printf: Remove unused 'bprintf'

[drm/drm-misc.git] / fs / pipe.c

// SPDX-License-Identifier: GPL-2.0
/*
 *  linux/fs/pipe.c
 *
 *  Copyright (C) 1991, 1992, 1999  Linus Torvalds
 */

#include <linux/mm.h>
#include <linux/file.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/log2.h>
#include <linux/mount.h>
#include <linux/pseudo_fs.h>
#include <linux/magic.h>
#include <linux/pipe_fs_i.h>
#include <linux/uio.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/audit.h>
#include <linux/syscalls.h>
#include <linux/fcntl.h>
#include <linux/memcontrol.h>
#include <linux/watch_queue.h>
#include <linux/sysctl.h>

#include <linux/uaccess.h>
#include <asm/ioctls.h>

#include "internal.h"

/*
 * New pipe buffers will be restricted to this size while the user is exceeding
 * their pipe buffer quota. The general pipe use case needs at least two
 * buffers: one for data yet to be read, and one for new data. If this is less
 * than two, then a write to a non-empty pipe may block even if the pipe is not
 * full. This can occur with GNU make jobserver or similar uses of pipes as
 * semaphores: multiple processes may be waiting to write tokens back to the
 * pipe before reading tokens: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/.
 *
 * Users can reduce their pipe buffers with F_SETPIPE_SZ below this at their
 * own risk, namely: pipe writes to non-full pipes may block until the pipe is
 * emptied.
 */
#define PIPE_MIN_DEF_BUFFERS 2

/*
 * The max size that a non-root user is allowed to grow the pipe. Can
 * be set by root in /proc/sys/fs/pipe-max-size
 */
static unsigned int pipe_max_size = 1048576;

/* Maximum allocatable pages per user. Hard limit is unset by default, soft
 * matches default values.
 */
static unsigned long pipe_user_pages_hard;
static unsigned long pipe_user_pages_soft = PIPE_DEF_BUFFERS * INR_OPEN_CUR;

/*
 * We use head and tail indices that aren't masked off, except at the point of
 * dereference, but rather they're allowed to wrap naturally.  This means there
 * isn't a dead spot in the buffer, but the ring has to be a power of two and
 * <= 2^31.
 * -- David Howells 2019-09-23.
 *
 * Reads with count = 0 should always return 0.
 * -- Julian Bradfield 1999-06-07.
 *
 * FIFOs and Pipes now generate SIGIO for both readers and writers.
 * -- Jeremy Elson <jelson@circlemud.org> 2001-08-16
 *
 * pipe_read & write cleanup
 * -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
 */

#define cmp_int(l, r)           ((l > r) - (l < r))

#ifdef CONFIG_PROVE_LOCKING
static int pipe_lock_cmp_fn(const struct lockdep_map *a,
                            const struct lockdep_map *b)
{
        return cmp_int((unsigned long) a, (unsigned long) b);
}
#endif

void pipe_lock(struct pipe_inode_info *pipe)
{
        if (pipe->files)
                mutex_lock(&pipe->mutex);
}
EXPORT_SYMBOL(pipe_lock);

void pipe_unlock(struct pipe_inode_info *pipe)
{
        if (pipe->files)
                mutex_unlock(&pipe->mutex);
}
EXPORT_SYMBOL(pipe_unlock);

void pipe_double_lock(struct pipe_inode_info *pipe1,
                      struct pipe_inode_info *pipe2)
{
        BUG_ON(pipe1 == pipe2);

        if (pipe1 > pipe2)
                swap(pipe1, pipe2);

        pipe_lock(pipe1);
        pipe_lock(pipe2);
}

static void anon_pipe_buf_release(struct pipe_inode_info *pipe,
                                  struct pipe_buffer *buf)
{
        struct page *page = buf->page;

        /*
         * If nobody else uses this page, and we don't already have a
         * temporary page, let's keep track of it as a one-deep
         * allocation cache. (Otherwise just release our reference to it)
         */
        if (page_count(page) == 1 && !pipe->tmp_page)
                pipe->tmp_page = page;
        else
                put_page(page);
}

static bool anon_pipe_buf_try_steal(struct pipe_inode_info *pipe,
                struct pipe_buffer *buf)
{
        struct page *page = buf->page;

        if (page_count(page) != 1)
                return false;
        memcg_kmem_uncharge_page(page, 0);
        __SetPageLocked(page);
        return true;
}

/**
 * generic_pipe_buf_try_steal - attempt to take ownership of a &pipe_buffer
 * @pipe:       the pipe that the buffer belongs to
 * @buf:        the buffer to attempt to steal
 *
 * Description:
 *      This function attempts to steal the &struct page attached to
 *      @buf. If successful, this function returns 0 and returns with
 *      the page locked. The caller may then reuse the page for whatever
 *      he wishes; the typical use is insertion into a different file
 *      page cache.
 */
bool generic_pipe_buf_try_steal(struct pipe_inode_info *pipe,
                struct pipe_buffer *buf)
{
        struct page *page = buf->page;

        /*
         * A reference of one is golden, that means that the owner of this
         * page is the only one holding a reference to it. lock the page
         * and return OK.
         */
        if (page_count(page) == 1) {
                lock_page(page);
                return true;
        }
        return false;
}
EXPORT_SYMBOL(generic_pipe_buf_try_steal);

/**
 * generic_pipe_buf_get - get a reference to a &struct pipe_buffer
 * @pipe:       the pipe that the buffer belongs to
 * @buf:        the buffer to get a reference to
 *
 * Description:
 *      This function grabs an extra reference to @buf. It's used in
 *      the tee() system call, when we duplicate the buffers in one
 *      pipe into another.
 */
bool generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
{
        return try_get_page(buf->page);
}
EXPORT_SYMBOL(generic_pipe_buf_get);

