drm/panthor: Don't add write fences to the shared BOs
[drm/drm-misc.git] / drivers / perf / arm_spe_pmu.c
blob3569050f9cf375fecf14053b9a983e75f31bbabc
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Perf support for the Statistical Profiling Extension, introduced as
4 * part of ARMv8.2.
6 * Copyright (C) 2016 ARM Limited
8 * Author: Will Deacon <will.deacon@arm.com>
9 */
11 #define PMUNAME "arm_spe"
12 #define DRVNAME PMUNAME "_pmu"
13 #define pr_fmt(fmt) DRVNAME ": " fmt
15 #include <linux/bitfield.h>
16 #include <linux/bitops.h>
17 #include <linux/bug.h>
18 #include <linux/capability.h>
19 #include <linux/cpuhotplug.h>
20 #include <linux/cpumask.h>
21 #include <linux/device.h>
22 #include <linux/errno.h>
23 #include <linux/interrupt.h>
24 #include <linux/irq.h>
25 #include <linux/kernel.h>
26 #include <linux/list.h>
27 #include <linux/module.h>
28 #include <linux/of.h>
29 #include <linux/perf_event.h>
30 #include <linux/perf/arm_pmu.h>
31 #include <linux/platform_device.h>
32 #include <linux/printk.h>
33 #include <linux/slab.h>
34 #include <linux/smp.h>
35 #include <linux/vmalloc.h>
37 #include <asm/barrier.h>
38 #include <asm/cpufeature.h>
39 #include <asm/mmu.h>
40 #include <asm/sysreg.h>
43 * Cache if the event is allowed to trace Context information.
44 * This allows us to perform the check, i.e, perf_allow_kernel(),
45 * in the context of the event owner, once, during the event_init().
47 #define SPE_PMU_HW_FLAGS_CX 0x00001
49 static_assert((PERF_EVENT_FLAG_ARCH & SPE_PMU_HW_FLAGS_CX) == SPE_PMU_HW_FLAGS_CX);
51 static void set_spe_event_has_cx(struct perf_event *event)
53 if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && !perf_allow_kernel(&event->attr))
54 event->hw.flags |= SPE_PMU_HW_FLAGS_CX;
57 static bool get_spe_event_has_cx(struct perf_event *event)
59 return !!(event->hw.flags & SPE_PMU_HW_FLAGS_CX);
62 #define ARM_SPE_BUF_PAD_BYTE 0
64 struct arm_spe_pmu_buf {
65 int nr_pages;
66 bool snapshot;
67 void *base;
70 struct arm_spe_pmu {
71 struct pmu pmu;
72 struct platform_device *pdev;
73 cpumask_t supported_cpus;
74 struct hlist_node hotplug_node;
76 int irq; /* PPI */
77 u16 pmsver;
78 u16 min_period;
79 u16 counter_sz;
81 #define SPE_PMU_FEAT_FILT_EVT (1UL << 0)
82 #define SPE_PMU_FEAT_FILT_TYP (1UL << 1)
83 #define SPE_PMU_FEAT_FILT_LAT (1UL << 2)
84 #define SPE_PMU_FEAT_ARCH_INST (1UL << 3)
85 #define SPE_PMU_FEAT_LDS (1UL << 4)
86 #define SPE_PMU_FEAT_ERND (1UL << 5)
87 #define SPE_PMU_FEAT_INV_FILT_EVT (1UL << 6)
88 #define SPE_PMU_FEAT_DEV_PROBED (1UL << 63)
89 u64 features;
91 u16 max_record_sz;
92 u16 align;
93 struct perf_output_handle __percpu *handle;
96 #define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
98 /* Convert a free-running index from perf into an SPE buffer offset */
99 #define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT))
101 /* Keep track of our dynamic hotplug state */
102 static enum cpuhp_state arm_spe_pmu_online;
104 enum arm_spe_pmu_buf_fault_action {
105 SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
106 SPE_PMU_BUF_FAULT_ACT_FATAL,
107 SPE_PMU_BUF_FAULT_ACT_OK,
110 /* This sysfs gunk was really good fun to write. */
111 enum arm_spe_pmu_capabilities {
112 SPE_PMU_CAP_ARCH_INST = 0,
113 SPE_PMU_CAP_ERND,
114 SPE_PMU_CAP_FEAT_MAX,
115 SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX,
116 SPE_PMU_CAP_MIN_IVAL,
119 static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = {
120 [SPE_PMU_CAP_ARCH_INST] = SPE_PMU_FEAT_ARCH_INST,
121 [SPE_PMU_CAP_ERND] = SPE_PMU_FEAT_ERND,
124 static u32 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap)
126 if (cap < SPE_PMU_CAP_FEAT_MAX)
127 return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]);
129 switch (cap) {
130 case SPE_PMU_CAP_CNT_SZ:
131 return spe_pmu->counter_sz;
132 case SPE_PMU_CAP_MIN_IVAL:
133 return spe_pmu->min_period;
134 default:
135 WARN(1, "unknown cap %d\n", cap);
138 return 0;
141 static ssize_t arm_spe_pmu_cap_show(struct device *dev,
142 struct device_attribute *attr,
143 char *buf)
145 struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
146 struct dev_ext_attribute *ea =
147 container_of(attr, struct dev_ext_attribute, attr);
148 int cap = (long)ea->var;
150 return sysfs_emit(buf, "%u\n", arm_spe_pmu_cap_get(spe_pmu, cap));
153 #define SPE_EXT_ATTR_ENTRY(_name, _func, _var) \
154 &((struct dev_ext_attribute[]) { \
155 { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var } \
156 })[0].attr.attr
158 #define SPE_CAP_EXT_ATTR_ENTRY(_name, _var) \
159 SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var)
