src/Makefile.windows

   1 #       FreeEMS - the open source engine management system
   2 #
   3 #       Copyright 2008, 2009 Fred Cooke
   4 #
   5 #       This Makefile is part of the FreeEMS project.
   6 #
   7 #       FreeEMS software is free software: you can redistribute it and/or modify
   8 #       it under the terms of the GNU General Public License as published by
   9 #       the Free Software Foundation, either version 3 of the License, or
  10 #       (at your option) any later version.
  11 #
  12 #       FreeEMS software is distributed in the hope that it will be useful,
  13 #       but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 #       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 #       GNU General Public License for more details.
  16 #
  17 #       You should have received a copy of the GNU General Public License
  18 #       along with any FreeEMS software.  If not, see http://www.gnu.org/licenses/
  19 #
  20 #       We ask that if you make any changes to this file you email them upstream to
  21 #       us at admin(at)diyefi(dot)org or, even better, fork the code on github.com!
  22 #
  23 #       Thank you for choosing FreeEMS to run your engine!
  24
  25
  26 #                                                                              #
  27 #   This Makefile is designed to be run with GNU make! Accept no substitute!   #
  28 #                                                                              #
  29 #                                                                              #
  30 #   Top level targets:                                                         #
  31 #                                                                              #
  32 #   make:                                                                      #
  33 #       Builds all output files in the slow multi stage way with all debugging #
  34 #   make fast:                                                                 #
  35 #       Compiles from C straight to objects, links to elfs and copies to s19s  #
  36 #   make clean:                                                                #
  37 #       Permanently removes all build artifact files and directories           #
  38 #   make release:                                                              #
  39 #       Cleans the project, builds it from scratch, copies the s19 files up to #
  40 #       the firmware directory, zips each s19 separately, zips all of the      #
  41 #       documentation, cleans the project again and lastly zips the entire     #
  42 #       project directory                                                      #
  43 #                                                                              #
  44 #                                                                              #
  45 #   When doing a full build the following steps are taken:                     #
  46 #                                                                              #
  47 #    1) Pre-process all of the C files                                         #
  48 #    2) Compile all preprocessed C files into assembly files                   #
  49 #    3) Assemble all assembly files into object files                          #
  50 #    4) Dump the contents of all object files                                  #
  51 #    5) Link one decoder with garbage collection and reporting turned on       #
  52 #    6) Link each decoder without garbage collection                           #
  53 #    7) Dump the contents of each decoders elf                                 #
  54 #    8) Produce a memory map for each elf                                      #
  55 #    9) Produce a readelf dump for each elf                                    #
  56 #   10) Produce an s19 loadable firmware file for each elf                     #
  57 #                                                                              #
  58
  59
  60
  61
  62 #                             All Fixed Variables                              #
  63
  64
  65 # Constants
  66 VERSION = 0.0.19
  67 OUTPREFIX = freeems
  68
  69 # Directories here
  70 RELEASEDIR = ../firmware
  71 INCDIR = inc
  72 BUGDIR = debug
  73 OUTDIR = output
  74 OBJDIR = objects
  75 ASMDIR = assembly
  76 S19DIR = firmware
  77 PPCDIR = preprocessedc
  78
  79 # Set the windows/non debian path first and then overwrite
  80 # with the debian one so we can grep the deb line out and
  81 # end up with a working windows make file in an automated
  82 # way. Additionally, please ensure you do not add any sets
  83 # of three .. . in a row or the line will be missing from
  84 # the windows version. Likewise sets of ### longer than 6
  85 # or so are also at risk :-)
  86 PREFIX = m6811-elf-
  87
  88 # All of the tools
  89 CP = cp
  90 RM = rm -rf
  91 ZIP = zip
  92 GCC = $(PREFIX)gcc
  93 COPY = $(PREFIX)objcopy
  94 DUMP = $(PREFIX)objdump
  95 NM = $(PREFIX)nm
  96 RE = $(PREFIX)readelf
  97 SIZE = $(PREFIX)size
  98
  99
 100
 101
 102 #                               All Source Files                               #
 103
 104
 105 # Indirect dependencies - any header change means a full recompile. This can be improved upon and made more specific.
