include/elf/xtensa.h

   1 /* Xtensa ELF support for BFD.
   2    Copyright 2003, 2004, 2007, 2008 Free Software Foundation, Inc.
   3    Contributed by Bob Wilson (bwilson@tensilica.com) at Tensilica.
   4
   5    This file is part of BFD, the Binary File Descriptor library.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 2 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program; if not, write to the Free Software
  19    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301,
  20    USA.  */
  21
  22 /* This file holds definitions specific to the Xtensa ELF ABI.  */
  23
  24 #ifndef _ELF_XTENSA_H
  25 #define _ELF_XTENSA_H
  26
  27 #include "elf/reloc-macros.h"
  28
  29 /* Relocations.  */
  30 START_RELOC_NUMBERS (elf_xtensa_reloc_type)
  31      RELOC_NUMBER (R_XTENSA_NONE, 0)
  32      RELOC_NUMBER (R_XTENSA_32, 1)
  33      RELOC_NUMBER (R_XTENSA_RTLD, 2)
  34      RELOC_NUMBER (R_XTENSA_GLOB_DAT, 3)
  35      RELOC_NUMBER (R_XTENSA_JMP_SLOT, 4)
  36      RELOC_NUMBER (R_XTENSA_RELATIVE, 5)
  37      RELOC_NUMBER (R_XTENSA_PLT, 6)
  38      RELOC_NUMBER (R_XTENSA_OP0, 8)
  39      RELOC_NUMBER (R_XTENSA_OP1, 9)
  40      RELOC_NUMBER (R_XTENSA_OP2, 10)
  41      RELOC_NUMBER (R_XTENSA_ASM_EXPAND, 11)
  42      RELOC_NUMBER (R_XTENSA_ASM_SIMPLIFY, 12)
  43      RELOC_NUMBER (R_XTENSA_32_PCREL, 14)
  44      RELOC_NUMBER (R_XTENSA_GNU_VTINHERIT, 15)
  45      RELOC_NUMBER (R_XTENSA_GNU_VTENTRY, 16)
  46      RELOC_NUMBER (R_XTENSA_DIFF8, 17)
  47      RELOC_NUMBER (R_XTENSA_DIFF16, 18)
  48      RELOC_NUMBER (R_XTENSA_DIFF32, 19)
  49      RELOC_NUMBER (R_XTENSA_SLOT0_OP, 20)
  50      RELOC_NUMBER (R_XTENSA_SLOT1_OP, 21)
  51      RELOC_NUMBER (R_XTENSA_SLOT2_OP, 22)
  52      RELOC_NUMBER (R_XTENSA_SLOT3_OP, 23)
  53      RELOC_NUMBER (R_XTENSA_SLOT4_OP, 24)
  54      RELOC_NUMBER (R_XTENSA_SLOT5_OP, 25)
  55      RELOC_NUMBER (R_XTENSA_SLOT6_OP, 26)
  56      RELOC_NUMBER (R_XTENSA_SLOT7_OP, 27)
  57      RELOC_NUMBER (R_XTENSA_SLOT8_OP, 28)
  58      RELOC_NUMBER (R_XTENSA_SLOT9_OP, 29)
  59      RELOC_NUMBER (R_XTENSA_SLOT10_OP, 30)
  60      RELOC_NUMBER (R_XTENSA_SLOT11_OP, 31)
  61      RELOC_NUMBER (R_XTENSA_SLOT12_OP, 32)
  62      RELOC_NUMBER (R_XTENSA_SLOT13_OP, 33)
  63      RELOC_NUMBER (R_XTENSA_SLOT14_OP, 34)
  64      RELOC_NUMBER (R_XTENSA_SLOT0_ALT, 35)
  65      RELOC_NUMBER (R_XTENSA_SLOT1_ALT, 36)
  66      RELOC_NUMBER (R_XTENSA_SLOT2_ALT, 37)
  67      RELOC_NUMBER (R_XTENSA_SLOT3_ALT, 38)
  68      RELOC_NUMBER (R_XTENSA_SLOT4_ALT, 39)
  69      RELOC_NUMBER (R_XTENSA_SLOT5_ALT, 40)
  70      RELOC_NUMBER (R_XTENSA_SLOT6_ALT, 41)
  71      RELOC_NUMBER (R_XTENSA_SLOT7_ALT, 42)
  72      RELOC_NUMBER (R_XTENSA_SLOT8_ALT, 43)
  73      RELOC_NUMBER (R_XTENSA_SLOT9_ALT, 44)
  74      RELOC_NUMBER (R_XTENSA_SLOT10_ALT, 45)
  75      RELOC_NUMBER (R_XTENSA_SLOT11_ALT, 46)
  76      RELOC_NUMBER (R_XTENSA_SLOT12_ALT, 47)
  77      RELOC_NUMBER (R_XTENSA_SLOT13_ALT, 48)
  78      RELOC_NUMBER (R_XTENSA_SLOT14_ALT, 49)
  79      RELOC_NUMBER (R_XTENSA_TLSDESC_FN, 50)
  80      RELOC_NUMBER (R_XTENSA_TLSDESC_ARG, 51)
  81      RELOC_NUMBER (R_XTENSA_TLS_DTPOFF, 52)
  82      RELOC_NUMBER (R_XTENSA_TLS_TPOFF, 53)
  83      RELOC_NUMBER (R_XTENSA_TLS_FUNC, 54)
  84      RELOC_NUMBER (R_XTENSA_TLS_ARG, 55)
  85      RELOC_NUMBER (R_XTENSA_TLS_CALL, 56)
  86 END_RELOC_NUMBERS (R_XTENSA_max)
  87
  88 /* Processor-specific flags for the ELF header e_flags field.  */
  89
  90 /* Four-bit Xtensa machine type field.  */
  91 #define EF_XTENSA_MACH                  0x0000000f
  92
  93 /* Various CPU types.  */
  94 #define E_XTENSA_MACH                   0x00000000
  95
  96 /* Leave bits 0xf0 alone in case we ever have more than 16 cpu types.
