1 #define USE_THE_REPOSITORY_VARIABLE
3 #include "git-compat-util.h"
5 #include "pack-revindex.h"
6 #include "object-file.h"
7 #include "object-store-ll.h"
13 #include "csum-file.h"
15 struct revindex_entry
{
21 * Pack index for existing packs give us easy access to the offsets into
22 * corresponding pack file where each object's data starts, but the entries
23 * do not store the size of the compressed representation (uncompressed
24 * size is easily available by examining the pack entry header). It is
25 * also rather expensive to find the sha1 for an object given its offset.
27 * The pack index file is sorted by object name mapping to offset;
28 * this revindex array is a list of offset/index_nr pairs
29 * ordered by offset, so if you know the offset of an object, next offset
30 * is where its packed representation ends and the index_nr can be used to
31 * get the object sha1 from the main index.
35 * This is a least-significant-digit radix sort.
37 * It sorts each of the "n" items in "entries" by its offset field. The "max"
38 * parameter must be at least as large as the largest offset in the array,
39 * and lets us quit the sort early.
41 static void sort_revindex(struct revindex_entry
*entries
, unsigned n
, off_t max
)
44 * We use a "digit" size of 16 bits. That keeps our memory
45 * usage reasonable, and we can generally (for a 4G or smaller
46 * packfile) quit after two rounds of radix-sorting.
48 #define DIGIT_SIZE (16)
49 #define BUCKETS (1 << DIGIT_SIZE)
51 * We want to know the bucket that a[i] will go into when we are using
52 * the digit that is N bits from the (least significant) end.
54 #define BUCKET_FOR(a, i, bits) (((a)[(i)].offset >> (bits)) & (BUCKETS-1))
57 * We need O(n) temporary storage. Rather than do an extra copy of the
58 * partial results into "entries", we sort back and forth between the
59 * real array and temporary storage. In each iteration of the loop, we
60 * keep track of them with alias pointers, always sorting from "from"
63 struct revindex_entry
*tmp
, *from
, *to
;
67 ALLOC_ARRAY(pos
, BUCKETS
);
73 * If (max >> bits) is zero, then we know that the radix digit we are
74 * on (and any higher) will be zero for all entries, and our loop will
75 * be a no-op, as everybody lands in the same zero-th bucket.
77 for (bits
= 0; max
>> bits
; bits
+= DIGIT_SIZE
) {
80 memset(pos
, 0, BUCKETS
* sizeof(*pos
));
83 * We want pos[i] to store the index of the last element that
84 * will go in bucket "i" (actually one past the last element).
85 * To do this, we first count the items that will go in each
86 * bucket, which gives us a relative offset from the last
87 * bucket. We can then cumulatively add the index from the
88 * previous bucket to get the true index.
90 for (i
= 0; i
< n
; i
++)
91 pos
[BUCKET_FOR(from
, i
, bits
)]++;
92 for (i
= 1; i
< BUCKETS
; i
++)
96 * Now we can drop the elements into their correct buckets (in
97 * our temporary array). We iterate the pos counter backwards
98 * to avoid using an extra index to count up. And since we are
99 * going backwards there, we must also go backwards through the
100 * array itself, to keep the sort stable.
102 * Note that we use an unsigned iterator to make sure we can
103 * handle 2^32-1 objects, even on a 32-bit system. But this
104 * means we cannot use the more obvious "i >= 0" loop condition
105 * for counting backwards, and must instead check for
106 * wrap-around with UINT_MAX.
108 for (i
= n
- 1; i
!= UINT_MAX
; i
--)
109 to
[--pos
[BUCKET_FOR(from
, i
, bits
)]] = from
[i
];
112 * Now "to" contains the most sorted list, so we swap "from" and
113 * "to" for the next iteration.
119 * If we ended with our data in the original array, great. If not,
120 * we have to move it back from the temporary storage.
123 COPY_ARRAY(entries
, tmp
, n
);
133 * Ordered list of offsets of objects in the pack.