 106 MAINH = main.h
 107 INITH = init.h
 108 UTILH = utils.h
 109 MFILE = Makefile
 110 ISRH = interrupts.h
 111 CINCS = injectorISR.c
 112 FLASHH = flashWrite.h
 113 ASMH = 9S12XDP512asm.s
 114 LOOKUPH = tableLookup.h
 115 WMFILE = Makefile.windows
 116 ISRSH = commsISRs.h injectionISRs.h
 117 COMMSH = commsCore.h blockDetailsLookup.h
 118 LINKER = memory.x regions.x hc9s12xdp512elfb.x
 119 GLOBALH1 = freeEMS.h 9S12XDP512.h memory.h globalConstants.h structs.h
 120 GLOBALH2 = globalDefines.h errorDefines.h TunableConfigs.h FixedConfigs.h
 121 FUELH = fuelAndIgnitionCalcs.h derivedVarsGenerator.h coreVarsGenerator.h
 122 RPMH = NipponDenso.h LT1-360-8.h Subaru-36-2-2-2.h MissingTeeth.h MiataNB.h
 123
 124 # Let's keep this to a bare minimum! If you write ASM code
 125 # please provide an matching alternate C implementation too.
 126 HANDASMS = flashBurn.s
 127 #RPMHANDASMS =
 128
 129 # .c files from inc/ should be included here as deps for the parts they are relied on by!!
 130 ALLHEADERS = $(GLOBALH1) $(GLOBALH2) $(COMMSH) $(ISRSH) $(UTILH) $(FUELH) $(MAINH) $(INITH) $(ISRH) $(FLASHH) $(LOOKUPH) $(RPMH)
 131 ALLH = $(patsubst %.h,$(INCDIR)/%.h,$(ALLHEADERS)) $(LINKER) $(MFILE) $(patsubst %.c,$(INCDIR)/%.c,$(CINCS)) $(INCDIR)/$(ASMH)
 132
 133 # Warning : do not include .c files from inc/ as they are included into the other C files and automatically compiled.
 134
 135 # Flash data files
 136 FIXEDCLASSES = FixedConfig1.c FixedConfig2.c
 137 LOOKUPCLASSES1 = IATTransferTable.c CHTTransferTable.c
 138 LOOKUPCLASSES2 = MAFTransferTable.c TestTransferTable.c
 139 FUELCLASSES = FuelTables.c FuelTables2.c
 140 TIMECLASSES = TimingTables.c TimingTables2.c
 141 TUNECLASSES = TunableConfig.c TunableConfig2.c
 142
 143 # Source code files
 144 UTILCLASSES = tableLookup.c init.c utils.c globalConstants.c
 145 MATHCLASSES = coreVarsGenerator.c derivedVarsGenerator.c fuelAndIgnitionCalcs.c
 146 COMCLASSES = flashWrite.c commsCore.c blockDetailsLookup.c
 147 ISRCLASSES = interrupts.c injectionISRs.c ignitionISRs.c commsISRs.c realtimeISRs.c miscISRs.c
 148
 149 # All but the engine position/RPM combined here
 150 SOURCE = freeEMS.c staticInit.c main.c $(UTILCLASSES) $(MATHCLASSES) $(COMCLASSES) $(ISRCLASSES)
 151 DATA = $(FIXEDCLASSES) $(LOOKUPCLASSES1) $(LOOKUPCLASSES2) $(FUELCLASSES) $(TIMECLASSES) $(TUNECLASSES)
 152 CLASSES = $(SOURCE) $(DATA)
 153
 154 # Engine position/RPM here
 155 RPMCLASSES = NipponDenso.c LT1-360-8.c Subaru-36-2-2-2.c MissingTeeth.c MiataNB.c
 156
 157
 158 # Convert extensions
 159 PREPROCESSED = $(patsubst %.c,$(PPCDIR)/%.pp.c,$(CLASSES))
 160 ASSEMBLIES = $(patsubst %.c,$(ASMDIR)/%.s,$(CLASSES))
 161 OBJECTS = $(patsubst %.c,$(OBJDIR)/%.o,$(CLASSES)) $(patsubst %.s,$(OBJDIR)/%.o,$(HANDASMS))
 162 DUMPS = $(patsubst %.c,$(BUGDIR)/%.dmp,$(CLASSES)) $(patsubst %.s,$(BUGDIR)/%.dmp,$(HANDASMS))
 163
 164 # Convert RPM extensions
 165 PREPROCESSEDRPM = $(patsubst %.c,$(PPCDIR)/%.pp.c,$(RPMCLASSES))
