turns printfs back on

[freebsd-src/fkvm-freebsd.git] / contrib / libpcap / savefile.c

/*
 * Copyright (c) 1993, 1994, 1995, 1996, 1997
 *      The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that: (1) source code distributions
 * retain the above copyright notice and this paragraph in its entirety, (2)
 * distributions including binary code include the above copyright notice and
 * this paragraph in its entirety in the documentation or other materials
 * provided with the distribution, and (3) all advertising materials mentioning
 * features or use of this software display the following acknowledgement:
 * ``This product includes software developed by the University of California,
 * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
 * the University nor the names of its contributors may be used to endorse
 * or promote products derived from this software without specific prior
 * written permission.
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 *
 * savefile.c - supports offline use of tcpdump
 *      Extraction/creation by Jeffrey Mogul, DECWRL
 *      Modified by Steve McCanne, LBL.
 *
 * Used to save the received packet headers, after filtering, to
 * a file, and then read them later.
 * The first record in the file contains saved values for the machine
 * dependent values so we can print the dump file on any architecture.
 */

#ifndef lint
static const char rcsid[] _U_ =
    "@(#) $Header: /tcpdump/master/libpcap/savefile.c,v 1.126.2.30 2007/08/14 20:57:49 guy Exp $ (LBL)";
#endif

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <errno.h>
#include <memory.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "pcap-int.h"

#ifdef HAVE_OS_PROTO_H
#include "os-proto.h"
#endif

/*
 * Standard libpcap format.
 */
#define TCPDUMP_MAGIC           0xa1b2c3d4

/*
 * Alexey Kuznetzov's modified libpcap format.
 */
#define KUZNETZOV_TCPDUMP_MAGIC 0xa1b2cd34

/*
 * Reserved for Francisco Mesquita <francisco.mesquita@radiomovel.pt>
 * for another modified format.
 */
#define FMESQUITA_TCPDUMP_MAGIC 0xa1b234cd

/*
 * Navtel Communcations' format, with nanosecond timestamps,
 * as per a request from Dumas Hwang <dumas.hwang@navtelcom.com>.
 */
#define NAVTEL_TCPDUMP_MAGIC    0xa12b3c4d

/*
 * Normal libpcap format, except for seconds/nanoseconds timestamps,
 * as per a request by Ulf Lamping <ulf.lamping@web.de>
 */
#define NSEC_TCPDUMP_MAGIC      0xa1b23c4d

/*
 * We use the "receiver-makes-right" approach to byte order,
 * because time is at a premium when we are writing the file.
 * In other words, the pcap_file_header and pcap_pkthdr,
 * records are written in host byte order.
 * Note that the bytes of packet data are written out in the order in
 * which they were received, so multi-byte fields in packets are not
 * written in host byte order, they're written in whatever order the
 * sending machine put them in.
 *
 * ntoh[ls] aren't sufficient because we might need to swap on a big-endian
 * machine (if the file was written in little-end order).
 */
#define SWAPLONG(y) \
((((y)&0xff)<<24) | (((y)&0xff00)<<8) | (((y)&0xff0000)>>8) | (((y)>>24)&0xff))
#define SWAPSHORT(y) \
        ( (((y)&0xff)<<8) | ((u_short)((y)&0xff00)>>8) )

#define SFERR_TRUNC             1
#define SFERR_BADVERSION        2
#define SFERR_BADF              3
#define SFERR_EOF               4 /* not really an error, just a status */

/*
 * Setting O_BINARY on DOS/Windows is a bit tricky
 */
#if defined(WIN32)
  #define SET_BINMODE(f)  _setmode(_fileno(f), _O_BINARY)
#elif defined(MSDOS)
  #if defined(__HIGHC__)
  #define SET_BINMODE(f)  setmode(f, O_BINARY)
  #else
  #define SET_BINMODE(f)  setmode(fileno(f), O_BINARY)
  #endif
#endif

/*
 * We don't write DLT_* values to the capture file header, because
 * they're not the same on all platforms.
 *
 * Unfortunately, the various flavors of BSD have not always used the same
 * numerical values for the same data types, and various patches to
 * libpcap for non-BSD OSes have added their own DLT_* codes for link
 * layer encapsulation types seen on those OSes, and those codes have had,
 * in some cases, values that were also used, on other platforms, for other
 * link layer encapsulation types.
 *
 * This means that capture files of a type whose numerical DLT_* code
 * means different things on different BSDs, or with different versions
 * of libpcap, can't always be read on systems other than those like
 * the one running on the machine on which the capture was made.
 *
 * Instead, we define here a set of LINKTYPE_* codes, and map DLT_* codes
 * to LINKTYPE_* codes when writing a savefile header, and map LINKTYPE_*
 * codes to DLT_* codes when reading a savefile header.
 *
 * For those DLT_* codes that have, as far as we know, the same values on
 * all platforms (DLT_NULL through DLT_FDDI), we define LINKTYPE_xxx as
 * DLT_xxx; that way, captures of those types can still be read by
 * versions of libpcap that map LINKTYPE_* values to DLT_* values, and
 * captures of those types written by versions of libpcap that map DLT_
 * values to LINKTYPE_ values can still be read by older versions
 * of libpcap.
 *
 * The other LINKTYPE_* codes are given values starting at 100, in the
 * hopes that no DLT_* code will be given one of those values.
 *
 * In order to ensure that a given LINKTYPE_* code's value will refer to
 * the same encapsulation type on all platforms, you should not allocate
 * a new LINKTYPE_* value without consulting "tcpdump-workers@tcpdump.org".
 * The tcpdump developers will allocate a value for you, and will not
 * subsequently allocate it to anybody else; that value will be added to
 * the "pcap.h" in the tcpdump.org CVS repository, so that a future
 * libpcap release will include it.
 *
 * You should, if possible, also contribute patches to libpcap and tcpdump
 * to handle the new encapsulation type, so that they can also be checked
 * into the tcpdump.org CVS repository and so that they will appear in
 * future libpcap and tcpdump releases.
 *
 * Do *NOT* assume that any values after the largest value in this file
 * are available; you might not have the most up-to-date version of this
 * file, and new values after that one might have been assigned.  Also,
 * do *NOT* use any values below 100 - those might already have been
 * taken by one (or more!) organizations.
 */
#define LINKTYPE_NULL           DLT_NULL
#define LINKTYPE_ETHERNET       DLT_EN10MB      /* also for 100Mb and up */
#define LINKTYPE_EXP_ETHERNET   DLT_EN3MB       /* 3Mb experimental Ethernet */
#define LINKTYPE_AX25           DLT_AX25
#define LINKTYPE_PRONET         DLT_PRONET
#define LINKTYPE_CHAOS          DLT_CHAOS
#define LINKTYPE_TOKEN_RING     DLT_IEEE802     /* DLT_IEEE802 is used for Token Ring */
#define LINKTYPE_ARCNET         DLT_ARCNET      /* BSD-style headers */
#define LINKTYPE_SLIP           DLT_SLIP
#define LINKTYPE_PPP            DLT_PPP
#define LINKTYPE_FDDI           DLT_FDDI

