1 // SPDX-License-Identifier: GPL-2.0-only
3 * Regulator driver for LP873X PMIC
5 * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
8 #include <linux/bitfield.h>
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/regmap.h>
13 #include <linux/mfd/lp873x.h>
15 #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
20 .supply_name = _of "-in", \
22 .of_match = of_match_ptr(_of), \
23 .regulators_node = of_match_ptr("regulators"),\
26 .type = REGULATOR_VOLTAGE, \
27 .owner = THIS_MODULE, \
32 .ramp_delay = _delay, \
33 .linear_ranges = _lr, \
34 .n_linear_ranges = ARRAY_SIZE(_lr), \
35 .curr_table = lp873x_buck_uA, \
36 .n_current_limits = ARRAY_SIZE(lp873x_buck_uA), \
38 .csel_mask = LP873X_BUCK0_CTRL_2_BUCK0_ILIM,\
43 struct lp873x_regulator
{
44 struct regulator_desc desc
;
45 unsigned int ctrl2_reg
;
48 static const struct lp873x_regulator regulators
[];
50 static const struct linear_range buck0_buck1_ranges
[] = {
51 REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
52 REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
53 REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
54 REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
57 static const struct linear_range ldo0_ldo1_ranges
[] = {
58 REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
61 static const unsigned int lp873x_buck_ramp_delay
[] = {
62 30000, 15000, 10000, 7500, 3800, 1900, 940, 470
65 /* LP873X BUCK current limit */
66 static const unsigned int lp873x_buck_uA
[] = {
67 1500000, 2000000, 2500000, 3000000, 3500000, 4000000,
70 static int lp873x_buck_set_ramp_delay(struct regulator_dev
*rdev
,
73 int id
= rdev_get_id(rdev
);
74 struct lp873x
*lp873
= rdev_get_drvdata(rdev
);
78 if (ramp_delay
<= 470)
80 else if (ramp_delay
<= 940)
82 else if (ramp_delay
<= 1900)
84 else if (ramp_delay
<= 3800)
86 else if (ramp_delay
<= 7500)
88 else if (ramp_delay
<= 10000)
90 else if (ramp_delay
<= 15000)
95 ret
= regmap_update_bits(lp873
->regmap
, regulators
[id
].ctrl2_reg
,
96 LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE
,
97 FIELD_PREP(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE
, reg
));
99 dev_err(lp873
->dev
, "SLEW RATE write failed: %d\n", ret
);
103 rdev
->constraints
->ramp_delay
= lp873x_buck_ramp_delay
[reg
];
108 /* Operations permitted on BUCK0, BUCK1 */
109 static const struct regulator_ops lp873x_buck01_ops
= {
110 .is_enabled
= regulator_is_enabled_regmap
,
111 .enable
= regulator_enable_regmap
,
112 .disable
= regulator_disable_regmap
,
113 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
114 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
115 .list_voltage
= regulator_list_voltage_linear_range
,
116 .map_voltage
= regulator_map_voltage_linear_range
,
117 .set_voltage_time_sel
= regulator_set_voltage_time_sel
,
118 .set_ramp_delay
= lp873x_buck_set_ramp_delay
,
119 .set_current_limit
= regulator_set_current_limit_regmap
,
120 .get_current_limit
= regulator_get_current_limit_regmap
,
123 /* Operations permitted on LDO0 and LDO1 */
124 static const struct regulator_ops lp873x_ldo01_ops
= {
125 .is_enabled
= regulator_is_enabled_regmap
,
126 .enable
= regulator_enable_regmap
,
127 .disable
= regulator_disable_regmap
,
128 .get_voltage_sel
= regulator_get_voltage_sel_regmap
,
129 .set_voltage_sel
= regulator_set_voltage_sel_regmap
,
130 .list_voltage
= regulator_list_voltage_linear_range
,
131 .map_voltage
= regulator_map_voltage_linear_range
,
134 static const struct lp873x_regulator regulators
[] = {
135 LP873X_REGULATOR("BUCK0", LP873X_BUCK_0
, "buck0", lp873x_buck01_ops
,
136 256, LP873X_REG_BUCK0_VOUT
,
137 LP873X_BUCK0_VOUT_BUCK0_VSET
, LP873X_REG_BUCK0_CTRL_1
,
138 LP873X_BUCK0_CTRL_1_BUCK0_EN
, 10000,
139 buck0_buck1_ranges
, LP873X_REG_BUCK0_CTRL_2
),
140 LP873X_REGULATOR("BUCK1", LP873X_BUCK_1
, "buck1", lp873x_buck01_ops
,
141 256, LP873X_REG_BUCK1_VOUT
,
142 LP873X_BUCK1_VOUT_BUCK1_VSET
, LP873X_REG_BUCK1_CTRL_1
,
143 LP873X_BUCK1_CTRL_1_BUCK1_EN
, 10000,
144 buck0_buck1_ranges
, LP873X_REG_BUCK1_CTRL_2
),
145 LP873X_REGULATOR("LDO0", LP873X_LDO_0
, "ldo0", lp873x_ldo01_ops
, 26,
146 LP873X_REG_LDO0_VOUT
, LP873X_LDO0_VOUT_LDO0_VSET
,
147 LP873X_REG_LDO0_CTRL
,
148 LP873X_LDO0_CTRL_LDO0_EN
, 0, ldo0_ldo1_ranges
, 0xFF),
149 LP873X_REGULATOR("LDO1", LP873X_LDO_1
, "ldo1", lp873x_ldo01_ops
, 26,
150 LP873X_REG_LDO1_VOUT
, LP873X_LDO1_VOUT_LDO1_VSET
,
151 LP873X_REG_LDO1_CTRL
,
152 LP873X_LDO1_CTRL_LDO1_EN
, 0, ldo0_ldo1_ranges
, 0xFF),
155 static int lp873x_regulator_probe(struct platform_device
*pdev
)
157 struct lp873x
*lp873
= dev_get_drvdata(pdev
->dev
.parent
);
158 struct regulator_config config
= { };
159 struct regulator_dev
*rdev
;
162 platform_set_drvdata(pdev
, lp873
);
164 config
.dev
= &pdev
->dev
;
165 config
.dev
->of_node
= lp873
->dev
->of_node
;
166 config
.driver_data
= lp873
;
167 config
.regmap
= lp873
->regmap
;
169 for (i
= 0; i
< ARRAY_SIZE(regulators
); i
++) {
170 rdev
= devm_regulator_register(&pdev
->dev
, ®ulators
[i
].desc
,
173 dev_err(lp873
->dev
, "failed to register %s regulator\n",
175 return PTR_ERR(rdev
);
182 static const struct platform_device_id lp873x_regulator_id_table
[] = {
183 { "lp873x-regulator", },
186 MODULE_DEVICE_TABLE(platform
, lp873x_regulator_id_table
);
188 static struct platform_driver lp873x_regulator_driver
= {
190 .name
= "lp873x-pmic",
191 .probe_type
= PROBE_PREFER_ASYNCHRONOUS
,
193 .probe
= lp873x_regulator_probe
,
194 .id_table
= lp873x_regulator_id_table
,
196 module_platform_driver(lp873x_regulator_driver
);
198 MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
199 MODULE_DESCRIPTION("LP873X voltage regulator driver");
200 MODULE_ALIAS("platform:lp873x-pmic");
201 MODULE_LICENSE("GPL v2");