2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
5 * This package is an SSL implementation written
6 * by Eric Young (eay@cryptsoft.com).
7 * The implementation was written so as to conform with Netscapes SSL.
9 * This library is free for commercial and non-commercial use as long as
10 * the following conditions are aheared to. The following conditions
11 * apply to all code found in this distribution, be it the RC4, RSA,
12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation
13 * included with this distribution is covered by the same copyright terms
14 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
16 * Copyright remains Eric Young's, and as such any Copyright notices in
17 * the code are not to be removed.
18 * If this package is used in a product, Eric Young should be given attribution
19 * as the author of the parts of the library used.
20 * This can be in the form of a textual message at program startup or
21 * in documentation (online or textual) provided with the package.
23 * Redistribution and use in source and binary forms, with or without
24 * modification, are permitted provided that the following conditions
26 * 1. Redistributions of source code must retain the copyright
27 * notice, this list of conditions and the following disclaimer.
28 * 2. Redistributions in binary form must reproduce the above copyright
29 * notice, this list of conditions and the following disclaimer in the
30 * documentation and/or other materials provided with the distribution.
31 * 3. All advertising materials mentioning features or use of this software
32 * must display the following acknowledgement:
33 * "This product includes cryptographic software written by
34 * Eric Young (eay@cryptsoft.com)"
35 * The word 'cryptographic' can be left out if the rouines from the library
36 * being used are not cryptographic related :-).
37 * 4. If you include any Windows specific code (or a derivative thereof) from
38 * the apps directory (application code) you must include an acknowledgement:
39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
53 * The licence and distribution terms for any publically available version or
54 * derivative of this code cannot be changed. i.e. this code cannot simply be
55 * copied and put under another distribution licence
56 * [including the GNU Public Licence.]
58 /* ====================================================================
59 * Copyright (c) 1998-2000 The OpenSSL Project. All rights reserved.
61 * Redistribution and use in source and binary forms, with or without
62 * modification, are permitted provided that the following conditions
65 * 1. Redistributions of source code must retain the above copyright
66 * notice, this list of conditions and the following disclaimer.
68 * 2. Redistributions in binary form must reproduce the above copyright
69 * notice, this list of conditions and the following disclaimer in
70 * the documentation and/or other materials provided with the
73 * 3. All advertising materials mentioning features or use of this
74 * software must display the following acknowledgment:
75 * "This product includes software developed by the OpenSSL Project
76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
79 * endorse or promote products derived from this software without
80 * prior written permission. For written permission, please contact
81 * openssl-core@openssl.org.
83 * 5. Products derived from this software may not be called "OpenSSL"
84 * nor may "OpenSSL" appear in their names without prior written
85 * permission of the OpenSSL Project.
87 * 6. Redistributions of any form whatsoever must retain the following
89 * "This product includes software developed by the OpenSSL Project
90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
103 * OF THE POSSIBILITY OF SUCH DAMAGE.
104 * ====================================================================
106 * This product includes cryptographic software written by Eric Young
107 * (eay@cryptsoft.com). This product includes software written by Tim
108 * Hudson (tjh@cryptsoft.com).
111 /* ====================================================================
112 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
113 * ECC cipher suite support in OpenSSL originally developed by
114 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
117 #define _BSD_SOURCE 1 /* Or gethostname won't be declared properly
118 on Linux and GNU platforms. */
131 #define _XOPEN_SOURCE 500 /* Or isascii won't be declared properly on
132 VMS (at least with DECompHP C). */
135 #include <openssl/bio.h>
136 #include <openssl/crypto.h>
137 #include <openssl/evp.h>
138 #include <openssl/x509.h>
139 #include <openssl/x509v3.h>
140 #include <openssl/ssl.h>
141 #ifndef OPENSSL_NO_ENGINE
142 #include <openssl/engine.h>
144 #include <openssl/err.h>
145 #include <openssl/rand.h>
146 #ifndef OPENSSL_NO_RSA
147 #include <openssl/rsa.h>
149 #ifndef OPENSSL_NO_DSA
150 #include <openssl/dsa.h>
152 #ifndef OPENSSL_NO_DH
153 #include <openssl/dh.h>
155 #include <openssl/bn.h>
157 #define _XOPEN_SOURCE_EXTENDED 1 /* Or gethostname won't be declared properly
158 on Compaq platforms (at least with DEC C).
159 Do not try to put it earlier, or IPv6 includes
163 #ifdef OPENSSL_SYS_WINDOWS
166 #include OPENSSL_UNISTD
169 #ifdef OPENSSL_SYS_VMS
170 # define TEST_SERVER_CERT "SYS$DISK:[-.APPS]SERVER.PEM"
171 # define TEST_CLIENT_CERT "SYS$DISK:[-.APPS]CLIENT.PEM"
172 #elif defined(OPENSSL_SYS_WINCE)
173 # define TEST_SERVER_CERT "\\OpenSSL\\server.pem"
174 # define TEST_CLIENT_CERT "\\OpenSSL\\client.pem"
175 #elif defined(OPENSSL_SYS_NETWARE)
176 # define TEST_SERVER_CERT "\\openssl\\apps\\server.pem"
177 # define TEST_CLIENT_CERT "\\openssl\\apps\\client.pem"
179 # define TEST_SERVER_CERT "../apps/server.pem"
180 # define TEST_CLIENT_CERT "../apps/client.pem"
183 /* There is really no standard for this, so let's assign some tentative
184 numbers. In any case, these numbers are only for this test */
188 static int MS_CALLBACK
verify_callback(int ok
, X509_STORE_CTX
*ctx
);
189 #ifndef OPENSSL_NO_RSA
190 static RSA MS_CALLBACK
*tmp_rsa_cb(SSL
*s
, int is_export
,int keylength
);
191 static void free_tmp_rsa(void);
193 static int MS_CALLBACK
app_verify_callback(X509_STORE_CTX
*ctx
, void *arg
);
194 #define APP_CALLBACK_STRING "Test Callback Argument"
195 struct app_verify_arg
199 int allow_proxy_certs
;
204 #ifndef OPENSSL_NO_DH
205 static DH
*get_dh512(void);
206 static DH
*get_dh1024(void);
207 static DH
*get_dh1024dsa(void);
210 static BIO
*bio_err
=NULL
;
211 static BIO
*bio_stdout
=NULL
;
213 static char *cipher
=NULL
;
214 static int verbose
=0;
223 static const char rnd_seed