/*
 * LINKTYPE_PPP is for use when there might, or might not, be an RFC 1662
 * PPP in HDLC-like framing header (with 0xff 0x03 before the PPP protocol
 * field) at the beginning of the packet.
 *
 * This is for use when there is always such a header; the address field
 * might be 0xff, for regular PPP, or it might be an address field for Cisco
 * point-to-point with HDLC framing as per section 4.3.1 of RFC 1547 ("Cisco
 * HDLC").  This is, for example, what you get with NetBSD's DLT_PPP_SERIAL.
 *
 * We give it the same value as NetBSD's DLT_PPP_SERIAL, in the hopes that
 * nobody else will choose a DLT_ value of 50, and so that DLT_PPP_SERIAL
 * captures will be written out with a link type that NetBSD's tcpdump
 * can read.
 */
#define LINKTYPE_PPP_HDLC       50              /* PPP in HDLC-like framing */

#define LINKTYPE_PPP_ETHER      51              /* NetBSD PPP-over-Ethernet */

#define LINKTYPE_SYMANTEC_FIREWALL 99           /* Symantec Enterprise Firewall */

#define LINKTYPE_ATM_RFC1483    100             /* LLC/SNAP-encapsulated ATM */
#define LINKTYPE_RAW            101             /* raw IP */
#define LINKTYPE_SLIP_BSDOS     102             /* BSD/OS SLIP BPF header */
#define LINKTYPE_PPP_BSDOS      103             /* BSD/OS PPP BPF header */
#define LINKTYPE_C_HDLC         104             /* Cisco HDLC */
#define LINKTYPE_IEEE802_11     105             /* IEEE 802.11 (wireless) */
#define LINKTYPE_ATM_CLIP       106             /* Linux Classical IP over ATM */
#define LINKTYPE_FRELAY         107             /* Frame Relay */
#define LINKTYPE_LOOP           108             /* OpenBSD loopback */
#define LINKTYPE_ENC            109             /* OpenBSD IPSEC enc */

/*
 * These three types are reserved for future use.
 */
#define LINKTYPE_LANE8023       110             /* ATM LANE + 802.3 */
#define LINKTYPE_HIPPI          111             /* NetBSD HIPPI */
#define LINKTYPE_HDLC           112             /* NetBSD HDLC framing */

#define LINKTYPE_LINUX_SLL      113             /* Linux cooked socket capture */
#define LINKTYPE_LTALK          114             /* Apple LocalTalk hardware */
#define LINKTYPE_ECONET         115             /* Acorn Econet */

/*
 * Reserved for use with OpenBSD ipfilter.
 */
#define LINKTYPE_IPFILTER       116

#define LINKTYPE_PFLOG          117             /* OpenBSD DLT_PFLOG */
#define LINKTYPE_CISCO_IOS      118             /* For Cisco-internal use */
#define LINKTYPE_PRISM_HEADER   119             /* 802.11+Prism II monitor mode */
#define LINKTYPE_AIRONET_HEADER 120             /* FreeBSD Aironet driver stuff */

/*
 * Reserved for Siemens HiPath HDLC.
 */
#define LINKTYPE_HHDLC          121

#define LINKTYPE_IP_OVER_FC     122             /* RFC 2625 IP-over-Fibre Channel */
#define LINKTYPE_SUNATM         123             /* Solaris+SunATM */

/*
 * Reserved as per request from Kent Dahlgren <kent@praesum.com>
 * for private use.
 */
#define LINKTYPE_RIO            124             /* RapidIO */
#define LINKTYPE_PCI_EXP        125             /* PCI Express */
#define LINKTYPE_AURORA         126             /* Xilinx Aurora link layer */

#define LINKTYPE_IEEE802_11_RADIO 127           /* 802.11 plus BSD radio header */

/*
 * Reserved for the TZSP encapsulation, as per request from
 * Chris Waters <chris.waters@networkchemistry.com>
 * TZSP is a generic encapsulation for any other link type,
 * which includes a means to include meta-information
 * with the packet, e.g. signal strength and channel
 * for 802.11 packets.
 */
#define LINKTYPE_TZSP           128             /* Tazmen Sniffer Protocol */

#define LINKTYPE_ARCNET_LINUX   129             /* Linux-style headers */

/*
 * Juniper-private data link types, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The corresponding
 * DLT_s are used for passing on chassis-internal
 * metainformation such as QOS profiles, etc..
 */
#define LINKTYPE_JUNIPER_MLPPP  130
#define LINKTYPE_JUNIPER_MLFR   131
#define LINKTYPE_JUNIPER_ES     132
#define LINKTYPE_JUNIPER_GGSN   133
#define LINKTYPE_JUNIPER_MFR    134
#define LINKTYPE_JUNIPER_ATM2   135
#define LINKTYPE_JUNIPER_SERVICES 136
#define LINKTYPE_JUNIPER_ATM1   137

#define LINKTYPE_APPLE_IP_OVER_IEEE1394 138     /* Apple IP-over-IEEE 1394 cooked header */

#define LINKTYPE_MTP2_WITH_PHDR 139
#define LINKTYPE_MTP2           140
#define LINKTYPE_MTP3           141
#define LINKTYPE_SCCP           142

#define LINKTYPE_DOCSIS         143             /* DOCSIS MAC frames */

#define LINKTYPE_LINUX_IRDA     144             /* Linux-IrDA */

/*
 * Reserved for IBM SP switch and IBM Next Federation switch.
 */
#define LINKTYPE_IBM_SP         145
#define LINKTYPE_IBM_SN         146

