sound/soc/codecs/rt1308-sdw.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // rt1308-sdw.c -- rt1308 ALSA SoC audio driver
   4 //
   5 // Copyright(c) 2019 Realtek Semiconductor Corp.
   6 //
   7 //
   8 #include <linux/delay.h>
   9 #include <linux/device.h>
  10 #include <linux/pm_runtime.h>
  11 #include <linux/mod_devicetable.h>
  12 #include <linux/soundwire/sdw.h>
  13 #include <linux/soundwire/sdw_type.h>
  14 #include <linux/soundwire/sdw_registers.h>
  15 #include <linux/module.h>
  16 #include <linux/regmap.h>
  17 #include <sound/core.h>
  18 #include <sound/pcm.h>
  19 #include <sound/pcm_params.h>
  20 #include <sound/sdw.h>
  21 #include <sound/soc.h>
  22 #include <sound/soc-dapm.h>
  23 #include <sound/initval.h>
  24
  25 #include "rt1308.h"
  26 #include "rt1308-sdw.h"
  27
  28 static bool rt1308_readable_register(struct device *dev, unsigned int reg)
  29 {
  30         switch (reg) {
  31         case 0x00e0:
  32         case 0x00f0:
  33         case 0x2f01 ... 0x2f07:
  34         case 0x3000 ... 0x3001:
  35         case 0x3004 ... 0x3005:
  36         case 0x3008:
  37         case 0x300a:
  38         case 0xc000 ... 0xcff3:
  39                 return true;
  40         default:
  41                 return false;
  42         }
  43 }
  44
  45 static bool rt1308_volatile_register(struct device *dev, unsigned int reg)
  46 {
  47         switch (reg) {
  48         case 0x2f01 ... 0x2f07:
  49         case 0x3000 ... 0x3001:
  50         case 0x3004 ... 0x3005:
  51         case 0x3008:
  52         case 0x300a:
  53         case 0xc000:
  54         case 0xc710:
  55         case 0xcf01:
  56         case 0xc860 ... 0xc863:
  57         case 0xc870 ... 0xc873:
  58                 return true;
  59         default:
  60                 return false;
  61         }
  62 }
  63
  64 static const struct regmap_config rt1308_sdw_regmap = {
  65         .reg_bits = 32,
  66         .val_bits = 8,
  67         .readable_reg = rt1308_readable_register,
  68         .volatile_reg = rt1308_volatile_register,
  69         .max_register = 0xcfff,
  70         .reg_defaults = rt1308_reg_defaults,
  71         .num_reg_defaults = ARRAY_SIZE(rt1308_reg_defaults),
  72         .cache_type = REGCACHE_MAPLE,
  73         .use_single_read = true,
  74         .use_single_write = true,
  75 };
  76
  77 /* Bus clock frequency */
  78 #define RT1308_CLK_FREQ_9600000HZ 9600000
  79 #define RT1308_CLK_FREQ_12000000HZ 12000000
  80 #define RT1308_CLK_FREQ_6000000HZ 6000000
  81 #define RT1308_CLK_FREQ_4800000HZ 4800000
  82 #define RT1308_CLK_FREQ_2400000HZ 2400000
  83 #define RT1308_CLK_FREQ_12288000HZ 12288000
  84
  85 static int rt1308_clock_config(struct device *dev)
  86 {
  87         struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev);
  88         unsigned int clk_freq, value;
  89
  90         clk_freq = (rt1308->params.curr_dr_freq >> 1);
  91
  92         switch (clk_freq) {
  93         case RT1308_CLK_FREQ_12000000HZ:
  94                 value = 0x0;
  95                 break;
  96         case RT1308_CLK_FREQ_6000000HZ:
  97                 value = 0x1;
  98                 break;
  99         case RT1308_CLK_FREQ_9600000HZ:
 100                 value = 0x2;
 101                 break;
 102         case RT1308_CLK_FREQ_4800000HZ:
 103                 value = 0x3;
 104                 break;
 105         case RT1308_CLK_FREQ_2400000HZ:
 106                 value = 0x4;
 107                 break;
 108         case RT1308_CLK_FREQ_12288000HZ:
 109                 value = 0x5;
 110                 break;
 111         default:
 112                 return -EINVAL;
 113         }
 114
 115         regmap_write(rt1308->regmap, 0xe0, value);
 116         regmap_write(rt1308->regmap, 0xf0, value);
 117
 118         dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq);
 119
 120         return 0;
 121 }
 122
 123 static int rt1308_read_prop(struct sdw_slave *slave)
