fkvm_get_regs: missing break in switch statement

[freebsd-src/fkvm-freebsd.git] / sys / kern / kern_intr.c

/*-
 * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice unmodified, this list of conditions, and the following
 *    disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include "opt_ddb.h"

#include <sys/param.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/cpuset.h>
#include <sys/rtprio.h>
#include <sys/systm.h>
#include <sys/interrupt.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/ktr.h>
#include <sys/limits.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/random.h>
#include <sys/resourcevar.h>
#include <sys/sched.h>
#include <sys/smp.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/unistd.h>
#include <sys/vmmeter.h>
#include <machine/atomic.h>
#include <machine/cpu.h>
#include <machine/md_var.h>
#include <machine/stdarg.h>
#ifdef DDB
#include <ddb/ddb.h>
#include <ddb/db_sym.h>
#endif

/*
 * Describe an interrupt thread.  There is one of these per interrupt event.
 */
struct intr_thread {
        struct intr_event *it_event;
        struct thread *it_thread;       /* Kernel thread. */
        int     it_flags;               /* (j) IT_* flags. */
        int     it_need;                /* Needs service. */
};

/* Interrupt thread flags kept in it_flags */
#define IT_DEAD         0x000001        /* Thread is waiting to exit. */

struct  intr_entropy {
        struct  thread *td;
        uintptr_t event;
};

struct  intr_event *clk_intr_event;
struct  intr_event *tty_intr_event;
void    *vm_ih;
struct proc *intrproc;

static MALLOC_DEFINE(M_ITHREAD, "ithread", "Interrupt Threads");

static int intr_storm_threshold = 1000;
TUNABLE_INT("hw.intr_storm_threshold", &intr_storm_threshold);
SYSCTL_INT(_hw, OID_AUTO, intr_storm_threshold, CTLFLAG_RW,
    &intr_storm_threshold, 0,
    "Number of consecutive interrupts before storm protection is enabled");
static TAILQ_HEAD(, intr_event) event_list =
    TAILQ_HEAD_INITIALIZER(event_list);
static struct mtx event_lock;
MTX_SYSINIT(intr_event_list, &event_lock, "intr event list", MTX_DEF);

static void     intr_event_update(struct intr_event *ie);
#ifdef INTR_FILTER
static int      intr_event_schedule_thread(struct intr_event *ie,
                    struct intr_thread *ithd);
static int      intr_filter_loop(struct intr_event *ie,
                    struct trapframe *frame, struct intr_thread **ithd);
static struct intr_thread *ithread_create(const char *name,
                              struct intr_handler *ih);
#else
static int      intr_event_schedule_thread(struct intr_event *ie);
static struct intr_thread *ithread_create(const char *name);
#endif
static void     ithread_destroy(struct intr_thread *ithread);
static void     ithread_execute_handlers(struct proc *p, 
                    struct intr_event *ie);
#ifdef INTR_FILTER
static void     priv_ithread_execute_handler(struct proc *p, 
                    struct intr_handler *ih);
#endif
static void     ithread_loop(void *);
static void     ithread_update(struct intr_thread *ithd);
static void     start_softintr(void *);

/* Map an interrupt type to an ithread priority. */
u_char
intr_priority(enum intr_type flags)
{
        u_char pri;

        flags &= (INTR_TYPE_TTY | INTR_TYPE_BIO | INTR_TYPE_NET |
            INTR_TYPE_CAM | INTR_TYPE_MISC | INTR_TYPE_CLK | INTR_TYPE_AV);
        switch (flags) {
        case INTR_TYPE_TTY:
                pri = PI_TTYLOW;
                break;
        case INTR_TYPE_BIO:
                /*
                 * XXX We need to refine this.  BSD/OS distinguishes
                 * between tape and disk priorities.
                 */
                pri = PI_DISK;
                break;
        case INTR_TYPE_NET:
                pri = PI_NET;
                break;
        case INTR_TYPE_CAM:
                pri = PI_DISK;          /* XXX or PI_CAM? */
                break;
        case INTR_TYPE_AV:              /* Audio/video */
                pri = PI_AV;
                break;
        case INTR_TYPE_CLK:
                pri = PI_REALTIME;
                break;
        case INTR_TYPE_MISC:
                pri = PI_DULL;          /* don't care */
                break;
        default:
                /* We didn't specify an interrupt level. */
                panic("intr_priority: no interrupt type in flags");
        }

        return pri;
}

/*
 * Update an ithread based on the associated intr_event.
 */
static void
ithread_update(struct intr_thread *ithd)
{
        struct intr_event *ie;
        struct thread *td;
        u_char pri;

        ie = ithd->it_event;
        td = ithd->it_thread;

        /* Determine the overall priority of this event. */
        if (TAILQ_EMPTY(&ie->ie_handlers))
                pri = PRI_MAX_ITHD;
        else
                pri = TAILQ_FIRST(&ie->ie_handlers)->ih_pri;

        /* Update name and priority. */
        strlcpy(td->td_name, ie->ie_fullname, sizeof(td->td_name));
        thread_lock(td);
        sched_prio(td, pri);
        thread_unlock(td);
}

/*
 * Regenerate the full name of an interrupt event and update its priority.
 */
static void
intr_event_update(struct intr_event *ie)
{
        struct intr_handler *ih;
        char *last;
        int missed, space;

        /* Start off with no entropy and just the name of the event. */
        mtx_assert(&ie->ie_lock, MA_OWNED);
        strlcpy(ie->ie_fullname, ie->ie_name, sizeof(ie->ie_fullname));
        ie->ie_flags &= ~IE_ENTROPY;
        missed = 0;
        space = 1;

        /* Run through all the handlers updating values. */
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next) {
                if (strlen(ie->ie_fullname) + strlen(ih->ih_name) + 1 <
                    sizeof(ie->ie_fullname)) {
                        strcat(ie->ie_fullname, " ");
                        strcat(ie->ie_fullname, ih->ih_name);
                        space = 0;
                } else
                        missed++;
                if (ih->ih_flags & IH_ENTROPY)
                        ie->ie_flags |= IE_ENTROPY;
        }

        /*
         * If the handler names were too long, add +'s to indicate missing
         * names. If we run out of room and still have +'s to add, change
         * the last character from a + to a *.
         */
        last = &ie->ie_fullname[sizeof(ie->ie_fullname) - 2];
        while (missed-- > 0) {
                if (strlen(ie->ie_fullname) + 1 == sizeof(ie->ie_fullname)) {
                        if (*last == '+') {
                                *last = '*';
                                break;
                        } else
                                *last = '+';
                } else if (space) {
                        strcat(ie->ie_fullname, " +");
                        space = 0;
                } else
                        strcat(ie->ie_fullname, "+");
        }