 166 ASSEMBLIESRPM = $(patsubst %.c,$(ASMDIR)/%.s,$(RPMCLASSES))
 167 OBJECTSRPM = $(patsubst %.c,$(OBJDIR)/%.o,$(RPMCLASSES)) #$(patsubst %.s,$(OBJDIR)/%.o,$(RPMHANDASMS))
 168 DUMPSRPM = $(patsubst %.c,$(BUGDIR)/%.dmp,$(RPMCLASSES)) #$(patsubst %.s,$(BUGDIR)/%.dmp,$(RPMHANDASMS))
 169
 170 # Convert to output files
 171 ALLELFS = $(patsubst %.c,$(OUTDIR)/$(OUTPREFIX)-$(VERSION)-%.elf,$(RPMCLASSES)) #$(patsubst %.s,$(OUTDIR)/$(OUTPREFIX)-$(VERSION)-%.elf,$(RPMHANDASMS))
 172 ALLDMPS = $(patsubst %.c,$(BUGDIR)/$(OUTPREFIX)-$(VERSION)-%.dmp,$(RPMCLASSES)) #$(patsubst %.s,$(BUGDIR)/$(OUTPREFIX)-$(VERSION)-%.dmp,$(RPMHANDASMS))
 173 ALLMAPS = $(patsubst %.c,$(BUGDIR)/$(OUTPREFIX)-$(VERSION)-%.map,$(RPMCLASSES)) #$(patsubst %.s,$(BUGDIR)/$(OUTPREFIX)-$(VERSION)-%.map,$(RPMHANDASMS))
 174 ALLREAD = $(patsubst %.c,$(BUGDIR)/$(OUTPREFIX)-$(VERSION)-%.ree,$(RPMCLASSES)) #$(patsubst %.s,$(BUGDIR)/$(OUTPREFIX)-$(VERSION)-%.ree,$(RPMHANDASMS))
 175 ALLS19S = $(patsubst %.c,$(S19DIR)/$(OUTPREFIX)-$(VERSION)-%.s19,$(RPMCLASSES)) #$(patsubst %.s,$(S19DIR)/$(OUTPREFIX)-$(VERSION)-%.s19,$(RPMHANDASMS))
 176
 177 # Convert to output files for GC variants
 178 GCDELFS = $(patsubst %.c,$(OUTDIR)/$(OUTPREFIX)-$(VERSION)-%.gc.elf,$(RPMCLASSES)) #$(patsubst %.s,$(OUTDIR)/$(OUTPREFIX)-$(VERSION)-%.gc.elf,$(RPMHANDASMS))
 179 GCDS19S = $(patsubst %.c,$(S19DIR)/$(OUTPREFIX)-$(VERSION)-%.gc.s19,$(RPMCLASSES)) #$(patsubst %.s,$(S19DIR)/$(OUTPREFIX)-$(VERSION)-%.gc.s19,$(RPMHANDASMS))
 180
 181
 182
 183
 184 #                           All Command Line Options                           #
 185
 186
 187 # M68hc1x GCC Options we may want : -minmax  -mlong-calls
 188
 189 # http://www.gnu.org/software/m68hc11/m68hc11_gcc.html shows code size with different options used
 190 # include debug info, optimise , 16 bit ints, hcs12 platform
 191 GCCOPTS = -g -Wall -Werror -Winline -O -m68hcs12 -mshort -ffunction-sections -fomit-frame-pointer -msoft-reg-count=8 -mauto-incdec -fsigned-char
 192 # -ffunction-sections option splits out the functions such that the garbage collection can get
 193 # them on a per section basis. I'm not sure, but this could be harmful to paged code so may
 194 # have to review this at a later date perhaps splitting paged functions from nonpaged ones.
 195
 196 # pass to linker, link for hc12
 197 # The vectors address in the linker options is the VMA address and must be short form 0xF710, not a paged address.
 198 LINKOPTS = -Wl,-defsym,vectors_addr=0xF710,-m,m68hc12elfb,-T,hc9s12xdp512elfb.x
 199 LINKOPTSGC = -Wl,--gc-sections,--print-gc-sections,-defsym,vectors_addr=0xF710,-m,m68hc12elfb,-T,hc9s12xdp512elfb.x
 200 # Use this to get a map dump when the linker fails in a confusing way :
 201 #LINKOPTSGC = -Wl,--print-map,--gc-sections,--print-gc-sections,-defsym,vectors_addr=0xF710,-m,m68hc12elfb,-T,hc9s12xdp512elfb.x
 202
 203 # If using the below option for paged flash, the ADDRESS_TYPE field in the freeEMSloader script should be updated to match.