/*
 * Reserved for private use.  If you have some link-layer header type
 * that you want to use within your organization, with the capture files
 * using that link-layer header type not ever be sent outside your
 * organization, you can use these values.
 *
 * No libpcap release will use these for any purpose, nor will any
 * tcpdump release use them, either.
 *
 * Do *NOT* use these in capture files that you expect anybody not using
 * your private versions of capture-file-reading tools to read; in
 * particular, do *NOT* use them in products, otherwise you may find that
 * people won't be able to use tcpdump, or snort, or Ethereal, or... to
 * read capture files from your firewall/intrusion detection/traffic
 * monitoring/etc. appliance, or whatever product uses that LINKTYPE_ value,
 * and you may also find that the developers of those applications will
 * not accept patches to let them read those files.
 *
 * Also, do not use them if somebody might send you a capture using them
 * for *their* private type and tools using them for *your* private type
 * would have to read them.
 *
 * Instead, in those cases, ask "tcpdump-workers@tcpdump.org" for a new DLT_
 * and LINKTYPE_ value, as per the comment in pcap-bpf.h, and use the type
 * you're given.
 */
#define LINKTYPE_USER0          147
#define LINKTYPE_USER1          148
#define LINKTYPE_USER2          149
#define LINKTYPE_USER3          150
#define LINKTYPE_USER4          151
#define LINKTYPE_USER5          152
#define LINKTYPE_USER6          153
#define LINKTYPE_USER7          154
#define LINKTYPE_USER8          155
#define LINKTYPE_USER9          156
#define LINKTYPE_USER10         157
#define LINKTYPE_USER11         158
#define LINKTYPE_USER12         159
#define LINKTYPE_USER13         160
#define LINKTYPE_USER14         161
#define LINKTYPE_USER15         162

/*
 * For future use with 802.11 captures - defined by AbsoluteValue
 * Systems to store a number of bits of link-layer information
 * including radio information:
 *
 *      http://www.shaftnet.org/~pizza/software/capturefrm.txt
 *
 * but could and arguably should also be used by non-AVS Linux
 * 802.11 drivers; that may happen in the future.
 */
#define LINKTYPE_IEEE802_11_RADIO_AVS 163       /* 802.11 plus AVS radio header */

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The corresponding
 * DLT_s are used for passing on chassis-internal
 * metainformation such as QOS profiles, etc..
 */
#define LINKTYPE_JUNIPER_MONITOR 164

/*
 * Reserved for BACnet MS/TP.
 */
#define LINKTYPE_BACNET_MS_TP   165

/*
 * Another PPP variant as per request from Karsten Keil <kkeil@suse.de>.
 *
 * This is used in some OSes to allow a kernel socket filter to distinguish
 * between incoming and outgoing packets, on a socket intended to
 * supply pppd with outgoing packets so it can do dial-on-demand and
 * hangup-on-lack-of-demand; incoming packets are filtered out so they
 * don't cause pppd to hold the connection up (you don't want random
 * input packets such as port scans, packets from old lost connections,
 * etc. to force the connection to stay up).
 *
 * The first byte of the PPP header (0xff03) is modified to accomodate
 * the direction - 0x00 = IN, 0x01 = OUT.
 */
#define LINKTYPE_PPP_PPPD       166

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The DLT_s are used
 * for passing on chassis-internal metainformation such as
 * QOS profiles, cookies, etc..
 */
#define LINKTYPE_JUNIPER_PPPOE     167
#define LINKTYPE_JUNIPER_PPPOE_ATM 168

#define LINKTYPE_GPRS_LLC       169             /* GPRS LLC */
#define LINKTYPE_GPF_T          170             /* GPF-T (ITU-T G.7041/Y.1303) */
#define LINKTYPE_GPF_F          171             /* GPF-T (ITU-T G.7041/Y.1303) */

/*
 * Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line
 * monitoring equipment.
 */
#define LINKTYPE_GCOM_T1E1      172
#define LINKTYPE_GCOM_SERIAL    173

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>.  The DLT_ is used
 * for internal communication to Physical Interface Cards (PIC)
 */
#define LINKTYPE_JUNIPER_PIC_PEER    174

/*
 * Link types requested by Gregor Maier <gregor@endace.com> of Endace
 * Measurement Systems.  They add an ERF header (see
 * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
 * the link-layer header.
 */
#define LINKTYPE_ERF_ETH        175     /* Ethernet */
#define LINKTYPE_ERF_POS        176     /* Packet-over-SONET */

/*
 * Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD
 * for vISDN (http://www.orlandi.com/visdn/).  Its link-layer header
 * includes additional information before the LAPD header, so it's
 * not necessarily a generic LAPD header.
 */
#define LINKTYPE_LINUX_LAPD     177

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>. 
 * The Link Types are used for prepending meta-information
 * like interface index, interface name
 * before standard Ethernet, PPP, Frelay & C-HDLC Frames
 */
#define LINKTYPE_JUNIPER_ETHER  178
#define LINKTYPE_JUNIPER_PPP    179
#define LINKTYPE_JUNIPER_FRELAY 180
#define LINKTYPE_JUNIPER_CHDLC  181

/*
 * Multi Link Frame Relay (FRF.16)
 */
#define LINKTYPE_MFR            182

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>. 
 * The DLT_ is used for internal communication with a
 * voice Adapter Card (PIC)
 */
#define LINKTYPE_JUNIPER_VP     183

/*
 * Arinc 429 frames.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 * Every frame contains a 32bit A429 label.
 * More documentation on Arinc 429 can be found at
 * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
 */
#define LINKTYPE_A429           184

/*
 * Arinc 653 Interpartition Communication messages.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 * Please refer to the A653-1 standard for more information.
 */
#define LINKTYPE_A653_ICM       185

/*
 * USB packets, beginning with a USB setup header; requested by
 * Paolo Abeni <paolo.abeni@email.it>.
 */
#define LINKTYPE_USB            186

/*
 * Bluetooth HCI UART transport layer (part H:4); requested by
 * Paolo Abeni.
 */
#define LINKTYPE_BLUETOOTH_HCI_H4       187

/*
 * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz
 * <cruz_petagay@bah.com>.
 */
#define LINKTYPE_IEEE802_16_MAC_CPS     188

/*
 * USB packets, beginning with a Linux USB header; requested by
 * Paolo Abeni <paolo.abeni@email.it>.
 */
#define LINKTYPE_USB_LINUX      189

/*
 * Controller Area Network (CAN) v. 2.0B packets.
 * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 * Used to dump CAN packets coming from a CAN Vector board.
 * More documentation on the CAN v2.0B frames can be found at
 * http://www.can-cia.org/downloads/?269
 */
#define LINKTYPE_CAN20B         190

/*
 * IEEE 802.15.4, with address fields padded, as is done by Linux
 * drivers; requested by Juergen Schimmer.
 */
#define LINKTYPE_IEEE802_15_4_LINUX     191

/*
 * Per Packet Information encapsulated packets.
 * LINKTYPE_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
 */
#define LINKTYPE_PPI                    192

/*
 * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header;
 * requested by Charles Clancy.
 */
#define LINKTYPE_IEEE802_16_MAC_CPS_RADIO       193

/*
 * Juniper-private data link type, as per request from
 * Hannes Gredler <hannes@juniper.net>. 
 * The DLT_ is used for internal communication with a
 * integrated service module (ISM).
 */
#define LINKTYPE_JUNIPER_ISM    194