 124 {
 125         struct sdw_slave_prop *prop = &slave->prop;
 126         int nval, i;
 127         u32 bit;
 128         unsigned long addr;
 129         struct sdw_dpn_prop *dpn;
 130
 131         prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
 132         prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
 133
 134         prop->paging_support = true;
 135
 136         /* first we need to allocate memory for set bits in port lists */
 137         prop->source_ports = 0x00; /* BITMAP: 00010100 (not enable yet) */
 138         prop->sink_ports = 0x2; /* BITMAP:  00000010 */
 139
 140         /* for sink */
 141         nval = hweight32(prop->sink_ports);
 142         prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
 143                                                 sizeof(*prop->sink_dpn_prop),
 144                                                 GFP_KERNEL);
 145         if (!prop->sink_dpn_prop)
 146                 return -ENOMEM;
 147
 148         i = 0;
 149         dpn = prop->sink_dpn_prop;
 150         addr = prop->sink_ports;
 151         for_each_set_bit(bit, &addr, 32) {
 152                 dpn[i].num = bit;
 153                 dpn[i].type = SDW_DPN_FULL;
 154                 dpn[i].simple_ch_prep_sm = true;
 155                 dpn[i].ch_prep_timeout = 10;
 156                 i++;
 157         }
 158
 159         /* set the timeout values */
 160         prop->clk_stop_timeout = 20;
 161
 162         dev_dbg(&slave->dev, "%s\n", __func__);
 163
 164         return 0;
 165 }
 166
 167 static void rt1308_apply_calib_params(struct rt1308_sdw_priv *rt1308)
 168 {
 169         unsigned int efuse_m_btl_l, efuse_m_btl_r, tmp;
 170         unsigned int efuse_c_btl_l, efuse_c_btl_r;
 171
 172         /* read efuse to apply calibration parameters */
 173         regmap_write(rt1308->regmap, 0xc7f0, 0x04);
 174         regmap_write(rt1308->regmap, 0xc7f1, 0xfe);
 175         msleep(100);
 176         regmap_write(rt1308->regmap, 0xc7f0, 0x44);
 177         msleep(20);
 178         regmap_write(rt1308->regmap, 0xc240, 0x10);
 179
 180         regmap_read(rt1308->regmap, 0xc861, &tmp);
 181         efuse_m_btl_l = tmp;
 182         regmap_read(rt1308->regmap, 0xc860, &tmp);
 183         efuse_m_btl_l = efuse_m_btl_l | (tmp << 8);
 184         regmap_read(rt1308->regmap, 0xc863, &tmp);
 185         efuse_c_btl_l = tmp;
 186         regmap_read(rt1308->regmap, 0xc862, &tmp);
 187         efuse_c_btl_l = efuse_c_btl_l | (tmp << 8);
 188         regmap_read(rt1308->regmap, 0xc871, &tmp);
 189         efuse_m_btl_r = tmp;
 190         regmap_read(rt1308->regmap, 0xc870, &tmp);
 191         efuse_m_btl_r = efuse_m_btl_r | (tmp << 8);
 192         regmap_read(rt1308->regmap, 0xc873, &tmp);
 193         efuse_c_btl_r = tmp;
 194         regmap_read(rt1308->regmap, 0xc872, &tmp);
 195         efuse_c_btl_r = efuse_c_btl_r | (tmp << 8);
 196         dev_dbg(&rt1308->sdw_slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__,
 197                 efuse_m_btl_l, efuse_m_btl_r);
 198         dev_dbg(&rt1308->sdw_slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__,
 199                 efuse_c_btl_l, efuse_c_btl_r);
 200 }
 201
 202 static void rt1308_apply_bq_params(struct rt1308_sdw_priv *rt1308)
 203 {
 204         unsigned int i, reg, data;
 205
 206         for (i = 0; i < rt1308->bq_params_cnt; i += 3) {
 207                 reg = rt1308->bq_params[i] | (rt1308->bq_params[i + 1] << 8);
 208                 data = rt1308->bq_params[i + 2];
 209                 regmap_write(rt1308->regmap, reg, data);
 210         }
 211 }
 212
 213 static int rt1308_io_init(struct device *dev, struct sdw_slave *slave)
 214 {
 215         struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev);
 216         int ret = 0;
 217         unsigned int tmp, hibernation_flag;
 218
 219         if (rt1308->hw_init)
 220                 return 0;
 221