[] = "string to make the random number generator think it has entropy";
225 int doit_biopair(SSL
*s_ssl
,SSL
*c_ssl
,long bytes
,clock_t *s_time
,clock_t *c_time
);
226 int doit(SSL
*s_ssl
,SSL
*c_ssl
,long bytes
);
227 static int do_test_cipherlist(void);
228 static void sv_usage(void)
230 fprintf(stderr
,"usage: ssltest [args ...]\n");
231 fprintf(stderr
,"\n");
232 fprintf(stderr
," -server_auth - check server certificate\n");
233 fprintf(stderr
," -client_auth - do client authentication\n");
234 fprintf(stderr
," -proxy - allow proxy certificates\n");
235 fprintf(stderr
," -proxy_auth <val> - set proxy policy rights\n");
236 fprintf(stderr
," -proxy_cond <val> - experssion to test proxy policy rights\n");
237 fprintf(stderr
," -v - more output\n");
238 fprintf(stderr
," -d - debug output\n");
239 fprintf(stderr
," -reuse - use session-id reuse\n");
240 fprintf(stderr
," -num <val> - number of connections to perform\n");
241 fprintf(stderr
," -bytes <val> - number of bytes to swap between client/server\n");
242 #ifndef OPENSSL_NO_DH
243 fprintf(stderr
," -dhe1024 - use 1024 bit key (safe prime) for DHE\n");
244 fprintf(stderr
," -dhe1024dsa - use 1024 bit key (with 160-bit subprime) for DHE\n");
245 fprintf(stderr
," -no_dhe - disable DHE\n");
247 #ifndef OPENSSL_NO_ECDH
248 fprintf(stderr
," -no_ecdhe - disable ECDHE\n");
250 #ifndef OPENSSL_NO_SSL2
251 fprintf(stderr
," -ssl2 - use SSLv2\n");
253 #ifndef OPENSSL_NO_SSL3
254 fprintf(stderr
," -ssl3 - use SSLv3\n");
256 #ifndef OPENSSL_NO_TLS1
257 fprintf(stderr
," -tls1 - use TLSv1\n");
259 fprintf(stderr
," -CApath arg - PEM format directory of CA's\n");
260 fprintf(stderr
," -CAfile arg - PEM format file of CA's\n");
261 fprintf(stderr
," -cert arg - Server certificate file\n");
262 fprintf(stderr
," -key arg - Server key file (default: same as -cert)\n");
263 fprintf(stderr
," -c_cert arg - Client certificate file\n");
264 fprintf(stderr
," -c_key arg - Client key file (default: same as -c_cert)\n");
265 fprintf(stderr
," -cipher arg - The cipher list\n");
266 fprintf(stderr
," -bio_pair - Use BIO pairs\n");
267 fprintf(stderr
," -f - Test even cases that can't work\n");
268 fprintf(stderr
," -time - measure processor time used by client and server\n");
269 fprintf(stderr
," -zlib - use zlib compression\n");
270 fprintf(stderr
," -rle - use rle compression\n");
271 #ifndef OPENSSL_NO_ECDH
272 fprintf(stderr
," -named_curve arg - Elliptic curve name to use for ephemeral ECDH keys.\n" \
273 " Use \"openssl ecparam -list_curves\" for all names\n" \
274 " (default is sect163r2).\n");
276 fprintf(stderr
," -test_cipherlist - verifies the order of the ssl cipher lists\n");
279 static void print_details(SSL
*c_ssl
, const char *prefix
)
284 ciph
=SSL_get_current_cipher(c_ssl
);
285 BIO_printf(bio_stdout
,"%s%s, cipher %s %s",
287 SSL_get_version(c_ssl
),
288 SSL_CIPHER_get_version(ciph
),
289 SSL_CIPHER_get_name(ciph
));
290 cert
=SSL_get_peer_certificate(c_ssl
);
293 EVP_PKEY
*pkey
= X509_get_pubkey(cert
);
298 #ifndef OPENSSL_NO_RSA
299 else if (pkey
->type
== EVP_PKEY_RSA
&& pkey
->pkey
.rsa
!= NULL
300 && pkey
->pkey
.rsa
->n
!= NULL
)
302 BIO_printf(bio_stdout
, ", %d bit RSA",
303 BN_num_bits(pkey
->pkey
.rsa
->n
));
306 #ifndef OPENSSL_NO_DSA
307 else if (pkey
->type
== EVP_PKEY_DSA
&& pkey
->pkey
.dsa
!= NULL
308 && pkey
->pkey
.dsa
->p
!= NULL
)
310 BIO_printf(bio_stdout
, ", %d bit DSA",
311 BN_num_bits(pkey
->pkey
.dsa
->p
));
318 /* The SSL API does not allow us to look at temporary RSA/DH keys,
319 * otherwise we should print their lengths too */
320 BIO_printf(bio_stdout
,"\n");
323 static void lock_dbg_cb(int mode
, int type
, const char *file
, int line
)
325 static int modes
[CRYPTO_NUM_LOCKS
]; /* = {0, 0, ... } */
326 const char *errstr
= NULL
;
329 rw
= mode
& (CRYPTO_READ
|CRYPTO_WRITE
);
330 if (!((rw
== CRYPTO_READ
) || (rw
== CRYPTO_WRITE
)))
332 errstr
= "invalid mode";
336 if (type
< 0 || type
>= CRYPTO_NUM_LOCKS
)
338 errstr
= "type out of bounds";
342 if (mode
& CRYPTO_LOCK
)
346 errstr
= "already locked";
347 /* must not happen in a single-threaded program
348 * (would deadlock) */
354 else if (mode
& CRYPTO_UNLOCK
)
358 errstr
= "not locked";
362 if (modes
[type
] != rw
)
364 errstr
= (rw
== CRYPTO_READ
) ?
365 "CRYPTO_r_unlock on write lock" :
366 "CRYPTO_w_unlock on read lock";
373 errstr
= "invalid mode";
380 /* we cannot use bio_err here */
381 fprintf(stderr
, "openssl (lock_dbg_cb): %s (mode=%d, type=%d) at %s:%d\n",
382 errstr
, mode
, type
, file
, line
);
387 int main(int argc
, char *argv
[])
389 char *CApath
=NULL
,*CAfile
=NULL
;
393 int tls1
=0,ssl2
=0,ssl3
=0,ret
=1;
396 struct app_verify_arg app_verify_arg
=
397 { APP_CALLBACK_STRING
, 0, 0, NULL
, NULL
};
398 char *server_cert
=TEST_SERVER_CERT
;
399 char *server_key
=NULL
;
400 char *client_cert
=TEST_CLIENT_CERT
;
401 char *client_key
=NULL
;
402 #ifndef OPENSSL_NO_ECDH
403 char *named_curve
= NULL
;
407 SSL_METHOD
*meth
=NULL
;
409 int number
=1,reuse
=0;
411 #ifndef OPENSSL_NO_DH
413 int dhe1024
= 0, dhe1024dsa
= 0;
415 #ifndef OPENSSL_NO_ECDH
421 clock_t s_time
= 0, c_time
= 0;
423 #ifndef OPENSSL_NO_COMP
424 COMP_METHOD
*cm
= NULL
;
426 STACK_OF(SSL_COMP
) *ssl_comp_methods
= NULL
;
427 int test_cipherlist
= 0;
433 bio_err
=BIO_new_fp(stderr
,BIO_NOCLOSE
);
435 CRYPTO_set_locking_callback(lock_dbg_cb
);
437 /* enable memory leak checking unless explicitly disabled */
438 if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL
) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off"))))
440 CRYPTO_malloc_debug_init();
441 CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL
);
445 /* OPENSSL_DEBUG_MEMORY=off */
446 CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
448 CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON
);
450 RAND_seed(rnd_seed
, sizeof rnd_seed
);
452 bio_stdout
=BIO_new_fp(stdout
,BIO_NOCLOSE
);
459 if (strcmp(*argv
,"-server_auth") == 0)
461 else if (strcmp(*argv
,"-client_auth") == 0)
463 else if (strcmp(*argv
,"-proxy_auth") == 0)
465 if (--argc
< 1) goto bad
;
466 app_verify_arg
.proxy_auth
= *(++argv
);
468 else if (strcmp(*argv
,"-proxy_cond") == 0)
470 if (--argc
< 1) goto bad
;
471 app_verify_arg
.proxy_cond
= *(++argv
);
473 else if (strcmp(*argv
,"-v") == 0)
475 else if (strcmp(*argv
,"-d") == 0)
477 else if (strcmp(*argv
,"-reuse") == 0)
479 else if (strcmp(*argv
,"-dhe1024") == 0)
481 #ifndef OPENSSL_NO_DH
484 fprintf(stderr
,"ignoring -dhe1024, since I'm compiled without DH\n");
487 else if (strcmp(*argv
,"-dhe1024dsa") == 0)
489 #ifndef OPENSSL_NO_DH
492 fprintf(stderr
,"ignoring -dhe1024, since I'm compiled without DH\n");
495 else if (strcmp(*argv
,"-no_dhe") == 0)
497 else if (strcmp(*argv
,"-no_ecdhe") == 0)