/*
 * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
 * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>.
 */
#define LINKTYPE_IEEE802_15_4   195

/*
 * Various link-layer types, with a pseudo-header, for SITA
 * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
 */
#define LINKTYPE_SITA           196

/*
 * Various link-layer types, with a pseudo-header, for Endace DAG cards;
 * encapsulates Endace ERF records.  Requested by Stephen Donnelly
 * <stephen@endace.com>.
 */
#define LINKTYPE_ERF            197

/*
 * Special header prepended to Ethernet packets when capturing from a
 * u10 Networks board.  Requested by Phil Mulholland
 * <phil@u10networks.com>.
 */
#define LINKTYPE_RAIF1          198

/*
 * IPMB packet for IPMI, beginning with the I2C slave address, followed
 * by the netFn and LUN, etc..  Requested by Chanthy Toeung
 * <chanthy.toeung@ca.kontron.com>.
 */
#define LINKTYPE_IPMB           199


static struct linktype_map {
        int     dlt;
        int     linktype;
} map[] = {
        /*
         * These DLT_* codes have LINKTYPE_* codes with values identical
         * to the values of the corresponding DLT_* code.
         */
        { DLT_NULL,             LINKTYPE_NULL },
        { DLT_EN10MB,           LINKTYPE_ETHERNET },
        { DLT_EN3MB,            LINKTYPE_EXP_ETHERNET },
        { DLT_AX25,             LINKTYPE_AX25 },
        { DLT_PRONET,           LINKTYPE_PRONET },
        { DLT_CHAOS,            LINKTYPE_CHAOS },
        { DLT_IEEE802,          LINKTYPE_TOKEN_RING },
        { DLT_ARCNET,           LINKTYPE_ARCNET },
        { DLT_SLIP,             LINKTYPE_SLIP },
        { DLT_PPP,              LINKTYPE_PPP },
        { DLT_FDDI,             LINKTYPE_FDDI },

        /*
         * These DLT_* codes have different values on different
         * platforms; we map them to LINKTYPE_* codes that
         * have values that should never be equal to any DLT_*
         * code.
         */
#ifdef DLT_FR
        /* BSD/OS Frame Relay */
        { DLT_FR,               LINKTYPE_FRELAY },
#endif

        { DLT_SYMANTEC_FIREWALL, LINKTYPE_SYMANTEC_FIREWALL },
        { DLT_ATM_RFC1483,      LINKTYPE_ATM_RFC1483 },
        { DLT_RAW,              LINKTYPE_RAW },
        { DLT_SLIP_BSDOS,       LINKTYPE_SLIP_BSDOS },
        { DLT_PPP_BSDOS,        LINKTYPE_PPP_BSDOS },

        /* BSD/OS Cisco HDLC */
        { DLT_C_HDLC,           LINKTYPE_C_HDLC },

        /*
         * These DLT_* codes are not on all platforms, but, so far,
         * there don't appear to be any platforms that define
         * other codes with those values; we map them to
         * different LINKTYPE_* values anyway, just in case.
         */

        /* Linux ATM Classical IP */
        { DLT_ATM_CLIP,         LINKTYPE_ATM_CLIP },

        /* NetBSD sync/async serial PPP (or Cisco HDLC) */
        { DLT_PPP_SERIAL,       LINKTYPE_PPP_HDLC },

        /* NetBSD PPP over Ethernet */
        { DLT_PPP_ETHER,        LINKTYPE_PPP_ETHER },

        /* IEEE 802.11 wireless */
        { DLT_IEEE802_11,       LINKTYPE_IEEE802_11 },

        /* Frame Relay */
        { DLT_FRELAY,           LINKTYPE_FRELAY },

        /* OpenBSD loopback */
        { DLT_LOOP,             LINKTYPE_LOOP },

        /* Linux cooked socket capture */
        { DLT_LINUX_SLL,        LINKTYPE_LINUX_SLL },

        /* Apple LocalTalk hardware */
        { DLT_LTALK,            LINKTYPE_LTALK },

        /* Acorn Econet */
        { DLT_ECONET,           LINKTYPE_ECONET },

        /* OpenBSD DLT_PFLOG */
        { DLT_PFLOG,            LINKTYPE_PFLOG },

        /* For Cisco-internal use */
        { DLT_CISCO_IOS,        LINKTYPE_CISCO_IOS },

        /* Prism II monitor-mode header plus 802.11 header */
        { DLT_PRISM_HEADER,     LINKTYPE_PRISM_HEADER },

        /* FreeBSD Aironet driver stuff */
        { DLT_AIRONET_HEADER,   LINKTYPE_AIRONET_HEADER },

        /* Siemens HiPath HDLC */
        { DLT_HHDLC,            LINKTYPE_HHDLC },

        /* RFC 2625 IP-over-Fibre Channel */
        { DLT_IP_OVER_FC,       LINKTYPE_IP_OVER_FC },

        /* Solaris+SunATM */
        { DLT_SUNATM,           LINKTYPE_SUNATM },

        /* RapidIO */
        { DLT_RIO,              LINKTYPE_RIO },

        /* PCI Express */
        { DLT_PCI_EXP,          LINKTYPE_PCI_EXP },

        /* Xilinx Aurora link layer */
        { DLT_AURORA,           LINKTYPE_AURORA },

        /* 802.11 plus BSD radio header */
        { DLT_IEEE802_11_RADIO, LINKTYPE_IEEE802_11_RADIO },

        /* Tazmen Sniffer Protocol */
        { DLT_TZSP,             LINKTYPE_TZSP },

        /* Arcnet with Linux-style link-layer headers */
        { DLT_ARCNET_LINUX,     LINKTYPE_ARCNET_LINUX },

        /* Juniper-internal chassis encapsulation */
        { DLT_JUNIPER_MLPPP,    LINKTYPE_JUNIPER_MLPPP },
        { DLT_JUNIPER_MLFR,     LINKTYPE_JUNIPER_MLFR },
        { DLT_JUNIPER_ES,       LINKTYPE_JUNIPER_ES },
        { DLT_JUNIPER_GGSN,     LINKTYPE_JUNIPER_GGSN },
        { DLT_JUNIPER_MFR,      LINKTYPE_JUNIPER_MFR },
        { DLT_JUNIPER_ATM2,     LINKTYPE_JUNIPER_ATM2 },
        { DLT_JUNIPER_SERVICES, LINKTYPE_JUNIPER_SERVICES },
        { DLT_JUNIPER_ATM1,     LINKTYPE_JUNIPER_ATM1 },

        /* Apple IP-over-IEEE 1394 cooked header */
        { DLT_APPLE_IP_OVER_IEEE1394, LINKTYPE_APPLE_IP_OVER_IEEE1394 },