 222         regcache_cache_only(rt1308->regmap, false);
 223         if (rt1308->first_hw_init)
 224                 regcache_cache_bypass(rt1308->regmap, true);
 225
 226         /*
 227          * PM runtime status is marked as 'active' only when a Slave reports as Attached
 228          */
 229         if (!rt1308->first_hw_init)
 230                 /* update count of parent 'active' children */
 231                 pm_runtime_set_active(&slave->dev);
 232
 233         pm_runtime_get_noresume(&slave->dev);
 234
 235         regmap_read(rt1308->regmap, 0xcf01, &hibernation_flag);
 236         if ((hibernation_flag != 0x00) && rt1308->first_hw_init)
 237                 goto _preset_ready_;
 238
 239         /* sw reset */
 240         regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0);
 241
 242         regmap_read(rt1308->regmap, 0xc710, &tmp);
 243         rt1308->hw_ver = tmp;
 244         dev_dbg(dev, "%s, hw_ver=0x%x\n", __func__, rt1308->hw_ver);
 245
 246         /* initial settings */
 247         regmap_write(rt1308->regmap, 0xc103, 0xc0);
 248         regmap_write(rt1308->regmap, 0xc030, 0x17);
 249         regmap_write(rt1308->regmap, 0xc031, 0x81);
 250         regmap_write(rt1308->regmap, 0xc032, 0x26);
 251         regmap_write(rt1308->regmap, 0xc040, 0x80);
 252         regmap_write(rt1308->regmap, 0xc041, 0x80);
 253         regmap_write(rt1308->regmap, 0xc042, 0x06);
 254         regmap_write(rt1308->regmap, 0xc052, 0x0a);
 255         regmap_write(rt1308->regmap, 0xc080, 0x0a);
 256         regmap_write(rt1308->regmap, 0xc060, 0x02);
 257         regmap_write(rt1308->regmap, 0xc061, 0x75);
 258         regmap_write(rt1308->regmap, 0xc062, 0x05);
 259         regmap_write(rt1308->regmap, 0xc171, 0x07);
 260         regmap_write(rt1308->regmap, 0xc173, 0x0d);
 261         if (rt1308->hw_ver == RT1308_VER_C) {
 262                 regmap_write(rt1308->regmap, 0xc311, 0x7f);
 263                 regmap_write(rt1308->regmap, 0xc300, 0x09);
 264         } else {
 265                 regmap_write(rt1308->regmap, 0xc311, 0x4f);
 266                 regmap_write(rt1308->regmap, 0xc300, 0x0b);
 267         }
 268         regmap_write(rt1308->regmap, 0xc900, 0x5a);
 269         regmap_write(rt1308->regmap, 0xc1a0, 0x84);
 270         regmap_write(rt1308->regmap, 0xc1a1, 0x01);
 271         regmap_write(rt1308->regmap, 0xc360, 0x78);
 272         regmap_write(rt1308->regmap, 0xc361, 0x87);
 273         regmap_write(rt1308->regmap, 0xc0a1, 0x71);
 274         regmap_write(rt1308->regmap, 0xc210, 0x00);
 275         regmap_write(rt1308->regmap, 0xc070, 0x00);
 276         regmap_write(rt1308->regmap, 0xc100, 0xd7);
 277         regmap_write(rt1308->regmap, 0xc101, 0xd7);
 278
 279         /* apply BQ params */
 280         rt1308_apply_bq_params(rt1308);
 281
 282         regmap_write(rt1308->regmap, 0xcf01, 0x01);
 283
 284 _preset_ready_:
 285         if (rt1308->first_hw_init) {
 286                 regcache_cache_bypass(rt1308->regmap, false);
 287                 regcache_mark_dirty(rt1308->regmap);
 288         } else
 289                 rt1308->first_hw_init = true;
 290
 291         /* Mark Slave initialization complete */
 292         rt1308->hw_init = true;
 293
 294         pm_runtime_mark_last_busy(&slave->dev);
 295         pm_runtime_put_autosuspend(&slave->dev);
 296
 297         dev_dbg(&slave->dev, "%s hw_init complete\n", __func__);
 298
 299         return ret;
 300 }
 301
 302 static int rt1308_update_status(struct sdw_slave *slave,
 303                                         enum sdw_slave_status status)
 304 {
 305         struct  rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev);
 306
 307         if (status == SDW_SLAVE_UNATTACHED)
 308                 rt1308->hw_init = false;
 309
 310         /*
 311          * Perform initialization only if slave status is present and
 312          * hw_init flag is false
 313          */