        /*
         * If this event has an ithread, update it's priority and
         * name.
         */
        if (ie->ie_thread != NULL)
                ithread_update(ie->ie_thread);
        CTR2(KTR_INTR, "%s: updated %s", __func__, ie->ie_fullname);
}

int
intr_event_create(struct intr_event **event, void *source,int flags, int irq,
    void (*pre_ithread)(void *), void (*post_ithread)(void *),
    void (*post_filter)(void *), int (*assign_cpu)(void *, u_char),
    const char *fmt, ...)
{
        struct intr_event *ie;
        va_list ap;

        /* The only valid flag during creation is IE_SOFT. */
        if ((flags & ~IE_SOFT) != 0)
                return (EINVAL);
        ie = malloc(sizeof(struct intr_event), M_ITHREAD, M_WAITOK | M_ZERO);
        ie->ie_source = source;
        ie->ie_pre_ithread = pre_ithread;
        ie->ie_post_ithread = post_ithread;
        ie->ie_post_filter = post_filter;
        ie->ie_assign_cpu = assign_cpu;
        ie->ie_flags = flags;
        ie->ie_irq = irq;
        ie->ie_cpu = NOCPU;
        TAILQ_INIT(&ie->ie_handlers);
        mtx_init(&ie->ie_lock, "intr event", NULL, MTX_DEF);

        va_start(ap, fmt);
        vsnprintf(ie->ie_name, sizeof(ie->ie_name), fmt, ap);
        va_end(ap);
        strlcpy(ie->ie_fullname, ie->ie_name, sizeof(ie->ie_fullname));
        mtx_lock(&event_lock);
        TAILQ_INSERT_TAIL(&event_list, ie, ie_list);
        mtx_unlock(&event_lock);
        if (event != NULL)
                *event = ie;
        CTR2(KTR_INTR, "%s: created %s", __func__, ie->ie_name);
        return (0);
}

/*
 * Bind an interrupt event to the specified CPU.  Note that not all
 * platforms support binding an interrupt to a CPU.  For those
 * platforms this request will fail.  For supported platforms, any
 * associated ithreads as well as the primary interrupt context will
 * be bound to the specificed CPU.  Using a cpu id of NOCPU unbinds
 * the interrupt event.
 */
int
intr_event_bind(struct intr_event *ie, u_char cpu)
{
        cpuset_t mask;
        lwpid_t id;
        int error;

        /* Need a CPU to bind to. */
        if (cpu != NOCPU && CPU_ABSENT(cpu))
                return (EINVAL);

        if (ie->ie_assign_cpu == NULL)
                return (EOPNOTSUPP);
        /*
         * If we have any ithreads try to set their mask first since this
         * can fail.
         */
        mtx_lock(&ie->ie_lock);
        if (ie->ie_thread != NULL) {
                CPU_ZERO(&mask);
                if (cpu == NOCPU)
                        CPU_COPY(cpuset_root, &mask);
                else
                        CPU_SET(cpu, &mask);
                id = ie->ie_thread->it_thread->td_tid;
                mtx_unlock(&ie->ie_lock);
                error = cpuset_setthread(id, &mask);
                if (error)
                        return (error);
        } else
                mtx_unlock(&ie->ie_lock);
        error = ie->ie_assign_cpu(ie->ie_source, cpu);
        if (error)
                return (error);
        mtx_lock(&ie->ie_lock);
        ie->ie_cpu = cpu;
        mtx_unlock(&ie->ie_lock);

        return (error);
}

static struct intr_event *
intr_lookup(int irq)
{
        struct intr_event *ie;

        mtx_lock(&event_lock);
        TAILQ_FOREACH(ie, &event_list, ie_list)
                if (ie->ie_irq == irq &&
                    (ie->ie_flags & IE_SOFT) == 0 &&
                    TAILQ_FIRST(&ie->ie_handlers) != NULL)
                        break;
        mtx_unlock(&event_lock);
        return (ie);
}

int
intr_setaffinity(int irq, void *m)
{
        struct intr_event *ie;
        cpuset_t *mask;
        u_char cpu;
        int n;

        mask = m;
        cpu = NOCPU;
        /*
         * If we're setting all cpus we can unbind.  Otherwise make sure
         * only one cpu is in the set.
         */
        if (CPU_CMP(cpuset_root, mask)) {
                for (n = 0; n < CPU_SETSIZE; n++) {
                        if (!CPU_ISSET(n, mask))
                                continue;
                        if (cpu != NOCPU)
                                return (EINVAL);
                        cpu = (u_char)n;
                }
        }
        ie = intr_lookup(irq);
        if (ie == NULL)
                return (ESRCH);
        intr_event_bind(ie, cpu);
        return (0);
}

int
intr_getaffinity(int irq, void *m)
{
        struct intr_event *ie;
        cpuset_t *mask;

        mask = m;
        ie = intr_lookup(irq);
        if (ie == NULL)
                return (ESRCH);
        CPU_ZERO(mask);
        mtx_lock(&ie->ie_lock);
        if (ie->ie_cpu == NOCPU)
                CPU_COPY(cpuset_root, mask);
        else
                CPU_SET(ie->ie_cpu, mask);
        mtx_unlock(&ie->ie_lock);
        return (0);
}

int
intr_event_destroy(struct intr_event *ie)
{

        mtx_lock(&event_lock);
        mtx_lock(&ie->ie_lock);
        if (!TAILQ_EMPTY(&ie->ie_handlers)) {
                mtx_unlock(&ie->ie_lock);
                mtx_unlock(&event_lock);
                return (EBUSY);
        }
        TAILQ_REMOVE(&event_list, ie, ie_list);
#ifndef notyet
        if (ie->ie_thread != NULL) {
                ithread_destroy(ie->ie_thread);
                ie->ie_thread = NULL;
        }
#endif
        mtx_unlock(&ie->ie_lock);
        mtx_unlock(&event_lock);
        mtx_destroy(&ie->ie_lock);
        free(ie, M_ITHREAD);
        return (0);
}

#ifndef INTR_FILTER
static struct intr_thread *
ithread_create(const char *name)
{
        struct intr_thread *ithd;
        struct thread *td;
        int error;

        ithd = malloc(sizeof(struct intr_thread), M_ITHREAD, M_WAITOK | M_ZERO);

        error = kproc_kthread_add(ithread_loop, ithd, &intrproc,
                    &td, RFSTOPPED | RFHIGHPID,
                    0, "intr", "%s", name);
        if (error)
                panic("kproc_create() failed with %d", error);
        thread_lock(td);
        sched_class(td, PRI_ITHD);
        TD_SET_IWAIT(td);
        thread_unlock(td);
        td->td_pflags |= TDP_ITHREAD;
        ithd->it_thread = td;
        CTR2(KTR_INTR, "%s: created %s", __func__, name);
        return (ithd);
}
#else
static struct intr_thread *
ithread_create(const char *name, struct intr_handler *ih)
{
        struct intr_thread *ithd;
        struct thread *td;
        int error;

        ithd = malloc(sizeof(struct intr_thread), M_ITHREAD, M_WAITOK | M_ZERO);

        error = kproc_kthread_add(ithread_loop, ih, &intrproc,
                    &td, RFSTOPPED | RFHIGHPID,
                    0, "intr", "%s", name);
        if (error)
                panic("kproc_create() failed with %d", error);
        thread_lock(td);
        sched_class(td, PRI_ITHD);
        TD_SET_IWAIT(td);
        thread_unlock(td);
        td->td_pflags |= TDP_ITHREAD;
        ithd->it_thread = td;
        CTR2(KTR_INTR, "%s: created %s", __func__, name);
        return (ithd);
}
#endif

static void
ithread_destroy(struct intr_thread *ithread)
{
        struct thread *td;