135 static void create_pack_revindex(struct packed_git
*p
)
137 const unsigned num_ent
= p
->num_objects
;
139 const char *index
= p
->index_data
;
140 const unsigned hashsz
= the_hash_algo
->rawsz
;
142 ALLOC_ARRAY(p
->revindex
, num_ent
+ 1);
145 if (p
->index_version
> 1) {
146 const uint32_t *off_32
=
147 (uint32_t *)(index
+ 8 + (size_t)p
->num_objects
* (hashsz
+ 4));
148 const uint32_t *off_64
= off_32
+ p
->num_objects
;
149 for (i
= 0; i
< num_ent
; i
++) {
150 const uint32_t off
= ntohl(*off_32
++);
151 if (!(off
& 0x80000000)) {
152 p
->revindex
[i
].offset
= off
;
154 p
->revindex
[i
].offset
= get_be64(off_64
);
157 p
->revindex
[i
].nr
= i
;
160 for (i
= 0; i
< num_ent
; i
++) {
161 const uint32_t hl
= *((uint32_t *)(index
+ (hashsz
+ 4) * i
));
162 p
->revindex
[i
].offset
= ntohl(hl
);
163 p
->revindex
[i
].nr
= i
;
168 * This knows the pack format -- the hash trailer
169 * follows immediately after the last object data.
171 p
->revindex
[num_ent
].offset
= p
->pack_size
- hashsz
;
172 p
->revindex
[num_ent
].nr
= -1;
173 sort_revindex(p
->revindex
, num_ent
, p
->pack_size
);
176 static int create_pack_revindex_in_memory(struct packed_git
*p
)
178 if (git_env_bool(GIT_TEST_REV_INDEX_DIE_IN_MEMORY
, 0))
179 die("dying as requested by '%s'",
180 GIT_TEST_REV_INDEX_DIE_IN_MEMORY
);
181 if (open_pack_index(p
))
183 create_pack_revindex(p
);
187 static char *pack_revindex_filename(struct packed_git
*p
)
190 if (!strip_suffix(p
->pack_name
, ".pack", &len
))
191 BUG("pack_name does not end in .pack");
192 return xstrfmt("%.*s.rev", (int)len
, p
->pack_name
);
195 #define RIDX_HEADER_SIZE (12)
196 #define RIDX_MIN_SIZE (RIDX_HEADER_SIZE + (2 * the_hash_algo->rawsz))
198 struct revindex_header
{
204 static int load_revindex_from_disk(char *revindex_name
,
205 uint32_t num_objects
,
206 const uint32_t **data_p
, size_t *len_p
)
211 size_t revindex_size
;
212 struct revindex_header
*hdr
;
214 if (git_env_bool(GIT_TEST_REV_INDEX_DIE_ON_DISK
, 0))
215 die("dying as requested by '%s'", GIT_TEST_REV_INDEX_DIE_ON_DISK
);
217 fd
= git_open(revindex_name
);
220 /* "No file" means return 1. */
224 if (fstat(fd
, &st
)) {
225 ret
= error_errno(_("failed to read %s"), revindex_name
);
229 revindex_size
= xsize_t(st
.st_size
);
231 if (revindex_size
< RIDX_MIN_SIZE
) {
232 ret
= error(_("reverse-index file %s is too small"), revindex_name
);
236 if (revindex_size
- RIDX_MIN_SIZE
!= st_mult(sizeof(uint32_t), num_objects
)) {
237 ret
= error(_("reverse-index file %s is corrupt"), revindex_name
);
241 data
= xmmap(NULL
, revindex_size
, PROT_READ
, MAP_PRIVATE
, fd
, 0);
244 if (ntohl(hdr
->signature
) != RIDX_SIGNATURE
) {
245 ret
= error(_("reverse-index file %s has unknown signature"), revindex_name
);
248 if (ntohl(hdr
->version
) != 1) {
249 ret
= error(_("reverse-index file %s has unsupported version %"PRIu32
),
250 revindex_name
, ntohl(hdr
->version
));
253 if (!(ntohl(hdr
->hash_id
) == 1 || ntohl(hdr
->hash_id
) == 2)) {
254 ret
= error(_("reverse-index file %s has unsupported hash id %"PRIu32
),
255 revindex_name
, ntohl(hdr
->hash_id
));
262 munmap(data
, revindex_size
);
264 *len_p
= revindex_size
;
265 *data_p
= (const uint32_t *)data
;
273 int load_pack_revindex_from_disk(struct packed_git
*p
)
277 if (open_pack_index(p
))
280 revindex_name
= pack_revindex_filename(p
);
282 ret
= load_revindex_from_disk(revindex_name
,
289 p
->revindex_data
= (const uint32_t *)((const char *)p
->revindex_map
+ RIDX_HEADER_SIZE
);
296 int load_pack_revindex(struct repository
*r
, struct packed_git
*p
)
298 if (p
->revindex
|| p
->revindex_data
)
301 prepare_repo_settings(r
);
303 if (r
->settings
.pack_read_reverse_index
&&
304 !load_pack_revindex_from_disk(p
))
306 else if (!create_pack_revindex_in_memory(p
))
312 * verify_pack_revindex verifies that the on-disk rev-index for the given
313 * pack-file is the same that would be created if written from scratch.