 314         if (rt1308->hw_init || status != SDW_SLAVE_ATTACHED)
 315                 return 0;
 316
 317         /* perform I/O transfers required for Slave initialization */
 318         return rt1308_io_init(&slave->dev, slave);
 319 }
 320
 321 static int rt1308_bus_config(struct sdw_slave *slave,
 322                                 struct sdw_bus_params *params)
 323 {
 324         struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev);
 325         int ret;
 326
 327         memcpy(&rt1308->params, params, sizeof(*params));
 328
 329         ret = rt1308_clock_config(&slave->dev);
 330         if (ret < 0)
 331                 dev_err(&slave->dev, "Invalid clk config");
 332
 333         return ret;
 334 }
 335
 336 static int rt1308_interrupt_callback(struct sdw_slave *slave,
 337                                         struct sdw_slave_intr_status *status)
 338 {
 339         dev_dbg(&slave->dev,
 340                 "%s control_port_stat=%x", __func__, status->control_port);
 341
 342         return 0;
 343 }
 344
 345 static int rt1308_classd_event(struct snd_soc_dapm_widget *w,
 346         struct snd_kcontrol *kcontrol, int event)
 347 {
 348         struct snd_soc_component *component =
 349                 snd_soc_dapm_to_component(w->dapm);
 350         struct rt1308_sdw_priv *rt1308 =
 351                 snd_soc_component_get_drvdata(component);
 352
 353         switch (event) {
 354         case SND_SOC_DAPM_POST_PMU:
 355                 msleep(30);
 356                 snd_soc_component_update_bits(component,
 357                         RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4),
 358                         0x3,    0x3);
 359                 msleep(40);
 360                 rt1308_apply_calib_params(rt1308);
 361                 break;
 362         case SND_SOC_DAPM_PRE_PMD:
 363                 snd_soc_component_update_bits(component,
 364                         RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4),
 365                         0x3, 0);
 366                 usleep_range(150000, 200000);
 367                 break;
 368
 369         default:
 370                 break;
 371         }
 372
 373         return 0;
 374 }
 375
 376 static const char * const rt1308_rx_data_ch_select[] = {
 377         "LR",
 378         "LL",
 379         "RL",
 380         "RR",
 381 };
 382
 383 static SOC_ENUM_SINGLE_DECL(rt1308_rx_data_ch_enum,
 384         RT1308_SDW_OFFSET | (RT1308_DATA_PATH << 4), 0,
 385         rt1308_rx_data_ch_select);
 386
 387 static const struct snd_kcontrol_new rt1308_snd_controls[] = {
 388
 389         /* I2S Data Channel Selection */
 390         SOC_ENUM("RX Channel Select", rt1308_rx_data_ch_enum),
 391 };
 392
 393 static const struct snd_kcontrol_new rt1308_sto_dac_l =
 394         SOC_DAPM_SINGLE_AUTODISABLE("Switch",
 395                 RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4),
 396                 RT1308_DVOL_MUTE_L_EN_SFT, 1, 1);
 397
 398 static const struct snd_kcontrol_new rt1308_sto_dac_r =
 399         SOC_DAPM_SINGLE_AUTODISABLE("Switch",
 400                 RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4),
 401                 RT1308_DVOL_MUTE_R_EN_SFT, 1, 1);
 402
 403 static const struct snd_soc_dapm_widget rt1308_dapm_widgets[] = {
 404         /* Audio Interface */
 405         SND_SOC_DAPM_AIF_IN("AIF1RX", "DP1 Playback", 0, SND_SOC_NOPM, 0, 0),
 406
 407         /* Supply Widgets */
 408         SND_SOC_DAPM_SUPPLY("MBIAS20U",
 409                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        7, 0, NULL, 0),
 410         SND_SOC_DAPM_SUPPLY("ALDO",
 411                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        6, 0, NULL, 0),
 412         SND_SOC_DAPM_SUPPLY("DBG",
 413                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        5, 0, NULL, 0),
 414         SND_SOC_DAPM_SUPPLY("DACL",