        CTR2(KTR_INTR, "%s: killing %s", __func__, ithread->it_event->ie_name);
        td = ithread->it_thread;
        thread_lock(td);
        ithread->it_flags |= IT_DEAD;
        if (TD_AWAITING_INTR(td)) {
                TD_CLR_IWAIT(td);
                sched_add(td, SRQ_INTR);
        }
        thread_unlock(td);
}

#ifndef INTR_FILTER
int
intr_event_add_handler(struct intr_event *ie, const char *name,
    driver_filter_t filter, driver_intr_t handler, void *arg, u_char pri,
    enum intr_type flags, void **cookiep)
{
        struct intr_handler *ih, *temp_ih;
        struct intr_thread *it;

        if (ie == NULL || name == NULL || (handler == NULL && filter == NULL))
                return (EINVAL);

        /* Allocate and populate an interrupt handler structure. */
        ih = malloc(sizeof(struct intr_handler), M_ITHREAD, M_WAITOK | M_ZERO);
        ih->ih_filter = filter;
        ih->ih_handler = handler;
        ih->ih_argument = arg;
        ih->ih_name = name;
        ih->ih_event = ie;
        ih->ih_pri = pri;
        if (flags & INTR_EXCL)
                ih->ih_flags = IH_EXCLUSIVE;
        if (flags & INTR_MPSAFE)
                ih->ih_flags |= IH_MPSAFE;
        if (flags & INTR_ENTROPY)
                ih->ih_flags |= IH_ENTROPY;

        /* We can only have one exclusive handler in a event. */
        mtx_lock(&ie->ie_lock);
        if (!TAILQ_EMPTY(&ie->ie_handlers)) {
                if ((flags & INTR_EXCL) ||
                    (TAILQ_FIRST(&ie->ie_handlers)->ih_flags & IH_EXCLUSIVE)) {
                        mtx_unlock(&ie->ie_lock);
                        free(ih, M_ITHREAD);
                        return (EINVAL);
                }
        }

        /* Add the new handler to the event in priority order. */
        TAILQ_FOREACH(temp_ih, &ie->ie_handlers, ih_next) {
                if (temp_ih->ih_pri > ih->ih_pri)
                        break;
        }
        if (temp_ih == NULL)
                TAILQ_INSERT_TAIL(&ie->ie_handlers, ih, ih_next);
        else
                TAILQ_INSERT_BEFORE(temp_ih, ih, ih_next);
        intr_event_update(ie);

        /* Create a thread if we need one. */
        while (ie->ie_thread == NULL && handler != NULL) {
                if (ie->ie_flags & IE_ADDING_THREAD)
                        msleep(ie, &ie->ie_lock, 0, "ithread", 0);
                else {
                        ie->ie_flags |= IE_ADDING_THREAD;
                        mtx_unlock(&ie->ie_lock);
                        it = ithread_create("intr: newborn");
                        mtx_lock(&ie->ie_lock);
                        ie->ie_flags &= ~IE_ADDING_THREAD;
                        ie->ie_thread = it;
                        it->it_event = ie;
                        ithread_update(it);
                        wakeup(ie);
                }
        }
        CTR3(KTR_INTR, "%s: added %s to %s", __func__, ih->ih_name,
            ie->ie_name);
        mtx_unlock(&ie->ie_lock);

        if (cookiep != NULL)
                *cookiep = ih;
        return (0);
}
#else
int
intr_event_add_handler(struct intr_event *ie, const char *name,
    driver_filter_t filter, driver_intr_t handler, void *arg, u_char pri,
    enum intr_type flags, void **cookiep)
{
        struct intr_handler *ih, *temp_ih;
        struct intr_thread *it;

        if (ie == NULL || name == NULL || (handler == NULL && filter == NULL))
                return (EINVAL);

        /* Allocate and populate an interrupt handler structure. */
        ih = malloc(sizeof(struct intr_handler), M_ITHREAD, M_WAITOK | M_ZERO);
        ih->ih_filter = filter;
        ih->ih_handler = handler;
        ih->ih_argument = arg;
        ih->ih_name = name;
        ih->ih_event = ie;
        ih->ih_pri = pri;
        if (flags & INTR_EXCL)
                ih->ih_flags = IH_EXCLUSIVE;
        if (flags & INTR_MPSAFE)
                ih->ih_flags |= IH_MPSAFE;
        if (flags & INTR_ENTROPY)
                ih->ih_flags |= IH_ENTROPY;

        /* We can only have one exclusive handler in a event. */
        mtx_lock(&ie->ie_lock);
        if (!TAILQ_EMPTY(&ie->ie_handlers)) {
                if ((flags & INTR_EXCL) ||
                    (TAILQ_FIRST(&ie->ie_handlers)->ih_flags & IH_EXCLUSIVE)) {
                        mtx_unlock(&ie->ie_lock);
                        free(ih, M_ITHREAD);
                        return (EINVAL);
                }
        }

        /* Add the new handler to the event in priority order. */
        TAILQ_FOREACH(temp_ih, &ie->ie_handlers, ih_next) {
                if (temp_ih->ih_pri > ih->ih_pri)
                        break;
        }
        if (temp_ih == NULL)
                TAILQ_INSERT_TAIL(&ie->ie_handlers, ih, ih_next);
        else
                TAILQ_INSERT_BEFORE(temp_ih, ih, ih_next);
        intr_event_update(ie);