499 else if (strcmp(*argv
,"-ssl2") == 0)
501 else if (strcmp(*argv
,"-tls1") == 0)
503 else if (strcmp(*argv
,"-ssl3") == 0)
505 else if (strncmp(*argv
,"-num",4) == 0)
507 if (--argc
< 1) goto bad
;
508 number
= atoi(*(++argv
));
509 if (number
== 0) number
=1;
511 else if (strcmp(*argv
,"-bytes") == 0)
513 if (--argc
< 1) goto bad
;
514 bytes
= atol(*(++argv
));
515 if (bytes
== 0L) bytes
=1L;
517 if (argv
[0][i
-1] == 'k') bytes
*=1024L;
518 if (argv
[0][i
-1] == 'm') bytes
*=1024L*1024L;
520 else if (strcmp(*argv
,"-cert") == 0)
522 if (--argc
< 1) goto bad
;
523 server_cert
= *(++argv
);
525 else if (strcmp(*argv
,"-s_cert") == 0)
527 if (--argc
< 1) goto bad
;
528 server_cert
= *(++argv
);
530 else if (strcmp(*argv
,"-key") == 0)
532 if (--argc
< 1) goto bad
;
533 server_key
= *(++argv
);
535 else if (strcmp(*argv
,"-s_key") == 0)
537 if (--argc
< 1) goto bad
;
538 server_key
= *(++argv
);
540 else if (strcmp(*argv
,"-c_cert") == 0)
542 if (--argc
< 1) goto bad
;
543 client_cert
= *(++argv
);
545 else if (strcmp(*argv
,"-c_key") == 0)
547 if (--argc
< 1) goto bad
;
548 client_key
= *(++argv
);
550 else if (strcmp(*argv
,"-cipher") == 0)
552 if (--argc
< 1) goto bad
;
555 else if (strcmp(*argv
,"-CApath") == 0)
557 if (--argc
< 1) goto bad
;
560 else if (strcmp(*argv
,"-CAfile") == 0)
562 if (--argc
< 1) goto bad
;
565 else if (strcmp(*argv
,"-bio_pair") == 0)
569 else if (strcmp(*argv
,"-f") == 0)
573 else if (strcmp(*argv
,"-time") == 0)
577 else if (strcmp(*argv
,"-zlib") == 0)
581 else if (strcmp(*argv
,"-rle") == 0)
585 else if (strcmp(*argv
,"-named_curve") == 0)
587 if (--argc
< 1) goto bad
;
588 #ifndef OPENSSL_NO_ECDH
589 named_curve
= *(++argv
);
591 fprintf(stderr
,"ignoring -named_curve, since I'm compiled without ECDH\n");
595 else if (strcmp(*argv
,"-app_verify") == 0)
597 app_verify_arg
.app_verify
= 1;
599 else if (strcmp(*argv
,"-proxy") == 0)
601 app_verify_arg
.allow_proxy_certs
= 1;
603 else if (strcmp(*argv
,"-test_cipherlist") == 0)
609 fprintf(stderr
,"unknown option %s\n",*argv
);
623 if (test_cipherlist
== 1)
625 /* ensure that the cipher list are correctly sorted and exit */
626 if (do_test_cipherlist() == 0)
632 if (!ssl2
&& !ssl3
&& !tls1
&& number
> 1 && !reuse
&& !force
)
634 fprintf(stderr
, "This case cannot work. Use -f to perform "
635 "the test anyway (and\n-d to see what happens), "
636 "or add one of -ssl2, -ssl3, -tls1, -reuse\n"
637 "to avoid protocol mismatch.\n");
645 fprintf(stderr
, "Using BIO pair (-bio_pair)\n");
648 if (number
< 50 && !force
)
649 fprintf(stderr
, "Warning: For accurate timings, use more connections (e.g. -num 1000)\n");
652 /* if (cipher == NULL) cipher=getenv("SSL_CIPHER"); */
655 SSL_load_error_strings();
657 #ifndef OPENSSL_NO_COMP
658 if (comp
== COMP_ZLIB
) cm
= COMP_zlib();
659 if (comp
== COMP_RLE
) cm
= COMP_rle();
662 if (cm
->type
!= NID_undef
)
664 if (SSL_COMP_add_compression_method(comp
, cm
) != 0)
667 "Failed to add compression method\n");
668 ERR_print_errors_fp(stderr
);
674 "Warning: %s compression not supported\n",
675 (comp
== COMP_RLE
? "rle" :
676 (comp
== COMP_ZLIB
? "zlib" :
678 ERR_print_errors_fp(stderr
);
681 ssl_comp_methods
= SSL_COMP_get_compression_methods();
682 fprintf(stderr
, "Available compression methods:\n");
684 int j
, n
= sk_SSL_COMP_num(ssl_comp_methods
);
686 fprintf(stderr
, " NONE\n");
688 for (j
= 0; j
< n
; j
++)
690 SSL_COMP
*c
= sk_SSL_COMP_value(ssl_comp_methods
, j
);
691 fprintf(stderr
, " %d: %s\n", c
->id
, c
->name
);
696 #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3)
706 meth
=SSLv23_method();
708 #ifdef OPENSSL_NO_SSL2
715 c_ctx
=SSL_CTX_new(meth
);
716 s_ctx
=SSL_CTX_new(meth
);
717 if ((c_ctx
== NULL
) || (s_ctx
== NULL
))
719 ERR_print_errors(bio_err
);
725 SSL_CTX_set_cipher_list(c_ctx
,cipher
);
726 SSL_CTX_set_cipher_list(s_ctx
,cipher
);
729 #ifndef OPENSSL_NO_DH
734 /* use SSL_OP_SINGLE_DH_USE to avoid small subgroup attacks */
735 SSL_CTX_set_options(s_ctx
, SSL_OP_SINGLE_DH_USE
);
742 SSL_CTX_set_tmp_dh(s_ctx
,dh
);
749 #ifndef OPENSSL_NO_ECDH
754 if (named_curve
!= NULL
)
756 nid
= OBJ_sn2nid(named_curve
);
759 BIO_printf(bio_err
, "unknown curve name (%s)\n", named_curve
);
766 ecdh
= EC_KEY_new_by_curve_name(nid
);
769 BIO_printf(bio_err
, "unable to create curve\n");
773 SSL_CTX_set_tmp_ecdh(s_ctx
, ecdh
);
774 SSL_CTX_set_options(s_ctx
, SSL_OP_SINGLE_ECDH_USE
);
781 #ifndef OPENSSL_NO_RSA
782 SSL_CTX_set_tmp_rsa_callback(s_ctx
,tmp_rsa_cb
);
785 if (!SSL_CTX_use_certificate_file(s_ctx
,server_cert
,SSL_FILETYPE_PEM
))
787 ERR_print_errors(bio_err
);
789 else if (!SSL_CTX_use_PrivateKey_file(s_ctx
,
790 (server_key
?server_key
:server_cert
), SSL_FILETYPE_PEM
))
792 ERR_print_errors(bio_err
);
798 SSL_CTX_use_certificate_file(c_ctx
,client_cert
,
800 SSL_CTX_use_PrivateKey_file(c_ctx
,
801 (client_key
?client_key
:client_cert
),
805 if ( (!SSL_CTX_load_verify_locations(s_ctx
,CAfile
,CApath
)) ||
806 (!SSL_CTX_set_default_verify_paths(s_ctx
)) ||
807 (!SSL_CTX_load_verify_locations(c_ctx
,CAfile
,CApath
)) ||
808 (!SSL_CTX_set_default_verify_paths(c_ctx
)))
810 /* fprintf(stderr,"SSL_load_verify_locations\n"); */
811 ERR_print_errors(bio_err
);
817 BIO_printf(bio_err
,"client authentication\n");
818 SSL_CTX_set_verify(s_ctx
,
819 SSL_VERIFY_PEER
|SSL_VERIFY_FAIL_IF_NO_PEER_CERT
,
821 SSL_CTX_set_cert_verify_callback(s_ctx
, app_verify_callback
, &app_verify_arg
);
825 BIO_printf(bio_err
,"server authentication\n");
826 SSL_CTX_set_verify(c_ctx
,SSL_VERIFY_PEER
,
828 SSL_CTX_set_cert_verify_callback(c_ctx
, app_verify_callback
, &app_verify_arg
);
832 int session_id_context
= 0;
833 SSL_CTX_set_session_id_context(s_ctx
, (void *)&session_id_context
, sizeof session_id_context
);
836 c_ssl
=SSL_new(c_ctx
);
837 s_ssl
=SSL_new(s_ctx
);
839 #ifndef OPENSSL_NO_KRB5
840 if (c_ssl
&& c_ssl
->kssl_ctx
)
842 char localhost
[MAXHOSTNAMELEN
+2];
844 if (gethostname(localhost
, sizeof localhost
-1) == 0)
846 localhost
[sizeof localhost
-1]='\0';
847 if(strlen(localhost
) == sizeof localhost
-1)
849 BIO_printf(bio_err
,"localhost name too long\n");
852 kssl_ctx_setstring(c_ssl
->kssl_ctx
, KSSL_SERVER
,
856 #endif /* OPENSSL_NO_KRB5 */
858 for (i
=0; i
<number
; i
++)
860 if (!reuse
) SSL_set_session(c_ssl
,NULL
);
862 ret
=doit_biopair(s_ssl
,c_ssl
,bytes
,&s_time
,&c_time
);
864 ret
=doit(s_ssl
,c_ssl
,bytes
);
869 print_details(c_ssl
, "");
871 if ((number
> 1) || (bytes
> 1L))
872 BIO_printf(bio_stdout
, "%d handshakes of %ld bytes done\n",number
,bytes
);
875 #ifdef CLOCKS_PER_SEC
876 /* "To determine the time in seconds, the value returned
877 * by the clock function should be divided by the value
878 * of the macro CLOCKS_PER_SEC."