 415                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        4, 0, NULL, 0),
 416         SND_SOC_DAPM_SUPPLY("CLK25M",
 417                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        2, 0, NULL, 0),
 418         SND_SOC_DAPM_SUPPLY("ADC_R",
 419                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        1, 0, NULL, 0),
 420         SND_SOC_DAPM_SUPPLY("ADC_L",
 421                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        0, 0, NULL, 0),
 422         SND_SOC_DAPM_SUPPLY("DAC Power",
 423                 RT1308_SDW_OFFSET | (RT1308_POWER << 4),        3, 0, NULL, 0),
 424
 425         SND_SOC_DAPM_SUPPLY("DLDO",
 426                 RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4),  5, 0, NULL, 0),
 427         SND_SOC_DAPM_SUPPLY("VREF",
 428                 RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4),  4, 0, NULL, 0),
 429         SND_SOC_DAPM_SUPPLY("MIXER_R",
 430                 RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4),  2, 0, NULL, 0),
 431         SND_SOC_DAPM_SUPPLY("MIXER_L",
 432                 RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4),  1, 0, NULL, 0),
 433         SND_SOC_DAPM_SUPPLY("MBIAS4U",
 434                 RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4),  0, 0, NULL, 0),
 435
 436         SND_SOC_DAPM_SUPPLY("PLL2_LDO",
 437                 RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 4, 0, NULL, 0),
 438         SND_SOC_DAPM_SUPPLY("PLL2B",
 439                 RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 3, 0, NULL, 0),
 440         SND_SOC_DAPM_SUPPLY("PLL2F",
 441                 RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 2, 0, NULL, 0),
 442         SND_SOC_DAPM_SUPPLY("PLL2F2",
 443                 RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 1, 0, NULL, 0),
 444         SND_SOC_DAPM_SUPPLY("PLL2B2",
 445                 RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 0, 0, NULL, 0),
 446
 447         /* Digital Interface */
 448         SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
 449         SND_SOC_DAPM_SWITCH("DAC L", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_l),
 450         SND_SOC_DAPM_SWITCH("DAC R", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_r),
 451
 452         /* Output Lines */
 453         SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0,
 454                 rt1308_classd_event,
 455                 SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
 456         SND_SOC_DAPM_OUTPUT("SPOL"),
 457         SND_SOC_DAPM_OUTPUT("SPOR"),
 458 };
 459
 460 static const struct snd_soc_dapm_route rt1308_dapm_routes[] = {
 461
 462         { "DAC", NULL, "AIF1RX" },
 463
 464         { "DAC", NULL, "MBIAS20U" },
 465         { "DAC", NULL, "ALDO" },
 466         { "DAC", NULL, "DBG" },
 467         { "DAC", NULL, "DACL" },
 468         { "DAC", NULL, "CLK25M" },
 469         { "DAC", NULL, "ADC_R" },
 470         { "DAC", NULL, "ADC_L" },
 471         { "DAC", NULL, "DLDO" },
 472         { "DAC", NULL, "VREF" },
 473         { "DAC", NULL, "MIXER_R" },
 474         { "DAC", NULL, "MIXER_L" },
 475         { "DAC", NULL, "MBIAS4U" },
 476         { "DAC", NULL, "PLL2_LDO" },
 477         { "DAC", NULL, "PLL2B" },
 478         { "DAC", NULL, "PLL2F" },
 479         { "DAC", NULL, "PLL2F2" },
 480         { "DAC", NULL, "PLL2B2" },
 481
 482         { "DAC L", "Switch", "DAC" },
 483         { "DAC R", "Switch", "DAC" },
 484         { "DAC L", NULL, "DAC Power" },
 485         { "DAC R", NULL, "DAC Power" },
 486
 487         { "CLASS D", NULL, "DAC L" },
 488         { "CLASS D", NULL, "DAC R" },
 489         { "SPOL", NULL, "CLASS D" },
 490         { "SPOR", NULL, "CLASS D" },
 491 };
 492
 493 static int rt1308_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream,
 494                                 int direction)
 495 {
