1 // SPDX-License-Identifier: GPL-2.0+
3 * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
6 #ifndef __USB_CORE_EHCI_PDRIVER_H
7 #define __USB_CORE_EHCI_PDRIVER_H
9 struct platform_device
;
13 * struct usb_ehci_pdata - platform_data for generic ehci driver
15 * @caps_offset: offset of the EHCI Capability Registers to the start of
16 * the io memory region provided to the driver.
17 * @has_tt: set to 1 if TT is integrated in root hub.
18 * @port_power_on: set to 1 if the controller needs a power up after
20 * @port_power_off: set to 1 if the controller needs to be powered down
21 * after initialization.
22 * @no_io_watchdog: set to 1 if the controller does not need the I/O
24 * @reset_on_resume: set to 1 if the controller needs to be reset after
25 * a suspend / resume cycle (but can't detect that itself).
27 * These are general configuration options for the EHCI controller. All of
28 * these options are activating more or less workarounds for some hardware.
30 struct usb_ehci_pdata
{
33 unsigned has_synopsys_hc_bug
:1;
34 unsigned big_endian_desc
:1;
35 unsigned big_endian_mmio
:1;
36 unsigned no_io_watchdog
:1;
37 unsigned reset_on_resume
:1;
38 unsigned dma_mask_64
:1;
39 unsigned spurious_oc
:1;
41 /* Turn on all power and clocks */
42 int (*power_on
)(struct platform_device
*pdev
);
43 /* Turn off all power and clocks */
44 void (*power_off
)(struct platform_device
*pdev
);
45 /* Turn on only VBUS suspend power and hotplug detection,
46 * turn off everything else */
47 void (*power_suspend
)(struct platform_device
*pdev
);
48 int (*pre_setup
)(struct usb_hcd
*hcd
);
51 #endif /* __USB_CORE_EHCI_PDRIVER_H */