880 BIO_printf(bio_stdout
, "Approximate total server time: %6.2f s\n"
881 "Approximate total client time: %6.2f s\n",
882 (double)s_time
/CLOCKS_PER_SEC
,
883 (double)c_time
/CLOCKS_PER_SEC
);
885 /* "`CLOCKS_PER_SEC' undeclared (first use this function)"
886 * -- cc on NeXTstep/OpenStep */
887 BIO_printf(bio_stdout
,
888 "Approximate total server time: %6.2f units\n"
889 "Approximate total client time: %6.2f units\n",
899 if (s_ctx
!= NULL
) SSL_CTX_free(s_ctx
);
900 if (c_ctx
!= NULL
) SSL_CTX_free(c_ctx
);
902 if (bio_stdout
!= NULL
) BIO_free(bio_stdout
);
904 #ifndef OPENSSL_NO_RSA
907 #ifndef OPENSSL_NO_ENGINE
910 CRYPTO_cleanup_all_ex_data();
914 CRYPTO_mem_leaks(bio_err
);
915 if (bio_err
!= NULL
) BIO_free(bio_err
);
920 int doit_biopair(SSL
*s_ssl
, SSL
*c_ssl
, long count
,
921 clock_t *s_time
, clock_t *c_time
)
923 long cw_num
= count
, cr_num
= count
, sw_num
= count
, sr_num
= count
;
924 BIO
*s_ssl_bio
= NULL
, *c_ssl_bio
= NULL
;
925 BIO
*server
= NULL
, *server_io
= NULL
, *client
= NULL
, *client_io
= NULL
;
928 size_t bufsiz
= 256; /* small buffer for testing */
930 if (!BIO_new_bio_pair(&server
, bufsiz
, &server_io
, bufsiz
))
932 if (!BIO_new_bio_pair(&client
, bufsiz
, &client_io
, bufsiz
))
935 s_ssl_bio
= BIO_new(BIO_f_ssl());
939 c_ssl_bio
= BIO_new(BIO_f_ssl());
943 SSL_set_connect_state(c_ssl
);
944 SSL_set_bio(c_ssl
, client
, client
);
945 (void)BIO_set_ssl(c_ssl_bio
, c_ssl
, BIO_NOCLOSE
);
947 SSL_set_accept_state(s_ssl
);
948 SSL_set_bio(s_ssl
, server
, server
);
949 (void)BIO_set_ssl(s_ssl_bio
, s_ssl
, BIO_NOCLOSE
);
953 /* c_ssl_bio: SSL filter BIO
955 * client: pseudo-I/O for SSL library
957 * client_io: client's SSL communication; usually to be
958 * relayed over some I/O facility, but in this
959 * test program, we're the server, too:
961 * server_io: server's SSL communication
963 * server: pseudo-I/O for SSL library
965 * s_ssl_bio: SSL filter BIO
967 * The client and the server each employ a "BIO pair":
968 * client + client_io, server + server_io.
969 * BIO pairs are symmetric. A BIO pair behaves similar
970 * to a non-blocking socketpair (but both endpoints must
971 * be handled by the same thread).
972 * [Here we could connect client and server to the ends
973 * of a single BIO pair, but then this code would be less
974 * suitable as an example for BIO pairs in general.]
976 * Useful functions for querying the state of BIO pair endpoints:
978 * BIO_ctrl_pending(bio) number of bytes we can read now
979 * BIO_ctrl_get_read_request(bio) number of bytes needed to fulfil
980 * other side's read attempt
981 * BIO_ctrl_get_write_guarantee(bio) number of bytes we can write now
983 * ..._read_request is never more than ..._write_guarantee;
984 * it depends on the application which one you should use.
987 /* We have non-blocking behaviour throughout this test program, but
988 * can be sure that there is *some* progress in each iteration; so
989 * we don't have to worry about ..._SHOULD_READ or ..._SHOULD_WRITE
990 * -- we just try everything in each iteration
996 MS_STATIC
char cbuf
[1024*8];
998 clock_t c_clock
= clock();
1000 memset(cbuf
, 0, sizeof(cbuf
));
1003 if (SSL_in_init(c_ssl
))
1004 printf("client waiting in SSL_connect - %s\n",
1005 SSL_state_string_long(c_ssl
));
1009 /* Write to server. */
1011 if (cw_num
> (long)sizeof cbuf
)
1015 r
= BIO_write(c_ssl_bio
, cbuf
, i
);
1018 if (!BIO_should_retry(c_ssl_bio
))
1020 fprintf(stderr
,"ERROR in CLIENT\n");
1023 /* BIO_should_retry(...) can just be ignored here.
1024 * The library expects us to call BIO_write with
1025 * the same arguments again, and that's what we will
1026 * do in the next iteration. */
1030 fprintf(stderr
,"SSL CLIENT STARTUP FAILED\n");
1036 printf("client wrote %d\n", r
);
1043 /* Read from server. */
1045 r
= BIO_read(c_ssl_bio
, cbuf
, sizeof(cbuf
));
1048 if (!BIO_should_retry(c_ssl_bio
))
1050 fprintf(stderr
,"ERROR in CLIENT\n");
1053 /* Again, "BIO_should_retry" can be ignored. */
1057 fprintf(stderr
,"SSL CLIENT STARTUP FAILED\n");
1063 printf("client read %d\n", r
);
1068 /* c_time and s_time increments will typically be very small
1069 * (depending on machine speed and clock tick intervals),
1070 * but sampling over a large number of connections should
1071 * result in fairly accurate figures. We cannot guarantee
1072 * a lot, however -- if each connection lasts for exactly
1073 * one clock tick, it will be counted only for the client
1074 * or only for the server or even not at all.