        /* SS7 */
        { DLT_MTP2_WITH_PHDR,   LINKTYPE_MTP2_WITH_PHDR },
        { DLT_MTP2,             LINKTYPE_MTP2 },
        { DLT_MTP3,             LINKTYPE_MTP3 },
        { DLT_SCCP,             LINKTYPE_SCCP },

        /* DOCSIS MAC frames */
        { DLT_DOCSIS,           LINKTYPE_DOCSIS },

        /* IrDA IrLAP packets + Linux-cooked header */
        { DLT_LINUX_IRDA,       LINKTYPE_LINUX_IRDA },

        /* IBM SP and Next Federation switches */
        { DLT_IBM_SP,           LINKTYPE_IBM_SP },
        { DLT_IBM_SN,           LINKTYPE_IBM_SN },

        /* 802.11 plus AVS radio header */
        { DLT_IEEE802_11_RADIO_AVS, LINKTYPE_IEEE802_11_RADIO_AVS },

        /*
         * Any platform that defines additional DLT_* codes should:
         *
         *      request a LINKTYPE_* code and value from tcpdump.org,
         *      as per the above;
         *
         *      add, in their version of libpcap, an entry to map
         *      those DLT_* codes to the corresponding LINKTYPE_*
         *      code;
         *
         *      redefine, in their "net/bpf.h", any DLT_* values
         *      that collide with the values used by their additional
         *      DLT_* codes, to remove those collisions (but without
         *      making them collide with any of the LINKTYPE_*
         *      values equal to 50 or above; they should also avoid
         *      defining DLT_* values that collide with those
         *      LINKTYPE_* values, either).
         */

        /* Juniper-internal chassis encapsulation */
        { DLT_JUNIPER_MONITOR,  LINKTYPE_JUNIPER_MONITOR },

        /* BACnet MS/TP */
        { DLT_BACNET_MS_TP,     LINKTYPE_BACNET_MS_TP },

        /* PPP for pppd, with direction flag in the PPP header */
        { DLT_PPP_PPPD,         LINKTYPE_PPP_PPPD},

        /* Juniper-internal chassis encapsulation */
        { DLT_JUNIPER_PPPOE,    LINKTYPE_JUNIPER_PPPOE },
        { DLT_JUNIPER_PPPOE_ATM,LINKTYPE_JUNIPER_PPPOE_ATM },

        /* GPRS LLC */
        { DLT_GPRS_LLC,         LINKTYPE_GPRS_LLC },

        /* Transparent Generic Framing Procedure (ITU-T G.7041/Y.1303) */
        { DLT_GPF_T,            LINKTYPE_GPF_T },

        /* Framed Generic Framing Procedure (ITU-T G.7041/Y.1303) */
        { DLT_GPF_F,            LINKTYPE_GPF_F },

        { DLT_GCOM_T1E1,        LINKTYPE_GCOM_T1E1 },
        { DLT_GCOM_SERIAL,      LINKTYPE_GCOM_SERIAL },

        /* Juniper-internal chassis encapsulation */
        { DLT_JUNIPER_PIC_PEER, LINKTYPE_JUNIPER_PIC_PEER },

        /* Endace types */
        { DLT_ERF_ETH,          LINKTYPE_ERF_ETH },
        { DLT_ERF_POS,          LINKTYPE_ERF_POS },

        /* viSDN LAPD */
        { DLT_LINUX_LAPD,       LINKTYPE_LINUX_LAPD },

        /* Juniper meta-information before Ether, PPP, Frame Relay, C-HDLC Frames */
        { DLT_JUNIPER_ETHER, LINKTYPE_JUNIPER_ETHER },
        { DLT_JUNIPER_PPP, LINKTYPE_JUNIPER_PPP },
        { DLT_JUNIPER_FRELAY, LINKTYPE_JUNIPER_FRELAY },
        { DLT_JUNIPER_CHDLC, LINKTYPE_JUNIPER_CHDLC },

        /* Multi Link Frame Relay (FRF.16) */
        { DLT_MFR,              LINKTYPE_MFR },

        /* Juniper Voice PIC */
        { DLT_JUNIPER_VP,       LINKTYPE_JUNIPER_VP },

        /* Controller Area Network (CAN) v2.0B */
        { DLT_A429,             LINKTYPE_A429 },

        /* Arinc 653 Interpartition Communication messages */
        { DLT_A653_ICM,         LINKTYPE_A653_ICM },

        /* USB */
        { DLT_USB,              LINKTYPE_USB },

        /* Bluetooth HCI UART transport layer */
        { DLT_BLUETOOTH_HCI_H4, LINKTYPE_BLUETOOTH_HCI_H4 },

        /* IEEE 802.16 MAC Common Part Sublayer */
        { DLT_IEEE802_16_MAC_CPS,       LINKTYPE_IEEE802_16_MAC_CPS },

        /* USB with Linux header */
        { DLT_USB_LINUX,        LINKTYPE_USB_LINUX },

        /* Controller Area Network (CAN) v2.0B */
        { DLT_CAN20B,           LINKTYPE_CAN20B },

        /* IEEE 802.15.4 with address fields padded */
        { DLT_IEEE802_15_4_LINUX,       LINKTYPE_IEEE802_15_4_LINUX },

        /* Per Packet Information encapsulated packets */
        { DLT_PPI,                      LINKTYPE_PPI },

        /* IEEE 802.16 MAC Common Part Sublayer plus radiotap header */
        { DLT_IEEE802_16_MAC_CPS_RADIO, LINKTYPE_IEEE802_16_MAC_CPS_RADIO },

        /* Juniper Voice ISM */
        { DLT_JUNIPER_ISM,      LINKTYPE_JUNIPER_ISM },

        /* IEEE 802.15.4 exactly as it appears in the spec */
        { DLT_IEEE802_15_4,     LINKTYPE_IEEE802_15_4 },

        /* Various link-layer types for SITA */
        { DLT_SITA,             LINKTYPE_SITA },

        /* Various link-layer types for Endace */
        { DLT_ERF,              LINKTYPE_ERF },

        /* Special header for u10 Networks boards */
        { DLT_RAIF1,            LINKTYPE_RAIF1 },

        /* IPMB */
        { DLT_IPMB,             LINKTYPE_IPMB },

        { -1,                   -1 }
};

static int
dlt_to_linktype(int dlt)
{
        int i;

        for (i = 0; map[i].dlt != -1; i++) {
                if (map[i].dlt == dlt)
                        return (map[i].linktype);
        }