/**
 * generic_pipe_buf_release - put a reference to a &struct pipe_buffer
 * @pipe:       the pipe that the buffer belongs to
 * @buf:        the buffer to put a reference to
 *
 * Description:
 *      This function releases a reference to @buf.
 */
void generic_pipe_buf_release(struct pipe_inode_info *pipe,
                              struct pipe_buffer *buf)
{
        put_page(buf->page);
}
EXPORT_SYMBOL(generic_pipe_buf_release);

static const struct pipe_buf_operations anon_pipe_buf_ops = {
        .release        = anon_pipe_buf_release,
        .try_steal      = anon_pipe_buf_try_steal,
        .get            = generic_pipe_buf_get,
};

/* Done while waiting without holding the pipe lock - thus the READ_ONCE() */
static inline bool pipe_readable(const struct pipe_inode_info *pipe)
{
        unsigned int head = READ_ONCE(pipe->head);
        unsigned int tail = READ_ONCE(pipe->tail);
        unsigned int writers = READ_ONCE(pipe->writers);

        return !pipe_empty(head, tail) || !writers;
}

static inline unsigned int pipe_update_tail(struct pipe_inode_info *pipe,
                                            struct pipe_buffer *buf,
                                            unsigned int tail)
{
        pipe_buf_release(pipe, buf);

        /*
         * If the pipe has a watch_queue, we need additional protection
         * by the spinlock because notifications get posted with only
         * this spinlock, no mutex
         */
        if (pipe_has_watch_queue(pipe)) {
                spin_lock_irq(&pipe->rd_wait.lock);
#ifdef CONFIG_WATCH_QUEUE
                if (buf->flags & PIPE_BUF_FLAG_LOSS)
                        pipe->note_loss = true;
#endif
                pipe->tail = ++tail;
                spin_unlock_irq(&pipe->rd_wait.lock);
                return tail;
        }

        /*
         * Without a watch_queue, we can simply increment the tail
         * without the spinlock - the mutex is enough.
         */
        pipe->tail = ++tail;
        return tail;
}

static ssize_t
pipe_read(struct kiocb *iocb, struct iov_iter *to)
{
        size_t total_len = iov_iter_count(to);
        struct file *filp = iocb->ki_filp;
        struct pipe_inode_info *pipe = filp->private_data;
        bool was_full, wake_next_reader = false;
        ssize_t ret;

        /* Null read succeeds. */
        if (unlikely(total_len == 0))
                return 0;

        ret = 0;
        mutex_lock(&pipe->mutex);

        /*
         * We only wake up writers if the pipe was full when we started
         * reading in order to avoid unnecessary wakeups.
         *
         * But when we do wake up writers, we do so using a sync wakeup
         * (WF_SYNC), because we want them to get going and generate more
         * data for us.
         */
        was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
        for (;;) {
                /* Read ->head with a barrier vs post_one_notification() */
                unsigned int head = smp_load_acquire(&pipe->head);
                unsigned int tail = pipe->tail;
                unsigned int mask = pipe->ring_size - 1;

#ifdef CONFIG_WATCH_QUEUE
                if (pipe->note_loss) {
                        struct watch_notification n;

                        if (total_len < 8) {
                                if (ret == 0)
                                        ret = -ENOBUFS;
                                break;
                        }

                        n.type = WATCH_TYPE_META;
                        n.subtype = WATCH_META_LOSS_NOTIFICATION;
                        n.info = watch_sizeof(n);
                        if (copy_to_iter(&n, sizeof(n), to) != sizeof(n)) {
                                if (ret == 0)
                                        ret = -EFAULT;
                                break;
                        }
                        ret += sizeof(n);
                        total_len -= sizeof(n);
                        pipe->note_loss = false;
                }
#endif

                if (!pipe_empty(head, tail)) {
                        struct pipe_buffer *buf = &pipe->bufs[tail & mask];
                        size_t chars = buf->len;
                        size_t written;
                        int error;

                        if (chars > total_len) {
                                if (buf->flags & PIPE_BUF_FLAG_WHOLE) {
                                        if (ret == 0)
                                                ret = -ENOBUFS;
                                        break;
                                }
                                chars = total_len;
                        }

                        error = pipe_buf_confirm(pipe, buf);
                        if (error) {
                                if (!ret)
                                        ret = error;
                                break;
                        }

                        written = copy_page_to_iter(buf->page, buf->offset, chars, to);
                        if (unlikely(written < chars)) {
                                if (!ret)
                                        ret = -EFAULT;
                                break;
                        }
                        ret += chars;
                        buf->offset += chars;
                        buf->len -= chars;

                        /* Was it a packet buffer? Clean up and exit */
                        if (buf->flags & PIPE_BUF_FLAG_PACKET) {
                                total_len = chars;
                                buf->len = 0;
                        }

                        if (!buf->len)
                                tail = pipe_update_tail(pipe, buf, tail);
                        total_len -= chars;
                        if (!total_len)
                                break;  /* common path: read succeeded */
                        if (!pipe_empty(head, tail))    /* More to do? */
                                continue;
                }

                if (!pipe->writers)
                        break;
                if (ret)
                        break;
                if ((filp->f_flags & O_NONBLOCK) ||
                    (iocb->ki_flags & IOCB_NOWAIT)) {
                        ret = -EAGAIN;
                        break;
                }
                mutex_unlock(&pipe->mutex);

                /*
                 * We only get here if we didn't actually read anything.
                 *
                 * However, we could have seen (and removed) a zero-sized
                 * pipe buffer, and might have made space in the buffers
                 * that way.
                 *
                 * You can't make zero-sized pipe buffers by doing an empty
                 * write (not even in packet mode), but they can happen if
                 * the writer gets an EFAULT when trying to fill a buffer
                 * that already got allocated and inserted in the buffer
                 * array.
                 *
                 * So we still need to wake up any pending writers in the
                 * _very_ unlikely case that the pipe was full, but we got
                 * no data.
                 */
                if (unlikely(was_full))
                        wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
                kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);