        /* For filtered handlers, create a private ithread to run on. */
        if (filter != NULL && handler != NULL) { 
                mtx_unlock(&ie->ie_lock);
                it = ithread_create("intr: newborn", ih);               
                mtx_lock(&ie->ie_lock);
                it->it_event = ie; 
                ih->ih_thread = it;
                ithread_update(it); // XXX - do we really need this?!?!?
        } else { /* Create the global per-event thread if we need one. */
                while (ie->ie_thread == NULL && handler != NULL) {
                        if (ie->ie_flags & IE_ADDING_THREAD)
                                msleep(ie, &ie->ie_lock, 0, "ithread", 0);
                        else {
                                ie->ie_flags |= IE_ADDING_THREAD;
                                mtx_unlock(&ie->ie_lock);
                                it = ithread_create("intr: newborn", ih);
                                mtx_lock(&ie->ie_lock);
                                ie->ie_flags &= ~IE_ADDING_THREAD;
                                ie->ie_thread = it;
                                it->it_event = ie;
                                ithread_update(it);
                                wakeup(ie);
                        }
                }
        }
        CTR3(KTR_INTR, "%s: added %s to %s", __func__, ih->ih_name,
            ie->ie_name);
        mtx_unlock(&ie->ie_lock);

        if (cookiep != NULL)
                *cookiep = ih;
        return (0);
}
#endif

/*
 * Return the ie_source field from the intr_event an intr_handler is
 * associated with.
 */
void *
intr_handler_source(void *cookie)
{
        struct intr_handler *ih;
        struct intr_event *ie;

        ih = (struct intr_handler *)cookie;
        if (ih == NULL)
                return (NULL);
        ie = ih->ih_event;
        KASSERT(ie != NULL,
            ("interrupt handler \"%s\" has a NULL interrupt event",
            ih->ih_name));
        return (ie->ie_source);
}

#ifndef INTR_FILTER
int
intr_event_remove_handler(void *cookie)
{
        struct intr_handler *handler = (struct intr_handler *)cookie;
        struct intr_event *ie;
#ifdef INVARIANTS
        struct intr_handler *ih;
#endif
#ifdef notyet
        int dead;
#endif

        if (handler == NULL)
                return (EINVAL);
        ie = handler->ih_event;
        KASSERT(ie != NULL,
            ("interrupt handler \"%s\" has a NULL interrupt event",
            handler->ih_name));
        mtx_lock(&ie->ie_lock);
        CTR3(KTR_INTR, "%s: removing %s from %s", __func__, handler->ih_name,
            ie->ie_name);
#ifdef INVARIANTS
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next)
                if (ih == handler)
                        goto ok;
        mtx_unlock(&ie->ie_lock);
        panic("interrupt handler \"%s\" not found in interrupt event \"%s\"",
            ih->ih_name, ie->ie_name);
ok:
#endif
        /*
         * If there is no ithread, then just remove the handler and return.
         * XXX: Note that an INTR_FAST handler might be running on another
         * CPU!
         */
        if (ie->ie_thread == NULL) {
                TAILQ_REMOVE(&ie->ie_handlers, handler, ih_next);
                mtx_unlock(&ie->ie_lock);
                free(handler, M_ITHREAD);
                return (0);
        }

        /*
         * If the interrupt thread is already running, then just mark this
         * handler as being dead and let the ithread do the actual removal.
         *
         * During a cold boot while cold is set, msleep() does not sleep,
         * so we have to remove the handler here rather than letting the
         * thread do it.
         */
        thread_lock(ie->ie_thread->it_thread);
        if (!TD_AWAITING_INTR(ie->ie_thread->it_thread) && !cold) {
                handler->ih_flags |= IH_DEAD;

                /*
                 * Ensure that the thread will process the handler list
                 * again and remove this handler if it has already passed
                 * it on the list.
                 */
                ie->ie_thread->it_need = 1;
        } else
                TAILQ_REMOVE(&ie->ie_handlers, handler, ih_next);
        thread_unlock(ie->ie_thread->it_thread);
        while (handler->ih_flags & IH_DEAD)
                msleep(handler, &ie->ie_lock, 0, "iev_rmh", 0);
        intr_event_update(ie);
#ifdef notyet
        /*
         * XXX: This could be bad in the case of ppbus(8).  Also, I think
         * this could lead to races of stale data when servicing an
         * interrupt.
         */
        dead = 1;
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next) {
                if (!(ih->ih_flags & IH_FAST)) {
                        dead = 0;
                        break;
                }
        }
        if (dead) {
                ithread_destroy(ie->ie_thread);
                ie->ie_thread = NULL;
        }
#endif
        mtx_unlock(&ie->ie_lock);
        free(handler, M_ITHREAD);
        return (0);
}

static int
intr_event_schedule_thread(struct intr_event *ie)
{
        struct intr_entropy entropy;
        struct intr_thread *it;
        struct thread *td;
        struct thread *ctd;
        struct proc *p;

        /*
         * If no ithread or no handlers, then we have a stray interrupt.
         */
        if (ie == NULL || TAILQ_EMPTY(&ie->ie_handlers) ||
            ie->ie_thread == NULL)
                return (EINVAL);

        ctd = curthread;
        it = ie->ie_thread;
        td = it->it_thread;
        p = td->td_proc;

        /*
         * If any of the handlers for this ithread claim to be good
         * sources of entropy, then gather some.
         */
        if (harvest.interrupt && ie->ie_flags & IE_ENTROPY) {
                CTR3(KTR_INTR, "%s: pid %d (%s) gathering entropy", __func__,
                    p->p_pid, td->td_name);
                entropy.event = (uintptr_t)ie;
                entropy.td = ctd;
                random_harvest(&entropy, sizeof(entropy), 2, 0,
                    RANDOM_INTERRUPT);
        }

        KASSERT(p != NULL, ("ithread %s has no process", ie->ie_name));

        /*
         * Set it_need to tell the thread to keep running if it is already
         * running.  Then, lock the thread and see if we actually need to
         * put it on the runqueue.
         */
        it->it_need = 1;
        thread_lock(td);
        if (TD_AWAITING_INTR(td)) {
                CTR3(KTR_INTR, "%s: schedule pid %d (%s)", __func__, p->p_pid,
                    td->td_name);
                TD_CLR_IWAIT(td);
                sched_add(td, SRQ_INTR);
        } else {
                CTR5(KTR_INTR, "%s: pid %d (%s): it_need %d, state %d",
                    __func__, p->p_pid, td->td_name, it->it_need, td->td_state);
        }
        thread_unlock(td);

        return (0);
}
#else
int
intr_event_remove_handler(void *cookie)
{
        struct intr_handler *handler = (struct intr_handler *)cookie;
        struct intr_event *ie;
        struct intr_thread *it;
#ifdef INVARIANTS
        struct intr_handler *ih;
#endif
#ifdef notyet
        int dead;
#endif

        if (handler == NULL)
                return (EINVAL);
        ie = handler->ih_event;
        KASSERT(ie != NULL,
            ("interrupt handler \"%s\" has a NULL interrupt event",
            handler->ih_name));
        mtx_lock(&ie->ie_lock);
        CTR3(KTR_INTR, "%s: removing %s from %s", __func__, handler->ih_name,
            ie->ie_name);
#ifdef INVARIANTS
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next)
                if (ih == handler)
                        goto ok;
        mtx_unlock(&ie->ie_lock);
        panic("interrupt handler \"%s\" not found in interrupt event \"%s\"",
            ih->ih_name, ie->ie_name);
ok:
#endif
        /*
         * If there are no ithreads (per event and per handler), then
         * just remove the handler and return.  
         * XXX: Note that an INTR_FAST handler might be running on another CPU!
         */
        if (ie->ie_thread == NULL && handler->ih_thread == NULL) {
                TAILQ_REMOVE(&ie->ie_handlers, handler, ih_next);
                mtx_unlock(&ie->ie_lock);
                free(handler, M_ITHREAD);
                return (0);
        }