 496         snd_soc_dai_dma_data_set(dai, direction, sdw_stream);
 497
 498         return 0;
 499 }
 500
 501 static void rt1308_sdw_shutdown(struct snd_pcm_substream *substream,
 502                                 struct snd_soc_dai *dai)
 503 {
 504         snd_soc_dai_set_dma_data(dai, substream, NULL);
 505 }
 506
 507 static int rt1308_sdw_set_tdm_slot(struct snd_soc_dai *dai,
 508                                    unsigned int tx_mask,
 509                                    unsigned int rx_mask,
 510                                    int slots, int slot_width)
 511 {
 512         struct snd_soc_component *component = dai->component;
 513         struct rt1308_sdw_priv *rt1308 =
 514                 snd_soc_component_get_drvdata(component);
 515
 516         if (tx_mask)
 517                 return -EINVAL;
 518
 519         if (slots > 2)
 520                 return -EINVAL;
 521
 522         rt1308->rx_mask = rx_mask;
 523         rt1308->slots = slots;
 524         /* slot_width is not used since it's irrelevant for SoundWire */
 525
 526         return 0;
 527 }
 528
 529 static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 530         struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
 531 {
 532         struct snd_soc_component *component = dai->component;
 533         struct rt1308_sdw_priv *rt1308 =
 534                 snd_soc_component_get_drvdata(component);
 535         struct sdw_stream_config stream_config = {0};
 536         struct sdw_port_config port_config = {0};
 537         struct sdw_stream_runtime *sdw_stream;
 538         int retval;
 539
 540         dev_dbg(dai->dev, "%s %s", __func__, dai->name);
 541         sdw_stream = snd_soc_dai_get_dma_data(dai, substream);
 542
 543         if (!sdw_stream)
 544                 return -EINVAL;
 545
 546         if (!rt1308->sdw_slave)
 547                 return -EINVAL;
 548
 549         /* SoundWire specific configuration */
 550         snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
 551
 552         /* port 1 for playback */
 553         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 554                 port_config.num = 1;
 555         else
 556                 return -EINVAL;
 557
 558         if (rt1308->slots) {
 559                 stream_config.ch_count = rt1308->slots;
 560                 port_config.ch_mask = rt1308->rx_mask;
 561         }
 562
 563         retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config,
 564                                 &port_config, 1, sdw_stream);
 565         if (retval) {
 566                 dev_err(dai->dev, "Unable to configure port\n");
 567                 return retval;
 568         }
 569
 570         return retval;
 571 }
 572
 573 static int rt1308_sdw_pcm_hw_free(struct snd_pcm_substream *substream,
 574                                 struct snd_soc_dai *dai)
 575 {
 576         struct snd_soc_component *component = dai->component;
 577         struct rt1308_sdw_priv *rt1308 =
 578                 snd_soc_component_get_drvdata(component);
 579         struct sdw_stream_runtime *sdw_stream =
 580                 snd_soc_dai_get_dma_data(dai, substream);
 581
 582         if (!rt1308->sdw_slave)
 583                 return -EINVAL;
 584
 585         sdw_stream_remove_slave(rt1308->sdw_slave, sdw_stream);
 586         return 0;
 587 }
 588
 589 /*
 590  * slave_ops: callbacks for get_clock_stop_mode, clock_stop and
 591  * port_prep are not defined for now
 592  */
 593 static const struct sdw_slave_ops rt1308_slave_ops = {
 594         .read_prop = rt1308_read_prop,
 595         .interrupt_callback = rt1308_interrupt_callback,
 596         .update_status = rt1308_update_status,
 597         .bus_config = rt1308_bus_config,
 598 };
 599
 600 static int rt1308_sdw_parse_dt(struct rt1308_sdw_priv *rt1308, struct device *dev)
 601 {
 602         int ret = 0;
 603
 604         device_property_read_u32(dev, "realtek,bq-params-cnt", &rt1308->bq_params_cnt);