 204 # --change-section-lma .ppagePP=0xPP8000 \ (where PP = the ppage value for that page of flash) OR if using linear address per formula
 205 COPYOPTS =  --output-target=srec \
 206                 --change-section-lma .fixedconf1+0xFD4000 \
 207                 --change-section-lma .fixedconf2+0xFD4000 \
 208                      --change-section-lma .text1+0xFD4000 \
 209                       --change-section-lma .text+0xFEC000 \
 210                       --change-section-lma .data+0xFEC000 \
 211                    --change-section-lma .vectors+0xFEC000 \
 212                     --change-section-lma .rodata+0xFEC000 \
 213                 --only-section=.fixedconf1 \
 214                 --only-section=.fixedconf2 \
 215                 --only-section=.text \
 216                 --only-section=.text1 \
 217                 --only-section=.data \
 218                 --only-section=.vectors \
 219                 --only-section=.rodata \
 220                 --change-section-lma .ppageF8=0xF88000 \
 221                 --change-section-lma .fpageF9=0xF98000 \
 222                 --change-section-lma .dpageF9=0xF9A000 \
 223                 --change-section-lma .ppageFE=0xFE8000 \
 224                 --only-section=.ppageF8 \
 225                 --only-section=.fpageF9 \
 226                 --only-section=.dpageF9 \
 227                 --only-section=.ppageFE \
 228                 --change-section-lma .fpageFA=0xFA8000 \
 229                 --change-section-lma .dpageFA=0xFAA000 \
 230                 --change-section-lma .fpageFB=0xFB8000 \
 231                 --change-section-lma .dpageFB1=0xFBA000 \
 232                 --change-section-lma .dpageFB2=0xFBA400 \
 233                 --change-section-lma .dpageFB3=0xFBA800 \
 234                 --change-section-lma .dpageFB4=0xFBAC00 \
 235                 --change-section-lma .dpageFB5=0xFBB000 \
 236                 --change-section-lma .dpageFB6=0xFBB400 \
 237                 --change-section-lma .dpageFB7=0xFBB800 \
 238                 --change-section-lma .dpageFB8=0xFBBC00 \
 239                 --change-section-lma .fpageFC=0xFC8000 \
 240                 --change-section-lma .dpageFC=0xFCA000 \
 241                 --only-section=.dpageFA \
 242                 --only-section=.fpageFA \
 243                 --only-section=.dpageFB1 \
 244                 --only-section=.dpageFB2 \
 245                 --only-section=.dpageFB3 \
 246                 --only-section=.dpageFB4 \
 247                 --only-section=.dpageFB5 \
 248                 --only-section=.dpageFB6 \
 249                 --only-section=.dpageFB7 \
 250                 --only-section=.dpageFB8 \
 251                 --only-section=.fpageFB \
 252                 --only-section=.dpageFC \
 253                 --only-section=.fpageFC
 254 #               --change-section-lma .ppageFD=0xFD8000 \
 255 #               --change-section-lma .ppageFF=0xFF8000 \
 256 #               --only-section=.ppageFD \       This is left here for clarity only (equivalent to text1 but paged)
 257 #               --only-section=.ppageFF         This is left here for clarity only (equivalent to text but paged)
 258 # Changes to the above options should be reflected in memory.x and memory.h also!