161 static struct attribute *arm_spe_pmu_cap_attr[] = {
162 SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST),
163 SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND),
164 SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ),
165 SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL),
166 NULL,
169 static const struct attribute_group arm_spe_pmu_cap_group = {
170 .name = "caps",
171 .attrs = arm_spe_pmu_cap_attr,
174 /* User ABI */
175 #define ATTR_CFG_FLD_ts_enable_CFG config /* PMSCR_EL1.TS */
176 #define ATTR_CFG_FLD_ts_enable_LO 0
177 #define ATTR_CFG_FLD_ts_enable_HI 0
178 #define ATTR_CFG_FLD_pa_enable_CFG config /* PMSCR_EL1.PA */
179 #define ATTR_CFG_FLD_pa_enable_LO 1
180 #define ATTR_CFG_FLD_pa_enable_HI 1
181 #define ATTR_CFG_FLD_pct_enable_CFG config /* PMSCR_EL1.PCT */
182 #define ATTR_CFG_FLD_pct_enable_LO 2
183 #define ATTR_CFG_FLD_pct_enable_HI 2
184 #define ATTR_CFG_FLD_jitter_CFG config /* PMSIRR_EL1.RND */
185 #define ATTR_CFG_FLD_jitter_LO 16
186 #define ATTR_CFG_FLD_jitter_HI 16
187 #define ATTR_CFG_FLD_branch_filter_CFG config /* PMSFCR_EL1.B */
188 #define ATTR_CFG_FLD_branch_filter_LO 32
189 #define ATTR_CFG_FLD_branch_filter_HI 32
190 #define ATTR_CFG_FLD_load_filter_CFG config /* PMSFCR_EL1.LD */
191 #define ATTR_CFG_FLD_load_filter_LO 33
192 #define ATTR_CFG_FLD_load_filter_HI 33
193 #define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */
194 #define ATTR_CFG_FLD_store_filter_LO 34
195 #define ATTR_CFG_FLD_store_filter_HI 34
197 #define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */
198 #define ATTR_CFG_FLD_event_filter_LO 0
199 #define ATTR_CFG_FLD_event_filter_HI 63
201 #define ATTR_CFG_FLD_min_latency_CFG config2 /* PMSLATFR_EL1.MINLAT */
202 #define ATTR_CFG_FLD_min_latency_LO 0
203 #define ATTR_CFG_FLD_min_latency_HI 11
205 #define ATTR_CFG_FLD_inv_event_filter_CFG config3 /* PMSNEVFR_EL1 */
206 #define ATTR_CFG_FLD_inv_event_filter_LO 0
207 #define ATTR_CFG_FLD_inv_event_filter_HI 63
209 GEN_PMU_FORMAT_ATTR(ts_enable);
210 GEN_PMU_FORMAT_ATTR(pa_enable);
211 GEN_PMU_FORMAT_ATTR(pct_enable);
212 GEN_PMU_FORMAT_ATTR(jitter);
213 GEN_PMU_FORMAT_ATTR(branch_filter);
214 GEN_PMU_FORMAT_ATTR(load_filter);
215 GEN_PMU_FORMAT_ATTR(store_filter);
216 GEN_PMU_FORMAT_ATTR(event_filter);
217 GEN_PMU_FORMAT_ATTR(inv_event_filter);
218 GEN_PMU_FORMAT_ATTR(min_latency);
220 static struct attribute *arm_spe_pmu_formats_attr[] = {
221 &format_attr_ts_enable.attr,
222 &format_attr_pa_enable.attr,
223 &format_attr_pct_enable.attr,
224 &format_attr_jitter.attr,
225 &format_attr_branch_filter.attr,
226 &format_attr_load_filter.attr,
227 &format_attr_store_filter.attr,
228 &format_attr_event_filter.attr,
229 &format_attr_inv_event_filter.attr,
230 &format_attr_min_latency.attr,
231 NULL,
234 static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj,
235 struct attribute *attr,
236 int unused)
238 struct device *dev = kobj_to_dev(kobj);
239 struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
241 if (attr == &format_attr_inv_event_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
242 return 0;
244 return attr->mode;
247 static const struct attribute_group arm_spe_pmu_format_group = {
248 .name = "format",
249 .is_visible = arm_spe_pmu_format_attr_is_visible,
250 .attrs = arm_spe_pmu_formats_attr,
253 static ssize_t cpumask_show(struct device *dev,
254 struct device_attribute *attr, char *buf)
256 struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev);
258 return cpumap_print_to_pagebuf(true, buf, &spe_pmu->supported_cpus);
260 static DEVICE_ATTR_RO(cpumask);
262 static struct attribute *arm_spe_pmu_attrs[] = {
263 &dev_attr_cpumask.attr,
264 NULL,
267 static const struct attribute_group arm_spe_pmu_group = {
268 .attrs = arm_spe_pmu_attrs,
271 static const struct attribute_group *arm_spe_pmu_attr_groups[] = {
272 &arm_spe_pmu_group,
273 &arm_spe_pmu_cap_group,
274 &arm_spe_pmu_format_group,
275 NULL,
278 /* Convert between user ABI and register values */
279 static u64 arm_spe_event_to_pmscr(struct perf_event *event)
281 struct perf_event_attr *attr = &event->attr;
282 u64 reg = 0;
284 reg |= FIELD_PREP(PMSCR_EL1_TS, ATTR_CFG_GET_FLD(attr, ts_enable));
285 reg |= FIELD_PREP(PMSCR_EL1_PA, ATTR_CFG_GET_FLD(attr, pa_enable));
286 reg |= FIELD_PREP(PMSCR_EL1_PCT, ATTR_CFG_GET_FLD(attr, pct_enable));
288 if (!attr->exclude_user)
289 reg |= PMSCR_EL1_E0SPE;
291 if (!attr->exclude_kernel)
292 reg |= PMSCR_EL1_E1SPE;
294 if (get_spe_event_has_cx(event))
295 reg |= PMSCR_EL1_CX;
297 return reg;
300 static void arm_spe_event_sanitise_period(struct perf_event *event)