        /* Private or global ithread? */
        it = (handler->ih_thread) ? handler->ih_thread : ie->ie_thread;
        /*
         * If the interrupt thread is already running, then just mark this
         * handler as being dead and let the ithread do the actual removal.
         *
         * During a cold boot while cold is set, msleep() does not sleep,
         * so we have to remove the handler here rather than letting the
         * thread do it.
         */
        thread_lock(it->it_thread);
        if (!TD_AWAITING_INTR(it->it_thread) && !cold) {
                handler->ih_flags |= IH_DEAD;

                /*
                 * Ensure that the thread will process the handler list
                 * again and remove this handler if it has already passed
                 * it on the list.
                 */
                it->it_need = 1;
        } else
                TAILQ_REMOVE(&ie->ie_handlers, handler, ih_next);
        thread_unlock(it->it_thread);
        while (handler->ih_flags & IH_DEAD)
                msleep(handler, &ie->ie_lock, 0, "iev_rmh", 0);
        /* 
         * At this point, the handler has been disconnected from the event,
         * so we can kill the private ithread if any.
         */
        if (handler->ih_thread) {
                ithread_destroy(handler->ih_thread);
                handler->ih_thread = NULL;
        }
        intr_event_update(ie);
#ifdef notyet
        /*
         * XXX: This could be bad in the case of ppbus(8).  Also, I think
         * this could lead to races of stale data when servicing an
         * interrupt.
         */
        dead = 1;
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next) {
                if (handler != NULL) {
                        dead = 0;
                        break;
                }
        }
        if (dead) {
                ithread_destroy(ie->ie_thread);
                ie->ie_thread = NULL;
        }
#endif
        mtx_unlock(&ie->ie_lock);
        free(handler, M_ITHREAD);
        return (0);
}

static int
intr_event_schedule_thread(struct intr_event *ie, struct intr_thread *it)
{
        struct intr_entropy entropy;
        struct thread *td;
        struct thread *ctd;
        struct proc *p;

        /*
         * If no ithread or no handlers, then we have a stray interrupt.
         */
        if (ie == NULL || TAILQ_EMPTY(&ie->ie_handlers) || it == NULL)
                return (EINVAL);

        ctd = curthread;
        td = it->it_thread;
        p = td->td_proc;

        /*
         * If any of the handlers for this ithread claim to be good
         * sources of entropy, then gather some.
         */
        if (harvest.interrupt && ie->ie_flags & IE_ENTROPY) {
                CTR3(KTR_INTR, "%s: pid %d (%s) gathering entropy", __func__,
                    p->p_pid, td->td_name);
                entropy.event = (uintptr_t)ie;
                entropy.td = ctd;
                random_harvest(&entropy, sizeof(entropy), 2, 0,
                    RANDOM_INTERRUPT);
        }

        KASSERT(p != NULL, ("ithread %s has no process", ie->ie_name));

        /*
         * Set it_need to tell the thread to keep running if it is already
         * running.  Then, lock the thread and see if we actually need to
         * put it on the runqueue.
         */
        it->it_need = 1;
        thread_lock(td);
        if (TD_AWAITING_INTR(td)) {
                CTR3(KTR_INTR, "%s: schedule pid %d (%s)", __func__, p->p_pid,
                    td->td_name);
                TD_CLR_IWAIT(td);
                sched_add(td, SRQ_INTR);
        } else {
                CTR5(KTR_INTR, "%s: pid %d (%s): it_need %d, state %d",
                    __func__, p->p_pid, td->td_name, it->it_need, td->td_state);
        }
        thread_unlock(td);

        return (0);
}
#endif

/*
 * Add a software interrupt handler to a specified event.  If a given event
 * is not specified, then a new event is created.
 */
int
swi_add(struct intr_event **eventp, const char *name, driver_intr_t handler,
            void *arg, int pri, enum intr_type flags, void **cookiep)
{
        struct intr_event *ie;
        int error;

        if (flags & INTR_ENTROPY)
                return (EINVAL);

        ie = (eventp != NULL) ? *eventp : NULL;

        if (ie != NULL) {
                if (!(ie->ie_flags & IE_SOFT))
                        return (EINVAL);
        } else {
                error = intr_event_create(&ie, NULL, IE_SOFT, 0,
                    NULL, NULL, NULL, NULL, "swi%d:", pri);
                if (error)
                        return (error);
                if (eventp != NULL)
                        *eventp = ie;
        }
        error = intr_event_add_handler(ie, name, NULL, handler, arg,
            (pri * RQ_PPQ) + PI_SOFT, flags, cookiep);
        if (error)
                return (error);
        if (pri == SWI_CLOCK) {
                struct proc *p;
                p = ie->ie_thread->it_thread->td_proc;
                PROC_LOCK(p);
                p->p_flag |= P_NOLOAD;
                PROC_UNLOCK(p);
        }
        return (0);
}

/*
 * Schedule a software interrupt thread.
 */
void
swi_sched(void *cookie, int flags)
{
        struct intr_handler *ih = (struct intr_handler *)cookie;
        struct intr_event *ie = ih->ih_event;
        int error;

        CTR3(KTR_INTR, "swi_sched: %s %s need=%d", ie->ie_name, ih->ih_name,
            ih->ih_need);

        /*
         * Set ih_need for this handler so that if the ithread is already
         * running it will execute this handler on the next pass.  Otherwise,
         * it will execute it the next time it runs.
         */
        atomic_store_rel_int(&ih->ih_need, 1);

        if (!(flags & SWI_DELAY)) {
                PCPU_INC(cnt.v_soft);
#ifdef INTR_FILTER
                error = intr_event_schedule_thread(ie, ie->ie_thread);
#else
                error = intr_event_schedule_thread(ie);
#endif
                KASSERT(error == 0, ("stray software interrupt"));
        }
}

/*
 * Remove a software interrupt handler.  Currently this code does not
 * remove the associated interrupt event if it becomes empty.  Calling code
 * may do so manually via intr_event_destroy(), but that's not really
 * an optimal interface.
 */
int
swi_remove(void *cookie)
{

        return (intr_event_remove_handler(cookie));
}

#ifdef INTR_FILTER
static void
priv_ithread_execute_handler(struct proc *p, struct intr_handler *ih)
{
        struct intr_event *ie;

        ie = ih->ih_event;
        /*
         * If this handler is marked for death, remove it from
         * the list of handlers and wake up the sleeper.
         */
        if (ih->ih_flags & IH_DEAD) {
                mtx_lock(&ie->ie_lock);
                TAILQ_REMOVE(&ie->ie_handlers, ih, ih_next);
                ih->ih_flags &= ~IH_DEAD;
                wakeup(ih);
                mtx_unlock(&ie->ie_lock);
                return;
        }
        