 259
 260 # The following flash areas can only be used once Sean has written his loader app :
 261 #               --only-section=.ppageE0 \
 262 #               --only-section=.ppageE1 \
 263 #               --only-section=.ppageE2 \
 264 #               --only-section=.ppageE3 \
 265 #               --only-section=.ppageE4 \
 266 #               --only-section=.ppageE5 \
 267 #               --only-section=.ppageE6 \
 268 #               --only-section=.ppageE7 \
 269 #               --only-section=.ppageE8 \
 270 #               --only-section=.ppageE9 \
 271 #               --only-section=.ppageEA \
 272 #               --only-section=.ppageEB \
 273 #               --only-section=.ppageEC \
 274 #               --only-section=.ppageED \
 275 #               --only-section=.ppageEE \
 276 #               --only-section=.ppageEF \
 277 #               --only-section=.ppageF0 \
 278 #               --only-section=.ppageF1 \
 279 #               --only-section=.ppageF2 \
 280 #               --only-section=.ppageF3 \
 281 #               --only-section=.ppageF4 \
 282 #               --only-section=.ppageF5 \
 283 #               --only-section=.ppageF6 \
 284 #               --only-section=.ppageF7 \
 285 #               --change-section-lma .ppageE0=0xE08000 \
 286 #               --change-section-lma .ppageE1=0xE18000 \
 287 #               --change-section-lma .ppageE2=0xE28000 \
 288 #               --change-section-lma .ppageE3=0xE38000 \
 289 #               --change-section-lma .ppageE4=0xE48000 \
 290 #               --change-section-lma .ppageE5=0xE58000 \
 291 #               --change-section-lma .ppageE6=0xE68000 \
 292 #               --change-section-lma .ppageE7=0xE78000 \
 293 #               --change-section-lma .ppageE8=0xE88000 \
 294 #               --change-section-lma .ppageE9=0xE98000 \
 295 #               --change-section-lma .ppageEA=0xEA8000 \
 296 #               --change-section-lma .ppageEB=0xEB8000 \
 297 #               --change-section-lma .ppageEC=0xEC8000 \
 298 #               --change-section-lma .ppageED=0xED8000 \
 299 #               --change-section-lma .ppageEE=0xEE8000 \
 300 #               --change-section-lma .ppageEF=0xEF8000 \
 301 #               --change-section-lma .ppageF0=0xF08000 \
 302 #               --change-section-lma .ppageF1=0xF18000 \
 303 #               --change-section-lma .ppageF2=0xF28000 \
 304 #               --change-section-lma .ppageF3=0xF38000 \
 305 #               --change-section-lma .ppageF4=0xF48000 \
 306 #               --change-section-lma .ppageF5=0xF58000 \
 307 #               --change-section-lma .ppageF6=0xF68000 \
 308 #               --change-section-lma .ppageF7=0xF78000 \
 309
 310
 311
 312
 313 #                        Dependency And Target Summary                         #
 314 #                                                                              #
 315 #   Top level targets:                                                         #
 316 #                                                                              #
 317 #       1) all                                                                 #
 318 #       2) fast                                                                #
 319 #       3) install                                                             #
 320 #       4) release                                                             #
 321 #       5) clean                                                               #
 322 #                                                                              #
 323 #   Second level targets:                                                      #
 324 #                                                                              #
 325 #       1) nonrpm:                                                             #
 326 #                                                                              #
 327 #           1) preprocess [list] Generate preprocessed C from sources          #
 328 #           2) assemble   [list] Generate assembly from preprocessed C         #
 329 #           3) compile    [list] Generate object files from assembly           #
 330 #                                                                              #
 331 #       2) rpm:                                                                #
 332 #                                                                              #
 333 #           1) preprocessrpm [list] Generate preprocessed C from sources       #
 334 #           2) assemblerpm   [list] Generate assembly from preprocessed C      #
 335 #           3) compilerpm    [list] Generate object files from assembly        #
 336 #                                                                              #
 337 #       3) final:                                                              #
 338 #                                                                              #
 339 #           1) link [list] Generate ELFs objects                               #
 340 #           2) copy [list] s19s from elfs                                      #
 341 #                                                                              #
 342 #       4) debug:                                                              #
 343 #                                                                              #
 344 #           1) link      [list] Generate ELFs objects                          #
 345 #           2) dump      [list] dumpslarge from elfs                           #
 346 #           3) map       [list] mapslarge from elfs                            #
 347 #           4) read      [list] relarge from elfs                              #
 348 #           5) dumpsmall [list] dumpsall from obj + rpmobj                     #
 349 #                                                                              #
 350 #        release : md5sum, export, zip, copy, docs, etc                                                                      #
 351 #                                                                              #
 352
 353
 354
 355
 356 #                           All Target Dependencies                            #
 357
 358
 359 # Build everything the long way (default)
 360 all: s19
 361
 362 # Build minimally and quickly
 363 fast: lessthings here
 364
 365 # Load the s19 of your choice
 366 install: clean fast loader
 367
 368 # Perform a release
 369 release: clean cleanrelease fast someMoreStuffHere
 370
 371 clean: cleanasm cleanobj cleanout cleanppc cleans19 cleandebug
 372
 373 final: link copy
 374
 375 debug: dump map read dumpsmall
 376
 377
 378
 379
 380 #                       Link and Copy Target Definitions                       #
 381
 382
 383
 384 link: assemble $(OUTDIR) $(ALLELFS)
 385
 386 # link the object files into an elf executable
 387 $(ALLELFS): $(OUTDIR)/$(OUTPREFIX)-$(VERSION)-%.elf: $(OBJDIR)/%.o $(OBJECTS)
 388         $(GCC) $(GCCOPTS) $(LINKOPTS) -o $@ $< $(OBJECTS)
 389
 390
 391
 392
 393
 394
 395
 396 s19: link $(S19DIR) $(ALLS19S)
 397 # the gc dependency is temporary until i figure out if the .tramp removal is an issue or not.