        /*
         * If we don't have a mapping for this DLT_ code, return an
         * error; that means that the table above needs to have an
         * entry added.
         */
        return (-1);
}

static int
linktype_to_dlt(int linktype)
{
        int i;

        for (i = 0; map[i].linktype != -1; i++) {
                if (map[i].linktype == linktype)
                        return (map[i].dlt);
        }

        /*
         * If we don't have an entry for this link type, return
         * the link type value; it may be a DLT_ value from an
         * older version of libpcap.
         */
        return linktype;
}

static int
sf_write_header(FILE *fp, int linktype, int thiszone, int snaplen)
{
        struct pcap_file_header hdr;

        hdr.magic = TCPDUMP_MAGIC;
        hdr.version_major = PCAP_VERSION_MAJOR;
        hdr.version_minor = PCAP_VERSION_MINOR;

        hdr.thiszone = thiszone;
        hdr.snaplen = snaplen;
        hdr.sigfigs = 0;
        hdr.linktype = linktype;

        if (fwrite((char *)&hdr, sizeof(hdr), 1, fp) != 1)
                return (-1);

        return (0);
}

static void
swap_hdr(struct pcap_file_header *hp)
{
        hp->version_major = SWAPSHORT(hp->version_major);
        hp->version_minor = SWAPSHORT(hp->version_minor);
        hp->thiszone = SWAPLONG(hp->thiszone);
        hp->sigfigs = SWAPLONG(hp->sigfigs);
        hp->snaplen = SWAPLONG(hp->snaplen);
        hp->linktype = SWAPLONG(hp->linktype);
}

static int
sf_getnonblock(pcap_t *p, char *errbuf)
{
        /*
         * This is a savefile, not a live capture file, so never say
         * it's in non-blocking mode.
         */
        return (0);
}

static int
sf_setnonblock(pcap_t *p, int nonblock, char *errbuf)
{
        /*
         * This is a savefile, not a live capture file, so ignore
         * requests to put it in non-blocking mode.
         */
        return (0);
}

static int
sf_stats(pcap_t *p, struct pcap_stat *ps)
{
        snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
            "Statistics aren't available from savefiles");
        return (-1);
}

static int
sf_inject(pcap_t *p, const void *buf _U_, size_t size _U_)
{
        strlcpy(p->errbuf, "Sending packets isn't supported on savefiles",
            PCAP_ERRBUF_SIZE);
        return (-1);
}

/*
 * Set direction flag: Which packets do we accept on a forwarding
 * single device? IN, OUT or both?
 */
static int
sf_setdirection(pcap_t *p, pcap_direction_t d)
{
        snprintf(p->errbuf, sizeof(p->errbuf),
            "Setting direction is not supported on savefiles");
        return (-1);
}

static void
sf_close(pcap_t *p)
{
        if (p->sf.rfile != stdin)
                (void)fclose(p->sf.rfile);
        if (p->sf.base != NULL)
                free(p->sf.base);
}

pcap_t *
pcap_open_offline(const char *fname, char *errbuf)
{
        FILE *fp;
        pcap_t *p;

        if (fname[0] == '-' && fname[1] == '\0')
        {
                fp = stdin;
#if defined(WIN32) || defined(MSDOS)
                /*
                 * We're reading from the standard input, so put it in binary
                 * mode, as savefiles are binary files.
                 */
                SET_BINMODE(fp);
#endif
        }
        else {
#if !defined(WIN32) && !defined(MSDOS)
                fp = fopen(fname, "r");
#else
                fp = fopen(fname, "rb");
#endif
                if (fp == NULL) {
                        snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", fname,
                            pcap_strerror(errno));
                        return (NULL);
                }
        }
        p = pcap_fopen_offline(fp, errbuf);
        if (p == NULL) {
                if (fp != stdin)
                        fclose(fp);
        }
        return (p);
}

pcap_t *
pcap_fopen_offline(FILE *fp, char *errbuf)
{
        register pcap_t *p;
        struct pcap_file_header hdr;
        size_t amt_read;
        bpf_u_int32 magic;
        int linklen;

        p = (pcap_t *)malloc(sizeof(*p));
        if (p == NULL) {
                strlcpy(errbuf, "out of swap", PCAP_ERRBUF_SIZE);
                return (NULL);
        }

        memset((char *)p, 0, sizeof(*p));

        amt_read = fread((char *)&hdr, 1, sizeof(hdr), fp);
        if (amt_read != sizeof(hdr)) {
                if (ferror(fp)) {
                        snprintf(errbuf, PCAP_ERRBUF_SIZE,
                            "error reading dump file: %s",
                            pcap_strerror(errno));
                } else {
                        snprintf(errbuf, PCAP_ERRBUF_SIZE,
                            "truncated dump file; tried to read %lu file header bytes, only got %lu",
                            (unsigned long)sizeof(hdr),
                            (unsigned long)amt_read);
                }
                goto bad;
        }
        magic = hdr.magic;
        if (magic != TCPDUMP_MAGIC && magic != KUZNETZOV_TCPDUMP_MAGIC) {
                magic = SWAPLONG(magic);
                if (magic != TCPDUMP_MAGIC && magic != KUZNETZOV_TCPDUMP_MAGIC) {
                        snprintf(errbuf, PCAP_ERRBUF_SIZE,
                            "bad dump file format");
                        goto bad;
                }
                p->sf.swapped = 1;
                swap_hdr(&hdr);
        }
        if (magic == KUZNETZOV_TCPDUMP_MAGIC) {
                /*
                 * XXX - the patch that's in some versions of libpcap
                 * changes the packet header but not the magic number,
                 * and some other versions with this magic number have
                 * some extra debugging information in the packet header;
                 * we'd have to use some hacks^H^H^H^H^Hheuristics to
                 * detect those variants.
                 *
                 * Ethereal does that, but it does so by trying to read
                 * the first two packets of the file with each of the
                 * record header formats.  That currently means it seeks
                 * backwards and retries the reads, which doesn't work
                 * on pipes.  We want to be able to read from a pipe, so
                 * that strategy won't work; we'd have to buffer some
                 * data ourselves and read from that buffer in order to
                 * make that work.
                 */
                p->sf.hdrsize = sizeof(struct pcap_sf_patched_pkthdr);
        } else
                p->sf.hdrsize = sizeof(struct pcap_sf_pkthdr);
        if (hdr.version_major < PCAP_VERSION_MAJOR) {
                snprintf(errbuf, PCAP_ERRBUF_SIZE, "archaic file format");
                goto bad;
        }
        p->tzoff = hdr.thiszone;
        p->snapshot = hdr.snaplen;
        p->linktype = linktype_to_dlt(hdr.linktype);
        if (magic == KUZNETZOV_TCPDUMP_MAGIC && p->linktype == DLT_EN10MB) {
                /*
                 * This capture might have been done in raw mode or cooked
                 * mode.
                 *
                 * If it was done in cooked mode, p->snapshot was passed
                 * to recvfrom() as the buffer size, meaning that the
                 * most packet data that would be copied would be
                 * p->snapshot.  However, a faked Ethernet header would
                 * then have been added to it, so the most data that would
                 * be in a packet in the file would be p->snapshot + 14.
                 *
                 * We can't easily tell whether the capture was done in
                 * raw mode or cooked mode, so we'll assume it was
                 * cooked mode, and add 14 to the snapshot length.  That
                 * means that, for a raw capture, the snapshot length will
                 * be misleading if you use it to figure out why a capture
                 * doesn't have all the packet data, but there's not much
                 * we can do to avoid that.
                 */
                p->snapshot += 14;
        }
        p->sf.rfile = fp;
#ifndef WIN32
        p->bufsize = hdr.snaplen;
#else
        /* Allocate the space for pcap_pkthdr as well. It will be used by pcap_read_ex */
        p->bufsize = hdr.snaplen+sizeof(struct pcap_pkthdr);
#endif