302 struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
303 u64 period = event->hw.sample_period;
304 u64 max_period = PMSIRR_EL1_INTERVAL_MASK;
306 if (period < spe_pmu->min_period)
307 period = spe_pmu->min_period;
308 else if (period > max_period)
309 period = max_period;
310 else
311 period &= max_period;
313 event->hw.sample_period = period;
316 static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
318 struct perf_event_attr *attr = &event->attr;
319 u64 reg = 0;
321 arm_spe_event_sanitise_period(event);
323 reg |= FIELD_PREP(PMSIRR_EL1_RND, ATTR_CFG_GET_FLD(attr, jitter));
324 reg |= event->hw.sample_period;
326 return reg;
329 static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
331 struct perf_event_attr *attr = &event->attr;
332 u64 reg = 0;
334 reg |= FIELD_PREP(PMSFCR_EL1_LD, ATTR_CFG_GET_FLD(attr, load_filter));
335 reg |= FIELD_PREP(PMSFCR_EL1_ST, ATTR_CFG_GET_FLD(attr, store_filter));
336 reg |= FIELD_PREP(PMSFCR_EL1_B, ATTR_CFG_GET_FLD(attr, branch_filter));
338 if (reg)
339 reg |= PMSFCR_EL1_FT;
341 if (ATTR_CFG_GET_FLD(attr, event_filter))
342 reg |= PMSFCR_EL1_FE;
344 if (ATTR_CFG_GET_FLD(attr, inv_event_filter))
345 reg |= PMSFCR_EL1_FnE;
347 if (ATTR_CFG_GET_FLD(attr, min_latency))
348 reg |= PMSFCR_EL1_FL;
350 return reg;
353 static u64 arm_spe_event_to_pmsevfr(struct perf_event *event)
355 struct perf_event_attr *attr = &event->attr;
356 return ATTR_CFG_GET_FLD(attr, event_filter);
359 static u64 arm_spe_event_to_pmsnevfr(struct perf_event *event)
361 struct perf_event_attr *attr = &event->attr;
362 return ATTR_CFG_GET_FLD(attr, inv_event_filter);
365 static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
367 struct perf_event_attr *attr = &event->attr;
368 return FIELD_PREP(PMSLATFR_EL1_MINLAT, ATTR_CFG_GET_FLD(attr, min_latency));
371 static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
373 struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
374 u64 head = PERF_IDX2OFF(handle->head, buf);
376 memset(buf->base + head, ARM_SPE_BUF_PAD_BYTE, len);
377 if (!buf->snapshot)
378 perf_aux_output_skip(handle, len);
381 static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle)
383 struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
384 struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
385 u64 head = PERF_IDX2OFF(handle->head, buf);
386 u64 limit = buf->nr_pages * PAGE_SIZE;
389 * The trace format isn't parseable in reverse, so clamp
390 * the limit to half of the buffer size in snapshot mode
391 * so that the worst case is half a buffer of records, as
392 * opposed to a single record.
394 if (head < limit >> 1)
395 limit >>= 1;
398 * If we're within max_record_sz of the limit, we must
399 * pad, move the head index and recompute the limit.
401 if (limit - head < spe_pmu->max_record_sz) {
402 arm_spe_pmu_pad_buf(handle, limit - head);
403 handle->head = PERF_IDX2OFF(limit, buf);
404 limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head;
407 return limit;
410 static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle)
412 struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
413 struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
414 const u64 bufsize = buf->nr_pages * PAGE_SIZE;
415 u64 limit = bufsize;
416 u64 head, tail, wakeup;
419 * The head can be misaligned for two reasons:
421 * 1. The hardware left PMBPTR pointing to the first byte after
422 * a record when generating a buffer management event.
424 * 2. We used perf_aux_output_skip to consume handle->size bytes
425 * and CIRC_SPACE was used to compute the size, which always
426 * leaves one entry free.
428 * Deal with this by padding to the next alignment boundary and
429 * moving the head index. If we run out of buffer space, we'll
430 * reduce handle->size to zero and end up reporting truncation.
432 head = PERF_IDX2OFF(handle->head, buf);
433 if (!IS_ALIGNED(head, spe_pmu->align)) {
434 unsigned long delta = roundup(head, spe_pmu->align) - head;
436 delta = min(delta, handle->size);
437 arm_spe_pmu_pad_buf(handle, delta);
438 head = PERF_IDX2OFF(handle->head, buf);
441 /* If we've run out of free space, then nothing more to do */
442 if (!handle->size)
443 goto no_space;
445 /* Compute the tail and wakeup indices now that we've aligned head */
446 tail = PERF_IDX2OFF(handle->head + handle->size, buf);
447 wakeup = PERF_IDX2OFF(handle->wakeup, buf);
450 * Avoid clobbering unconsumed data. We know we have space, so
451 * if we see head == tail we know that the buffer is empty. If
452 * head > tail, then there's nothing to clobber prior to
453 * wrapping.