1076 *c_time
+= (clock() - c_clock
);
1082 MS_STATIC
char sbuf
[1024*8];
1084 clock_t s_clock
= clock();
1086 memset(sbuf
, 0, sizeof(sbuf
));
1089 if (SSL_in_init(s_ssl
))
1090 printf("server waiting in SSL_accept - %s\n",
1091 SSL_state_string_long(s_ssl
));
1095 /* Write to client. */
1097 if (sw_num
> (long)sizeof sbuf
)
1101 r
= BIO_write(s_ssl_bio
, sbuf
, i
);
1104 if (!BIO_should_retry(s_ssl_bio
))
1106 fprintf(stderr
,"ERROR in SERVER\n");
1109 /* Ignore "BIO_should_retry". */
1113 fprintf(stderr
,"SSL SERVER STARTUP FAILED\n");
1119 printf("server wrote %d\n", r
);
1126 /* Read from client. */
1128 r
= BIO_read(s_ssl_bio
, sbuf
, sizeof(sbuf
));
1131 if (!BIO_should_retry(s_ssl_bio
))
1133 fprintf(stderr
,"ERROR in SERVER\n");
1140 fprintf(stderr
,"SSL SERVER STARTUP FAILED\n");
1146 printf("server read %d\n", r
);
1151 *s_time
+= (clock() - s_clock
);
1155 /* "I/O" BETWEEN CLIENT AND SERVER. */
1158 BIO
*io1
= server_io
, *io2
= client_io
;
1159 /* we use the non-copying interface for io1
1160 * and the standard BIO_write/BIO_read interface for io2
1163 static int prev_progress
= 1;
1172 r1
= BIO_ctrl_pending(io1
);
1173 r2
= BIO_ctrl_get_write_guarantee(io2
);
1182 if (INT_MAX
< num
) /* yeah, right */
1185 r
= BIO_nread(io1
, &dataptr
, (int)num
);
1187 assert(r
<= (int)num
);
1188 /* possibly r < num (non-contiguous data) */
1190 r
= BIO_write(io2
, dataptr
, (int)num
);
1191 if (r
!= (int)num
) /* can't happen */
1193 fprintf(stderr
, "ERROR: BIO_write could not write "
1194 "BIO_ctrl_get_write_guarantee() bytes");
1200 printf((io1
== client_io
) ?
1201 "C->S relaying: %d bytes\n" :
1202 "S->C relaying: %d bytes\n",
1213 r1
= BIO_ctrl_pending(io2
);
1214 r2
= BIO_ctrl_get_read_request(io1
);
1215 /* here we could use ..._get_write_guarantee instead of
1216 * ..._get_read_request, but by using the latter
1217 * we test restartability of the SSL implementation
1218 * more thoroughly */
1230 --num
; /* test restartability even more thoroughly */
1232 r
= BIO_nwrite0(io1
, &dataptr
);
1236 r
= BIO_read(io2
, dataptr
, (int)num
);
1237 if (r
!= (int)num
) /* can't happen */
1239 fprintf(stderr
, "ERROR: BIO_read could not read "
1240 "BIO_ctrl_pending() bytes");
1244 r
= BIO_nwrite(io1
, &dataptr
, (int)num
);
1245 if (r
!= (int)num
) /* can't happen */
1247 fprintf(stderr
, "ERROR: BIO_nwrite() did not accept "
1248 "BIO_nwrite0() bytes");
1253 printf((io2
== client_io
) ?
1254 "C->S relaying: %d bytes\n" :
1255 "S->C relaying: %d bytes\n",
1258 } /* no loop, BIO_ctrl_get_read_request now returns 0 anyway */
1260 if (!progress
&& !prev_progress
)
1261 if (cw_num
> 0 || cr_num
> 0 || sw_num
> 0 || sr_num
> 0)
1263 fprintf(stderr
, "ERROR: got stuck\n");
1264 if (strcmp("SSLv2", SSL_get_version(c_ssl
)) == 0)
1266 fprintf(stderr
, "This can happen for SSL2 because "
1267 "CLIENT-FINISHED and SERVER-VERIFY are written \n"
1268 "concurrently ...");
1269 if (strncmp("2SCF", SSL_state_string(c_ssl
), 4) == 0
1270 && strncmp("2SSV", SSL_state_string(s_ssl
), 4) == 0)
1272 fprintf(stderr
, " ok.\n");
1276 fprintf(stderr
, " ERROR.\n");
1279 prev_progress
= progress
;
1282 while (cw_num
> 0 || cr_num
> 0 || sw_num
> 0 || sr_num
> 0);
1285 print_details(c_ssl
, "DONE via BIO pair: ");
1290 ERR_print_errors(bio_err
);
1295 BIO_free(server_io
);
1299 BIO_free(client_io
);
1301 BIO_free(s_ssl_bio
);
1303 BIO_free(c_ssl_bio
);
1314 int doit(SSL
*s_ssl
, SSL
*c_ssl
, long count
)
1316 MS_STATIC
char cbuf
[1024*8],sbuf
[1024*8];
1317 long cw_num
=count
,cr_num
=count
;
1318 long sw_num
=count
,sr_num
=count
;
1324 int c_r
,c_w
,s_r
,s_w
;
1328 int c_write
,s_write
;
1329 int do_server
=0,do_client
=0;
1331 memset(cbuf
,0,sizeof(cbuf
));
1332 memset(sbuf
,0,sizeof(sbuf
));
1334 c_to_s
=BIO_new(BIO_s_mem());
1335 s_to_c
=BIO_new(BIO_s_mem());
1336 if ((s_to_c
== NULL
) || (c_to_s
== NULL
))
1338 ERR_print_errors(bio_err
);
1342 c_bio
=BIO_new(BIO_f_ssl());
1343 s_bio
=BIO_new(BIO_f_ssl());
1344 if ((c_bio
== NULL
) || (s_bio
== NULL
))
1346 ERR_print_errors(bio_err
);
1350 SSL_set_connect_state(c_ssl
);
1351 SSL_set_bio(c_ssl
,s_to_c
,c_to_s
);
1352 BIO_set_ssl(c_bio
,c_ssl
,BIO_NOCLOSE
);
1354 SSL_set_accept_state(s_ssl
);
1355 SSL_set_bio(s_ssl
,c_to_s
,s_to_c
);
1356 BIO_set_ssl(s_bio
,s_ssl
,BIO_NOCLOSE
);
1362 c_write
=1,s_write
=0;
1364 /* We can always do writes */
1370 i
=(int)BIO_pending(s_bio
);
1371 if ((i
&& s_r
) || s_w
) do_server
=1;
1373 i
=(int)BIO_pending(c_bio
);
1374 if ((i
&& c_r
) || c_w
) do_client
=1;
1376 if (do_server
&& debug
)
1378 if (SSL_in_init(s_ssl
))
1379 printf("server waiting in SSL_accept - %s\n",
1380 SSL_state_string_long(s_ssl
));
1381 /* else if (s_write)
1382 printf("server:SSL_write()\n");
1384 printf("server:SSL_read()\n"); */
1387 if (do_client
&& debug
)
1389 if (SSL_in_init(c_ssl
))
1390 printf("client waiting in SSL_connect - %s\n",
1391 SSL_state_string_long(c_ssl
));
1392 /* else if (c_write)
1393 printf("client:SSL_write()\n");
1395 printf("client:SSL_read()\n"); */
1398 if (!do_client
&& !do_server
)
1400 fprintf(stdout
,"ERROR IN STARTUP\n");
1401 ERR_print_errors(bio_err
);
1404 if (do_client
&& !(done
& C_DONE
))
1408 j
= (cw_num
> (long)sizeof(cbuf
)) ?