                /*
                 * But because we didn't read anything, at this point we can
                 * just return directly with -ERESTARTSYS if we're interrupted,
                 * since we've done any required wakeups and there's no need
                 * to mark anything accessed. And we've dropped the lock.
                 */
                if (wait_event_interruptible_exclusive(pipe->rd_wait, pipe_readable(pipe)) < 0)
                        return -ERESTARTSYS;

                mutex_lock(&pipe->mutex);
                was_full = pipe_full(pipe->head, pipe->tail, pipe->max_usage);
                wake_next_reader = true;
        }
        if (pipe_empty(pipe->head, pipe->tail))
                wake_next_reader = false;
        mutex_unlock(&pipe->mutex);

        if (was_full)
                wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
        if (wake_next_reader)
                wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
        kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
        if (ret > 0)
                file_accessed(filp);
        return ret;
}

static inline int is_packetized(struct file *file)
{
        return (file->f_flags & O_DIRECT) != 0;
}

/* Done while waiting without holding the pipe lock - thus the READ_ONCE() */
static inline bool pipe_writable(const struct pipe_inode_info *pipe)
{
        unsigned int head = READ_ONCE(pipe->head);
        unsigned int tail = READ_ONCE(pipe->tail);
        unsigned int max_usage = READ_ONCE(pipe->max_usage);

        return !pipe_full(head, tail, max_usage) ||
                !READ_ONCE(pipe->readers);
}

static ssize_t
pipe_write(struct kiocb *iocb, struct iov_iter *from)
{
        struct file *filp = iocb->ki_filp;
        struct pipe_inode_info *pipe = filp->private_data;
        unsigned int head;
        ssize_t ret = 0;
        size_t total_len = iov_iter_count(from);
        ssize_t chars;
        bool was_empty = false;
        bool wake_next_writer = false;

        /*
         * Reject writing to watch queue pipes before the point where we lock
         * the pipe.
         * Otherwise, lockdep would be unhappy if the caller already has another
         * pipe locked.
         * If we had to support locking a normal pipe and a notification pipe at
         * the same time, we could set up lockdep annotations for that, but
         * since we don't actually need that, it's simpler to just bail here.
         */
        if (pipe_has_watch_queue(pipe))
                return -EXDEV;

        /* Null write succeeds. */
        if (unlikely(total_len == 0))
                return 0;

        mutex_lock(&pipe->mutex);

        if (!pipe->readers) {
                send_sig(SIGPIPE, current, 0);
                ret = -EPIPE;
                goto out;
        }

        /*
         * If it wasn't empty we try to merge new data into
         * the last buffer.
         *
         * That naturally merges small writes, but it also
         * page-aligns the rest of the writes for large writes
         * spanning multiple pages.
         */
        head = pipe->head;
        was_empty = pipe_empty(head, pipe->tail);
        chars = total_len & (PAGE_SIZE-1);
        if (chars && !was_empty) {
                unsigned int mask = pipe->ring_size - 1;
                struct pipe_buffer *buf = &pipe->bufs[(head - 1) & mask];
                int offset = buf->offset + buf->len;

                if ((buf->flags & PIPE_BUF_FLAG_CAN_MERGE) &&
                    offset + chars <= PAGE_SIZE) {
                        ret = pipe_buf_confirm(pipe, buf);
                        if (ret)
                                goto out;

                        ret = copy_page_from_iter(buf->page, offset, chars, from);
                        if (unlikely(ret < chars)) {
                                ret = -EFAULT;
                                goto out;
                        }

                        buf->len += ret;
                        if (!iov_iter_count(from))
                                goto out;
                }
        }

        for (;;) {
                if (!pipe->readers) {
                        send_sig(SIGPIPE, current, 0);
                        if (!ret)
                                ret = -EPIPE;
                        break;
                }

                head = pipe->head;
                if (!pipe_full(head, pipe->tail, pipe->max_usage)) {
                        unsigned int mask = pipe->ring_size - 1;
                        struct pipe_buffer *buf;
                        struct page *page = pipe->tmp_page;
                        int copied;

                        if (!page) {
                                page = alloc_page(GFP_HIGHUSER | __GFP_ACCOUNT);
                                if (unlikely(!page)) {
                                        ret = ret ? : -ENOMEM;
                                        break;
                                }
                                pipe->tmp_page = page;
                        }

                        /* Allocate a slot in the ring in advance and attach an
                         * empty buffer.  If we fault or otherwise fail to use
                         * it, either the reader will consume it or it'll still
                         * be there for the next write.
                         */
                        pipe->head = head + 1;

                        /* Insert it into the buffer array */
                        buf = &pipe->bufs[head & mask];
                        buf->page = page;
                        buf->ops = &anon_pipe_buf_ops;
                        buf->offset = 0;
                        buf->len = 0;
                        if (is_packetized(filp))
                                buf->flags = PIPE_BUF_FLAG_PACKET;
                        else
                                buf->flags = PIPE_BUF_FLAG_CAN_MERGE;
                        pipe->tmp_page = NULL;

                        copied = copy_page_from_iter(page, 0, PAGE_SIZE, from);
                        if (unlikely(copied < PAGE_SIZE && iov_iter_count(from))) {
                                if (!ret)
                                        ret = -EFAULT;
                                break;
                        }
                        ret += copied;
                        buf->len = copied;

                        if (!iov_iter_count(from))
                                break;
                }

                if (!pipe_full(head, pipe->tail, pipe->max_usage))
                        continue;

                /* Wait for buffer space to become available. */
                if ((filp->f_flags & O_NONBLOCK) ||
                    (iocb->ki_flags & IOCB_NOWAIT)) {
                        if (!ret)
                                ret = -EAGAIN;
                        break;
                }
                if (signal_pending(current)) {
                        if (!ret)
                                ret = -ERESTARTSYS;
                        break;
                }