455 if (head < tail)
456 limit = round_down(tail, PAGE_SIZE);
459 * Wakeup may be arbitrarily far into the future. If it's not in
460 * the current generation, either we'll wrap before hitting it,
461 * or it's in the past and has been handled already.
463 * If there's a wakeup before we wrap, arrange to be woken up by
464 * the page boundary following it. Keep the tail boundary if
465 * that's lower.
467 if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
468 limit = min(limit, round_up(wakeup, PAGE_SIZE));
470 if (limit > head)
471 return limit;
473 arm_spe_pmu_pad_buf(handle, handle->size);
474 no_space:
475 perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
476 perf_aux_output_end(handle, 0);
477 return 0;
480 static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle)
482 struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
483 struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
484 u64 limit = __arm_spe_pmu_next_off(handle);
485 u64 head = PERF_IDX2OFF(handle->head, buf);
488 * If the head has come too close to the end of the buffer,
489 * then pad to the end and recompute the limit.
491 if (limit && (limit - head < spe_pmu->max_record_sz)) {
492 arm_spe_pmu_pad_buf(handle, limit - head);
493 limit = __arm_spe_pmu_next_off(handle);
496 return limit;
499 static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
500 struct perf_event *event)
502 u64 base, limit;
503 struct arm_spe_pmu_buf *buf;
505 /* Start a new aux session */
506 buf = perf_aux_output_begin(handle, event);
507 if (!buf) {
508 event->hw.state |= PERF_HES_STOPPED;
510 * We still need to clear the limit pointer, since the
511 * profiler might only be disabled by virtue of a fault.
513 limit = 0;
514 goto out_write_limit;
517 limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
518 : arm_spe_pmu_next_off(handle);
519 if (limit)
520 limit |= PMBLIMITR_EL1_E;
522 limit += (u64)buf->base;
523 base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
524 write_sysreg_s(base, SYS_PMBPTR_EL1);
526 out_write_limit:
527 write_sysreg_s(limit, SYS_PMBLIMITR_EL1);
530 static void arm_spe_perf_aux_output_end(struct perf_output_handle *handle)
532 struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
533 u64 offset, size;
535 offset = read_sysreg_s(SYS_PMBPTR_EL1) - (u64)buf->base;
536 size = offset - PERF_IDX2OFF(handle->head, buf);
538 if (buf->snapshot)
539 handle->head = offset;
541 perf_aux_output_end(handle, size);
544 static void arm_spe_pmu_disable_and_drain_local(void)
546 /* Disable profiling at EL0 and EL1 */
547 write_sysreg_s(0, SYS_PMSCR_EL1);
548 isb();
550 /* Drain any buffered data */
551 psb_csync();
552 dsb(nsh);
554 /* Disable the profiling buffer */
555 write_sysreg_s(0, SYS_PMBLIMITR_EL1);
556 isb();
559 /* IRQ handling */
560 static enum arm_spe_pmu_buf_fault_action
561 arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
563 const char *err_str;
564 u64 pmbsr;
565 enum arm_spe_pmu_buf_fault_action ret;
568 * Ensure new profiling data is visible to the CPU and any external
569 * aborts have been resolved.
571 psb_csync();
572 dsb(nsh);
574 /* Ensure hardware updates to PMBPTR_EL1 are visible */
575 isb();
577 /* Service required? */
578 pmbsr = read_sysreg_s(SYS_PMBSR_EL1);
579 if (!FIELD_GET(PMBSR_EL1_S, pmbsr))
580 return SPE_PMU_BUF_FAULT_ACT_SPURIOUS;
583 * If we've lost data, disable profiling and also set the PARTIAL
584 * flag to indicate that the last record is corrupted.
586 if (FIELD_GET(PMBSR_EL1_DL, pmbsr))
587 perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED |
588 PERF_AUX_FLAG_PARTIAL);
590 /* Report collisions to userspace so that it can up the period */
591 if (FIELD_GET(PMBSR_EL1_COLL, pmbsr))
592 perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
594 /* We only expect buffer management events */
595 switch (FIELD_GET(PMBSR_EL1_EC, pmbsr)) {
596 case PMBSR_EL1_EC_BUF:
597 /* Handled below */
598 break;
599 case PMBSR_EL1_EC_FAULT_S1:
600 case PMBSR_EL1_EC_FAULT_S2:
601 err_str = "Unexpected buffer fault";
602 goto out_err;
603 default:
604 err_str = "Unknown error code";
605 goto out_err;
608 /* Buffer management event */
609 switch (FIELD_GET(PMBSR_EL1_BUF_BSC_MASK, pmbsr)) {
610 case PMBSR_EL1_BUF_BSC_FULL:
611 ret = SPE_PMU_BUF_FAULT_ACT_OK;
612 goto out_stop;
613 default:
614 err_str = "Unknown buffer status code";
617 out_err:
618 pr_err_ratelimited("%s on CPU %d [PMBSR=0x%016llx, PMBPTR=0x%016llx, PMBLIMITR=0x%016llx]\n",
619 err_str, smp_processor_id(), pmbsr,
620 read_sysreg_s(SYS_PMBPTR_EL1),
621 read_sysreg_s(SYS_PMBLIMITR_EL1));
622 ret = SPE_PMU_BUF_FAULT_ACT_FATAL;
624 out_stop:
625 arm_spe_perf_aux_output_end(handle);
626 return ret;
629 static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev)
631 struct perf_output_handle *handle = dev;
632 struct perf_event *event = handle->event;
633 enum arm_spe_pmu_buf_fault_action act;
635 if (!perf_get_aux(handle))
636 return IRQ_NONE;
638 act = arm_spe_pmu_buf_get_fault_act(handle);
639 if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
640 return IRQ_NONE;
643 * Ensure perf callbacks have completed, which may disable the
644 * profiling buffer in response to a TRUNCATION flag.