1409 (int)sizeof(cbuf
) : (int)cw_num
;
1410 i
=BIO_write(c_bio
,cbuf
,j
);
1415 if (BIO_should_retry(c_bio
))
1417 if (BIO_should_read(c_bio
))
1419 if (BIO_should_write(c_bio
))
1424 fprintf(stderr
,"ERROR in CLIENT\n");
1425 ERR_print_errors(bio_err
);
1431 fprintf(stderr
,"SSL CLIENT STARTUP FAILED\n");
1437 printf("client wrote %d\n",i
);
1446 i
=BIO_read(c_bio
,cbuf
,sizeof(cbuf
));
1451 if (BIO_should_retry(c_bio
))
1453 if (BIO_should_read(c_bio
))
1455 if (BIO_should_write(c_bio
))
1460 fprintf(stderr
,"ERROR in CLIENT\n");
1461 ERR_print_errors(bio_err
);
1467 fprintf(stderr
,"SSL CLIENT STARTUP FAILED\n");
1473 printf("client read %d\n",i
);
1490 if (do_server
&& !(done
& S_DONE
))
1494 i
=BIO_read(s_bio
,sbuf
,sizeof(cbuf
));
1499 if (BIO_should_retry(s_bio
))
1501 if (BIO_should_read(s_bio
))
1503 if (BIO_should_write(s_bio
))
1508 fprintf(stderr
,"ERROR in SERVER\n");
1509 ERR_print_errors(bio_err
);
1515 ERR_print_errors(bio_err
);
1516 fprintf(stderr
,"SSL SERVER STARTUP FAILED in SSL_read\n");
1522 printf("server read %d\n",i
);
1539 j
= (sw_num
> (long)sizeof(sbuf
)) ?
1540 (int)sizeof(sbuf
) : (int)sw_num
;
1541 i
=BIO_write(s_bio
,sbuf
,j
);
1546 if (BIO_should_retry(s_bio
))
1548 if (BIO_should_read(s_bio
))
1550 if (BIO_should_write(s_bio
))
1555 fprintf(stderr
,"ERROR in SERVER\n");
1556 ERR_print_errors(bio_err
);
1562 ERR_print_errors(bio_err
);
1563 fprintf(stderr
,"SSL SERVER STARTUP FAILED in SSL_write\n");
1569 printf("server wrote %d\n",i
);
1579 if ((done
& S_DONE
) && (done
& C_DONE
)) break;
1583 print_details(c_ssl
, "DONE: ");
1586 /* We have to set the BIO's to NULL otherwise they will be
1587 * OPENSSL_free()ed twice. Once when th s_ssl is SSL_free()ed and
1588 * again when c_ssl is SSL_free()ed.
1589 * This is a hack required because s_ssl and c_ssl are sharing the same
1590 * BIO structure and SSL_set_bio() and SSL_free() automatically
1591 * BIO_free non NULL entries.
1592 * You should not normally do this or be required to do this */
1604 if (c_to_s
!= NULL
) BIO_free(c_to_s
);
1605 if (s_to_c
!= NULL
) BIO_free(s_to_c
);
1606 if (c_bio
!= NULL
) BIO_free_all(c_bio
);
1607 if (s_bio
!= NULL
) BIO_free_all(s_bio
);
1611 static int get_proxy_auth_ex_data_idx(void)
1613 static volatile int idx
= -1;
1616 CRYPTO_w_lock(CRYPTO_LOCK_SSL_CTX
);
1619 idx
= X509_STORE_CTX_get_ex_new_index(0,
1620 "SSLtest for verify callback", NULL
,NULL
,NULL
);
1622 CRYPTO_w_unlock(CRYPTO_LOCK_SSL_CTX
);
1627 static int MS_CALLBACK
verify_callback(int ok
, X509_STORE_CTX
*ctx
)
1631 s
=X509_NAME_oneline(X509_get_subject_name(ctx
->current_cert
),buf
,
1636 fprintf(stderr
,"depth=%d %s\n",
1637 ctx
->error_depth
,buf
);
1640 fprintf(stderr
,"depth=%d error=%d %s\n",
1641 ctx
->error_depth
,ctx
->error
,buf
);
1647 fprintf(stderr
,"Error string: %s\n",
1648 X509_verify_cert_error_string(ctx
->error
));
1651 case X509_V_ERR_CERT_NOT_YET_VALID
:
1652 case X509_V_ERR_CERT_HAS_EXPIRED
:
1653 case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT
:
1654 fprintf(stderr
," ... ignored.\n");
1661 X509
*xs
= ctx
->current_cert
;
1663 X509
*xi
= ctx
->current_issuer
;
1666 if (xs
->ex_flags
& EXFLAG_PROXY
)
1668 unsigned int *letters
=
1669 X509_STORE_CTX_get_ex_data(ctx
,
1670 get_proxy_auth_ex_data_idx());
1676 PROXY_CERT_INFO_EXTENSION
*pci
=
1677 X509_get_ext_d2i(xs
, NID_proxyCertInfo
,
1680 switch (OBJ_obj2nid(pci
->proxyPolicy
->policyLanguage
))
1682 case NID_Independent
:
1683 /* Completely meaningless in this
1684 program, as there's no way to
1685 grant explicit rights to a
1686 specific PrC. Basically, using
1687 id-ppl-Independent is the perfect
1688 way to grant no rights at all. */
1689 fprintf(stderr
, " Independent proxy certificate");
1690 for (i
= 0; i
< 26; i
++)
1693 case NID_id_ppl_inheritAll
:
1694 /* This is basically a NOP, we
1695 simply let the current rights
1696 stand as they are. */
1697 fprintf(stderr
, " Proxy certificate inherits all");
1701 pci
->proxyPolicy
->policy
->data
;
1702 i
= pci
->proxyPolicy
->policy
->length
;
1704 /* The algorithm works as follows:
1705 it is assumed that previous
1706 iterations or the initial granted
1707 rights has already set some elements
1708 of `letters'. What we need to do is
1709 to clear those that weren't granted
1710 by the current PrC as well. The
1711 easiest way to do this is to add 1
1712 to all the elements whose letters
1713 are given with the current policy.
1714 That way, all elements that are set
1715 by the current policy and were
1716 already set by earlier policies and
1717 through the original grant of rights
1718 will get the value 2 or higher.
1719 The last thing to do is to sweep
1720 through `letters' and keep the
1721 elements having the value 2 as set,
1722 and clear all the others. */
1724 fprintf(stderr
, " Certificate proxy rights = %*.*s", i
, i
, s
);
1728 if (isascii(c
) && isalpha(c
))
1735 for (i
= 0; i
< 26; i
++)
1744 ", resulting proxy rights = ");
1745 for(i
= 0; i
< 26; i
++)
1748 fprintf(stderr
, "%c", i
+ 'A');
1752 fprintf(stderr
, "none");
1753 fprintf(stderr
, "\n");
1755 PROXY_CERT_INFO_EXTENSION_free(pci
);
1763 static void process_proxy_debug(int indent
, const char *format
, ...)