        /* Align link header as required for proper data alignment */
        /* XXX should handle all types */
        switch (p->linktype) {

        case DLT_EN10MB:
                linklen = 14;
                break;

        case DLT_FDDI:
                linklen = 13 + 8;       /* fddi_header + llc */
                break;

        case DLT_NULL:
        default:
                linklen = 0;
                break;
        }

        if (p->bufsize < 0)
                p->bufsize = BPF_MAXBUFSIZE;
        p->sf.base = (u_char *)malloc(p->bufsize + BPF_ALIGNMENT);
        if (p->sf.base == NULL) {
                strlcpy(errbuf, "out of swap", PCAP_ERRBUF_SIZE);
                goto bad;
        }
        p->buffer = p->sf.base + BPF_ALIGNMENT - (linklen % BPF_ALIGNMENT);
        p->sf.version_major = hdr.version_major;
        p->sf.version_minor = hdr.version_minor;
#ifdef PCAP_FDDIPAD
        /* Padding only needed for live capture fcode */
        p->fddipad = 0;
#endif

        /*
         * We interchanged the caplen and len fields at version 2.3,
         * in order to match the bpf header layout.  But unfortunately
         * some files were written with version 2.3 in their headers
         * but without the interchanged fields.
         *
         * In addition, DG/UX tcpdump writes out files with a version
         * number of 543.0, and with the caplen and len fields in the
         * pre-2.3 order.
         */
        switch (hdr.version_major) {

        case 2:
                if (hdr.version_minor < 3)
                        p->sf.lengths_swapped = SWAPPED;
                else if (hdr.version_minor == 3)
                        p->sf.lengths_swapped = MAYBE_SWAPPED;
                else
                        p->sf.lengths_swapped = NOT_SWAPPED;
                break;

        case 543:
                p->sf.lengths_swapped = SWAPPED;
                break;

        default:
                p->sf.lengths_swapped = NOT_SWAPPED;
                break;
        }

#if !defined(WIN32) && !defined(MSDOS)
        /*
         * You can do "select()" and "poll()" on plain files on most
         * platforms, and should be able to do so on pipes.
         *
         * You can't do "select()" on anything other than sockets in
         * Windows, so, on Win32 systems, we don't have "selectable_fd".
         */
        p->selectable_fd = fileno(fp);
#endif

        p->read_op = pcap_offline_read;
        p->inject_op = sf_inject;
        p->setfilter_op = install_bpf_program;
        p->setdirection_op = sf_setdirection;
        p->set_datalink_op = NULL;      /* we don't support munging link-layer headers */
        p->getnonblock_op = sf_getnonblock;
        p->setnonblock_op = sf_setnonblock;
        p->stats_op = sf_stats;
        p->close_op = sf_close;

        return (p);
 bad:
        free(p);
        return (NULL);
}

/*
 * Read sf_readfile and return the next packet.  Return the header in hdr
 * and the contents in buf.  Return 0 on success, SFERR_EOF if there were
 * no more packets, and SFERR_TRUNC if a partial packet was encountered.
 */
static int
sf_next_packet(pcap_t *p, struct pcap_pkthdr *hdr, u_char *buf, u_int buflen)
{
        struct pcap_sf_patched_pkthdr sf_hdr;
        FILE *fp = p->sf.rfile;
        size_t amt_read;
        bpf_u_int32 t;

        /*
         * Read the packet header; the structure we use as a buffer
         * is the longer structure for files generated by the patched
         * libpcap, but if the file has the magic number for an
         * unpatched libpcap we only read as many bytes as the regular
         * header has.
         */
        amt_read = fread(&sf_hdr, 1, p->sf.hdrsize, fp);
        if (amt_read != p->sf.hdrsize) {
                if (ferror(fp)) {
                        snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                            "error reading dump file: %s",
                            pcap_strerror(errno));
                        return (-1);
                } else {
                        if (amt_read != 0) {
                                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                                    "truncated dump file; tried to read %d header bytes, only got %lu",
                                    p->sf.hdrsize, (unsigned long)amt_read);
                                return (-1);
                        }
                        /* EOF */
                        return (1);
                }
        }

        if (p->sf.swapped) {
                /* these were written in opposite byte order */
                hdr->caplen = SWAPLONG(sf_hdr.caplen);
                hdr->len = SWAPLONG(sf_hdr.len);
                hdr->ts.tv_sec = SWAPLONG(sf_hdr.ts.tv_sec);
                hdr->ts.tv_usec = SWAPLONG(sf_hdr.ts.tv_usec);
        } else {
                hdr->caplen = sf_hdr.caplen;
                hdr->len = sf_hdr.len;
                hdr->ts.tv_sec = sf_hdr.ts.tv_sec;
                hdr->ts.tv_usec = sf_hdr.ts.tv_usec;
        }
        /* Swap the caplen and len fields, if necessary. */
        switch (p->sf.lengths_swapped) {

        case NOT_SWAPPED:
                break;

        case MAYBE_SWAPPED:
                if (hdr->caplen <= hdr->len) {
                        /*
                         * The captured length is <= the actual length,
                         * so presumably they weren't swapped.
                         */
                        break;
                }
                /* FALLTHROUGH */

        case SWAPPED:
                t = hdr->caplen;
                hdr->caplen = hdr->len;
                hdr->len = t;
                break;
        }

        if (hdr->caplen > buflen) {
                /*
                 * This can happen due to Solaris 2.3 systems tripping
                 * over the BUFMOD problem and not setting the snapshot
                 * correctly in the savefile header.  If the caplen isn't
                 * grossly wrong, try to salvage.
                 */
                static u_char *tp = NULL;
                static size_t tsize = 0;