 605         if (rt1308->bq_params_cnt) {
 606                 rt1308->bq_params = devm_kzalloc(dev, rt1308->bq_params_cnt, GFP_KERNEL);
 607                 if (!rt1308->bq_params) {
 608                         dev_err(dev, "Could not allocate bq_params memory\n");
 609                         ret = -ENOMEM;
 610                 } else {
 611                         ret = device_property_read_u8_array(dev, "realtek,bq-params", rt1308->bq_params, rt1308->bq_params_cnt);
 612                         if (ret < 0)
 613                                 dev_err(dev, "Could not read list of realtek,bq-params\n");
 614                 }
 615         }
 616
 617         dev_dbg(dev, "bq_params_cnt=%d\n", rt1308->bq_params_cnt);
 618         return ret;
 619 }
 620
 621 static int rt1308_sdw_component_probe(struct snd_soc_component *component)
 622 {
 623         struct rt1308_sdw_priv *rt1308 = snd_soc_component_get_drvdata(component);
 624         int ret;
 625
 626         rt1308->component = component;
 627         rt1308_sdw_parse_dt(rt1308, &rt1308->sdw_slave->dev);
 628
 629         if (!rt1308->first_hw_init)
 630                 return 0;
 631
 632         ret = pm_runtime_resume(component->dev);
 633         if (ret < 0 && ret != -EACCES)
 634                 return ret;
 635
 636         /* apply BQ params */
 637         rt1308_apply_bq_params(rt1308);
 638
 639         return 0;
 640 }
 641
 642 static const struct snd_soc_component_driver soc_component_sdw_rt1308 = {
 643         .probe = rt1308_sdw_component_probe,
 644         .controls = rt1308_snd_controls,
 645         .num_controls = ARRAY_SIZE(rt1308_snd_controls),
 646         .dapm_widgets = rt1308_dapm_widgets,
 647         .num_dapm_widgets = ARRAY_SIZE(rt1308_dapm_widgets),
 648         .dapm_routes = rt1308_dapm_routes,
 649         .num_dapm_routes = ARRAY_SIZE(rt1308_dapm_routes),
 650         .endianness = 1,
 651 };
 652
 653 static const struct snd_soc_dai_ops rt1308_aif_dai_ops = {
 654         .hw_params = rt1308_sdw_hw_params,
 655         .hw_free        = rt1308_sdw_pcm_hw_free,
 656         .set_stream     = rt1308_set_sdw_stream,
 657         .shutdown       = rt1308_sdw_shutdown,
 658         .set_tdm_slot   = rt1308_sdw_set_tdm_slot,
 659 };
 660
 661 #define RT1308_STEREO_RATES SNDRV_PCM_RATE_48000
 662 #define RT1308_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
 663                         SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE | \
 664                         SNDRV_PCM_FMTBIT_S24_LE)
 665
 666 static struct snd_soc_dai_driver rt1308_sdw_dai[] = {
 667         {
 668                 .name = "rt1308-aif",
 669                 .playback = {
 670                         .stream_name = "DP1 Playback",
 671                         .channels_min = 1,
 672                         .channels_max = 2,
 673                         .rates = RT1308_STEREO_RATES,
 674                         .formats = RT1308_FORMATS,
 675                 },
 676                 .ops = &rt1308_aif_dai_ops,
 677         },
 678 };
 679
 680 static int rt1308_sdw_init(struct device *dev, struct regmap *regmap,
 681                                 struct sdw_slave *slave)
 682 {
 683         struct rt1308_sdw_priv *rt1308;
 684         int ret;
 685
 686         rt1308 = devm_kzalloc(dev, sizeof(*rt1308), GFP_KERNEL);
 687         if (!rt1308)
 688                 return -ENOMEM;
 689
 690         dev_set_drvdata(dev, rt1308);
 691         rt1308->sdw_slave = slave;
 692         rt1308->regmap = regmap;
 693
 694         regcache_cache_only(rt1308->regmap, true);
 695
 696         /*
 697          * Mark hw_init to false
 698          * HW init will be performed when device reports present
 699          */
 700         rt1308->hw_init = false;
 701         rt1308->first_hw_init = false;
 702
 703         ret =  devm_snd_soc_register_component(dev,
 704                                 &soc_component_sdw_rt1308,