                /*
                 * We're going to release the pipe lock and wait for more
                 * space. We wake up any readers if necessary, and then
                 * after waiting we need to re-check whether the pipe
                 * become empty while we dropped the lock.
                 */
                mutex_unlock(&pipe->mutex);
                if (was_empty)
                        wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
                kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
                wait_event_interruptible_exclusive(pipe->wr_wait, pipe_writable(pipe));
                mutex_lock(&pipe->mutex);
                was_empty = pipe_empty(pipe->head, pipe->tail);
                wake_next_writer = true;
        }
out:
        if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
                wake_next_writer = false;
        mutex_unlock(&pipe->mutex);

        /*
         * If we do do a wakeup event, we do a 'sync' wakeup, because we
         * want the reader to start processing things asap, rather than
         * leave the data pending.
         *
         * This is particularly important for small writes, because of
         * how (for example) the GNU make jobserver uses small writes to
         * wake up pending jobs
         *
         * Epoll nonsensically wants a wakeup whether the pipe
         * was already empty or not.
         */
        if (was_empty || pipe->poll_usage)
                wake_up_interruptible_sync_poll(&pipe->rd_wait, EPOLLIN | EPOLLRDNORM);
        kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
        if (wake_next_writer)
                wake_up_interruptible_sync_poll(&pipe->wr_wait, EPOLLOUT | EPOLLWRNORM);
        if (ret > 0 && sb_start_write_trylock(file_inode(filp)->i_sb)) {
                int err = file_update_time(filp);
                if (err)
                        ret = err;
                sb_end_write(file_inode(filp)->i_sb);
        }
        return ret;
}

static long pipe_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
        struct pipe_inode_info *pipe = filp->private_data;
        unsigned int count, head, tail, mask;

        switch (cmd) {
        case FIONREAD:
                mutex_lock(&pipe->mutex);
                count = 0;
                head = pipe->head;
                tail = pipe->tail;
                mask = pipe->ring_size - 1;

                while (tail != head) {
                        count += pipe->bufs[tail & mask].len;
                        tail++;
                }
                mutex_unlock(&pipe->mutex);

                return put_user(count, (int __user *)arg);

#ifdef CONFIG_WATCH_QUEUE
        case IOC_WATCH_QUEUE_SET_SIZE: {
                int ret;
                mutex_lock(&pipe->mutex);
                ret = watch_queue_set_size(pipe, arg);
                mutex_unlock(&pipe->mutex);
                return ret;
        }

        case IOC_WATCH_QUEUE_SET_FILTER:
                return watch_queue_set_filter(
                        pipe, (struct watch_notification_filter __user *)arg);
#endif

        default:
                return -ENOIOCTLCMD;
        }
}

/* No kernel lock held - fine */
static __poll_t
pipe_poll(struct file *filp, poll_table *wait)
{
        __poll_t mask;
        struct pipe_inode_info *pipe = filp->private_data;
        unsigned int head, tail;

        /* Epoll has some historical nasty semantics, this enables them */
        WRITE_ONCE(pipe->poll_usage, true);

        /*
         * Reading pipe state only -- no need for acquiring the semaphore.
         *
         * But because this is racy, the code has to add the
         * entry to the poll table _first_ ..
         */
        if (filp->f_mode & FMODE_READ)
                poll_wait(filp, &pipe->rd_wait, wait);
        if (filp->f_mode & FMODE_WRITE)
                poll_wait(filp, &pipe->wr_wait, wait);

        /*
         * .. and only then can you do the racy tests. That way,
         * if something changes and you got it wrong, the poll
         * table entry will wake you up and fix it.
         */
        head = READ_ONCE(pipe->head);
        tail = READ_ONCE(pipe->tail);

        mask = 0;
        if (filp->f_mode & FMODE_READ) {
                if (!pipe_empty(head, tail))
                        mask |= EPOLLIN | EPOLLRDNORM;
                if (!pipe->writers && filp->f_pipe != pipe->w_counter)
                        mask |= EPOLLHUP;
        }

        if (filp->f_mode & FMODE_WRITE) {
                if (!pipe_full(head, tail, pipe->max_usage))
                        mask |= EPOLLOUT | EPOLLWRNORM;
                /*
                 * Most Unices do not set EPOLLERR for FIFOs but on Linux they
                 * behave exactly like pipes for poll().
                 */
                if (!pipe->readers)
                        mask |= EPOLLERR;
        }

        return mask;
}

static void put_pipe_info(struct inode *inode, struct pipe_inode_info *pipe)
{
        int kill = 0;

        spin_lock(&inode->i_lock);
        if (!--pipe->files) {
                inode->i_pipe = NULL;
                kill = 1;
        }
        spin_unlock(&inode->i_lock);

        if (kill)
                free_pipe_info(pipe);
}

static int
pipe_release(struct inode *inode, struct file *file)
{
        struct pipe_inode_info *pipe = file->private_data;

        mutex_lock(&pipe->mutex);
        if (file->f_mode & FMODE_READ)
                pipe->readers--;
        if (file->f_mode & FMODE_WRITE)
                pipe->writers--;