646 irq_work_run();
648 switch (act) {
649 case SPE_PMU_BUF_FAULT_ACT_FATAL:
651 * If a fatal exception occurred then leaving the profiling
652 * buffer enabled is a recipe waiting to happen. Since
653 * fatal faults don't always imply truncation, make sure
654 * that the profiling buffer is disabled explicitly before
655 * clearing the syndrome register.
657 arm_spe_pmu_disable_and_drain_local();
658 break;
659 case SPE_PMU_BUF_FAULT_ACT_OK:
661 * We handled the fault (the buffer was full), so resume
662 * profiling as long as we didn't detect truncation.
663 * PMBPTR might be misaligned, but we'll burn that bridge
664 * when we get to it.
666 if (!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)) {
667 arm_spe_perf_aux_output_begin(handle, event);
668 isb();
670 break;
671 case SPE_PMU_BUF_FAULT_ACT_SPURIOUS:
672 /* We've seen you before, but GCC has the memory of a sieve. */
673 break;
676 /* The buffer pointers are now sane, so resume profiling. */
677 write_sysreg_s(0, SYS_PMBSR_EL1);
678 return IRQ_HANDLED;
681 static u64 arm_spe_pmsevfr_res0(u16 pmsver)
683 switch (pmsver) {
684 case ID_AA64DFR0_EL1_PMSVer_IMP:
685 return PMSEVFR_EL1_RES0_IMP;
686 case ID_AA64DFR0_EL1_PMSVer_V1P1:
687 return PMSEVFR_EL1_RES0_V1P1;
688 case ID_AA64DFR0_EL1_PMSVer_V1P2:
689 /* Return the highest version we support in default */
690 default:
691 return PMSEVFR_EL1_RES0_V1P2;
695 /* Perf callbacks */
696 static int arm_spe_pmu_event_init(struct perf_event *event)
698 u64 reg;
699 struct perf_event_attr *attr = &event->attr;
700 struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
702 /* This is, of course, deeply driver-specific */
703 if (attr->type != event->pmu->type)
704 return -ENOENT;
706 if (event->cpu >= 0 &&
707 !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
708 return -ENOENT;
710 if (arm_spe_event_to_pmsevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
711 return -EOPNOTSUPP;
713 if (arm_spe_event_to_pmsnevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
714 return -EOPNOTSUPP;
716 if (attr->exclude_idle)
717 return -EOPNOTSUPP;
720 * Feedback-directed frequency throttling doesn't work when we
721 * have a buffer of samples. We'd need to manually count the
722 * samples in the buffer when it fills up and adjust the event
723 * count to reflect that. Instead, just force the user to specify
724 * a sample period.
726 if (attr->freq)
727 return -EINVAL;
729 reg = arm_spe_event_to_pmsfcr(event);
730 if ((FIELD_GET(PMSFCR_EL1_FE, reg)) &&
731 !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
732 return -EOPNOTSUPP;
734 if ((FIELD_GET(PMSFCR_EL1_FnE, reg)) &&
735 !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
736 return -EOPNOTSUPP;
738 if ((FIELD_GET(PMSFCR_EL1_FT, reg)) &&
739 !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
740 return -EOPNOTSUPP;
742 if ((FIELD_GET(PMSFCR_EL1_FL, reg)) &&
743 !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
744 return -EOPNOTSUPP;
746 set_spe_event_has_cx(event);
747 reg = arm_spe_event_to_pmscr(event);
748 if (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT))
749 return perf_allow_kernel(&event->attr);
751 return 0;
754 static void arm_spe_pmu_start(struct perf_event *event, int flags)
756 u64 reg;
757 struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
758 struct hw_perf_event *hwc = &event->hw;
759 struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
761 hwc->state = 0;
762 arm_spe_perf_aux_output_begin(handle, event);
763 if (hwc->state)
764 return;
766 reg = arm_spe_event_to_pmsfcr(event);
767 write_sysreg_s(reg, SYS_PMSFCR_EL1);
769 reg = arm_spe_event_to_pmsevfr(event);
770 write_sysreg_s(reg, SYS_PMSEVFR_EL1);
772 if (spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT) {
773 reg = arm_spe_event_to_pmsnevfr(event);
774 write_sysreg_s(reg, SYS_PMSNEVFR_EL1);
777 reg = arm_spe_event_to_pmslatfr(event);
778 write_sysreg_s(reg, SYS_PMSLATFR_EL1);
780 if (flags & PERF_EF_RELOAD) {
781 reg = arm_spe_event_to_pmsirr(event);
782 write_sysreg_s(reg, SYS_PMSIRR_EL1);
783 isb();
784 reg = local64_read(&hwc->period_left);
785 write_sysreg_s(reg, SYS_PMSICR_EL1);
788 reg = arm_spe_event_to_pmscr(event);
789 isb();
790 write_sysreg_s(reg, SYS_PMSCR_EL1);
793 static void arm_spe_pmu_stop(struct perf_event *event, int flags)
795 struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
796 struct hw_perf_event *hwc = &event->hw;
797 struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
799 /* If we're already stopped, then nothing to do */
800 if (hwc->state & PERF_HES_STOPPED)
801 return;
803 /* Stop all trace generation */
804 arm_spe_pmu_disable_and_drain_local();
806 if (flags & PERF_EF_UPDATE) {
808 * If there's a fault pending then ensure we contain it
809 * to this buffer, since we might be on the context-switch
810 * path.