1765 static const char indentation
[] =
1766 ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>"
1767 ">>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>"; /* That's 80 > */
1768 char my_format
[256];
1771 BIO_snprintf(my_format
, sizeof(my_format
), "%*.*s %s",
1772 indent
, indent
, indentation
, format
);
1774 va_start(args
, format
);
1775 vfprintf(stderr
, my_format
, args
);
1783 static int process_proxy_cond_adders(unsigned int letters
[26],
1784 const char *cond
, const char **cond_end
, int *pos
, int indent
);
1785 static int process_proxy_cond_val(unsigned int letters
[26],
1786 const char *cond
, const char **cond_end
, int *pos
, int indent
)
1792 while(isspace((int)*cond
))
1799 process_proxy_debug(indent
,
1800 "Start process_proxy_cond_val at position %d: %s\n",
1807 while(isspace((int)*cond
))
1817 ok
= process_proxy_cond_adders(letters
, cond
, cond_end
, pos
,
1822 while(isspace((int)*cond
))
1830 "Weird condition character in position %d: "
1837 else if (isascii(c
) && isalpha(c
))
1841 ok
= letters
[c
- 'A'];
1847 "Weird condition character in position %d: "
1854 if (ok
>= 0 && negate
)
1858 process_proxy_debug(indent
,
1859 "End process_proxy_cond_val at position %d: %s, returning %d\n",
1864 static int process_proxy_cond_multipliers(unsigned int letters
[26],
1865 const char *cond
, const char **cond_end
, int *pos
, int indent
)
1871 process_proxy_debug(indent
,
1872 "Start process_proxy_cond_multipliers at position %d: %s\n",
1875 ok
= process_proxy_cond_val(letters
, cond
, cond_end
, pos
, indent
+ 1);
1882 while(isspace((int)*cond
))
1896 ok
= process_proxy_cond_val(letters
,
1897 cond
, cond_end
, pos
, indent
+ 1);
1911 fprintf(stderr
, "SOMETHING IS SERIOUSLY WRONG!"
1923 process_proxy_debug(indent
,
1924 "End process_proxy_cond_multipliers at position %d: %s, returning %d\n",
1930 static int process_proxy_cond_adders(unsigned int letters
[26],
1931 const char *cond
, const char **cond_end
, int *pos
, int indent
)
1937 process_proxy_debug(indent
,
1938 "Start process_proxy_cond_adders at position %d: %s\n",
1941 ok
= process_proxy_cond_multipliers(letters
, cond
, cond_end
, pos
,
1949 while(isspace((int)*cond
))
1962 ok
= process_proxy_cond_multipliers(letters
,
1963 cond
, cond_end
, pos
, indent
+ 1);
1974 fprintf(stderr
, "SOMETHING IS SERIOUSLY WRONG!"
1986 process_proxy_debug(indent
,
1987 "End process_proxy_cond_adders at position %d: %s, returning %d\n",
1994 static int process_proxy_cond(unsigned int letters
[26],
1995 const char *cond
, const char **cond_end
)
1998 return process_proxy_cond_adders(letters
, cond
, cond_end
, &pos
, 1);
2001 static int MS_CALLBACK
app_verify_callback(X509_STORE_CTX
*ctx
, void *arg
)
2004 struct app_verify_arg
*cb_arg
= arg
;
2005 unsigned int letters
[26]; /* only used with proxy_auth */
2007 if (cb_arg
->app_verify
)
2009 char *s
= NULL
,buf
[256];
2011 fprintf(stderr
, "In app_verify_callback, allowing cert. ");
2012 fprintf(stderr
, "Arg is: %s\n", cb_arg
->string
);
2013 fprintf(stderr
, "Finished printing do we have a context? 0x%p a cert? 0x%p\n",
2014 (void *)ctx
, (void *)ctx
->cert
);
2016 s
=X509_NAME_oneline(X509_get_subject_name(ctx
->cert
),buf
,256);
2019 fprintf(stderr
,"cert depth=%d %s\n",ctx
->error_depth
,buf
);
2023 if (cb_arg
->proxy_auth
)
2025 int found_any
= 0, i
;
2028 for(i
= 0; i
< 26; i
++)
2030 for(sp
= cb_arg
->proxy_auth
; *sp
; sp
++)
2033 if (isascii(c
) && isalpha(c
))
2037 letters
[c
- 'A'] = 1;
2042 " Initial proxy rights = ");
2043 for(i
= 0; i
< 26; i
++)
2046 fprintf(stderr
, "%c", i
+ 'A');
2050 fprintf(stderr
, "none");
2051 fprintf(stderr
, "\n");
2053 X509_STORE_CTX_set_ex_data(ctx
,
2054 get_proxy_auth_ex_data_idx(),letters
);
2056 if (cb_arg
->allow_proxy_certs
)
2058 X509_STORE_CTX_set_flags(ctx
, X509_V_FLAG_ALLOW_PROXY_CERTS
);
2061 #ifndef OPENSSL_NO_X509_VERIFY
2062 # ifdef OPENSSL_FIPS
2063 if(s
->version
== TLS1_VERSION
)
2066 ok
= X509_verify_cert(ctx
);
2067 # ifdef OPENSSL_FIPS
2068 if(s
->version
== TLS1_VERSION
)
2073 if (cb_arg
->proxy_auth
)
2077 const char *cond_end
= NULL
;
2079 ok
= process_proxy_cond(letters
,
2080 cb_arg
->proxy_cond
, &cond_end
);
2086 fprintf(stderr
, "Stopped processing condition before it's end.\n");
2090 fprintf(stderr
, "Proxy rights check with condition '%s' proved invalid\n",
2091 cb_arg
->proxy_cond
);
2093 fprintf(stderr
, "Proxy rights check with condition '%s' proved valid\n",
2094 cb_arg
->proxy_cond
);
2100 #ifndef OPENSSL_NO_RSA
2101 static RSA
*rsa_tmp
=NULL
;
2103 static RSA MS_CALLBACK
*tmp_rsa_cb(SSL
*s
, int is_export
, int keylength
)
2106 if (rsa_tmp
== NULL
)
2109 rsa_tmp
= RSA_new();
2110 if(!bn
|| !rsa_tmp
|| !BN_set_word(bn
, RSA_F4
))
2112 BIO_printf(bio_err
, "Memory error...");
2115 BIO_printf(bio_err
,"Generating temp (%d bit) RSA key...",keylength
);
2116 (void)BIO_flush(bio_err
);
2117 if(!RSA_generate_key_ex(rsa_tmp
,keylength
,bn
,NULL
))
2119 BIO_printf(bio_err
, "Error generating key.");
2124 BIO_printf(bio_err
,"\n");
2125 (void)BIO_flush(bio_err
);
2131 static void free_tmp_rsa(void)
2133 if (rsa_tmp
!= NULL
)
2141 #ifndef OPENSSL_NO_DH
2142 /* These DH parameters have been generated as follows:
2143 * $ openssl dhparam -C -noout 512
2144 * $ openssl dhparam -C -noout 1024
2145 * $ openssl dhparam -C -noout -dsaparam 1024
2146 * (The third function has been renamed to avoid name conflicts.)