        /* Was that the last reader or writer, but not the other side? */
        if (!pipe->readers != !pipe->writers) {
                wake_up_interruptible_all(&pipe->rd_wait);
                wake_up_interruptible_all(&pipe->wr_wait);
                kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
                kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
        }
        mutex_unlock(&pipe->mutex);

        put_pipe_info(inode, pipe);
        return 0;
}

static int
pipe_fasync(int fd, struct file *filp, int on)
{
        struct pipe_inode_info *pipe = filp->private_data;
        int retval = 0;

        mutex_lock(&pipe->mutex);
        if (filp->f_mode & FMODE_READ)
                retval = fasync_helper(fd, filp, on, &pipe->fasync_readers);
        if ((filp->f_mode & FMODE_WRITE) && retval >= 0) {
                retval = fasync_helper(fd, filp, on, &pipe->fasync_writers);
                if (retval < 0 && (filp->f_mode & FMODE_READ))
                        /* this can happen only if on == T */
                        fasync_helper(-1, filp, 0, &pipe->fasync_readers);
        }
        mutex_unlock(&pipe->mutex);
        return retval;
}

unsigned long account_pipe_buffers(struct user_struct *user,
                                   unsigned long old, unsigned long new)
{
        return atomic_long_add_return(new - old, &user->pipe_bufs);
}

bool too_many_pipe_buffers_soft(unsigned long user_bufs)
{
        unsigned long soft_limit = READ_ONCE(pipe_user_pages_soft);

        return soft_limit && user_bufs > soft_limit;
}

bool too_many_pipe_buffers_hard(unsigned long user_bufs)
{
        unsigned long hard_limit = READ_ONCE(pipe_user_pages_hard);

        return hard_limit && user_bufs > hard_limit;
}

bool pipe_is_unprivileged_user(void)
{
        return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN);
}

struct pipe_inode_info *alloc_pipe_info(void)
{
        struct pipe_inode_info *pipe;
        unsigned long pipe_bufs = PIPE_DEF_BUFFERS;
        struct user_struct *user = get_current_user();
        unsigned long user_bufs;
        unsigned int max_size = READ_ONCE(pipe_max_size);

        pipe = kzalloc(sizeof(struct pipe_inode_info), GFP_KERNEL_ACCOUNT);
        if (pipe == NULL)
                goto out_free_uid;

        if (pipe_bufs * PAGE_SIZE > max_size && !capable(CAP_SYS_RESOURCE))
                pipe_bufs = max_size >> PAGE_SHIFT;

        user_bufs = account_pipe_buffers(user, 0, pipe_bufs);

        if (too_many_pipe_buffers_soft(user_bufs) && pipe_is_unprivileged_user()) {
                user_bufs = account_pipe_buffers(user, pipe_bufs, PIPE_MIN_DEF_BUFFERS);
                pipe_bufs = PIPE_MIN_DEF_BUFFERS;
        }

        if (too_many_pipe_buffers_hard(user_bufs) && pipe_is_unprivileged_user())
                goto out_revert_acct;

        pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer),
                             GFP_KERNEL_ACCOUNT);

        if (pipe->bufs) {
                init_waitqueue_head(&pipe->rd_wait);
                init_waitqueue_head(&pipe->wr_wait);
                pipe->r_counter = pipe->w_counter = 1;
                pipe->max_usage = pipe_bufs;
                pipe->ring_size = pipe_bufs;
                pipe->nr_accounted = pipe_bufs;
                pipe->user = user;
                mutex_init(&pipe->mutex);
                lock_set_cmp_fn(&pipe->mutex, pipe_lock_cmp_fn, NULL);
                return pipe;
        }

out_revert_acct:
        (void) account_pipe_buffers(user, pipe_bufs, 0);
        kfree(pipe);
out_free_uid:
        free_uid(user);
        return NULL;
}

void free_pipe_info(struct pipe_inode_info *pipe)
{
        unsigned int i;

#ifdef CONFIG_WATCH_QUEUE
        if (pipe->watch_queue)
                watch_queue_clear(pipe->watch_queue);
#endif

        (void) account_pipe_buffers(pipe->user, pipe->nr_accounted, 0);
        free_uid(pipe->user);
        for (i = 0; i < pipe->ring_size; i++) {
                struct pipe_buffer *buf = pipe->bufs + i;
                if (buf->ops)
                        pipe_buf_release(pipe, buf);
        }
#ifdef CONFIG_WATCH_QUEUE
        if (pipe->watch_queue)
                put_watch_queue(pipe->watch_queue);
#endif
        if (pipe->tmp_page)
                __free_page(pipe->tmp_page);
        kfree(pipe->bufs);
        kfree(pipe);
}

static struct vfsmount *pipe_mnt __ro_after_init;

/*
 * pipefs_dname() is called from d_path().
 */
static char *pipefs_dname(struct dentry *dentry, char *buffer, int buflen)
{
        return dynamic_dname(buffer, buflen, "pipe:[%lu]",
                                d_inode(dentry)->i_ino);
}

static const struct dentry_operations pipefs_dentry_operations = {
        .d_dname        = pipefs_dname,
};

static struct inode * get_pipe_inode(void)
{
        struct inode *inode = new_inode_pseudo(pipe_mnt->mnt_sb);
        struct pipe_inode_info *pipe;

        if (!inode)
                goto fail_inode;

        inode->i_ino = get_next_ino();

        pipe = alloc_pipe_info();
        if (!pipe)
                goto fail_iput;

        inode->i_pipe = pipe;
        pipe->files = 2;
        pipe->readers = pipe->writers = 1;
        inode->i_fop = &pipefifo_fops;

        /*
         * Mark the inode dirty from the very beginning,
         * that way it will never be moved to the dirty
         * list because "mark_inode_dirty()" will think
         * that it already _is_ on the dirty list.
         */
        inode->i_state = I_DIRTY;
        inode->i_mode = S_IFIFO | S_IRUSR | S_IWUSR;
        inode->i_uid = current_fsuid();
        inode->i_gid = current_fsgid();
        simple_inode_init_ts(inode);

        return inode;

fail_iput:
        iput(inode);

fail_inode:
        return NULL;
}

int create_pipe_files(struct file **res, int flags)
{
        struct inode *inode = get_pipe_inode();
        struct file *f;
        int error;

        if (!inode)
                return -ENFILE;

        if (flags & O_NOTIFICATION_PIPE) {
                error = watch_queue_init(inode->i_pipe);
                if (error) {
                        free_pipe_info(inode->i_pipe);
                        iput(inode);
                        return error;
                }
        }