 705                                 rt1308_sdw_dai,
 706                                 ARRAY_SIZE(rt1308_sdw_dai));
 707         if (ret < 0)
 708                 return ret;
 709
 710         /* set autosuspend parameters */
 711         pm_runtime_set_autosuspend_delay(dev, 3000);
 712         pm_runtime_use_autosuspend(dev);
 713
 714         /* make sure the device does not suspend immediately */
 715         pm_runtime_mark_last_busy(dev);
 716
 717         pm_runtime_enable(dev);
 718
 719         /* important note: the device is NOT tagged as 'active' and will remain
 720          * 'suspended' until the hardware is enumerated/initialized. This is required
 721          * to make sure the ASoC framework use of pm_runtime_get_sync() does not silently
 722          * fail with -EACCESS because of race conditions between card creation and enumeration
 723          */
 724
 725         dev_dbg(dev, "%s\n", __func__);
 726
 727         return 0;
 728 }
 729
 730 static int rt1308_sdw_probe(struct sdw_slave *slave,
 731                                 const struct sdw_device_id *id)
 732 {
 733         struct regmap *regmap;
 734
 735         /* Regmap Initialization */
 736         regmap = devm_regmap_init_sdw(slave, &rt1308_sdw_regmap);
 737         if (IS_ERR(regmap))
 738                 return PTR_ERR(regmap);
 739
 740         return rt1308_sdw_init(&slave->dev, regmap, slave);
 741 }
 742
 743 static int rt1308_sdw_remove(struct sdw_slave *slave)
 744 {
 745         pm_runtime_disable(&slave->dev);
 746
 747         return 0;
 748 }
 749
 750 static const struct sdw_device_id rt1308_id[] = {
 751         SDW_SLAVE_ENTRY_EXT(0x025d, 0x1308, 0x2, 0, 0),
 752         {},
 753 };
 754 MODULE_DEVICE_TABLE(sdw, rt1308_id);
 755
 756 static int __maybe_unused rt1308_dev_suspend(struct device *dev)
 757 {
 758         struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev);
 759
 760         if (!rt1308->hw_init)
 761                 return 0;
 762
 763         regcache_cache_only(rt1308->regmap, true);
 764
 765         return 0;
 766 }
 767
 768 #define RT1308_PROBE_TIMEOUT 5000
 769
 770 static int __maybe_unused rt1308_dev_resume(struct device *dev)
 771 {
 772         struct sdw_slave *slave = dev_to_sdw_dev(dev);
 773         struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev);
 774         unsigned long time;
 775
 776         if (!rt1308->first_hw_init)
 777                 return 0;
 778
 779         if (!slave->unattach_request)
 780                 goto regmap_sync;
 781
 782         time = wait_for_completion_timeout(&slave->initialization_complete,
 783                                 msecs_to_jiffies(RT1308_PROBE_TIMEOUT));
 784         if (!time) {
 785                 dev_err(&slave->dev, "Initialization not complete, timed out\n");
 786                 sdw_show_ping_status(slave->bus, true);
 787
 788                 return -ETIMEDOUT;
 789         }
 790
 791 regmap_sync:
 792         slave->unattach_request = 0;
 793         regcache_cache_only(rt1308->regmap, false);
 794         regcache_sync_region(rt1308->regmap, 0xc000, 0xcfff);
 795
 796         return 0;
 797 }
 798
 799 static const struct dev_pm_ops rt1308_pm = {
 800         SET_SYSTEM_SLEEP_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume)
 801         SET_RUNTIME_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume, NULL)
 802 };
 803
 804 static struct sdw_driver rt1308_sdw_driver = {
 805         .driver = {
 806                 .name = "rt1308",
 807                 .pm = &rt1308_pm,
 808         },
 809         .probe = rt1308_sdw_probe,
 810         .remove = rt1308_sdw_remove,
 811         .ops = &rt1308_slave_ops,
 812         .id_table = rt1308_id,
 813 };
 814 module_sdw_driver(rt1308_sdw_driver);
 815
 816 MODULE_DESCRIPTION("ASoC RT1308 driver SDW");
 817 MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>");
 818 MODULE_LICENSE("GPL v2");