315 * A negative number is returned on error.
317 int verify_pack_revindex(struct packed_git
*p
)
321 /* Do not bother checking if not initialized. */
322 if (!p
->revindex_map
|| !p
->revindex_data
)
325 if (!hashfile_checksum_valid((const unsigned char *)p
->revindex_map
, p
->revindex_size
)) {
326 error(_("invalid checksum"));
330 /* This may fail due to a broken .idx. */
331 if (create_pack_revindex_in_memory(p
))
334 for (size_t i
= 0; i
< p
->num_objects
; i
++) {
335 uint32_t nr
= p
->revindex
[i
].nr
;
336 uint32_t rev_val
= get_be32(p
->revindex_data
+ i
);
339 error(_("invalid rev-index position at %"PRIu64
": %"PRIu32
" != %"PRIu32
""),
340 (uint64_t)i
, nr
, rev_val
);
348 static int can_use_midx_ridx_chunk(struct multi_pack_index
*m
)
350 if (!m
->chunk_revindex
)
352 if (m
->chunk_revindex_len
!= st_mult(sizeof(uint32_t), m
->num_objects
)) {
353 error(_("multi-pack-index reverse-index chunk is the wrong size"));
359 int load_midx_revindex(struct multi_pack_index
*m
)
361 struct strbuf revindex_name
= STRBUF_INIT
;
364 if (m
->revindex_data
)
367 if (can_use_midx_ridx_chunk(m
)) {
369 * If the MIDX `m` has a `RIDX` chunk, then use its contents for
370 * the reverse index instead of trying to load a separate `.rev`
373 * Note that we do *not* set `m->revindex_map` here, since we do
374 * not want to accidentally call munmap() in the middle of the
377 trace2_data_string("load_midx_revindex", the_repository
,
379 m
->revindex_data
= (const uint32_t *)m
->chunk_revindex
;
383 trace2_data_string("load_midx_revindex", the_repository
,
386 get_midx_filename_ext(&revindex_name
, m
->object_dir
,
387 get_midx_checksum(m
), MIDX_EXT_REV
);
389 ret
= load_revindex_from_disk(revindex_name
.buf
,
396 m
->revindex_data
= (const uint32_t *)((const char *)m
->revindex_map
+ RIDX_HEADER_SIZE
);
399 strbuf_release(&revindex_name
);
403 int close_midx_revindex(struct multi_pack_index
*m
)
405 if (!m
|| !m
->revindex_map
)
408 munmap((void*)m
->revindex_map
, m
->revindex_len
);
410 m
->revindex_map
= NULL
;
411 m
->revindex_data
= NULL
;
417 int offset_to_pack_pos(struct packed_git
*p
, off_t ofs
, uint32_t *pos
)
421 if (load_pack_revindex(the_repository
, p
) < 0)
425 hi
= p
->num_objects
+ 1;
428 const unsigned mi
= lo
+ (hi
- lo
) / 2;
429 off_t got
= pack_pos_to_offset(p
, mi
);
434 } else if (ofs
< got
)
440 error("bad offset for revindex");
444 uint32_t pack_pos_to_index(struct packed_git
*p
, uint32_t pos
)
446 if (!(p
->revindex
|| p
->revindex_data
))
447 BUG("pack_pos_to_index: reverse index not yet loaded");
448 if (p
->num_objects
<= pos
)
449 BUG("pack_pos_to_index: out-of-bounds object at %"PRIu32
, pos
);
452 return p
->revindex
[pos
].nr
;
454 return get_be32(p
->revindex_data
+ pos
);
457 off_t
pack_pos_to_offset(struct packed_git
*p
, uint32_t pos
)
459 if (!(p
->revindex
|| p
->revindex_data
))
460 BUG("pack_pos_to_index: reverse index not yet loaded");
461 if (p
->num_objects
< pos
)
462 BUG("pack_pos_to_offset: out-of-bounds object at %"PRIu32
, pos
);
465 return p
->revindex
[pos
].offset
;
466 else if (pos