2148 static DH
*get_dh512()
2150 static unsigned char dh512_p
[]={
2151 0xCB,0xC8,0xE1,0x86,0xD0,0x1F,0x94,0x17,0xA6,0x99,0xF0,0xC6,
2152 0x1F,0x0D,0xAC,0xB6,0x25,0x3E,0x06,0x39,0xCA,0x72,0x04,0xB0,
2153 0x6E,0xDA,0xC0,0x61,0xE6,0x7A,0x77,0x25,0xE8,0x3B,0xB9,0x5F,
2154 0x9A,0xB6,0xB5,0xFE,0x99,0x0B,0xA1,0x93,0x4E,0x35,0x33,0xB8,
2155 0xE1,0xF1,0x13,0x4F,0x59,0x1A,0xD2,0x57,0xC0,0x26,0x21,0x33,
2156 0x02,0xC5,0xAE,0x23,
2158 static unsigned char dh512_g
[]={
2163 if ((dh
=DH_new()) == NULL
) return(NULL
);
2164 dh
->p
=BN_bin2bn(dh512_p
,sizeof(dh512_p
),NULL
);
2165 dh
->g
=BN_bin2bn(dh512_g
,sizeof(dh512_g
),NULL
);
2166 if ((dh
->p
== NULL
) || (dh
->g
== NULL
))
2167 { DH_free(dh
); return(NULL
); }
2171 static DH
*get_dh1024()
2173 static unsigned char dh1024_p
[]={
2174 0xF8,0x81,0x89,0x7D,0x14,0x24,0xC5,0xD1,0xE6,0xF7,0xBF,0x3A,
2175 0xE4,0x90,0xF4,0xFC,0x73,0xFB,0x34,0xB5,0xFA,0x4C,0x56,0xA2,
2176 0xEA,0xA7,0xE9,0xC0,0xC0,0xCE,0x89,0xE1,0xFA,0x63,0x3F,0xB0,
2177 0x6B,0x32,0x66,0xF1,0xD1,0x7B,0xB0,0x00,0x8F,0xCA,0x87,0xC2,
2178 0xAE,0x98,0x89,0x26,0x17,0xC2,0x05,0xD2,0xEC,0x08,0xD0,0x8C,
2179 0xFF,0x17,0x52,0x8C,0xC5,0x07,0x93,0x03,0xB1,0xF6,0x2F,0xB8,
2180 0x1C,0x52,0x47,0x27,0x1B,0xDB,0xD1,0x8D,0x9D,0x69,0x1D,0x52,
2181 0x4B,0x32,0x81,0xAA,0x7F,0x00,0xC8,0xDC,0xE6,0xD9,0xCC,0xC1,
2182 0x11,0x2D,0x37,0x34,0x6C,0xEA,0x02,0x97,0x4B,0x0E,0xBB,0xB1,
2183 0x71,0x33,0x09,0x15,0xFD,0xDD,0x23,0x87,0x07,0x5E,0x89,0xAB,
2184 0x6B,0x7C,0x5F,0xEC,0xA6,0x24,0xDC,0x53,
2186 static unsigned char dh1024_g
[]={
2191 if ((dh
=DH_new()) == NULL
) return(NULL
);
2192 dh
->p
=BN_bin2bn(dh1024_p
,sizeof(dh1024_p
),NULL
);
2193 dh
->g
=BN_bin2bn(dh1024_g
,sizeof(dh1024_g
),NULL
);
2194 if ((dh
->p
== NULL
) || (dh
->g
== NULL
))
2195 { DH_free(dh
); return(NULL
); }
2199 static DH
*get_dh1024dsa()
2201 static unsigned char dh1024_p
[]={
2202 0xC8,0x00,0xF7,0x08,0x07,0x89,0x4D,0x90,0x53,0xF3,0xD5,0x00,
2203 0x21,0x1B,0xF7,0x31,0xA6,0xA2,0xDA,0x23,0x9A,0xC7,0x87,0x19,
2204 0x3B,0x47,0xB6,0x8C,0x04,0x6F,0xFF,0xC6,0x9B,0xB8,0x65,0xD2,
2205 0xC2,0x5F,0x31,0x83,0x4A,0xA7,0x5F,0x2F,0x88,0x38,0xB6,0x55,
2206 0xCF,0xD9,0x87,0x6D,0x6F,0x9F,0xDA,0xAC,0xA6,0x48,0xAF,0xFC,
2207 0x33,0x84,0x37,0x5B,0x82,0x4A,0x31,0x5D,0xE7,0xBD,0x52,0x97,
2208 0xA1,0x77,0xBF,0x10,0x9E,0x37,0xEA,0x64,0xFA,0xCA,0x28,0x8D,
2209 0x9D,0x3B,0xD2,0x6E,0x09,0x5C,0x68,0xC7,0x45,0x90,0xFD,0xBB,
2210 0x70,0xC9,0x3A,0xBB,0xDF,0xD4,0x21,0x0F,0xC4,0x6A,0x3C,0xF6,
2211 0x61,0xCF,0x3F,0xD6,0x13,0xF1,0x5F,0xBC,0xCF,0xBC,0x26,0x9E,
2212 0xBC,0x0B,0xBD,0xAB,0x5D,0xC9,0x54,0x39,
2214 static unsigned char dh1024_g
[]={
2215 0x3B,0x40,0x86,0xE7,0xF3,0x6C,0xDE,0x67,0x1C,0xCC,0x80,0x05,
2216 0x5A,0xDF,0xFE,0xBD,0x20,0x27,0x74,0x6C,0x24,0xC9,0x03,0xF3,
2217 0xE1,0x8D,0xC3,0x7D,0x98,0x27,0x40,0x08,0xB8,0x8C,0x6A,0xE9,
2218 0xBB,0x1A,0x3A,0xD6,0x86,0x83,0x5E,0x72,0x41,0xCE,0x85,0x3C,
2219 0xD2,0xB3,0xFC,0x13,0xCE,0x37,0x81,0x9E,0x4C,0x1C,0x7B,0x65,
2220 0xD3,0xE6,0xA6,0x00,0xF5,0x5A,0x95,0x43,0x5E,0x81,0xCF,0x60,
2221 0xA2,0x23,0xFC,0x36,0xA7,0x5D,0x7A,0x4C,0x06,0x91,0x6E,0xF6,
2222 0x57,0xEE,0x36,0xCB,0x06,0xEA,0xF5,0x3D,0x95,0x49,0xCB,0xA7,
2223 0xDD,0x81,0xDF,0x80,0x09,0x4A,0x97,0x4D,0xA8,0x22,0x72,0xA1,
2224 0x7F,0xC4,0x70,0x56,0x70,0xE8,0x20,0x10,0x18,0x8F,0x2E,0x60,
2225 0x07,0xE7,0x68,0x1A,0x82,0x5D,0x32,0xA2,
2229 if ((dh
=DH_new()) == NULL
) return(NULL
);
2230 dh
->p
=BN_bin2bn(dh1024_p
,sizeof(dh1024_p
),NULL
);
2231 dh
->g
=BN_bin2bn(dh1024_g
,sizeof(dh1024_g
),NULL
);
2232 if ((dh
->p
== NULL
) || (dh
->g
== NULL
))
2233 { DH_free(dh
); return(NULL
); }
2239 static int do_test_cipherlist(void)
2242 const SSL_METHOD
*meth
;
2243 SSL_CIPHER
*ci
, *tci
= NULL
;
2245 #ifndef OPENSSL_NO_SSL2
2246 fprintf(stderr
, "testing SSLv2 cipher list order: ");
2247 meth
= SSLv2_method();
2248 while ((ci
= meth
->get_cipher(i
++)) != NULL
)
2251 if (ci
->id
>= tci
->id
)
2253 fprintf(stderr
, "failed %lx vs. %lx\n", ci
->id
, tci
->id
);
2258 fprintf(stderr
, "ok\n");
2260 #ifndef OPENSSL_NO_SSL3
2261 fprintf(stderr
, "testing SSLv3 cipher list order: ");
2262 meth
= SSLv3_method();
2264 while ((ci
= meth
->get_cipher(i
++)) != NULL
)
2267 if (ci
->id
>= tci
->id
)
2269 fprintf(stderr
, "failed %lx vs. %lx\n", ci
->id
, tci
->id
);
2274 fprintf(stderr
, "ok\n");
2276 #ifndef OPENSSL_NO_TLS1
2277 fprintf(stderr
, "testing TLSv1 cipher list order: ");
2278 meth
= TLSv1_method();
2280 while ((ci
= meth
->get_cipher(i
++)) != NULL
)
2283 if (ci
->id
>= tci
->id
)
2285 fprintf(stderr
, "failed %lx vs. %lx\n", ci
->id
, tci
->id
);
2290 fprintf(stderr
, "ok\n");