  97    Highly unlikely, but what the heck.  */
  98
  99 #define EF_XTENSA_XT_INSN               0x00000100
 100 #define EF_XTENSA_XT_LIT                0x00000200
 101
 102
 103 /* Processor-specific dynamic array tags.  */
 104
 105 /* Offset of the table that records the GOT location(s).  */
 106 #define DT_XTENSA_GOT_LOC_OFF           0x70000000
 107
 108 /* Number of entries in the GOT location table.  */
 109 #define DT_XTENSA_GOT_LOC_SZ            0x70000001
 110
 111
 112 /* Definitions for instruction and literal property tables.  The
 113    tables for ".gnu.linkonce.*" sections are placed in the following
 114    sections:
 115
 116    instruction tables:  .gnu.linkonce.x.*
 117    literal tables:      .gnu.linkonce.p.*
 118 */
 119
 120 #define XTENSA_INSN_SEC_NAME ".xt.insn"
 121 #define XTENSA_LIT_SEC_NAME  ".xt.lit"
 122 #define XTENSA_PROP_SEC_NAME ".xt.prop"
 123
 124 typedef struct property_table_entry_t
 125 {
 126   bfd_vma address;
 127   bfd_vma size;
 128   flagword flags;
 129 } property_table_entry;
 130
 131 /* Flags in the property tables to specify whether blocks of memory are
 132    literals, instructions, data, or unreachable.  For instructions,
 133    blocks that begin loop targets and branch targets are designated.
 134    Blocks that do not allow density instructions, instruction reordering
 135    or transformation are also specified.  Finally, for branch targets,
 136    branch target alignment priority is included.  Alignment of the next
 137    block is specified in the current block and the size of the current
 138    block does not include any fill required to align to the next
 139    block.  */
 140
 141 #define XTENSA_PROP_LITERAL             0x00000001
 142 #define XTENSA_PROP_INSN                0x00000002
 143 #define XTENSA_PROP_DATA                0x00000004
 144 #define XTENSA_PROP_UNREACHABLE         0x00000008
 145 /* Instruction-only properties at beginning of code. */
 146 #define XTENSA_PROP_INSN_LOOP_TARGET    0x00000010
 147 #define XTENSA_PROP_INSN_BRANCH_TARGET  0x00000020
 148 /* Instruction-only properties about code. */
 149 #define XTENSA_PROP_INSN_NO_DENSITY     0x00000040
 150 #define XTENSA_PROP_INSN_NO_REORDER     0x00000080
 151 /* Historically, NO_TRANSFORM was a property of instructions,
 152    but it should apply to literals under certain circumstances.  */
 153 #define XTENSA_PROP_NO_TRANSFORM        0x00000100
 154
 155 /*  Branch target alignment information.  This transmits information
 156     to the linker optimization about the priority of aligning a
 157     particular block for branch target alignment: None, low priority,
 158     high priority, or required.  These only need to be checked in
 159     instruction blocks marked as XTENSA_PROP_INSN_BRANCH_TARGET.
 160     Common usage is:
 161
 162     switch (GET_XTENSA_PROP_BT_ALIGN(flags))
 163     case XTENSA_PROP_BT_ALIGN_NONE:
 164     case XTENSA_PROP_BT_ALIGN_LOW:
 165     case XTENSA_PROP_BT_ALIGN_HIGH:
 166     case XTENSA_PROP_BT_ALIGN_REQUIRE:
 167 */
 168 #define XTENSA_PROP_BT_ALIGN_MASK       0x00000600
 169
 170 /* No branch target alignment.  */
 171 #define XTENSA_PROP_BT_ALIGN_NONE       0x0
 172 /* Low priority branch target alignment.  */
 173 #define XTENSA_PROP_BT_ALIGN_LOW        0x1
 174 /* High priority branch target alignment. */
 175 #define XTENSA_PROP_BT_ALIGN_HIGH       0x2
 176 /* Required branch target alignment.  */
 177 #define XTENSA_PROP_BT_ALIGN_REQUIRE    0x3
 178
 179 #define GET_XTENSA_PROP_BT_ALIGN(flag) \
 180   (((unsigned)((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9)
 181 #define SET_XTENSA_PROP_BT_ALIGN(flag, align) \
 182   (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \
 183     (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK))
 184
 185 /* Alignment is specified in the block BEFORE the one that needs
 186    alignment.  Up to 5 bits.  Use GET_XTENSA_PROP_ALIGNMENT(flags) to
 187    get the required alignment specified as a power of 2.  Use
 188    SET_XTENSA_PROP_ALIGNMENT(flags, pow2) to set the required
 189    alignment.  Be careful of side effects since the SET will evaluate
 190    flags twice.  Also, note that the SIZE of a block in the property
 191    table does not include the alignment size, so the alignment fill
 192    must be calculated to determine if two blocks are contiguous.
 193    TEXT_ALIGN is not currently implemented but is a placeholder for a
 194    possible future implementation.  */
 195
 196 #define XTENSA_PROP_ALIGN               0x00000800
 197
 198 #define XTENSA_PROP_ALIGNMENT_MASK      0x0001f000
 199
 200 #define GET_XTENSA_PROP_ALIGNMENT(flag) \
 201   (((unsigned)((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12)
 202 #define SET_XTENSA_PROP_ALIGNMENT(flag, align) \
 203   (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \
 204     (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK))
 205
 206 #define XTENSA_PROP_INSN_ABSLIT        0x00020000
 207
 208 #endif /* _ELF_XTENSA_H */