        f = alloc_file_pseudo(inode, pipe_mnt, "",
                                O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)),
                                &pipefifo_fops);
        if (IS_ERR(f)) {
                free_pipe_info(inode->i_pipe);
                iput(inode);
                return PTR_ERR(f);
        }

        f->private_data = inode->i_pipe;
        f->f_pipe = 0;

        res[0] = alloc_file_clone(f, O_RDONLY | (flags & O_NONBLOCK),
                                  &pipefifo_fops);
        if (IS_ERR(res[0])) {
                put_pipe_info(inode, inode->i_pipe);
                fput(f);
                return PTR_ERR(res[0]);
        }
        res[0]->private_data = inode->i_pipe;
        res[0]->f_pipe = 0;
        res[1] = f;
        stream_open(inode, res[0]);
        stream_open(inode, res[1]);
        return 0;
}

static int __do_pipe_flags(int *fd, struct file **files, int flags)
{
        int error;
        int fdw, fdr;

        if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT | O_NOTIFICATION_PIPE))
                return -EINVAL;

        error = create_pipe_files(files, flags);
        if (error)
                return error;

        error = get_unused_fd_flags(flags);
        if (error < 0)
                goto err_read_pipe;
        fdr = error;

        error = get_unused_fd_flags(flags);
        if (error < 0)
                goto err_fdr;
        fdw = error;

        audit_fd_pair(fdr, fdw);
        fd[0] = fdr;
        fd[1] = fdw;
        /* pipe groks IOCB_NOWAIT */
        files[0]->f_mode |= FMODE_NOWAIT;
        files[1]->f_mode |= FMODE_NOWAIT;
        return 0;

 err_fdr:
        put_unused_fd(fdr);
 err_read_pipe:
        fput(files[0]);
        fput(files[1]);
        return error;
}

int do_pipe_flags(int *fd, int flags)
{
        struct file *files[2];
        int error = __do_pipe_flags(fd, files, flags);
        if (!error) {
                fd_install(fd[0], files[0]);
                fd_install(fd[1], files[1]);
        }
        return error;
}

/*
 * sys_pipe() is the normal C calling standard for creating
 * a pipe. It's not the way Unix traditionally does this, though.
 */
static int do_pipe2(int __user *fildes, int flags)
{
        struct file *files[2];
        int fd[2];
        int error;

        error = __do_pipe_flags(fd, files, flags);
        if (!error) {
                if (unlikely(copy_to_user(fildes, fd, sizeof(fd)))) {
                        fput(files[0]);
                        fput(files[1]);
                        put_unused_fd(fd[0]);
                        put_unused_fd(fd[1]);
                        error = -EFAULT;
                } else {
                        fd_install(fd[0], files[0]);
                        fd_install(fd[1], files[1]);
                }
        }
        return error;
}

SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
{
        return do_pipe2(fildes, flags);
}

SYSCALL_DEFINE1(pipe, int __user *, fildes)
{
        return do_pipe2(fildes, 0);
}

/*
 * This is the stupid "wait for pipe to be readable or writable"
 * model.
 *
 * See pipe_read/write() for the proper kind of exclusive wait,
 * but that requires that we wake up any other readers/writers
 * if we then do not end up reading everything (ie the whole
 * "wake_next_reader/writer" logic in pipe_read/write()).
 */
void pipe_wait_readable(struct pipe_inode_info *pipe)
{
        pipe_unlock(pipe);
        wait_event_interruptible(pipe->rd_wait, pipe_readable(pipe));
        pipe_lock(pipe);
}

void pipe_wait_writable(struct pipe_inode_info *pipe)
{
        pipe_unlock(pipe);
        wait_event_interruptible(pipe->wr_wait, pipe_writable(pipe));
        pipe_lock(pipe);
}

/*
 * This depends on both the wait (here) and the wakeup (wake_up_partner)
 * holding the pipe lock, so "*cnt" is stable and we know a wakeup cannot
 * race with the count check and waitqueue prep.
 *
 * Normally in order to avoid races, you'd do the prepare_to_wait() first,
 * then check the condition you're waiting for, and only then sleep. But
 * because of the pipe lock, we can check the condition before being on
 * the wait queue.
 *
 * We use the 'rd_wait' waitqueue for pipe partner waiting.
 */
static int wait_for_partner(struct pipe_inode_info *pipe, unsigned int *cnt)
{
        DEFINE_WAIT(rdwait);
        int cur = *cnt;

        while (cur == *cnt) {
                prepare_to_wait(&pipe->rd_wait, &rdwait, TASK_INTERRUPTIBLE);
                pipe_unlock(pipe);
                schedule();
                finish_wait(&pipe->rd_wait, &rdwait);
                pipe_lock(pipe);
                if (signal_pending(current))
                        break;
        }
        return cur == *cnt ? -ERESTARTSYS : 0;
}

static void wake_up_partner(struct pipe_inode_info *pipe)
{
        wake_up_interruptible_all(&pipe->rd_wait);
}

static int fifo_open(struct inode *inode, struct file *filp)
{
        struct pipe_inode_info *pipe;
        bool is_pipe = inode->i_sb->s_magic == PIPEFS_MAGIC;
        int ret;

        filp->f_pipe = 0;

        spin_lock(&inode->i_lock);
        if (inode->i_pipe) {
                pipe = inode->i_pipe;
                pipe->files++;
                spin_unlock(&inode->i_lock);
        } else {
                spin_unlock(&inode->i_lock);
                pipe = alloc_pipe_info();
                if (!pipe)
                        return -ENOMEM;
                pipe->files = 1;
                spin_lock(&inode->i_lock);
                if (unlikely(inode->i_pipe)) {
                        inode->i_pipe->files++;
                        spin_unlock(&inode->i_lock);
                        free_pipe_info(pipe);
                        pipe = inode->i_pipe;
                } else {
                        inode->i_pipe = pipe;
                        spin_unlock(&inode->i_lock);
                }
        }
        filp->private_data = pipe;
        /* OK, we have a pipe and it's pinned down */

        mutex_lock(&pipe->mutex);