812 if (perf_get_aux(handle)) {
813 enum arm_spe_pmu_buf_fault_action act;
815 act = arm_spe_pmu_buf_get_fault_act(handle);
816 if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
817 arm_spe_perf_aux_output_end(handle);
818 else
819 write_sysreg_s(0, SYS_PMBSR_EL1);
823 * This may also contain ECOUNT, but nobody else should
824 * be looking at period_left, since we forbid frequency
825 * based sampling.
827 local64_set(&hwc->period_left, read_sysreg_s(SYS_PMSICR_EL1));
828 hwc->state |= PERF_HES_UPTODATE;
831 hwc->state |= PERF_HES_STOPPED;
834 static int arm_spe_pmu_add(struct perf_event *event, int flags)
836 int ret = 0;
837 struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
838 struct hw_perf_event *hwc = &event->hw;
839 int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu;
841 if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
842 return -ENOENT;
844 hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
846 if (flags & PERF_EF_START) {
847 arm_spe_pmu_start(event, PERF_EF_RELOAD);
848 if (hwc->state & PERF_HES_STOPPED)
849 ret = -EINVAL;
852 return ret;
855 static void arm_spe_pmu_del(struct perf_event *event, int flags)
857 arm_spe_pmu_stop(event, PERF_EF_UPDATE);
860 static void arm_spe_pmu_read(struct perf_event *event)
864 static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
865 int nr_pages, bool snapshot)
867 int i, cpu = event->cpu;
868 struct page **pglist;
869 struct arm_spe_pmu_buf *buf;
871 /* We need at least two pages for this to work. */
872 if (nr_pages < 2)
873 return NULL;
876 * We require an even number of pages for snapshot mode, so that
877 * we can effectively treat the buffer as consisting of two equal
878 * parts and give userspace a fighting chance of getting some
879 * useful data out of it.
881 if (snapshot && (nr_pages & 1))
882 return NULL;
884 if (cpu == -1)
885 cpu = raw_smp_processor_id();
887 buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
888 if (!buf)
889 return NULL;
891 pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
892 if (!pglist)
893 goto out_free_buf;
895 for (i = 0; i < nr_pages; ++i)
896 pglist[i] = virt_to_page(pages[i]);
898 buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
899 if (!buf->base)
900 goto out_free_pglist;
902 buf->nr_pages = nr_pages;
903 buf->snapshot = snapshot;
905 kfree(pglist);
906 return buf;
908 out_free_pglist:
909 kfree(pglist);
910 out_free_buf:
911 kfree(buf);
912 return NULL;
915 static void arm_spe_pmu_free_aux(void *aux)
917 struct arm_spe_pmu_buf *buf = aux;
919 vunmap(buf->base);
920 kfree(buf);
923 /* Initialisation and teardown functions */
924 static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
926 static atomic_t pmu_idx = ATOMIC_INIT(-1);
928 int idx;
929 char *name;
930 struct device *dev = &spe_pmu->pdev->dev;
932 spe_pmu->pmu = (struct pmu) {
933 .module = THIS_MODULE,
934 .parent = &spe_pmu->pdev->dev,
935 .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
936 .attr_groups = arm_spe_pmu_attr_groups,
938 * We hitch a ride on the software context here, so that
939 * we can support per-task profiling (which is not possible
940 * with the invalid context as it doesn't get sched callbacks).
941 * This requires that userspace either uses a dummy event for
942 * perf_event_open, since the aux buffer is not setup until
943 * a subsequent mmap, or creates the profiling event in a
944 * disabled state and explicitly PERF_EVENT_IOC_ENABLEs it
945 * once the buffer has been created.
