 }
464
465 if (haptics->mode == DRV260X_ERM_MODE &&
466 (haptics->library == DRV260X_LIB_EMPTY ||
467 haptics->library == DRV260X_LIB_LRA)) {
468 dev_err(dev, "ERM Mode with LRA Library mismatch\n");
469 return -EINVAL;
470 }
471
472 error = device_property_read_u32(dev, "vib-rated-mv", &voltage);
473 haptics->rated_voltage = error ? DRV260X_DEF_RATED_VOLT :
474 drv260x_calculate_voltage(voltage);
475
476 error = device_property_read_u32(dev, "vib-overdrive-mv", &voltage);
477 haptics->overdrive_voltage = error ? DRV260X_DEF_OD_CLAMP_VOLT :
478 drv260x_calculate_voltage(voltage);
479
480 haptics->regulator = devm_regulator_get(dev, "vbat");
481 if (IS_ERR(haptics->regulator)) {
482 error = PTR_ERR(haptics->regulator);
483 dev_err(dev, "unable to get regulator, error: %d\n", error);
484 return error;
485 }
486
487 haptics->enable_gpio = devm_gpiod_get_optional(dev, "enable",
488 GPIOD_OUT_HIGH);
489 if (IS_ERR(haptics->enable_gpio))
490 return PTR_ERR(haptics->enable_gpio);
491
492 haptics->input_dev = devm_input_allocate_device(dev);
493 if (!haptics->input_dev) {
494 dev_err(dev, "Failed to allocate input device\n");
495 return -ENOMEM;
496 }
497
498 haptics->input_dev->name = "drv260x:haptics";
499 haptics->input_dev->close = drv260x_close;
500 input_set_drvdata(haptics->input_dev, haptics);
501 input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
502
503 error = input_ff_create_memless(haptics->input_dev, NULL,
504 drv260x_haptics_play);
505 if (error) {
506 dev_err(dev, "input_ff_create() failed: %d\n", error);
507 return error;
508 }
509
510 INIT_WORK(&haptics->work, drv260x_worker);
511
512 haptics->client = client;
513 i2c_set_clientdata(client, haptics);
514
515 haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config);
516 if (IS_ERR(haptics->regmap)) {
517 error = PTR_ERR(haptics->regmap);
518 dev_err(dev, "Failed to allocate register map: %d\n", error);
519 return error;
520 }
521
522 error = drv260x_init(haptics);
523 if (error) {
524 dev_err(dev, "Device init failed: %d\n", error);
525 return error;
526 }
527
528 error = input_register_device(haptics->input_dev);
529 if (error) {
530 dev_err(dev, "couldn't register input device: %d\n", error);
531 return error;
532 }
533
534 return 0;
535 }
536
537 static int drv260x_suspend(struct device *dev)
538 {
539 struct drv260x_data *haptics = dev_get_drvdata(dev);
540 int error;
541
542 guard(mutex)(&haptics->input_dev->mutex);
543
544 if (input_device_enabled(haptics->input_dev)) {
545 error = regmap_update_bits(haptics->regmap,
546 DRV260X_MODE,
547 DRV260X_STANDBY_MASK,
548 DRV260X_STANDBY);
549 if (error) {
550 dev_err(dev, "Failed to set standby mode\n");
551 return error;
552 }
553
554 gpiod_set_value(haptics->enable_gpio, 0);
555
556 error = regulator_disable(haptics->regulator);
557 if (error) {
558 dev_err(dev, "Failed to disable regulator\n");
559 regmap_update_bits(haptics->regmap,
560 DRV260X_MODE,
561 DRV260X_STANDBY_MASK, 0);
562 return error;
563 }
564 }
565
566 return 0;
567 }
568
569 static int drv260x_resume(struct device *dev)
570 {
571 struct drv260x_data *haptics = dev_get_drvdata(dev);
572 int error;
573
574 guard(mutex)(&haptics->input_dev->mutex);
575
576 if (input_device_enabled(haptics->input_dev)) {
577 error = regulator_enable(haptics->regulator);
578 if (error) {
579 dev_err(dev, "Failed to enable regulator\n");
580 return error;
581 }
582
583 error = regmap_update_bits(haptics->regmap,
584 DRV260X_MODE,
585 DRV260X_STANDBY_MASK, 0);
586 if (error) {
587 dev_err(dev, "Failed to unset standby mode\n");
588 regulator_disable(haptics->regulator);
589 return error;
590 }
591
592 gpiod_set_value(haptics->enable_gpio, 1);
593 }
594
595 return 0;
596 }
597
598 static DEFINE_SIMPLE_DEV_PM_OPS(drv260x_pm_ops, drv260x_suspend, drv260x_resume);
599
600 static const struct i2c_device_id drv260x_id[] = {
601 { "drv2605l" },
602 { }
603 };
604 MODULE_DEVICE_TABLE(i2c, drv260x_id);
605
606 static const struct of_device_id drv260x_of_match[] = {
607 { .compatible = "ti,drv2604", },
608 { .compatible = "ti,drv2604l", },
609 { .compatible = "ti,drv2605", },
610 { .compatible = "ti,drv2605l", },
611 { }
612 };
613 MODULE_DEVICE_TABLE(of, drv260x_of_match);
614
615 static struct i2c_driver drv260x_driver = {
616 .probe = drv260x_probe,
617 .driver = {
618 .name = "drv260x-haptics",
619 .of_match_table = drv260x_of_match,
620 .pm = pm_sleep_ptr(&drv260x_pm_ops),
621 },
622 .id_table = drv260x_id,
623 };
624 module_i2c_driver(drv260x_driver);
625
626 MODULE_DESCRIPTION("TI DRV260x haptics driver");
627 MODULE_LICENSE("GPL");
628 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
Kernel DRM miscellaneous fixes and cross-tree changes