        /* We can only do regular read/write on fifos */
        stream_open(inode, filp);

        switch (filp->f_mode & (FMODE_READ | FMODE_WRITE)) {
        case FMODE_READ:
        /*
         *  O_RDONLY
         *  POSIX.1 says that O_NONBLOCK means return with the FIFO
         *  opened, even when there is no process writing the FIFO.
         */
                pipe->r_counter++;
                if (pipe->readers++ == 0)
                        wake_up_partner(pipe);

                if (!is_pipe && !pipe->writers) {
                        if ((filp->f_flags & O_NONBLOCK)) {
                                /* suppress EPOLLHUP until we have
                                 * seen a writer */
                                filp->f_pipe = pipe->w_counter;
                        } else {
                                if (wait_for_partner(pipe, &pipe->w_counter))
                                        goto err_rd;
                        }
                }
                break;

        case FMODE_WRITE:
        /*
         *  O_WRONLY
         *  POSIX.1 says that O_NONBLOCK means return -1 with
         *  errno=ENXIO when there is no process reading the FIFO.
         */
                ret = -ENXIO;
                if (!is_pipe && (filp->f_flags & O_NONBLOCK) && !pipe->readers)
                        goto err;

                pipe->w_counter++;
                if (!pipe->writers++)
                        wake_up_partner(pipe);

                if (!is_pipe && !pipe->readers) {
                        if (wait_for_partner(pipe, &pipe->r_counter))
                                goto err_wr;
                }
                break;

        case FMODE_READ | FMODE_WRITE:
        /*
         *  O_RDWR
         *  POSIX.1 leaves this case "undefined" when O_NONBLOCK is set.
         *  This implementation will NEVER block on a O_RDWR open, since
         *  the process can at least talk to itself.
         */

                pipe->readers++;
                pipe->writers++;
                pipe->r_counter++;
                pipe->w_counter++;
                if (pipe->readers == 1 || pipe->writers == 1)
                        wake_up_partner(pipe);
                break;

        default:
                ret = -EINVAL;
                goto err;
        }

        /* Ok! */
        mutex_unlock(&pipe->mutex);
        return 0;

err_rd:
        if (!--pipe->readers)
                wake_up_interruptible(&pipe->wr_wait);
        ret = -ERESTARTSYS;
        goto err;

err_wr:
        if (!--pipe->writers)
                wake_up_interruptible_all(&pipe->rd_wait);
        ret = -ERESTARTSYS;
        goto err;

err:
        mutex_unlock(&pipe->mutex);

        put_pipe_info(inode, pipe);
        return ret;
}

const struct file_operations pipefifo_fops = {
        .open           = fifo_open,
        .read_iter      = pipe_read,
        .write_iter     = pipe_write,
        .poll           = pipe_poll,
        .unlocked_ioctl = pipe_ioctl,
        .release        = pipe_release,
        .fasync         = pipe_fasync,
        .splice_write   = iter_file_splice_write,
};

/*
 * Currently we rely on the pipe array holding a power-of-2 number
 * of pages. Returns 0 on error.
 */
unsigned int round_pipe_size(unsigned int size)
{
        if (size > (1U << 31))
                return 0;

        /* Minimum pipe size, as required by POSIX */
        if (size < PAGE_SIZE)
                return PAGE_SIZE;

        return roundup_pow_of_two(size);
}

/*
 * Resize the pipe ring to a number of slots.
 *
 * Note the pipe can be reduced in capacity, but only if the current
 * occupancy doesn't exceed nr_slots; if it does, EBUSY will be
 * returned instead.
 */
int pipe_resize_ring(struct pipe_inode_info *pipe, unsigned int nr_slots)
{
        struct pipe_buffer *bufs;
        unsigned int head, tail, mask, n;

        bufs = kcalloc(nr_slots, sizeof(*bufs),
                       GFP_KERNEL_ACCOUNT | __GFP_NOWARN);
        if (unlikely(!bufs))
                return -ENOMEM;

        spin_lock_irq(&pipe->rd_wait.lock);
        mask = pipe->ring_size - 1;
        head = pipe->head;
        tail = pipe->tail;

        n = pipe_occupancy(head, tail);
        if (nr_slots < n) {
                spin_unlock_irq(&pipe->rd_wait.lock);
                kfree(bufs);
                return -EBUSY;
        }

        /*
         * The pipe array wraps around, so just start the new one at zero
         * and adjust the indices.
         */
        if (n > 0) {
                unsigned int h = head & mask;
                unsigned int t = tail & mask;
                if (h > t) {
                        memcpy(bufs, pipe->bufs + t,
                               n * sizeof(struct pipe_buffer));
                } else {
                        unsigned int tsize = pipe->ring_size - t;
                        if (h > 0)
                                memcpy(bufs + tsize, pipe->bufs,
                                       h * sizeof(struct pipe_buffer));
                        memcpy(bufs, pipe->bufs + t,
                               tsize * sizeof(struct pipe_buffer));
                }
        }

        head = n;
        tail = 0;

        kfree(pipe->bufs);
        pipe->bufs = bufs;
        pipe->ring_size = nr_slots;
        if (pipe->max_usage > nr_slots)
                pipe->max_usage = nr_slots;
        pipe->tail = tail;
        pipe->head = head;

        if (!pipe_has_watch_queue(pipe)) {
                pipe->max_usage = nr_slots;
                pipe->nr_accounted = nr_slots;
        }

        spin_unlock_irq(&pipe->rd_wait.lock);

        /* This might have made more room for writers */
        wake_up_interruptible(&pipe->wr_wait);
        return 0;
}