        /* Execute this handler. */
        CTR6(KTR_INTR, "%s: pid %d exec %p(%p) for %s flg=%x",
             __func__, p->p_pid, (void *)ih->ih_handler, ih->ih_argument,
             ih->ih_name, ih->ih_flags);
        
        if (!(ih->ih_flags & IH_MPSAFE))
                mtx_lock(&Giant);
        ih->ih_handler(ih->ih_argument);
        if (!(ih->ih_flags & IH_MPSAFE))
                mtx_unlock(&Giant);
}
#endif

static void
ithread_execute_handlers(struct proc *p, struct intr_event *ie)
{
        struct intr_handler *ih, *ihn;

        /* Interrupt handlers should not sleep. */
        if (!(ie->ie_flags & IE_SOFT))
                THREAD_NO_SLEEPING();
        TAILQ_FOREACH_SAFE(ih, &ie->ie_handlers, ih_next, ihn) {

                /*
                 * If this handler is marked for death, remove it from
                 * the list of handlers and wake up the sleeper.
                 */
                if (ih->ih_flags & IH_DEAD) {
                        mtx_lock(&ie->ie_lock);
                        TAILQ_REMOVE(&ie->ie_handlers, ih, ih_next);
                        ih->ih_flags &= ~IH_DEAD;
                        wakeup(ih);
                        mtx_unlock(&ie->ie_lock);
                        continue;
                }

                /* Skip filter only handlers */
                if (ih->ih_handler == NULL)
                        continue;

                /*
                 * For software interrupt threads, we only execute
                 * handlers that have their need flag set.  Hardware
                 * interrupt threads always invoke all of their handlers.
                 */
                if (ie->ie_flags & IE_SOFT) {
                        if (!ih->ih_need)
                                continue;
                        else
                                atomic_store_rel_int(&ih->ih_need, 0);
                }

                /* Execute this handler. */
                CTR6(KTR_INTR, "%s: pid %d exec %p(%p) for %s flg=%x",
                    __func__, p->p_pid, (void *)ih->ih_handler, 
                    ih->ih_argument, ih->ih_name, ih->ih_flags);

                if (!(ih->ih_flags & IH_MPSAFE))
                        mtx_lock(&Giant);
                ih->ih_handler(ih->ih_argument);
                if (!(ih->ih_flags & IH_MPSAFE))
                        mtx_unlock(&Giant);
        }
        if (!(ie->ie_flags & IE_SOFT))
                THREAD_SLEEPING_OK();

        /*
         * Interrupt storm handling:
         *
         * If this interrupt source is currently storming, then throttle
         * it to only fire the handler once  per clock tick.
         *
         * If this interrupt source is not currently storming, but the
         * number of back to back interrupts exceeds the storm threshold,
         * then enter storming mode.
         */
        if (intr_storm_threshold != 0 && ie->ie_count >= intr_storm_threshold &&
            !(ie->ie_flags & IE_SOFT)) {
                /* Report the message only once every second. */
                if (ppsratecheck(&ie->ie_warntm, &ie->ie_warncnt, 1)) {
                        printf(
        "interrupt storm detected on \"%s\"; throttling interrupt source\n",
                            ie->ie_name);
                }
                pause("istorm", 1);
        } else
                ie->ie_count++;

        /*
         * Now that all the handlers have had a chance to run, reenable
         * the interrupt source.
         */
        if (ie->ie_post_ithread != NULL)
                ie->ie_post_ithread(ie->ie_source);
}

#ifndef INTR_FILTER
/*
 * This is the main code for interrupt threads.
 */
static void
ithread_loop(void *arg)
{
        struct intr_thread *ithd;
        struct intr_event *ie;
        struct thread *td;
        struct proc *p;

        td = curthread;
        p = td->td_proc;
        ithd = (struct intr_thread *)arg;
        KASSERT(ithd->it_thread == td,
            ("%s: ithread and proc linkage out of sync", __func__));
        ie = ithd->it_event;
        ie->ie_count = 0;

        /*
         * As long as we have interrupts outstanding, go through the
         * list of handlers, giving each one a go at it.
         */
        for (;;) {
                /*
                 * If we are an orphaned thread, then just die.
                 */
                if (ithd->it_flags & IT_DEAD) {
                        CTR3(KTR_INTR, "%s: pid %d (%s) exiting", __func__,
                            p->p_pid, td->td_name);
                        free(ithd, M_ITHREAD);
                        kthread_exit();
                }

                /*
                 * Service interrupts.  If another interrupt arrives while
                 * we are running, it will set it_need to note that we
                 * should make another pass.
                 */
                while (ithd->it_need) {
                        /*
                         * This might need a full read and write barrier
                         * to make sure that this write posts before any
                         * of the memory or device accesses in the
                         * handlers.
                         */
                        atomic_store_rel_int(&ithd->it_need, 0);
                        ithread_execute_handlers(p, ie);
                }
                WITNESS_WARN(WARN_PANIC, NULL, "suspending ithread");
                mtx_assert(&Giant, MA_NOTOWNED);

                /*
                 * Processed all our interrupts.  Now get the sched
                 * lock.  This may take a while and it_need may get
                 * set again, so we have to check it again.
                 */
                thread_lock(td);
                if (!ithd->it_need && !(ithd->it_flags & IT_DEAD)) {
                        TD_SET_IWAIT(td);
                        ie->ie_count = 0;
                        mi_switch(SW_VOL | SWT_IWAIT, NULL);
                }
                thread_unlock(td);
        }
}

/*
 * Main interrupt handling body.
 *
 * Input:
 * o ie:                        the event connected to this interrupt.
 * o frame:                     some archs (i.e. i386) pass a frame to some.
 *                              handlers as their main argument.
 * Return value:
 * o 0:                         everything ok.
 * o EINVAL:                    stray interrupt.
 */
int
intr_event_handle(struct intr_event *ie, struct trapframe *frame)
{
        struct intr_handler *ih;
        struct thread *td;
        int error, ret, thread;

        td = curthread;

        /* An interrupt with no event or handlers is a stray interrupt. */
        if (ie == NULL || TAILQ_EMPTY(&ie->ie_handlers))
                return (EINVAL);