947 .task_ctx_nr = perf_sw_context,
948 .event_init = arm_spe_pmu_event_init,
949 .add = arm_spe_pmu_add,
950 .del = arm_spe_pmu_del,
951 .start = arm_spe_pmu_start,
952 .stop = arm_spe_pmu_stop,
953 .read = arm_spe_pmu_read,
954 .setup_aux = arm_spe_pmu_setup_aux,
955 .free_aux = arm_spe_pmu_free_aux,
958 idx = atomic_inc_return(&pmu_idx);
959 name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", PMUNAME, idx);
960 if (!name) {
961 dev_err(dev, "failed to allocate name for pmu %d\n", idx);
962 return -ENOMEM;
965 return perf_pmu_register(&spe_pmu->pmu, name, -1);
968 static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu)
970 perf_pmu_unregister(&spe_pmu->pmu);
973 static void __arm_spe_pmu_dev_probe(void *info)
975 int fld;
976 u64 reg;
977 struct arm_spe_pmu *spe_pmu = info;
978 struct device *dev = &spe_pmu->pdev->dev;
980 fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1),
981 ID_AA64DFR0_EL1_PMSVer_SHIFT);
982 if (!fld) {
983 dev_err(dev,
984 "unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n",
985 fld, smp_processor_id());
986 return;
988 spe_pmu->pmsver = (u16)fld;
990 /* Read PMBIDR first to determine whether or not we have access */
991 reg = read_sysreg_s(SYS_PMBIDR_EL1);
992 if (FIELD_GET(PMBIDR_EL1_P, reg)) {
993 dev_err(dev,
994 "profiling buffer owned by higher exception level\n");
995 return;
998 /* Minimum alignment. If it's out-of-range, then fail the probe */
999 fld = FIELD_GET(PMBIDR_EL1_ALIGN, reg);
1000 spe_pmu->align = 1 << fld;
1001 if (spe_pmu->align > SZ_2K) {
1002 dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
1003 fld, smp_processor_id());
1004 return;
1007 /* It's now safe to read PMSIDR and figure out what we've got */
1008 reg = read_sysreg_s(SYS_PMSIDR_EL1);
1009 if (FIELD_GET(PMSIDR_EL1_FE, reg))
1010 spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
1012 if (FIELD_GET(PMSIDR_EL1_FnE, reg))
1013 spe_pmu->features |= SPE_PMU_FEAT_INV_FILT_EVT;
1015 if (FIELD_GET(PMSIDR_EL1_FT, reg))
1016 spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
1018 if (FIELD_GET(PMSIDR_EL1_FL, reg))
1019 spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
1021 if (FIELD_GET(PMSIDR_EL1_ARCHINST, reg))
1022 spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
1024 if (FIELD_GET(PMSIDR_EL1_LDS, reg))
1025 spe_pmu->features |= SPE_PMU_FEAT_LDS;
1027 if (FIELD_GET(PMSIDR_EL1_ERND, reg))
1028 spe_pmu->features |= SPE_PMU_FEAT_ERND;
1030 /* This field has a spaced out encoding, so just use a look-up */
1031 fld = FIELD_GET(PMSIDR_EL1_INTERVAL, reg);
1032 switch (fld) {
1033 case PMSIDR_EL1_INTERVAL_256:
1034 spe_pmu->min_period = 256;
1035 break;
1036 case PMSIDR_EL1_INTERVAL_512:
1037 spe_pmu->min_period = 512;
1038 break;
1039 case PMSIDR_EL1_INTERVAL_768:
1040 spe_pmu->min_period = 768;
1041 break;
1042 case PMSIDR_EL1_INTERVAL_1024:
1043 spe_pmu->min_period = 1024;
1044 break;
1045 case PMSIDR_EL1_INTERVAL_1536:
1046 spe_pmu->min_period = 1536;
1047 break;
1048 case PMSIDR_EL1_INTERVAL_2048:
1049 spe_pmu->min_period = 2048;
1050 break;
1051 case PMSIDR_EL1_INTERVAL_3072:
1052 spe_pmu->min_period = 3072;
1053 break;
1054 default:
1055 dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n",
1056 fld);
1057 fallthrough;
1058 case PMSIDR_EL1_INTERVAL_4096:
1059 spe_pmu->min_period = 4096;
1062 /* Maximum record size. If it's out-of-range, then fail the probe */
1063 fld = FIELD_GET(PMSIDR_EL1_MAXSIZE, reg);
1064 spe_pmu->max_record_sz = 1 << fld;
1065 if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
1066 dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
1067 fld, smp_processor_id());
1068 return;
1071 fld = FIELD_GET(PMSIDR_EL1_COUNTSIZE, reg);
1072 switch (fld) {
1073 default:
1074 dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
1075 fld);
1076 fallthrough;
1077 case PMSIDR_EL1_COUNTSIZE_12_BIT_SAT:
1078 spe_pmu->counter_sz = 12;
1079 break;
1080 case PMSIDR_EL1_COUNTSIZE_16_BIT_SAT:
1081 spe_pmu->counter_sz = 16;
1084 dev_info(dev,
1085 "probed SPEv1.%d for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
1086 spe_pmu->pmsver - 1, cpumask_pr_args(&spe_pmu->supported_cpus),
1087 spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
1089 spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
1092 static void __arm_spe_pmu_reset_local(void)
1095 * This is probably overkill, as we have no idea where we're
1096 * draining any buffered data to...
1098 arm_spe_pmu_disable_and_drain_local();
1100 /* Reset the buffer base pointer */
1101 write_sysreg_s(0, SYS_PMBPTR_EL1);
1102 isb();
1104 /* Clear any pending management interrupts */
1105 write_sysreg_s(0, SYS_PMBSR_EL1);
1106 isb();
1109 static void __arm_spe_pmu_setup_one(void *info)
1111 struct arm_spe_pmu *spe_pmu = info;
1113 __arm_spe_pmu_reset_local();
1114 enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE);
1117 static void __arm_spe_pmu_stop_one(void *info)
1119 struct arm_spe_pmu *spe_pmu = info;
1121 disable_percpu_irq(spe_pmu->irq);
1122 __arm_spe_pmu_reset_local();
1125 static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node)
1127 struct arm_spe_pmu *spe_pmu;
1129 spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
1130 if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
1131 return 0;
1133 __arm_spe_pmu_setup_one(spe_pmu);
1134 return 0;
1137 static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node)
1139 struct arm_spe_pmu *spe_pmu;
1141 spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
1142 if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
1143 return 0;
1145 __arm_spe_pmu_stop_one(spe_pmu);
1146 return 0;
1149 static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu)
1151 int ret;
1152 cpumask_t *mask = &spe_pmu->supported_cpus;
1154 /* Make sure we probe the hardware on a relevant CPU */
1155 ret = smp_call_function_any(mask, __arm_spe_pmu_dev_probe, spe_pmu, 1);
1156 if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED))
1157 return -ENXIO;
1159 /* Request our PPIs (note that the IRQ is still disabled) */
1160 ret = request_percpu_irq(spe_pmu->irq, arm_spe_pmu_irq_handler, DRVNAME,
1161 spe_pmu->handle);
1162 if (ret)
1163 return ret;
1166 * Register our hotplug notifier now so we don't miss any events.