== p
->num_objects
)
467 return p
->pack_size
- the_hash_algo
->rawsz
;
469 return nth_packed_object_offset(p
, pack_pos_to_index(p
, pos
));
472 uint32_t pack_pos_to_midx(struct multi_pack_index
*m
, uint32_t pos
)
474 if (!m
->revindex_data
)
475 BUG("pack_pos_to_midx: reverse index not yet loaded");
476 if (m
->num_objects
<= pos
)
477 BUG("pack_pos_to_midx: out-of-bounds object at %"PRIu32
, pos
);
478 return get_be32(m
->revindex_data
+ pos
);
481 struct midx_pack_key
{
485 uint32_t preferred_pack
;
486 struct multi_pack_index
*midx
;
489 static int midx_pack_order_cmp(const void *va
, const void *vb
)
491 const struct midx_pack_key
*key
= va
;
492 struct multi_pack_index
*midx
= key
->midx
;
494 uint32_t versus
= pack_pos_to_midx(midx
, (uint32_t*)vb
- (const uint32_t *)midx
->revindex_data
);
495 uint32_t versus_pack
= nth_midxed_pack_int_id(midx
, versus
);
498 uint32_t key_preferred
= key
->pack
== key
->preferred_pack
;
499 uint32_t versus_preferred
= versus_pack
== key
->preferred_pack
;
502 * First, compare the preferred-ness, noting that the preferred pack
505 if (key_preferred
&& !versus_preferred
)
507 else if (!key_preferred
&& versus_preferred
)
510 /* Then, break ties first by comparing the pack IDs. */
511 if (key
->pack
< versus_pack
)
513 else if (key
->pack
> versus_pack
)
516 /* Finally, break ties by comparing offsets within a pack. */
517 versus_offset
= nth_midxed_offset(midx
, versus
);
518 if (key
->offset
< versus_offset
)
520 else if (key
->offset
> versus_offset
)
526 static int midx_key_to_pack_pos(struct multi_pack_index
*m
,
527 struct midx_pack_key
*key
,
532 if (key
->pack
>= m
->num_packs
)
533 BUG("MIDX pack lookup out of bounds (%"PRIu32
" >= %"PRIu32
")",
534 key
->pack
, m
->num_packs
);
536 * The preferred pack sorts first, so determine its identifier by
537 * looking at the first object in pseudo-pack order.
539 * Note that if no --preferred-pack is explicitly given when writing a
540 * multi-pack index, then whichever pack has the lowest identifier
541 * implicitly is preferred (and includes all its objects, since ties are
542 * broken first by pack identifier).
544 if (midx_preferred_pack(key
->midx
, &key
->preferred_pack
) < 0)
545 return error(_("could not determine preferred pack"));
547 found
= bsearch(key
, m
->revindex_data
, m
->num_objects
,
548 sizeof(*m
->revindex_data
),
549 midx_pack_order_cmp
);
554 *pos
= found
- m
->revindex_data
;
558 int midx_to_pack_pos(struct multi_pack_index
*m
, uint32_t at
, uint32_t *pos
)
560 struct midx_pack_key key
;
562 if (!m
->revindex_data
)
563 BUG("midx_to_pack_pos: reverse index not yet loaded");
564 if (m
->num_objects
<= at
)
565 BUG("midx_to_pack_pos: out-of-bounds object at %"PRIu32
, at
);
567 key
.pack
= nth_midxed_pack_int_id(m
, at
);
568 key
.offset
= nth_midxed_offset(m
, at
);
571 return midx_key_to_pack_pos(m
, &key
, pos
);
574 int midx_pair_to_pack_pos(struct multi_pack_index
*m
, uint32_t pack_int_id
,
575 off_t ofs
, uint32_t *pos
)
577 struct midx_pack_key key
= {
582 return midx_key_to_pack_pos(m
, &key
, pos
);