                if (hdr->caplen > 65535) {
                        snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                            "bogus savefile header");
                        return (-1);
                }

                if (tsize < hdr->caplen) {
                        tsize = ((hdr->caplen + 1023) / 1024) * 1024;
                        if (tp != NULL)
                                free((u_char *)tp);
                        tp = (u_char *)malloc(tsize);
                        if (tp == NULL) {
                                tsize = 0;
                                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                                    "BUFMOD hack malloc");
                                return (-1);
                        }
                }
                amt_read = fread((char *)tp, 1, hdr->caplen, fp);
                if (amt_read != hdr->caplen) {
                        if (ferror(fp)) {
                                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                                    "error reading dump file: %s",
                                    pcap_strerror(errno));
                        } else {
                                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                                    "truncated dump file; tried to read %u captured bytes, only got %lu",
                                    hdr->caplen, (unsigned long)amt_read);
                        }
                        return (-1);
                }
                /*
                 * We can only keep up to buflen bytes.  Since caplen > buflen
                 * is exactly how we got here, we know we can only keep the
                 * first buflen bytes and must drop the remainder.  Adjust
                 * caplen accordingly, so we don't get confused later as
                 * to how many bytes we have to play with.
                 */
                hdr->caplen = buflen;
                memcpy((char *)buf, (char *)tp, buflen);

        } else {
                /* read the packet itself */
                amt_read = fread((char *)buf, 1, hdr->caplen, fp);
                if (amt_read != hdr->caplen) {
                        if (ferror(fp)) {
                                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                                    "error reading dump file: %s",
                                    pcap_strerror(errno));
                        } else {
                                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                                    "truncated dump file; tried to read %u captured bytes, only got %lu",
                                    hdr->caplen, (unsigned long)amt_read);
                        }
                        return (-1);
                }
        }
        return (0);
}

/*
 * Print out packets stored in the file initialized by sf_read_init().
 * If cnt > 0, return after 'cnt' packets, otherwise continue until eof.
 */
int
pcap_offline_read(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
{
        struct bpf_insn *fcode;
        int status = 0;
        int n = 0;

        while (status == 0) {
                struct pcap_pkthdr h;

                /*
                 * Has "pcap_breakloop()" been called?
                 * If so, return immediately - if we haven't read any
                 * packets, clear the flag and return -2 to indicate
                 * that we were told to break out of the loop, otherwise
                 * leave the flag set, so that the *next* call will break
                 * out of the loop without having read any packets, and
                 * return the number of packets we've processed so far.
                 */
                if (p->break_loop) {
                        if (n == 0) {
                                p->break_loop = 0;
                                return (-2);
                        } else
                                return (n);
                }

                status = sf_next_packet(p, &h, p->buffer, p->bufsize);
                if (status) {
                        if (status == 1)
                                return (0);
                        return (status);
                }

                if ((fcode = p->fcode.bf_insns) == NULL ||
                    bpf_filter(fcode, p->buffer, h.len, h.caplen)) {
                        (*callback)(user, &h, p->buffer);
                        if (++n >= cnt && cnt > 0)
                                break;
                }
        }
        /*XXX this breaks semantics tcpslice expects */
        return (n);
}

/*
 * Output a packet to the initialized dump file.
 */
void
pcap_dump(u_char *user, const struct pcap_pkthdr *h, const u_char *sp)
{
        register FILE *f;
        struct pcap_sf_pkthdr sf_hdr;

        f = (FILE *)user;
        sf_hdr.ts.tv_sec  = h->ts.tv_sec;
        sf_hdr.ts.tv_usec = h->ts.tv_usec;
        sf_hdr.caplen     = h->caplen;
        sf_hdr.len        = h->len;
        /* XXX we should check the return status */
        (void)fwrite(&sf_hdr, sizeof(sf_hdr), 1, f);
        (void)fwrite(sp, h->caplen, 1, f);
}

static pcap_dumper_t *
pcap_setup_dump(pcap_t *p, int linktype, FILE *f, const char *fname)
{

#if defined(WIN32) || defined(MSDOS)
        /*
         * If we're writing to the standard output, put it in binary
         * mode, as savefiles are binary files.
         *
         * Otherwise, we turn off buffering.
         * XXX - why?  And why not on the standard output?
         */
        if (f == stdout)
                SET_BINMODE(f);
        else
                setbuf(f, NULL);
#endif
        if (sf_write_header(f, linktype, p->tzoff, p->snapshot) == -1) {
                snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "Can't write to %s: %s",
                    fname, pcap_strerror(errno));
                if (f != stdout)
                        (void)fclose(f);
                return (NULL);
        }
        return ((pcap_dumper_t *)f);
}

/*
 * Initialize so that sf_write() will output to the file named 'fname'.
 */
pcap_dumper_t *
pcap_dump_open(pcap_t *p, const char *fname)
{
        FILE *f;
        int linktype;

        linktype = dlt_to_linktype(p->linktype);
        if (linktype == -1) {
                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                    "%s: link-layer type %d isn't supported in savefiles",
                    fname, linktype);
                return (NULL);
        }

        if (fname[0] == '-' && fname[1] == '\0') {
                f = stdout;
                fname = "standard output";
        } else {
#if !defined(WIN32) && !defined(MSDOS)
                f = fopen(fname, "w");
#else
                f = fopen(fname, "wb");
#endif
                if (f == NULL) {
                        snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s",
                            fname, pcap_strerror(errno));
                        return (NULL);
                }
        }
        return (pcap_setup_dump(p, linktype, f, fname));
}

/*
 * Initialize so that sf_write() will output to the given stream.
 */
pcap_dumper_t *
pcap_dump_fopen(pcap_t *p, FILE *f)
{       
        int linktype;

        linktype = dlt_to_linktype(p->linktype);
        if (linktype == -1) {
                snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
                    "stream: link-layer type %d isn't supported in savefiles",
                    linktype);
                return (NULL);
        }

        return (pcap_setup_dump(p, linktype, f, "stream"));
}

FILE *
pcap_dump_file(pcap_dumper_t *p)
{
        return ((FILE *)p);
}

long
pcap_dump_ftell(pcap_dumper_t *p)
{
        return (ftell((FILE *)p));
}

int
pcap_dump_flush(pcap_dumper_t *p)
{

        if (fflush((FILE *)p) == EOF)
                return (-1);
        else
                return (0);
}

void
pcap_dump_close(pcap_dumper_t *p)
{

#ifdef notyet
        if (ferror((FILE *)p))
                return-an-error;
        /* XXX should check return from fclose() too */
#endif
        (void)fclose((FILE *)p);
}