 398
 399 # Generate the loadable s19 firmware files
 400 $(ALLS19S): $(S19DIR)/%.s19: $(OUTDIR)/%.elf
 401         $(COPY) $(COPYOPTS) $< $@
 402
 403
 404
 405
 406
 407
 408
 409 size: # TODO this should be run for each s19 target with only the one rpm .o file
 410         $(SIZE) -t $(OBJECTS)
 411
 412
 413
 414
 415
 416 #              Preprocess, Compile and Assemble Target Definitions             #
 417
 418
 419
 420 preprocess: $(PPCDIR) $(PREPROCESSED) $(PREPROCESSEDRPM)
 421
 422 # Generate preprocessed source files to examine
 423 $(PREPROCESSED) $(PREPROCESSEDRPM): $(PPCDIR)/%.pp.c: %.c $(ALLH)
 424         $(GCC) $(GCCOPTS) -E $< > $@
 425
 426
 427
 428 compile: preprocess $(ASSEMBLIES) $(ASSEMBLIESRPM)
 429
 430 # Generate assembly files to examine
 431 $(ASSEMBLIES) $(ASSEMBLIESRPM): $(ASMDIR)/%.s: $(PPCDIR)/%.pp.c
 432         $(GCC) $(GCCOPTS) -x cpp-output -S -o $@ $<
 433
 434
 435
 436 assemble: compile $(OBJDIR) $(OBJECTS) $(OBJECTSRPM)
 437
 438 # Generate object files to link
 439 $(OBJECTS) $(OBJECTSRPM): $(OBJDIR)/%.o: $(ASMDIR)/%.s
 440         $(GCC) $(GCCOPTS) -c -o $@ $<
 441
 442
 443
 444
 445 #                     Release Procedure Target Definitions                     #
 446
 447 ### clean all
 448
 449 #check git status for changes, fail build if not fully commited
 450
 451 ### build all
 452
 453 #copy s19s up
 454
 455 #md5sum s19s above
 456
 457 ### clean all
 458
 459 #git commit s19s
 460
 461 #zip each s19 to parent
 462
 463 #zip docs to parent
 464
 465 #zip without docs to parent
 466
 467 #zip entire directory to parent
 468
 469
 470
 471
 472 #                     Create Directory Target Definitions                      #
 473
 474 # Assembly, release and inc directories don't get removed.
 475
 476 $(BUGDIR):
 477         mkdir -p $(BUGDIR)
 478
 479 $(S19DIR):
 480         mkdir -p $(S19DIR)
 481
 482 $(PPCDIR):
 483         mkdir -p $(PPCDIR)
 484
 485 $(OUTDIR):
 486         mkdir -p $(OUTDIR)
 487
 488 $(OBJDIR):
 489         mkdir -p $(OBJDIR)
 490
 491
 492
 493
 494 #                            Clean Target Definitions                          #
 495
 496 cleanasm:
 497         $(RM) $(ASSEMBLIES) $(ASSEMBLIESRPM)
 498
 499 cleanppc:
 500         $(RM) $(PPCDIR)
 501
 502 cleanobj:
 503         $(RM) $(OBJDIR)
 504
 505 cleanout:
 506         $(RM) $(OUTDIR)
 507
 508 cleans19:
 509         $(RM) $(S19DIR)
 510
 511 cleandebug:
 512         $(RM) $(DEBUGDIR)
 513
 514 cleanrelease:
 515         $(RM) $(RELEASEDIR)/*
 516
 517
 518
 519
 520 #                   Declare targets that aren't real files                     #
 521
 522
 523 # Top level
 524 .PHONY: all fast release clean
 525 # Second level
 526 .PHONY: rpm nonrpm final debug
 527 ## Third level
 528 .PHONY: preprocess assemble compile
 529 # Comments
 530 .PHONY: etc etc etc
 531 # Clean targets
 532 .PHONY: cleanasm cleandebug cleanobj cleanout cleanppc cleanrelease cleans19