/*
 * Allocate a new array of pipe buffers and copy the info over. Returns the
 * pipe size if successful, or return -ERROR on error.
 */
static long pipe_set_size(struct pipe_inode_info *pipe, unsigned int arg)
{
        unsigned long user_bufs;
        unsigned int nr_slots, size;
        long ret = 0;

        if (pipe_has_watch_queue(pipe))
                return -EBUSY;

        size = round_pipe_size(arg);
        nr_slots = size >> PAGE_SHIFT;

        if (!nr_slots)
                return -EINVAL;

        /*
         * If trying to increase the pipe capacity, check that an
         * unprivileged user is not trying to exceed various limits
         * (soft limit check here, hard limit check just below).
         * Decreasing the pipe capacity is always permitted, even
         * if the user is currently over a limit.
         */
        if (nr_slots > pipe->max_usage &&
                        size > pipe_max_size && !capable(CAP_SYS_RESOURCE))
                return -EPERM;

        user_bufs = account_pipe_buffers(pipe->user, pipe->nr_accounted, nr_slots);

        if (nr_slots > pipe->max_usage &&
                        (too_many_pipe_buffers_hard(user_bufs) ||
                         too_many_pipe_buffers_soft(user_bufs)) &&
                        pipe_is_unprivileged_user()) {
                ret = -EPERM;
                goto out_revert_acct;
        }

        ret = pipe_resize_ring(pipe, nr_slots);
        if (ret < 0)
                goto out_revert_acct;

        return pipe->max_usage * PAGE_SIZE;

out_revert_acct:
        (void) account_pipe_buffers(pipe->user, nr_slots, pipe->nr_accounted);
        return ret;
}

/*
 * Note that i_pipe and i_cdev share the same location, so checking ->i_pipe is
 * not enough to verify that this is a pipe.
 */
struct pipe_inode_info *get_pipe_info(struct file *file, bool for_splice)
{
        struct pipe_inode_info *pipe = file->private_data;

        if (file->f_op != &pipefifo_fops || !pipe)
                return NULL;
        if (for_splice && pipe_has_watch_queue(pipe))
                return NULL;
        return pipe;
}

long pipe_fcntl(struct file *file, unsigned int cmd, unsigned int arg)
{
        struct pipe_inode_info *pipe;
        long ret;

        pipe = get_pipe_info(file, false);
        if (!pipe)
                return -EBADF;

        mutex_lock(&pipe->mutex);

        switch (cmd) {
        case F_SETPIPE_SZ:
                ret = pipe_set_size(pipe, arg);
                break;
        case F_GETPIPE_SZ:
                ret = pipe->max_usage * PAGE_SIZE;
                break;
        default:
                ret = -EINVAL;
                break;
        }

        mutex_unlock(&pipe->mutex);
        return ret;
}

static const struct super_operations pipefs_ops = {
        .destroy_inode = free_inode_nonrcu,
        .statfs = simple_statfs,
};

/*
 * pipefs should _never_ be mounted by userland - too much of security hassle,
 * no real gain from having the whole file system mounted. So we don't need
 * any operations on the root directory. However, we need a non-trivial
 * d_name - pipe: will go nicely and kill the special-casing in procfs.
 */

static int pipefs_init_fs_context(struct fs_context *fc)
{
        struct pseudo_fs_context *ctx = init_pseudo(fc, PIPEFS_MAGIC);
        if (!ctx)
                return -ENOMEM;
        ctx->ops = &pipefs_ops;
        ctx->dops = &pipefs_dentry_operations;
        return 0;
}

static struct file_system_type pipe_fs_type = {
        .name           = "pipefs",
        .init_fs_context = pipefs_init_fs_context,
        .kill_sb        = kill_anon_super,
};

#ifdef CONFIG_SYSCTL
static int do_proc_dopipe_max_size_conv(unsigned long *lvalp,
                                        unsigned int *valp,
                                        int write, void *data)
{
        if (write) {
                unsigned int val;

                val = round_pipe_size(*lvalp);
                if (val == 0)
                        return -EINVAL;

                *valp = val;
        } else {
                unsigned int val = *valp;
                *lvalp = (unsigned long) val;
        }

        return 0;
}

static int proc_dopipe_max_size(const struct ctl_table *table, int write,
                                void *buffer, size_t *lenp, loff_t *ppos)
{
        return do_proc_douintvec(table, write, buffer, lenp, ppos,
                                 do_proc_dopipe_max_size_conv, NULL);
}

static struct ctl_table fs_pipe_sysctls[] = {
        {
                .procname       = "pipe-max-size",
                .data           = &pipe_max_size,
                .maxlen         = sizeof(pipe_max_size),
                .mode           = 0644,
                .proc_handler   = proc_dopipe_max_size,
        },
        {
                .procname       = "pipe-user-pages-hard",
                .data           = &pipe_user_pages_hard,
                .maxlen         = sizeof(pipe_user_pages_hard),
                .mode           = 0644,
                .proc_handler   = proc_doulongvec_minmax,
        },
        {
                .procname       = "pipe-user-pages-soft",
                .data           = &pipe_user_pages_soft,
                .maxlen         = sizeof(pipe_user_pages_soft),
                .mode           = 0644,
                .proc_handler   = proc_doulongvec_minmax,
        },
};
#endif

static int __init init_pipe_fs(void)
{
        int err = register_filesystem(&pipe_fs_type);

        if (!err) {
                pipe_mnt = kern_mount(&pipe_fs_type);
                if (IS_ERR(pipe_mnt)) {
                        err = PTR_ERR(pipe_mnt);
                        unregister_filesystem(&pipe_fs_type);
                }
        }
#ifdef CONFIG_SYSCTL
        register_sysctl_init("fs", fs_pipe_sysctls);
#endif
        return err;
}

fs_initcall(init_pipe_fs);