        /*
         * Execute fast interrupt handlers directly.
         * To support clock handlers, if a handler registers
         * with a NULL argument, then we pass it a pointer to
         * a trapframe as its argument.
         */
        td->td_intr_nesting_level++;
        thread = 0;
        ret = 0;
        critical_enter();
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next) {
                if (ih->ih_filter == NULL) {
                        thread = 1;
                        continue;
                }
                CTR4(KTR_INTR, "%s: exec %p(%p) for %s", __func__,
                    ih->ih_filter, ih->ih_argument == NULL ? frame :
                    ih->ih_argument, ih->ih_name);
                if (ih->ih_argument == NULL)
                        ret = ih->ih_filter(frame);
                else
                        ret = ih->ih_filter(ih->ih_argument);
                /* 
                 * Wrapper handler special handling:
                 *
                 * in some particular cases (like pccard and pccbb), 
                 * the _real_ device handler is wrapped in a couple of
                 * functions - a filter wrapper and an ithread wrapper.
                 * In this case (and just in this case), the filter wrapper 
                 * could ask the system to schedule the ithread and mask
                 * the interrupt source if the wrapped handler is composed
                 * of just an ithread handler.
                 *
                 * TODO: write a generic wrapper to avoid people rolling 
                 * their own
                 */
                if (!thread) {
                        if (ret == FILTER_SCHEDULE_THREAD)
                                thread = 1;
                }
        }

        if (thread) {
                if (ie->ie_pre_ithread != NULL)
                        ie->ie_pre_ithread(ie->ie_source);
        } else {
                if (ie->ie_post_filter != NULL)
                        ie->ie_post_filter(ie->ie_source);
        }
        
        /* Schedule the ithread if needed. */
        if (thread) {
                error = intr_event_schedule_thread(ie);
#ifndef XEN             
                KASSERT(error == 0, ("bad stray interrupt"));
#else
                if (error != 0)
                        log(LOG_WARNING, "bad stray interrupt");
#endif          
        }
        critical_exit();
        td->td_intr_nesting_level--;
        return (0);
}
#else
/*
 * This is the main code for interrupt threads.
 */
static void
ithread_loop(void *arg)
{
        struct intr_thread *ithd;
        struct intr_handler *ih;
        struct intr_event *ie;
        struct thread *td;
        struct proc *p;
        int priv;

        td = curthread;
        p = td->td_proc;
        ih = (struct intr_handler *)arg;
        priv = (ih->ih_thread != NULL) ? 1 : 0;
        ithd = (priv) ? ih->ih_thread : ih->ih_event->ie_thread;
        KASSERT(ithd->it_thread == td,
            ("%s: ithread and proc linkage out of sync", __func__));
        ie = ithd->it_event;
        ie->ie_count = 0;

        /*
         * As long as we have interrupts outstanding, go through the
         * list of handlers, giving each one a go at it.
         */
        for (;;) {
                /*
                 * If we are an orphaned thread, then just die.
                 */
                if (ithd->it_flags & IT_DEAD) {
                        CTR3(KTR_INTR, "%s: pid %d (%s) exiting", __func__,
                            p->p_pid, td->td_name);
                        free(ithd, M_ITHREAD);
                        kthread_exit();
                }

                /*
                 * Service interrupts.  If another interrupt arrives while
                 * we are running, it will set it_need to note that we
                 * should make another pass.
                 */
                while (ithd->it_need) {
                        /*
                         * This might need a full read and write barrier
                         * to make sure that this write posts before any
                         * of the memory or device accesses in the
                         * handlers.
                         */
                        atomic_store_rel_int(&ithd->it_need, 0);
                        if (priv)
                                priv_ithread_execute_handler(p, ih);
                        else 
                                ithread_execute_handlers(p, ie);
                }
                WITNESS_WARN(WARN_PANIC, NULL, "suspending ithread");
                mtx_assert(&Giant, MA_NOTOWNED);

                /*
                 * Processed all our interrupts.  Now get the sched
                 * lock.  This may take a while and it_need may get
                 * set again, so we have to check it again.
                 */
                thread_lock(td);
                if (!ithd->it_need && !(ithd->it_flags & IT_DEAD)) {
                        TD_SET_IWAIT(td);
                        ie->ie_count = 0;
                        mi_switch(SW_VOL | SWT_IWAIT, NULL);
                }
                thread_unlock(td);
        }
}

/* 
 * Main loop for interrupt filter.
 *
 * Some architectures (i386, amd64 and arm) require the optional frame 
 * parameter, and use it as the main argument for fast handler execution
 * when ih_argument == NULL.
 *
 * Return value:
 * o FILTER_STRAY:              No filter recognized the event, and no
 *                              filter-less handler is registered on this 
 *                              line.
 * o FILTER_HANDLED:            A filter claimed the event and served it.
 * o FILTER_SCHEDULE_THREAD:    No filter claimed the event, but there's at
 *                              least one filter-less handler on this line.
 * o FILTER_HANDLED | 
 *   FILTER_SCHEDULE_THREAD:    A filter claimed the event, and asked for
 *                              scheduling the per-handler ithread.
 *
 * In case an ithread has to be scheduled, in *ithd there will be a 
 * pointer to a struct intr_thread containing the thread to be
 * scheduled.
 */

static int
intr_filter_loop(struct intr_event *ie, struct trapframe *frame, 
                 struct intr_thread **ithd) 
{
        struct intr_handler *ih;
        void *arg;
        int ret, thread_only;

        ret = 0;
        thread_only = 0;
        TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next) {
                /*
                 * Execute fast interrupt handlers directly.
                 * To support clock handlers, if a handler registers
                 * with a NULL argument, then we pass it a pointer to
                 * a trapframe as its argument.
                 */
                arg = ((ih->ih_argument == NULL) ? frame : ih->ih_argument);
                
                CTR5(KTR_INTR, "%s: exec %p/%p(%p) for %s", __func__,
                     ih->ih_filter, ih->ih_handler, arg, ih->ih_name);

                if (ih->ih_filter != NULL)
                        ret = ih->ih_filter(arg);
                else {
                        thread_only = 1;
                        continue;
                }

                if (ret & FILTER_STRAY)
                        continue;
                else { 
                        *ithd = ih->ih_thread;
                        return (ret);
                }
        }

        /*
         * No filters handled the interrupt and we have at least
         * one handler without a filter.  In this case, we schedule
         * all of the filter-less handlers to run in the ithread.
         */     
        if (thread_only) {
                *ithd = ie->ie_thread;
                return (FILTER_SCHEDULE_THREAD);
        }
        return (FILTER_STRAY);
}

/*
 * Main interrupt handling body.
 *
 * Input:
 * o ie:                        the event connected to this interrupt.
 * o frame:                     some archs (i.e. i386) pass a frame to some.
 *                              handlers as their main argument.
 * Return value:
 * o 0:                         everything ok.
 * o EINVAL:                    stray interrupt.
 */
int
intr_event_handle(struct intr_event *ie, struct trapframe *frame)
{
        struct intr_thread *ithd;
        struct thread *td;
        int thread;

        ithd = NULL;
        td = curthread;

        if (ie == NULL || TAILQ_EMPTY(&ie->ie_handlers))
                return (EINVAL);

        td->td_intr_nesting_level++;
        thread = 0;
        critical_enter();
        thread = intr_filter_loop(ie, frame, &ithd);    
        if (thread & FILTER_HANDLED) {
                if (ie->ie_post_filter != NULL)
                        ie->ie_post_filter(ie->ie_source);
        } else {
                if (ie->ie_pre_ithread != NULL)
                        ie->ie_pre_ithread(ie->ie_source);
        }
        critical_exit();
        