1167 * This will enable the IRQ for any supported CPUs that are already
1168 * up.
1170 ret = cpuhp_state_add_instance(arm_spe_pmu_online,
1171 &spe_pmu->hotplug_node);
1172 if (ret)
1173 free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
1175 return ret;
1178 static void arm_spe_pmu_dev_teardown(struct arm_spe_pmu *spe_pmu)
1180 cpuhp_state_remove_instance(arm_spe_pmu_online, &spe_pmu->hotplug_node);
1181 free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
1184 /* Driver and device probing */
1185 static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu)
1187 struct platform_device *pdev = spe_pmu->pdev;
1188 int irq = platform_get_irq(pdev, 0);
1190 if (irq < 0)
1191 return -ENXIO;
1193 if (!irq_is_percpu(irq)) {
1194 dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq);
1195 return -EINVAL;
1198 if (irq_get_percpu_devid_partition(irq, &spe_pmu->supported_cpus)) {
1199 dev_err(&pdev->dev, "failed to get PPI partition (%d)\n", irq);
1200 return -EINVAL;
1203 spe_pmu->irq = irq;
1204 return 0;
1207 static const struct of_device_id arm_spe_pmu_of_match[] = {
1208 { .compatible = "arm,statistical-profiling-extension-v1", .data = (void *)1 },
1209 { /* Sentinel */ },
1211 MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match);
1213 static const struct platform_device_id arm_spe_match[] = {
1214 { ARMV8_SPE_PDEV_NAME, 0},
1217 MODULE_DEVICE_TABLE(platform, arm_spe_match);
1219 static int arm_spe_pmu_device_probe(struct platform_device *pdev)
1221 int ret;
1222 struct arm_spe_pmu *spe_pmu;
1223 struct device *dev = &pdev->dev;
1226 * If kernelspace is unmapped when running at EL0, then the SPE
1227 * buffer will fault and prematurely terminate the AUX session.
1229 if (arm64_kernel_unmapped_at_el0()) {
1230 dev_warn_once(dev, "profiling buffer inaccessible. Try passing \"kpti=off\" on the kernel command line\n");
1231 return -EPERM;
1234 spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL);
1235 if (!spe_pmu)
1236 return -ENOMEM;
1238 spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle));
1239 if (!spe_pmu->handle)
1240 return -ENOMEM;
1242 spe_pmu->pdev = pdev;
1243 platform_set_drvdata(pdev, spe_pmu);
1245 ret = arm_spe_pmu_irq_probe(spe_pmu);
1246 if (ret)
1247 goto out_free_handle;
1249 ret = arm_spe_pmu_dev_init(spe_pmu);
1250 if (ret)
1251 goto out_free_handle;
1253 ret = arm_spe_pmu_perf_init(spe_pmu);
1254 if (ret)
1255 goto out_teardown_dev;
1257 return 0;
1259 out_teardown_dev:
1260 arm_spe_pmu_dev_teardown(spe_pmu);
1261 out_free_handle:
1262 free_percpu(spe_pmu->handle);
1263 return ret;
1266 static void arm_spe_pmu_device_remove(struct platform_device *pdev)
1268 struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
1270 arm_spe_pmu_perf_destroy(spe_pmu);
1271 arm_spe_pmu_dev_teardown(spe_pmu);
1272 free_percpu(spe_pmu->handle);
1275 static struct platform_driver arm_spe_pmu_driver = {
1276 .id_table = arm_spe_match,
1277 .driver = {
1278 .name = DRVNAME,
1279 .of_match_table = of_match_ptr(arm_spe_pmu_of_match),
1280 .suppress_bind_attrs = true,
1282 .probe = arm_spe_pmu_device_probe,
1283 .remove_new = arm_spe_pmu_device_remove,
1286 static int __init arm_spe_pmu_init(void)
1288 int ret;
1290 ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
1291 arm_spe_pmu_cpu_startup,
1292 arm_spe_pmu_cpu_teardown);
1293 if (ret < 0)
1294 return ret;
1295 arm_spe_pmu_online = ret;
1297 ret = platform_driver_register(&arm_spe_pmu_driver);
1298 if (ret)
1299 cpuhp_remove_multi_state(arm_spe_pmu_online);
1301 return ret;
1304 static void __exit arm_spe_pmu_exit(void)
1306 platform_driver_unregister(&arm_spe_pmu_driver);
1307 cpuhp_remove_multi_state(arm_spe_pmu_online);
1310 module_init(arm_spe_pmu_init);
1311 module_exit(arm_spe_pmu_exit);
1313 MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension");
1314 MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
1315 MODULE_LICENSE("GPL v2");