        /* Interrupt storm logic */
        if (thread & FILTER_STRAY) {
                ie->ie_count++;
                if (ie->ie_count < intr_storm_threshold)
                        printf("Interrupt stray detection not present\n");
        }

        /* Schedule an ithread if needed. */
        if (thread & FILTER_SCHEDULE_THREAD) {
                if (intr_event_schedule_thread(ie, ithd) != 0)
                        panic("%s: impossible stray interrupt", __func__);
        }
        td->td_intr_nesting_level--;
        return (0);
}
#endif

#ifdef DDB
/*
 * Dump details about an interrupt handler
 */
static void
db_dump_intrhand(struct intr_handler *ih)
{
        int comma;

        db_printf("\t%-10s ", ih->ih_name);
        switch (ih->ih_pri) {
        case PI_REALTIME:
                db_printf("CLK ");
                break;
        case PI_AV:
                db_printf("AV  ");
                break;
        case PI_TTYHIGH:
        case PI_TTYLOW:
                db_printf("TTY ");
                break;
        case PI_TAPE:
                db_printf("TAPE");
                break;
        case PI_NET:
                db_printf("NET ");
                break;
        case PI_DISK:
        case PI_DISKLOW:
                db_printf("DISK");
                break;
        case PI_DULL:
                db_printf("DULL");
                break;
        default:
                if (ih->ih_pri >= PI_SOFT)
                        db_printf("SWI ");
                else
                        db_printf("%4u", ih->ih_pri);
                break;
        }
        db_printf(" ");
        db_printsym((uintptr_t)ih->ih_handler, DB_STGY_PROC);
        db_printf("(%p)", ih->ih_argument);
        if (ih->ih_need ||
            (ih->ih_flags & (IH_EXCLUSIVE | IH_ENTROPY | IH_DEAD |
            IH_MPSAFE)) != 0) {
                db_printf(" {");
                comma = 0;
                if (ih->ih_flags & IH_EXCLUSIVE) {
                        if (comma)
                                db_printf(", ");
                        db_printf("EXCL");
                        comma = 1;
                }
                if (ih->ih_flags & IH_ENTROPY) {
                        if (comma)
                                db_printf(", ");
                        db_printf("ENTROPY");
                        comma = 1;
                }
                if (ih->ih_flags & IH_DEAD) {
                        if (comma)
                                db_printf(", ");
                        db_printf("DEAD");
                        comma = 1;
                }
                if (ih->ih_flags & IH_MPSAFE) {
                        if (comma)
                                db_printf(", ");
                        db_printf("MPSAFE");
                        comma = 1;
                }
                if (ih->ih_need) {
                        if (comma)
                                db_printf(", ");
                        db_printf("NEED");
                }
                db_printf("}");
        }
        db_printf("\n");
}

/*
 * Dump details about a event.
 */
void
db_dump_intr_event(struct intr_event *ie, int handlers)
{
        struct intr_handler *ih;
        struct intr_thread *it;
        int comma;

        db_printf("%s ", ie->ie_fullname);
        it = ie->ie_thread;
        if (it != NULL)
                db_printf("(pid %d)", it->it_thread->td_proc->p_pid);
        else
                db_printf("(no thread)");
        if ((ie->ie_flags & (IE_SOFT | IE_ENTROPY | IE_ADDING_THREAD)) != 0 ||
            (it != NULL && it->it_need)) {
                db_printf(" {");
                comma = 0;
                if (ie->ie_flags & IE_SOFT) {
                        db_printf("SOFT");
                        comma = 1;
                }
                if (ie->ie_flags & IE_ENTROPY) {
                        if (comma)
                                db_printf(", ");
                        db_printf("ENTROPY");
                        comma = 1;
                }
                if (ie->ie_flags & IE_ADDING_THREAD) {
                        if (comma)
                                db_printf(", ");
                        db_printf("ADDING_THREAD");
                        comma = 1;
                }
                if (it != NULL && it->it_need) {
                        if (comma)
                                db_printf(", ");
                        db_printf("NEED");
                }
                db_printf("}");
        }
        db_printf("\n");

        if (handlers)
                TAILQ_FOREACH(ih, &ie->ie_handlers, ih_next)
                    db_dump_intrhand(ih);
}

/*
 * Dump data about interrupt handlers
 */
DB_SHOW_COMMAND(intr, db_show_intr)
{
        struct intr_event *ie;
        int all, verbose;

        verbose = index(modif, 'v') != NULL;
        all = index(modif, 'a') != NULL;
        TAILQ_FOREACH(ie, &event_list, ie_list) {
                if (!all && TAILQ_EMPTY(&ie->ie_handlers))
                        continue;
                db_dump_intr_event(ie, verbose);
                if (db_pager_quit)
                        break;
        }
}
#endif /* DDB */

/*
 * Start standard software interrupt threads
 */
static void
start_softintr(void *dummy)
{

        if (swi_add(NULL, "vm", swi_vm, NULL, SWI_VM, INTR_MPSAFE, &vm_ih))
                panic("died while creating vm swi ithread");
}
SYSINIT(start_softintr, SI_SUB_SOFTINTR, SI_ORDER_FIRST, start_softintr,
    NULL);

/*
 * Sysctls used by systat and others: hw.intrnames and hw.intrcnt.
 * The data for this machine dependent, and the declarations are in machine
 * dependent code.  The layout of intrnames and intrcnt however is machine
 * independent.
 *
 * We do not know the length of intrcnt and intrnames at compile time, so
 * calculate things at run time.
 */
static int
sysctl_intrnames(SYSCTL_HANDLER_ARGS)
{
        return (sysctl_handle_opaque(oidp, intrnames, eintrnames - intrnames,
           req));
}

SYSCTL_PROC(_hw, OID_AUTO, intrnames, CTLTYPE_OPAQUE | CTLFLAG_RD,
    NULL, 0, sysctl_intrnames, "", "Interrupt Names");

static int
sysctl_intrcnt(SYSCTL_HANDLER_ARGS)
{
        return (sysctl_handle_opaque(oidp, intrcnt,
            (char *)eintrcnt - (char *)intrcnt, req));
}

SYSCTL_PROC(_hw, OID_AUTO, intrcnt, CTLTYPE_OPAQUE | CTLFLAG_RD,
    NULL, 0, sysctl_intrcnt, "", "Interrupt Counts");

#ifdef DDB
/*
 * DDB command to dump the interrupt statistics.
 */
DB_SHOW_COMMAND(intrcnt, db_show_intrcnt)
{
        u_long *i;
        char *cp;

        cp = intrnames;
        for (i = intrcnt; i != eintrcnt && !db_pager_quit; i++) {
                if (*cp == '\0')
                        break;
                if (*i != 0)
                        db_printf("%s\t%lu\n", cp, *i);
                cp += strlen(cp) + 1;
        }
}
#endif